#!/bin/bash
#Author Buquan Liu, liubuquan@kylinos.cn, walt_lbq@163.com
#本程序本质上是对backup-auto/autobackup.cpp的重写.
#因为采用Qt程序则打包进入内核，相应的库会导致内核超过16M，故改为shell程序.

#backup-auto --autobackup ${rootpath} /backup
#backup-auto --autorestore ${rootpath} /backup

#xgs备份还原要保留更多的文件或目录: 
#kybackup/maindialog.cpp, backup-daemon/mountpoint.cpp, backup-daemon/data/backup-auto-efi
XGS=false

INFO="/etc/.bootinfo"
METAINFO=".METAINFO"
KB=1024
MB=1048576
GB=1073741824

if [ $# -lt 3 ] ; then
	exit
fi

#是否有/data数据分区
hasDataPartition=0
backupORrestore=$1
rootpath=$2
m_mountPath=$3

BACKUP=
if [[ -e "${rootpath}/backup/BACKUP/snapshots" ]]; then
  BACKUP="/BACKUP"
fi

m_backuplistPath=${m_mountPath}${BACKUP}"/snapshots/backuplist.xml"
EXCLUDEFILE=${m_mountPath}${BACKUP}"/snapshots/.exclude"
PLOGFILEDIR="${m_mountPath}${BACKUP}/log"
PLOGFILE="$PLOGFILEDIR/log-$(date +%Y%m%d%H%M)"
LOGFILE="/backup"${BACKUP}"/log.txt" #LOGFILE="/tmp/log.txt"

#是否是出厂备份
m_isFactory=false
factory_uuid="00000000-0000-0000-0000-000000000000"
auto_uuid="01234567-0123-0123-0123-0123456789ab"
PERSONAL_EXCLUDEFILE=".exclude.user.txt"
PERSONAL_BACKUPFILE=".user.txt"

#如果/backup不存在，则创建该目录
mkdir -p ${m_mountPath}${BACKUP}

m_restoreUuid=""
m_enabled=""
global_system_usedDisk=0
m_size=0
newSize=0
#-----------------------------------------------------------------
#see backup-auto/autobackup.cpp
getBackupInfo(){
	if [ "$rootpath" = "/" ]; then
		bootinfo=$INFO
	else
		bootinfo=$rootpath$INFO
	fi

	if [ ! -e "$bootinfo" ]; then
		echo "$bootinfo file not exist!"
		exit 200
	fi

	which_line=0
	content=`cat "$bootinfo" | grep -Ev "^#" | grep "=" | awk '{print $1}'`
	for line in $content;
	do
		#parse_device "$device"
		#只读第1行：RECOVERY_DEV_UUID=c965e712-9903-4139-b8da-c6e1eef0af6a
		if [ $which_line -eq 0 ]; then
			m_restoreUuid=`echo $line | sed 's:.*=::' | tr -d "\n"`
			which_line=`expr $which_line + 1`
		else
			m_enabled=`echo $line | sed 's:.*=::' | tr -d "\n"`
			which_line=`expr $which_line + 1`
		fi
	done
}

#-----------------------------------------------------------------

#该函数是对backup-daemon/parsebackuplist.cpp中相应函数的替换
createBackupList(){
	local backuplistDir=${m_mountPath}${BACKUP}"/snapshots/"

	if [ ! -e "$backuplistDir" ]; then
		mkdir -p $backuplistDir
	fi

	if [ ! -e "$m_backuplistPath" ]; then
		#echo "$m_backuplistPath file not exist!"

		#第1行'>'会清空后写文件
		echo "<?xml version='1.0'?>" >$m_backuplistPath
                #echo "<backupList>" >>$m_backuplistPath
                #echo "</backupList>" >>$m_backuplistPath
                echo "<backupList/>" >>$m_backuplistPath #QDomDocument在节点为空时如此生成根节点
	fi
}

#-----------------------------------------------------------------
#see backup-auto/autobackup.cpp
mountBackup()
{
	local myuuid="/dev/disk/by-uuid/"$m_restoreUuid
	#echo "myuuid: $myuuid"

	#support lvm by zhangze
	tmp_root_dev=$(mount|grep " /root "| cut -d ' ' -f 1)
	case "$tmp_root_dev" in
		/dev/mapper/*)
			eval $(dmsetup splitname --nameprefixes --noheadings --rows "${tmp_root_dev#/dev/mapper/}")
			if [ "$DM_VG_NAME" ] && [ "$DM_LV_NAME" ];then
				lvm lvchange -aay -y --sysinit --ignoreskippedcluster "$DM_VG_NAME"
			fi
		;;
	esac

	mount $myuuid $m_mountPath

	mkdir -p $PLOGFILEDIR
    if [ $? -ne 0 ]; then
        echo "Could not create log directory in /backup"
        exit 22
    fi

    touch $PLOGFILE
    if [ $? -ne 0 ]; then
        echo "Could not create log file"
        exit 23
    fi
    echo "Log for backuping and restoring...." >$PLOGFILE

	createBackupList #创建备份信息
}

#-----------------------------------------------------------------
#see backup-auto/autobackup.cpp
umountBackup()
{
	umount $m_mountPath
}

#-----------------------------------------------------------------
#see backup-auto/backupcommon.cpp
#在grub时，根分区为/root；在进入系统后，根分区为/
#parameters: rootDiskName
#返回值 elements=( $totalSize $freeDisk $usedDisk )
caculateDiskSize(){
	local origalParas

	origalParas=(`echo "$@"`)
	num=$[ $# ]

	#if [ $# -ne 2 ]; then
	if [ $num -ne 2 ]; then
		echo "You shoud input the rootDiskName and disk"
		exit
	fi

	local fullDiskName
	local totalSize
	local freeDisk
	local usedDisk

	if [ "${origalParas[1]}" = "/" ]; then
		fullDiskName=${origalParas[0]}
	else
		fullDiskName=${origalParas[0]}${origalParas[1]}
	fi

	if [ ! -e "$fullDiskName" ]; then
		##因为要返回数组，所以下面的echo没有上面用，不会显示，只会作为返回值
		#echo "$fullDiskName not exist!"
		elements=( 0 0 0 )
		echo ${elements[*]}
		return
	fi

	##因为要返回数组，这里不能echo "fullDiskName: $fullDiskName"
	sss=`df -k $fullDiskName | sed '1d' | tr -d "\n"`
	freeDisk=`echo $sss|awk '{print $4}'`
	freeDisk=`expr 1024 \* $freeDisk`
	usedDisk=`echo $sss|awk '{print $3}'`
	usedDisk=`expr 1024 \* $usedDisk`

	#totalSize没有从df命令的第2列来取，该值比下面2个的和还要大
	totalSize=`expr $usedDisk + $freeDisk`

	##因为要返回数组，这里不能echo "freeDisk=$freeDisk"
	##因为要返回数组，这里不能echo "usedDisk=$usedDisk"
	##因为要返回数组，这里不能echo "totalSize=$totalSize"

	#local elements
	elements=( $totalSize $freeDisk $usedDisk )
	echo ${elements[*]}
}

parse_device(){
	device=$1
	if echo $device | grep -E -q "^UUID="; then
		echo $device | sed 's:^UUID=:/dev/disk/by-uuid/:' | tr -d "\n"
	elif echo $device | grep -E -q "^LABEL="; then
		echo $device | sed 's:^LABEL=:/dev/disk/by-label/:' | tr -d "\n"
	else
		echo $device | tr -d "\n"
	fi
}

is_remote(){
	fstype=$1
	if [ nfs = "$fstype" ] || [ nfs4 = "$fstype" ] || [ smbfs = "$fstype" ] || [ cifs = "$fstype" ] || [ coda = "$fstype" ] || [ ncp = "$fstype"  ]; then
	echo yes
	elif [ ncpfs = "$fstype" ] || [ ocfs2 = "$fstype" ] || [ gfs = "$fstype" ] || [ gfs2 = "$fstype" ] || [ ceph = "$fstype" ]; then
	echo yes
	else
	echo no
	fi
}

function caculateDirSize() {
  mkdir -p /backup/snapshots/check/data
  local total_file_size=$(rsync  -aAHXrn --stats --ignore-missing-args --exclude=/backup --exclude=/cdrom --exclude=/dev --exclude=/efi --exclude=/etc/uid_list --exclude=/data/ghost --exclude=/ghost --exclude=/lost+found --exclude=/media --exclude=/mnt --exclude=/proc --exclude=/run --exclude=/swap_file --exclude=/sys --exclude=/tmp --exclude=/var/lib/docker/overlay2 --exclude=/var/lib/kmre/data --exclude=/var/lib/kmre/kmre-*-*/data/media/0/0-麒麟* --exclude=/var/lib/udisks2 --exclude=/var/log --exclude=*/backup/snapshots --exclude=/data/home --exclude=/data/root "${rootpath}/" /backup/snapshots/check/data/ | grep "Total file size:" | awk '{print $4}' | sed 's/,//g')
  total_file_size=$(expr ${total_file_size} + 200000000)
  echo "备份所需空间大小：${total_file_size}" >>$PLOGFILE
  echo "${total_file_size}"
}

#parameters: 无
#返回值：(system_totalSize system_freeDisk system_usedDisk)
caculateSystemSize(){
	local root_totalSize root_freeDisk root_usedDisk
	local system_totalSize system_freeDisk system_usedDisk
	local origalParas
	local found item result
	local device mntdir fstype options dump passno
	local -a alreadyDisks #数组，已经分析过的磁盘目录
	local -a elements #存放返回值

        #alreadyDisks=(${alreadyDisks[*]} "/boot") #插入一个元素"/boot"

	#result=(`caculateDiskSize "$rootpath" "$rootpath"`)
	#origalParas=($rootpath "/") 
	#arg1=`echo ${origalParas[*]}`

	#result=(`caculateDiskSize $arg1`)
	#root_totalSize=${result[0]}
	#root_freeDisk=${result[1]}
	#root_usedDisk=${result[2]}

	#system_totalSize=$root_totalSize
	#system_freeDisk=$root_freeDisk
	#system_usedDisk=$root_usedDisk

	#echo "system_totalSize="$system_totalSize
	#echo "system_freeDisk="$system_freeDisk
	#echo "system_usedDisk="$system_usedDisk

	##############3#caculateDiskSize / /backup
	fstab_path=${rootpath}/etc/fstab

	if [ ! -e "$fstab_path" ]; then
		echo "$fstab_path file not exist!"
		exit 701
	fi
	
	system_totalSize=0
        system_freeDisk=0
        system_usedDisk=0

	while read line;
	do 
	        #取第1个字符
        	if [ "${line:0:1}" = "#" ]; then
                	continue
        	fi  

        	echo $line
		echo $line >>$PLOGFILE

        	device=$( echo "$line"|awk '{print $1}')
        	mntdir=$( echo "$line"|awk '{print $2}')
        	fstype=$( echo "$line"|awk '{print $3}')
        	options=$( echo "$line"|awk '{print $4}')
        	dump=$( echo "$line"|awk '{print $5}')
        	passno=$( echo "$line"|awk '{print $6}')

		device=$(parse_device $device)

		if [[ $options =~ "bind" ]]; then
                    continue
                fi

		# nodev filesystems
		( cat /proc/filesystems | grep "$fstype" | grep -q nodev ) && continue

		# virtual or network filesystems
		[ none = "$mntdir" ] || [ yes = $(is_remote $fstype) ] && continue

		# swap or rootfs
		[ swap = "$fstype" ] && continue
#[ swap = "$fstype" ] || [ / = "$mntdir" ] || [ /home = "$mntdir" ] || [ /var/log = "$mntdir" ]&& continue

	        #取第1个字符
        	if [ ${mntdir:0:1} != "/" ]; then
                	continue
        	fi  

                if [ $mntdir = "/backup" ]; then  #没有写成$m_mountPath,看下面if
                        continue
                fi

                if [ $mntdir = $m_mountPath ]; then  #没有写成$m_mountPath
                        continue
                fi

		#注意: 没有备份数据分区
        	if [ $mntdir = "/data" ]; then
			hasDataPartition=1
        	fi  

        	#echo "1: " $device
        	#echo "2: " $mntdir
        	#echo "3: " $fstype
        	#echo "4: " $options
        	#echo "5: " $dump
        	#echo "6: " $passno

		# not system partition
#		[ no = $(is_system_partition $mntdir) ] && continue

		################计算df $target_mntdir的各项值
		origalParas=($rootpath $mntdir) 
		arg1=`echo ${origalParas[*]}`

		result=(`caculateDiskSize $arg1`)
		disk_totalSize=${result[0]}
		disk_freeDisk=${result[1]}
		disk_usedDisk=${result[2]}

		if [[ $disk_totalSize = $root_totalSize && $disk_freeDisk = $root_freeDisk && $disk_usedDisk = $root_usedDisk ]]; then
			continue
		fi

		#echo "disk_totalSize="$disk_totalSize
		#echo "disk_freeDisk="$disk_freeDisk
		#echo "disk_usedDisk="$disk_usedDisk

		system_totalSize=$( expr $system_totalSize + $disk_totalSize )
		system_freeDisk=$( expr $system_freeDisk + $disk_freeDisk )
		system_usedDisk=$( expr $system_usedDisk + $disk_usedDisk )

		#echo "system_totalSize="$system_totalSize
		#echo "system_freeDisk="$system_freeDisk
		#echo "system_usedDisk="$system_usedDisk

	done < "$fstab_path";

	#echo "system_totalSize="$system_totalSize
	#echo "system_freeDisk="$system_freeDisk
	#echo "system_usedDisk="$system_usedDisk

	#local elements
	elements=( $system_totalSize $system_freeDisk $system_usedDisk )
	echo ${elements[*]}
}

#-----------------------------------------------------------------
#//检查备份还原分区/backup剩余空间是否满足备份需求
#see backup-auto/backupcommon.cpp
#返回值: 0表示/backup剩余容量不能够满足备份需求；1表示满足
checkBackupCapacity() { #(m_rootPath.toStdString().c_str(), retstatus))
	local origalParas
	local root_totalSize root_freeDisk root_usedDisk
	local backup_totalSize backup_freeDisk backup_usedDisk
	local system_totalSize system_freeDisk system_usedDisk
	###which_line=`expr $which_line + 1`

	#从函数caculateSystemSize取返回值
	result=(`caculateSystemSize`)
	system_totalSize=${result[0]}
	system_freeDisk=${result[1]}
	system_usedDisk=${result[2]}

        #global_system_usedDisk=$system_usedDisk
	global_system_usedDisk=$(caculateDirSize)

	#echo "--system_totalSize="$system_totalSize
	#echo "--system_freeDisk="$system_freeDisk
	#echo "--system_usedDisk="$system_usedDisk

	#--------------------------------------------------------
	#result=(`caculateDiskSize "$rootpath" "$rootpath"`)
	origalParas=($rootpath "/") 
	arg1=`echo ${origalParas[*]}`

	result=(`caculateDiskSize $arg1`)
	root_totalSize=${result[0]}
	root_freeDisk=${result[1]}
	root_usedDisk=${result[2]}
	#echo "--root_totalSize="$root_totalSize
	#echo "--root_freeDisk="$root_freeDisk
	#echo "--root_usedDisk="$root_usedDisk

	#--------------------------------------------------------
	#caculateDiskSize / /backup
	#origalParas=($rootpath "/backup") 
	#origalParas=("/" "/backup") #/backup不会是/root/backup
	origalParas=("/" $m_mountPath) #/backup不会是/root/backup
	arg1=`echo ${origalParas[*]}`

	result=(`caculateDiskSize $arg1`)
	backup_totalSize=${result[0]}
	backup_freeDisk=${result[1]}
	backup_usedDisk=${result[2]}

	#echo "--backup_totalSize="$backup_totalSize
	#echo "--backup_freeDisk="$backup_freeDisk
	#echo "--backup_usedDisk="$backup_usedDisk

	if [[ $root_totalSize = $backup_totalSize && $root_freeDisk = $backup_freeDisk && $root_usedDisk = $backup_usedDisk ]]; then #"/backup"是不是一个独立的盘
        	echo "Cannot find the /backup disk or not be mounted!"
        	exit 403
	fi

	#echo "bybobbi: bakup_freeDisk is " $backup_freeDisk
        #echo "bybobbi: system_usedDisk is " $system_usedDisk
	echo "free size : $backup_freeDisk; sys_size : $global_system_usedDisk"
        echo "free size : $backup_freeDisk; sys_size : $global_system_usedDisk" >>$PLOGFILE
	if [ ${backup_freeDisk} -gt ${global_system_usedDisk} ]; then
		return 1 
	else	
		return 0 
	fi
}

updateStateByComment() {
	tmpFile=${m_backuplistPath}".tmp"
	#echo "tmpFile: $tmpFile"
	is_first_line=1

	foundComment=0 #是否发现了要修改的comment

	#如果不定义IFS，则echo $line会去掉前后空格，导致写到文件中去时没有格式
	IFS_old=$IFS
	IFS=$'\n'
	while read line;
	do 
		#去除了前后空格
		xxx=$( echo "$line" | sed "s/^[ \t]*//g" | sed "s/[ \t]*$//g" )
		#echo "xxx: $xxx"

                if [[ "$xxx" =~ "<Comment>" ]]; then
			if [ $xxx = "<Comment>${m_comment}</Comment>" ]; then
				foundComment=1 #当前comment是要修改的mycomment
			else
				foundComment=0 #当前comment不是要修改的mycomment
			fi
		fi

		if [[ "$xxx" =~ "<Size>" ]]; then
		    if [[ $foundComment -eq 1 ]]; then
		        line="        <Size>${newSize}</Size>"
	            fi
		fi

                if [[ "$xxx" =~ "<State>" ]]; then
			if [ $foundComment -eq 1 ]; then
    				line="        <State>${m_state}</State>"
			fi
		fi

		if [ "$is_first_line" -eq 1 ]; then
			echo "$line" >$tmpFile
		else
			echo "$line" >>$tmpFile
		fi
	
		is_first_line=0

	done < "$m_backuplistPath";
	IFS=$IFS_old

	cp -f $tmpFile ${m_backuplistPath}
	rm -f $tmpFile
}

#参照backup-daemon/backupmanager.cpp, 写日志文件
writeLogFile() {
	echo $1 >>$LOGFILE
}

#参照backup-daemon/mountpoint.cpp
bFileExists() {
        local theFile theOldFile
        theOldFile=$1  #必须以"/"开始，但本身是个相对路径，因为没有加rootpath.

        if [ $rootpath = "/" ]; then
                theFile=$theOldFile
        else
                theFile=$theOldFile
                theFile="$rootpath""$theFile"
        fi

        if [ -e "$theFile" ]; then
                echo "$theOldFile" >>$EXCLUDEFILE
        fi
}

#参照backup-daemon/mountpoint.cpp
generateExcludeFile() {
	local backupOrRestore
	backupOrRestore=$1	#0: backup 1:restore

	#exclude的必须是相对目录，其实在efi启动时为/root/data
	#see backup-daemon/mountpoint.cpp, backup-daemon/data/backup-auto-efi
	#also kybackup: exclude.ui databackupdirs.ui dataincbackupdirs.ui
	#if [ ! -e "$restoreDir" ]; then
		#注意下面的>和>>-----------------------------------------------
		echo "/efi" >$EXCLUDEFILE   
		echo "/backup" >>$EXCLUDEFILE
		#echo "/boot/efi" >>$EXCLUDEFILE
		echo "/dev" >>$EXCLUDEFILE
		echo "/ghost" >>$EXCLUDEFILE  #ghost镜像文件
		echo "/mnt" >>$EXCLUDEFILE
		echo "/proc" >>$EXCLUDEFILE
		echo "/run" >>$EXCLUDEFILE
		echo "/sys" >>$EXCLUDEFILE
		echo "/media" >>$EXCLUDEFILE
		echo "/tmp" >>$EXCLUDEFILE
		echo "/lost+found" >>$EXCLUDEFILE
		echo "/var/lib/udisks2" >>$EXCLUDEFILE
		#echo "/data/home/*" >>$EXCLUDEFILE
		#echo "/data/root/*" >>$EXCLUDEFILE
	        #if [ -e "${rootpath}/data/home" ]; then
                #   echo "/home" >>$EXCLUDEFILE
                #   echo "/root" >>$EXCLUDEFILE
                #fi
		echo "/cdrom" >>$EXCLUDEFILE
		echo "/swap_file" >>$EXCLUDEFILE
		echo "/var/lib/docker/overlay2" >>$EXCLUDEFILE
		echo "/var/log" >>$EXCLUDEFILE

		#bind挂载的目录不进行备份或还原
                cat ${rootpath}/etc/fstab | awk '{if($4~/bind/) print $1}' |
                while read excludePath
                do
                    echo "$excludePath" >>$EXCLUDEFILE
                done

		#bFileExists "/etc/.bootinfo"
		#bFileExists "/etc/fpb" 	#管控,暂时
		#echo "/etc/.bootinfo" >>$EXCLUDEFILE
		
		#数据分区是否使用由用户输入，最终放到/backup/snapshots/.excludeuser
		#因为GRUB没有界面，所以是不是先在其他模式下做一次备份，生成这个文件；然后GRUB就可以了。
		#echo "/data/*" >>$EXCLUDEFILE   #用户可以把数据放到该分区或者目录
	
		#是否覆盖备份还原工具自身
		#if [ $backupOrRestore -eq 1 ]; then
		#    bFileExists "/usr/bin/backup-daemon"  	#备份还原
	        #    bFileExists "/usr/bin/kybackup"		#备份还原
		#    bFileExists "/usr/bin/mount_fstab"  	#备份还原
		#    bFileExists "/usr/bin/backup-auto"  	#备份还原
		#    bFileExists "/usr/bin/mount_fstab_efi" 	#备份还原
		#    bFileExists "/usr/bin/backup-auto-efi" 	#备份还原
		#fi

		#是否使用由用户输入，最终放到/backup/snapshots/.excludeuser
        	#if [ "$XGS" = true ]; then
		#    echo "/etc/passwd" >>$EXCLUDEFILE
		#    echo "/etc/group" >>$EXCLUDEFILE
		#    echo "/etc/shadow" >>$EXCLUDEFILE
		#    if [ -e "/etc/uid_list" ]; then
		#	echo "/etc/uid_list" >>$EXCLUDEFILE
		#    fi

		#    echo "/home/*" >>$EXCLUDEFILE
		#    echo "/opt/softmanager/log/log_cur.txt" >>$EXCLUDEFILE
		#    echo "/opt/softmanager/conf/audit/auditLogCur.txt" >>$EXCLUDEFILE
		#    echo "/opt/xgs/Audit/*" >>$EXCLUDEFILE
		#    echo "/opt/LinuxKpc/log/*" >>$EXCLUDEFILE
		#    echo "/var/log/*" >>$EXCLUDEFILE
		#    echo "/var/run/*" >>$EXCLUDEFILE
		#    echo "/root/*" >>$EXCLUDEFILE
		#    echo "/var/mail/*" >>$EXCLUDEFILE
		#    echo "/boot/efi/*" >>$EXCLUDEFILE #xgs出厂还原时会失败
		#fi
	#fi
}

backuping() {
	local src dst

	src=$1
	dst=$2

	#0:backup 1:restore
	generateExcludeFile 0
	echo "/" > ${m_mountPath}${BACKUP}/snapshots/$m_uuid/$PERSONAL_BACKUPFILE
	cp $EXCLUDEFILE ${m_mountPath}${BACKUP}/snapshots/$m_uuid/$PERSONAL_EXCLUDEFILE

	# /boot/efi不再单独备份
	#if [ -d ${src}/boot/efi ];then
	#	mkdir -p ${dst}/boot
	#	rsync -av --ignore-missing-args ${src}/boot/efi ${dst}/boot
	#fi

	echo "Begin to backup..." >>$PLOGFILE
        echo "Begin to backup..."

	mkdir -p ${rootpath}/var/log
	touch ${rootpath}/var/log/backup.log
	#是否有数据分区
	if [ $hasDataPartition -eq 0 ]; then
		#exclude的必须是相对目录，其实在efi启动时为/root/data
		#echo rsync -avAXH --ignore-missing-args --exclude-from $EXCLUDEFILE $src $dst
		#rsync -avAXH --ignore-missing-args --exclude-from $EXCLUDEFILE $src $dst

		#不是目录，也不备份
		echo rsync -avAXH --ignore-missing-args --exclude-from $EXCLUDEFILE $src $dst >>${rootpath}/var/log/backup.log 2>&1
		rsync -avAXH --ignore-missing-args --exclude-from $EXCLUDEFILE $src $dst >>${rootpath}/var/log/backup.log 2>&1
	else
		#exclude的必须是相对目录，其实在efi启动时为/root/data
		#echo rsync -avAXH --ignore-missing-args --exclude data --exclude-from=$EXCLUDEFILE $src $dst
		#The question is that the 'data' directories can not be copied
		echo rsync -avAXH --ignore-missing-args --exclude-from $EXCLUDEFILE $src $dst >>${rootpath}/var/log/backup.log 2>&1
		rsync -avAXH --ignore-missing-args --exclude-from $EXCLUDEFILE $src $dst >>${rootpath}/var/log/backup.log 2>&1
	fi

	if [ $? -eq 0 -o $? -eq 24 -o $? -eq 23 ]; then
		#将状态从"备份未完成"改成"0"
		#updateStateByComment $m_comment 0
		m_state="backup finished"
		touch $dst/.exectl
		updateStateByComment

	else
		echo "backup update backuplist.xml failed for updateBackupAutoFinishedState!";
		m_state="backup unfinished"
		updateStateByComment
	fi

	#写文件
	metainfo_file="${m_mountPath}${BACKUP}/snapshots/$m_uuid/$METAINFO"
	#echo "metainfo_file="$metainfo_file
	#第1行清空写
	#这里写的不是xml文件，是一个文本文件，这时候的状态是0或者backup failed 
	echo "COMMENT=$m_comment" >$metainfo_file
	echo "TIME=$m_time" >>$metainfo_file
	echo "UUID=$m_uuid" >>$metainfo_file
	echo "SIZE=$m_size" >>$metainfo_file
	echo "STATE=$m_state" >>$metainfo_file

	#写日志文件
 	writeLogFile "${m_time},${m_uuid},0,出厂备份,${newSize}" #grub时只有全盘备份，没有增量备份
        echo "sync..." >>$PLOGFILE
	sync
	echo "Backup end..." >>$PLOGFILE
}

CreateUuid() {
    local uuid=`cat /proc/sys/kernel/random/uuid|tr -d "\n"`
    while [ "$uuid" = $factory_uuid -o "$uuid" = $auto_uuid ]
    do
        uuid=`cat /proc/sys/kernel/random/uuid|tr -d "\n"`
    done
    echo $uuid
}

findCommentByUuid() {

	local ret=1
	local local_uuid=$1
    local comment0
	local ret_comment

	#如果不定义IFS，则echo $line会去掉前后空格，导致写到文件中去时没有格式
    IFS_old=$IFS
	IFS=$'\n'
	while read line;
	do
		#去除了前后空格
		xxx=$( echo "$line" | sed "s/^[ \t]*//g" | sed "s/[ \t]*$//g" )
		#echo "xxx: $xxx"

		if [[ "$xxx" =~ "<Comment>" ]]; then
        	comment0=`echo $xxx | awk -F "<Comment>" '{print $2}' |awk -F "</Comment>" '{print $1}' | tr -d "\n"`
		fi

		if [[ "$xxx" =~ "<Uuid>" ]]; then
			if [ $xxx = "<Uuid>${local_uuid}</Uuid>" ]; then
				ret=0
				ret_comment=$comment0
				break
			fi
		fi
	done < "$m_backuplistPath";
	IFS=$IFS_old

	echo $ret_comment
	return $ret
}

deleteItemByComment() {
    local local_comment=$1
#    echo "arg local_comment = $local_comment"

    tmpFile=${m_backuplistPath}".tmp"
    cp -f ${m_backuplistPath} $tmpFile
#    echo "tmpFile: $tmpFile"

    local foundComment=0 #是否发现了要修改的comment
    local i=0
    local ii=0
    local iii=0
    local backupPointTmp=0

    #如果不定义IFS，则echo $line会去掉前后空格，导致写到文件中去时没有格式
    IFS_old=$IFS
    IFS=$'\n'
    while read line;
    do
        let i+=1
        #去除了前后空格
        xxx=$( echo "$line" | sed "s/^[ \t]*//g" | sed "s/[ \t]*$//g" )
        #echo "xxx: $xxx"

        if [[ "$xxx" =~ "<BackupPoint>" ]]; then
			backupPointTmp=$i
        fi
        if [[ "$xxx" =~ "<Comment>" ]]; then
			if [ $xxx = "<Comment>$local_comment</Comment>" ]; then
				foundComment=1 #当前comment是要修改的mycomment
				ii=$backupPointTmp
#				echo "delete foundComment = 1"
			else
				foundComment=0 #当前comment不是要修改的mycomment
			fi
        fi
        if [[ "$xxx" =~ "</BackupPoint>" ]]; then
        	if [ $foundComment -eq 1 ]; then
   	        	iii=$i
                	break
            fi
        fi
    done < "$tmpFile";
    IFS=$IFS_old

#    echo "ii: $ii, iii: $iii"
    if [ $iii -ne 0 ]; then
    	sed -i "${ii},${iii}d" $tmpFile
        cp -f $tmpFile ${m_backuplistPath}
    fi
    rm -f $tmpFile
}

DeleteFactoryBackup() {
	if [ -e "/backup${BACKUP}/snapshots/{${factory_uuid}}" ]; then
		rm /backup${BACKUP}/snapshots/{${factory_uuid}} -rf
	fi

	local comment=$(findCommentByUuid "{${factory_uuid}}")
	echo "DeleteFactoryBackup comment is $comment"
	if [ $? -eq 0 ]; then
		deleteItemByComment "$comment"
	fi
}

#see backup-auto/autobackup.cpp
backupAuto() { #备份
	if [ $m_isFactory = true ]; then
		DeleteFactoryBackup
	fi
	local xxx
	checkBackupCapacity
	ret=$?
	if [ "$ret" -eq 0 ]; then
		echo "The backup disk space is not enough"
		exit 100
	fi

	#global_system_usedDisk
	#创建一个uuid
	if [ $m_isFactory = false ]; then
                m_uuid=$(CreateUuid)
        else
                m_uuid="$factory_uuid"
        fi
        m_uuid="{"${m_uuid}"}"
	echo "BYbobbi: m_uuid is $m_uuid"
	m_time=`date "+%y-%m-%d %H:%M:%S"|tr -d "\n"`
	m_comment=$m_time #这个是全局变量
	dst="${m_mountPath}${BACKUP}/snapshots/${m_uuid}/data"
	#echo "dst: $dst"
	mkdir -p $dst
	m_size=$global_system_usedDisk

	#m_size=188248
	newSize1=$( echo "scale=2;$m_size / $GB"|bc)
	newSize2=$( echo "scale=2;$m_size / $MB"|bc)
	newSize3=$( echo "scale=2;$m_size / $KB"|bc)

	if [ $( echo "$newSize1 > 1.0"|bc ) = 1 ]; then
		newSize=$newSize1"GB"
	elif [ $( echo "$newSize2 > 1.0"|bc ) = 1 ]; then
		newSize=$newSize2"MB"
	else
		newSize=$newSize3"KB"
	fi

	state="backup unfinished"

	#写入文件m_backuplistPath=$m_mountPath"/snapshots/backuplist1.xml"
	#bool AutoBackup::backupAuto()251 if (!m_parse->addItem(m_comment, time, m_uuid, newsize, "backup unfinished")) {
	#
	tmpFile=${m_backuplistPath}".tmp"
	#echo "tmpFile: $tmpFile"
	new_content=""
	is_first_line=1

	hasHead=false #有头吗"<backupList>"

	#如果不定义IFS，则echo $line会去掉前后空格，导致写到文件中去时没有格式
	IFS_old=$IFS
	IFS=$'\n'

	while read line;
	do 
		#去除了前后空格
		xxx=$( echo "$line" | sed "s/^[ \t]*//g" | sed "s/[ \t]*$//g" )
		#echo "xxx: $xxx"

                if [[ "$xxx" =~ "<backupList>" ]]; then
                        hasHead=true
                fi

                if [[ "$xxx" =~ "<backupList/>" ]]; then
                        xxx="</backupList>"  #与图形界面一致
                        line="</backupList>"
                fi

		#插入新的记录
		if [ $xxx = "</backupList>" ]; then
                        if [ "$hasHead" = false ]; then
                                echo "<backupList>" >>$tmpFile
                                hasHead=true
                        fi

    			echo "    <BackupPoint>" >>$tmpFile
    			echo "        <Comment>$m_comment</Comment>" >>$tmpFile
    			echo "        <Time>$m_time</Time>" >>$tmpFile
    			echo "        <Uuid>$m_uuid</Uuid>" >>$tmpFile
    			echo "        <Size>$newSize</Size>" >>$tmpFile
    			echo "        <State>$state</State>" >>$tmpFile
    			echo "        <Type>0</Type>" >>$tmpFile
    			echo "    </BackupPoint>" >>$tmpFile
		fi

		if [ "$is_first_line" -eq 1 ]; then
			echo "$line" >$tmpFile
		else
			echo "$line" >>$tmpFile
		fi
	
		is_first_line=0

	done < "$m_backuplistPath";
	IFS=$IFS_old

	cp -f $tmpFile ${m_backuplistPath}
	rm -f $tmpFile

	#写文件
	metainfo_file="${m_mountPath}${BACKUP}/snapshots/$m_uuid/$METAINFO"
	#echo "metainfo_file="$metainfo_file
	#第1行清空写
	#这里写的不是xml文件，是一个文本文件，这时候的状态是backup unfinished
	echo "COMMENT=$m_comment" >$metainfo_file
	echo "TIME=$m_time" >>$metainfo_file
	echo "UUID=$m_uuid" >>$metainfo_file
	echo "SIZE=$m_size" >>$metainfo_file
	echo "STATE=$state" >>$metainfo_file
	echo "TYPE=0" >>$metainfo_file

	backuping ${rootpath}/ $dst
}

#返回值：
getLastUsefulBackupPointUuid() {
	local xxx currentUuid foundComment
	currentUuid=""
	currentState=false
	currentType=true
	lastUsefulBackupPointUuid=""
	foundComment=0 #是否发现了要修改的comment

	#如果不定义IFS，则echo $line会去掉前后空格，导致写到文件中去时没有格式
	IFS_old=$IFS
	IFS=$'\n'
	while read line;
	do 
		#去除了前后空格
		xxx=$( echo "$line" | sed "s/^[ \t]*//g" | sed "s/[ \t]*$//g" )
		#echo "xxx: $xxx"

                if [[ "$xxx" =~ "<Uuid>" ]]; then
			currentUuid=$xxx
			currentState=false
			currentType=true
		fi

                if [[ "$xxx" =~ "<State>backup finished</State>" ]]; then
			#lastUsefulBackupPointUuid=$currentUuid
			currentState=true
		fi

                if [[ "$xxx" =~ "<Type>2</Type>" ]]; then
			currentType=false
		fi

                if [[ "$xxx" =~ "<Type>3</Type>" ]]; then
			currentType=false
		fi


                if [[ "$xxx" =~ "</BackupPoint>" ]]; then
			if [ "$currentState" = true -a "$currentType" = true ]; then #"/backup"是不是一个独立的盘
			        lastUsefulBackupPointUuid=$currentUuid
			fi
		fi
	done < "$m_backuplistPath";
	IFS=$IFS_old

	if [ "$lastUsefulBackupPointUuid" = "" ]; then
		echo "can't find a useful backup for restoring"
		exit 300
	fi

	lastUsefulBackupPointUuid=`echo $lastUsefulBackupPointUuid | sed 's:<Uuid>::' | tr -d "\n"`
	lastUsefulBackupPointUuid=`echo $lastUsefulBackupPointUuid | sed 's:</Uuid>.*::' | tr -d "\n"`
	#echo "lastUsefulBackupPointUuid=$lastUsefulBackupPointUuid"
}

#see backup-auto/autobackup.cpp
restoreAuto() { #还原
	local xxx

	getLastUsefulBackupPointUuid
	#echo "lastUsefulBackupPointUuid=$lastUsefulBackupPointUuid"

	#写日志文件
	local m_time=`date "+%y-%m-%d %H:%M:%S"|tr -d "\n"`
 	writeLogFile "${m_time},${lastUsefulBackupPointUuid},4,grub系统还原" #grub时只有一键还原，没有增量还原

	restoreDir="${m_mountPath}${BACKUP}/snapshots/$lastUsefulBackupPointUuid"

	if [ ! -e "$restoreDir" ]; then
		echo "full restore directory not exists!"
		exit 301 #备份文件不存在，不能还原系统
	fi

	#0:backup 1:restore
	generateExcludeFile 1

        if [ -d "${restoreDir}/data/efi" ];then
          mkdir -p ${rootpath}/boot
          rsync -avAXHr --no-inc-recursive --ignore-missing-args --delete ${restoreDir}/data/efi ${rootpath}/boot
	elif [ -d "${restoreDir}/data/boot/efi" ];then
          mkdir -p ${rootpath}/boot
          rsync -avAXHr --no-inc-recursive --ignore-missing-args --delete ${restoreDir}/data/boot/efi ${rootpath}/boot
        fi
	#yi jian huan yuan
	if [ ! -e "$restoreDir/data/data" ]; then
		#这两行要一致
		echo "rsync -avAXHr --no-inc-recursive --ignore-missing-args --delete --exclude /data --exclude-from $restoreDir/$PERSONAL_EXCLUDEFILE $restoreDir/data/ $rootpath >/dev/null 2>${rootpath}/var/log/backup.log"
		rsync -avAXHr --no-inc-recursive --ignore-missing-args --delete --exclude /data --exclude-from $restoreDir/$PERSONAL_EXCLUDEFILE $restoreDir/data/ $rootpath >/dev/null 2>${rootpath}/var/log/backup.log
	else
		#这两行要一致
		echo "rsync -avAXHr --no-inc-recursive --ignore-missing-args --delete --exclude-from $restoreDir/$PERSONAL_EXCLUDEFILE $restoreDir/data/ $rootpath >/dev/null 2>${rootpath}/var/log/backup.log"
		rsync -avAXHr --no-inc-recursive --ignore-missing-args --delete --exclude-from $restoreDir/$PERSONAL_EXCLUDEFILE $restoreDir/data/ $rootpath >/dev/null 2>${rootpath}/var/log/backup.log
	fi

	if [ $? -ne 0 -a $? -ne 24 -a $? -ne 23 ]; then
		echo "full restore process finished failed!"
		exit 303
	fi

	#还原时清空目录
	#if [ -e "$rootpath/home/data" ]; then
	#	rm -r "$rootpath/home/data" ]
	#fi
	#mkdir -p "$rootpath/home/data" ]
}

#-----------------------------------------------------------------
#see backup-auto/autobackup.cpp
updateBackupAutoFinishedState() {
	echo "this is updateBackupAutoFinishedState"

}

#-----------------------------------------------------------------
#--------主程序从这里开始-----------------------------------------

if [ "${rootpath}" = "/" ]; then
	echo "This program is used in boot time"
#	exit
fi

getBackupInfo
#echo "m_restoreUuid="$m_restoreUuid
#echo "m_enabled="$m_enabled
#不加引号报错
if [ "$m_restoreUuid" = "" ] || [ "$m_enabled" = "" ]; then
	echo "bootinfo file is not correct!"
	exit 202
fi

if [ $backupORrestore = "--autobackup" ]; then
	mountBackup
	backupAuto		#备份, grub时只有全盘备份，没有增量备份
	updateBackupAutoFinishedState
	#umountBackup

	echo "This is autobackup"

elif [ $backupORrestore = "--autorestore" ]; then
	mountBackup
	restoreAuto		#还原, grub时只有一键还原，没有增量还原
	#umountBackup
	echo "This is autorestore"

elif [ $backupORrestore = "--factorybackup" ]; then
        m_isFactory=true
        mountBackup
	mount >>$PLOGFILE
        backupAuto              #备份, grub时只有全盘备份，没有增量备份
        updateBackupAutoFinishedState
        #umountBackup

        echo "This is factorybackup"
else
	echo "Not correct command"
	exit 1
fi

exit 0