mirror of https://gitee.com/openkylin/qemu.git
245 lines
11 KiB
Plaintext
245 lines
11 KiB
Plaintext
The memory API
|
|
==============
|
|
|
|
The memory API models the memory and I/O buses and controllers of a QEMU
|
|
machine. It attempts to allow modelling of:
|
|
|
|
- ordinary RAM
|
|
- memory-mapped I/O (MMIO)
|
|
- memory controllers that can dynamically reroute physical memory regions
|
|
to different destinations
|
|
|
|
The memory model provides support for
|
|
|
|
- tracking RAM changes by the guest
|
|
- setting up coalesced memory for kvm
|
|
- setting up ioeventfd regions for kvm
|
|
|
|
Memory is modelled as an acyclic graph of MemoryRegion objects. Sinks
|
|
(leaves) are RAM and MMIO regions, while other nodes represent
|
|
buses, memory controllers, and memory regions that have been rerouted.
|
|
|
|
In addition to MemoryRegion objects, the memory API provides AddressSpace
|
|
objects for every root and possibly for intermediate MemoryRegions too.
|
|
These represent memory as seen from the CPU or a device's viewpoint.
|
|
|
|
Types of regions
|
|
----------------
|
|
|
|
There are four types of memory regions (all represented by a single C type
|
|
MemoryRegion):
|
|
|
|
- RAM: a RAM region is simply a range of host memory that can be made available
|
|
to the guest.
|
|
|
|
- MMIO: a range of guest memory that is implemented by host callbacks;
|
|
each read or write causes a callback to be called on the host.
|
|
|
|
- container: a container simply includes other memory regions, each at
|
|
a different offset. Containers are useful for grouping several regions
|
|
into one unit. For example, a PCI BAR may be composed of a RAM region
|
|
and an MMIO region.
|
|
|
|
A container's subregions are usually non-overlapping. In some cases it is
|
|
useful to have overlapping regions; for example a memory controller that
|
|
can overlay a subregion of RAM with MMIO or ROM, or a PCI controller
|
|
that does not prevent card from claiming overlapping BARs.
|
|
|
|
- alias: a subsection of another region. Aliases allow a region to be
|
|
split apart into discontiguous regions. Examples of uses are memory banks
|
|
used when the guest address space is smaller than the amount of RAM
|
|
addressed, or a memory controller that splits main memory to expose a "PCI
|
|
hole". Aliases may point to any type of region, including other aliases,
|
|
but an alias may not point back to itself, directly or indirectly.
|
|
|
|
It is valid to add subregions to a region which is not a pure container
|
|
(that is, to an MMIO, RAM or ROM region). This means that the region
|
|
will act like a container, except that any addresses within the container's
|
|
region which are not claimed by any subregion are handled by the
|
|
container itself (ie by its MMIO callbacks or RAM backing). However
|
|
it is generally possible to achieve the same effect with a pure container
|
|
one of whose subregions is a low priority "background" region covering
|
|
the whole address range; this is often clearer and is preferred.
|
|
Subregions cannot be added to an alias region.
|
|
|
|
Region names
|
|
------------
|
|
|
|
Regions are assigned names by the constructor. For most regions these are
|
|
only used for debugging purposes, but RAM regions also use the name to identify
|
|
live migration sections. This means that RAM region names need to have ABI
|
|
stability.
|
|
|
|
Region lifecycle
|
|
----------------
|
|
|
|
A region is created by one of the constructor functions (memory_region_init*())
|
|
and attached to an object. It is then destroyed by object_unparent() or simply
|
|
when the parent object dies.
|
|
|
|
In between, a region can be added to an address space
|
|
by using memory_region_add_subregion() and removed using
|
|
memory_region_del_subregion(). Destroying the region implicitly
|
|
removes the region from the address space.
|
|
|
|
Region attributes may be changed at any point; they take effect once
|
|
the region becomes exposed to the guest.
|
|
|
|
Overlapping regions and priority
|
|
--------------------------------
|
|
Usually, regions may not overlap each other; a memory address decodes into
|
|
exactly one target. In some cases it is useful to allow regions to overlap,
|
|
and sometimes to control which of an overlapping regions is visible to the
|
|
guest. This is done with memory_region_add_subregion_overlap(), which
|
|
allows the region to overlap any other region in the same container, and
|
|
specifies a priority that allows the core to decide which of two regions at
|
|
the same address are visible (highest wins).
|
|
Priority values are signed, and the default value is zero. This means that
|
|
you can use memory_region_add_subregion_overlap() both to specify a region
|
|
that must sit 'above' any others (with a positive priority) and also a
|
|
background region that sits 'below' others (with a negative priority).
|
|
|
|
If the higher priority region in an overlap is a container or alias, then
|
|
the lower priority region will appear in any "holes" that the higher priority
|
|
region has left by not mapping subregions to that area of its address range.
|
|
(This applies recursively -- if the subregions are themselves containers or
|
|
aliases that leave holes then the lower priority region will appear in these
|
|
holes too.)
|
|
|
|
For example, suppose we have a container A of size 0x8000 with two subregions
|
|
B and C. B is a container mapped at 0x2000, size 0x4000, priority 1; C is
|
|
an MMIO region mapped at 0x0, size 0x6000, priority 2. B currently has two
|
|
of its own subregions: D of size 0x1000 at offset 0 and E of size 0x1000 at
|
|
offset 0x2000. As a diagram:
|
|
|
|
0 1000 2000 3000 4000 5000 6000 7000 8000
|
|
|------|------|------|------|------|------|------|-------|
|
|
A: [ ]
|
|
C: [CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC]
|
|
B: [ ]
|
|
D: [DDDDD]
|
|
E: [EEEEE]
|
|
|
|
The regions that will be seen within this address range then are:
|
|
[CCCCCCCCCCCC][DDDDD][CCCCC][EEEEE][CCCCC]
|
|
|
|
Since B has higher priority than C, its subregions appear in the flat map
|
|
even where they overlap with C. In ranges where B has not mapped anything
|
|
C's region appears.
|
|
|
|
If B had provided its own MMIO operations (ie it was not a pure container)
|
|
then these would be used for any addresses in its range not handled by
|
|
D or E, and the result would be:
|
|
[CCCCCCCCCCCC][DDDDD][BBBBB][EEEEE][BBBBB]
|
|
|
|
Priority values are local to a container, because the priorities of two
|
|
regions are only compared when they are both children of the same container.
|
|
This means that the device in charge of the container (typically modelling
|
|
a bus or a memory controller) can use them to manage the interaction of
|
|
its child regions without any side effects on other parts of the system.
|
|
In the example above, the priorities of D and E are unimportant because
|
|
they do not overlap each other. It is the relative priority of B and C
|
|
that causes D and E to appear on top of C: D and E's priorities are never
|
|
compared against the priority of C.
|
|
|
|
Visibility
|
|
----------
|
|
The memory core uses the following rules to select a memory region when the
|
|
guest accesses an address:
|
|
|
|
- all direct subregions of the root region are matched against the address, in
|
|
descending priority order
|
|
- if the address lies outside the region offset/size, the subregion is
|
|
discarded
|
|
- if the subregion is a leaf (RAM or MMIO), the search terminates, returning
|
|
this leaf region
|
|
- if the subregion is a container, the same algorithm is used within the
|
|
subregion (after the address is adjusted by the subregion offset)
|
|
- if the subregion is an alias, the search is continued at the alias target
|
|
(after the address is adjusted by the subregion offset and alias offset)
|
|
- if a recursive search within a container or alias subregion does not
|
|
find a match (because of a "hole" in the container's coverage of its
|
|
address range), then if this is a container with its own MMIO or RAM
|
|
backing the search terminates, returning the container itself. Otherwise
|
|
we continue with the next subregion in priority order
|
|
- if none of the subregions match the address then the search terminates
|
|
with no match found
|
|
|
|
Example memory map
|
|
------------------
|
|
|
|
system_memory: container@0-2^48-1
|
|
|
|
|
+---- lomem: alias@0-0xdfffffff ---> #ram (0-0xdfffffff)
|
|
|
|
|
+---- himem: alias@0x100000000-0x11fffffff ---> #ram (0xe0000000-0xffffffff)
|
|
|
|
|
+---- vga-window: alias@0xa0000-0xbfffff ---> #pci (0xa0000-0xbffff)
|
|
| (prio 1)
|
|
|
|
|
+---- pci-hole: alias@0xe0000000-0xffffffff ---> #pci (0xe0000000-0xffffffff)
|
|
|
|
pci (0-2^32-1)
|
|
|
|
|
+--- vga-area: container@0xa0000-0xbffff
|
|
| |
|
|
| +--- alias@0x00000-0x7fff ---> #vram (0x010000-0x017fff)
|
|
| |
|
|
| +--- alias@0x08000-0xffff ---> #vram (0x020000-0x027fff)
|
|
|
|
|
+---- vram: ram@0xe1000000-0xe1ffffff
|
|
|
|
|
+---- vga-mmio: mmio@0xe2000000-0xe200ffff
|
|
|
|
ram: ram@0x00000000-0xffffffff
|
|
|
|
This is a (simplified) PC memory map. The 4GB RAM block is mapped into the
|
|
system address space via two aliases: "lomem" is a 1:1 mapping of the first
|
|
3.5GB; "himem" maps the last 0.5GB at address 4GB. This leaves 0.5GB for the
|
|
so-called PCI hole, that allows a 32-bit PCI bus to exist in a system with
|
|
4GB of memory.
|
|
|
|
The memory controller diverts addresses in the range 640K-768K to the PCI
|
|
address space. This is modelled using the "vga-window" alias, mapped at a
|
|
higher priority so it obscures the RAM at the same addresses. The vga window
|
|
can be removed by programming the memory controller; this is modelled by
|
|
removing the alias and exposing the RAM underneath.
|
|
|
|
The pci address space is not a direct child of the system address space, since
|
|
we only want parts of it to be visible (we accomplish this using aliases).
|
|
It has two subregions: vga-area models the legacy vga window and is occupied
|
|
by two 32K memory banks pointing at two sections of the framebuffer.
|
|
In addition the vram is mapped as a BAR at address e1000000, and an additional
|
|
BAR containing MMIO registers is mapped after it.
|
|
|
|
Note that if the guest maps a BAR outside the PCI hole, it would not be
|
|
visible as the pci-hole alias clips it to a 0.5GB range.
|
|
|
|
Attributes
|
|
----------
|
|
|
|
Various region attributes (read-only, dirty logging, coalesced mmio, ioeventfd)
|
|
can be changed during the region lifecycle. They take effect once the region
|
|
is made visible (which can be immediately, later, or never).
|
|
|
|
MMIO Operations
|
|
---------------
|
|
|
|
MMIO regions are provided with ->read() and ->write() callbacks; in addition
|
|
various constraints can be supplied to control how these callbacks are called:
|
|
|
|
- .valid.min_access_size, .valid.max_access_size define the access sizes
|
|
(in bytes) which the device accepts; accesses outside this range will
|
|
have device and bus specific behaviour (ignored, or machine check)
|
|
- .valid.aligned specifies that the device only accepts naturally aligned
|
|
accesses. Unaligned accesses invoke device and bus specific behaviour.
|
|
- .impl.min_access_size, .impl.max_access_size define the access sizes
|
|
(in bytes) supported by the *implementation*; other access sizes will be
|
|
emulated using the ones available. For example a 4-byte write will be
|
|
emulated using four 1-byte writes, if .impl.max_access_size = 1.
|
|
- .impl.unaligned specifies that the *implementation* supports unaligned
|
|
accesses; if false, unaligned accesses will be emulated by two aligned
|
|
accesses.
|
|
- .old_mmio can be used to ease porting from code using
|
|
cpu_register_io_memory(). It should not be used in new code.
|