__put_user can write bytes, words (2 bytes) or longwords (4 bytes).
Here obviously words should have been written, but bytes were written,
so values like 0x9c5f were truncated to 0x5f.
Fix this by changing retcode from uint8_t to to uint16_t in
target_signal_frame and also in the unused rt_signal_frame.
This problem was reported by static code analysis (smatch).
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This is an internal error as the CRISv10 should mask interrupts
while executing delay slots. Bail out sooner rather than later.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This wires up a spice port event on virtio-ports open/close, so the
client is notified when the other end is ready.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Several small signedness / overflow corrections to qxl_create_guest_primary:
1. use 64 bit unsigned for size to avoid overflow possible from two 32
bit multiplicants.
2. correct sign for requested_height
3. add a more verbose error message when setting guest bug state (which
causes a complete guess blackout until reset, so it helps if it is
verbose).
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Without this we occasionally trigger an assert at
hw/pci/pci.c:pcibus_reset that asserts the irq_count is zero on reset.
This has become a problem with the new drm driver for linux, since doing
a reboot from console causes a race between console updates that set the
irq and the reset assertion that the irq is clear.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently we fail getattr request altogether if we can't read
P9_STATS_GEN for some reason. It breaks valid use cases:
E.g let's assume we have non-readable directory with execution bit set
on host and we export it to client over 9p On host we can chdir into
directory, but not open directory on read and list content.
But if client will try to call getattr (as part of chdir(2)) for the
directory it will fail with -EACCES. It happens because we try to open
the directory on read to call ioctl(FS_IOC_GETVERSION), it fails and we
return the error code to client.
It's excessive. The solution is to make P9_STATS_GEN failure non-fatal
for getattr request. Just don't set P9_STATS_GEN flag in result mask on
failure.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Currently we silently ignore getversion requests for anything except
file or directory. Let's instead return ENOTTY error to indicate that
getversion is not supported. It makes implementation consistent on
all not-supported cases.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
All get_st_gen() implementations except handle_ioc_getversion() have
guard for undefined FS_IOC_GETVERSION. Let's add it there too.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
v9fs_co_st_gen() expects to see error code in errno, not in return code.
Let's fix this.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
* implementation of first part of the A64 Neon instruction set
* v8 AArch32 rounding and 16<->64 fp conversion instructions
* fix MIDR value on Zynq boards
* some minor bugfixes/code cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=KIzb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20140131' into staging
target-arm queue:
* implementation of first part of the A64 Neon instruction set
* v8 AArch32 rounding and 16<->64 fp conversion instructions
* fix MIDR value on Zynq boards
* some minor bugfixes/code cleanups
# gpg: Signature made Fri 31 Jan 2014 15:06:34 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* pmaydell/tags/pull-target-arm-20140131: (34 commits)
arm_gic: Fix GICD_ICPENDR and GICD_ISPENDR writes
arm_gic: Introduce define for GIC_NR_SGIS
target-arm: A64: Add SIMD shift by immediate
target-arm: A64: Add simple SIMD 3-same floating point ops
target-arm: A64: Add integer ops from SIMD 3-same group
target-arm: A64: Add logic ops from SIMD 3 same group
target-arm: A64: Add top level decode for SIMD 3-same group
target-arm: A64: Add SIMD scalar 3 same add, sub and compare ops
target-arm: A64: Add SIMD three-different ABDL instructions
target-arm: A64: Add SIMD three-different multiply accumulate insns
target-arm: Add AArch32 SIMD VCVTA, VCVTN, VCVTP and VCVTM
target-arm: Add AArch32 FP VCVTA, VCVTN, VCVTP and VCVTM
target-arm: Add AArch32 SIMD VRINTA, VRINTN, VRINTP, VRINTM, VRINTZ
target-arm: Add set_neon_rmode helper
target-arm: Add support for AArch32 SIMD VRINTX
target-arm: Add support for AArch32 FP VRINTX
target-arm: Add support for AArch32 FP VRINTZ
target-arm: Add support for AArch32 FP VRINTR
target-arm: Add AArch32 FP VRINTA, VRINTN, VRINTP and VRINTM
target-arm: Move arm_rmode_to_sf to a shared location.
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a compiler warning with -Werror=missing-format-attribute
and allows improved compiler checks for variable argument lists.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit c9baa30f42 failed to
delete all of the relevant code, leading to Werrors about
unused symbols.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Instead of packing BiosLinkerLoaderEntry, an unused global variable called
QEMU_PACKED was created (detected by smatch static code analysis).
Including qemu-common.h gets the right definition and also includes some
standard include files which now can be removed here.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
osdep.c does not use trace_*() so we can just drop the include.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Do not rely on int8_t (and friends) not being preprocessor
symbols (or symbols expanding to themselves). On NetBSD (for example) the
glue(u, SDATA_TYPE) results in u__int8_t, which is undefined. There is no way
to stop cpp expanding inner macros, so just add the few lines explicitly and
get rid of the magic.
Signed-off-by: Martin Husemann <martin@NetBSD.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 071 test is designed for IMGFMT=qcow2 because it uses the l2_load
blkdebug event. Its output filtering also assumes that IMGFMT is not
raw since 071.out contains "format=raw" but IMGFMT=raw would filter the
output to "format=IMGFMT".
Perhaps the test case can be rewritten to be more generic, but for now
let's document that it was only supposed to work with qcow2.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Errors are inadvertently ignored in a few places. Has always been
broken. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is exactly assert_no_active_block_jobs in iotests.py
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this adds a basic vmdk corruption check. it should detect severe
table corruptions and file truncation.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The QCOW2 .bdrv_make_empty implementation always returns 0 for success,
but does not actually do anything.
The proper way to not support an optional driver function stub is to
just not implement it, so let's remove the stub.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The QED .bdrv_make_empty() implementation does nothing but return
-ENOTSUP, which causes problems in bdrv_commit(). Since the function
stub exists for QED, it is called, which then always returns an error.
The proper way to not support an optional driver function stub is to
just not implement it, so let's remove the stub.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qemu-img.texi / qemu-doc.texi files currently describe the
qcow2/qcow2 encryption thus
"Encryption uses the AES format which is very secure (128 bit
keys). Use a long password (16 characters) to get maximum
protection."
While AES is indeed a strong encryption system, the way that
QCow/QCow2 use it results in a poor/weak encryption system.
Due to the use of predictable IVs, based on the sector number
extended to 128 bits, it is vulnerable to chosen plaintext
attacks which can reveal the existence of encrypted data.
The direct use of the user passphrase as the encryption key
also leads to an inability to change the passphrase of an
image. If passphrase is ever compromised the image data will
all be vulnerable, since it cannot be re-encrypted. The admin
has to clone the image files with a new passphrase and then
use a program like shred to secure erase all the old files.
Recommend against any use of QCow/QCow2 encryption, directing
users to dm-crypt / LUKS which can meet modern cryptography
best practices.
[Changed "Qcow" to "qcow" for consistency.
--Stefan]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fix two bugs that would allow changing the state of SGIs through the
ICPENDR and ISPENDRs.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of hardcoding 16 various places in the code, use a define to
make it more clear what is going on.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This implements a subset of the AdvSIMD shift operations (namely all the
none saturating or narrowing ones). The actual shift generation code
itself is common for both the scalar and vector cases but wrapped with
either vector element iteration or the fp reg access.
The rounding operations need to take special care to correctly reflect
the result of adding rounding bits on high bits as the intermediates do
not truncate.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement a simple subset of the SIMD 3-same floating point
operations. This includes a common helper function used for both
scalar and vector ops; FABD is the only currently implemented
shared op.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add some of the integer operations in the SIMD 3-same group:
specifically, the comparisons, addition and subtraction.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the logical operations (ORR, AND, BIC, ORN, EOR, BSL,
BIT and BIF) from the SIMD 3 register same group (C3.6.16).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add top level decode for the A64 SIMD three regs same group
(C3.6.16), splitting it into the pairwise, logical, float and
integer subgroups.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the add, sub and compare ops from the SIMD "scalar three same"
group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the absolute-difference instructions in the SIMD
three-different group: SABAL, SABAL2, UABAL, UABAL2, SABDL,
SABDL2, UABDL, UABDL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the multiply-accumulate instructions from the
SIMD three-different instructions group (C3.6.15):
* skeleton decode of unallocated encodings and split of
the group into its three sub-parts
* framework for handling the 64x64->128 widening subpart
* implementation of the multiply-accumulate instructions
SMLAL, SMLAL2, UMLAL, UMLAL2, SMLSL, SMLSL2, UMLSL, UMLSL2,
UMULL, UMULL2, SMULL, SMULL2
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the AArch32 Advanced SIMD VCVTA, VCVTN, VCVTP
and VCVTM instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 floating-point VCVTA, VCVTN, VCVTP
and VCVTM instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 Advanced SIMD VRINTA, VRINTN, VRINTP
VRINTM and VRINTZ instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This helper sets the rounding mode in the standard_fp_status word to
allow NEON instructions to modify the rounding mode whilst using the
standard FPSCR values for everything else.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 Advanced SIMD VRINTX instruction.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 floating-point VRINTX instruction.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 floating-point VRINTZ instruction.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefan Weil