aosp12/art/test/ti-agent/ti_utf.h

/*
 * Copyright (C) 2017 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef ART_TEST_TI_AGENT_TI_UTF_H_
#define ART_TEST_TI_AGENT_TI_UTF_H_

#include <inttypes.h>
#include <string.h>

#include "android-base/logging.h"

namespace art {
namespace ti {

inline size_t CountModifiedUtf8Chars(const char* utf8, size_t byte_count) {
  DCHECK_LE(byte_count, strlen(utf8));
  size_t len = 0;
  const char* end = utf8 + byte_count;
  for (; utf8 < end; ++utf8) {
    int ic = *utf8;
    len++;
    if (LIKELY((ic & 0x80) == 0)) {
      // One-byte encoding.
      continue;
    }
    // Two- or three-byte encoding.
    utf8++;
    if ((ic & 0x20) == 0) {
      // Two-byte encoding.
      continue;
    }
    utf8++;
    if ((ic & 0x10) == 0) {
      // Three-byte encoding.
      continue;
    }

    // Four-byte encoding: needs to be converted into a surrogate
    // pair.
    utf8++;
    len++;
  }
  return len;
}

inline uint16_t GetTrailingUtf16Char(uint32_t maybe_pair) {
  return static_cast<uint16_t>(maybe_pair >> 16);
}

inline uint16_t GetLeadingUtf16Char(uint32_t maybe_pair) {
  return static_cast<uint16_t>(maybe_pair & 0x0000FFFF);
}

inline uint32_t GetUtf16FromUtf8(const char** utf8_data_in) {
  const uint8_t one = *(*utf8_data_in)++;
  if ((one & 0x80) == 0) {
    // one-byte encoding
    return one;
  }

  const uint8_t two = *(*utf8_data_in)++;
  if ((one & 0x20) == 0) {
    // two-byte encoding
    return ((one & 0x1f) << 6) | (two & 0x3f);
  }

  const uint8_t three = *(*utf8_data_in)++;
  if ((one & 0x10) == 0) {
    return ((one & 0x0f) << 12) | ((two & 0x3f) << 6) | (three & 0x3f);
  }

  // Four byte encodings need special handling. We'll have
  // to convert them into a surrogate pair.
  const uint8_t four = *(*utf8_data_in)++;

  // Since this is a 4 byte UTF-8 sequence, it will lie between
  // U+10000 and U+1FFFFF.
  //
  // TODO: What do we do about values in (U+10FFFF, U+1FFFFF) ? The
  // spec says they're invalid but nobody appears to check for them.
  const uint32_t code_point = ((one & 0x0f) << 18) | ((two & 0x3f) << 12)
      | ((three & 0x3f) << 6) | (four & 0x3f);

  uint32_t surrogate_pair = 0;
  // Step two: Write out the high (leading) surrogate to the bottom 16 bits
  // of the of the 32 bit type.
  surrogate_pair |= ((code_point >> 10) + 0xd7c0) & 0xffff;
  // Step three : Write out the low (trailing) surrogate to the top 16 bits.
  surrogate_pair |= ((code_point & 0x03ff) + 0xdc00) << 16;

  return surrogate_pair;
}

inline void ConvertUtf16ToModifiedUtf8(char* utf8_out,
                                       size_t byte_count,
                                       const uint16_t* utf16_in,
                                       size_t char_count) {
  if (LIKELY(byte_count == char_count)) {
    // Common case where all characters are ASCII.
    const uint16_t *utf16_end = utf16_in + char_count;
    for (const uint16_t *p = utf16_in; p < utf16_end;) {
      *utf8_out++ = static_cast<char>(*p++);
    }
    return;
  }

  // String contains non-ASCII characters.
  while (char_count--) {
    const uint16_t ch = *utf16_in++;
    if (ch > 0 && ch <= 0x7f) {
      *utf8_out++ = ch;
    } else {
      // Char_count == 0 here implies we've encountered an unpaired
      // surrogate and we have no choice but to encode it as 3-byte UTF
      // sequence. Note that unpaired surrogates can occur as a part of
      // "normal" operation.
      if ((ch >= 0xd800 && ch <= 0xdbff) && (char_count > 0)) {
        const uint16_t ch2 = *utf16_in;

        // Check if the other half of the pair is within the expected
        // range. If it isn't, we will have to emit both "halves" as
        // separate 3 byte sequences.
        if (ch2 >= 0xdc00 && ch2 <= 0xdfff) {
          utf16_in++;
          char_count--;
          const uint32_t code_point = (ch << 10) + ch2 - 0x035fdc00;
          *utf8_out++ = (code_point >> 18) | 0xf0;
          *utf8_out++ = ((code_point >> 12) & 0x3f) | 0x80;
          *utf8_out++ = ((code_point >> 6) & 0x3f) | 0x80;
          *utf8_out++ = (code_point & 0x3f) | 0x80;
          continue;
        }
      }

      if (ch > 0x07ff) {
        // Three byte encoding.
        *utf8_out++ = (ch >> 12) | 0xe0;
        *utf8_out++ = ((ch >> 6) & 0x3f) | 0x80;
        *utf8_out++ = (ch & 0x3f) | 0x80;
      } else /*(ch > 0x7f || ch == 0)*/ {
        // Two byte encoding.
        *utf8_out++ = (ch >> 6) | 0xc0;
        *utf8_out++ = (ch & 0x3f) | 0x80;
      }
    }
  }
}

inline size_t CountUtf8Bytes(const uint16_t* chars, size_t char_count) {
  size_t result = 0;
  const uint16_t *end = chars + char_count;
  while (chars < end) {
    const uint16_t ch = *chars++;
    if (LIKELY(ch != 0 && ch < 0x80)) {
      result++;
      continue;
    }
    if (ch < 0x800) {
      result += 2;
      continue;
    }
    if (ch >= 0xd800 && ch < 0xdc00) {
      if (chars < end) {
        const uint16_t ch2 = *chars;
        // If we find a properly paired surrogate, we emit it as a 4 byte
        // UTF sequence. If we find an unpaired leading or trailing surrogate,
        // we emit it as a 3 byte sequence like would have done earlier.
        if (ch2 >= 0xdc00 && ch2 < 0xe000) {
          chars++;
          result += 4;
          continue;
        }
      }
    }
    result += 3;
  }
  return result;
}

}  // namespace ti
}  // namespace art

#endif  // ART_TEST_TI_AGENT_TI_UTF_H_