Go to file
Paolo Bonzini 4e02b0fcf5 serial: reset thri_pending on IER writes with THRI=0
This is responsible for failure of migration from 2.2 to 2.1, because
thr_ipending is always one in practice.

serial.c is setting thr_ipending unconditionally.  However, thr_ipending
is not used at all if THRI=0, and it will be overwritten again the next
time THRE or THRI changes.  For that reason, we can set thr_ipending to
zero every time THRI is reset.

There is disagreement on whether LSR.THRE should be resampled when IER.THRI
goes from 1 to 1.  This patch does not touch the code, leaving that for
QEMU 2.3+.

This has no semantic change and is enough to fix migration in the common
case where the interrupt is not pending or is reported in IIR.  It does not
change the migration format, so 2.2.0 -> 2.1 will remain broken but we
can fix 2.2.1 -> 2.1 without breaking 2.2.1 <-> 2.2.0.

The case that remains broken (the one in which the subsection is strictly
necessary) is when THRE=1, the THRI interrupt has *not* been acknowledged
yet, and a higher-priority interrupt comes.  In this case, you need the
subsection to tell the source that the lower-priority THRI interrupt is
pending.  The subsection's breakage of migration, in this case, prevents
continuing the VM on the destination with an invalid state.

Cc: qemu-stable@nongnu.org
Reported-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15 14:35:53 +01:00
audio audio: Drop superfluous conditionals around g_free() 2014-06-13 12:34:54 +02:00
backends pci, pc, virtio, misc bugfixes 2014-09-18 20:02:01 +01:00
block Revert "qemu-img info: show nocow info" 2014-11-24 13:52:10 +01:00
bsd-user bsd-user: Fix syscall format, add strace support for more syscalls 2014-06-11 00:25:06 +01:00
default-configs mips: Remove CONFIG_VT82C686 from non-Fulong configs 2014-11-07 11:15:49 +00:00
disas disas/mips.c: disassemble MSA instructions 2014-11-03 11:48:35 +00:00
docs Tracing docs fix configure option and description 2014-11-18 14:05:54 +00:00
dtc@bc895d6d09 dtc: add submodule 2013-04-18 13:50:53 +02:00
fpu softfloat: add functions corresponding to IEEE-2008 min/maxNumMag 2014-10-14 13:28:51 +01:00
fsdev virtfs-proxy-helper: fix call to accept 2014-04-28 08:55:32 +04:00
gdb-xml s390x/gdb: add the feature xml files for s390x 2014-09-01 09:45:19 +02:00
hw serial: reset thri_pending on IER writes with THRI=0 2014-12-15 14:35:53 +01:00
include kvm/apic: fix 2.2->2.1 migration 2014-12-15 12:21:02 +01:00
libcacard libcacard: fix resource leak 2014-11-14 12:15:40 +01:00
libdecnumber libdecnumber: Fix warnings from smatch (missing static, boolean operations) 2014-08-24 13:21:06 +04:00
linux-headers linux-headers: update to 3.18-rc5 2014-11-18 11:24:31 +00:00
linux-user linux-user: Fix up timer id handling 2014-11-11 08:13:09 +02:00
net net/socket: fix Uninitialized scalar variable 2014-11-21 10:50:54 +00:00
pc-bios linuxboot: fix loading old kernels 2014-12-15 12:21:03 +01:00
pixman@87eea99e44 pixman: update internal copy to pixman-0.32.6 2014-09-15 08:14:19 +02:00
po po: fix conflict with %.mo rule in rules.mak 2014-09-26 13:35:08 +02:00
qapi Revert "qemu-img info: show nocow info" 2014-11-24 13:52:10 +01:00
qga qga: fix false negative argument passing 2014-11-17 11:41:25 +01:00
qobject json-lexer: fix escaped backslash in single-quoted string 2014-06-23 11:01:24 -04:00
qom qom/cpu: remove the unused CPU hot-plug notifier 2014-11-02 13:44:11 +02:00
roms Update OpenBIOS images 2014-11-15 13:01:44 +00:00
scripts Tracing: Fix simpletrace.py error on tcg enabled binary traces 2014-11-18 14:05:58 +00:00
slirp slirp: udp: fix NULL pointer dereference because of uninitialized socket 2014-09-23 19:15:05 +01:00
stubs block: Code motion to get rid of stubs/blockdev.c 2014-10-20 13:41:26 +02:00
sysconfigs/target Eliminate cpus-x86_64.conf file 2012-09-21 15:12:58 +02:00
target-alpha target-alpha: Use cpu_exec_interrupt qom hook 2014-09-25 18:54:21 +01:00
target-arm target-arm: handle address translations that start at level 3 2014-11-17 19:30:28 +00:00
target-cris target-cris/translate.c: fix out of bounds read 2014-11-17 13:59:23 +01:00
target-i386 target-i386: add Ivy Bridge CPU model 2014-12-15 12:21:02 +01:00
target-lm32 gdbstub: Allow target CPUs to specify watchpoint STOP_BEFORE_ACCESS flag 2014-10-06 14:25:43 +01:00
target-m68k target-m68k: Use cpu_exec_interrupt qom hook 2014-09-25 18:54:21 +01:00
target-microblaze target-microblaze: Use cpu_exec_interrupt qom hook 2014-09-25 18:54:22 +01:00
target-mips target-mips: kvm: do not use get_clock() 2014-12-15 12:21:01 +01:00
target-moxie softmmu: introduce cpu_ldst.h 2014-06-05 16:10:33 +02:00
target-openrisc target-openrisc: Use cpu_exec_interrupt qom hook 2014-09-25 18:54:22 +01:00
target-ppc target-ppc: Altivec's mtvscr Decodes Wrong Register 2014-11-20 14:52:01 +01:00
target-s390x valgrind/s390x: avoid false positives on KVM_SET_FPU ioctl 2014-12-15 12:21:01 +01:00
target-sh4 target-sh4: Use cpu_exec_interrupt qom hook 2014-09-25 18:54:22 +01:00
target-sparc target-sparc: Use cpu_exec_interrupt qom hook 2014-09-25 18:54:22 +01:00
target-tricore target-tricore: Add instructions of BO opcode format 2014-10-20 12:25:07 +01:00
target-unicore32 target-unicore32: Use cpu_exec_interrupt qom hook 2014-09-25 18:54:22 +01:00
target-xtensa target-xtensa: add missing window check for entry 2014-11-10 17:59:13 +03:00
tcg tcg/mips: fix store softmmu slow path 2014-11-02 13:30:00 +01:00
tests target-i386: move generic memory hotplug methods to DSDTs 2014-11-24 20:57:10 +02:00
trace trace: [hmp] Reimplement "trace-event" and "info trace-events" using QMP 2014-09-26 09:34:38 +01:00
ui input: move input-send-event into experimental namespace 2014-11-25 17:03:31 +00:00
util memory: expose alignment used for allocating RAM as MemoryRegion API 2014-11-23 12:11:30 +02:00
.exrc qemu: add .exrc 2012-09-07 09:02:44 +03:00
.gitignore trace: [tcg] Generate TCG tracing routines 2014-08-12 14:26:12 +01:00
.gitmodules PPC: Add u-boot firmware for e500 2014-06-16 13:24:35 +02:00
.mailmap Update mailmap 2013-09-05 09:40:31 -05:00
.travis.yml .travis.yml: remove "make check" from main matrix 2014-09-26 21:05:06 +04:00
CODING_STYLE CODING_STYLE: Section about conditional statement 2014-08-15 18:54:06 +04:00
COPYING
COPYING.LIB
Changelog Use qemu-project.org domain name 2013-10-11 09:34:56 -07:00
HACKING HACKING: Document vaddr type usage 2013-07-23 02:41:31 +02:00
LICENSE LICENSE: clarify 2013-08-12 09:15:12 -05:00
MAINTAINERS Add Migration maintainer 2014-11-11 09:46:46 +01:00
Makefile trace: install trace-events file 2014-09-26 09:34:39 +01:00
Makefile.objs qemu-file: Move stdio implementation to qemu-file-stdio.c 2014-10-14 10:29:28 +02:00
Makefile.target bootdevice: move bootdevice related code to new file bootdevice.c 2014-10-15 09:49:48 +02:00
README Use qemu-project.org domain name 2013-10-11 09:34:56 -07:00
VERSION Update version for v2.2.0-rc3 release 2014-11-25 18:23:54 +00:00
accel.c accel: Create accel object when initializing machine 2014-10-09 15:36:14 +02:00
aio-posix.c AioContext: introduce aio_prepare 2014-08-29 10:46:58 +01:00
aio-win32.c aio-win32: avoid out-of-bounds access to the events array 2014-09-22 11:39:21 +01:00
arch_init.c migration: static variables will not be reset at second migration 2014-11-20 18:17:22 +05:30
async.c async: aio_context_new(): Handle event_notifier_init failure 2014-09-22 11:39:48 +01:00
balloon.c qapi event: convert BALLOON_CHANGE 2014-06-23 11:12:28 -04:00
block-migration.c block: Rename BlockDriverAIOCB* to BlockAIOCB* 2014-10-20 13:41:27 +02:00
block.c block: Fix max nb_sectors in bdrv_make_zero 2014-11-14 09:20:35 +00:00
blockdev-nbd.c block: Use g_new() & friends where that makes obvious sense 2014-08-20 11:51:28 +02:00
blockdev.c block: let commit blockjob run in BDS AioContext 2014-11-03 11:41:49 +00:00
blockjob.c block: declare blockjobs and dataplane friends! 2014-11-03 11:41:49 +00:00
bootdevice.c bootindex: change fprintf to error_report 2014-10-15 10:46:01 +02:00
bt-host.c sysemu: avoid proliferation of include/ subdirectories 2013-04-15 18:19:25 +02:00
bt-vhci.c sysemu: avoid proliferation of include/ subdirectories 2013-04-15 18:19:25 +02:00
configure seccomp: change configure to avoid arm 32 to break 2014-11-11 17:05:21 +01:00
coroutine-gthread.c glib-compat.h: add new thread API emulation on top of pre-2.31 API 2014-06-10 07:44:01 +02:00
coroutine-sigaltstack.c coroutine-sigaltstack: Change jmp_buf to sigjmp_buf 2014-11-11 11:07:55 +03:00
coroutine-ucontext.c Fix warnings suppressors to honor --disable-werror 2013-04-17 10:28:04 -05:00
coroutine-win32.c coroutine-win32.c: Add noinline attribute to work around gcc bug 2014-06-26 14:08:14 +01:00
cpu-exec.c cpu-exec: invalidate nocache translation if they are interrupted 2014-12-15 12:21:02 +01:00
cpus.c cpus: make icount warp behave well with respect to stop/cont 2014-12-15 12:21:02 +01:00
cputlb.c implementing victim TLB for QEMU system emulated TLB 2014-09-01 17:43:06 +01:00
device-hotplug.c blockdev: Eliminate drive_del() 2014-10-20 13:41:26 +02:00
device_tree.c device_tree.c: dump all err mesages with error_report 2014-09-02 22:38:16 +04:00
disas.c monitor: QEMU Monitor Instruction Disassembly Incorrect for PowerPC LE Mode 2014-06-16 13:24:26 +02:00
dma-helpers.c hw: Convert from BlockDriverState to BlockBackend, mostly 2014-10-20 14:02:25 +02:00
dump.c dump: Fix dump-guest-memory termination and use-after-close 2014-11-02 10:04:34 +03:00
exec.c memory: expose alignment used for allocating RAM as MemoryRegion API 2014-11-23 12:11:30 +02:00
gdbstub.c gdbstub: Add a missing case of signal number translation in gdbstub 2014-11-11 08:58:30 +03:00
hmp-commands.hx hmp: Remove "info pcmcia" 2014-10-24 12:19:11 +01:00
hmp.c Add HMP command "info memory-devices" 2014-09-26 13:37:06 -04:00
hmp.h Add HMP command "info memory-devices" 2014-09-26 13:37:06 -04:00
iohandler.c iohandler.c: Properly initialize sigaction struct 2014-05-24 00:07:29 +04:00
ioport.c memory: convert memory_region_destroy to object_unparent 2014-08-18 12:06:20 +02:00
iothread.c async: aio_context_new(): Handle event_notifier_init failure 2014-09-22 11:39:48 +01:00
kvm-all.c coverity/s390x: avoid false positive in kvm_irqchip_add_adapter_route 2014-12-15 12:21:01 +01:00
kvm-stub.c pc: kvm: check if KVM has free memory slots to avoid abort() 2014-11-23 12:11:29 +02:00
main-loop.c Revert "main-loop.c: Handle SIGINT, SIGHUP and SIGTERM synchronously" 2014-10-27 15:05:09 +00:00
memory.c memory: expose alignment used for allocating RAM as MemoryRegion API 2014-11-23 12:11:30 +02:00
memory_mapping.c Add skip_dump flag to ignore memory region during dump 2014-10-31 11:29:01 +01:00
migration-exec.c aio / timers: Untangle include files 2013-08-22 19:10:27 +02:00
migration-fd.c aio / timers: Untangle include files 2013-08-22 19:10:27 +02:00
migration-rdma.c rdma: Fix incorrect description in comments 2014-09-20 17:55:53 +04:00
migration-tcp.c qemu-sockets: Add error to non-blocking connect handler 2014-10-09 15:36:15 +02:00
migration-unix.c qemu-sockets: Add error to non-blocking connect handler 2014-10-09 15:36:15 +02:00
migration.c block/migration: Disable cache invalidate for incoming migration 2014-10-14 09:35:21 +02:00
module-common.c module: implement module loading 2014-02-20 13:14:18 +01:00
monitor.c trivial patches for 2014-11-11 2014-11-11 14:50:10 +00:00
nbd.c block/migration: Disable cache invalidate for incoming migration 2014-10-14 09:35:21 +02:00
numa.c numa: make 'info numa' take into account hotplugged memory 2014-11-11 08:50:58 +03:00
os-posix.c os-posix: reorder parent notification for -daemonize 2014-11-02 10:04:34 +03:00
os-win32.c pidfile: stop making pidfile error a special case 2014-11-02 10:04:34 +03:00
page_cache.c migration: Plug memory leak in migrate-set-cache-size command 2014-06-10 19:54:43 +04:00
qapi-schema.json input: move input-send-event into experimental namespace 2014-11-25 17:03:31 +00:00
qdev-monitor.c qdev: Use qdev_get_device_class() for -device <type>,help 2014-11-04 17:50:00 +01:00
qdict-test-data.txt
qemu-bridge-helper.c qemu-bridge-helper: Fix fd leak in main() 2014-06-27 10:39:10 +02:00
qemu-char.c qemu-char: fix tcp_get_fds 2014-11-23 12:11:29 +02:00
qemu-coroutine-io.c qemu-coroutine-io: fix for Win32 2014-08-29 10:46:58 +01:00
qemu-coroutine-lock.c coroutine: remove qemu_co_queue_wait_insert_head 2013-12-02 17:11:49 +01:00
qemu-coroutine-sleep.c coroutine: Drop co_sleep_ns 2014-08-29 10:46:58 +01:00
qemu-coroutine.c coroutine: make pool size dynamic 2014-08-15 15:07:14 +02:00
qemu-doc.texi qemu-doc.texi: fix typos in x509 examples 2014-11-05 09:53:18 +03:00
qemu-file-stdio.c qemu-file: Move stdio implementation to qemu-file-stdio.c 2014-10-14 10:29:28 +02:00
qemu-file-unix.c qemu-file: Move unix and socket implementations to qemu-file-unix.c 2014-10-14 10:29:28 +02:00
qemu-file.c qemu-file: Move stdio implementation to qemu-file-stdio.c 2014-10-14 10:29:28 +02:00
qemu-img-cmds.hx qemu-img: Add progress output for amend 2014-11-03 11:41:48 +00:00
qemu-img.c qemu-img: Omit error_report() after img_open() 2014-11-06 12:45:47 +01:00
qemu-img.texi qemu-img: Add progress output for amend 2014-11-03 11:41:48 +00:00
qemu-io-cmds.c qemu-io: Respect early image end for map 2014-10-23 15:34:02 +02:00
qemu-io.c block: Make BlockBackend own its BlockDriverState 2014-10-20 13:41:26 +02:00
qemu-log.c qemu-log: default to stderr for logging output 2013-02-26 13:31:47 -06:00
qemu-nbd.c block: Make BlockBackend own its BlockDriverState 2014-10-20 13:41:26 +02:00
qemu-nbd.texi nbd: Miscellaneous typo fixes. 2014-05-24 00:07:29 +04:00
qemu-options-wrapper.h vl.c: In qemu -h output, only print options for the arch we are running as 2011-12-19 10:27:33 -06:00
qemu-options.h vl.c: Move option generation logic into a wrapper file 2011-12-19 10:27:33 -06:00
qemu-options.hx -machine vmport=off: Allow disabling of VMWare ioport emulation 2014-11-02 13:44:12 +02:00
qemu-seccomp.c seccomp: whitelist syscalls fallocate(), fadvise64(), inotify_init1() and inotify_add_watch() 2014-11-11 17:01:35 +01:00
qemu-tech.texi qemu-tech.texi: update implemented xtensa features list 2012-11-29 13:00:52 -06:00
qemu-timer.c timer: introduce new QEMU_CLOCK_VIRTUAL_RT clock 2014-12-15 12:21:02 +01:00
qemu.nsi nsis: Improved support for parallel installation of 32 and 64 bit code 2013-11-07 07:02:44 +01:00
qemu.sasl sasl: Avoid 'Could not find keytab file' in syslog 2014-03-15 13:54:18 +04:00
qmp-commands.hx input: move input-send-event into experimental namespace 2014-11-25 17:03:31 +00:00
qmp.c qmp: Print descriptions of object properties 2014-10-15 05:03:15 +02:00
qtest.c qtest: fix qtest log fd should be initialized before qtest chardev 2014-10-23 16:41:27 +02:00
rules.mak rules.mak: Allow .mo-objs and .mo-cflags in -y variables 2014-10-31 11:26:25 +01:00
savevm.c snapshot: Reset err to NULL to avoid double free 2014-11-03 09:48:41 +00:00
softmmu_template.h softmmu: provide softmmu access type enum 2014-11-03 11:48:34 +00:00
spice-qemu-char.c qemu-char: Rename register_char_driver_qapi() to register_char_driver() 2014-09-16 23:36:32 +01:00
tcg-runtime.c tcg: Push tcg-runtime routines into exec/helper-* 2014-05-28 09:33:54 -07:00
tci.c Merge remote-tracking branch 'remotes/bonzini/softmmu-smap' into staging 2014-06-05 21:06:14 +01:00
thread-pool.c block: Rename BlockDriverCompletionFunc to BlockCompletionFunc 2014-10-20 13:41:27 +02:00
thunk.c exec: move include files to include/exec/ 2012-12-19 08:31:31 +01:00
tpm.c Use error_is_set() only when necessary 2014-02-17 11:57:23 -05:00
trace-events megasas: Fixup MSI-X handling 2014-10-31 11:29:01 +01:00
translate-all.c cpu-exec: invalidate nocache translation if they are interrupted 2014-12-15 12:21:02 +01:00
translate-all.h translate-all: Change tb_check_watchpoint() argument to CPUState 2014-03-13 19:20:48 +01:00
user-exec.c softmmu: introduce cpu_ldst.h 2014-06-05 16:10:33 +02:00
version.rc Use qemu-project.org domain name 2013-10-11 09:34:56 -07:00
vl.c sysbus: Make devices spawnable via -device 2014-11-04 23:26:14 +01:00
vmstate.c vmstate: Allow dynamic allocation for VBUFFER during migration 2014-10-14 09:35:48 +02:00
xbzrle.c xbzrle.c: Avoid undefined behaviour with signed arithmetic 2014-04-18 10:33:36 +04:00
xen-common-stub.c accel: Move Xen registration code to xen-common.c 2014-10-04 08:59:15 +02:00
xen-common.c accel: Pass MachineState object to accel init functions 2014-10-09 12:57:10 +02:00
xen-hvm-stub.c xen-hvm: Fix xen_hvm_init() to adjust pc memory layout 2014-06-23 17:50:04 +03:00
xen-hvm.c xen-hvm: Remove redundant variable 'xstate' 2014-11-11 17:34:53 +03:00
xen-mapcache.c xen: build on ARM 2014-07-07 10:37:40 +00:00

README

Read the documentation in qemu-doc.html or on http://wiki.qemu-project.org

- QEMU team