mirror of https://gitee.com/openkylin/qemu.git
97 lines
4.3 KiB
Plaintext
97 lines
4.3 KiB
Plaintext
|
|
Device Specification for Inter-VM shared memory device
|
|
------------------------------------------------------
|
|
|
|
The Inter-VM shared memory device is designed to share a region of memory to
|
|
userspace in multiple virtual guests. The memory region does not belong to any
|
|
guest, but is a POSIX memory object on the host. Optionally, the device may
|
|
support sending interrupts to other guests sharing the same memory region.
|
|
|
|
|
|
The Inter-VM PCI device
|
|
-----------------------
|
|
|
|
*BARs*
|
|
|
|
The device supports three BARs. BAR0 is a 1 Kbyte MMIO region to support
|
|
registers. BAR1 is used for MSI-X when it is enabled in the device. BAR2 is
|
|
used to map the shared memory object from the host. The size of BAR2 is
|
|
specified when the guest is started and must be a power of 2 in size.
|
|
|
|
*Registers*
|
|
|
|
The device currently supports 4 registers of 32-bits each. Registers
|
|
are used for synchronization between guests sharing the same memory object when
|
|
interrupts are supported (this requires using the shared memory server).
|
|
|
|
The server assigns each VM an ID number and sends this ID number to the Qemu
|
|
process when the guest starts.
|
|
|
|
enum ivshmem_registers {
|
|
IntrMask = 0,
|
|
IntrStatus = 4,
|
|
IVPosition = 8,
|
|
Doorbell = 12
|
|
};
|
|
|
|
The first two registers are the interrupt mask and status registers. Mask and
|
|
status are only used with pin-based interrupts. They are unused with MSI
|
|
interrupts.
|
|
|
|
Status Register: The status register is set to 1 when an interrupt occurs.
|
|
|
|
Mask Register: The mask register is bitwise ANDed with the interrupt status
|
|
and the result will raise an interrupt if it is non-zero. However, since 1 is
|
|
the only value the status will be set to, it is only the first bit of the mask
|
|
that has any effect. Therefore interrupts can be masked by setting the first
|
|
bit to 0 and unmasked by setting the first bit to 1.
|
|
|
|
IVPosition Register: The IVPosition register is read-only and reports the
|
|
guest's ID number. The guest IDs are non-negative integers. When using the
|
|
server, since the server is a separate process, the VM ID will only be set when
|
|
the device is ready (shared memory is received from the server and accessible via
|
|
the device). If the device is not ready, the IVPosition will return -1.
|
|
Applications should ensure that they have a valid VM ID before accessing the
|
|
shared memory.
|
|
|
|
Doorbell Register: To interrupt another guest, a guest must write to the
|
|
Doorbell register. The doorbell register is 32-bits, logically divided into
|
|
two 16-bit fields. The high 16-bits are the guest ID to interrupt and the low
|
|
16-bits are the interrupt vector to trigger. The semantics of the value
|
|
written to the doorbell depends on whether the device is using MSI or a regular
|
|
pin-based interrupt. In short, MSI uses vectors while regular interrupts set the
|
|
status register.
|
|
|
|
Regular Interrupts
|
|
|
|
If regular interrupts are used (due to either a guest not supporting MSI or the
|
|
user specifying not to use them on startup) then the value written to the lower
|
|
16-bits of the Doorbell register results is arbitrary and will trigger an
|
|
interrupt in the destination guest.
|
|
|
|
Message Signalled Interrupts
|
|
|
|
A ivshmem device may support multiple MSI vectors. If so, the lower 16-bits
|
|
written to the Doorbell register must be between 0 and the maximum number of
|
|
vectors the guest supports. The lower 16 bits written to the doorbell is the
|
|
MSI vector that will be raised in the destination guest. The number of MSI
|
|
vectors is configurable but it is set when the VM is started.
|
|
|
|
The important thing to remember with MSI is that it is only a signal, no status
|
|
is set (since MSI interrupts are not shared). All information other than the
|
|
interrupt itself should be communicated via the shared memory region. Devices
|
|
supporting multiple MSI vectors can use different vectors to indicate different
|
|
events have occurred. The semantics of interrupt vectors are left to the
|
|
user's discretion.
|
|
|
|
|
|
Usage in the Guest
|
|
------------------
|
|
|
|
The shared memory device is intended to be used with the provided UIO driver.
|
|
Very little configuration is needed. The guest should map BAR0 to access the
|
|
registers (an array of 32-bit ints allows simple writing) and map BAR2 to
|
|
access the shared memory region itself. The size of the shared memory region
|
|
is specified when the guest (or shared memory server) is started. A guest may
|
|
map the whole shared memory region or only part of it.
|