V2171 A12

A12_ThreeD_DoubleEllipse_Laminar_Struct_4CPU/bin/cfd_para.hypara

@@ -27,9 +27,6 @@
 //             0 -- Not.
 //             1 -- Yes.
 // iadapt: Adaptation number for unstructure grid.
-// iovrlap: Overlapping(overset) grid or not.
-//             0 -- NON-overlapping grid.
-//             1 -- Overlapping grid.
 // SymmetryFaceVector: The vector of symmetry face.
 //             0 -- X axis.
 //             1 -- Y axis.
@@ -38,7 +35,6 @@ int gridtype            = 0;
 int gridobj             = 1;
 int multiblock          = 0;
 int iadapt              = 0;
-int iovrlap             = 0;
 int SymmetryFaceVector  = 1;
 
 // axisup: Type of Cartisien coordinates system, used in grid conversion.
@@ -83,6 +79,7 @@ string out_gfile  = "./grid/flat_laminr_133_85_2d.fts";
 // iunsteady: The Grid is for unsteady simulation or not.
 int iunsteady = 0;
 int iale      = 0;
+int codeOfAleModel = 0;
 
 // fileformat: Ustar Grid file format.
 //             0 -- BINARY.
@@ -165,6 +162,11 @@ int traceMark        = 0;
 int blockIndexOfMark = 0;
 int cellIndexOfMark[] = [185,30,1];
 
+// parallel Strategy:
+//! -# 0 : each zone is assigned to the one that defined in grid partition procedure.
+//! -# 1 : random assigned for each zone or by some else ways.
+int parallelStrategy = 1;  
+
 //-----------------------------------------------------------------------
 #                           File path                                   #
 //-----------------------------------------------------------------------
@@ -283,6 +285,7 @@ double wallTemperature = -1.0;
 double radiationCoef = 0.8;
 double gridScaleFactor = 1.0;
 
+int numberOfAerodynamicForceComponents = 1;
 double forceRefenenceLengthSpanWise = 1.0;    // unit of meter.
 double forceRefenenceLength = 1.0;            // unit of meter.
 double forceRefenenceArea = 1.0;              // unit of meter^2.
@@ -435,7 +438,7 @@ double roeEntropyScale  = 1.0;
 //               1 --Global.
 // visl_min: Minimum value of laminar viscosity coefficient.
 // turbCFLScale: Turbulence model cfl number factor.
-// iale: Arbitrary Lagrangian-Eulerian method.
+// codeOfAleModel: Arbitrary Lagrangian-Eulerian method.
 //               0 -- no ALE method.
 //               1 -- ALE method for non-moving grids.
 //               2 -- ALE method for moving grids.
@@ -452,7 +455,9 @@ double physicalTimeStep = 0.01;
 int    ifStartFromSteadyResults = 0;
 int    ifStaticsFlowField = 0;
 int    startStatisticStep = 800000;
+int    linearTwoStepMethods = 1;    // 1--BDF1; 2--C-N; 3--BDF2;
 
+int    methodOfDualTime = 3;
 int    min_sub_iter = 50;
 int    max_sub_iter = 50;
 double tol_sub_iter = 0.01;
@@ -474,11 +479,11 @@ int    order        = 2;
 
 double visl_min = 0.01;
 double turbCFLScale = 1.0;
-
+double csrv     = 2.0;
 double timemax  = 1.0e10;
 double dtsave   = -1.0;
-int    iale     = 0;
+int    codeOfAleModel   = 0;
-int    ialetype = 2;
+int    aleStartStrategy = -1;
 int    maxale   = 10;
 double dtau     = 0.001;
 
@@ -502,7 +507,7 @@ double lamda[] = 0.5, 1.0;
 // IMPORTANT WARNING: The file index should be ignored,
 //                    e.g. if the partitioned grid is rae2822_hybrid2d__4_0.fts,
 //                    please use 'rae2822_hybrid2d__4.fts' here!
-// isPlotVolumeField: If dump out the field results to visulization.
+// plotFieldType: If dump out the field results to visulization.
 // walldistMethod: The method to compute wall distance.
 //                 0 -- accurate but not fast enough.
 //                 1 -- fast but not accurate enough.
@@ -538,9 +543,10 @@ string wall_varfile       = "";
 
 string jetDefineFile      = "bin/jet.hypara";
 
-string overset_gridfile   = "iblank.ovs";
+string overset_gridfile   = "results/iblank.ovs";
+string sixDofFileName     = "results/sixDofInfo.dat";
 
-int    isPlotVolumeField  = 0;
+int plotFieldType = 0;
 
 // visualfileType: The file type of visualfile.
 //                 0 -- Tecplot binary.
@@ -575,7 +581,7 @@ double upperPlotFieldBox[] = [1.0 1.0 1.0];
 //                   -- modeledTKE(18), modeleddissipationrate(19), SSTF1(20), SSTF2(21), 
 //                   -- vibration temperature(Tv, 33), electron temperature(Te, 34), vibrational energy(Ev, 35), electric energy(Ee, 36),
 //                   -- number density of electron(Ne, 37), dimensioanl density(rho, 38), dimensioanl pressure(p, 39), dimensioanl temperature(T, 40),
-//                   -- gradientUx(41), gradientUy(42), gradientVx(43), gradientVy(44).
+//                   -- gradientUx(41), gradientUy(42), gradientVx(43), gradientVy(44), iblank(81).
 // Important Warning: Array size of visualVariables MUST be equal to nVisualVariables!!!
 // Variables order must from small to big.
 int nVisualVariables = 8;
@@ -585,19 +591,48 @@ int visualVariables[] = [0, 1, 2, 3, 4, 5, 6, 15];
 //                    1 -- Turbulent flat plate.
 int dumpStandardModel = 0;
 
-// ifSetProbesToMonitor: Set probes location to Monitor.
+// ifSetDataMonitor: Whether to set the data monitor.
-//              0 -- Do not monitor.
+//                   0 -- No.
-//              1 -- To monitor and save data to files.
+//                   1 -- Yes.
-// probesDefineFile: probes location information file.
+// dataMonitorType: The type of data Monitor.
+//                  0 -- Probes data monitor.
+//                  1 -- Lines data monitor.
+//                  2 -- Surfaces data monitor.
+// probesDefineFile: Probes location information file.
+// nLines: The number of lines need to be monitored.
+// linesDefineFile: Lines location information file.
+// nSurfaces: The number of surfaces need to be monitored.
+// surfacesDefineFile: Surfaces location information file.
+// searchCellsMethod: method to search the cell of each probe.
+//                    0 -- Nearest cell to the probe.
+//                    1 -- Real cell where the probe is located.
 // nProbeVariables: Number of variables want to be dumped for probes monitered.
 // probeVariables : Variable types dumped, listed as following:
 //                  -- density(0), u(1), v(2), w(3), pressure(4), temperature(5).
 // Important Warning: Array size of probeVariables MUST be equal to nProbeVariables!!!
 // probeVariables order must from small to big.
-int    ifSetProbesToMonitor  = 0;
+// probeVariablesInterpolationMethod: Interpolation method used to compute the probe variables.
-string probesDefineFile      = "bin/probes_location.hypara";
+//                 0 -- Take the value of probe's cell as probe real value.
+//                 1 -- Interpolation from probe's and neighbouring cell to probe.
+//                 2 -- Interpolation from probe's cell nodes to probe.
+int ifSetDataMonitor = 0;
+
+int    dataMonitorType = 0;
+string probesDefineFile = "bin/probes_XYZ.dat";
+
+//int    dataMonitorType = 1;
+//int    nLines = 1;
+//string linesDefineFile = "bin/lines_XYZ.dat";
+
+//int    dataMonitorType = 2;
+//int    nSurfaces = 4;
+//string surfacesDefineFile = "bin/surfaces_XYZ.dat";
+
+int searchCellsMethod = 0;
+
 int nProbeVariables  = 6;
 int probeVariables[] = [0, 1, 2, 3, 4, 5];
+int probeVariablesInterpolationMethod  = 0;
 //-----------------------------------------------------------------------
 #                           Turbulence Parameter                        #
 //-----------------------------------------------------------------------
@@ -613,8 +648,10 @@ int kindOfTurbSource = 0;
 int mod_turb_res     = 0;
 double turb_relax    = 1.0;
 double freeStreamViscosity = 1.0e-3;
-double muoo          = 1.0e-1;
+double muoo          = 3.0;
-double kwoo          = 1.0;
+double kwoo          = 5.0;
+int transitionType   = 0;
+double turbIntensity = -1.0;
 
 # maximum eddy viscosity (myt/my) max.
 double eddyViscosityLimit = 1.0e10;
@@ -844,6 +881,30 @@ double MUSCLCoefXk = -1;
 double MUSCLCoefXb = 1.0;
 int  allReduceStep = 1;
 
+// ----------------- overlap configuration ------------------------------
+// codeOfOversetGrid: Overlapping(overset) grid or not.
+//             0 -- NON-overlapping grid.
+//             1 -- Overlapping grid.
+int    codeOfOversetGrid           = 0;
+int    codeOfOversetSlipGrid       = 0;
+int    readOversetFileOrNot        = 0;
+int    symetryOrNot                = 0;
+int    readInAuxiliaryInnerGrid    = 1;
+int    readInAuxiliaryOuterGrid    = 0;
+int    readInSklFileOrNot          = 0;
+string auxiliaryInnerGrid0         = "./grid/aux-upper.fts";
+string auxiliaryInnerGrid1         = "./grid/aux-lower.fts";
+string auxiliaryInnerGrid2         = "";
+string oversetGridFileName         = "./grid/overlap.ovs";
+double walldistMainZone            = 1.0
+double toleranceForOversetSearch   = 1.0e-3;
+double toleranceForOversetBox      = 1.0e-3;
+int    twoOrderInterpolationOrNot  = 0;
+int    keyEnlargeOfActiveNodes     = 0;
+int    outTecplotOverset           = 0;
+
+int     numberOfMovingBodies       = 2;
+
 // ---------------- ATP read --------------------------------------------
 //@int    inflowParaType            = 0;
 //@double refReNumber               = 2.329418E08;
@@ -854,3 +915,9 @@ int  allReduceStep = 1;
 //@int nsubsonicOutlet              = 0;
 //@string inLetFileName             = "./bin/subsonicInlet.hypara";
 //@string outLetFileName            = "./bin/subsonicOutlet.hypara";
+
+#########################################################################
+#                             Old Parameter                             #
+#########################################################################
+int isPlotVolumeField = 0;
+

A12_ThreeD_DoubleEllipse_Laminar_Struct_4CPU/bin/cfd_para_hypersonic.hypara

@@ -158,10 +158,10 @@ double ktmax = 1.0e10;
 // IMPORTANT WARNING: The file index should be ignored,
 //                     e.g. if the partitioned grid is rae2822_hybrid2d__4_0.fts,
 //                     Please use 'rae2822_hybrid2d__4.fts' here!
-// isPlotVolumeField: If dump out the whole field results to tecplot or not, 0 / 1.
+// plotFieldType: If dump out the whole field results to tecplot or not, 0 / 1.
 
 string gridfile = "./grid/DoubleEllipse__4.fts";
-int isPlotVolumeField = 0;
+int plotFieldType = 0;
 
 // ----------------- Advanced Parameters, DO NOT care it ----------------
 // nVisualVariables: Number of variables want to be dumped for tecplot visualization.

A12_ThreeD_DoubleEllipse_Laminar_Struct_4CPU/bin/key.hypara

@@ -47,7 +47,6 @@ string parafilename = "./bin/cfd_para_hypersonic.hypara";
 //string parafilename = "./bin/post_processing.hypara";
 
 // ---------------- Advanced Parameters, DO NOT care it ----------------
-int iovrlap               = 0;
 int numberOfGridProcessor = 0;
 // ATP read
 //@string parafilename1 = ""

ThreeD_DoubleEllipse_Laminar_Struct_4CPU/bin/boundary_condition.hypara

@@ -1,48 +0,0 @@
-# nBoundaryConditons : number of global boundary conditions.
-# bcName             : Boundary Condition Name.
-# bcType(in PHengLEI): Boundary Condition Type.
-
-# Account of how to set boundaryconditon.
-# string bcName = "Farfield";          
-# {                                      
-#   int bcType = 4;                      
-#   int inflowParaType = 1;              
-#   double attackd = 0;                  
-#   double refReNumber = 6.5e6;          
-#   double refMachNumber = 3.5;          
-#   double angleSlide = 0;               
-# }                                      
-
-int nBoundaryConditons = 4;
-string bcName = "SOLID_SURFACE";
-{
-  int bcType = 2;
-}
-string bcName = "SYMMETRY";
-{
-  int bcType = 3;
-}
-string bcName = "INFLOW";
-{
-  int bcType = 5;
-}
-string bcName = "OUTFLOW";
-{
-  int bcType = 6;
-}
-
-# 'bcType' is defined as following:
-#    99: PERIODIC                  
-#    -2: WAKE                      
-#    -1: INTERFACE                 
-#    0 : NO_BOUNDARY_CONDITION     
-#    1 : EXTRAPOLATION             
-#    2 : SOLID_SURFACE             
-#    3 : SYMMETRY                  
-#    4 : FARFIELD                  
-#    5 : INFLOW                    
-#    6 : OUTFLOW                   
-#    52: PRESSURE_INLET            
-#    62: PRESSURE_OUTLET           
-#    61: OUTFLOW_CONFINED          
-#    7 : POLE