132669 【备份还原】用户手册中，图片编号格式不一致，存在图1-a、图2、图3-1、多种形式

data/kybackup/en_US/index.md

@@ -11,7 +11,7 @@ There are two modes: General, Grub backup and restore.
 ## General
 ### System Backup
 
-![Fig 1-a system backup -big](image/1-a.png)
+![Fig 1 system backup -big](image/1.png)
 
 
 - **New System Backup** -- The data that not in /backup、/media、/run、/proc、/dev、/sys、/cdrom、/mnt, etc , can be backup.
@@ -20,62 +20,62 @@ Click "Start Backup" Button will  enter the page select backup location, you can
 
 ![Fig 2 system backup device choose -big](image/2.png)
 
-Click "Next" button to enter the environment checking page. Inspection, such as backup space is enough, etc . And show check results. See 3-1,3-2.
+Click "Next" button to enter the environment checking page. Inspection, such as backup space is enough, etc . And show check results. See 3,4.
  
-![Fig 3-1 Checking -big](image/3-1.png)
+![Fig 3 Checking -big](image/3.png)
 
-![Fig 3-2 Check Result -big](image/3-2.png)
+![Fig 4 Check Result -big](image/4.png)
 
-Click "Next" button to enter the backup preparing page. You can define the backup name in it. As shown in figure 4.
+Click "Next" button to enter the backup preparing page. You can define the backup name in it. As shown in figure 5.
 
-![Fig 4 Preparing -big](image/4.png)
+![Fig 5 Preparing -big](image/5.png)
 
-Then click "Next" button to backup. As shown in figure 5.
+Then click "Next" button to backup. As shown in figure 6.
 
-![Fig 5 Backuping -big](image/5.png)
+![Fig 6 Backuping -big](image/6.png)
 
 The backup process can click "cancel" button, cancel the backup operation. 
-Backup is completed, enter the backup finish page, show result. As shown in figure 5-1.
+Backup is completed, enter the backup finish page, show result. As shown in figure 7.
 
-![Fig 5-1 Backup Finish -big](image/5-1.png)
+![Fig 7 Backup Finish -big](image/7.png)
 
-Click the "Home Page" button, click "Backup Management >>" tab, pop-up window of system backup management, you can see the backup just in it. As shown in figure 5-2.
+Click the "Home Page" button, click "Backup Management >>" tab, pop-up window of system backup management, you can see the backup just in it. As shown in figure 8.
 
-![Fig 5-2 Backup Management -big](image/5-2.png)
+![Fig 8 Backup Management -big](image/8.png)
 
 In the backup management page, select a backup, click the "Delete" button, remove the corresponding backup point.
 
 ### System Restore
 System restore can restore the system to its previous backup state.
 
-![Fig 6-a system restore -big](image/6-a.png)
+![Fig 9 system restore -big](image/9.png)
 
-Click "Start Restore" button, the system backups list window will pop up. As shown in figure 6-b.
+Click "Start Restore" button, the system backups list window will pop up. As shown in figure 10.
 
-![Fig 6-b select backup -big](image/6-b.png)
+![Fig 10 select backup -big](image/10.png)
 
-Select the corresponding backup point, click the "Ok" button, enter the system restore environmental checking page. As shown in figure 6-c.
+Select the corresponding backup point, click the "Ok" button, enter the system restore environmental checking page. As shown in figure 11.
 
-![Fig 6-c checking -big](image/6-c.png)
+![Fig 11 checking -big](image/11.png)
 
-Checking success, then click the "Next" button to enter the page of restore, to start the system restore. As shown in figure 6-d.
+Checking success, then click the "Next" button to enter the page of restore, to start the system restore. As shown in figure 12.
 
-![Fig 6-d select backup -big](image/6-d.png)
+![Fig 12 select backup -big](image/12.png)
 
 ### Data Backup and Data Recovery
 - **Data Backup** -- Backup the directories or files specified by user, and the function is similar to system backup.
 
-![Fig 7 Data backup-big](image/7.png)
+![Fig 13 Data backup-big](image/13.png)
 
 Note:``、$()、;、&、| etc. The symbols that can contain and execute system commands or used for continuous execution of system commands are added to the blacklist, and the name of the directory to be backed up is judged before backup. If the symbols in the blacklist are included, backup is not allowed.
 
-Click "Start Backup" and enter the backup path selection page. As shown in figure 8.
+Click "Start Backup" and enter the backup path selection page. As shown in figure 14.
 
-![Fig 8 Specify directories or files -big](image/8.png)
+![Fig 14 Specify directories or files -big](image/14.png)
 
-Or click "Update Backup" button, pop up data backup list window. As shown in figure 9.
+Or click "Update Backup" button, pop up data backup list window. As shown in figure 15.
 
-![Fig 9 data backup list -big](image/9.png)
+![Fig 15 data backup list -big](image/15.png)
 
 Then, click "Next" button, enter backup checking page --> backup preparing --> backuping --> backup finished. Such as system backup.
 
@@ -84,38 +84,38 @@ Then, click "Next" button, enter backup checking page --> backup preparing --> b
 
 - **Data Recovery** -- Recovery the data to its previous backup state, and the function is similar to system restore.
 
-![Fig 10 Data recovery-big](image/10.png)
+![Fig 16 Data recovery-big](image/16.png)
 
 ### Log Records
-Record all operations on backup and recovery tool, and the interface as shown in Fig 11. 
+Record all operations on backup and recovery tool, and the interface as shown in Fig 17. 
 
-![Fig 11 Log records-big](image/11.png)
+![Fig 17 Log records-big](image/17.png)
 
 ### Ghost Image
 Install from ghost image means generate an image file from an installed system, and then use this image file to copy the same state system to other computers. To use this function, a lacol system backup is needed first.
 
 #### Create Ghost Image
-The interface as shown in Fig 12.
+The interface as shown in Fig 18.
 
-![Fig 12 Ghost image-big](image/12.png)
+![Fig 18 Ghost image-big](image/18.png)
 
-Click "Start Ghost" and there will pop up a window to show all local system backups. Users select one of them and click "Ok" button, into the image storage location selection interface, can choose a local or mobile device, as shown in Fig 13-1.
+Click "Start Ghost" and there will pop up a window to show all local system backups. Users select one of them and click "Ok" button, into the image storage location selection interface, can choose a local or mobile device, as shown in Fig 19.
 
 (Tips: The architecture in name depends on hardware platform.)
 
-![Fig 13-1 Ghost image position -big](image/13-1.png)
+![Fig 19 Ghost image position -big](image/19.png)
 
-Then click "Next" button, enter checking page. As shown in figure 13-2.
+Then click "Next" button, enter checking page. As shown in figure 20.
 
-![Fig 13-2 Ghost image checking -big](image/13-2.png)
+![Fig 20 Ghost image checking -big](image/20.png)
 
-If success, then click "Next" button, enter makeing page. As shown in figure 13-3.
+If success, then click "Next" button, enter makeing page. As shown in figure 21.
 
-![Fig 13-3 Ghost image makeing -big](image/13-3.png)
+![Fig 21 Ghost image makeing -big](image/21png)
 
-Image filename is "computer name + architecture + backup name.kyimg", and the backup name removed some symbol. As shown in figure 13-4.
+Image filename is "computer name + architecture + backup name.kyimg", and the backup name removed some symbol. As shown in figure 22.
 
-![Fig 13-3 Ghost image finished -big](image/13-3.png)
+![Fig 22 Ghost image finished -big](image/22.png)
 
 #### Install from Ghost Image
 1) Copy the ghost image (saved in /ghost) to U-disk or other removable storage device.

data/kybackup/zh_CN/index.md

@@ -9,7 +9,7 @@
 ## 常规模式
 ### 系统备份
 
-![图 1-a 系统备份-big](image/1-a.png)
+![图 1 系统备份-big](image/1.png)
 
 
 - **系统备份** —— 将除/backup、/media、/run、/proc、/dev、/sys、/cdrom、/mnt等目录外的整个文件系统中的数据(包含用户数据)进行备份。
@@ -18,63 +18,63 @@
 
 ![图 2 系统备份位置选择 -big](image/2.png)
 
-单击“下一步”按钮，进入环境检测界面。检测诸如备份空间是否充足等，检测完成会展示检测结果。见3-1、3-2两图。
+单击“下一步”按钮，进入环境检测界面。检测诸如备份空间是否充足等，检测完成会展示检测结果。见3、4两图。
  
-![图 3-1 环境检测-big](image/3-1.png)
+![图 3 环境检测-big](image/3.png)
-![图 3-2 检测通过-big](image/3-2.png)
+![图 4检测通过-big](image/4.png)
 
-单击“下一步”按钮，进入备份准备界面。在此界面可以定义备份点名称，并对备份名称进行唯一性校验。如图4所示。
+单击“下一步”按钮，进入备份准备界面。在此界面可以定义备份点名称，并对备份名称进行唯一性校验。如图5所示。
 
-![图 4 备份准备 -big](image/4.png)
+![图 5 备份准备 -big](image/5.png)
 
-定义好备份名称后，单击“下一步”按钮，进入备份中界面，正式进行备份。如图5所示。
+定义好备份名称后，单击“下一步”按钮，进入备份中界面，正式进行备份。如图6所示。
 
-![图 5 系统备份中-big](image/5.png)
+![图 6 系统备份中-big](image/6.png)
 
 备份过程中可以单击“取消”按钮，取消备份操作。
-备份完成后，进入备份完成界面，展示备份结果。如图5-1所示。
+备份完成后，进入备份完成界面，展示备份结果。如图7所示。
 
-![图 5-1 系统备份完成-big](image/5-1.png)
+![图 7 系统备份完成-big](image/7.png)
 
-单击“返回首页”按钮，单击首页的右下角的“备份管理”标签，弹出系统备份管理窗口，可以看到刚刚的系统备份。如图5-2所示。
+单击“返回首页”按钮，单击首页的右下角的“备份管理”标签，弹出系统备份管理窗口，可以看到刚刚的系统备份。如图8所示。
 
-![图 5-2 系统备份管理-big](image/5-2.png)
+![图 8 系统备份管理-big](image/8.png)
 
 可以在备份管理页面，选择某个备份点，单击“删除”按钮，删除相应的备份点。
 
 ### 系统还原
 “系统还原” 可将系统还原到以前一个备份时的状态。注意：系统还原时同样会将用户数据进行还原，为防止用户数据丢失，可以先用数据备份将重要的用户数据进行备份；若需要保留完整的用户数据，也可以选择系统还原首页中的“保留用户数据”复选框后再还原。
 
-![图 6-a 系统还原-big](image/6-a.png)
+![图 9 系统还原-big](image/9.png)
 
-单击“开始还原”按钮，会弹出系统备份列表窗口，如图6-b所示。
+单击“开始还原”按钮，会弹出系统备份列表窗口，如图10所示。
 
-![图 6-b 选择还原点-big](image/6-b.png)
+![图 10 选择还原点-big](image/10.png)
 
-选择相应的备份点，单击“确定”按钮，进入系统还原的环境检测界面。如图6-c所示。
+选择相应的备份点，单击“确定”按钮，进入系统还原的环境检测界面。如图11所示。
 
-![图 6-c 系统还原环境检测-big](image/6-c.png)
+![图 11 系统还原环境检测-big](image/11.png)
 
-检测成功后，单击“下一步”按钮，进入还原页面，开始进行系统还原。如图6-d所示。
+检测成功后，单击“下一步”按钮，进入还原页面，开始进行系统还原。如图12所示。
 
-![图 6-d 系统还原中-big](image/6-d.png)
+![图 12 系统还原中-big](image/12.png)
 
 还原成功后，系统自动重启。
 
 ### 数据备份与数据还原
-- **数据备份** —— 对用户指定的目录或文件进行备份（限定为家目录/home/xxx、/root、/data或/data/usershare目录下的数据），操作与系统备份相似。可以新建备份，也可以对现有备份进行更新。如图7所示。
+- **数据备份** —— 对用户指定的目录或文件进行备份（限定为家目录/home/xxx、/root、/data或/data/usershare目录下的数据），操作与系统备份相似。可以新建备份，也可以对现有备份进行更新。如图13所示。
 
-![图 7 数据备份主界面-big](image/7.png)
+![图 13 数据备份主界面-big](image/13.png)
 
 注：``、$()、;、&、|等可以包含并执行系统命令或用于连续执行系统命令的符号加入黑名单，在备份前对要备份的目录名称进行判断，若包含有黑名单中的符号，则不允许进行备份。
 
-单击“开始备份”按钮，进入备份路径选择页面。如图8所示。
+单击“开始备份”按钮，进入备份路径选择页面。如图14所示。
 
-![图 8 数据备份路径选择-big](image/8.png)
+![图 14 数据备份路径选择-big](image/14.png)
 
-或单击“备份更新”按钮，弹出数据备份列表窗口，选择已经存在的某个备份点进行更新。如图9所示。
+或单击“备份更新”按钮，弹出数据备份列表窗口，选择已经存在的某个备份点进行更新。如图15所示。
 
-![图 9 更新数据备份 -big](image/9.png)
+![图 15 更新数据备份 -big](image/15.png)
 
 选择好备份路径后，单击“下一步”按钮，进入环境检测-->备份准备-->备份中-->备份完成等环节，和系统备份类似。
 数据备份首页右下角的“备份管理”，可用来查看数据备份状态，删除无效备份。
@@ -83,36 +83,36 @@
 
 - **数据还原** —— 还原到某个数据备份的状态，功能与系统还原相似。
 
-![图 10 数据还原主界面-big](image/10.png)
+![图 16 数据还原主界面-big](image/16.png)
 
 ### 操作日志
-记录了在备份还原上的所有备份、还原、删除操作，主界面如图11所示。
+记录了在备份还原上的所有备份、还原、删除操作，主界面如图17所示。
 
-![图 11 操作日志主界面-big](image/11.png)
+![图 17 操作日志主界面-big](image/17.png)
 
 ### Ghost镜像
 Ghost镜像安装，是指将一台机器上的系统生成一个镜像文件，然后使用该镜像文件来安装操作系统。要使用该功能，首先需要有一个本地系统备份。
 
 #### 创建Ghost镜像
-选择菜单“Ghost镜像”，如图12所示。
+选择菜单“Ghost镜像”，如图18所示。
 
-![图 12 Ghost镜像主界面-big](image/12.png)
+![图 18 Ghost镜像主界面-big](image/18.png)
 
-单击“创建镜像”按钮后，会弹出当前所有本地系统备份的列表；用户选择一个备份点，点击“确定”后，进入镜像存储位置选择界面，可以选择本地或移动设备，如图13-1所示。
+单击“创建镜像”按钮后，会弹出当前所有本地系统备份的列表；用户选择一个备份点，点击“确定”后，进入镜像存储位置选择界面，可以选择本地或移动设备，如图19所示。
 
-![图 13-1 Ghost镜像存储位置-big](image/13-1.png)
+![图 19 Ghost镜像存储位置-big](image/19.png)
 
-单击“下一步”按钮，进入环境检测页面，如图13-2所示。
+单击“下一步”按钮，进入环境检测页面，如图20所示。
 
-![图 13-2 制作镜像环境检测-big](image/13-2.png)
+![图 20 制作镜像环境检测-big](image/20.png)
 
-检测成功后，单击“下一步”按钮，进入制作中界面，开始制作Ghost镜像。如图13-3所示。
+检测成功后，单击“下一步”按钮，进入制作中界面，开始制作Ghost镜像。如图21所示。
 
-![图 13-3 镜像制作中-big](image/13-3.png)
+![图 21 镜像制作中-big](image/21.png)
 
-镜像文件名的格式为“主机名+体系架构+备份名称.kyimg”；其中，备份名称中去掉了某些符号。制作完成后，进入完成界面。如图13-4所示。
+镜像文件名的格式为“主机名+体系架构+备份名称.kyimg”；其中，备份名称中去掉了某些符号。制作完成后，进入完成界面。如图22所示。
  
-![图 13-4 Ghost镜像制作完成-big](image/13-4.png)
+![图 22 Ghost镜像制作完成-big](image/22.png)
 
 #### 安装Ghost镜像
 1）把制作好的Ghost镜像（存在于“/ghost”目录下）拷贝到U盘等可移动存储设备。