mirror of https://gitee.com/openkylin/qemu.git
328 lines
10 KiB
C
328 lines
10 KiB
C
/*
|
|
* ASPEED System Control Unit
|
|
*
|
|
* Andrew Jeffery <andrew@aj.id.au>
|
|
*
|
|
* Copyright 2016 IBM Corp.
|
|
*
|
|
* This code is licensed under the GPL version 2 or later. See
|
|
* the COPYING file in the top-level directory.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "hw/misc/aspeed_scu.h"
|
|
#include "hw/qdev-properties.h"
|
|
#include "qapi/error.h"
|
|
#include "qapi/visitor.h"
|
|
#include "qemu/bitops.h"
|
|
#include "qemu/log.h"
|
|
#include "trace.h"
|
|
|
|
#define TO_REG(offset) ((offset) >> 2)
|
|
|
|
#define PROT_KEY TO_REG(0x00)
|
|
#define SYS_RST_CTRL TO_REG(0x04)
|
|
#define CLK_SEL TO_REG(0x08)
|
|
#define CLK_STOP_CTRL TO_REG(0x0C)
|
|
#define FREQ_CNTR_CTRL TO_REG(0x10)
|
|
#define FREQ_CNTR_EVAL TO_REG(0x14)
|
|
#define IRQ_CTRL TO_REG(0x18)
|
|
#define D2PLL_PARAM TO_REG(0x1C)
|
|
#define MPLL_PARAM TO_REG(0x20)
|
|
#define HPLL_PARAM TO_REG(0x24)
|
|
#define FREQ_CNTR_RANGE TO_REG(0x28)
|
|
#define MISC_CTRL1 TO_REG(0x2C)
|
|
#define PCI_CTRL1 TO_REG(0x30)
|
|
#define PCI_CTRL2 TO_REG(0x34)
|
|
#define PCI_CTRL3 TO_REG(0x38)
|
|
#define SYS_RST_STATUS TO_REG(0x3C)
|
|
#define SOC_SCRATCH1 TO_REG(0x40)
|
|
#define SOC_SCRATCH2 TO_REG(0x44)
|
|
#define MAC_CLK_DELAY TO_REG(0x48)
|
|
#define MISC_CTRL2 TO_REG(0x4C)
|
|
#define VGA_SCRATCH1 TO_REG(0x50)
|
|
#define VGA_SCRATCH2 TO_REG(0x54)
|
|
#define VGA_SCRATCH3 TO_REG(0x58)
|
|
#define VGA_SCRATCH4 TO_REG(0x5C)
|
|
#define VGA_SCRATCH5 TO_REG(0x60)
|
|
#define VGA_SCRATCH6 TO_REG(0x64)
|
|
#define VGA_SCRATCH7 TO_REG(0x68)
|
|
#define VGA_SCRATCH8 TO_REG(0x6C)
|
|
#define HW_STRAP1 TO_REG(0x70)
|
|
#define RNG_CTRL TO_REG(0x74)
|
|
#define RNG_DATA TO_REG(0x78)
|
|
#define SILICON_REV TO_REG(0x7C)
|
|
#define PINMUX_CTRL1 TO_REG(0x80)
|
|
#define PINMUX_CTRL2 TO_REG(0x84)
|
|
#define PINMUX_CTRL3 TO_REG(0x88)
|
|
#define PINMUX_CTRL4 TO_REG(0x8C)
|
|
#define PINMUX_CTRL5 TO_REG(0x90)
|
|
#define PINMUX_CTRL6 TO_REG(0x94)
|
|
#define WDT_RST_CTRL TO_REG(0x9C)
|
|
#define PINMUX_CTRL7 TO_REG(0xA0)
|
|
#define PINMUX_CTRL8 TO_REG(0xA4)
|
|
#define PINMUX_CTRL9 TO_REG(0xA8)
|
|
#define WAKEUP_EN TO_REG(0xC0)
|
|
#define WAKEUP_CTRL TO_REG(0xC4)
|
|
#define HW_STRAP2 TO_REG(0xD0)
|
|
#define FREE_CNTR4 TO_REG(0xE0)
|
|
#define FREE_CNTR4_EXT TO_REG(0xE4)
|
|
#define CPU2_CTRL TO_REG(0x100)
|
|
#define CPU2_BASE_SEG1 TO_REG(0x104)
|
|
#define CPU2_BASE_SEG2 TO_REG(0x108)
|
|
#define CPU2_BASE_SEG3 TO_REG(0x10C)
|
|
#define CPU2_BASE_SEG4 TO_REG(0x110)
|
|
#define CPU2_BASE_SEG5 TO_REG(0x114)
|
|
#define CPU2_CACHE_CTRL TO_REG(0x118)
|
|
#define UART_HPLL_CLK TO_REG(0x160)
|
|
#define PCIE_CTRL TO_REG(0x180)
|
|
#define BMC_MMIO_CTRL TO_REG(0x184)
|
|
#define RELOC_DECODE_BASE1 TO_REG(0x188)
|
|
#define RELOC_DECODE_BASE2 TO_REG(0x18C)
|
|
#define MAILBOX_DECODE_BASE TO_REG(0x190)
|
|
#define SRAM_DECODE_BASE1 TO_REG(0x194)
|
|
#define SRAM_DECODE_BASE2 TO_REG(0x198)
|
|
#define BMC_REV TO_REG(0x19C)
|
|
#define BMC_DEV_ID TO_REG(0x1A4)
|
|
|
|
#define PROT_KEY_UNLOCK 0x1688A8A8
|
|
#define SCU_IO_REGION_SIZE 0x1000
|
|
|
|
static const uint32_t ast2400_a0_resets[ASPEED_SCU_NR_REGS] = {
|
|
[SYS_RST_CTRL] = 0xFFCFFEDCU,
|
|
[CLK_SEL] = 0xF3F40000U,
|
|
[CLK_STOP_CTRL] = 0x19FC3E8BU,
|
|
[D2PLL_PARAM] = 0x00026108U,
|
|
[MPLL_PARAM] = 0x00030291U,
|
|
[HPLL_PARAM] = 0x00000291U,
|
|
[MISC_CTRL1] = 0x00000010U,
|
|
[PCI_CTRL1] = 0x20001A03U,
|
|
[PCI_CTRL2] = 0x20001A03U,
|
|
[PCI_CTRL3] = 0x04000030U,
|
|
[SYS_RST_STATUS] = 0x00000001U,
|
|
[SOC_SCRATCH1] = 0x000000C0U, /* SoC completed DRAM init */
|
|
[MISC_CTRL2] = 0x00000023U,
|
|
[RNG_CTRL] = 0x0000000EU,
|
|
[PINMUX_CTRL2] = 0x0000F000U,
|
|
[PINMUX_CTRL3] = 0x01000000U,
|
|
[PINMUX_CTRL4] = 0x000000FFU,
|
|
[PINMUX_CTRL5] = 0x0000A000U,
|
|
[WDT_RST_CTRL] = 0x003FFFF3U,
|
|
[PINMUX_CTRL8] = 0xFFFF0000U,
|
|
[PINMUX_CTRL9] = 0x000FFFFFU,
|
|
[FREE_CNTR4] = 0x000000FFU,
|
|
[FREE_CNTR4_EXT] = 0x000000FFU,
|
|
[CPU2_BASE_SEG1] = 0x80000000U,
|
|
[CPU2_BASE_SEG4] = 0x1E600000U,
|
|
[CPU2_BASE_SEG5] = 0xC0000000U,
|
|
[UART_HPLL_CLK] = 0x00001903U,
|
|
[PCIE_CTRL] = 0x0000007BU,
|
|
[BMC_DEV_ID] = 0x00002402U
|
|
};
|
|
|
|
/* SCU70 bit 23: 0 24Mhz. bit 11:9: 0b001 AXI:ABH ratio 2:1 */
|
|
/* AST2500 revision A1 */
|
|
|
|
static const uint32_t ast2500_a1_resets[ASPEED_SCU_NR_REGS] = {
|
|
[SYS_RST_CTRL] = 0xFFCFFEDCU,
|
|
[CLK_SEL] = 0xF3F40000U,
|
|
[CLK_STOP_CTRL] = 0x19FC3E8BU,
|
|
[D2PLL_PARAM] = 0x00026108U,
|
|
[MPLL_PARAM] = 0x00030291U,
|
|
[HPLL_PARAM] = 0x93000400U,
|
|
[MISC_CTRL1] = 0x00000010U,
|
|
[PCI_CTRL1] = 0x20001A03U,
|
|
[PCI_CTRL2] = 0x20001A03U,
|
|
[PCI_CTRL3] = 0x04000030U,
|
|
[SYS_RST_STATUS] = 0x00000001U,
|
|
[SOC_SCRATCH1] = 0x000000C0U, /* SoC completed DRAM init */
|
|
[MISC_CTRL2] = 0x00000023U,
|
|
[RNG_CTRL] = 0x0000000EU,
|
|
[PINMUX_CTRL2] = 0x0000F000U,
|
|
[PINMUX_CTRL3] = 0x03000000U,
|
|
[PINMUX_CTRL4] = 0x00000000U,
|
|
[PINMUX_CTRL5] = 0x0000A000U,
|
|
[WDT_RST_CTRL] = 0x023FFFF3U,
|
|
[PINMUX_CTRL8] = 0xFFFF0000U,
|
|
[PINMUX_CTRL9] = 0x000FFFFFU,
|
|
[FREE_CNTR4] = 0x000000FFU,
|
|
[FREE_CNTR4_EXT] = 0x000000FFU,
|
|
[CPU2_BASE_SEG1] = 0x80000000U,
|
|
[CPU2_BASE_SEG4] = 0x1E600000U,
|
|
[CPU2_BASE_SEG5] = 0xC0000000U,
|
|
[UART_HPLL_CLK] = 0x00001903U,
|
|
[PCIE_CTRL] = 0x0000007BU,
|
|
[BMC_DEV_ID] = 0x00002402U
|
|
};
|
|
|
|
static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size)
|
|
{
|
|
AspeedSCUState *s = ASPEED_SCU(opaque);
|
|
int reg = TO_REG(offset);
|
|
|
|
if (reg >= ARRAY_SIZE(s->regs)) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
return 0;
|
|
}
|
|
|
|
switch (reg) {
|
|
case WAKEUP_EN:
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: Read of write-only offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
break;
|
|
}
|
|
|
|
return s->regs[reg];
|
|
}
|
|
|
|
static void aspeed_scu_write(void *opaque, hwaddr offset, uint64_t data,
|
|
unsigned size)
|
|
{
|
|
AspeedSCUState *s = ASPEED_SCU(opaque);
|
|
int reg = TO_REG(offset);
|
|
|
|
if (reg >= ARRAY_SIZE(s->regs)) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
return;
|
|
}
|
|
|
|
if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 &&
|
|
s->regs[PROT_KEY] != PROT_KEY_UNLOCK) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__);
|
|
return;
|
|
}
|
|
|
|
trace_aspeed_scu_write(offset, size, data);
|
|
|
|
switch (reg) {
|
|
case FREQ_CNTR_EVAL:
|
|
case VGA_SCRATCH1 ... VGA_SCRATCH8:
|
|
case RNG_DATA:
|
|
case SILICON_REV:
|
|
case FREE_CNTR4:
|
|
case FREE_CNTR4_EXT:
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: Write to read-only offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
return;
|
|
}
|
|
|
|
s->regs[reg] = data;
|
|
}
|
|
|
|
static const MemoryRegionOps aspeed_scu_ops = {
|
|
.read = aspeed_scu_read,
|
|
.write = aspeed_scu_write,
|
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
|
.valid.min_access_size = 4,
|
|
.valid.max_access_size = 4,
|
|
.valid.unaligned = false,
|
|
};
|
|
|
|
static void aspeed_scu_reset(DeviceState *dev)
|
|
{
|
|
AspeedSCUState *s = ASPEED_SCU(dev);
|
|
const uint32_t *reset;
|
|
|
|
switch (s->silicon_rev) {
|
|
case AST2400_A0_SILICON_REV:
|
|
case AST2400_A1_SILICON_REV:
|
|
reset = ast2400_a0_resets;
|
|
break;
|
|
case AST2500_A0_SILICON_REV:
|
|
case AST2500_A1_SILICON_REV:
|
|
reset = ast2500_a1_resets;
|
|
break;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
|
|
memcpy(s->regs, reset, sizeof(s->regs));
|
|
s->regs[SILICON_REV] = s->silicon_rev;
|
|
s->regs[HW_STRAP1] = s->hw_strap1;
|
|
s->regs[HW_STRAP2] = s->hw_strap2;
|
|
}
|
|
|
|
static uint32_t aspeed_silicon_revs[] = {
|
|
AST2400_A0_SILICON_REV,
|
|
AST2400_A1_SILICON_REV,
|
|
AST2500_A0_SILICON_REV,
|
|
AST2500_A1_SILICON_REV,
|
|
};
|
|
|
|
bool is_supported_silicon_rev(uint32_t silicon_rev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(aspeed_silicon_revs); i++) {
|
|
if (silicon_rev == aspeed_silicon_revs[i]) {
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static void aspeed_scu_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
|
|
AspeedSCUState *s = ASPEED_SCU(dev);
|
|
|
|
if (!is_supported_silicon_rev(s->silicon_rev)) {
|
|
error_setg(errp, "Unknown silicon revision: 0x%" PRIx32,
|
|
s->silicon_rev);
|
|
return;
|
|
}
|
|
|
|
memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_scu_ops, s,
|
|
TYPE_ASPEED_SCU, SCU_IO_REGION_SIZE);
|
|
|
|
sysbus_init_mmio(sbd, &s->iomem);
|
|
}
|
|
|
|
static const VMStateDescription vmstate_aspeed_scu = {
|
|
.name = "aspeed.scu",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT32_ARRAY(regs, AspeedSCUState, ASPEED_SCU_NR_REGS),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static Property aspeed_scu_properties[] = {
|
|
DEFINE_PROP_UINT32("silicon-rev", AspeedSCUState, silicon_rev, 0),
|
|
DEFINE_PROP_UINT32("hw-strap1", AspeedSCUState, hw_strap1, 0),
|
|
DEFINE_PROP_UINT32("hw-strap2", AspeedSCUState, hw_strap2, 0),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void aspeed_scu_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
dc->realize = aspeed_scu_realize;
|
|
dc->reset = aspeed_scu_reset;
|
|
dc->desc = "ASPEED System Control Unit";
|
|
dc->vmsd = &vmstate_aspeed_scu;
|
|
dc->props = aspeed_scu_properties;
|
|
}
|
|
|
|
static const TypeInfo aspeed_scu_info = {
|
|
.name = TYPE_ASPEED_SCU,
|
|
.parent = TYPE_SYS_BUS_DEVICE,
|
|
.instance_size = sizeof(AspeedSCUState),
|
|
.class_init = aspeed_scu_class_init,
|
|
};
|
|
|
|
static void aspeed_scu_register_types(void)
|
|
{
|
|
type_register_static(&aspeed_scu_info);
|
|
}
|
|
|
|
type_init(aspeed_scu_register_types);
|