linux_old1/drivers/net/ehea/ehea_main.c

3180 lines
75 KiB
C
Raw Normal View History

/*
* linux/drivers/net/ehea/ehea_main.c
*
* eHEA ethernet device driver for IBM eServer System p
*
* (C) Copyright IBM Corp. 2006
*
* Authors:
* Christoph Raisch <raisch@de.ibm.com>
* Jan-Bernd Themann <themann@de.ibm.com>
* Thomas Klein <tklein@de.ibm.com>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/if.h>
#include <linux/list.h>
#include <linux/if_ether.h>
#include <net/ip.h>
#include "ehea.h"
#include "ehea_qmr.h"
#include "ehea_phyp.h"
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Christoph Raisch <raisch@de.ibm.com>");
MODULE_DESCRIPTION("IBM eServer HEA Driver");
MODULE_VERSION(DRV_VERSION);
static int msg_level = -1;
static int rq1_entries = EHEA_DEF_ENTRIES_RQ1;
static int rq2_entries = EHEA_DEF_ENTRIES_RQ2;
static int rq3_entries = EHEA_DEF_ENTRIES_RQ3;
static int sq_entries = EHEA_DEF_ENTRIES_SQ;
static int use_mcs = 0;
static int use_lro = 0;
static int lro_max_aggr = EHEA_LRO_MAX_AGGR;
static int num_tx_qps = EHEA_NUM_TX_QP;
static int prop_carrier_state = 0;
module_param(msg_level, int, 0);
module_param(rq1_entries, int, 0);
module_param(rq2_entries, int, 0);
module_param(rq3_entries, int, 0);
module_param(sq_entries, int, 0);
module_param(prop_carrier_state, int, 0);
module_param(use_mcs, int, 0);
module_param(use_lro, int, 0);
module_param(lro_max_aggr, int, 0);
module_param(num_tx_qps, int, 0);
MODULE_PARM_DESC(num_tx_qps, "Number of TX-QPS");
MODULE_PARM_DESC(msg_level, "msg_level");
MODULE_PARM_DESC(prop_carrier_state, "Propagate carrier state of physical "
"port to stack. 1:yes, 0:no. Default = 0 ");
MODULE_PARM_DESC(rq3_entries, "Number of entries for Receive Queue 3 "
"[2^x - 1], x = [6..14]. Default = "
__MODULE_STRING(EHEA_DEF_ENTRIES_RQ3) ")");
MODULE_PARM_DESC(rq2_entries, "Number of entries for Receive Queue 2 "
"[2^x - 1], x = [6..14]. Default = "
__MODULE_STRING(EHEA_DEF_ENTRIES_RQ2) ")");
MODULE_PARM_DESC(rq1_entries, "Number of entries for Receive Queue 1 "
"[2^x - 1], x = [6..14]. Default = "
__MODULE_STRING(EHEA_DEF_ENTRIES_RQ1) ")");
MODULE_PARM_DESC(sq_entries, " Number of entries for the Send Queue "
"[2^x - 1], x = [6..14]. Default = "
__MODULE_STRING(EHEA_DEF_ENTRIES_SQ) ")");
MODULE_PARM_DESC(use_mcs, " 0:NAPI, 1:Multiple receive queues, Default = 0 ");
MODULE_PARM_DESC(lro_max_aggr, " LRO: Max packets to be aggregated. Default = "
__MODULE_STRING(EHEA_LRO_MAX_AGGR));
MODULE_PARM_DESC(use_lro, " Large Receive Offload, 1: enable, 0: disable, "
"Default = 0");
static int port_name_cnt = 0;
static LIST_HEAD(adapter_list);
u64 ehea_driver_flags = 0;
struct workqueue_struct *ehea_driver_wq;
struct work_struct ehea_rereg_mr_task;
static int __devinit ehea_probe_adapter(struct ibmebus_dev *dev,
const struct of_device_id *id);
static int __devexit ehea_remove(struct ibmebus_dev *dev);
static struct of_device_id ehea_device_table[] = {
{
.name = "lhea",
.compatible = "IBM,lhea",
},
{},
};
static struct ibmebus_driver ehea_driver = {
.name = "ehea",
.id_table = ehea_device_table,
.probe = ehea_probe_adapter,
.remove = ehea_remove,
};
void ehea_dump(void *adr, int len, char *msg) {
int x;
unsigned char *deb = adr;
for (x = 0; x < len; x += 16) {
printk(DRV_NAME " %s adr=%p ofs=%04x %016lx %016lx\n", msg,
deb, x, *((u64*)&deb[0]), *((u64*)&deb[8]));
deb += 16;
}
}
static struct net_device_stats *ehea_get_stats(struct net_device *dev)
{
struct ehea_port *port = netdev_priv(dev);
struct net_device_stats *stats = &port->stats;
struct hcp_ehea_port_cb2 *cb2;
u64 hret, rx_packets;
int i;
memset(stats, 0, sizeof(*stats));
cb2 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb2) {
ehea_error("no mem for cb2");
goto out;
}
hret = ehea_h_query_ehea_port(port->adapter->handle,
port->logical_port_id,
H_PORT_CB2, H_PORT_CB2_ALL, cb2);
if (hret != H_SUCCESS) {
ehea_error("query_ehea_port failed");
goto out_herr;
}
if (netif_msg_hw(port))
ehea_dump(cb2, sizeof(*cb2), "net_device_stats");
rx_packets = 0;
for (i = 0; i < port->num_def_qps; i++)
rx_packets += port->port_res[i].rx_packets;
stats->tx_packets = cb2->txucp + cb2->txmcp + cb2->txbcp;
stats->multicast = cb2->rxmcp;
stats->rx_errors = cb2->rxuerr;
stats->rx_bytes = cb2->rxo;
stats->tx_bytes = cb2->txo;
stats->rx_packets = rx_packets;
out_herr:
kfree(cb2);
out:
return stats;
}
static void ehea_refill_rq1(struct ehea_port_res *pr, int index, int nr_of_wqes)
{
struct sk_buff **skb_arr_rq1 = pr->rq1_skba.arr;
struct net_device *dev = pr->port->netdev;
int max_index_mask = pr->rq1_skba.len - 1;
int i;
if (!nr_of_wqes)
return;
for (i = 0; i < nr_of_wqes; i++) {
if (!skb_arr_rq1[index]) {
skb_arr_rq1[index] = netdev_alloc_skb(dev,
EHEA_L_PKT_SIZE);
if (!skb_arr_rq1[index]) {
ehea_error("%s: no mem for skb/%d wqes filled",
dev->name, i);
break;
}
}
index--;
index &= max_index_mask;
}
/* Ring doorbell */
ehea_update_rq1a(pr->qp, i);
}
static int ehea_init_fill_rq1(struct ehea_port_res *pr, int nr_rq1a)
{
int ret = 0;
struct sk_buff **skb_arr_rq1 = pr->rq1_skba.arr;
struct net_device *dev = pr->port->netdev;
int i;
for (i = 0; i < pr->rq1_skba.len; i++) {
skb_arr_rq1[i] = netdev_alloc_skb(dev, EHEA_L_PKT_SIZE);
if (!skb_arr_rq1[i]) {
ehea_error("%s: no mem for skb/%d wqes filled",
dev->name, i);
ret = -ENOMEM;
goto out;
}
}
/* Ring doorbell */
ehea_update_rq1a(pr->qp, nr_rq1a);
out:
return ret;
}
static int ehea_refill_rq_def(struct ehea_port_res *pr,
struct ehea_q_skb_arr *q_skba, int rq_nr,
int num_wqes, int wqe_type, int packet_size)
{
struct net_device *dev = pr->port->netdev;
struct ehea_qp *qp = pr->qp;
struct sk_buff **skb_arr = q_skba->arr;
struct ehea_rwqe *rwqe;
int i, index, max_index_mask, fill_wqes;
int ret = 0;
fill_wqes = q_skba->os_skbs + num_wqes;
if (!fill_wqes)
return ret;
index = q_skba->index;
max_index_mask = q_skba->len - 1;
for (i = 0; i < fill_wqes; i++) {
struct sk_buff *skb = netdev_alloc_skb(dev, packet_size);
if (!skb) {
ehea_error("%s: no mem for skb/%d wqes filled",
pr->port->netdev->name, i);
q_skba->os_skbs = fill_wqes - i;
ret = -ENOMEM;
break;
}
skb_reserve(skb, NET_IP_ALIGN);
skb_arr[index] = skb;
rwqe = ehea_get_next_rwqe(qp, rq_nr);
rwqe->wr_id = EHEA_BMASK_SET(EHEA_WR_ID_TYPE, wqe_type)
| EHEA_BMASK_SET(EHEA_WR_ID_INDEX, index);
rwqe->sg_list[0].l_key = pr->recv_mr.lkey;
rwqe->sg_list[0].vaddr = ehea_map_vaddr(skb->data);
rwqe->sg_list[0].len = packet_size;
rwqe->data_segments = 1;
index++;
index &= max_index_mask;
if (unlikely(test_bit(__EHEA_STOP_XFER, &ehea_driver_flags)))
goto out;
}
q_skba->index = index;
/* Ring doorbell */
iosync();
if (rq_nr == 2)
ehea_update_rq2a(pr->qp, i);
else
ehea_update_rq3a(pr->qp, i);
out:
return ret;
}
static int ehea_refill_rq2(struct ehea_port_res *pr, int nr_of_wqes)
{
return ehea_refill_rq_def(pr, &pr->rq2_skba, 2,
nr_of_wqes, EHEA_RWQE2_TYPE,
EHEA_RQ2_PKT_SIZE + NET_IP_ALIGN);
}
static int ehea_refill_rq3(struct ehea_port_res *pr, int nr_of_wqes)
{
return ehea_refill_rq_def(pr, &pr->rq3_skba, 3,
nr_of_wqes, EHEA_RWQE3_TYPE,
EHEA_MAX_PACKET_SIZE + NET_IP_ALIGN);
}
static inline int ehea_check_cqe(struct ehea_cqe *cqe, int *rq_num)
{
*rq_num = (cqe->type & EHEA_CQE_TYPE_RQ) >> 5;
if ((cqe->status & EHEA_CQE_STAT_ERR_MASK) == 0)
return 0;
if (((cqe->status & EHEA_CQE_STAT_ERR_TCP) != 0) &&
(cqe->header_length == 0))
return 0;
return -EINVAL;
}
static inline void ehea_fill_skb(struct net_device *dev,
struct sk_buff *skb, struct ehea_cqe *cqe)
{
int length = cqe->num_bytes_transfered - 4; /*remove CRC */
skb_put(skb, length);
skb->ip_summed = CHECKSUM_UNNECESSARY;
skb->protocol = eth_type_trans(skb, dev);
}
static inline struct sk_buff *get_skb_by_index(struct sk_buff **skb_array,
int arr_len,
struct ehea_cqe *cqe)
{
int skb_index = EHEA_BMASK_GET(EHEA_WR_ID_INDEX, cqe->wr_id);
struct sk_buff *skb;
void *pref;
int x;
x = skb_index + 1;
x &= (arr_len - 1);
pref = skb_array[x];
prefetchw(pref);
prefetchw(pref + EHEA_CACHE_LINE);
pref = (skb_array[x]->data);
prefetch(pref);
prefetch(pref + EHEA_CACHE_LINE);
prefetch(pref + EHEA_CACHE_LINE * 2);
prefetch(pref + EHEA_CACHE_LINE * 3);
skb = skb_array[skb_index];
skb_array[skb_index] = NULL;
return skb;
}
static inline struct sk_buff *get_skb_by_index_ll(struct sk_buff **skb_array,
int arr_len, int wqe_index)
{
struct sk_buff *skb;
void *pref;
int x;
x = wqe_index + 1;
x &= (arr_len - 1);
pref = skb_array[x];
prefetchw(pref);
prefetchw(pref + EHEA_CACHE_LINE);
pref = (skb_array[x]->data);
prefetchw(pref);
prefetchw(pref + EHEA_CACHE_LINE);
skb = skb_array[wqe_index];
skb_array[wqe_index] = NULL;
return skb;
}
static int ehea_treat_poll_error(struct ehea_port_res *pr, int rq,
struct ehea_cqe *cqe, int *processed_rq2,
int *processed_rq3)
{
struct sk_buff *skb;
if (cqe->status & EHEA_CQE_STAT_ERR_TCP)
pr->p_stats.err_tcp_cksum++;
if (cqe->status & EHEA_CQE_STAT_ERR_IP)
pr->p_stats.err_ip_cksum++;
if (cqe->status & EHEA_CQE_STAT_ERR_CRC)
pr->p_stats.err_frame_crc++;
if (netif_msg_rx_err(pr->port)) {
ehea_error("CQE Error for QP %d", pr->qp->init_attr.qp_nr);
ehea_dump(cqe, sizeof(*cqe), "CQE");
}
if (rq == 2) {
*processed_rq2 += 1;
skb = get_skb_by_index(pr->rq2_skba.arr, pr->rq2_skba.len, cqe);
dev_kfree_skb(skb);
} else if (rq == 3) {
*processed_rq3 += 1;
skb = get_skb_by_index(pr->rq3_skba.arr, pr->rq3_skba.len, cqe);
dev_kfree_skb(skb);
}
if (cqe->status & EHEA_CQE_STAT_FAT_ERR_MASK) {
ehea_error("Critical receive error. Resetting port.");
queue_work(pr->port->adapter->ehea_wq, &pr->port->reset_task);
return 1;
}
return 0;
}
static int get_skb_hdr(struct sk_buff *skb, void **iphdr,
void **tcph, u64 *hdr_flags, void *priv)
{
struct ehea_cqe *cqe = priv;
unsigned int ip_len;
struct iphdr *iph;
/* non tcp/udp packets */
if (!cqe->header_length)
return -1;
/* non tcp packet */
skb_reset_network_header(skb);
iph = ip_hdr(skb);
if (iph->protocol != IPPROTO_TCP)
return -1;
ip_len = ip_hdrlen(skb);
skb_set_transport_header(skb, ip_len);
*tcph = tcp_hdr(skb);
/* check if ip header and tcp header are complete */
if (iph->tot_len < ip_len + tcp_hdrlen(skb))
return -1;
*hdr_flags = LRO_IPV4 | LRO_TCP;
*iphdr = iph;
return 0;
}
static void ehea_proc_skb(struct ehea_port_res *pr, struct ehea_cqe *cqe,
struct sk_buff *skb)
{
int vlan_extracted = (cqe->status & EHEA_CQE_VLAN_TAG_XTRACT)
&& pr->port->vgrp;
if (use_lro) {
if (vlan_extracted)
lro_vlan_hwaccel_receive_skb(&pr->lro_mgr, skb,
pr->port->vgrp,
cqe->vlan_tag,
cqe);
else
lro_receive_skb(&pr->lro_mgr, skb, cqe);
} else {
if (vlan_extracted)
vlan_hwaccel_receive_skb(skb, pr->port->vgrp,
cqe->vlan_tag);
else
netif_receive_skb(skb);
}
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
static int ehea_proc_rwqes(struct net_device *dev,
struct ehea_port_res *pr,
int budget)
{
struct ehea_port *port = pr->port;
struct ehea_qp *qp = pr->qp;
struct ehea_cqe *cqe;
struct sk_buff *skb;
struct sk_buff **skb_arr_rq1 = pr->rq1_skba.arr;
struct sk_buff **skb_arr_rq2 = pr->rq2_skba.arr;
struct sk_buff **skb_arr_rq3 = pr->rq3_skba.arr;
int skb_arr_rq1_len = pr->rq1_skba.len;
int skb_arr_rq2_len = pr->rq2_skba.len;
int skb_arr_rq3_len = pr->rq3_skba.len;
int processed, processed_rq1, processed_rq2, processed_rq3;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
int wqe_index, last_wqe_index, rq, port_reset;
processed = processed_rq1 = processed_rq2 = processed_rq3 = 0;
last_wqe_index = 0;
cqe = ehea_poll_rq1(qp, &wqe_index);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
while ((processed < budget) && cqe) {
ehea_inc_rq1(qp);
processed_rq1++;
processed++;
if (netif_msg_rx_status(port))
ehea_dump(cqe, sizeof(*cqe), "CQE");
last_wqe_index = wqe_index;
rmb();
if (!ehea_check_cqe(cqe, &rq)) {
if (rq == 1) { /* LL RQ1 */
skb = get_skb_by_index_ll(skb_arr_rq1,
skb_arr_rq1_len,
wqe_index);
if (unlikely(!skb)) {
if (netif_msg_rx_err(port))
ehea_error("LL rq1: skb=NULL");
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
skb = netdev_alloc_skb(dev,
EHEA_L_PKT_SIZE);
if (!skb)
break;
}
skb_copy_to_linear_data(skb, ((char*)cqe) + 64,
cqe->num_bytes_transfered - 4);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
ehea_fill_skb(dev, skb, cqe);
} else if (rq == 2) { /* RQ2 */
skb = get_skb_by_index(skb_arr_rq2,
skb_arr_rq2_len, cqe);
if (unlikely(!skb)) {
if (netif_msg_rx_err(port))
ehea_error("rq2: skb=NULL");
break;
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
ehea_fill_skb(dev, skb, cqe);
processed_rq2++;
} else { /* RQ3 */
skb = get_skb_by_index(skb_arr_rq3,
skb_arr_rq3_len, cqe);
if (unlikely(!skb)) {
if (netif_msg_rx_err(port))
ehea_error("rq3: skb=NULL");
break;
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
ehea_fill_skb(dev, skb, cqe);
processed_rq3++;
}
ehea_proc_skb(pr, cqe, skb);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
dev->last_rx = jiffies;
} else {
pr->p_stats.poll_receive_errors++;
port_reset = ehea_treat_poll_error(pr, rq, cqe,
&processed_rq2,
&processed_rq3);
if (port_reset)
break;
}
cqe = ehea_poll_rq1(qp, &wqe_index);
}
if (use_lro)
lro_flush_all(&pr->lro_mgr);
pr->rx_packets += processed;
ehea_refill_rq1(pr, last_wqe_index, processed_rq1);
ehea_refill_rq2(pr, processed_rq2);
ehea_refill_rq3(pr, processed_rq3);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
return processed;
}
static struct ehea_cqe *ehea_proc_cqes(struct ehea_port_res *pr, int my_quota)
{
struct sk_buff *skb;
struct ehea_cq *send_cq = pr->send_cq;
struct ehea_cqe *cqe;
int quota = my_quota;
int cqe_counter = 0;
int swqe_av = 0;
int index;
unsigned long flags;
cqe = ehea_poll_cq(send_cq);
while(cqe && (quota > 0)) {
ehea_inc_cq(send_cq);
cqe_counter++;
rmb();
if (cqe->status & EHEA_CQE_STAT_ERR_MASK) {
ehea_error("Send Completion Error: Resetting port");
if (netif_msg_tx_err(pr->port))
ehea_dump(cqe, sizeof(*cqe), "Send CQE");
queue_work(pr->port->adapter->ehea_wq,
&pr->port->reset_task);
break;
}
if (netif_msg_tx_done(pr->port))
ehea_dump(cqe, sizeof(*cqe), "CQE");
if (likely(EHEA_BMASK_GET(EHEA_WR_ID_TYPE, cqe->wr_id)
== EHEA_SWQE2_TYPE)) {
index = EHEA_BMASK_GET(EHEA_WR_ID_INDEX, cqe->wr_id);
skb = pr->sq_skba.arr[index];
dev_kfree_skb(skb);
pr->sq_skba.arr[index] = NULL;
}
swqe_av += EHEA_BMASK_GET(EHEA_WR_ID_REFILL, cqe->wr_id);
quota--;
cqe = ehea_poll_cq(send_cq);
};
ehea_update_feca(send_cq, cqe_counter);
atomic_add(swqe_av, &pr->swqe_avail);
spin_lock_irqsave(&pr->netif_queue, flags);
if (pr->queue_stopped && (atomic_read(&pr->swqe_avail)
>= pr->swqe_refill_th)) {
netif_wake_queue(pr->port->netdev);
pr->queue_stopped = 0;
}
spin_unlock_irqrestore(&pr->netif_queue, flags);
return cqe;
}
#define EHEA_NAPI_POLL_NUM_BEFORE_IRQ 16
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
#define EHEA_POLL_MAX_CQES 65535
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
static int ehea_poll(struct napi_struct *napi, int budget)
{
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
struct ehea_port_res *pr = container_of(napi, struct ehea_port_res, napi);
struct net_device *dev = pr->port->netdev;
struct ehea_cqe *cqe;
struct ehea_cqe *cqe_skb = NULL;
int force_irq, wqe_index;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
int rx = 0;
force_irq = (pr->poll_counter > EHEA_NAPI_POLL_NUM_BEFORE_IRQ);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
cqe_skb = ehea_proc_cqes(pr, EHEA_POLL_MAX_CQES);
if (!force_irq)
rx += ehea_proc_rwqes(dev, pr, budget - rx);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
while ((rx != budget) || force_irq) {
pr->poll_counter = 0;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
force_irq = 0;
netif_rx_complete(dev, napi);
ehea_reset_cq_ep(pr->recv_cq);
ehea_reset_cq_ep(pr->send_cq);
ehea_reset_cq_n1(pr->recv_cq);
ehea_reset_cq_n1(pr->send_cq);
cqe = ehea_poll_rq1(pr->qp, &wqe_index);
cqe_skb = ehea_poll_cq(pr->send_cq);
if (!cqe && !cqe_skb)
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
return rx;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
if (!netif_rx_reschedule(dev, napi))
return rx;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
cqe_skb = ehea_proc_cqes(pr, EHEA_POLL_MAX_CQES);
rx += ehea_proc_rwqes(dev, pr, budget - rx);
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
pr->poll_counter++;
return rx;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
static void ehea_netpoll(struct net_device *dev)
{
struct ehea_port *port = netdev_priv(dev);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
int i;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
for (i = 0; i < port->num_def_qps; i++)
netif_rx_schedule(dev, &port->port_res[i].napi);
}
#endif
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t ehea_recv_irq_handler(int irq, void *param)
{
struct ehea_port_res *pr = param;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
netif_rx_schedule(pr->port->netdev, &pr->napi);
return IRQ_HANDLED;
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t ehea_qp_aff_irq_handler(int irq, void *param)
{
struct ehea_port *port = param;
struct ehea_eqe *eqe;
struct ehea_qp *qp;
u32 qp_token;
eqe = ehea_poll_eq(port->qp_eq);
while (eqe) {
qp_token = EHEA_BMASK_GET(EHEA_EQE_QP_TOKEN, eqe->entry);
ehea_error("QP aff_err: entry=0x%lx, token=0x%x",
eqe->entry, qp_token);
qp = port->port_res[qp_token].qp;
ehea_error_data(port->adapter, qp->fw_handle);
eqe = ehea_poll_eq(port->qp_eq);
}
queue_work(port->adapter->ehea_wq, &port->reset_task);
return IRQ_HANDLED;
}
static struct ehea_port *ehea_get_port(struct ehea_adapter *adapter,
int logical_port)
{
int i;
for (i = 0; i < EHEA_MAX_PORTS; i++)
if (adapter->port[i])
if (adapter->port[i]->logical_port_id == logical_port)
return adapter->port[i];
return NULL;
}
int ehea_sense_port_attr(struct ehea_port *port)
{
int ret;
u64 hret;
struct hcp_ehea_port_cb0 *cb0;
cb0 = kzalloc(PAGE_SIZE, GFP_ATOMIC); /* May be called via */
if (!cb0) { /* ehea_neq_tasklet() */
ehea_error("no mem for cb0");
ret = -ENOMEM;
goto out;
}
hret = ehea_h_query_ehea_port(port->adapter->handle,
port->logical_port_id, H_PORT_CB0,
EHEA_BMASK_SET(H_PORT_CB0_ALL, 0xFFFF),
cb0);
if (hret != H_SUCCESS) {
ret = -EIO;
goto out_free;
}
/* MAC address */
port->mac_addr = cb0->port_mac_addr << 16;
if (!is_valid_ether_addr((u8*)&port->mac_addr)) {
ret = -EADDRNOTAVAIL;
goto out_free;
}
/* Port speed */
switch (cb0->port_speed) {
case H_SPEED_10M_H:
port->port_speed = EHEA_SPEED_10M;
port->full_duplex = 0;
break;
case H_SPEED_10M_F:
port->port_speed = EHEA_SPEED_10M;
port->full_duplex = 1;
break;
case H_SPEED_100M_H:
port->port_speed = EHEA_SPEED_100M;
port->full_duplex = 0;
break;
case H_SPEED_100M_F:
port->port_speed = EHEA_SPEED_100M;
port->full_duplex = 1;
break;
case H_SPEED_1G_F:
port->port_speed = EHEA_SPEED_1G;
port->full_duplex = 1;
break;
case H_SPEED_10G_F:
port->port_speed = EHEA_SPEED_10G;
port->full_duplex = 1;
break;
default:
port->port_speed = 0;
port->full_duplex = 0;
break;
}
port->autoneg = 1;
port->num_mcs = cb0->num_default_qps;
/* Number of default QPs */
if (use_mcs)
port->num_def_qps = cb0->num_default_qps;
else
port->num_def_qps = 1;
if (!port->num_def_qps) {
ret = -EINVAL;
goto out_free;
}
port->num_tx_qps = num_tx_qps;
if (port->num_def_qps >= port->num_tx_qps)
port->num_add_tx_qps = 0;
else
port->num_add_tx_qps = port->num_tx_qps - port->num_def_qps;
ret = 0;
out_free:
if (ret || netif_msg_probe(port))
ehea_dump(cb0, sizeof(*cb0), "ehea_sense_port_attr");
kfree(cb0);
out:
return ret;
}
int ehea_set_portspeed(struct ehea_port *port, u32 port_speed)
{
struct hcp_ehea_port_cb4 *cb4;
u64 hret;
int ret = 0;
cb4 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb4) {
ehea_error("no mem for cb4");
ret = -ENOMEM;
goto out;
}
cb4->port_speed = port_speed;
netif_carrier_off(port->netdev);
hret = ehea_h_modify_ehea_port(port->adapter->handle,
port->logical_port_id,
H_PORT_CB4, H_PORT_CB4_SPEED, cb4);
if (hret == H_SUCCESS) {
port->autoneg = port_speed == EHEA_SPEED_AUTONEG ? 1 : 0;
hret = ehea_h_query_ehea_port(port->adapter->handle,
port->logical_port_id,
H_PORT_CB4, H_PORT_CB4_SPEED,
cb4);
if (hret == H_SUCCESS) {
switch (cb4->port_speed) {
case H_SPEED_10M_H:
port->port_speed = EHEA_SPEED_10M;
port->full_duplex = 0;
break;
case H_SPEED_10M_F:
port->port_speed = EHEA_SPEED_10M;
port->full_duplex = 1;
break;
case H_SPEED_100M_H:
port->port_speed = EHEA_SPEED_100M;
port->full_duplex = 0;
break;
case H_SPEED_100M_F:
port->port_speed = EHEA_SPEED_100M;
port->full_duplex = 1;
break;
case H_SPEED_1G_F:
port->port_speed = EHEA_SPEED_1G;
port->full_duplex = 1;
break;
case H_SPEED_10G_F:
port->port_speed = EHEA_SPEED_10G;
port->full_duplex = 1;
break;
default:
port->port_speed = 0;
port->full_duplex = 0;
break;
}
} else {
ehea_error("Failed sensing port speed");
ret = -EIO;
}
} else {
if (hret == H_AUTHORITY) {
ehea_info("Hypervisor denied setting port speed");
ret = -EPERM;
} else {
ret = -EIO;
ehea_error("Failed setting port speed");
}
}
if (!prop_carrier_state || (port->phy_link == EHEA_PHY_LINK_UP))
netif_carrier_on(port->netdev);
kfree(cb4);
out:
return ret;
}
static void ehea_parse_eqe(struct ehea_adapter *adapter, u64 eqe)
{
int ret;
u8 ec;
u8 portnum;
struct ehea_port *port;
ec = EHEA_BMASK_GET(NEQE_EVENT_CODE, eqe);
portnum = EHEA_BMASK_GET(NEQE_PORTNUM, eqe);
port = ehea_get_port(adapter, portnum);
switch (ec) {
case EHEA_EC_PORTSTATE_CHG: /* port state change */
if (!port) {
ehea_error("unknown portnum %x", portnum);
break;
}
if (EHEA_BMASK_GET(NEQE_PORT_UP, eqe)) {
if (!netif_carrier_ok(port->netdev)) {
ret = ehea_sense_port_attr(port);
if (ret) {
ehea_error("failed resensing port "
"attributes");
break;
}
if (netif_msg_link(port))
ehea_info("%s: Logical port up: %dMbps "
"%s Duplex",
port->netdev->name,
port->port_speed,
port->full_duplex ==
1 ? "Full" : "Half");
netif_carrier_on(port->netdev);
netif_wake_queue(port->netdev);
}
} else
if (netif_carrier_ok(port->netdev)) {
if (netif_msg_link(port))
ehea_info("%s: Logical port down",
port->netdev->name);
netif_carrier_off(port->netdev);
netif_stop_queue(port->netdev);
}
if (EHEA_BMASK_GET(NEQE_EXTSWITCH_PORT_UP, eqe)) {
port->phy_link = EHEA_PHY_LINK_UP;
if (netif_msg_link(port))
ehea_info("%s: Physical port up",
port->netdev->name);
if (prop_carrier_state)
netif_carrier_on(port->netdev);
} else {
port->phy_link = EHEA_PHY_LINK_DOWN;
if (netif_msg_link(port))
ehea_info("%s: Physical port down",
port->netdev->name);
if (prop_carrier_state)
netif_carrier_off(port->netdev);
}
if (EHEA_BMASK_GET(NEQE_EXTSWITCH_PRIMARY, eqe))
ehea_info("External switch port is primary port");
else
ehea_info("External switch port is backup port");
break;
case EHEA_EC_ADAPTER_MALFUNC:
ehea_error("Adapter malfunction");
break;
case EHEA_EC_PORT_MALFUNC:
ehea_info("Port malfunction: Device: %s", port->netdev->name);
netif_carrier_off(port->netdev);
netif_stop_queue(port->netdev);
break;
default:
ehea_error("unknown event code %x, eqe=0x%lX", ec, eqe);
break;
}
}
static void ehea_neq_tasklet(unsigned long data)
{
struct ehea_adapter *adapter = (struct ehea_adapter*)data;
struct ehea_eqe *eqe;
u64 event_mask;
eqe = ehea_poll_eq(adapter->neq);
ehea_debug("eqe=%p", eqe);
while (eqe) {
ehea_debug("*eqe=%lx", eqe->entry);
ehea_parse_eqe(adapter, eqe->entry);
eqe = ehea_poll_eq(adapter->neq);
ehea_debug("next eqe=%p", eqe);
}
event_mask = EHEA_BMASK_SET(NELR_PORTSTATE_CHG, 1)
| EHEA_BMASK_SET(NELR_ADAPTER_MALFUNC, 1)
| EHEA_BMASK_SET(NELR_PORT_MALFUNC, 1);
ehea_h_reset_events(adapter->handle,
adapter->neq->fw_handle, event_mask);
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t ehea_interrupt_neq(int irq, void *param)
{
struct ehea_adapter *adapter = param;
tasklet_hi_schedule(&adapter->neq_tasklet);
return IRQ_HANDLED;
}
static int ehea_fill_port_res(struct ehea_port_res *pr)
{
int ret;
struct ehea_qp_init_attr *init_attr = &pr->qp->init_attr;
ret = ehea_init_fill_rq1(pr, init_attr->act_nr_rwqes_rq1
- init_attr->act_nr_rwqes_rq2
- init_attr->act_nr_rwqes_rq3 - 1);
ret |= ehea_refill_rq2(pr, init_attr->act_nr_rwqes_rq2 - 1);
ret |= ehea_refill_rq3(pr, init_attr->act_nr_rwqes_rq3 - 1);
return ret;
}
static int ehea_reg_interrupts(struct net_device *dev)
{
struct ehea_port *port = netdev_priv(dev);
struct ehea_port_res *pr;
int i, ret;
snprintf(port->int_aff_name, EHEA_IRQ_NAME_SIZE - 1, "%s-aff",
dev->name);
ret = ibmebus_request_irq(NULL, port->qp_eq->attr.ist1,
ehea_qp_aff_irq_handler,
IRQF_DISABLED, port->int_aff_name, port);
if (ret) {
ehea_error("failed registering irq for qp_aff_irq_handler:"
"ist=%X", port->qp_eq->attr.ist1);
goto out_free_qpeq;
}
if (netif_msg_ifup(port))
ehea_info("irq_handle 0x%X for function qp_aff_irq_handler "
"registered", port->qp_eq->attr.ist1);
for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
pr = &port->port_res[i];
snprintf(pr->int_send_name, EHEA_IRQ_NAME_SIZE - 1,
"%s-queue%d", dev->name, i);
ret = ibmebus_request_irq(NULL, pr->eq->attr.ist1,
ehea_recv_irq_handler,
IRQF_DISABLED, pr->int_send_name,
pr);
if (ret) {
ehea_error("failed registering irq for ehea_queue "
"port_res_nr:%d, ist=%X", i,
pr->eq->attr.ist1);
goto out_free_req;
}
if (netif_msg_ifup(port))
ehea_info("irq_handle 0x%X for function ehea_queue_int "
"%d registered", pr->eq->attr.ist1, i);
}
out:
return ret;
out_free_req:
while (--i >= 0) {
u32 ist = port->port_res[i].eq->attr.ist1;
ibmebus_free_irq(NULL, ist, &port->port_res[i]);
}
out_free_qpeq:
ibmebus_free_irq(NULL, port->qp_eq->attr.ist1, port);
i = port->num_def_qps;
goto out;
}
static void ehea_free_interrupts(struct net_device *dev)
{
struct ehea_port *port = netdev_priv(dev);
struct ehea_port_res *pr;
int i;
/* send */
for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
pr = &port->port_res[i];
ibmebus_free_irq(NULL, pr->eq->attr.ist1, pr);
if (netif_msg_intr(port))
ehea_info("free send irq for res %d with handle 0x%X",
i, pr->eq->attr.ist1);
}
/* associated events */
ibmebus_free_irq(NULL, port->qp_eq->attr.ist1, port);
if (netif_msg_intr(port))
ehea_info("associated event interrupt for handle 0x%X freed",
port->qp_eq->attr.ist1);
}
static int ehea_configure_port(struct ehea_port *port)
{
int ret, i;
u64 hret, mask;
struct hcp_ehea_port_cb0 *cb0;
ret = -ENOMEM;
cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb0)
goto out;
cb0->port_rc = EHEA_BMASK_SET(PXLY_RC_VALID, 1)
| EHEA_BMASK_SET(PXLY_RC_IP_CHKSUM, 1)
| EHEA_BMASK_SET(PXLY_RC_TCP_UDP_CHKSUM, 1)
| EHEA_BMASK_SET(PXLY_RC_VLAN_XTRACT, 1)
| EHEA_BMASK_SET(PXLY_RC_VLAN_TAG_FILTER,
PXLY_RC_VLAN_FILTER)
| EHEA_BMASK_SET(PXLY_RC_JUMBO_FRAME, 1);
for (i = 0; i < port->num_mcs; i++)
if (use_mcs)
cb0->default_qpn_arr[i] =
port->port_res[i].qp->init_attr.qp_nr;
else
cb0->default_qpn_arr[i] =
port->port_res[0].qp->init_attr.qp_nr;
if (netif_msg_ifup(port))
ehea_dump(cb0, sizeof(*cb0), "ehea_configure_port");
mask = EHEA_BMASK_SET(H_PORT_CB0_PRC, 1)
| EHEA_BMASK_SET(H_PORT_CB0_DEFQPNARRAY, 1);
hret = ehea_h_modify_ehea_port(port->adapter->handle,
port->logical_port_id,
H_PORT_CB0, mask, cb0);
ret = -EIO;
if (hret != H_SUCCESS)
goto out_free;
ret = 0;
out_free:
kfree(cb0);
out:
return ret;
}
int ehea_gen_smrs(struct ehea_port_res *pr)
{
int ret;
struct ehea_adapter *adapter = pr->port->adapter;
ret = ehea_gen_smr(adapter, &adapter->mr, &pr->send_mr);
if (ret)
goto out;
ret = ehea_gen_smr(adapter, &adapter->mr, &pr->recv_mr);
if (ret)
goto out_free;
return 0;
out_free:
ehea_rem_mr(&pr->send_mr);
out:
ehea_error("Generating SMRS failed\n");
return -EIO;
}
int ehea_rem_smrs(struct ehea_port_res *pr)
{
if ((ehea_rem_mr(&pr->send_mr))
|| (ehea_rem_mr(&pr->recv_mr)))
return -EIO;
else
return 0;
}
static int ehea_init_q_skba(struct ehea_q_skb_arr *q_skba, int max_q_entries)
{
int arr_size = sizeof(void*) * max_q_entries;
q_skba->arr = vmalloc(arr_size);
if (!q_skba->arr)
return -ENOMEM;
memset(q_skba->arr, 0, arr_size);
q_skba->len = max_q_entries;
q_skba->index = 0;
q_skba->os_skbs = 0;
return 0;
}
static int ehea_init_port_res(struct ehea_port *port, struct ehea_port_res *pr,
struct port_res_cfg *pr_cfg, int queue_token)
{
struct ehea_adapter *adapter = port->adapter;
enum ehea_eq_type eq_type = EHEA_EQ;
struct ehea_qp_init_attr *init_attr = NULL;
int ret = -EIO;
memset(pr, 0, sizeof(struct ehea_port_res));
pr->port = port;
spin_lock_init(&pr->xmit_lock);
spin_lock_init(&pr->netif_queue);
pr->eq = ehea_create_eq(adapter, eq_type, EHEA_MAX_ENTRIES_EQ, 0);
if (!pr->eq) {
ehea_error("create_eq failed (eq)");
goto out_free;
}
pr->recv_cq = ehea_create_cq(adapter, pr_cfg->max_entries_rcq,
pr->eq->fw_handle,
port->logical_port_id);
if (!pr->recv_cq) {
ehea_error("create_cq failed (cq_recv)");
goto out_free;
}
pr->send_cq = ehea_create_cq(adapter, pr_cfg->max_entries_scq,
pr->eq->fw_handle,
port->logical_port_id);
if (!pr->send_cq) {
ehea_error("create_cq failed (cq_send)");
goto out_free;
}
if (netif_msg_ifup(port))
ehea_info("Send CQ: act_nr_cqes=%d, Recv CQ: act_nr_cqes=%d",
pr->send_cq->attr.act_nr_of_cqes,
pr->recv_cq->attr.act_nr_of_cqes);
init_attr = kzalloc(sizeof(*init_attr), GFP_KERNEL);
if (!init_attr) {
ret = -ENOMEM;
ehea_error("no mem for ehea_qp_init_attr");
goto out_free;
}
init_attr->low_lat_rq1 = 1;
init_attr->signalingtype = 1; /* generate CQE if specified in WQE */
init_attr->rq_count = 3;
init_attr->qp_token = queue_token;
init_attr->max_nr_send_wqes = pr_cfg->max_entries_sq;
init_attr->max_nr_rwqes_rq1 = pr_cfg->max_entries_rq1;
init_attr->max_nr_rwqes_rq2 = pr_cfg->max_entries_rq2;
init_attr->max_nr_rwqes_rq3 = pr_cfg->max_entries_rq3;
init_attr->wqe_size_enc_sq = EHEA_SG_SQ;
init_attr->wqe_size_enc_rq1 = EHEA_SG_RQ1;
init_attr->wqe_size_enc_rq2 = EHEA_SG_RQ2;
init_attr->wqe_size_enc_rq3 = EHEA_SG_RQ3;
init_attr->rq2_threshold = EHEA_RQ2_THRESHOLD;
init_attr->rq3_threshold = EHEA_RQ3_THRESHOLD;
init_attr->port_nr = port->logical_port_id;
init_attr->send_cq_handle = pr->send_cq->fw_handle;
init_attr->recv_cq_handle = pr->recv_cq->fw_handle;
init_attr->aff_eq_handle = port->qp_eq->fw_handle;
pr->qp = ehea_create_qp(adapter, adapter->pd, init_attr);
if (!pr->qp) {
ehea_error("create_qp failed");
ret = -EIO;
goto out_free;
}
if (netif_msg_ifup(port))
ehea_info("QP: qp_nr=%d\n act_nr_snd_wqe=%d\n nr_rwqe_rq1=%d\n "
"nr_rwqe_rq2=%d\n nr_rwqe_rq3=%d", init_attr->qp_nr,
init_attr->act_nr_send_wqes,
init_attr->act_nr_rwqes_rq1,
init_attr->act_nr_rwqes_rq2,
init_attr->act_nr_rwqes_rq3);
ret = ehea_init_q_skba(&pr->sq_skba, init_attr->act_nr_send_wqes + 1);
ret |= ehea_init_q_skba(&pr->rq1_skba, init_attr->act_nr_rwqes_rq1 + 1);
ret |= ehea_init_q_skba(&pr->rq2_skba, init_attr->act_nr_rwqes_rq2 + 1);
ret |= ehea_init_q_skba(&pr->rq3_skba, init_attr->act_nr_rwqes_rq3 + 1);
if (ret)
goto out_free;
pr->swqe_refill_th = init_attr->act_nr_send_wqes / 10;
if (ehea_gen_smrs(pr) != 0) {
ret = -EIO;
goto out_free;
}
atomic_set(&pr->swqe_avail, init_attr->act_nr_send_wqes - 1);
kfree(init_attr);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
netif_napi_add(pr->port->netdev, &pr->napi, ehea_poll, 64);
pr->lro_mgr.max_aggr = pr->port->lro_max_aggr;
pr->lro_mgr.max_desc = MAX_LRO_DESCRIPTORS;
pr->lro_mgr.lro_arr = pr->lro_desc;
pr->lro_mgr.get_skb_header = get_skb_hdr;
pr->lro_mgr.features = LRO_F_NAPI | LRO_F_EXTRACT_VLAN_ID;
pr->lro_mgr.dev = port->netdev;
pr->lro_mgr.ip_summed = CHECKSUM_UNNECESSARY;
pr->lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY;
ret = 0;
goto out;
out_free:
kfree(init_attr);
vfree(pr->sq_skba.arr);
vfree(pr->rq1_skba.arr);
vfree(pr->rq2_skba.arr);
vfree(pr->rq3_skba.arr);
ehea_destroy_qp(pr->qp);
ehea_destroy_cq(pr->send_cq);
ehea_destroy_cq(pr->recv_cq);
ehea_destroy_eq(pr->eq);
out:
return ret;
}
static int ehea_clean_portres(struct ehea_port *port, struct ehea_port_res *pr)
{
int ret, i;
ret = ehea_destroy_qp(pr->qp);
if (!ret) {
ehea_destroy_cq(pr->send_cq);
ehea_destroy_cq(pr->recv_cq);
ehea_destroy_eq(pr->eq);
for (i = 0; i < pr->rq1_skba.len; i++)
if (pr->rq1_skba.arr[i])
dev_kfree_skb(pr->rq1_skba.arr[i]);
for (i = 0; i < pr->rq2_skba.len; i++)
if (pr->rq2_skba.arr[i])
dev_kfree_skb(pr->rq2_skba.arr[i]);
for (i = 0; i < pr->rq3_skba.len; i++)
if (pr->rq3_skba.arr[i])
dev_kfree_skb(pr->rq3_skba.arr[i]);
for (i = 0; i < pr->sq_skba.len; i++)
if (pr->sq_skba.arr[i])
dev_kfree_skb(pr->sq_skba.arr[i]);
vfree(pr->rq1_skba.arr);
vfree(pr->rq2_skba.arr);
vfree(pr->rq3_skba.arr);
vfree(pr->sq_skba.arr);
ret = ehea_rem_smrs(pr);
}
return ret;
}
/*
* The write_* functions store information in swqe which is used by
* the hardware to calculate the ip/tcp/udp checksum
*/
static inline void write_ip_start_end(struct ehea_swqe *swqe,
const struct sk_buff *skb)
{
swqe->ip_start = skb_network_offset(skb);
swqe->ip_end = (u8)(swqe->ip_start + ip_hdrlen(skb) - 1);
}
static inline void write_tcp_offset_end(struct ehea_swqe *swqe,
const struct sk_buff *skb)
{
swqe->tcp_offset =
(u8)(swqe->ip_end + 1 + offsetof(struct tcphdr, check));
swqe->tcp_end = (u16)skb->len - 1;
}
static inline void write_udp_offset_end(struct ehea_swqe *swqe,
const struct sk_buff *skb)
{
swqe->tcp_offset =
(u8)(swqe->ip_end + 1 + offsetof(struct udphdr, check));
swqe->tcp_end = (u16)skb->len - 1;
}
static void write_swqe2_TSO(struct sk_buff *skb,
struct ehea_swqe *swqe, u32 lkey)
{
struct ehea_vsgentry *sg1entry = &swqe->u.immdata_desc.sg_entry;
u8 *imm_data = &swqe->u.immdata_desc.immediate_data[0];
int skb_data_size = skb->len - skb->data_len;
int headersize;
/* Packet is TCP with TSO enabled */
swqe->tx_control |= EHEA_SWQE_TSO;
swqe->mss = skb_shinfo(skb)->gso_size;
/* copy only eth/ip/tcp headers to immediate data and
* the rest of skb->data to sg1entry
*/
headersize = ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb);
skb_data_size = skb->len - skb->data_len;
if (skb_data_size >= headersize) {
/* copy immediate data */
skb_copy_from_linear_data(skb, imm_data, headersize);
swqe->immediate_data_length = headersize;
if (skb_data_size > headersize) {
/* set sg1entry data */
sg1entry->l_key = lkey;
sg1entry->len = skb_data_size - headersize;
sg1entry->vaddr =
ehea_map_vaddr(skb->data + headersize);
swqe->descriptors++;
}
} else
ehea_error("cannot handle fragmented headers");
}
static void write_swqe2_nonTSO(struct sk_buff *skb,
struct ehea_swqe *swqe, u32 lkey)
{
int skb_data_size = skb->len - skb->data_len;
u8 *imm_data = &swqe->u.immdata_desc.immediate_data[0];
struct ehea_vsgentry *sg1entry = &swqe->u.immdata_desc.sg_entry;
/* Packet is any nonTSO type
*
* Copy as much as possible skb->data to immediate data and
* the rest to sg1entry
*/
if (skb_data_size >= SWQE2_MAX_IMM) {
/* copy immediate data */
skb_copy_from_linear_data(skb, imm_data, SWQE2_MAX_IMM);
swqe->immediate_data_length = SWQE2_MAX_IMM;
if (skb_data_size > SWQE2_MAX_IMM) {
/* copy sg1entry data */
sg1entry->l_key = lkey;
sg1entry->len = skb_data_size - SWQE2_MAX_IMM;
sg1entry->vaddr =
ehea_map_vaddr(skb->data + SWQE2_MAX_IMM);
swqe->descriptors++;
}
} else {
skb_copy_from_linear_data(skb, imm_data, skb_data_size);
swqe->immediate_data_length = skb_data_size;
}
}
static inline void write_swqe2_data(struct sk_buff *skb, struct net_device *dev,
struct ehea_swqe *swqe, u32 lkey)
{
struct ehea_vsgentry *sg_list, *sg1entry, *sgentry;
skb_frag_t *frag;
int nfrags, sg1entry_contains_frag_data, i;
nfrags = skb_shinfo(skb)->nr_frags;
sg1entry = &swqe->u.immdata_desc.sg_entry;
sg_list = (struct ehea_vsgentry*)&swqe->u.immdata_desc.sg_list;
swqe->descriptors = 0;
sg1entry_contains_frag_data = 0;
if ((dev->features & NETIF_F_TSO) && skb_shinfo(skb)->gso_size)
write_swqe2_TSO(skb, swqe, lkey);
else
write_swqe2_nonTSO(skb, swqe, lkey);
/* write descriptors */
if (nfrags > 0) {
if (swqe->descriptors == 0) {
/* sg1entry not yet used */
frag = &skb_shinfo(skb)->frags[0];
/* copy sg1entry data */
sg1entry->l_key = lkey;
sg1entry->len = frag->size;
sg1entry->vaddr =
ehea_map_vaddr(page_address(frag->page)
+ frag->page_offset);
swqe->descriptors++;
sg1entry_contains_frag_data = 1;
}
for (i = sg1entry_contains_frag_data; i < nfrags; i++) {
frag = &skb_shinfo(skb)->frags[i];
sgentry = &sg_list[i - sg1entry_contains_frag_data];
sgentry->l_key = lkey;
sgentry->len = frag->size;
sgentry->vaddr =
ehea_map_vaddr(page_address(frag->page)
+ frag->page_offset);
swqe->descriptors++;
}
}
}
static int ehea_broadcast_reg_helper(struct ehea_port *port, u32 hcallid)
{
int ret = 0;
u64 hret;
u8 reg_type;
/* De/Register untagged packets */
reg_type = EHEA_BCMC_BROADCAST | EHEA_BCMC_UNTAGGED;
hret = ehea_h_reg_dereg_bcmc(port->adapter->handle,
port->logical_port_id,
reg_type, port->mac_addr, 0, hcallid);
if (hret != H_SUCCESS) {
ehea_error("%sregistering bc address failed (tagged)",
hcallid == H_REG_BCMC ? "" : "de");
ret = -EIO;
goto out_herr;
}
/* De/Register VLAN packets */
reg_type = EHEA_BCMC_BROADCAST | EHEA_BCMC_VLANID_ALL;
hret = ehea_h_reg_dereg_bcmc(port->adapter->handle,
port->logical_port_id,
reg_type, port->mac_addr, 0, hcallid);
if (hret != H_SUCCESS) {
ehea_error("%sregistering bc address failed (vlan)",
hcallid == H_REG_BCMC ? "" : "de");
ret = -EIO;
}
out_herr:
return ret;
}
static int ehea_set_mac_addr(struct net_device *dev, void *sa)
{
struct ehea_port *port = netdev_priv(dev);
struct sockaddr *mac_addr = sa;
struct hcp_ehea_port_cb0 *cb0;
int ret;
u64 hret;
if (!is_valid_ether_addr(mac_addr->sa_data)) {
ret = -EADDRNOTAVAIL;
goto out;
}
cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb0) {
ehea_error("no mem for cb0");
ret = -ENOMEM;
goto out;
}
memcpy(&(cb0->port_mac_addr), &(mac_addr->sa_data[0]), ETH_ALEN);
cb0->port_mac_addr = cb0->port_mac_addr >> 16;
hret = ehea_h_modify_ehea_port(port->adapter->handle,
port->logical_port_id, H_PORT_CB0,
EHEA_BMASK_SET(H_PORT_CB0_MAC, 1), cb0);
if (hret != H_SUCCESS) {
ret = -EIO;
goto out_free;
}
memcpy(dev->dev_addr, mac_addr->sa_data, dev->addr_len);
/* Deregister old MAC in pHYP */
ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
if (ret)
goto out_free;
port->mac_addr = cb0->port_mac_addr << 16;
/* Register new MAC in pHYP */
ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
if (ret)
goto out_free;
ret = 0;
out_free:
kfree(cb0);
out:
return ret;
}
static void ehea_promiscuous_error(u64 hret, int enable)
{
if (hret == H_AUTHORITY)
ehea_info("Hypervisor denied %sabling promiscuous mode",
enable == 1 ? "en" : "dis");
else
ehea_error("failed %sabling promiscuous mode",
enable == 1 ? "en" : "dis");
}
static void ehea_promiscuous(struct net_device *dev, int enable)
{
struct ehea_port *port = netdev_priv(dev);
struct hcp_ehea_port_cb7 *cb7;
u64 hret;
if ((enable && port->promisc) || (!enable && !port->promisc))
return;
cb7 = kzalloc(PAGE_SIZE, GFP_ATOMIC);
if (!cb7) {
ehea_error("no mem for cb7");
goto out;
}
/* Modify Pxs_DUCQPN in CB7 */
cb7->def_uc_qpn = enable == 1 ? port->port_res[0].qp->fw_handle : 0;
hret = ehea_h_modify_ehea_port(port->adapter->handle,
port->logical_port_id,
H_PORT_CB7, H_PORT_CB7_DUCQPN, cb7);
if (hret) {
ehea_promiscuous_error(hret, enable);
goto out;
}
port->promisc = enable;
out:
kfree(cb7);
return;
}
static u64 ehea_multicast_reg_helper(struct ehea_port *port, u64 mc_mac_addr,
u32 hcallid)
{
u64 hret;
u8 reg_type;
reg_type = EHEA_BCMC_SCOPE_ALL | EHEA_BCMC_MULTICAST
| EHEA_BCMC_UNTAGGED;
hret = ehea_h_reg_dereg_bcmc(port->adapter->handle,
port->logical_port_id,
reg_type, mc_mac_addr, 0, hcallid);
if (hret)
goto out;
reg_type = EHEA_BCMC_SCOPE_ALL | EHEA_BCMC_MULTICAST
| EHEA_BCMC_VLANID_ALL;
hret = ehea_h_reg_dereg_bcmc(port->adapter->handle,
port->logical_port_id,
reg_type, mc_mac_addr, 0, hcallid);
out:
return hret;
}
static int ehea_drop_multicast_list(struct net_device *dev)
{
struct ehea_port *port = netdev_priv(dev);
struct ehea_mc_list *mc_entry = port->mc_list;
struct list_head *pos;
struct list_head *temp;
int ret = 0;
u64 hret;
list_for_each_safe(pos, temp, &(port->mc_list->list)) {
mc_entry = list_entry(pos, struct ehea_mc_list, list);
hret = ehea_multicast_reg_helper(port, mc_entry->macaddr,
H_DEREG_BCMC);
if (hret) {
ehea_error("failed deregistering mcast MAC");
ret = -EIO;
}
list_del(pos);
kfree(mc_entry);
}
return ret;
}
static void ehea_allmulti(struct net_device *dev, int enable)
{
struct ehea_port *port = netdev_priv(dev);
u64 hret;
if (!port->allmulti) {
if (enable) {
/* Enable ALLMULTI */
ehea_drop_multicast_list(dev);
hret = ehea_multicast_reg_helper(port, 0, H_REG_BCMC);
if (!hret)
port->allmulti = 1;
else
ehea_error("failed enabling IFF_ALLMULTI");
}
} else
if (!enable) {
/* Disable ALLMULTI */
hret = ehea_multicast_reg_helper(port, 0, H_DEREG_BCMC);
if (!hret)
port->allmulti = 0;
else
ehea_error("failed disabling IFF_ALLMULTI");
}
}
static void ehea_add_multicast_entry(struct ehea_port* port, u8* mc_mac_addr)
{
struct ehea_mc_list *ehea_mcl_entry;
u64 hret;
ehea_mcl_entry = kzalloc(sizeof(*ehea_mcl_entry), GFP_ATOMIC);
if (!ehea_mcl_entry) {
ehea_error("no mem for mcl_entry");
return;
}
INIT_LIST_HEAD(&ehea_mcl_entry->list);
memcpy(&ehea_mcl_entry->macaddr, mc_mac_addr, ETH_ALEN);
hret = ehea_multicast_reg_helper(port, ehea_mcl_entry->macaddr,
H_REG_BCMC);
if (!hret)
list_add(&ehea_mcl_entry->list, &port->mc_list->list);
else {
ehea_error("failed registering mcast MAC");
kfree(ehea_mcl_entry);
}
}
static void ehea_set_multicast_list(struct net_device *dev)
{
struct ehea_port *port = netdev_priv(dev);
struct dev_mc_list *k_mcl_entry;
int ret, i;
if (dev->flags & IFF_PROMISC) {
ehea_promiscuous(dev, 1);
return;
}
ehea_promiscuous(dev, 0);
if (dev->flags & IFF_ALLMULTI) {
ehea_allmulti(dev, 1);
return;
}
ehea_allmulti(dev, 0);
if (dev->mc_count) {
ret = ehea_drop_multicast_list(dev);
if (ret) {
/* Dropping the current multicast list failed.
* Enabling ALL_MULTI is the best we can do.
*/
ehea_allmulti(dev, 1);
}
if (dev->mc_count > port->adapter->max_mc_mac) {
ehea_info("Mcast registration limit reached (0x%lx). "
"Use ALLMULTI!",
port->adapter->max_mc_mac);
goto out;
}
for (i = 0, k_mcl_entry = dev->mc_list;
i < dev->mc_count;
i++, k_mcl_entry = k_mcl_entry->next) {
ehea_add_multicast_entry(port, k_mcl_entry->dmi_addr);
}
}
out:
return;
}
static int ehea_change_mtu(struct net_device *dev, int new_mtu)
{
if ((new_mtu < 68) || (new_mtu > EHEA_MAX_PACKET_SIZE))
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
static void ehea_xmit2(struct sk_buff *skb, struct net_device *dev,
struct ehea_swqe *swqe, u32 lkey)
{
if (skb->protocol == htons(ETH_P_IP)) {
const struct iphdr *iph = ip_hdr(skb);
/* IPv4 */
swqe->tx_control |= EHEA_SWQE_CRC
| EHEA_SWQE_IP_CHECKSUM
| EHEA_SWQE_TCP_CHECKSUM
| EHEA_SWQE_IMM_DATA_PRESENT
| EHEA_SWQE_DESCRIPTORS_PRESENT;
write_ip_start_end(swqe, skb);
if (iph->protocol == IPPROTO_UDP) {
if ((iph->frag_off & IP_MF)
|| (iph->frag_off & IP_OFFSET))
/* IP fragment, so don't change cs */
swqe->tx_control &= ~EHEA_SWQE_TCP_CHECKSUM;
else
write_udp_offset_end(swqe, skb);
} else if (iph->protocol == IPPROTO_TCP) {
write_tcp_offset_end(swqe, skb);
}
/* icmp (big data) and ip segmentation packets (all other ip
packets) do not require any special handling */
} else {
/* Other Ethernet Protocol */
swqe->tx_control |= EHEA_SWQE_CRC
| EHEA_SWQE_IMM_DATA_PRESENT
| EHEA_SWQE_DESCRIPTORS_PRESENT;
}
write_swqe2_data(skb, dev, swqe, lkey);
}
static void ehea_xmit3(struct sk_buff *skb, struct net_device *dev,
struct ehea_swqe *swqe)
{
int nfrags = skb_shinfo(skb)->nr_frags;
u8 *imm_data = &swqe->u.immdata_nodesc.immediate_data[0];
skb_frag_t *frag;
int i;
if (skb->protocol == htons(ETH_P_IP)) {
const struct iphdr *iph = ip_hdr(skb);
/* IPv4 */
write_ip_start_end(swqe, skb);
if (iph->protocol == IPPROTO_TCP) {
swqe->tx_control |= EHEA_SWQE_CRC
| EHEA_SWQE_IP_CHECKSUM
| EHEA_SWQE_TCP_CHECKSUM
| EHEA_SWQE_IMM_DATA_PRESENT;
write_tcp_offset_end(swqe, skb);
} else if (iph->protocol == IPPROTO_UDP) {
if ((iph->frag_off & IP_MF)
|| (iph->frag_off & IP_OFFSET))
/* IP fragment, so don't change cs */
swqe->tx_control |= EHEA_SWQE_CRC
| EHEA_SWQE_IMM_DATA_PRESENT;
else {
swqe->tx_control |= EHEA_SWQE_CRC
| EHEA_SWQE_IP_CHECKSUM
| EHEA_SWQE_TCP_CHECKSUM
| EHEA_SWQE_IMM_DATA_PRESENT;
write_udp_offset_end(swqe, skb);
}
} else {
/* icmp (big data) and
ip segmentation packets (all other ip packets) */
swqe->tx_control |= EHEA_SWQE_CRC
| EHEA_SWQE_IP_CHECKSUM
| EHEA_SWQE_IMM_DATA_PRESENT;
}
} else {
/* Other Ethernet Protocol */
swqe->tx_control |= EHEA_SWQE_CRC | EHEA_SWQE_IMM_DATA_PRESENT;
}
/* copy (immediate) data */
if (nfrags == 0) {
/* data is in a single piece */
skb_copy_from_linear_data(skb, imm_data, skb->len);
} else {
/* first copy data from the skb->data buffer ... */
skb_copy_from_linear_data(skb, imm_data,
skb->len - skb->data_len);
imm_data += skb->len - skb->data_len;
/* ... then copy data from the fragments */
for (i = 0; i < nfrags; i++) {
frag = &skb_shinfo(skb)->frags[i];
memcpy(imm_data,
page_address(frag->page) + frag->page_offset,
frag->size);
imm_data += frag->size;
}
}
swqe->immediate_data_length = skb->len;
dev_kfree_skb(skb);
}
static inline int ehea_hash_skb(struct sk_buff *skb, int num_qps)
{
struct tcphdr *tcp;
u32 tmp;
if ((skb->protocol == htons(ETH_P_IP)) &&
(ip_hdr(skb)->protocol == IPPROTO_TCP)) {
tcp = (struct tcphdr*)(skb_network_header(skb) + (ip_hdr(skb)->ihl * 4));
tmp = (tcp->source + (tcp->dest << 16)) % 31;
tmp += ip_hdr(skb)->daddr % 31;
return tmp % num_qps;
}
else
return 0;
}
static int ehea_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ehea_port *port = netdev_priv(dev);
struct ehea_swqe *swqe;
unsigned long flags;
u32 lkey;
int swqe_index;
struct ehea_port_res *pr;
pr = &port->port_res[ehea_hash_skb(skb, port->num_tx_qps)];
if (!spin_trylock(&pr->xmit_lock))
return NETDEV_TX_BUSY;
if (pr->queue_stopped) {
spin_unlock(&pr->xmit_lock);
return NETDEV_TX_BUSY;
}
swqe = ehea_get_swqe(pr->qp, &swqe_index);
memset(swqe, 0, SWQE_HEADER_SIZE);
atomic_dec(&pr->swqe_avail);
if (skb->len <= SWQE3_MAX_IMM) {
u32 sig_iv = port->sig_comp_iv;
u32 swqe_num = pr->swqe_id_counter;
ehea_xmit3(skb, dev, swqe);
swqe->wr_id = EHEA_BMASK_SET(EHEA_WR_ID_TYPE, EHEA_SWQE3_TYPE)
| EHEA_BMASK_SET(EHEA_WR_ID_COUNT, swqe_num);
if (pr->swqe_ll_count >= (sig_iv - 1)) {
swqe->wr_id |= EHEA_BMASK_SET(EHEA_WR_ID_REFILL,
sig_iv);
swqe->tx_control |= EHEA_SWQE_SIGNALLED_COMPLETION;
pr->swqe_ll_count = 0;
} else
pr->swqe_ll_count += 1;
} else {
swqe->wr_id =
EHEA_BMASK_SET(EHEA_WR_ID_TYPE, EHEA_SWQE2_TYPE)
| EHEA_BMASK_SET(EHEA_WR_ID_COUNT, pr->swqe_id_counter)
| EHEA_BMASK_SET(EHEA_WR_ID_REFILL, 1)
| EHEA_BMASK_SET(EHEA_WR_ID_INDEX, pr->sq_skba.index);
pr->sq_skba.arr[pr->sq_skba.index] = skb;
pr->sq_skba.index++;
pr->sq_skba.index &= (pr->sq_skba.len - 1);
lkey = pr->send_mr.lkey;
ehea_xmit2(skb, dev, swqe, lkey);
swqe->tx_control |= EHEA_SWQE_SIGNALLED_COMPLETION;
}
pr->swqe_id_counter += 1;
if (port->vgrp && vlan_tx_tag_present(skb)) {
swqe->tx_control |= EHEA_SWQE_VLAN_INSERT;
swqe->vlan_tag = vlan_tx_tag_get(skb);
}
if (netif_msg_tx_queued(port)) {
ehea_info("post swqe on QP %d", pr->qp->init_attr.qp_nr);
ehea_dump(swqe, 512, "swqe");
}
if (unlikely(test_bit(__EHEA_STOP_XFER, &ehea_driver_flags)))
goto out;
ehea_post_swqe(pr->qp, swqe);
pr->tx_packets++;
if (unlikely(atomic_read(&pr->swqe_avail) <= 1)) {
spin_lock_irqsave(&pr->netif_queue, flags);
if (unlikely(atomic_read(&pr->swqe_avail) <= 1)) {
pr->p_stats.queue_stopped++;
netif_stop_queue(dev);
pr->queue_stopped = 1;
}
spin_unlock_irqrestore(&pr->netif_queue, flags);
}
dev->trans_start = jiffies;
spin_unlock(&pr->xmit_lock);
out:
return NETDEV_TX_OK;
}
static void ehea_vlan_rx_register(struct net_device *dev,
struct vlan_group *grp)
{
struct ehea_port *port = netdev_priv(dev);
struct ehea_adapter *adapter = port->adapter;
struct hcp_ehea_port_cb1 *cb1;
u64 hret;
port->vgrp = grp;
cb1 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb1) {
ehea_error("no mem for cb1");
goto out;
}
memset(cb1->vlan_filter, 0, sizeof(cb1->vlan_filter));
hret = ehea_h_modify_ehea_port(adapter->handle, port->logical_port_id,
H_PORT_CB1, H_PORT_CB1_ALL, cb1);
if (hret != H_SUCCESS)
ehea_error("modify_ehea_port failed");
kfree(cb1);
out:
return;
}
static void ehea_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
{
struct ehea_port *port = netdev_priv(dev);
struct ehea_adapter *adapter = port->adapter;
struct hcp_ehea_port_cb1 *cb1;
int index;
u64 hret;
cb1 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb1) {
ehea_error("no mem for cb1");
goto out;
}
hret = ehea_h_query_ehea_port(adapter->handle, port->logical_port_id,
H_PORT_CB1, H_PORT_CB1_ALL, cb1);
if (hret != H_SUCCESS) {
ehea_error("query_ehea_port failed");
goto out;
}
index = (vid / 64);
cb1->vlan_filter[index] |= ((u64)(0x8000000000000000 >> (vid & 0x3F)));
hret = ehea_h_modify_ehea_port(adapter->handle, port->logical_port_id,
H_PORT_CB1, H_PORT_CB1_ALL, cb1);
if (hret != H_SUCCESS)
ehea_error("modify_ehea_port failed");
out:
kfree(cb1);
return;
}
static void ehea_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
{
struct ehea_port *port = netdev_priv(dev);
struct ehea_adapter *adapter = port->adapter;
struct hcp_ehea_port_cb1 *cb1;
int index;
u64 hret;
vlan_group_set_device(port->vgrp, vid, NULL);
cb1 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb1) {
ehea_error("no mem for cb1");
goto out;
}
hret = ehea_h_query_ehea_port(adapter->handle, port->logical_port_id,
H_PORT_CB1, H_PORT_CB1_ALL, cb1);
if (hret != H_SUCCESS) {
ehea_error("query_ehea_port failed");
goto out;
}
index = (vid / 64);
cb1->vlan_filter[index] &= ~((u64)(0x8000000000000000 >> (vid & 0x3F)));
hret = ehea_h_modify_ehea_port(adapter->handle, port->logical_port_id,
H_PORT_CB1, H_PORT_CB1_ALL, cb1);
if (hret != H_SUCCESS)
ehea_error("modify_ehea_port failed");
out:
kfree(cb1);
return;
}
int ehea_activate_qp(struct ehea_adapter *adapter, struct ehea_qp *qp)
{
int ret = -EIO;
u64 hret;
u16 dummy16 = 0;
u64 dummy64 = 0;
struct hcp_modify_qp_cb0* cb0;
cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb0) {
ret = -ENOMEM;
goto out;
}
hret = ehea_h_query_ehea_qp(adapter->handle, 0, qp->fw_handle,
EHEA_BMASK_SET(H_QPCB0_ALL, 0xFFFF), cb0);
if (hret != H_SUCCESS) {
ehea_error("query_ehea_qp failed (1)");
goto out;
}
cb0->qp_ctl_reg = H_QP_CR_STATE_INITIALIZED;
hret = ehea_h_modify_ehea_qp(adapter->handle, 0, qp->fw_handle,
EHEA_BMASK_SET(H_QPCB0_QP_CTL_REG, 1), cb0,
&dummy64, &dummy64, &dummy16, &dummy16);
if (hret != H_SUCCESS) {
ehea_error("modify_ehea_qp failed (1)");
goto out;
}
hret = ehea_h_query_ehea_qp(adapter->handle, 0, qp->fw_handle,
EHEA_BMASK_SET(H_QPCB0_ALL, 0xFFFF), cb0);
if (hret != H_SUCCESS) {
ehea_error("query_ehea_qp failed (2)");
goto out;
}
cb0->qp_ctl_reg = H_QP_CR_ENABLED | H_QP_CR_STATE_INITIALIZED;
hret = ehea_h_modify_ehea_qp(adapter->handle, 0, qp->fw_handle,
EHEA_BMASK_SET(H_QPCB0_QP_CTL_REG, 1), cb0,
&dummy64, &dummy64, &dummy16, &dummy16);
if (hret != H_SUCCESS) {
ehea_error("modify_ehea_qp failed (2)");
goto out;
}
hret = ehea_h_query_ehea_qp(adapter->handle, 0, qp->fw_handle,
EHEA_BMASK_SET(H_QPCB0_ALL, 0xFFFF), cb0);
if (hret != H_SUCCESS) {
ehea_error("query_ehea_qp failed (3)");
goto out;
}
cb0->qp_ctl_reg = H_QP_CR_ENABLED | H_QP_CR_STATE_RDY2SND;
hret = ehea_h_modify_ehea_qp(adapter->handle, 0, qp->fw_handle,
EHEA_BMASK_SET(H_QPCB0_QP_CTL_REG, 1), cb0,
&dummy64, &dummy64, &dummy16, &dummy16);
if (hret != H_SUCCESS) {
ehea_error("modify_ehea_qp failed (3)");
goto out;
}
hret = ehea_h_query_ehea_qp(adapter->handle, 0, qp->fw_handle,
EHEA_BMASK_SET(H_QPCB0_ALL, 0xFFFF), cb0);
if (hret != H_SUCCESS) {
ehea_error("query_ehea_qp failed (4)");
goto out;
}
ret = 0;
out:
kfree(cb0);
return ret;
}
static int ehea_port_res_setup(struct ehea_port *port, int def_qps,
int add_tx_qps)
{
int ret, i;
struct port_res_cfg pr_cfg, pr_cfg_small_rx;
enum ehea_eq_type eq_type = EHEA_EQ;
port->qp_eq = ehea_create_eq(port->adapter, eq_type,
EHEA_MAX_ENTRIES_EQ, 1);
if (!port->qp_eq) {
ret = -EINVAL;
ehea_error("ehea_create_eq failed (qp_eq)");
goto out_kill_eq;
}
pr_cfg.max_entries_rcq = rq1_entries + rq2_entries + rq3_entries;
pr_cfg.max_entries_scq = sq_entries * 2;
pr_cfg.max_entries_sq = sq_entries;
pr_cfg.max_entries_rq1 = rq1_entries;
pr_cfg.max_entries_rq2 = rq2_entries;
pr_cfg.max_entries_rq3 = rq3_entries;
pr_cfg_small_rx.max_entries_rcq = 1;
pr_cfg_small_rx.max_entries_scq = sq_entries;
pr_cfg_small_rx.max_entries_sq = sq_entries;
pr_cfg_small_rx.max_entries_rq1 = 1;
pr_cfg_small_rx.max_entries_rq2 = 1;
pr_cfg_small_rx.max_entries_rq3 = 1;
for (i = 0; i < def_qps; i++) {
ret = ehea_init_port_res(port, &port->port_res[i], &pr_cfg, i);
if (ret)
goto out_clean_pr;
}
for (i = def_qps; i < def_qps + add_tx_qps; i++) {
ret = ehea_init_port_res(port, &port->port_res[i],
&pr_cfg_small_rx, i);
if (ret)
goto out_clean_pr;
}
return 0;
out_clean_pr:
while (--i >= 0)
ehea_clean_portres(port, &port->port_res[i]);
out_kill_eq:
ehea_destroy_eq(port->qp_eq);
return ret;
}
static int ehea_clean_all_portres(struct ehea_port *port)
{
int ret = 0;
int i;
for(i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++)
ret |= ehea_clean_portres(port, &port->port_res[i]);
ret |= ehea_destroy_eq(port->qp_eq);
return ret;
}
static void ehea_remove_adapter_mr(struct ehea_adapter *adapter)
{
if (adapter->active_ports)
return;
ehea_rem_mr(&adapter->mr);
}
static int ehea_add_adapter_mr(struct ehea_adapter *adapter)
{
if (adapter->active_ports)
return 0;
return ehea_reg_kernel_mr(adapter, &adapter->mr);
}
static int ehea_up(struct net_device *dev)
{
int ret, i;
struct ehea_port *port = netdev_priv(dev);
if (port->state == EHEA_PORT_UP)
return 0;
ret = ehea_port_res_setup(port, port->num_def_qps,
port->num_add_tx_qps);
if (ret) {
ehea_error("port_res_failed");
goto out;
}
/* Set default QP for this port */
ret = ehea_configure_port(port);
if (ret) {
ehea_error("ehea_configure_port failed. ret:%d", ret);
goto out_clean_pr;
}
ret = ehea_reg_interrupts(dev);
if (ret) {
ehea_error("reg_interrupts failed. ret:%d", ret);
goto out_clean_pr;
}
for(i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
ret = ehea_activate_qp(port->adapter, port->port_res[i].qp);
if (ret) {
ehea_error("activate_qp failed");
goto out_free_irqs;
}
}
for(i = 0; i < port->num_def_qps; i++) {
ret = ehea_fill_port_res(&port->port_res[i]);
if (ret) {
ehea_error("out_free_irqs");
goto out_free_irqs;
}
}
ret = 0;
port->state = EHEA_PORT_UP;
goto out;
out_free_irqs:
ehea_free_interrupts(dev);
out_clean_pr:
ehea_clean_all_portres(port);
out:
if (ret)
ehea_info("Failed starting %s. ret=%i", dev->name, ret);
return ret;
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
static void port_napi_disable(struct ehea_port *port)
{
int i;
for (i = 0; i < port->num_def_qps; i++)
napi_disable(&port->port_res[i].napi);
}
static void port_napi_enable(struct ehea_port *port)
{
int i;
for (i = 0; i < port->num_def_qps; i++)
napi_enable(&port->port_res[i].napi);
}
static int ehea_open(struct net_device *dev)
{
int ret;
struct ehea_port *port = netdev_priv(dev);
down(&port->port_lock);
if (netif_msg_ifup(port))
ehea_info("enabling port %s", dev->name);
ret = ehea_up(dev);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
if (!ret) {
port_napi_enable(port);
netif_start_queue(dev);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
}
up(&port->port_lock);
return ret;
}
static int ehea_down(struct net_device *dev)
{
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
int ret;
struct ehea_port *port = netdev_priv(dev);
if (port->state == EHEA_PORT_DOWN)
return 0;
ehea_drop_multicast_list(dev);
ehea_free_interrupts(dev);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
port_napi_disable(port);
port->state = EHEA_PORT_DOWN;
ret = ehea_clean_all_portres(port);
if (ret)
ehea_info("Failed freeing resources for %s. ret=%i",
dev->name, ret);
return ret;
}
static int ehea_stop(struct net_device *dev)
{
int ret;
struct ehea_port *port = netdev_priv(dev);
if (netif_msg_ifdown(port))
ehea_info("disabling port %s", dev->name);
flush_workqueue(port->adapter->ehea_wq);
down(&port->port_lock);
netif_stop_queue(dev);
ret = ehea_down(dev);
up(&port->port_lock);
return ret;
}
static void ehea_reset_port(struct work_struct *work)
{
int ret;
struct ehea_port *port =
container_of(work, struct ehea_port, reset_task);
struct net_device *dev = port->netdev;
port->resets++;
down(&port->port_lock);
netif_stop_queue(dev);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
port_napi_disable(port);
ehea_down(dev);
ret = ehea_up(dev);
if (ret)
goto out;
if (netif_msg_timer(port))
ehea_info("Device %s resetted successfully", dev->name);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
port_napi_enable(port);
netif_wake_queue(dev);
out:
up(&port->port_lock);
return;
}
static void ehea_rereg_mrs(struct work_struct *work)
{
int ret, i;
struct ehea_adapter *adapter;
ehea_info("LPAR memory enlarged - re-initializing driver");
list_for_each_entry(adapter, &adapter_list, list)
if (adapter->active_ports) {
/* Shutdown all ports */
for (i = 0; i < EHEA_MAX_PORTS; i++) {
struct ehea_port *port = adapter->port[i];
if (port) {
struct net_device *dev = port->netdev;
if (dev->flags & IFF_UP) {
ehea_info("stopping %s",
dev->name);
down(&port->port_lock);
netif_stop_queue(dev);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
port_napi_disable(port);
ehea_down(dev);
up(&port->port_lock);
}
}
}
/* Unregister old memory region */
ret = ehea_rem_mr(&adapter->mr);
if (ret) {
ehea_error("unregister MR failed - driver"
" inoperable!");
goto out;
}
}
ehea_destroy_busmap();
ret = ehea_create_busmap();
if (ret)
goto out;
clear_bit(__EHEA_STOP_XFER, &ehea_driver_flags);
list_for_each_entry(adapter, &adapter_list, list)
if (adapter->active_ports) {
/* Register new memory region */
ret = ehea_reg_kernel_mr(adapter, &adapter->mr);
if (ret) {
ehea_error("register MR failed - driver"
" inoperable!");
goto out;
}
/* Restart all ports */
for (i = 0; i < EHEA_MAX_PORTS; i++) {
struct ehea_port *port = adapter->port[i];
if (port) {
struct net_device *dev = port->netdev;
if (dev->flags & IFF_UP) {
ehea_info("restarting %s",
dev->name);
down(&port->port_lock);
ret = ehea_up(dev);
if (!ret) {
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
port_napi_enable(port);
netif_wake_queue(dev);
}
up(&port->port_lock);
}
}
}
}
out:
return;
}
static void ehea_tx_watchdog(struct net_device *dev)
{
struct ehea_port *port = netdev_priv(dev);
if (netif_carrier_ok(dev))
queue_work(port->adapter->ehea_wq, &port->reset_task);
}
int ehea_sense_adapter_attr(struct ehea_adapter *adapter)
{
struct hcp_query_ehea *cb;
u64 hret;
int ret;
cb = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb) {
ret = -ENOMEM;
goto out;
}
hret = ehea_h_query_ehea(adapter->handle, cb);
if (hret != H_SUCCESS) {
ret = -EIO;
goto out_herr;
}
adapter->max_mc_mac = cb->max_mc_mac - 1;
ret = 0;
out_herr:
kfree(cb);
out:
return ret;
}
int ehea_get_jumboframe_status(struct ehea_port *port, int *jumbo)
{
struct hcp_ehea_port_cb4 *cb4;
u64 hret;
int ret = 0;
*jumbo = 0;
/* (Try to) enable *jumbo frames */
cb4 = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!cb4) {
ehea_error("no mem for cb4");
ret = -ENOMEM;
goto out;
} else {
hret = ehea_h_query_ehea_port(port->adapter->handle,
port->logical_port_id,
H_PORT_CB4,
H_PORT_CB4_JUMBO, cb4);
if (hret == H_SUCCESS) {
if (cb4->jumbo_frame)
*jumbo = 1;
else {
cb4->jumbo_frame = 1;
hret = ehea_h_modify_ehea_port(port->adapter->
handle,
port->
logical_port_id,
H_PORT_CB4,
H_PORT_CB4_JUMBO,
cb4);
if (hret == H_SUCCESS)
*jumbo = 1;
}
} else
ret = -EINVAL;
kfree(cb4);
}
out:
return ret;
}
static ssize_t ehea_show_port_id(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ehea_port *port = container_of(dev, struct ehea_port, ofdev.dev);
return sprintf(buf, "%d", port->logical_port_id);
}
static DEVICE_ATTR(log_port_id, S_IRUSR | S_IRGRP | S_IROTH, ehea_show_port_id,
NULL);
static void __devinit logical_port_release(struct device *dev)
{
struct ehea_port *port = container_of(dev, struct ehea_port, ofdev.dev);
of_node_put(port->ofdev.node);
}
static int ehea_driver_sysfs_add(struct device *dev,
struct device_driver *driver)
{
int ret;
ret = sysfs_create_link(&driver->kobj, &dev->kobj,
kobject_name(&dev->kobj));
if (ret == 0) {
ret = sysfs_create_link(&dev->kobj, &driver->kobj,
"driver");
if (ret)
sysfs_remove_link(&driver->kobj,
kobject_name(&dev->kobj));
}
return ret;
}
static void ehea_driver_sysfs_remove(struct device *dev,
struct device_driver *driver)
{
struct device_driver *drv = driver;
if (drv) {
sysfs_remove_link(&drv->kobj, kobject_name(&dev->kobj));
sysfs_remove_link(&dev->kobj, "driver");
}
}
static struct device *ehea_register_port(struct ehea_port *port,
struct device_node *dn)
{
int ret;
port->ofdev.node = of_node_get(dn);
port->ofdev.dev.parent = &port->adapter->ebus_dev->ofdev.dev;
port->ofdev.dev.bus = &ibmebus_bus_type;
sprintf(port->ofdev.dev.bus_id, "port%d", port_name_cnt++);
port->ofdev.dev.release = logical_port_release;
ret = of_device_register(&port->ofdev);
if (ret) {
ehea_error("failed to register device. ret=%d", ret);
goto out;
}
ret = device_create_file(&port->ofdev.dev, &dev_attr_log_port_id);
if (ret) {
ehea_error("failed to register attributes, ret=%d", ret);
goto out_unreg_of_dev;
}
ret = ehea_driver_sysfs_add(&port->ofdev.dev, &ehea_driver.driver);
if (ret) {
ehea_error("failed to register sysfs driver link");
goto out_rem_dev_file;
}
return &port->ofdev.dev;
out_rem_dev_file:
device_remove_file(&port->ofdev.dev, &dev_attr_log_port_id);
out_unreg_of_dev:
of_device_unregister(&port->ofdev);
out:
return NULL;
}
static void ehea_unregister_port(struct ehea_port *port)
{
ehea_driver_sysfs_remove(&port->ofdev.dev, &ehea_driver.driver);
device_remove_file(&port->ofdev.dev, &dev_attr_log_port_id);
of_device_unregister(&port->ofdev);
}
struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,
u32 logical_port_id,
struct device_node *dn)
{
int ret;
struct net_device *dev;
struct ehea_port *port;
struct device *port_dev;
int jumbo;
/* allocate memory for the port structures */
dev = alloc_etherdev(sizeof(struct ehea_port));
if (!dev) {
ehea_error("no mem for net_device");
ret = -ENOMEM;
goto out_err;
}
port = netdev_priv(dev);
sema_init(&port->port_lock, 1);
port->state = EHEA_PORT_DOWN;
port->sig_comp_iv = sq_entries / 10;
port->adapter = adapter;
port->netdev = dev;
port->logical_port_id = logical_port_id;
port->msg_enable = netif_msg_init(msg_level, EHEA_MSG_DEFAULT);
port->mc_list = kzalloc(sizeof(struct ehea_mc_list), GFP_KERNEL);
if (!port->mc_list) {
ret = -ENOMEM;
goto out_free_ethdev;
}
INIT_LIST_HEAD(&port->mc_list->list);
ret = ehea_sense_port_attr(port);
if (ret)
goto out_free_mc_list;
port_dev = ehea_register_port(port, dn);
if (!port_dev)
goto out_free_mc_list;
SET_NETDEV_DEV(dev, port_dev);
/* initialize net_device structure */
memcpy(dev->dev_addr, &port->mac_addr, ETH_ALEN);
dev->open = ehea_open;
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = ehea_netpoll;
#endif
dev->stop = ehea_stop;
dev->hard_start_xmit = ehea_start_xmit;
dev->get_stats = ehea_get_stats;
dev->set_multicast_list = ehea_set_multicast_list;
dev->set_mac_address = ehea_set_mac_addr;
dev->change_mtu = ehea_change_mtu;
dev->vlan_rx_register = ehea_vlan_rx_register;
dev->vlan_rx_add_vid = ehea_vlan_rx_add_vid;
dev->vlan_rx_kill_vid = ehea_vlan_rx_kill_vid;
dev->features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_TSO
| NETIF_F_HIGHDMA | NETIF_F_HW_CSUM | NETIF_F_HW_VLAN_TX
| NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER
| NETIF_F_LLTX;
dev->tx_timeout = &ehea_tx_watchdog;
dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT;
INIT_WORK(&port->reset_task, ehea_reset_port);
ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
if (ret) {
ret = -EIO;
goto out_unreg_port;
}
ehea_set_ethtool_ops(dev);
ret = register_netdev(dev);
if (ret) {
ehea_error("register_netdev failed. ret=%d", ret);
goto out_dereg_bc;
}
port->lro_max_aggr = lro_max_aggr;
ret = ehea_get_jumboframe_status(port, &jumbo);
if (ret)
ehea_error("failed determining jumbo frame status for %s",
port->netdev->name);
ehea_info("%s: Jumbo frames are %sabled", dev->name,
jumbo == 1 ? "en" : "dis");
adapter->active_ports++;
return port;
out_dereg_bc:
ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
out_unreg_port:
ehea_unregister_port(port);
out_free_mc_list:
kfree(port->mc_list);
out_free_ethdev:
free_netdev(dev);
out_err:
ehea_error("setting up logical port with id=%d failed, ret=%d",
logical_port_id, ret);
return NULL;
}
static void ehea_shutdown_single_port(struct ehea_port *port)
{
unregister_netdev(port->netdev);
ehea_unregister_port(port);
ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
kfree(port->mc_list);
free_netdev(port->netdev);
port->adapter->active_ports--;
}
static int ehea_setup_ports(struct ehea_adapter *adapter)
{
struct device_node *lhea_dn;
struct device_node *eth_dn = NULL;
const u32 *dn_log_port_id;
int i = 0;
lhea_dn = adapter->ebus_dev->ofdev.node;
while ((eth_dn = of_get_next_child(lhea_dn, eth_dn))) {
dn_log_port_id = of_get_property(eth_dn, "ibm,hea-port-no",
NULL);
if (!dn_log_port_id) {
ehea_error("bad device node: eth_dn name=%s",
eth_dn->full_name);
continue;
}
if (ehea_add_adapter_mr(adapter)) {
ehea_error("creating MR failed");
of_node_put(eth_dn);
return -EIO;
}
adapter->port[i] = ehea_setup_single_port(adapter,
*dn_log_port_id,
eth_dn);
if (adapter->port[i])
ehea_info("%s -> logical port id #%d",
adapter->port[i]->netdev->name,
*dn_log_port_id);
else
ehea_remove_adapter_mr(adapter);
i++;
};
return 0;
}
static struct device_node *ehea_get_eth_dn(struct ehea_adapter *adapter,
u32 logical_port_id)
{
struct device_node *lhea_dn;
struct device_node *eth_dn = NULL;
const u32 *dn_log_port_id;
lhea_dn = adapter->ebus_dev->ofdev.node;
while ((eth_dn = of_get_next_child(lhea_dn, eth_dn))) {
dn_log_port_id = of_get_property(eth_dn, "ibm,hea-port-no",
NULL);
if (dn_log_port_id)
if (*dn_log_port_id == logical_port_id)
return eth_dn;
};
return NULL;
}
static ssize_t ehea_probe_port(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct ehea_adapter *adapter = dev->driver_data;
struct ehea_port *port;
struct device_node *eth_dn = NULL;
int i;
u32 logical_port_id;
sscanf(buf, "%d", &logical_port_id);
port = ehea_get_port(adapter, logical_port_id);
if (port) {
ehea_info("adding port with logical port id=%d failed. port "
"already configured as %s.", logical_port_id,
port->netdev->name);
return -EINVAL;
}
eth_dn = ehea_get_eth_dn(adapter, logical_port_id);
if (!eth_dn) {
ehea_info("no logical port with id %d found", logical_port_id);
return -EINVAL;
}
if (ehea_add_adapter_mr(adapter)) {
ehea_error("creating MR failed");
return -EIO;
}
port = ehea_setup_single_port(adapter, logical_port_id, eth_dn);
of_node_put(eth_dn);
if (port) {
for (i=0; i < EHEA_MAX_PORTS; i++)
if (!adapter->port[i]) {
adapter->port[i] = port;
break;
}
ehea_info("added %s (logical port id=%d)", port->netdev->name,
logical_port_id);
} else {
ehea_remove_adapter_mr(adapter);
return -EIO;
}
return (ssize_t) count;
}
static ssize_t ehea_remove_port(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct ehea_adapter *adapter = dev->driver_data;
struct ehea_port *port;
int i;
u32 logical_port_id;
sscanf(buf, "%d", &logical_port_id);
port = ehea_get_port(adapter, logical_port_id);
if (port) {
ehea_info("removed %s (logical port id=%d)", port->netdev->name,
logical_port_id);
ehea_shutdown_single_port(port);
for (i=0; i < EHEA_MAX_PORTS; i++)
if (adapter->port[i] == port) {
adapter->port[i] = NULL;
break;
}
} else {
ehea_error("removing port with logical port id=%d failed. port "
"not configured.", logical_port_id);
return -EINVAL;
}
ehea_remove_adapter_mr(adapter);
return (ssize_t) count;
}
static DEVICE_ATTR(probe_port, S_IWUSR, NULL, ehea_probe_port);
static DEVICE_ATTR(remove_port, S_IWUSR, NULL, ehea_remove_port);
int ehea_create_device_sysfs(struct ibmebus_dev *dev)
{
int ret = device_create_file(&dev->ofdev.dev, &dev_attr_probe_port);
if (ret)
goto out;
ret = device_create_file(&dev->ofdev.dev, &dev_attr_remove_port);
out:
return ret;
}
void ehea_remove_device_sysfs(struct ibmebus_dev *dev)
{
device_remove_file(&dev->ofdev.dev, &dev_attr_probe_port);
device_remove_file(&dev->ofdev.dev, &dev_attr_remove_port);
}
static int __devinit ehea_probe_adapter(struct ibmebus_dev *dev,
const struct of_device_id *id)
{
struct ehea_adapter *adapter;
const u64 *adapter_handle;
int ret;
if (!dev || !dev->ofdev.node) {
ehea_error("Invalid ibmebus device probed");
return -EINVAL;
}
adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
if (!adapter) {
ret = -ENOMEM;
dev_err(&dev->ofdev.dev, "no mem for ehea_adapter\n");
goto out;
}
list_add(&adapter->list, &adapter_list);
adapter->ebus_dev = dev;
adapter_handle = of_get_property(dev->ofdev.node, "ibm,hea-handle",
NULL);
if (adapter_handle)
adapter->handle = *adapter_handle;
if (!adapter->handle) {
dev_err(&dev->ofdev.dev, "failed getting handle for adapter"
" '%s'\n", dev->ofdev.node->full_name);
ret = -ENODEV;
goto out_free_ad;
}
adapter->pd = EHEA_PD_ID;
dev->ofdev.dev.driver_data = adapter;
/* initialize adapter and ports */
/* get adapter properties */
ret = ehea_sense_adapter_attr(adapter);
if (ret) {
dev_err(&dev->ofdev.dev, "sense_adapter_attr failed: %d", ret);
goto out_free_ad;
}
adapter->neq = ehea_create_eq(adapter,
EHEA_NEQ, EHEA_MAX_ENTRIES_EQ, 1);
if (!adapter->neq) {
ret = -EIO;
dev_err(&dev->ofdev.dev, "NEQ creation failed");
goto out_free_ad;
}
tasklet_init(&adapter->neq_tasklet, ehea_neq_tasklet,
(unsigned long)adapter);
ret = ibmebus_request_irq(NULL, adapter->neq->attr.ist1,
ehea_interrupt_neq, IRQF_DISABLED,
"ehea_neq", adapter);
if (ret) {
dev_err(&dev->ofdev.dev, "requesting NEQ IRQ failed");
goto out_kill_eq;
}
adapter->ehea_wq = create_workqueue("ehea_wq");
if (!adapter->ehea_wq) {
ret = -EIO;
goto out_free_irq;
}
ret = ehea_create_device_sysfs(dev);
if (ret)
goto out_kill_wq;
ret = ehea_setup_ports(adapter);
if (ret) {
dev_err(&dev->ofdev.dev, "setup_ports failed");
goto out_rem_dev_sysfs;
}
ret = 0;
goto out;
out_rem_dev_sysfs:
ehea_remove_device_sysfs(dev);
out_kill_wq:
destroy_workqueue(adapter->ehea_wq);
out_free_irq:
ibmebus_free_irq(NULL, adapter->neq->attr.ist1, adapter);
out_kill_eq:
ehea_destroy_eq(adapter->neq);
out_free_ad:
kfree(adapter);
out:
return ret;
}
static int __devexit ehea_remove(struct ibmebus_dev *dev)
{
struct ehea_adapter *adapter = dev->ofdev.dev.driver_data;
int i;
for (i = 0; i < EHEA_MAX_PORTS; i++)
if (adapter->port[i]) {
ehea_shutdown_single_port(adapter->port[i]);
adapter->port[i] = NULL;
}
ehea_remove_device_sysfs(dev);
destroy_workqueue(adapter->ehea_wq);
ibmebus_free_irq(NULL, adapter->neq->attr.ist1, adapter);
tasklet_kill(&adapter->neq_tasklet);
ehea_destroy_eq(adapter->neq);
ehea_remove_adapter_mr(adapter);
list_del(&adapter->list);
kfree(adapter);
return 0;
}
static int check_module_parm(void)
{
int ret = 0;
if ((rq1_entries < EHEA_MIN_ENTRIES_QP) ||
(rq1_entries > EHEA_MAX_ENTRIES_RQ1)) {
ehea_info("Bad parameter: rq1_entries");
ret = -EINVAL;
}
if ((rq2_entries < EHEA_MIN_ENTRIES_QP) ||
(rq2_entries > EHEA_MAX_ENTRIES_RQ2)) {
ehea_info("Bad parameter: rq2_entries");
ret = -EINVAL;
}
if ((rq3_entries < EHEA_MIN_ENTRIES_QP) ||
(rq3_entries > EHEA_MAX_ENTRIES_RQ3)) {
ehea_info("Bad parameter: rq3_entries");
ret = -EINVAL;
}
if ((sq_entries < EHEA_MIN_ENTRIES_QP) ||
(sq_entries > EHEA_MAX_ENTRIES_SQ)) {
ehea_info("Bad parameter: sq_entries");
ret = -EINVAL;
}
return ret;
}
static ssize_t ehea_show_capabilities(struct device_driver *drv,
char *buf)
{
return sprintf(buf, "%d", EHEA_CAPABILITIES);
}
static DRIVER_ATTR(capabilities, S_IRUSR | S_IRGRP | S_IROTH,
ehea_show_capabilities, NULL);
int __init ehea_module_init(void)
{
int ret;
printk(KERN_INFO "IBM eHEA ethernet device driver (Release %s)\n",
DRV_VERSION);
ehea_driver_wq = create_workqueue("ehea_driver_wq");
INIT_WORK(&ehea_rereg_mr_task, ehea_rereg_mrs);
ret = check_module_parm();
if (ret)
goto out;
ret = ehea_create_busmap();
if (ret)
goto out;
ret = ibmebus_register_driver(&ehea_driver);
if (ret) {
ehea_error("failed registering eHEA device driver on ebus");
goto out;
}
ret = driver_create_file(&ehea_driver.driver,
&driver_attr_capabilities);
if (ret) {
ehea_error("failed to register capabilities attribute, ret=%d",
ret);
ibmebus_unregister_driver(&ehea_driver);
goto out;
}
out:
return ret;
}
static void __exit ehea_module_exit(void)
{
destroy_workqueue(ehea_driver_wq);
driver_remove_file(&ehea_driver.driver, &driver_attr_capabilities);
ibmebus_unregister_driver(&ehea_driver);
ehea_destroy_busmap();
}
module_init(ehea_module_init);
module_exit(ehea_module_exit);