[![Cylon.js](https://cdn.rawgit.com/hybridgroup/cylon-site/master/source/images/elements/cylon.png)](http://cylonjs.com) Cylon.js is a JavaScript framework for robotics and physical computing built on top of Node.js. It provides a simple, but powerful way to create solutions that incorporate multiple, different hardware devices concurrently. Want to use Ruby on robots? Check out our sister project, [Artoo][]. Want to use Golang to power your robots? Check out our sister project, [Gobot][]. [Artoo]: http://artoo.io [Gobot]: http://gobot.io ## Build Status: [![Build Status](https://secure.travis-ci.org/hybridgroup/cylon.png?branch=master)](http://travis-ci.org/hybridgroup/cylon) [![Code Climate](https://codeclimate.com/github/hybridgroup/cylon.png)](https://codeclimate.com/github/hybridgroup/cylon) [![Code Climate](https://codeclimate.com/github/hybridgroup/cylon/coverage.png)](https://codeclimate.com/github/hybridgroup/cylon) ## Examples ### Arduino + LED The below example connects to an Arduino over a serial connection, and blinks an LED once per second. The example requires that the Arduino have the Firmata sketch installed; which can be obtained either through the Ardunio IDE or the `cylon arduino upload firmata` command available in [cylon-cli][]. ```javascript var Cylon = require('cylon'); // define the robot var robot = Cylon.robot({ // change the port to the correct one for your Arduino connection: { name: 'arduino', adaptor: 'firmata', port: '/dev/ttyACM0' }, device: { name: 'led', driver: 'led', pin: 13 }, work: function(my) { every((1).second(), my.led.toggle); } }); // connect to the Arduino and start working robot.start(); ``` ### Parrot ARDrone 2.0 ```javascript var Cylon = require('cylon'); Cylon.robot({ connection: { name: 'ardrone', adaptor: 'ardrone', port: '192.168.1.1' }, device: { name: 'drone', driver: 'ardrone' }, work: function(my) { my.drone.takeoff(); after((10).seconds(), my.drone.land); after((15).seconds(), my.drone.stop); } }).start(); ``` ### Cat Toy (Leap Motion + Digispark + Servos) ```javascript var Cylon = require('cylon'); Cylon.robot({ connections: [ { name: 'digispark', adaptor: 'digispark'}, { name: 'leapmotion', adaptor: 'leapmotion', port: '127.0.0.1:6437' } ], devices: [ { name: 'servo1', driver: 'servo', pin: 0, connection: 'digispark' }, { name: 'servo2', driver: 'servo', pin: 1, connection: 'digispark' }, { name: 'leapmotion', driver: 'leapmotion', connection: 'leapmotion' } ], work: function(my) { my.x = 90; my.z = 90; my.leapmotion.on('hand', function(hand) { my.x = hand.palmX.fromScale(-300, 300).toScale(30, 150); my.z = hand.palmZ.fromScale(-300, 300).toScale(30, 150); }); every(100, function() { my.servo1.angle(my.x); my.servo2.angle(my.z); console.log("Current Angle: " + my.servo1.currentAngle() + ", " + my.servo2.currentAngle()); }); } }).start(); ``` ### Multiple Spheros + API Server ```javascript var Cylon = require('cylon'); // tell the API server to listen for requests at // https://localhost:4000 Cylon.api({ port: 4000 }); var bots = [ { port: '/dev/rfcomm0', name: 'Thelma' }, { port: '/dev/rfcomm1', name: 'Louise' } ]; bots.forEach(function(bot) { Cylon.robot({ name: bot.name, connection: { name: "sphero", adaptor: "sphero", port: bot.port }, device: { name: "sphero", driver: "sphero" }, work: function(my) { every((1).second(), function() { console.log(my.name); my.sphero.setRandomColor(); my.sphero.roll(60, Math.floor(Math.random() * 360)); }); } }); }); // start up all robots at once Cylon.start(); ``` ## Hardware Support Cylon.js has an extensible syntax for connecting to multiple, different hardware devices. The following 27 platforms are currently supported: - [Ardrone](http://ardrone2.parrot.com/) <==> [Adaptor/Drivers](https://github.com/hybridgroup/cylon-ardrone) - [Arduino](http://www.arduino.cc/) <==> [Adaptor](https://github.com/hybridgroup/cylon-firmata) - [Arduino YUN](http://arduino.cc/en/Main/ArduinoBoardYun?from=Products.ArduinoYUN) <==> [Adaptor](https://github.com/hybridgroup/cylon-firmata) - [AT&T M2X](https://m2x.att.com) <==> [Adaptor/Drivers](https://github.com/hybridgroup/cylon-m2x) - [Audio]() <==> [Adaptor/Driver](https://github.com/hybridgroup/cylon-audio) - [Beaglebone Black](http://beagleboard.org/Products/BeagleBone+Black/) <==> [Adaptor](https://github.com/hybridgroup/cylon-beaglebone) - [Crazyflie](http://www.bitcraze.se/) <==> [Adaptor/Driver](https://github.com/hybridgroup/cylon-crazyflie) - [Digispark](http://digistump.com/products/1) <==> [Adaptor](https://github.com/hybridgroup/cylon-digispark) - [Intel Edison](http://www.intel.com/content/www/us/en/do-it-yourself/edison.html) <==> [Adaptor](https://github.com/hybridgroup/cylon-intel-iot) - [Intel Galileo](http://www.intel.com/content/www/us/en/do-it-yourself/galileo-maker-quark-board.html) <==> [Adaptor](https://github.com/hybridgroup/cylon-intel-iot) - [Joystick](http://en.wikipedia.org/wiki/Joystick) <==> [Adaptor/Driver](https://github.com/hybridgroup/cylon-joystick) - [Keyboard](http://en.wikipedia.org/wiki/Computer_keyboard) <==> [Adaptor/Driver](https://github.com/hybridgroup/cylon-keyboard) - [Leap Motion](https://www.leapmotion.com/) <==> [Adaptor/Driver](https://github.com/hybridgroup/cylon-leapmotion) - [Nest](http://nest.com/) <==> [Adaptor/Drivers](https://github.com/hybridgroup/cylon-nest) - [Neurosky](http://store.neurosky.com/products/mindwave-mobile) <==> [Adaptor/Driver](https://github.com/hybridgroup/cylon-neurosky) - [OpenCV](http://opencv.org/) <==> [Adaptor/Drivers](https://github.com/hybridgroup/cylon-opencv) - [Phillips Hue](http://www2.meethue.com/) <==> [Adaptor/Driver](https://github.com/hybridgroup/cylon-hue) - [Pebble](http://www.getpebble.com/) <==> [Adaptor/Driver](https://github.com/hybridgroup/cylon-pebble) - [Pinoccio](https://pinocc.io) <==> [Adaptor/Driver](https://github.com/hybridgroup/cylon-pinoccio) - [Rapiro](http://www.rapiro.com/) <==> [Adaptor/Driver](https://github.com/hybridgroup/cylon-rapiro) - [Raspberry Pi](http://www.raspberrypi.org/) <==> [Adaptor](https://github.com/hybridgroup/cylon-raspi) - [Salesforce](http://www.force.com/) <==> [Adaptor/Driver](https://github.com/hybridgroup/cylon-force) - [Skynet](http://skynet.im/) <==> [Adaptor](https://github.com/hybridgroup/cylon-skynet) - [Spark](http://www.spark.io/) <==> [Adaptor](https://github.com/hybridgroup/cylon-spark) - [Speech]() <==> [Adaptor/Driver](https://github.com/hybridgroup/cylon-speech) - [Sphero](http://www.gosphero.com/) <==> [Adaptor/Driver](https://github.com/hybridgroup/cylon-sphero) - [Tessel](https://tessel.io/) <==> [Adaptor/Driver](https://github.com/hybridgroup/cylon-tessel) Our implementation of GPIO (General Purpose Input/Output) allows for a shared set of drivers supporting a number of devices: - [GPIO](https://en.wikipedia.org/wiki/General_Purpose_Input/Output) <=> [Drivers](https://github.com/hybridgroup/cylon-gpio) - Analog Sensor - Button - Continuous Servo - Direct Pin - IR Rangefinder - LED - MakeyButton - Motor - Maxbotix Ultrasonic Range Finder - Servo Additionally, we also support a number of I2C (Inter-Integrated Circuit) devices through a shared `cylon-i2c` module: - [I2C](https://en.wikipedia.org/wiki/I%C2%B2C) <=> [Drivers](https://github.com/hybridgroup/cylon-i2c) - BlinkM - BMP180 - HMC6352 Digital Compass - LCD Display - MPL115A2 Barometer/Thermometer - MPU6050 We'll also have many more platforms and drivers coming soon, [follow us on Twitter][Twitter] for updates. [Twitter]: https://twitter.com/cylonjs ## Getting Started ### Installation All you need to get started on a new robot is the `cylon` module: npm install cylon With the core module installed, now install the modules for whatever hardware support you need. For the Arduino + LED blink example, we'll need the 'firmata', 'gpio', and 'i2c' modules: npm install cylon-firmata cylon-gpio cylon-i2c ## CLI Cylon uses the Gort [http://gort.io](http://gort.io) Command Line Interface (CLI) so you can access important features right from the command line. We call it "RobotOps", aka "DevOps For Robotics". You can scan, connect, update device firmware, and more! Cylon also has its own CLI to generate new robots, adaptors, and drivers. You can check it out at [https://github.com/hybridgroup/cylon-cli](https://github.com/hybridgroup/cylon-cli). ## Documentation We're busy adding documentation to our website, check it out at [cylonjs.com/documentation][docs]. If you want to help with documentation, you can find the code for our website at on the [https://github.com/hybridgroup/cylon-site](https://github.com/hybridgroup/cylon-site). [docs]: http://cylonjs.com/documentation [docs site]: https://github.com/hybridgroup/cylon-site ## Contributing * All patches must be provided under the Apache 2.0 License * Please use the -s option in git to "sign off" that the commit is your work and you are providing it under the Apache 2.0 License * Submit a Github Pull Request to the appropriate branch and ideally discuss the changes with us in IRC. * We will look at the patch, test it out, and give you feedback. * Avoid doing minor whitespace changes, renamings, etc. along with merged content. These will be done by the maintainers from time to time but they can complicate merges and should be done seperately. * Take care to maintain the existing coding style. * Add unit tests for any new or changed functionality & lint and test your code using `make test` and `make lint`. * All pull requests should be "fast forward" * If there are commits after yours use “git rebase -i ” * If you have local changes you may need to use “git stash” * For git help see [progit](http://git-scm.com/book) which is an awesome (and free) book on git ## Release History Version 0.19.1 - Correct issue with dynamic method proxying Version 0.19.0 - Fluent syntax, improved start/halt, various other updates Version 0.18.0 - Updates Robot and Driver commands structure Version 0.17.0 - Updates to API to match CPPP-IO spec Version 0.16.0 - New IO Utils, removal of Utils#bind, add Adaptor#_noop method. Version 0.15.1 - Fixed issue with the API on Tessel Version 0.15.0 - Better halting, cleaner startup, removed 'connect' and 'start' events, and misc other cleanups/refactors. Version 0.14.0 - Removal of node-namespace and misc. cleanup Version 0.13.3 - Fixes bug with disconnect functions not being called. Version 0.13.2 - Use pure Express, adds server-sent-events, upd API. Version 0.13.1 - Add API authentication and HTTPS support Version 0.13.0 - Set minimum Node version to 0.10.20, add utils to global namespace and improve initialization routines Version 0.12.0 - Extraction of CLI tooling Version 0.11.2 - bugfixes Version 0.11.0 - Refactor into pure JavaScript Version 0.10.4 - Add JS helper functions Version 0.10.3 - Fix dependency issue Version 0.10.2 - Create connections convenience vars, refactor config loading Version 0.10.1 - Updates required for test driven robotics, update Robeaux version, bugfixes Version 0.10.0 - Use Robeaux UX, add CLI commands for helping connect to devices, bugfixes Version 0.9.0 - Add AngularJS web interface to API, extensible commands for CLI Version 0.8.0 - Refactored Adaptor and Driver into proper base classes for easier authoring of new modules Version 0.7.0 - cylon command for generating new adaptors, support code for better GPIO support, literate examples Version 0.6.0 - API exposes robot commands, fixes issues in driver/adaptor init Version 0.5.0 - Improve API, add GPIO support for reuse in adaptors Version 0.4.0 - Refactor proxy in Cylon.Basestar, improve API Version 0.3.0 - Improved Cylon.Basestar, and added API Version 0.2.0 - Cylon.Basestar to help develop external adaptors/drivers Version 0.1.0 - Initial release for ongoing development ## License Copyright (c) 2013-2014 The Hybrid Group. Licensed under the Apache 2.0 license.