linux_old1/tools/perf/builtin-test.c

1227 lines
28 KiB
C
Raw Normal View History

perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
/*
* builtin-test.c
*
* Builtin regression testing command: ever growing number of sanity tests
*/
#include "builtin.h"
#include "util/cache.h"
#include "util/debug.h"
#include "util/debugfs.h"
#include "util/evlist.h"
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
#include "util/parse-options.h"
#include "util/parse-events.h"
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
#include "util/symbol.h"
#include "util/thread_map.h"
#include "util/pmu.h"
#include "../../include/linux/hw_breakpoint.h"
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
#include <sys/mman.h>
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
static int vmlinux_matches_kallsyms_filter(struct map *map __used, struct symbol *sym)
{
bool *visited = symbol__priv(sym);
*visited = true;
return 0;
}
static int test__vmlinux_matches_kallsyms(void)
{
int err = -1;
struct rb_node *nd;
struct symbol *sym;
struct map *kallsyms_map, *vmlinux_map;
struct machine kallsyms, vmlinux;
enum map_type type = MAP__FUNCTION;
long page_size = sysconf(_SC_PAGE_SIZE);
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
struct ref_reloc_sym ref_reloc_sym = { .name = "_stext", };
/*
* Step 1:
*
* Init the machines that will hold kernel, modules obtained from
* both vmlinux + .ko files and from /proc/kallsyms split by modules.
*/
machine__init(&kallsyms, "", HOST_KERNEL_ID);
machine__init(&vmlinux, "", HOST_KERNEL_ID);
/*
* Step 2:
*
* Create the kernel maps for kallsyms and the DSO where we will then
* load /proc/kallsyms. Also create the modules maps from /proc/modules
* and find the .ko files that match them in /lib/modules/`uname -r`/.
*/
if (machine__create_kernel_maps(&kallsyms) < 0) {
pr_debug("machine__create_kernel_maps ");
return -1;
}
/*
* Step 3:
*
* Load and split /proc/kallsyms into multiple maps, one per module.
*/
if (machine__load_kallsyms(&kallsyms, "/proc/kallsyms", type, NULL) <= 0) {
pr_debug("dso__load_kallsyms ");
goto out;
}
/*
* Step 4:
*
* kallsyms will be internally on demand sorted by name so that we can
* find the reference relocation * symbol, i.e. the symbol we will use
* to see if the running kernel was relocated by checking if it has the
* same value in the vmlinux file we load.
*/
kallsyms_map = machine__kernel_map(&kallsyms, type);
sym = map__find_symbol_by_name(kallsyms_map, ref_reloc_sym.name, NULL);
if (sym == NULL) {
pr_debug("dso__find_symbol_by_name ");
goto out;
}
ref_reloc_sym.addr = sym->start;
/*
* Step 5:
*
* Now repeat step 2, this time for the vmlinux file we'll auto-locate.
*/
if (machine__create_kernel_maps(&vmlinux) < 0) {
pr_debug("machine__create_kernel_maps ");
goto out;
}
vmlinux_map = machine__kernel_map(&vmlinux, type);
map__kmap(vmlinux_map)->ref_reloc_sym = &ref_reloc_sym;
/*
* Step 6:
*
* Locate a vmlinux file in the vmlinux path that has a buildid that
* matches the one of the running kernel.
*
* While doing that look if we find the ref reloc symbol, if we find it
* we'll have its ref_reloc_symbol.unrelocated_addr and then
* maps__reloc_vmlinux will notice and set proper ->[un]map_ip routines
* to fixup the symbols.
*/
if (machine__load_vmlinux_path(&vmlinux, type,
vmlinux_matches_kallsyms_filter) <= 0) {
pr_debug("machine__load_vmlinux_path ");
goto out;
}
err = 0;
/*
* Step 7:
*
* Now look at the symbols in the vmlinux DSO and check if we find all of them
* in the kallsyms dso. For the ones that are in both, check its names and
* end addresses too.
*/
for (nd = rb_first(&vmlinux_map->dso->symbols[type]); nd; nd = rb_next(nd)) {
perf test: Look forward for symbol aliases Not just before, fixing these false positives: [acme@mica linux]$ perf test -v 1 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (6 entries long) Using //lib/modules/2.6.37-rc5-00180-ge06b6bf/build/vmlinux for symbols 0xffffffff81058dc0: diff name v: sys_vm86old k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_vm86 k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_subpage_prot k: sys_ni_syscall 0xffffffff810b5f7c: diff name v: probe_kernel_write k: __probe_kernel_write 0xffffffff810b5fe5: diff name v: probe_kernel_read k: __probe_kernel_read 0xffffffff811bc380: diff name v: __memset k: memset 0xffffffff81384a98: diff name v: __sched_text_start k: sleep_on_common 0xffffffff81386750: diff name v: __sched_text_end k: _raw_spin_trylock 0xffffffff8138cee8: diff name v: __irqentry_text_start k: do_IRQ 0xffffffff8138f079: diff name v: __start_notes k: _etext 0xffffffff8138f079: diff name v: __stop_notes k: _etext ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@mica linux]$ Some are weak functions, others are just markers, etc. They get in the rb tree with the same addr, so we need to look around to find the symbol with the same name. We were looking just at the previous entries with the same addr, look forward too. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Han Pingtian <phan@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-22 09:38:37 +08:00
struct symbol *pair, *first_pair;
bool backwards = true;
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
sym = rb_entry(nd, struct symbol, rb_node);
perf test: Look forward for symbol aliases Not just before, fixing these false positives: [acme@mica linux]$ perf test -v 1 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (6 entries long) Using //lib/modules/2.6.37-rc5-00180-ge06b6bf/build/vmlinux for symbols 0xffffffff81058dc0: diff name v: sys_vm86old k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_vm86 k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_subpage_prot k: sys_ni_syscall 0xffffffff810b5f7c: diff name v: probe_kernel_write k: __probe_kernel_write 0xffffffff810b5fe5: diff name v: probe_kernel_read k: __probe_kernel_read 0xffffffff811bc380: diff name v: __memset k: memset 0xffffffff81384a98: diff name v: __sched_text_start k: sleep_on_common 0xffffffff81386750: diff name v: __sched_text_end k: _raw_spin_trylock 0xffffffff8138cee8: diff name v: __irqentry_text_start k: do_IRQ 0xffffffff8138f079: diff name v: __start_notes k: _etext 0xffffffff8138f079: diff name v: __stop_notes k: _etext ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@mica linux]$ Some are weak functions, others are just markers, etc. They get in the rb tree with the same addr, so we need to look around to find the symbol with the same name. We were looking just at the previous entries with the same addr, look forward too. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Han Pingtian <phan@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-22 09:38:37 +08:00
if (sym->start == sym->end)
continue;
first_pair = machine__find_kernel_symbol(&kallsyms, type, sym->start, NULL, NULL);
pair = first_pair;
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
if (pair && pair->start == sym->start) {
next_pair:
if (strcmp(sym->name, pair->name) == 0) {
/*
* kallsyms don't have the symbol end, so we
* set that by using the next symbol start - 1,
* in some cases we get this up to a page
* wrong, trace_kmalloc when I was developing
* this code was one such example, 2106 bytes
* off the real size. More than that and we
* _really_ have a problem.
*/
s64 skew = sym->end - pair->end;
if (llabs(skew) < page_size)
continue;
pr_debug("%#" PRIx64 ": diff end addr for %s v: %#" PRIx64 " k: %#" PRIx64 "\n",
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
sym->start, sym->name, sym->end, pair->end);
} else {
perf test: Look forward for symbol aliases Not just before, fixing these false positives: [acme@mica linux]$ perf test -v 1 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (6 entries long) Using //lib/modules/2.6.37-rc5-00180-ge06b6bf/build/vmlinux for symbols 0xffffffff81058dc0: diff name v: sys_vm86old k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_vm86 k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_subpage_prot k: sys_ni_syscall 0xffffffff810b5f7c: diff name v: probe_kernel_write k: __probe_kernel_write 0xffffffff810b5fe5: diff name v: probe_kernel_read k: __probe_kernel_read 0xffffffff811bc380: diff name v: __memset k: memset 0xffffffff81384a98: diff name v: __sched_text_start k: sleep_on_common 0xffffffff81386750: diff name v: __sched_text_end k: _raw_spin_trylock 0xffffffff8138cee8: diff name v: __irqentry_text_start k: do_IRQ 0xffffffff8138f079: diff name v: __start_notes k: _etext 0xffffffff8138f079: diff name v: __stop_notes k: _etext ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@mica linux]$ Some are weak functions, others are just markers, etc. They get in the rb tree with the same addr, so we need to look around to find the symbol with the same name. We were looking just at the previous entries with the same addr, look forward too. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Han Pingtian <phan@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-22 09:38:37 +08:00
struct rb_node *nnd;
detour:
nnd = backwards ? rb_prev(&pair->rb_node) :
rb_next(&pair->rb_node);
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
if (nnd) {
struct symbol *next = rb_entry(nnd, struct symbol, rb_node);
if (next->start == sym->start) {
pair = next;
goto next_pair;
}
}
perf test: Look forward for symbol aliases Not just before, fixing these false positives: [acme@mica linux]$ perf test -v 1 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (6 entries long) Using //lib/modules/2.6.37-rc5-00180-ge06b6bf/build/vmlinux for symbols 0xffffffff81058dc0: diff name v: sys_vm86old k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_vm86 k: sys_ni_syscall 0xffffffff81058dc0: diff name v: sys_subpage_prot k: sys_ni_syscall 0xffffffff810b5f7c: diff name v: probe_kernel_write k: __probe_kernel_write 0xffffffff810b5fe5: diff name v: probe_kernel_read k: __probe_kernel_read 0xffffffff811bc380: diff name v: __memset k: memset 0xffffffff81384a98: diff name v: __sched_text_start k: sleep_on_common 0xffffffff81386750: diff name v: __sched_text_end k: _raw_spin_trylock 0xffffffff8138cee8: diff name v: __irqentry_text_start k: do_IRQ 0xffffffff8138f079: diff name v: __start_notes k: _etext 0xffffffff8138f079: diff name v: __stop_notes k: _etext ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@mica linux]$ Some are weak functions, others are just markers, etc. They get in the rb tree with the same addr, so we need to look around to find the symbol with the same name. We were looking just at the previous entries with the same addr, look forward too. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Han Pingtian <phan@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-22 09:38:37 +08:00
if (backwards) {
backwards = false;
pair = first_pair;
goto detour;
}
pr_debug("%#" PRIx64 ": diff name v: %s k: %s\n",
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
sym->start, sym->name, pair->name);
}
} else
pr_debug("%#" PRIx64 ": %s not on kallsyms\n", sym->start, sym->name);
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
err = -1;
}
if (!verbose)
goto out;
pr_info("Maps only in vmlinux:\n");
for (nd = rb_first(&vmlinux.kmaps.maps[type]); nd; nd = rb_next(nd)) {
struct map *pos = rb_entry(nd, struct map, rb_node), *pair;
/*
* If it is the kernel, kallsyms is always "[kernel.kallsyms]", while
* the kernel will have the path for the vmlinux file being used,
* so use the short name, less descriptive but the same ("[kernel]" in
* both cases.
*/
pair = map_groups__find_by_name(&kallsyms.kmaps, type,
(pos->dso->kernel ?
pos->dso->short_name :
pos->dso->name));
if (pair)
pair->priv = 1;
else
map__fprintf(pos, stderr);
}
pr_info("Maps in vmlinux with a different name in kallsyms:\n");
for (nd = rb_first(&vmlinux.kmaps.maps[type]); nd; nd = rb_next(nd)) {
struct map *pos = rb_entry(nd, struct map, rb_node), *pair;
pair = map_groups__find(&kallsyms.kmaps, type, pos->start);
if (pair == NULL || pair->priv)
continue;
if (pair->start == pos->start) {
pair->priv = 1;
pr_info(" %" PRIx64 "-%" PRIx64 " %" PRIx64 " %s in kallsyms as",
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
pos->start, pos->end, pos->pgoff, pos->dso->name);
if (pos->pgoff != pair->pgoff || pos->end != pair->end)
pr_info(": \n*%" PRIx64 "-%" PRIx64 " %" PRIx64 "",
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
pair->start, pair->end, pair->pgoff);
pr_info(" %s\n", pair->dso->name);
pair->priv = 1;
}
}
pr_info("Maps only in kallsyms:\n");
for (nd = rb_first(&kallsyms.kmaps.maps[type]);
nd; nd = rb_next(nd)) {
struct map *pos = rb_entry(nd, struct map, rb_node);
if (!pos->priv)
map__fprintf(pos, stderr);
}
out:
return err;
}
#include "util/cpumap.h"
#include "util/evsel.h"
#include <sys/types.h>
static int trace_event__id(const char *evname)
{
char *filename;
int err = -1, fd;
if (asprintf(&filename,
"%s/syscalls/%s/id",
tracing_events_path, evname) < 0)
return -1;
fd = open(filename, O_RDONLY);
if (fd >= 0) {
char id[16];
if (read(fd, id, sizeof(id)) > 0)
err = atoi(id);
close(fd);
}
free(filename);
return err;
}
static int test__open_syscall_event(void)
{
int err = -1, fd;
struct thread_map *threads;
struct perf_evsel *evsel;
struct perf_event_attr attr;
unsigned int nr_open_calls = 111, i;
int id = trace_event__id("sys_enter_open");
if (id < 0) {
pr_debug("is debugfs mounted on /sys/kernel/debug?\n");
return -1;
}
threads = thread_map__new(-1, getpid(), UINT_MAX);
if (threads == NULL) {
pr_debug("thread_map__new\n");
return -1;
}
memset(&attr, 0, sizeof(attr));
attr.type = PERF_TYPE_TRACEPOINT;
attr.config = id;
evsel = perf_evsel__new(&attr, 0);
if (evsel == NULL) {
pr_debug("perf_evsel__new\n");
goto out_thread_map_delete;
}
if (perf_evsel__open_per_thread(evsel, threads, false, NULL) < 0) {
pr_debug("failed to open counter: %s, "
"tweak /proc/sys/kernel/perf_event_paranoid?\n",
strerror(errno));
goto out_evsel_delete;
}
for (i = 0; i < nr_open_calls; ++i) {
fd = open("/etc/passwd", O_RDONLY);
close(fd);
}
if (perf_evsel__read_on_cpu(evsel, 0, 0) < 0) {
pr_debug("perf_evsel__read_on_cpu\n");
goto out_close_fd;
}
if (evsel->counts->cpu[0].val != nr_open_calls) {
pr_debug("perf_evsel__read_on_cpu: expected to intercept %d calls, got %" PRIu64 "\n",
nr_open_calls, evsel->counts->cpu[0].val);
goto out_close_fd;
}
err = 0;
out_close_fd:
perf_evsel__close_fd(evsel, 1, threads->nr);
out_evsel_delete:
perf_evsel__delete(evsel);
out_thread_map_delete:
thread_map__delete(threads);
return err;
}
#include <sched.h>
static int test__open_syscall_event_on_all_cpus(void)
{
int err = -1, fd, cpu;
struct thread_map *threads;
struct cpu_map *cpus;
struct perf_evsel *evsel;
struct perf_event_attr attr;
unsigned int nr_open_calls = 111, i;
cpu_set_t cpu_set;
int id = trace_event__id("sys_enter_open");
if (id < 0) {
pr_debug("is debugfs mounted on /sys/kernel/debug?\n");
return -1;
}
threads = thread_map__new(-1, getpid(), UINT_MAX);
if (threads == NULL) {
pr_debug("thread_map__new\n");
return -1;
}
cpus = cpu_map__new(NULL);
if (cpus == NULL) {
pr_debug("cpu_map__new\n");
goto out_thread_map_delete;
}
CPU_ZERO(&cpu_set);
memset(&attr, 0, sizeof(attr));
attr.type = PERF_TYPE_TRACEPOINT;
attr.config = id;
evsel = perf_evsel__new(&attr, 0);
if (evsel == NULL) {
pr_debug("perf_evsel__new\n");
goto out_thread_map_delete;
}
if (perf_evsel__open(evsel, cpus, threads, false, NULL) < 0) {
pr_debug("failed to open counter: %s, "
"tweak /proc/sys/kernel/perf_event_paranoid?\n",
strerror(errno));
goto out_evsel_delete;
}
for (cpu = 0; cpu < cpus->nr; ++cpu) {
unsigned int ncalls = nr_open_calls + cpu;
/*
* XXX eventually lift this restriction in a way that
* keeps perf building on older glibc installations
* without CPU_ALLOC. 1024 cpus in 2010 still seems
* a reasonable upper limit tho :-)
*/
if (cpus->map[cpu] >= CPU_SETSIZE) {
pr_debug("Ignoring CPU %d\n", cpus->map[cpu]);
continue;
}
CPU_SET(cpus->map[cpu], &cpu_set);
if (sched_setaffinity(0, sizeof(cpu_set), &cpu_set) < 0) {
pr_debug("sched_setaffinity() failed on CPU %d: %s ",
cpus->map[cpu],
strerror(errno));
goto out_close_fd;
}
for (i = 0; i < ncalls; ++i) {
fd = open("/etc/passwd", O_RDONLY);
close(fd);
}
CPU_CLR(cpus->map[cpu], &cpu_set);
}
/*
* Here we need to explicitely preallocate the counts, as if
* we use the auto allocation it will allocate just for 1 cpu,
* as we start by cpu 0.
*/
if (perf_evsel__alloc_counts(evsel, cpus->nr) < 0) {
pr_debug("perf_evsel__alloc_counts(ncpus=%d)\n", cpus->nr);
goto out_close_fd;
}
err = 0;
for (cpu = 0; cpu < cpus->nr; ++cpu) {
unsigned int expected;
if (cpus->map[cpu] >= CPU_SETSIZE)
continue;
if (perf_evsel__read_on_cpu(evsel, cpu, 0) < 0) {
pr_debug("perf_evsel__read_on_cpu\n");
err = -1;
break;
}
expected = nr_open_calls + cpu;
if (evsel->counts->cpu[cpu].val != expected) {
pr_debug("perf_evsel__read_on_cpu: expected to intercept %d calls on cpu %d, got %" PRIu64 "\n",
expected, cpus->map[cpu], evsel->counts->cpu[cpu].val);
err = -1;
}
}
out_close_fd:
perf_evsel__close_fd(evsel, 1, threads->nr);
out_evsel_delete:
perf_evsel__delete(evsel);
out_thread_map_delete:
thread_map__delete(threads);
return err;
}
/*
* This test will generate random numbers of calls to some getpid syscalls,
* then establish an mmap for a group of events that are created to monitor
* the syscalls.
*
* It will receive the events, using mmap, use its PERF_SAMPLE_ID generated
* sample.id field to map back to its respective perf_evsel instance.
*
* Then it checks if the number of syscalls reported as perf events by
* the kernel corresponds to the number of syscalls made.
*/
static int test__basic_mmap(void)
{
int err = -1;
union perf_event *event;
struct thread_map *threads;
struct cpu_map *cpus;
struct perf_evlist *evlist;
struct perf_event_attr attr = {
.type = PERF_TYPE_TRACEPOINT,
.read_format = PERF_FORMAT_ID,
.sample_type = PERF_SAMPLE_ID,
.watermark = 0,
};
cpu_set_t cpu_set;
const char *syscall_names[] = { "getsid", "getppid", "getpgrp",
"getpgid", };
pid_t (*syscalls[])(void) = { (void *)getsid, getppid, getpgrp,
(void*)getpgid };
#define nsyscalls ARRAY_SIZE(syscall_names)
int ids[nsyscalls];
unsigned int nr_events[nsyscalls],
expected_nr_events[nsyscalls], i, j;
struct perf_evsel *evsels[nsyscalls], *evsel;
for (i = 0; i < nsyscalls; ++i) {
char name[64];
snprintf(name, sizeof(name), "sys_enter_%s", syscall_names[i]);
ids[i] = trace_event__id(name);
if (ids[i] < 0) {
pr_debug("Is debugfs mounted on /sys/kernel/debug?\n");
return -1;
}
nr_events[i] = 0;
expected_nr_events[i] = random() % 257;
}
threads = thread_map__new(-1, getpid(), UINT_MAX);
if (threads == NULL) {
pr_debug("thread_map__new\n");
return -1;
}
cpus = cpu_map__new(NULL);
if (cpus == NULL) {
pr_debug("cpu_map__new\n");
goto out_free_threads;
}
CPU_ZERO(&cpu_set);
CPU_SET(cpus->map[0], &cpu_set);
sched_setaffinity(0, sizeof(cpu_set), &cpu_set);
if (sched_setaffinity(0, sizeof(cpu_set), &cpu_set) < 0) {
pr_debug("sched_setaffinity() failed on CPU %d: %s ",
cpus->map[0], strerror(errno));
goto out_free_cpus;
}
evlist = perf_evlist__new(cpus, threads);
if (evlist == NULL) {
pr_debug("perf_evlist__new\n");
goto out_free_cpus;
}
/* anonymous union fields, can't be initialized above */
attr.wakeup_events = 1;
attr.sample_period = 1;
for (i = 0; i < nsyscalls; ++i) {
attr.config = ids[i];
evsels[i] = perf_evsel__new(&attr, i);
if (evsels[i] == NULL) {
pr_debug("perf_evsel__new\n");
goto out_free_evlist;
}
perf_evlist__add(evlist, evsels[i]);
if (perf_evsel__open(evsels[i], cpus, threads, false, NULL) < 0) {
pr_debug("failed to open counter: %s, "
"tweak /proc/sys/kernel/perf_event_paranoid?\n",
strerror(errno));
goto out_close_fd;
}
}
if (perf_evlist__mmap(evlist, 128, true) < 0) {
pr_debug("failed to mmap events: %d (%s)\n", errno,
strerror(errno));
goto out_close_fd;
}
for (i = 0; i < nsyscalls; ++i)
for (j = 0; j < expected_nr_events[i]; ++j) {
int foo = syscalls[i]();
++foo;
}
perf evlist: Fix per thread mmap setup The PERF_EVENT_IOC_SET_OUTPUT ioctl was returning -EINVAL when using --pid when monitoring multithreaded apps, as we can only share a ring buffer for events on the same thread if not doing per cpu. Fix it by using per thread ring buffers. Tested with: [root@felicio ~]# tuna -t 26131 -CP | nl 1 thread ctxt_switches 2 pid SCHED_ rtpri affinity voluntary nonvoluntary cmd 3 26131 OTHER 0 0,1 10814276 2397830 chromium-browse 4 642 OTHER 0 0,1 14688 0 chromium-browse 5 26148 OTHER 0 0,1 713602 115479 chromium-browse 6 26149 OTHER 0 0,1 801958 2262 chromium-browse 7 26150 OTHER 0 0,1 1271128 248 chromium-browse 8 26151 OTHER 0 0,1 3 0 chromium-browse 9 27049 OTHER 0 0,1 36796 9 chromium-browse 10 618 OTHER 0 0,1 14711 0 chromium-browse 11 661 OTHER 0 0,1 14593 0 chromium-browse 12 29048 OTHER 0 0,1 28125 0 chromium-browse 13 26143 OTHER 0 0,1 2202789 781 chromium-browse [root@felicio ~]# So 11 threads under pid 26131, then: [root@felicio ~]# perf record -F 50000 --pid 26131 [root@felicio ~]# grep perf_event /proc/`pidof perf`/maps | nl 1 7fa4a2538000-7fa4a25b9000 rwxs 00000000 00:09 4064 anon_inode:[perf_event] 2 7fa4a25b9000-7fa4a263a000 rwxs 00000000 00:09 4064 anon_inode:[perf_event] 3 7fa4a263a000-7fa4a26bb000 rwxs 00000000 00:09 4064 anon_inode:[perf_event] 4 7fa4a26bb000-7fa4a273c000 rwxs 00000000 00:09 4064 anon_inode:[perf_event] 5 7fa4a273c000-7fa4a27bd000 rwxs 00000000 00:09 4064 anon_inode:[perf_event] 6 7fa4a27bd000-7fa4a283e000 rwxs 00000000 00:09 4064 anon_inode:[perf_event] 7 7fa4a283e000-7fa4a28bf000 rwxs 00000000 00:09 4064 anon_inode:[perf_event] 8 7fa4a28bf000-7fa4a2940000 rwxs 00000000 00:09 4064 anon_inode:[perf_event] 9 7fa4a2940000-7fa4a29c1000 rwxs 00000000 00:09 4064 anon_inode:[perf_event] 10 7fa4a29c1000-7fa4a2a42000 rwxs 00000000 00:09 4064 anon_inode:[perf_event] 11 7fa4a2a42000-7fa4a2ac3000 rwxs 00000000 00:09 4064 anon_inode:[perf_event] [root@felicio ~]# 11 mmaps, one per thread since we didn't specify any CPU list, so we need one mmap per thread and: [root@felicio ~]# perf record -F 50000 --pid 26131 ^M ^C[ perf record: Woken up 79 times to write data ] [ perf record: Captured and wrote 20.614 MB perf.data (~900639 samples) ] [root@felicio ~]# perf report -D | grep PERF_RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort -n | uniq -c | sort -nr | nl 1 371310 26131 2 96516 26148 3 95694 26149 4 95203 26150 5 7291 26143 6 87 27049 7 76 661 8 60 29048 9 47 618 10 43 642 [root@felicio ~]# Ok, one of the threads, 26151 was quiescent, so no samples there, but all the others are there. Then, if I specify one CPU: [root@felicio ~]# perf record -F 50000 --pid 26131 --cpu 1 ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.680 MB perf.data (~29730 samples) ] [root@felicio ~]# perf report -D | grep PERF_RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort -n | uniq -c | sort -nr | nl 1 8444 26131 2 2584 26149 3 2518 26148 4 2324 26150 5 123 26143 6 9 661 7 9 29048 [root@felicio ~]# This machine has two cores, so fewer threads appeared on the radar, and: [root@felicio ~]# grep perf_event /proc/`pidof perf`/maps | nl 1 7f484b922000-7f484b9a3000 rwxs 00000000 00:09 4064 anon_inode:[perf_event] [root@felicio ~]# Just one mmap, as now we can use just one per-cpu buffer instead of the per-thread needed in the previous case. For global profiling: [root@felicio ~]# perf record -F 50000 -a ^C[ perf record: Woken up 26 times to write data ] [ perf record: Captured and wrote 7.128 MB perf.data (~311412 samples) ] [root@felicio ~]# grep perf_event /proc/`pidof perf`/maps | nl 1 7fb49b435000-7fb49b4b6000 rwxs 00000000 00:09 4064 anon_inode:[perf_event] 2 7fb49b4b6000-7fb49b537000 rwxs 00000000 00:09 4064 anon_inode:[perf_event] [root@felicio ~]# It uses per-cpu buffers. For just one thread: [root@felicio ~]# perf record -F 50000 --tid 26148 ^C[ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.330 MB perf.data (~14426 samples) ] [root@felicio ~]# perf report -D | grep PERF_RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort -n | uniq -c | sort -nr | nl 1 9969 26148 [root@felicio ~]# [root@felicio ~]# grep perf_event /proc/`pidof perf`/maps | nl 1 7f286a51b000-7f286a59c000 rwxs 00000000 00:09 4064 anon_inode:[perf_event] [root@felicio ~]# Tested-by: David Ahern <dsahern@gmail.com> Tested-by: Lin Ming <ming.m.lin@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/r/20110426204401.GB1746@ghostprotocols.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-15 20:39:00 +08:00
while ((event = perf_evlist__mmap_read(evlist, 0)) != NULL) {
struct perf_sample sample;
if (event->header.type != PERF_RECORD_SAMPLE) {
pr_debug("unexpected %s event\n",
perf_event__name(event->header.type));
goto out_munmap;
}
err = perf_evlist__parse_sample(evlist, event, &sample, false);
if (err) {
pr_err("Can't parse sample, err = %d\n", err);
goto out_munmap;
}
evsel = perf_evlist__id2evsel(evlist, sample.id);
if (evsel == NULL) {
pr_debug("event with id %" PRIu64
" doesn't map to an evsel\n", sample.id);
goto out_munmap;
}
nr_events[evsel->idx]++;
}
list_for_each_entry(evsel, &evlist->entries, node) {
if (nr_events[evsel->idx] != expected_nr_events[evsel->idx]) {
pr_debug("expected %d %s events, got %d\n",
expected_nr_events[evsel->idx],
perf_evsel__name(evsel), nr_events[evsel->idx]);
goto out_munmap;
}
}
err = 0;
out_munmap:
perf_evlist__munmap(evlist);
out_close_fd:
for (i = 0; i < nsyscalls; ++i)
perf_evsel__close_fd(evsels[i], 1, threads->nr);
out_free_evlist:
perf_evlist__delete(evlist);
out_free_cpus:
cpu_map__delete(cpus);
out_free_threads:
thread_map__delete(threads);
return err;
#undef nsyscalls
}
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
static int sched__get_first_possible_cpu(pid_t pid, cpu_set_t **maskp,
size_t *sizep)
{
cpu_set_t *mask;
size_t size;
int i, cpu = -1, nrcpus = 1024;
realloc:
mask = CPU_ALLOC(nrcpus);
size = CPU_ALLOC_SIZE(nrcpus);
CPU_ZERO_S(size, mask);
if (sched_getaffinity(pid, size, mask) == -1) {
CPU_FREE(mask);
if (errno == EINVAL && nrcpus < (1024 << 8)) {
nrcpus = nrcpus << 2;
goto realloc;
}
perror("sched_getaffinity");
return -1;
}
for (i = 0; i < nrcpus; i++) {
if (CPU_ISSET_S(i, size, mask)) {
if (cpu == -1) {
cpu = i;
*maskp = mask;
*sizep = size;
} else
CPU_CLR_S(i, size, mask);
}
}
if (cpu == -1)
CPU_FREE(mask);
return cpu;
}
static int test__PERF_RECORD(void)
{
struct perf_record_opts opts = {
.target = {
.uid = UINT_MAX,
.uses_mmap = true,
},
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
.no_delay = true,
.freq = 10,
.mmap_pages = 256,
};
cpu_set_t *cpu_mask = NULL;
size_t cpu_mask_size = 0;
struct perf_evlist *evlist = perf_evlist__new(NULL, NULL);
struct perf_evsel *evsel;
struct perf_sample sample;
const char *cmd = "sleep";
const char *argv[] = { cmd, "1", NULL, };
char *bname;
u64 prev_time = 0;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
bool found_cmd_mmap = false,
found_libc_mmap = false,
found_vdso_mmap = false,
found_ld_mmap = false;
int err = -1, errs = 0, i, wakeups = 0;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
u32 cpu;
int total_events = 0, nr_events[PERF_RECORD_MAX] = { 0, };
if (evlist == NULL || argv == NULL) {
pr_debug("Not enough memory to create evlist\n");
goto out;
}
/*
* We need at least one evsel in the evlist, use the default
* one: "cycles".
*/
err = perf_evlist__add_default(evlist);
if (err < 0) {
pr_debug("Not enough memory to create evsel\n");
goto out_delete_evlist;
}
/*
* Create maps of threads and cpus to monitor. In this case
* we start with all threads and cpus (-1, -1) but then in
* perf_evlist__prepare_workload we'll fill in the only thread
* we're monitoring, the one forked there.
*/
err = perf_evlist__create_maps(evlist, &opts.target);
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
if (err < 0) {
pr_debug("Not enough memory to create thread/cpu maps\n");
goto out_delete_evlist;
}
/*
* Prepare the workload in argv[] to run, it'll fork it, and then wait
* for perf_evlist__start_workload() to exec it. This is done this way
* so that we have time to open the evlist (calling sys_perf_event_open
* on all the fds) and then mmap them.
*/
err = perf_evlist__prepare_workload(evlist, &opts, argv);
if (err < 0) {
pr_debug("Couldn't run the workload!\n");
goto out_delete_evlist;
}
/*
* Config the evsels, setting attr->comm on the first one, etc.
*/
evsel = list_entry(evlist->entries.next, struct perf_evsel, node);
evsel->attr.sample_type |= PERF_SAMPLE_CPU;
evsel->attr.sample_type |= PERF_SAMPLE_TID;
evsel->attr.sample_type |= PERF_SAMPLE_TIME;
perf_evlist__config_attrs(evlist, &opts);
err = sched__get_first_possible_cpu(evlist->workload.pid, &cpu_mask,
&cpu_mask_size);
if (err < 0) {
pr_debug("sched__get_first_possible_cpu: %s\n", strerror(errno));
goto out_delete_evlist;
}
cpu = err;
/*
* So that we can check perf_sample.cpu on all the samples.
*/
if (sched_setaffinity(evlist->workload.pid, cpu_mask_size, cpu_mask) < 0) {
pr_debug("sched_setaffinity: %s\n", strerror(errno));
goto out_free_cpu_mask;
}
/*
* Call sys_perf_event_open on all the fds on all the evsels,
* grouping them if asked to.
*/
err = perf_evlist__open(evlist, opts.group);
if (err < 0) {
pr_debug("perf_evlist__open: %s\n", strerror(errno));
goto out_delete_evlist;
}
/*
* mmap the first fd on a given CPU and ask for events for the other
* fds in the same CPU to be injected in the same mmap ring buffer
* (using ioctl(PERF_EVENT_IOC_SET_OUTPUT)).
*/
err = perf_evlist__mmap(evlist, opts.mmap_pages, false);
if (err < 0) {
pr_debug("perf_evlist__mmap: %s\n", strerror(errno));
goto out_delete_evlist;
}
/*
* Now that all is properly set up, enable the events, they will
* count just on workload.pid, which will start...
*/
perf_evlist__enable(evlist);
/*
* Now!
*/
perf_evlist__start_workload(evlist);
while (1) {
int before = total_events;
for (i = 0; i < evlist->nr_mmaps; i++) {
union perf_event *event;
while ((event = perf_evlist__mmap_read(evlist, i)) != NULL) {
const u32 type = event->header.type;
const char *name = perf_event__name(type);
++total_events;
if (type < PERF_RECORD_MAX)
nr_events[type]++;
err = perf_evlist__parse_sample(evlist, event, &sample, false);
if (err < 0) {
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
if (verbose)
perf_event__fprintf(event, stderr);
pr_debug("Couldn't parse sample\n");
goto out_err;
}
if (verbose) {
pr_info("%" PRIu64" %d ", sample.time, sample.cpu);
perf_event__fprintf(event, stderr);
}
if (prev_time > sample.time) {
pr_debug("%s going backwards in time, prev=%" PRIu64 ", curr=%" PRIu64 "\n",
name, prev_time, sample.time);
++errs;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
prev_time = sample.time;
if (sample.cpu != cpu) {
pr_debug("%s with unexpected cpu, expected %d, got %d\n",
name, cpu, sample.cpu);
++errs;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
if ((pid_t)sample.pid != evlist->workload.pid) {
pr_debug("%s with unexpected pid, expected %d, got %d\n",
name, evlist->workload.pid, sample.pid);
++errs;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
if ((pid_t)sample.tid != evlist->workload.pid) {
pr_debug("%s with unexpected tid, expected %d, got %d\n",
name, evlist->workload.pid, sample.tid);
++errs;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
if ((type == PERF_RECORD_COMM ||
type == PERF_RECORD_MMAP ||
type == PERF_RECORD_FORK ||
type == PERF_RECORD_EXIT) &&
(pid_t)event->comm.pid != evlist->workload.pid) {
pr_debug("%s with unexpected pid/tid\n", name);
++errs;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
if ((type == PERF_RECORD_COMM ||
type == PERF_RECORD_MMAP) &&
event->comm.pid != event->comm.tid) {
pr_debug("%s with different pid/tid!\n", name);
++errs;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
switch (type) {
case PERF_RECORD_COMM:
if (strcmp(event->comm.comm, cmd)) {
pr_debug("%s with unexpected comm!\n", name);
++errs;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
break;
case PERF_RECORD_EXIT:
goto found_exit;
case PERF_RECORD_MMAP:
bname = strrchr(event->mmap.filename, '/');
if (bname != NULL) {
if (!found_cmd_mmap)
found_cmd_mmap = !strcmp(bname + 1, cmd);
if (!found_libc_mmap)
found_libc_mmap = !strncmp(bname + 1, "libc", 4);
if (!found_ld_mmap)
found_ld_mmap = !strncmp(bname + 1, "ld", 2);
} else if (!found_vdso_mmap)
found_vdso_mmap = !strcmp(event->mmap.filename, "[vdso]");
break;
case PERF_RECORD_SAMPLE:
/* Just ignore samples for now */
break;
default:
pr_debug("Unexpected perf_event->header.type %d!\n",
type);
++errs;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
}
}
/*
* We don't use poll here because at least at 3.1 times the
* PERF_RECORD_{!SAMPLE} events don't honour
* perf_event_attr.wakeup_events, just PERF_EVENT_SAMPLE does.
*/
if (total_events == before && false)
poll(evlist->pollfd, evlist->nr_fds, -1);
sleep(1);
if (++wakeups > 5) {
pr_debug("No PERF_RECORD_EXIT event!\n");
break;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
}
found_exit:
if (nr_events[PERF_RECORD_COMM] > 1) {
pr_debug("Excessive number of PERF_RECORD_COMM events!\n");
++errs;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
if (nr_events[PERF_RECORD_COMM] == 0) {
pr_debug("Missing PERF_RECORD_COMM for %s!\n", cmd);
++errs;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
if (!found_cmd_mmap) {
pr_debug("PERF_RECORD_MMAP for %s missing!\n", cmd);
++errs;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
if (!found_libc_mmap) {
pr_debug("PERF_RECORD_MMAP for %s missing!\n", "libc");
++errs;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
if (!found_ld_mmap) {
pr_debug("PERF_RECORD_MMAP for %s missing!\n", "ld");
++errs;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
if (!found_vdso_mmap) {
pr_debug("PERF_RECORD_MMAP for %s missing!\n", "[vdso]");
++errs;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
out_err:
perf_evlist__munmap(evlist);
out_free_cpu_mask:
CPU_FREE(cpu_mask);
out_delete_evlist:
perf_evlist__delete(evlist);
out:
return (err < 0 || errs > 0) ? -1 : 0;
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
}
#if defined(__x86_64__) || defined(__i386__)
#define barrier() asm volatile("" ::: "memory")
static u64 rdpmc(unsigned int counter)
{
unsigned int low, high;
asm volatile("rdpmc" : "=a" (low), "=d" (high) : "c" (counter));
return low | ((u64)high) << 32;
}
static u64 rdtsc(void)
{
unsigned int low, high;
asm volatile("rdtsc" : "=a" (low), "=d" (high));
return low | ((u64)high) << 32;
}
static u64 mmap_read_self(void *addr)
{
struct perf_event_mmap_page *pc = addr;
u32 seq, idx, time_mult = 0, time_shift = 0;
u64 count, cyc = 0, time_offset = 0, enabled, running, delta;
do {
seq = pc->lock;
barrier();
enabled = pc->time_enabled;
running = pc->time_running;
if (enabled != running) {
cyc = rdtsc();
time_mult = pc->time_mult;
time_shift = pc->time_shift;
time_offset = pc->time_offset;
}
idx = pc->index;
count = pc->offset;
if (idx)
count += rdpmc(idx - 1);
barrier();
} while (pc->lock != seq);
if (enabled != running) {
u64 quot, rem;
quot = (cyc >> time_shift);
rem = cyc & ((1 << time_shift) - 1);
delta = time_offset + quot * time_mult +
((rem * time_mult) >> time_shift);
enabled += delta;
if (idx)
running += delta;
quot = count / running;
rem = count % running;
count = quot * enabled + (rem * enabled) / running;
}
return count;
}
/*
* If the RDPMC instruction faults then signal this back to the test parent task:
*/
static void segfault_handler(int sig __used, siginfo_t *info __used, void *uc __used)
{
exit(-1);
}
static int __test__rdpmc(void)
{
long page_size = sysconf(_SC_PAGE_SIZE);
volatile int tmp = 0;
u64 i, loops = 1000;
int n;
int fd;
void *addr;
struct perf_event_attr attr = {
.type = PERF_TYPE_HARDWARE,
.config = PERF_COUNT_HW_INSTRUCTIONS,
.exclude_kernel = 1,
};
u64 delta_sum = 0;
struct sigaction sa;
sigfillset(&sa.sa_mask);
sa.sa_sigaction = segfault_handler;
sigaction(SIGSEGV, &sa, NULL);
fd = sys_perf_event_open(&attr, 0, -1, -1, 0);
if (fd < 0) {
die("Error: sys_perf_event_open() syscall returned "
"with %d (%s)\n", fd, strerror(errno));
}
addr = mmap(NULL, page_size, PROT_READ, MAP_SHARED, fd, 0);
if (addr == (void *)(-1)) {
die("Error: mmap() syscall returned "
"with (%s)\n", strerror(errno));
}
for (n = 0; n < 6; n++) {
u64 stamp, now, delta;
stamp = mmap_read_self(addr);
for (i = 0; i < loops; i++)
tmp++;
now = mmap_read_self(addr);
loops *= 10;
delta = now - stamp;
pr_debug("%14d: %14Lu\n", n, (long long)delta);
delta_sum += delta;
}
munmap(addr, page_size);
close(fd);
pr_debug(" ");
if (!delta_sum)
return -1;
return 0;
}
static int test__rdpmc(void)
{
int status = 0;
int wret = 0;
int ret;
int pid;
pid = fork();
if (pid < 0)
return -1;
if (!pid) {
ret = __test__rdpmc();
exit(ret);
}
wret = waitpid(pid, &status, 0);
if (wret < 0 || status)
return -1;
return 0;
}
#endif
static int test__perf_pmu(void)
{
return perf_pmu__test();
}
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
static struct test {
const char *desc;
int (*func)(void);
} tests[] = {
{
.desc = "vmlinux symtab matches kallsyms",
.func = test__vmlinux_matches_kallsyms,
},
{
.desc = "detect open syscall event",
.func = test__open_syscall_event,
},
{
.desc = "detect open syscall event on all cpus",
.func = test__open_syscall_event_on_all_cpus,
},
{
.desc = "read samples using the mmap interface",
.func = test__basic_mmap,
},
{
.desc = "parse events tests",
.func = parse_events__test,
},
#if defined(__x86_64__) || defined(__i386__)
{
.desc = "x86 rdpmc test",
.func = test__rdpmc,
},
#endif
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 21:13:50 +08:00
{
.desc = "Validate PERF_RECORD_* events & perf_sample fields",
.func = test__PERF_RECORD,
},
{
.desc = "Test perf pmu format parsing",
.func = test__perf_pmu,
},
{
.desc = "Test dso data interface",
.func = dso__test_data,
},
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
{
.func = NULL,
},
};
static bool perf_test__matches(int curr, int argc, const char *argv[])
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
{
int i;
if (argc == 0)
return true;
for (i = 0; i < argc; ++i) {
char *end;
long nr = strtoul(argv[i], &end, 10);
if (*end == '\0') {
if (nr == curr + 1)
return true;
continue;
}
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
if (strstr(tests[curr].desc, argv[i]))
return true;
}
return false;
}
static int __cmd_test(int argc, const char *argv[])
{
int i = 0;
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
while (tests[i].func) {
int curr = i++, err;
if (!perf_test__matches(curr, argc, argv))
continue;
pr_info("%2d: %s:", i, tests[curr].desc);
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
pr_debug("\n--- start ---\n");
err = tests[curr].func();
pr_debug("---- end ----\n%s:", tests[curr].desc);
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
pr_info(" %s\n", err ? "FAILED!\n" : "Ok");
}
return 0;
}
static int perf_test__list(int argc, const char **argv)
{
int i = 0;
while (tests[i].func) {
int curr = i++;
if (argc > 1 && !strstr(tests[curr].desc, argv[1]))
continue;
pr_info("%2d: %s\n", i, tests[curr].desc);
}
return 0;
}
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
int cmd_test(int argc, const char **argv, const char *prefix __used)
{
const char * const test_usage[] = {
"perf test [<options>] [{list <test-name-fragment>|[<test-name-fragments>|<test-numbers>]}]",
NULL,
};
const struct option test_options[] = {
OPT_INCR('v', "verbose", &verbose,
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
"be more verbose (show symbol address, etc)"),
OPT_END()
};
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
argc = parse_options(argc, argv, test_options, test_usage, 0);
if (argc >= 1 && !strcmp(argv[0], "list"))
return perf_test__list(argc, argv);
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
symbol_conf.priv_size = sizeof(int);
symbol_conf.sort_by_name = true;
symbol_conf.try_vmlinux_path = true;
if (symbol__init() < 0)
return -1;
return __cmd_test(argc, argv);
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 05:58:32 +08:00
}