!151 翻译 arm上安装openKylin.md

Merge pull request !151 from ka233siji/master

en/Community-Developer-Guides/install_openKylin_on_arm.md

@@ -0,0 +1,130 @@
+---
+title: install openKylin on arm
+description: 
+published: true
+date: 2023-01-12T02:42:26.148Z
+tags: 
+editor: markdown
+dateCreated: 2023-01-12T02:36:15.135Z
+---
+
+# 1 Install openKylin on coolpi
+
+## 1.1 Download the image
+
+Download via the following link:
+
+https://www.openkylin.top/downloads
+
+Right click to extract the `.img` file directly after download.
+
+
+
+## 1.2 Burning image
+
+Install the burner: https://www.raspberrypi.com/software/
+
+![arm64_installation_address_of_the_burner.png](./assets/arm64-system-installation/arm64_installation_address_of_the_burner.png)
+
+Insert the SD card, open rpi-imager, select custom image, then select the installed `.img` file.
+
+![arm64_burner_image_selection.png](./assets/arm64-system-installation/arm64_burner_image_selection.png)
+
+
+Select the SD card, click WRITE, and wait for the procedure to be completed.
+
+![arm64_sd_card_selection_for_burner.png](./assets/arm64-system-installation/arm64_sd_card_selection_for_burner.png)
+
+
+
+## 1.3 Launch openKylin on coolpi
+
+Plug in the power cable and monitor cable of the coolpi development board, connect the keyboard and mouse, and insert the SD card.
+
+![arm64_coolpi_wiring_method.png](./assets/arm64-system-installation/arm64_coolpi_wiring_method.png)
+During launch, the screen may remain black, or it may suddenly enter a faulty kylin OS (this is due to an error on the coolpi board when loading the SD card). To solve this problem, unplug and re-plug the power cable, then reboot.
+
+Go to the login interface, enter your username and password to login to your desktop (password: kk123123).
+
+![arm64_login_interface.png](./assets/arm64-system-installation/arm64_login_interface.png)
+![arm64_desktop.png](./assets/arm64-system-installation/arm64_desktop.png)
+
+
+
+## 1.4 Other problems
+### 1.4.1 System lag
+
+This problem is caused by the high CPU usage of the window manager. Go to the control panel and turn off the performance mode to alleviate the lag.
+
+![arm64_turn_off_the_performance_mode.png](./assets/arm64-system-installation/arm64_turn_off_the_performance_mode.png)
+
+
+### 1.4.2 Bluetooth service is not started
+
+This problem is caused by an error during Bluetooth self-boot. Press `win+t` to open a terminal, enter `sudo systemctl start bluetooth` to start the Bluetooth service. Then you will see the Bluetooth module in the control panel.
+
+![arm64_enable_bluetooth_service.png](./assets/arm64-system-installation/arm64_enable_bluetooth_service.png)
+
+
+### 1.4.3 Screen remains black when waking up after turning off the display or sleep
+
+To avoid this problem, it is recommended that you set the monitor to never turn off and the system to never sleep in the control panel.
+
+![arm64_cancel_sleep_and_cancel_turning_off_the_display.png](./assets/arm64-system-installation/arm64_cancel_sleep_and_cancel_turning_off_the_display.png)
+
+# 2 Install openKylin on Raspberry PI
+
+## 2.1 Download the image
+
+Download via the following link:
+
+https://www.openkylin.top/downloads
+
+Right click to extract the `.img` file directly after download.
+
+
+## 2.2 Burning image
+
+Install the burner: https://www.raspberrypi.com/software/
+
+![arm64_installation_address_of_the_burner.png](./assets/arm64-system-installation/arm64_installation_address_of_the_burner.png)
+
+Insert the SD card, open rpi-imager, select custom image, then select the installed `.img` file.
+
+![arm64_burner_image_selection.png](./assets/arm64-system-installation/arm64_burner_image_selection.png)
+
+
+Select the SD card, click WRITE, and wait for the procedure to be completed.
+
+![arm64_sd_card_selection_for_burner.png](./assets/arm64-system-installation/arm64_sd_card_selection_for_burner.png)
+
+
+
+
+## 2.3 Launch openKylin on Raspberry PI
+
+Plug in the power cable, monitor cable, connect the keyboard and mouse, plug in the SD card.
+
+![arm64 raspberry pi wiring method.png](./assets/arm64-system-installation/arm64_raspberry_pi_wiring_method.png)During launch, the screen may remain black. To solve this problem, unplug and re-plug the power cable, then reboot.
+
+Enter the login interface, select ukui-Wayland at the bottom right, and then enter the user name and password, you can login to the desktop (password: kk123123). (Because this image lacks X11-related packages, kwin-x11 cannot be used to enter the desktop).
+
+![arm64_select_to_login_on_wayland.png](./assets/arm64-system-installation/arm64_select_to_login_on_wayland.png)
+![arm64_login_interface.png](./assets/arm64-system-installation/arm64_login_interface.png)
+![arm64_desktop.png](./assets/arm64-system-installation/arm64_desktop.png)
+
+
+
+## 2.4 Other problems
+### 2.4.1 System lag
+
+This problem is caused by the high CPU usage of the window manager. Go to the control panel and turn off the performance mode to alleviate the lag.
+
+![arm64_turn_off_the_performance_mode.png](./assets/arm64-system-installation/arm64_turn_off_the_performance_mode.png)
+
+
+### 2.4.2 Screen remains black when waking up after turning off the display or sleep
+
+To avoid this problem, it is recommended that you set the monitor to never turn off and the system to never sleep in the control panel.
+
+![arm64_cancel_sleep_and_cancel_turning_off_the_display.png](./assets/arm64-system-installation/arm64_cancel_sleep_and_cancel_turning_off_the_display.png)