mirror of https://gitee.com/openkylin/qemu.git
134 lines
7.1 KiB
Plaintext
134 lines
7.1 KiB
Plaintext
*****************************
|
|
***** s390 hardware IPL *****
|
|
*****************************
|
|
|
|
The s390 hardware IPL process consists of the following steps.
|
|
|
|
1. A READ IPL ccw is constructed in memory location 0x0.
|
|
This ccw, by definition, reads the IPL1 record which is located on the disk
|
|
at cylinder 0 track 0 record 1. Note that the chain flag is on in this ccw
|
|
so when it is complete another ccw will be fetched and executed from memory
|
|
location 0x08.
|
|
|
|
2. Execute the Read IPL ccw at 0x00, thereby reading IPL1 data into 0x00.
|
|
IPL1 data is 24 bytes in length and consists of the following pieces of
|
|
information: [psw][read ccw][tic ccw]. When the machine executes the Read
|
|
IPL ccw it read the 24-bytes of IPL1 to be read into memory starting at
|
|
location 0x0. Then the ccw program at 0x08 which consists of a read
|
|
ccw and a tic ccw is automatically executed because of the chain flag from
|
|
the original READ IPL ccw. The read ccw will read the IPL2 data into memory
|
|
and the TIC (Transfer In Channel) will transfer control to the channel
|
|
program contained in the IPL2 data. The TIC channel command is the
|
|
equivalent of a branch/jump/goto instruction for channel programs.
|
|
NOTE: The ccws in IPL1 are defined by the architecture to be format 0.
|
|
|
|
3. Execute IPL2.
|
|
The TIC ccw instruction at the end of the IPL1 channel program will begin
|
|
the execution of the IPL2 channel program. IPL2 is stage-2 of the boot
|
|
process and will contain a larger channel program than IPL1. The point of
|
|
IPL2 is to find and load either the operating system or a small program that
|
|
loads the operating system from disk. At the end of this step all or some of
|
|
the real operating system is loaded into memory and we are ready to hand
|
|
control over to the guest operating system. At this point the guest
|
|
operating system is entirely responsible for loading any more data it might
|
|
need to function. NOTE: The IPL2 channel program might read data into memory
|
|
location 0 thereby overwriting the IPL1 psw and channel program. This is ok
|
|
as long as the data placed in location 0 contains a psw whose instruction
|
|
address points to the guest operating system code to execute at the end of
|
|
the IPL/boot process.
|
|
NOTE: The ccws in IPL2 are defined by the architecture to be format 0.
|
|
|
|
4. Start executing the guest operating system.
|
|
The psw that was loaded into memory location 0 as part of the ipl process
|
|
should contain the needed flags for the operating system we have loaded. The
|
|
psw's instruction address will point to the location in memory where we want
|
|
to start executing the operating system. This psw is loaded (via LPSW
|
|
instruction) causing control to be passed to the operating system code.
|
|
|
|
In a non-virtualized environment this process, handled entirely by the hardware,
|
|
is kicked off by the user initiating a "Load" procedure from the hardware
|
|
management console. This "Load" procedure crafts a special "Read IPL" ccw in
|
|
memory location 0x0 that reads IPL1. It then executes this ccw thereby kicking
|
|
off the reading of IPL1 data. Since the channel program from IPL1 will be
|
|
written immediately after the special "Read IPL" ccw, the IPL1 channel program
|
|
will be executed immediately (the special read ccw has the chaining bit turned
|
|
on). The TIC at the end of the IPL1 channel program will cause the IPL2 channel
|
|
program to be executed automatically. After this sequence completes the "Load"
|
|
procedure then loads the psw from 0x0.
|
|
|
|
**********************************************************
|
|
***** How this all pertains to QEMU (and the kernel) *****
|
|
**********************************************************
|
|
|
|
In theory we should merely have to do the following to IPL/boot a guest
|
|
operating system from a DASD device:
|
|
|
|
1. Place a "Read IPL" ccw into memory location 0x0 with chaining bit on.
|
|
2. Execute channel program at 0x0.
|
|
3. LPSW 0x0.
|
|
|
|
However, our emulation of the machine's channel program logic within the kernel
|
|
is missing one key feature that is required for this process to work:
|
|
non-prefetch of ccw data.
|
|
|
|
When we start a channel program we pass the channel subsystem parameters via an
|
|
ORB (Operation Request Block). One of those parameters is a prefetch bit. If the
|
|
bit is on then the vfio-ccw kernel driver is allowed to read the entire channel
|
|
program from guest memory before it starts executing it. This means that any
|
|
channel commands that read additional channel commands will not work as expected
|
|
because the newly read commands will only exist in guest memory and NOT within
|
|
the kernel's channel subsystem memory. The kernel vfio-ccw driver currently
|
|
requires this bit to be on for all channel programs. This is a problem because
|
|
the IPL process consists of transferring control from the "Read IPL" ccw
|
|
immediately to the IPL1 channel program that was read by "Read IPL".
|
|
|
|
Not being able to turn off prefetch will also prevent the TIC at the end of the
|
|
IPL1 channel program from transferring control to the IPL2 channel program.
|
|
|
|
Lastly, in some cases (the zipl bootloader for example) the IPL2 program also
|
|
transfers control to another channel program segment immediately after reading
|
|
it from the disk. So we need to be able to handle this case.
|
|
|
|
**************************
|
|
***** What QEMU does *****
|
|
**************************
|
|
|
|
Since we are forced to live with prefetch we cannot use the very simple IPL
|
|
procedure we defined in the preceding section. So we compensate by doing the
|
|
following.
|
|
|
|
1. Place "Read IPL" ccw into memory location 0x0, but turn off chaining bit.
|
|
2. Execute "Read IPL" at 0x0.
|
|
|
|
So now IPL1's psw is at 0x0 and IPL1's channel program is at 0x08.
|
|
|
|
4. Write a custom channel program that will seek to the IPL2 record and then
|
|
execute the READ and TIC ccws from IPL1. Normally the seek is not required
|
|
because after reading the IPL1 record the disk is automatically positioned
|
|
to read the very next record which will be IPL2. But since we are not reading
|
|
both IPL1 and IPL2 as part of the same channel program we must manually set
|
|
the position.
|
|
|
|
5. Grab the target address of the TIC instruction from the IPL1 channel program.
|
|
This address is where the IPL2 channel program starts.
|
|
|
|
Now IPL2 is loaded into memory somewhere, and we know the address.
|
|
|
|
6. Execute the IPL2 channel program at the address obtained in step #5.
|
|
|
|
Because this channel program can be dynamic, we must use a special algorithm
|
|
that detects a READ immediately followed by a TIC and breaks the ccw chain
|
|
by turning off the chain bit in the READ ccw. When control is returned from
|
|
the kernel/hardware to the QEMU bios code we immediately issue another start
|
|
subchannel to execute the remaining TIC instruction. This causes the entire
|
|
channel program (starting from the TIC) and all needed data to be refetched
|
|
thereby stepping around the limitation that would otherwise prevent this
|
|
channel program from executing properly.
|
|
|
|
Now the operating system code is loaded somewhere in guest memory and the psw
|
|
in memory location 0x0 will point to entry code for the guest operating
|
|
system.
|
|
|
|
7. LPSW 0x0.
|
|
LPSW transfers control to the guest operating system and we're done.
|