..
Makefile.objs
arm: Add xlnx-ep108 machine
2015-05-18 16:41:13 +01:00
allwinner-a10.c
hw: Mark device misusing nd_table[] FIXME
2015-04-02 15:30:32 +02:00
armv7m.c
target_arm: Parameterise the irq lines for armv7m_init
2015-02-05 13:37:21 +00:00
boot.c
Switch non-CPU callers from ld/st*_phys to address_space_ld/st*
2015-04-26 16:49:24 +01:00
collie.c
hw: Convert from BlockDriverState to BlockBackend, mostly
2014-10-20 14:02:25 +02:00
cubieboard.c
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
2015-04-08 17:30:36 +01:00
digic.c
hw/arm/digic: add UART support
2013-12-17 20:12:51 +00:00
digic_boards.c
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
2015-04-08 17:30:36 +01:00
exynos4_boards.c
machine: Conversion of QEMUMachineInitArgs to MachineState
2014-05-28 17:35:01 +02:00
exynos4210.c
error: Use error_report_err() where appropriate
2015-02-18 10:51:09 +01:00
gumstix.c
hw: Convert from BlockDriverState to BlockBackend, mostly
2014-10-20 14:02:25 +02:00
highbank.c
hw/arm/highbank.c: Wire FIQ between CPU <> GIC
2015-05-12 11:57:19 +01:00
integratorcp.c
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
2015-04-08 17:30:36 +01:00
kzm.c
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
2015-04-08 17:30:36 +01:00
mainstone.c
hw: Convert from BlockDriverState to BlockBackend, mostly
2014-10-20 14:02:25 +02:00
musicpal.c
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
2015-04-08 17:30:36 +01:00
netduino2.c
netduino2: Add the Netduino 2 Machine
2015-03-11 13:21:06 +00:00
nseries.c
hw/arm/nseries: convert ffs(3) to ctz32()
2015-04-28 15:36:08 +02:00
omap1.c
Convert ffs() != 0 callers to ctz32()
2015-04-28 15:36:08 +02:00
omap2.c
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
2015-04-08 17:30:36 +01:00
omap_sx1.c
hw: Convert from BlockDriverState to BlockBackend, mostly
2014-10-20 14:02:25 +02:00
palm.c
memory: add parameter errp to memory_region_init_ram
2014-09-09 13:41:43 +02:00
pxa2xx.c
target-arm: rename c1_coproc to cpacr_el1
2015-04-26 16:49:25 +01:00
pxa2xx_gpio.c
Convert (ffs(val) - 1) to ctz32(val)
2015-04-28 15:36:08 +02:00
pxa2xx_pic.c
savevm: Remove all the unneeded version_minimum_id_old (arm)
2014-05-13 16:09:35 +01:00
realview.c
error: Use error_report_err() where appropriate
2015-02-18 10:51:09 +01:00
spitz.c
sysbus: Make devices picking up backends unavailable with -device
2015-04-02 15:30:44 +02:00
stellaris.c
target_arm: Parameterise the irq lines for armv7m_init
2015-02-05 13:37:21 +00:00
stm32f205_soc.c
stm32f205: Add the stm32f205 SoC
2015-03-11 13:21:06 +00:00
strongarm.c
Convert (ffs(val) - 1) to ctz32(val)
2015-04-28 15:36:08 +02:00
strongarm.h
hw: move private headers to hw/ subdirectories.
2013-04-08 18:13:16 +02:00
tosa.c
hw: Convert from BlockDriverState to BlockBackend, mostly
2014-10-20 14:02:25 +02:00
versatilepb.c
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
2015-04-08 17:30:36 +01:00
vexpress.c
hw/arm/vexpress.c: Wire FIQ between CPU <> GIC
2015-05-12 11:57:18 +01:00
virt.c
hw/arm/virt.c: Wire FIQ between CPU <> GIC
2015-05-12 11:57:18 +01:00
xilinx_zynq.c
arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
2015-04-08 17:30:36 +01:00
xlnx-ep108.c
arm: xlnx-ep108: Add bootloading
2015-05-18 16:41:14 +01:00
xlnx-zynqmp.c
arm: xlnx-zynqmp: Add UART support
2015-05-18 16:41:13 +01:00
z2.c
hw: Convert from BlockDriverState to BlockBackend, mostly
2014-10-20 14:02:25 +02:00