mirror of https://gitee.com/openkylin/qemu.git
266 lines
11 KiB
Plaintext
266 lines
11 KiB
Plaintext
QEMU Firmware Configuration (fw_cfg) Device
|
|
===========================================
|
|
|
|
= Guest-side Hardware Interface =
|
|
|
|
This hardware interface allows the guest to retrieve various data items
|
|
(blobs) that can influence how the firmware configures itself, or may
|
|
contain tables to be installed for the guest OS. Examples include device
|
|
boot order, ACPI and SMBIOS tables, virtual machine UUID, SMP and NUMA
|
|
information, kernel/initrd images for direct (Linux) kernel booting, etc.
|
|
|
|
== Selector (Control) Register ==
|
|
|
|
* Write only
|
|
* Location: platform dependent (IOport or MMIO)
|
|
* Width: 16-bit
|
|
* Endianness: little-endian (if IOport), or big-endian (if MMIO)
|
|
|
|
A write to this register sets the index of a firmware configuration
|
|
item which can subsequently be accessed via the data register.
|
|
|
|
Setting the selector register will cause the data offset to be set
|
|
to zero. The data offset impacts which data is accessed via the data
|
|
register, and is explained below.
|
|
|
|
Bit14 of the selector register indicates whether the configuration
|
|
setting is being written. A value of 0 means the item is only being
|
|
read, and all write access to the data port will be ignored. A value
|
|
of 1 means the item's data can be overwritten by writes to the data
|
|
register. In other words, configuration write mode is enabled when
|
|
the selector value is between 0x4000-0x7fff or 0xc000-0xffff.
|
|
|
|
NOTE: As of QEMU v2.4, writes to the fw_cfg data register are no
|
|
longer supported, and will be ignored (treated as no-ops)!
|
|
|
|
NOTE: As of QEMU v2.9, writes are reinstated, but only through the DMA
|
|
interface (see below). Furthermore, writeability of any specific item is
|
|
governed independently of Bit14 in the selector key value.
|
|
|
|
Bit15 of the selector register indicates whether the configuration
|
|
setting is architecture specific. A value of 0 means the item is a
|
|
generic configuration item. A value of 1 means the item is specific
|
|
to a particular architecture. In other words, generic configuration
|
|
items are accessed with a selector value between 0x0000-0x7fff, and
|
|
architecture specific configuration items are accessed with a selector
|
|
value between 0x8000-0xffff.
|
|
|
|
== Data Register ==
|
|
|
|
* Read/Write (writes ignored as of QEMU v2.4, but see the DMA interface)
|
|
* Location: platform dependent (IOport [*] or MMIO)
|
|
* Width: 8-bit (if IOport), 8/16/32/64-bit (if MMIO)
|
|
* Endianness: string-preserving
|
|
|
|
[*] On platforms where the data register is exposed as an IOport, its
|
|
port number will always be one greater than the port number of the
|
|
selector register. In other words, the two ports overlap, and can not
|
|
be mapped separately.
|
|
|
|
The data register allows access to an array of bytes for each firmware
|
|
configuration data item. The specific item is selected by writing to
|
|
the selector register, as described above.
|
|
|
|
Initially following a write to the selector register, the data offset
|
|
will be set to zero. Each successful access to the data register will
|
|
increment the data offset by the appropriate access width.
|
|
|
|
Each firmware configuration item has a maximum length of data
|
|
associated with the item. After the data offset has passed the
|
|
end of this maximum data length, then any reads will return a data
|
|
value of 0x00, and all writes will be ignored.
|
|
|
|
An N-byte wide read of the data register will return the next available
|
|
N bytes of the selected firmware configuration item, as a substring, in
|
|
increasing address order, similar to memcpy().
|
|
|
|
== Register Locations ==
|
|
|
|
=== x86, x86_64 Register Locations ===
|
|
|
|
Selector Register IOport: 0x510
|
|
Data Register IOport: 0x511
|
|
DMA Address IOport: 0x514
|
|
|
|
=== Arm Register Locations ===
|
|
|
|
Selector Register address: Base + 8 (2 bytes)
|
|
Data Register address: Base + 0 (8 bytes)
|
|
DMA Address address: Base + 16 (8 bytes)
|
|
|
|
== ACPI Interface ==
|
|
|
|
The fw_cfg device is defined with ACPI ID "QEMU0002". Since we expect
|
|
ACPI tables to be passed into the guest through the fw_cfg device itself,
|
|
the guest-side firmware can not use ACPI to find fw_cfg. However, once the
|
|
firmware is finished setting up ACPI tables and hands control over to the
|
|
guest kernel, the latter can use the fw_cfg ACPI node for a more accurate
|
|
inventory of in-use IOport or MMIO regions.
|
|
|
|
== Firmware Configuration Items ==
|
|
|
|
=== Signature (Key 0x0000, FW_CFG_SIGNATURE) ===
|
|
|
|
The presence of the fw_cfg selector and data registers can be verified
|
|
by selecting the "signature" item using key 0x0000 (FW_CFG_SIGNATURE),
|
|
and reading four bytes from the data register. If the fw_cfg device is
|
|
present, the four bytes read will contain the characters "QEMU".
|
|
|
|
If the DMA interface is available, then reading the DMA Address
|
|
Register returns 0x51454d5520434647 ("QEMU CFG" in big-endian format).
|
|
|
|
=== Revision / feature bitmap (Key 0x0001, FW_CFG_ID) ===
|
|
|
|
A 32-bit little-endian unsigned int, this item is used to check for enabled
|
|
features.
|
|
- Bit 0: traditional interface. Always set.
|
|
- Bit 1: DMA interface.
|
|
|
|
=== File Directory (Key 0x0019, FW_CFG_FILE_DIR) ===
|
|
|
|
Firmware configuration items stored at selector keys 0x0020 or higher
|
|
(FW_CFG_FILE_FIRST or higher) have an associated entry in a directory
|
|
structure, which makes it easier for guest-side firmware to identify
|
|
and retrieve them. The format of this file directory (from fw_cfg.h in
|
|
the QEMU source tree) is shown here, slightly annotated for clarity:
|
|
|
|
struct FWCfgFiles { /* the entire file directory fw_cfg item */
|
|
uint32_t count; /* number of entries, in big-endian format */
|
|
struct FWCfgFile f[]; /* array of file entries, see below */
|
|
};
|
|
|
|
struct FWCfgFile { /* an individual file entry, 64 bytes total */
|
|
uint32_t size; /* size of referenced fw_cfg item, big-endian */
|
|
uint16_t select; /* selector key of fw_cfg item, big-endian */
|
|
uint16_t reserved;
|
|
char name[56]; /* fw_cfg item name, NUL-terminated ascii */
|
|
};
|
|
|
|
=== All Other Data Items ===
|
|
|
|
Please consult the QEMU source for the most up-to-date and authoritative list
|
|
of selector keys and their respective items' purpose, format and writeability.
|
|
|
|
=== Ranges ===
|
|
|
|
Theoretically, there may be up to 0x4000 generic firmware configuration
|
|
items, and up to 0x4000 architecturally specific ones.
|
|
|
|
Selector Reg. Range Usage
|
|
--------------- -----------
|
|
0x0000 - 0x3fff Generic (0x0000 - 0x3fff, generally RO, possibly RW through
|
|
the DMA interface in QEMU v2.9+)
|
|
0x4000 - 0x7fff Generic (0x0000 - 0x3fff, RW, ignored in QEMU v2.4+)
|
|
0x8000 - 0xbfff Arch. Specific (0x0000 - 0x3fff, generally RO, possibly RW
|
|
through the DMA interface in QEMU v2.9+)
|
|
0xc000 - 0xffff Arch. Specific (0x0000 - 0x3fff, RW, ignored in v2.4+)
|
|
|
|
In practice, the number of allowed firmware configuration items depends on the
|
|
machine type/version.
|
|
|
|
= Guest-side DMA Interface =
|
|
|
|
If bit 1 of the feature bitmap is set, the DMA interface is present. This does
|
|
not replace the existing fw_cfg interface, it is an add-on. This interface
|
|
can be used through the 64-bit wide address register.
|
|
|
|
The address register is in big-endian format. The value for the register is 0
|
|
at startup and after an operation. A write to the least significant half (at
|
|
offset 4) triggers an operation. This means that operations with 32-bit
|
|
addresses can be triggered with just one write, whereas operations with
|
|
64-bit addresses can be triggered with one 64-bit write or two 32-bit writes,
|
|
starting with the most significant half (at offset 0).
|
|
|
|
In this register, the physical address of a FWCfgDmaAccess structure in RAM
|
|
should be written. This is the format of the FWCfgDmaAccess structure:
|
|
|
|
typedef struct FWCfgDmaAccess {
|
|
uint32_t control;
|
|
uint32_t length;
|
|
uint64_t address;
|
|
} FWCfgDmaAccess;
|
|
|
|
The fields of the structure are in big endian mode, and the field at the lowest
|
|
address is the "control" field.
|
|
|
|
The "control" field has the following bits:
|
|
- Bit 0: Error
|
|
- Bit 1: Read
|
|
- Bit 2: Skip
|
|
- Bit 3: Select. The upper 16 bits are the selected index.
|
|
- Bit 4: Write
|
|
|
|
When an operation is triggered, if the "control" field has bit 3 set, the
|
|
upper 16 bits are interpreted as an index of a firmware configuration item.
|
|
This has the same effect as writing the selector register.
|
|
|
|
If the "control" field has bit 1 set, a read operation will be performed.
|
|
"length" bytes for the current selector and offset will be copied into the
|
|
physical RAM address specified by the "address" field.
|
|
|
|
If the "control" field has bit 4 set (and not bit 1), a write operation will be
|
|
performed. "length" bytes will be copied from the physical RAM address
|
|
specified by the "address" field to the current selector and offset. QEMU
|
|
prevents starting or finishing the write beyond the end of the item associated
|
|
with the current selector (i.e., the item cannot be resized). Truncated writes
|
|
are dropped entirely. Writes to read-only items are also rejected. All of these
|
|
write errors set bit 0 (the error bit) in the "control" field.
|
|
|
|
If the "control" field has bit 2 set (and neither bit 1 nor bit 4), a skip
|
|
operation will be performed. The offset for the current selector will be
|
|
advanced "length" bytes.
|
|
|
|
To check the result, read the "control" field:
|
|
error bit set -> something went wrong.
|
|
all bits cleared -> transfer finished successfully.
|
|
otherwise -> transfer still in progress (doesn't happen
|
|
today due to implementation not being async,
|
|
but may in the future).
|
|
|
|
= Externally Provided Items =
|
|
|
|
Since v2.4, "file" fw_cfg items (i.e., items with selector keys above
|
|
FW_CFG_FILE_FIRST, and with a corresponding entry in the fw_cfg file
|
|
directory structure) may be inserted via the QEMU command line, using
|
|
the following syntax:
|
|
|
|
-fw_cfg [name=]<item_name>,file=<path>
|
|
|
|
Or
|
|
|
|
-fw_cfg [name=]<item_name>,string=<string>
|
|
|
|
Since v5.1, QEMU allows some objects to generate fw_cfg-specific content,
|
|
the content is then associated with a "file" item using the 'gen_id' option
|
|
in the command line, using the following syntax:
|
|
|
|
-object <generator-type>,id=<generated_id>,[generator-specific-options] \
|
|
-fw_cfg [name=]<item_name>,gen_id=<generated_id>
|
|
|
|
See QEMU man page for more documentation.
|
|
|
|
Using item_name with plain ASCII characters only is recommended.
|
|
|
|
Item names beginning with "opt/" are reserved for users. QEMU will
|
|
never create entries with such names unless explicitly ordered by the
|
|
user.
|
|
|
|
To avoid clashes among different users, it is strongly recommended
|
|
that you use names beginning with opt/RFQDN/, where RFQDN is a reverse
|
|
fully qualified domain name you control. For instance, if SeaBIOS
|
|
wanted to define additional names, the prefix "opt/org.seabios/" would
|
|
be appropriate.
|
|
|
|
For historical reasons, "opt/ovmf/" is reserved for OVMF firmware.
|
|
|
|
Prefix "opt/org.qemu/" is reserved for QEMU itself.
|
|
|
|
Use of names not beginning with "opt/" is potentially dangerous and
|
|
entirely unsupported. QEMU will warn if you try.
|
|
|
|
Use of names not beginning with "opt/" is tolerated with 'gen_id' (that
|
|
is, the warning is suppressed), but you must know exactly what you're
|
|
doing.
|
|
|
|
All externally provided fw_cfg items are read-only to the guest.
|