linux_old1/arch/x86/boot/compressed/head_32.S

/*
 *  linux/boot/head.S
 *
 *  Copyright (C) 1991, 1992, 1993  Linus Torvalds
 */

/*
 *  head.S contains the 32-bit startup code.
 *
 * NOTE!!! Startup happens at absolute address 0x00001000, which is also where
 * the page directory will exist. The startup code will be overwritten by
 * the page directory. [According to comments etc elsewhere on a compressed
 * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
 *
 * Page 0 is deliberately kept safe, since System Management Mode code in
 * laptops may need to access the BIOS data stored there.  This is also
 * useful for future device drivers that either access the BIOS via VM86
 * mode.
 */

/*
 * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
 */
	.text

#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/page_types.h>
#include <asm/boot.h>
#include <asm/asm-offsets.h>

	.section ".text.head","ax",@progbits
ENTRY(startup_32)
	cld
	/*
	 * Test KEEP_SEGMENTS flag to see if the bootloader is asking
	 * us to not reload segments
	 */
	testb	$(1<<6), BP_loadflags(%esi)
	jnz	1f

	cli
	movl	$__BOOT_DS, %eax
	movl	%eax, %ds
	movl	%eax, %es
	movl	%eax, %fs
	movl	%eax, %gs
	movl	%eax, %ss
1:

/*
 * Calculate the delta between where we were compiled to run
 * at and where we were actually loaded at.  This can only be done
 * with a short local call on x86.  Nothing  else will tell us what
 * address we are running at.  The reserved chunk of the real-mode
 * data at 0x1e4 (defined as a scratch field) are used as the stack
 * for this calculation. Only 4 bytes are needed.
 */
	leal	(BP_scratch+4)(%esi), %esp
	call	1f
1:	popl	%ebp
	subl	$1b, %ebp

/*
 * %ebp contains the address we are loaded at by the boot loader and %ebx
 * contains the address where we should move the kernel image temporarily
 * for safe in-place decompression.
 */

#ifdef CONFIG_RELOCATABLE
	movl	%ebp, %ebx
	addl    $(CONFIG_PHYSICAL_ALIGN - 1), %ebx
	andl    $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx
#else
	movl	$LOAD_PHYSICAL_ADDR, %ebx
#endif

	/* Replace the compressed data size with the uncompressed size */
	subl	input_len(%ebp), %ebx
	movl	output_len(%ebp), %eax
	addl	%eax, %ebx
	/* Add 8 bytes for every 32K input block */
	shrl	$12, %eax
	addl	%eax, %ebx
	/* Add 32K + 18 bytes of extra slack */
	addl	$(32768 + 18), %ebx
	/* Align on a 4K boundary */
	addl	$4095, %ebx
	andl	$~4095, %ebx

	/* Set up the stack */
	leal	boot_stack_end(%ebx), %esp

/*
 * Copy the compressed kernel to the end of our buffer
 * where decompression in place becomes safe.
 */
	pushl	%esi
	leal	_bss(%ebp), %esi
	leal	_bss(%ebx), %edi
	movl	$(_bss - startup_32), %ecx
	std
	rep	movsb
	cld
	popl	%esi

/*
 * Compute the kernel start address.
 */
#ifdef CONFIG_RELOCATABLE
	addl    $(CONFIG_PHYSICAL_ALIGN - 1), %ebp
	andl    $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp
#else
	movl	$LOAD_PHYSICAL_ADDR, %ebp
#endif

/*
 * Jump to the relocated address.
 */
	leal	relocated(%ebx), %eax
	jmp	*%eax
ENDPROC(startup_32)

	.text
relocated:

/*
 * Clear BSS (stack is currently empty)
 */
	xorl	%eax, %eax
	leal	_bss(%ebx), %edi
	leal	_ebss(%ebx), %ecx
	subl	%edi, %ecx
	cld
	rep	stosb

/*
 * Do the decompression, and jump to the new kernel..
 */
	movl	output_len(%ebx), %eax
	pushl	%eax
				/* push arguments for decompress_kernel: */
	pushl	%ebp		/* output address */
	movl	input_len(%ebx), %eax
	pushl	%eax		/* input_len */
	leal	input_data(%ebx), %eax
	pushl	%eax		/* input_data */
	leal	boot_heap(%ebx), %eax
	pushl	%eax		/* heap area */
	pushl	%esi		/* real mode pointer */
	call	decompress_kernel
	addl	$20, %esp
	popl	%ecx

#if CONFIG_RELOCATABLE
/*
 * Find the address of the relocations.
 */
	movl	%ebp, %edi
	addl	%ecx, %edi

/*
 * Calculate the delta between where vmlinux was compiled to run
 * and where it was actually loaded.
 */
	movl	%ebp, %ebx
	subl	$LOAD_PHYSICAL_ADDR, %ebx
	jz	2f	/* Nothing to be done if loaded at compiled addr. */
/*
 * Process relocations.
 */

1:	subl	$4, %edi
	movl	(%edi), %ecx
	testl	%ecx, %ecx
	jz	2f
	addl	%ebx, -__PAGE_OFFSET(%ebx, %ecx)
	jmp	1b
2:
#endif

/*
 * Jump to the decompressed kernel.
 */
	xorl	%ebx, %ebx
	jmp	*%ebp

/*
 * Stack and heap for uncompression
 */
	.bss
	.balign 4
boot_heap:
	.fill BOOT_HEAP_SIZE, 1, 0
boot_stack:
	.fill BOOT_STACK_SIZE, 1, 0
boot_stack_end: