2007-11-16 02:09:02 +08:00
|
|
|
/* bnx2x_reg.h: Broadcom Everest network driver.
|
|
|
|
|
*
|
2010-10-06 11:28:26 +08:00
|
|
|
* Copyright (c) 2007-2010 Broadcom Corporation
|
2007-11-16 02:09:02 +08:00
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
|
* the Free Software Foundation.
|
|
|
|
|
*
|
2008-08-14 06:59:08 +08:00
|
|
|
* The registers description starts with the register Access type followed
|
2007-11-16 02:09:02 +08:00
|
|
|
* by size in bits. For example [RW 32]. The access types are:
|
|
|
|
|
* R - Read only
|
|
|
|
|
* RC - Clear on read
|
|
|
|
|
* RW - Read/Write
|
|
|
|
|
* ST - Statistics register (clear on read)
|
|
|
|
|
* W - Write only
|
|
|
|
|
* WB - Wide bus register - the size is over 32 bits and it should be
|
|
|
|
|
* read/write in consecutive 32 bits accesses
|
|
|
|
|
* WR - Write Clear (write 1 to clear the bit)
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
2010-10-06 11:28:26 +08:00
|
|
|
#define ATC_ATC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
|
|
|
|
|
#define ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS (0x1<<2)
|
|
|
|
|
#define ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU (0x1<<5)
|
|
|
|
|
#define ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT (0x1<<3)
|
|
|
|
|
#define ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR (0x1<<4)
|
|
|
|
|
#define ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND (0x1<<1)
|
|
|
|
|
/* [RW 1] Initiate the ATC array - reset all the valid bits */
|
|
|
|
|
#define ATC_REG_ATC_INIT_ARRAY 0x1100b8
|
|
|
|
|
/* [R 1] ATC initalization done */
|
|
|
|
|
#define ATC_REG_ATC_INIT_DONE 0x1100bc
|
|
|
|
|
/* [RC 6] Interrupt register #0 read clear */
|
|
|
|
|
#define ATC_REG_ATC_INT_STS_CLR 0x1101c0
|
|
|
|
|
/* [RW 19] Interrupt mask register #0 read/write */
|
|
|
|
|
#define BRB1_REG_BRB1_INT_MASK 0x60128
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 19] Interrupt register #0 read */
|
|
|
|
|
#define BRB1_REG_BRB1_INT_STS 0x6011c
|
|
|
|
|
/* [RW 4] Parity mask register #0 read/write */
|
|
|
|
|
#define BRB1_REG_BRB1_PRTY_MASK 0x60138
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 4] Parity register #0 read */
|
|
|
|
|
#define BRB1_REG_BRB1_PRTY_STS 0x6012c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
|
2010-10-06 11:28:26 +08:00
|
|
|
* address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
|
|
|
|
|
* BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. Warning -
|
|
|
|
|
* following reset the first rbc access to this reg must be write; there can
|
|
|
|
|
* be no more rbc writes after the first one; there can be any number of rbc
|
|
|
|
|
* read following the first write; rbc access not following these rules will
|
|
|
|
|
* result in hang condition. */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define BRB1_REG_FREE_LIST_PRS_CRDT 0x60200
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [RW 10] The number of free blocks below which the full signal to class 0
|
|
|
|
|
* is asserted */
|
|
|
|
|
#define BRB1_REG_FULL_0_XOFF_THRESHOLD_0 0x601d0
|
|
|
|
|
/* [RW 10] The number of free blocks above which the full signal to class 0
|
|
|
|
|
* is de-asserted */
|
|
|
|
|
#define BRB1_REG_FULL_0_XON_THRESHOLD_0 0x601d4
|
|
|
|
|
/* [RW 10] The number of free blocks below which the full signal to class 1
|
|
|
|
|
* is asserted */
|
|
|
|
|
#define BRB1_REG_FULL_1_XOFF_THRESHOLD_0 0x601d8
|
|
|
|
|
/* [RW 10] The number of free blocks above which the full signal to class 1
|
|
|
|
|
* is de-asserted */
|
|
|
|
|
#define BRB1_REG_FULL_1_XON_THRESHOLD_0 0x601dc
|
|
|
|
|
/* [RW 10] The number of free blocks below which the full signal to the LB
|
|
|
|
|
* port is asserted */
|
|
|
|
|
#define BRB1_REG_FULL_LB_XOFF_THRESHOLD 0x601e0
|
|
|
|
|
/* [RW 10] The number of free blocks above which the full signal to the LB
|
|
|
|
|
* port is de-asserted */
|
|
|
|
|
#define BRB1_REG_FULL_LB_XON_THRESHOLD 0x601e4
|
2009-02-12 16:36:43 +08:00
|
|
|
/* [RW 10] The number of free blocks above which the High_llfc signal to
|
|
|
|
|
interface #n is de-asserted. */
|
|
|
|
|
#define BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD_0 0x6014c
|
|
|
|
|
/* [RW 10] The number of free blocks below which the High_llfc signal to
|
|
|
|
|
interface #n is asserted. */
|
|
|
|
|
#define BRB1_REG_HIGH_LLFC_LOW_THRESHOLD_0 0x6013c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 23] LL RAM data. */
|
|
|
|
|
#define BRB1_REG_LL_RAM 0x61000
|
2009-02-12 16:36:43 +08:00
|
|
|
/* [RW 10] The number of free blocks above which the Low_llfc signal to
|
|
|
|
|
interface #n is de-asserted. */
|
|
|
|
|
#define BRB1_REG_LOW_LLFC_HIGH_THRESHOLD_0 0x6016c
|
|
|
|
|
/* [RW 10] The number of free blocks below which the Low_llfc signal to
|
|
|
|
|
interface #n is asserted. */
|
|
|
|
|
#define BRB1_REG_LOW_LLFC_LOW_THRESHOLD_0 0x6015c
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [RW 10] The number of blocks guarantied for the MAC port */
|
|
|
|
|
#define BRB1_REG_MAC_GUARANTIED_0 0x601e8
|
|
|
|
|
#define BRB1_REG_MAC_GUARANTIED_1 0x60240
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 24] The number of full blocks. */
|
|
|
|
|
#define BRB1_REG_NUM_OF_FULL_BLOCKS 0x60090
|
|
|
|
|
/* [ST 32] The number of cycles that the write_full signal towards MAC #0
|
|
|
|
|
was asserted. */
|
|
|
|
|
#define BRB1_REG_NUM_OF_FULL_CYCLES_0 0x600c8
|
|
|
|
|
#define BRB1_REG_NUM_OF_FULL_CYCLES_1 0x600cc
|
|
|
|
|
#define BRB1_REG_NUM_OF_FULL_CYCLES_4 0x600d8
|
|
|
|
|
/* [ST 32] The number of cycles that the pause signal towards MAC #0 was
|
|
|
|
|
asserted. */
|
|
|
|
|
#define BRB1_REG_NUM_OF_PAUSE_CYCLES_0 0x600b8
|
|
|
|
|
#define BRB1_REG_NUM_OF_PAUSE_CYCLES_1 0x600bc
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [RW 10] The number of free blocks below which the pause signal to class 0
|
|
|
|
|
* is asserted */
|
|
|
|
|
#define BRB1_REG_PAUSE_0_XOFF_THRESHOLD_0 0x601c0
|
|
|
|
|
/* [RW 10] The number of free blocks above which the pause signal to class 0
|
|
|
|
|
* is de-asserted */
|
|
|
|
|
#define BRB1_REG_PAUSE_0_XON_THRESHOLD_0 0x601c4
|
|
|
|
|
/* [RW 10] The number of free blocks below which the pause signal to class 1
|
|
|
|
|
* is asserted */
|
|
|
|
|
#define BRB1_REG_PAUSE_1_XOFF_THRESHOLD_0 0x601c8
|
|
|
|
|
/* [RW 10] The number of free blocks above which the pause signal to class 1
|
|
|
|
|
* is de-asserted */
|
|
|
|
|
#define BRB1_REG_PAUSE_1_XON_THRESHOLD_0 0x601cc
|
|
|
|
|
/* [RW 10] Write client 0: De-assert pause threshold. Not Functional */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 0x60078
|
|
|
|
|
#define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 0x6007c
|
|
|
|
|
/* [RW 10] Write client 0: Assert pause threshold. */
|
|
|
|
|
#define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068
|
|
|
|
|
#define BRB1_REG_PAUSE_LOW_THRESHOLD_1 0x6006c
|
2008-08-14 06:59:08 +08:00
|
|
|
/* [R 24] The number of full blocks occupied by port. */
|
2008-06-24 11:33:01 +08:00
|
|
|
#define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 0x60094
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Reset the design by software. */
|
|
|
|
|
#define BRB1_REG_SOFT_RESET 0x600dc
|
|
|
|
|
/* [R 5] Used to read the value of the XX protection CAM occupancy counter. */
|
|
|
|
|
#define CCM_REG_CAM_OCCUP 0xd0188
|
|
|
|
|
/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define CCM_REG_CCM_CFC_IFEN 0xd003c
|
|
|
|
|
/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
|
|
|
|
|
disregarded; valid is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define CCM_REG_CCM_CQM_IFEN 0xd000c
|
|
|
|
|
/* [RW 1] If set the Q index; received from the QM is inserted to event ID.
|
|
|
|
|
Otherwise 0 is inserted. */
|
|
|
|
|
#define CCM_REG_CCM_CQM_USE_Q 0xd00c0
|
|
|
|
|
/* [RW 11] Interrupt mask register #0 read/write */
|
|
|
|
|
#define CCM_REG_CCM_INT_MASK 0xd01e4
|
|
|
|
|
/* [R 11] Interrupt register #0 read */
|
|
|
|
|
#define CCM_REG_CCM_INT_STS 0xd01d8
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 27] Parity register #0 read */
|
|
|
|
|
#define CCM_REG_CCM_PRTY_STS 0xd01e8
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
|
|
|
|
|
REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
|
|
|
|
|
Is used to determine the number of the AG context REG-pairs written back;
|
|
|
|
|
when the input message Reg1WbFlg isn't set. */
|
|
|
|
|
#define CCM_REG_CCM_REG0_SZ 0xd00c4
|
|
|
|
|
/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
|
|
|
|
|
disregarded; valid is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define CCM_REG_CCM_STORM0_IFEN 0xd0004
|
|
|
|
|
/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
|
|
|
|
|
disregarded; valid is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define CCM_REG_CCM_STORM1_IFEN 0xd0008
|
|
|
|
|
/* [RW 1] CDU AG read Interface enable. If 0 - the request input is
|
|
|
|
|
disregarded; valid output is deasserted; all other signals are treated as
|
|
|
|
|
usual; if 1 - normal activity. */
|
|
|
|
|
#define CCM_REG_CDU_AG_RD_IFEN 0xd0030
|
|
|
|
|
/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
|
|
|
|
|
are disregarded; all other signals are treated as usual; if 1 - normal
|
|
|
|
|
activity. */
|
|
|
|
|
#define CCM_REG_CDU_AG_WR_IFEN 0xd002c
|
|
|
|
|
/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
|
|
|
|
|
disregarded; valid output is deasserted; all other signals are treated as
|
|
|
|
|
usual; if 1 - normal activity. */
|
|
|
|
|
#define CCM_REG_CDU_SM_RD_IFEN 0xd0038
|
|
|
|
|
/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
|
|
|
|
|
input is disregarded; all other signals are treated as usual; if 1 -
|
|
|
|
|
normal activity. */
|
|
|
|
|
#define CCM_REG_CDU_SM_WR_IFEN 0xd0034
|
|
|
|
|
/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
|
|
|
|
|
the initial credit value; read returns the current value of the credit
|
|
|
|
|
counter. Must be initialized to 1 at start-up. */
|
|
|
|
|
#define CCM_REG_CFC_INIT_CRD 0xd0204
|
|
|
|
|
/* [RW 2] Auxillary counter flag Q number 1. */
|
|
|
|
|
#define CCM_REG_CNT_AUX1_Q 0xd00c8
|
|
|
|
|
/* [RW 2] Auxillary counter flag Q number 2. */
|
|
|
|
|
#define CCM_REG_CNT_AUX2_Q 0xd00cc
|
|
|
|
|
/* [RW 28] The CM header value for QM request (primary). */
|
|
|
|
|
#define CCM_REG_CQM_CCM_HDR_P 0xd008c
|
|
|
|
|
/* [RW 28] The CM header value for QM request (secondary). */
|
|
|
|
|
#define CCM_REG_CQM_CCM_HDR_S 0xd0090
|
|
|
|
|
/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define CCM_REG_CQM_CCM_IFEN 0xd0014
|
|
|
|
|
/* [RW 6] QM output initial credit. Max credit available - 32. Write writes
|
|
|
|
|
the initial credit value; read returns the current value of the credit
|
|
|
|
|
counter. Must be initialized to 32 at start-up. */
|
|
|
|
|
#define CCM_REG_CQM_INIT_CRD 0xd020c
|
|
|
|
|
/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
|
|
|
|
|
stands for weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define CCM_REG_CQM_P_WEIGHT 0xd00b8
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
|
|
|
|
|
stands for weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define CCM_REG_CQM_S_WEIGHT 0xd00bc
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define CCM_REG_CSDM_IFEN 0xd0018
|
|
|
|
|
/* [RC 1] Set when the message length mismatch (relative to last indication)
|
|
|
|
|
at the SDM interface is detected. */
|
|
|
|
|
#define CCM_REG_CSDM_LENGTH_MIS 0xd0170
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define CCM_REG_CSDM_WEIGHT 0xd00b4
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 28] The CM header for QM formatting in case of an error in the QM
|
|
|
|
|
inputs. */
|
|
|
|
|
#define CCM_REG_ERR_CCM_HDR 0xd0094
|
|
|
|
|
/* [RW 8] The Event ID in case the input message ErrorFlg is set. */
|
|
|
|
|
#define CCM_REG_ERR_EVNT_ID 0xd0098
|
|
|
|
|
/* [RW 8] FIC0 output initial credit. Max credit available - 255. Write
|
|
|
|
|
writes the initial credit value; read returns the current value of the
|
|
|
|
|
credit counter. Must be initialized to 64 at start-up. */
|
|
|
|
|
#define CCM_REG_FIC0_INIT_CRD 0xd0210
|
|
|
|
|
/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
|
|
|
|
|
writes the initial credit value; read returns the current value of the
|
|
|
|
|
credit counter. Must be initialized to 64 at start-up. */
|
|
|
|
|
#define CCM_REG_FIC1_INIT_CRD 0xd0214
|
|
|
|
|
/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
|
|
|
|
|
- strict priority defined by ~ccm_registers_gr_ag_pr.gr_ag_pr;
|
|
|
|
|
~ccm_registers_gr_ld0_pr.gr_ld0_pr and
|
|
|
|
|
~ccm_registers_gr_ld1_pr.gr_ld1_pr. Groups are according to channels and
|
|
|
|
|
outputs to STORM: aggregation; load FIC0; load FIC1 and store. */
|
|
|
|
|
#define CCM_REG_GR_ARB_TYPE 0xd015c
|
|
|
|
|
/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
|
|
|
|
|
highest priority is 3. It is supposed; that the Store channel priority is
|
|
|
|
|
the compliment to 4 of the rest priorities - Aggregation channel; Load
|
|
|
|
|
(FIC0) channel and Load (FIC1). */
|
|
|
|
|
#define CCM_REG_GR_LD0_PR 0xd0164
|
|
|
|
|
/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
|
|
|
|
|
highest priority is 3. It is supposed; that the Store channel priority is
|
|
|
|
|
the compliment to 4 of the rest priorities - Aggregation channel; Load
|
|
|
|
|
(FIC0) channel and Load (FIC1). */
|
|
|
|
|
#define CCM_REG_GR_LD1_PR 0xd0168
|
|
|
|
|
/* [RW 2] General flags index. */
|
|
|
|
|
#define CCM_REG_INV_DONE_Q 0xd0108
|
|
|
|
|
/* [RW 4] The number of double REG-pairs(128 bits); loaded from the STORM
|
|
|
|
|
context and sent to STORM; for a specific connection type. The double
|
|
|
|
|
REG-pairs are used in order to align to STORM context row size of 128
|
|
|
|
|
bits. The offset of these data in the STORM context is always 0. Index
|
|
|
|
|
_(0..15) stands for the connection type (one of 16). */
|
|
|
|
|
#define CCM_REG_N_SM_CTX_LD_0 0xd004c
|
|
|
|
|
#define CCM_REG_N_SM_CTX_LD_1 0xd0050
|
|
|
|
|
#define CCM_REG_N_SM_CTX_LD_2 0xd0054
|
|
|
|
|
#define CCM_REG_N_SM_CTX_LD_3 0xd0058
|
|
|
|
|
#define CCM_REG_N_SM_CTX_LD_4 0xd005c
|
|
|
|
|
/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define CCM_REG_PBF_IFEN 0xd0028
|
|
|
|
|
/* [RC 1] Set when the message length mismatch (relative to last indication)
|
|
|
|
|
at the pbf interface is detected. */
|
|
|
|
|
#define CCM_REG_PBF_LENGTH_MIS 0xd0180
|
|
|
|
|
/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define CCM_REG_PBF_WEIGHT 0xd00ac
|
|
|
|
|
#define CCM_REG_PHYS_QNUM1_0 0xd0134
|
|
|
|
|
#define CCM_REG_PHYS_QNUM1_1 0xd0138
|
|
|
|
|
#define CCM_REG_PHYS_QNUM2_0 0xd013c
|
|
|
|
|
#define CCM_REG_PHYS_QNUM2_1 0xd0140
|
|
|
|
|
#define CCM_REG_PHYS_QNUM3_0 0xd0144
|
2008-06-24 11:27:52 +08:00
|
|
|
#define CCM_REG_PHYS_QNUM3_1 0xd0148
|
2007-11-16 02:09:02 +08:00
|
|
|
#define CCM_REG_QOS_PHYS_QNUM0_0 0xd0114
|
|
|
|
|
#define CCM_REG_QOS_PHYS_QNUM0_1 0xd0118
|
|
|
|
|
#define CCM_REG_QOS_PHYS_QNUM1_0 0xd011c
|
|
|
|
|
#define CCM_REG_QOS_PHYS_QNUM1_1 0xd0120
|
|
|
|
|
#define CCM_REG_QOS_PHYS_QNUM2_0 0xd0124
|
2008-06-24 11:27:52 +08:00
|
|
|
#define CCM_REG_QOS_PHYS_QNUM2_1 0xd0128
|
|
|
|
|
#define CCM_REG_QOS_PHYS_QNUM3_0 0xd012c
|
|
|
|
|
#define CCM_REG_QOS_PHYS_QNUM3_1 0xd0130
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define CCM_REG_STORM_CCM_IFEN 0xd0010
|
|
|
|
|
/* [RC 1] Set when the message length mismatch (relative to last indication)
|
|
|
|
|
at the STORM interface is detected. */
|
|
|
|
|
#define CCM_REG_STORM_LENGTH_MIS 0xd016c
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the STORM input in the WRR (Weighted Round robin)
|
|
|
|
|
mechanism. 0 stands for weight 8 (the most prioritised); 1 stands for
|
|
|
|
|
weight 1(least prioritised); 2 stands for weight 2 (more prioritised);
|
|
|
|
|
tc. */
|
|
|
|
|
#define CCM_REG_STORM_WEIGHT 0xd009c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Input tsem Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define CCM_REG_TSEM_IFEN 0xd001c
|
|
|
|
|
/* [RC 1] Set when the message length mismatch (relative to last indication)
|
|
|
|
|
at the tsem interface is detected. */
|
|
|
|
|
#define CCM_REG_TSEM_LENGTH_MIS 0xd0174
|
|
|
|
|
/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define CCM_REG_TSEM_WEIGHT 0xd00a0
|
|
|
|
|
/* [RW 1] Input usem Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define CCM_REG_USEM_IFEN 0xd0024
|
|
|
|
|
/* [RC 1] Set when message length mismatch (relative to last indication) at
|
|
|
|
|
the usem interface is detected. */
|
|
|
|
|
#define CCM_REG_USEM_LENGTH_MIS 0xd017c
|
|
|
|
|
/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define CCM_REG_USEM_WEIGHT 0xd00a8
|
|
|
|
|
/* [RW 1] Input xsem Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define CCM_REG_XSEM_IFEN 0xd0020
|
|
|
|
|
/* [RC 1] Set when the message length mismatch (relative to last indication)
|
|
|
|
|
at the xsem interface is detected. */
|
|
|
|
|
#define CCM_REG_XSEM_LENGTH_MIS 0xd0178
|
|
|
|
|
/* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define CCM_REG_XSEM_WEIGHT 0xd00a4
|
|
|
|
|
/* [RW 19] Indirect access to the descriptor table of the XX protection
|
|
|
|
|
mechanism. The fields are: [5:0] - message length; [12:6] - message
|
|
|
|
|
pointer; 18:13] - next pointer. */
|
|
|
|
|
#define CCM_REG_XX_DESCR_TABLE 0xd0300
|
2008-06-24 11:27:52 +08:00
|
|
|
#define CCM_REG_XX_DESCR_TABLE_SIZE 36
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 7] Used to read the value of XX protection Free counter. */
|
|
|
|
|
#define CCM_REG_XX_FREE 0xd0184
|
|
|
|
|
/* [RW 6] Initial value for the credit counter; responsible for fulfilling
|
|
|
|
|
of the Input Stage XX protection buffer by the XX protection pending
|
|
|
|
|
messages. Max credit available - 127. Write writes the initial credit
|
|
|
|
|
value; read returns the current value of the credit counter. Must be
|
|
|
|
|
initialized to maximum XX protected message size - 2 at start-up. */
|
|
|
|
|
#define CCM_REG_XX_INIT_CRD 0xd0220
|
|
|
|
|
/* [RW 7] The maximum number of pending messages; which may be stored in XX
|
|
|
|
|
protection. At read the ~ccm_registers_xx_free.xx_free counter is read.
|
|
|
|
|
At write comprises the start value of the ~ccm_registers_xx_free.xx_free
|
|
|
|
|
counter. */
|
|
|
|
|
#define CCM_REG_XX_MSG_NUM 0xd0224
|
|
|
|
|
/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
|
|
|
|
|
#define CCM_REG_XX_OVFL_EVNT_ID 0xd0044
|
|
|
|
|
/* [RW 18] Indirect access to the XX table of the XX protection mechanism.
|
|
|
|
|
The fields are: [5:0] - tail pointer; 11:6] - Link List size; 17:12] -
|
|
|
|
|
header pointer. */
|
|
|
|
|
#define CCM_REG_XX_TABLE 0xd0280
|
|
|
|
|
#define CDU_REG_CDU_CHK_MASK0 0x101000
|
|
|
|
|
#define CDU_REG_CDU_CHK_MASK1 0x101004
|
|
|
|
|
#define CDU_REG_CDU_CONTROL0 0x101008
|
|
|
|
|
#define CDU_REG_CDU_DEBUG 0x101010
|
|
|
|
|
#define CDU_REG_CDU_GLOBAL_PARAMS 0x101020
|
|
|
|
|
/* [RW 7] Interrupt mask register #0 read/write */
|
|
|
|
|
#define CDU_REG_CDU_INT_MASK 0x10103c
|
|
|
|
|
/* [R 7] Interrupt register #0 read */
|
|
|
|
|
#define CDU_REG_CDU_INT_STS 0x101030
|
|
|
|
|
/* [RW 5] Parity mask register #0 read/write */
|
|
|
|
|
#define CDU_REG_CDU_PRTY_MASK 0x10104c
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 5] Parity register #0 read */
|
|
|
|
|
#define CDU_REG_CDU_PRTY_STS 0x101040
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RC 32] logging of error data in case of a CDU load error:
|
|
|
|
|
{expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
|
|
|
|
|
ype_error; ctual_active; ctual_compressed_context}; */
|
|
|
|
|
#define CDU_REG_ERROR_DATA 0x101014
|
|
|
|
|
/* [WB 216] L1TT ram access. each entry has the following format :
|
|
|
|
|
{mrege_regions[7:0]; ffset12[5:0]...offset0[5:0];
|
|
|
|
|
ength12[5:0]...length0[5:0]; d12[3:0]...id0[3:0]} */
|
|
|
|
|
#define CDU_REG_L1TT 0x101800
|
|
|
|
|
/* [WB 24] MATT ram access. each entry has the following
|
|
|
|
|
format:{RegionLength[11:0]; egionOffset[11:0]} */
|
|
|
|
|
#define CDU_REG_MATT 0x101100
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 1] when this bit is set the CDU operates in e1hmf mode */
|
|
|
|
|
#define CDU_REG_MF_MODE 0x101050
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 1] indication the initializing the activity counter by the hardware
|
|
|
|
|
was done. */
|
|
|
|
|
#define CFC_REG_AC_INIT_DONE 0x104078
|
|
|
|
|
/* [RW 13] activity counter ram access */
|
|
|
|
|
#define CFC_REG_ACTIVITY_COUNTER 0x104400
|
|
|
|
|
#define CFC_REG_ACTIVITY_COUNTER_SIZE 256
|
|
|
|
|
/* [R 1] indication the initializing the cams by the hardware was done. */
|
|
|
|
|
#define CFC_REG_CAM_INIT_DONE 0x10407c
|
|
|
|
|
/* [RW 2] Interrupt mask register #0 read/write */
|
|
|
|
|
#define CFC_REG_CFC_INT_MASK 0x104108
|
|
|
|
|
/* [R 2] Interrupt register #0 read */
|
|
|
|
|
#define CFC_REG_CFC_INT_STS 0x1040fc
|
|
|
|
|
/* [RC 2] Interrupt register #0 read clear */
|
|
|
|
|
#define CFC_REG_CFC_INT_STS_CLR 0x104100
|
|
|
|
|
/* [RW 4] Parity mask register #0 read/write */
|
|
|
|
|
#define CFC_REG_CFC_PRTY_MASK 0x104118
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 4] Parity register #0 read */
|
|
|
|
|
#define CFC_REG_CFC_PRTY_STS 0x10410c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 21] CID cam access (21:1 - Data; alid - 0) */
|
|
|
|
|
#define CFC_REG_CID_CAM 0x104800
|
|
|
|
|
#define CFC_REG_CONTROL0 0x104028
|
|
|
|
|
#define CFC_REG_DEBUG0 0x104050
|
|
|
|
|
/* [RW 14] indicates per error (in #cfc_registers_cfc_error_vector.cfc_error
|
|
|
|
|
vector) whether the cfc should be disabled upon it */
|
|
|
|
|
#define CFC_REG_DISABLE_ON_ERROR 0x104044
|
|
|
|
|
/* [RC 14] CFC error vector. when the CFC detects an internal error it will
|
|
|
|
|
set one of these bits. the bit description can be found in CFC
|
|
|
|
|
specifications */
|
|
|
|
|
#define CFC_REG_ERROR_VECTOR 0x10403c
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [WB 93] LCID info ram access */
|
|
|
|
|
#define CFC_REG_INFO_RAM 0x105000
|
|
|
|
|
#define CFC_REG_INFO_RAM_SIZE 1024
|
2007-11-16 02:09:02 +08:00
|
|
|
#define CFC_REG_INIT_REG 0x10404c
|
2009-02-16 15:24:08 +08:00
|
|
|
#define CFC_REG_INTERFACES 0x104058
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 24] {weight_load_client7[2:0] to weight_load_client0[2:0]}. this
|
|
|
|
|
field allows changing the priorities of the weighted-round-robin arbiter
|
|
|
|
|
which selects which CFC load client should be served next */
|
|
|
|
|
#define CFC_REG_LCREQ_WEIGHTS 0x104084
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 16] Link List ram access; data = {prev_lcid; ext_lcid} */
|
|
|
|
|
#define CFC_REG_LINK_LIST 0x104c00
|
|
|
|
|
#define CFC_REG_LINK_LIST_SIZE 256
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 1] indication the initializing the link list by the hardware was done. */
|
|
|
|
|
#define CFC_REG_LL_INIT_DONE 0x104074
|
|
|
|
|
/* [R 9] Number of allocated LCIDs which are at empty state */
|
|
|
|
|
#define CFC_REG_NUM_LCIDS_ALLOC 0x104020
|
|
|
|
|
/* [R 9] Number of Arriving LCIDs in Link List Block */
|
|
|
|
|
#define CFC_REG_NUM_LCIDS_ARRIVING 0x104004
|
|
|
|
|
/* [R 9] Number of Leaving LCIDs in Link List Block */
|
|
|
|
|
#define CFC_REG_NUM_LCIDS_LEAVING 0x104018
|
2010-10-06 11:28:26 +08:00
|
|
|
#define CFC_REG_WEAK_ENABLE_PF 0x104124
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 8] The event id for aggregated interrupt 0 */
|
|
|
|
|
#define CSDM_REG_AGG_INT_EVENT_0 0xc2038
|
2008-06-24 11:27:52 +08:00
|
|
|
#define CSDM_REG_AGG_INT_EVENT_10 0xc2060
|
|
|
|
|
#define CSDM_REG_AGG_INT_EVENT_11 0xc2064
|
|
|
|
|
#define CSDM_REG_AGG_INT_EVENT_12 0xc2068
|
|
|
|
|
#define CSDM_REG_AGG_INT_EVENT_13 0xc206c
|
|
|
|
|
#define CSDM_REG_AGG_INT_EVENT_14 0xc2070
|
|
|
|
|
#define CSDM_REG_AGG_INT_EVENT_15 0xc2074
|
|
|
|
|
#define CSDM_REG_AGG_INT_EVENT_16 0xc2078
|
|
|
|
|
#define CSDM_REG_AGG_INT_EVENT_2 0xc2040
|
|
|
|
|
#define CSDM_REG_AGG_INT_EVENT_3 0xc2044
|
|
|
|
|
#define CSDM_REG_AGG_INT_EVENT_4 0xc2048
|
2009-08-13 13:53:28 +08:00
|
|
|
#define CSDM_REG_AGG_INT_EVENT_5 0xc204c
|
|
|
|
|
#define CSDM_REG_AGG_INT_EVENT_6 0xc2050
|
|
|
|
|
#define CSDM_REG_AGG_INT_EVENT_7 0xc2054
|
|
|
|
|
#define CSDM_REG_AGG_INT_EVENT_8 0xc2058
|
|
|
|
|
#define CSDM_REG_AGG_INT_EVENT_9 0xc205c
|
|
|
|
|
/* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
|
|
|
|
|
or auto-mask-mode (1) */
|
|
|
|
|
#define CSDM_REG_AGG_INT_MODE_10 0xc21e0
|
|
|
|
|
#define CSDM_REG_AGG_INT_MODE_11 0xc21e4
|
|
|
|
|
#define CSDM_REG_AGG_INT_MODE_12 0xc21e8
|
|
|
|
|
#define CSDM_REG_AGG_INT_MODE_13 0xc21ec
|
|
|
|
|
#define CSDM_REG_AGG_INT_MODE_14 0xc21f0
|
|
|
|
|
#define CSDM_REG_AGG_INT_MODE_15 0xc21f4
|
|
|
|
|
#define CSDM_REG_AGG_INT_MODE_16 0xc21f8
|
|
|
|
|
#define CSDM_REG_AGG_INT_MODE_6 0xc21d0
|
|
|
|
|
#define CSDM_REG_AGG_INT_MODE_7 0xc21d4
|
|
|
|
|
#define CSDM_REG_AGG_INT_MODE_8 0xc21d8
|
|
|
|
|
#define CSDM_REG_AGG_INT_MODE_9 0xc21dc
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
|
|
|
|
|
#define CSDM_REG_CFC_RSP_START_ADDR 0xc2008
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #0 */
|
|
|
|
|
#define CSDM_REG_CMP_COUNTER_MAX0 0xc201c
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #1 */
|
|
|
|
|
#define CSDM_REG_CMP_COUNTER_MAX1 0xc2020
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #2 */
|
|
|
|
|
#define CSDM_REG_CMP_COUNTER_MAX2 0xc2024
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #3 */
|
|
|
|
|
#define CSDM_REG_CMP_COUNTER_MAX3 0xc2028
|
|
|
|
|
/* [RW 13] The start address in the internal RAM for the completion
|
|
|
|
|
counters. */
|
|
|
|
|
#define CSDM_REG_CMP_COUNTER_START_ADDR 0xc200c
|
|
|
|
|
/* [RW 32] Interrupt mask register #0 read/write */
|
|
|
|
|
#define CSDM_REG_CSDM_INT_MASK_0 0xc229c
|
|
|
|
|
#define CSDM_REG_CSDM_INT_MASK_1 0xc22ac
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 32] Interrupt register #0 read */
|
|
|
|
|
#define CSDM_REG_CSDM_INT_STS_0 0xc2290
|
|
|
|
|
#define CSDM_REG_CSDM_INT_STS_1 0xc22a0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 11] Parity mask register #0 read/write */
|
|
|
|
|
#define CSDM_REG_CSDM_PRTY_MASK 0xc22bc
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 11] Parity register #0 read */
|
|
|
|
|
#define CSDM_REG_CSDM_PRTY_STS 0xc22b0
|
2007-11-16 02:09:02 +08:00
|
|
|
#define CSDM_REG_ENABLE_IN1 0xc2238
|
|
|
|
|
#define CSDM_REG_ENABLE_IN2 0xc223c
|
|
|
|
|
#define CSDM_REG_ENABLE_OUT1 0xc2240
|
|
|
|
|
#define CSDM_REG_ENABLE_OUT2 0xc2244
|
|
|
|
|
/* [RW 4] The initial number of messages that can be sent to the pxp control
|
|
|
|
|
interface without receiving any ACK. */
|
|
|
|
|
#define CSDM_REG_INIT_CREDIT_PXP_CTRL 0xc24bc
|
|
|
|
|
/* [ST 32] The number of ACK after placement messages received */
|
|
|
|
|
#define CSDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc227c
|
|
|
|
|
/* [ST 32] The number of packet end messages received from the parser */
|
|
|
|
|
#define CSDM_REG_NUM_OF_PKT_END_MSG 0xc2274
|
|
|
|
|
/* [ST 32] The number of requests received from the pxp async if */
|
|
|
|
|
#define CSDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc2278
|
|
|
|
|
/* [ST 32] The number of commands received in queue 0 */
|
|
|
|
|
#define CSDM_REG_NUM_OF_Q0_CMD 0xc2248
|
|
|
|
|
/* [ST 32] The number of commands received in queue 10 */
|
|
|
|
|
#define CSDM_REG_NUM_OF_Q10_CMD 0xc226c
|
|
|
|
|
/* [ST 32] The number of commands received in queue 11 */
|
|
|
|
|
#define CSDM_REG_NUM_OF_Q11_CMD 0xc2270
|
|
|
|
|
/* [ST 32] The number of commands received in queue 1 */
|
|
|
|
|
#define CSDM_REG_NUM_OF_Q1_CMD 0xc224c
|
|
|
|
|
/* [ST 32] The number of commands received in queue 3 */
|
|
|
|
|
#define CSDM_REG_NUM_OF_Q3_CMD 0xc2250
|
|
|
|
|
/* [ST 32] The number of commands received in queue 4 */
|
|
|
|
|
#define CSDM_REG_NUM_OF_Q4_CMD 0xc2254
|
|
|
|
|
/* [ST 32] The number of commands received in queue 5 */
|
|
|
|
|
#define CSDM_REG_NUM_OF_Q5_CMD 0xc2258
|
|
|
|
|
/* [ST 32] The number of commands received in queue 6 */
|
|
|
|
|
#define CSDM_REG_NUM_OF_Q6_CMD 0xc225c
|
|
|
|
|
/* [ST 32] The number of commands received in queue 7 */
|
|
|
|
|
#define CSDM_REG_NUM_OF_Q7_CMD 0xc2260
|
|
|
|
|
/* [ST 32] The number of commands received in queue 8 */
|
|
|
|
|
#define CSDM_REG_NUM_OF_Q8_CMD 0xc2264
|
|
|
|
|
/* [ST 32] The number of commands received in queue 9 */
|
|
|
|
|
#define CSDM_REG_NUM_OF_Q9_CMD 0xc2268
|
|
|
|
|
/* [RW 13] The start address in the internal RAM for queue counters */
|
|
|
|
|
#define CSDM_REG_Q_COUNTER_START_ADDR 0xc2010
|
|
|
|
|
/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
|
|
|
|
|
#define CSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc2548
|
|
|
|
|
/* [R 1] parser fifo empty in sdm_sync block */
|
|
|
|
|
#define CSDM_REG_SYNC_PARSER_EMPTY 0xc2550
|
|
|
|
|
/* [R 1] parser serial fifo empty in sdm_sync block */
|
|
|
|
|
#define CSDM_REG_SYNC_SYNC_EMPTY 0xc2558
|
|
|
|
|
/* [RW 32] Tick for timer counter. Applicable only when
|
|
|
|
|
~csdm_registers_timer_tick_enable.timer_tick_enable =1 */
|
|
|
|
|
#define CSDM_REG_TIMER_TICK 0xc2000
|
|
|
|
|
/* [RW 5] The number of time_slots in the arbitration cycle */
|
|
|
|
|
#define CSEM_REG_ARB_CYCLE_SIZE 0x200034
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 0. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2 */
|
|
|
|
|
#define CSEM_REG_ARB_ELEMENT0 0x200020
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 1. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.
|
|
|
|
|
Could not be equal to register ~csem_registers_arb_element0.arb_element0 */
|
|
|
|
|
#define CSEM_REG_ARB_ELEMENT1 0x200024
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 2. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.
|
|
|
|
|
Could not be equal to register ~csem_registers_arb_element0.arb_element0
|
|
|
|
|
and ~csem_registers_arb_element1.arb_element1 */
|
|
|
|
|
#define CSEM_REG_ARB_ELEMENT2 0x200028
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 3. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
|
|
|
|
|
not be equal to register ~csem_registers_arb_element0.arb_element0 and
|
|
|
|
|
~csem_registers_arb_element1.arb_element1 and
|
|
|
|
|
~csem_registers_arb_element2.arb_element2 */
|
|
|
|
|
#define CSEM_REG_ARB_ELEMENT3 0x20002c
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 4. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.
|
|
|
|
|
Could not be equal to register ~csem_registers_arb_element0.arb_element0
|
|
|
|
|
and ~csem_registers_arb_element1.arb_element1 and
|
|
|
|
|
~csem_registers_arb_element2.arb_element2 and
|
|
|
|
|
~csem_registers_arb_element3.arb_element3 */
|
|
|
|
|
#define CSEM_REG_ARB_ELEMENT4 0x200030
|
|
|
|
|
/* [RW 32] Interrupt mask register #0 read/write */
|
|
|
|
|
#define CSEM_REG_CSEM_INT_MASK_0 0x200110
|
|
|
|
|
#define CSEM_REG_CSEM_INT_MASK_1 0x200120
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 32] Interrupt register #0 read */
|
|
|
|
|
#define CSEM_REG_CSEM_INT_STS_0 0x200104
|
|
|
|
|
#define CSEM_REG_CSEM_INT_STS_1 0x200114
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] Parity mask register #0 read/write */
|
|
|
|
|
#define CSEM_REG_CSEM_PRTY_MASK_0 0x200130
|
|
|
|
|
#define CSEM_REG_CSEM_PRTY_MASK_1 0x200140
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 32] Parity register #0 read */
|
|
|
|
|
#define CSEM_REG_CSEM_PRTY_STS_0 0x200124
|
|
|
|
|
#define CSEM_REG_CSEM_PRTY_STS_1 0x200134
|
2007-11-16 02:09:02 +08:00
|
|
|
#define CSEM_REG_ENABLE_IN 0x2000a4
|
|
|
|
|
#define CSEM_REG_ENABLE_OUT 0x2000a8
|
|
|
|
|
/* [RW 32] This address space contains all registers and memories that are
|
|
|
|
|
placed in SEM_FAST block. The SEM_FAST registers are described in
|
2008-06-24 11:27:52 +08:00
|
|
|
appendix B. In order to access the sem_fast registers the base address
|
|
|
|
|
~fast_memory.fast_memory should be added to eachsem_fast register offset. */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define CSEM_REG_FAST_MEMORY 0x220000
|
|
|
|
|
/* [RW 1] Disables input messages from FIC0 May be updated during run_time
|
|
|
|
|
by the microcode */
|
|
|
|
|
#define CSEM_REG_FIC0_DISABLE 0x200224
|
|
|
|
|
/* [RW 1] Disables input messages from FIC1 May be updated during run_time
|
|
|
|
|
by the microcode */
|
|
|
|
|
#define CSEM_REG_FIC1_DISABLE 0x200234
|
|
|
|
|
/* [RW 15] Interrupt table Read and write access to it is not possible in
|
|
|
|
|
the middle of the work */
|
|
|
|
|
#define CSEM_REG_INT_TABLE 0x200400
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that entered through
|
|
|
|
|
FIC0 */
|
|
|
|
|
#define CSEM_REG_MSG_NUM_FIC0 0x200000
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that entered through
|
|
|
|
|
FIC1 */
|
|
|
|
|
#define CSEM_REG_MSG_NUM_FIC1 0x200004
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC0 */
|
|
|
|
|
#define CSEM_REG_MSG_NUM_FOC0 0x200008
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC1 */
|
|
|
|
|
#define CSEM_REG_MSG_NUM_FOC1 0x20000c
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC2 */
|
|
|
|
|
#define CSEM_REG_MSG_NUM_FOC2 0x200010
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC3 */
|
|
|
|
|
#define CSEM_REG_MSG_NUM_FOC3 0x200014
|
|
|
|
|
/* [RW 1] Disables input messages from the passive buffer May be updated
|
|
|
|
|
during run_time by the microcode */
|
|
|
|
|
#define CSEM_REG_PAS_DISABLE 0x20024c
|
|
|
|
|
/* [WB 128] Debug only. Passive buffer memory */
|
|
|
|
|
#define CSEM_REG_PASSIVE_BUFFER 0x202000
|
|
|
|
|
/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
|
|
|
|
|
#define CSEM_REG_PRAM 0x240000
|
|
|
|
|
/* [R 16] Valid sleeping threads indication have bit per thread */
|
|
|
|
|
#define CSEM_REG_SLEEP_THREADS_VALID 0x20026c
|
|
|
|
|
/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
|
|
|
|
|
#define CSEM_REG_SLOW_EXT_STORE_EMPTY 0x2002a0
|
|
|
|
|
/* [RW 16] List of free threads . There is a bit per thread. */
|
|
|
|
|
#define CSEM_REG_THREADS_LIST 0x2002e4
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 0 */
|
|
|
|
|
#define CSEM_REG_TS_0_AS 0x200038
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 10 */
|
|
|
|
|
#define CSEM_REG_TS_10_AS 0x200060
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 11 */
|
|
|
|
|
#define CSEM_REG_TS_11_AS 0x200064
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 12 */
|
|
|
|
|
#define CSEM_REG_TS_12_AS 0x200068
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 13 */
|
|
|
|
|
#define CSEM_REG_TS_13_AS 0x20006c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 14 */
|
|
|
|
|
#define CSEM_REG_TS_14_AS 0x200070
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 15 */
|
|
|
|
|
#define CSEM_REG_TS_15_AS 0x200074
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 16 */
|
|
|
|
|
#define CSEM_REG_TS_16_AS 0x200078
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 17 */
|
|
|
|
|
#define CSEM_REG_TS_17_AS 0x20007c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 18 */
|
|
|
|
|
#define CSEM_REG_TS_18_AS 0x200080
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 1 */
|
|
|
|
|
#define CSEM_REG_TS_1_AS 0x20003c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 2 */
|
|
|
|
|
#define CSEM_REG_TS_2_AS 0x200040
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 3 */
|
|
|
|
|
#define CSEM_REG_TS_3_AS 0x200044
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 4 */
|
|
|
|
|
#define CSEM_REG_TS_4_AS 0x200048
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 5 */
|
|
|
|
|
#define CSEM_REG_TS_5_AS 0x20004c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 6 */
|
|
|
|
|
#define CSEM_REG_TS_6_AS 0x200050
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 7 */
|
|
|
|
|
#define CSEM_REG_TS_7_AS 0x200054
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 8 */
|
|
|
|
|
#define CSEM_REG_TS_8_AS 0x200058
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 9 */
|
|
|
|
|
#define CSEM_REG_TS_9_AS 0x20005c
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
|
|
|
|
|
* VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
|
|
|
|
|
#define CSEM_REG_VFPF_ERR_NUM 0x200380
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Parity mask register #0 read/write */
|
|
|
|
|
#define DBG_REG_DBG_PRTY_MASK 0xc0a8
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 1] Parity register #0 read */
|
|
|
|
|
#define DBG_REG_DBG_PRTY_STS 0xc09c
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [RW 1] When set the DMAE will process the commands as in E1.5. 1.The
|
|
|
|
|
* function that is used is always SRC-PCI; 2.VF_Valid = 0; 3.VFID=0;
|
|
|
|
|
* 4.Completion function=0; 5.Error handling=0 */
|
|
|
|
|
#define DMAE_REG_BACKWARD_COMP_EN 0x10207c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] Commands memory. The address to command X; row Y is to calculated
|
|
|
|
|
as 14*X+Y. */
|
|
|
|
|
#define DMAE_REG_CMD_MEM 0x102400
|
2008-06-24 11:33:01 +08:00
|
|
|
#define DMAE_REG_CMD_MEM_SIZE 224
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] If 0 - the CRC-16c initial value is all zeroes; if 1 - the CRC-16c
|
|
|
|
|
initial value is all ones. */
|
|
|
|
|
#define DMAE_REG_CRC16C_INIT 0x10201c
|
|
|
|
|
/* [RW 1] If 0 - the CRC-16 T10 initial value is all zeroes; if 1 - the
|
|
|
|
|
CRC-16 T10 initial value is all ones. */
|
|
|
|
|
#define DMAE_REG_CRC16T10_INIT 0x102020
|
|
|
|
|
/* [RW 2] Interrupt mask register #0 read/write */
|
|
|
|
|
#define DMAE_REG_DMAE_INT_MASK 0x102054
|
|
|
|
|
/* [RW 4] Parity mask register #0 read/write */
|
|
|
|
|
#define DMAE_REG_DMAE_PRTY_MASK 0x102064
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 4] Parity register #0 read */
|
|
|
|
|
#define DMAE_REG_DMAE_PRTY_STS 0x102058
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Command 0 go. */
|
|
|
|
|
#define DMAE_REG_GO_C0 0x102080
|
|
|
|
|
/* [RW 1] Command 1 go. */
|
|
|
|
|
#define DMAE_REG_GO_C1 0x102084
|
|
|
|
|
/* [RW 1] Command 10 go. */
|
|
|
|
|
#define DMAE_REG_GO_C10 0x102088
|
|
|
|
|
/* [RW 1] Command 11 go. */
|
|
|
|
|
#define DMAE_REG_GO_C11 0x10208c
|
|
|
|
|
/* [RW 1] Command 12 go. */
|
|
|
|
|
#define DMAE_REG_GO_C12 0x102090
|
|
|
|
|
/* [RW 1] Command 13 go. */
|
|
|
|
|
#define DMAE_REG_GO_C13 0x102094
|
|
|
|
|
/* [RW 1] Command 14 go. */
|
|
|
|
|
#define DMAE_REG_GO_C14 0x102098
|
|
|
|
|
/* [RW 1] Command 15 go. */
|
|
|
|
|
#define DMAE_REG_GO_C15 0x10209c
|
|
|
|
|
/* [RW 1] Command 2 go. */
|
|
|
|
|
#define DMAE_REG_GO_C2 0x1020a0
|
|
|
|
|
/* [RW 1] Command 3 go. */
|
|
|
|
|
#define DMAE_REG_GO_C3 0x1020a4
|
|
|
|
|
/* [RW 1] Command 4 go. */
|
|
|
|
|
#define DMAE_REG_GO_C4 0x1020a8
|
|
|
|
|
/* [RW 1] Command 5 go. */
|
|
|
|
|
#define DMAE_REG_GO_C5 0x1020ac
|
|
|
|
|
/* [RW 1] Command 6 go. */
|
|
|
|
|
#define DMAE_REG_GO_C6 0x1020b0
|
|
|
|
|
/* [RW 1] Command 7 go. */
|
|
|
|
|
#define DMAE_REG_GO_C7 0x1020b4
|
|
|
|
|
/* [RW 1] Command 8 go. */
|
|
|
|
|
#define DMAE_REG_GO_C8 0x1020b8
|
|
|
|
|
/* [RW 1] Command 9 go. */
|
|
|
|
|
#define DMAE_REG_GO_C9 0x1020bc
|
|
|
|
|
/* [RW 1] DMAE GRC Interface (Target; aster) enable. If 0 - the acknowledge
|
|
|
|
|
input is disregarded; valid is deasserted; all other signals are treated
|
|
|
|
|
as usual; if 1 - normal activity. */
|
|
|
|
|
#define DMAE_REG_GRC_IFEN 0x102008
|
|
|
|
|
/* [RW 1] DMAE PCI Interface (Request; ead; rite) enable. If 0 - the
|
|
|
|
|
acknowledge input is disregarded; valid is deasserted; full is asserted;
|
|
|
|
|
all other signals are treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define DMAE_REG_PCI_IFEN 0x102004
|
|
|
|
|
/* [RW 4] DMAE- PCI Request Interface initial credit. Write writes the
|
|
|
|
|
initial value to the credit counter; related to the address. Read returns
|
|
|
|
|
the current value of the counter. */
|
|
|
|
|
#define DMAE_REG_PXP_REQ_INIT_CRD 0x1020c0
|
|
|
|
|
/* [RW 8] Aggregation command. */
|
|
|
|
|
#define DORQ_REG_AGG_CMD0 0x170060
|
|
|
|
|
/* [RW 8] Aggregation command. */
|
|
|
|
|
#define DORQ_REG_AGG_CMD1 0x170064
|
|
|
|
|
/* [RW 8] Aggregation command. */
|
|
|
|
|
#define DORQ_REG_AGG_CMD2 0x170068
|
|
|
|
|
/* [RW 8] Aggregation command. */
|
|
|
|
|
#define DORQ_REG_AGG_CMD3 0x17006c
|
|
|
|
|
/* [RW 28] UCM Header. */
|
|
|
|
|
#define DORQ_REG_CMHEAD_RX 0x170050
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] Doorbell address for RBC doorbells (function 0). */
|
|
|
|
|
#define DORQ_REG_DB_ADDR0 0x17008c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 5] Interrupt mask register #0 read/write */
|
|
|
|
|
#define DORQ_REG_DORQ_INT_MASK 0x170180
|
|
|
|
|
/* [R 5] Interrupt register #0 read */
|
|
|
|
|
#define DORQ_REG_DORQ_INT_STS 0x170174
|
|
|
|
|
/* [RC 5] Interrupt register #0 read clear */
|
|
|
|
|
#define DORQ_REG_DORQ_INT_STS_CLR 0x170178
|
|
|
|
|
/* [RW 2] Parity mask register #0 read/write */
|
|
|
|
|
#define DORQ_REG_DORQ_PRTY_MASK 0x170190
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 2] Parity register #0 read */
|
|
|
|
|
#define DORQ_REG_DORQ_PRTY_STS 0x170184
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 8] The address to write the DPM CID to STORM. */
|
|
|
|
|
#define DORQ_REG_DPM_CID_ADDR 0x170044
|
|
|
|
|
/* [RW 5] The DPM mode CID extraction offset. */
|
|
|
|
|
#define DORQ_REG_DPM_CID_OFST 0x170030
|
|
|
|
|
/* [RW 12] The threshold of the DQ FIFO to send the almost full interrupt. */
|
|
|
|
|
#define DORQ_REG_DQ_FIFO_AFULL_TH 0x17007c
|
|
|
|
|
/* [RW 12] The threshold of the DQ FIFO to send the full interrupt. */
|
|
|
|
|
#define DORQ_REG_DQ_FIFO_FULL_TH 0x170078
|
|
|
|
|
/* [R 13] Current value of the DQ FIFO fill level according to following
|
|
|
|
|
pointer. The range is 0 - 256 FIFO rows; where each row stands for the
|
|
|
|
|
doorbell. */
|
|
|
|
|
#define DORQ_REG_DQ_FILL_LVLF 0x1700a4
|
|
|
|
|
/* [R 1] DQ FIFO full status. Is set; when FIFO filling level is more or
|
|
|
|
|
equal to full threshold; reset on full clear. */
|
|
|
|
|
#define DORQ_REG_DQ_FULL_ST 0x1700c0
|
|
|
|
|
/* [RW 28] The value sent to CM header in the case of CFC load error. */
|
|
|
|
|
#define DORQ_REG_ERR_CMHEAD 0x170058
|
|
|
|
|
#define DORQ_REG_IF_EN 0x170004
|
|
|
|
|
#define DORQ_REG_MODE_ACT 0x170008
|
|
|
|
|
/* [RW 5] The normal mode CID extraction offset. */
|
|
|
|
|
#define DORQ_REG_NORM_CID_OFST 0x17002c
|
|
|
|
|
/* [RW 28] TCM Header when only TCP context is loaded. */
|
|
|
|
|
#define DORQ_REG_NORM_CMHEAD_TX 0x17004c
|
|
|
|
|
/* [RW 3] The number of simultaneous outstanding requests to Context Fetch
|
|
|
|
|
Interface. */
|
|
|
|
|
#define DORQ_REG_OUTST_REQ 0x17003c
|
|
|
|
|
#define DORQ_REG_REGN 0x170038
|
|
|
|
|
/* [R 4] Current value of response A counter credit. Initial credit is
|
|
|
|
|
configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
|
|
|
|
|
register. */
|
|
|
|
|
#define DORQ_REG_RSPA_CRD_CNT 0x1700ac
|
|
|
|
|
/* [R 4] Current value of response B counter credit. Initial credit is
|
|
|
|
|
configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
|
|
|
|
|
register. */
|
|
|
|
|
#define DORQ_REG_RSPB_CRD_CNT 0x1700b0
|
|
|
|
|
/* [RW 4] The initial credit at the Doorbell Response Interface. The write
|
|
|
|
|
writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The
|
|
|
|
|
read reads this written value. */
|
|
|
|
|
#define DORQ_REG_RSP_INIT_CRD 0x170048
|
|
|
|
|
/* [RW 4] Initial activity counter value on the load request; when the
|
|
|
|
|
shortcut is done. */
|
|
|
|
|
#define DORQ_REG_SHRT_ACT_CNT 0x170070
|
|
|
|
|
/* [RW 28] TCM Header when both ULP and TCP context is loaded. */
|
|
|
|
|
#define DORQ_REG_SHRT_CMHEAD 0x170054
|
|
|
|
|
#define HC_CONFIG_0_REG_ATTN_BIT_EN_0 (0x1<<4)
|
|
|
|
|
#define HC_CONFIG_0_REG_INT_LINE_EN_0 (0x1<<3)
|
2009-02-12 16:36:15 +08:00
|
|
|
#define HC_CONFIG_0_REG_MSI_ATTN_EN_0 (0x1<<7)
|
2007-11-16 02:09:02 +08:00
|
|
|
#define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1<<2)
|
|
|
|
|
#define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1)
|
|
|
|
|
#define HC_REG_AGG_INT_0 0x108050
|
|
|
|
|
#define HC_REG_AGG_INT_1 0x108054
|
|
|
|
|
#define HC_REG_ATTN_BIT 0x108120
|
|
|
|
|
#define HC_REG_ATTN_IDX 0x108100
|
|
|
|
|
#define HC_REG_ATTN_MSG0_ADDR_L 0x108018
|
|
|
|
|
#define HC_REG_ATTN_MSG1_ADDR_L 0x108020
|
|
|
|
|
#define HC_REG_ATTN_NUM_P0 0x108038
|
|
|
|
|
#define HC_REG_ATTN_NUM_P1 0x10803c
|
2008-08-14 06:51:48 +08:00
|
|
|
#define HC_REG_COMMAND_REG 0x108180
|
2007-11-16 02:09:02 +08:00
|
|
|
#define HC_REG_CONFIG_0 0x108000
|
|
|
|
|
#define HC_REG_CONFIG_1 0x108004
|
2008-06-24 11:27:52 +08:00
|
|
|
#define HC_REG_FUNC_NUM_P0 0x1080ac
|
|
|
|
|
#define HC_REG_FUNC_NUM_P1 0x1080b0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 3] Parity mask register #0 read/write */
|
|
|
|
|
#define HC_REG_HC_PRTY_MASK 0x1080a0
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 3] Parity register #0 read */
|
|
|
|
|
#define HC_REG_HC_PRTY_STS 0x108094
|
2010-10-19 13:13:09 +08:00
|
|
|
/* [RC 3] Parity register #0 read clear */
|
|
|
|
|
#define HC_REG_HC_PRTY_STS_CLR 0x108098
|
|
|
|
|
#define HC_REG_INT_MASK 0x108108
|
2007-11-16 02:09:02 +08:00
|
|
|
#define HC_REG_LEADING_EDGE_0 0x108040
|
|
|
|
|
#define HC_REG_LEADING_EDGE_1 0x108048
|
2010-10-19 13:13:09 +08:00
|
|
|
#define HC_REG_MAIN_MEMORY 0x108800
|
|
|
|
|
#define HC_REG_MAIN_MEMORY_SIZE 152
|
2007-11-16 02:09:02 +08:00
|
|
|
#define HC_REG_P0_PROD_CONS 0x108200
|
|
|
|
|
#define HC_REG_P1_PROD_CONS 0x108400
|
|
|
|
|
#define HC_REG_PBA_COMMAND 0x108140
|
|
|
|
|
#define HC_REG_PCI_CONFIG_0 0x108010
|
|
|
|
|
#define HC_REG_PCI_CONFIG_1 0x108014
|
|
|
|
|
#define HC_REG_STATISTIC_COUNTERS 0x109000
|
|
|
|
|
#define HC_REG_TRAILING_EDGE_0 0x108044
|
|
|
|
|
#define HC_REG_TRAILING_EDGE_1 0x10804c
|
|
|
|
|
#define HC_REG_UC_RAM_ADDR_0 0x108028
|
|
|
|
|
#define HC_REG_UC_RAM_ADDR_1 0x108030
|
|
|
|
|
#define HC_REG_USTORM_ADDR_FOR_COALESCE 0x108068
|
|
|
|
|
#define HC_REG_VQID_0 0x108008
|
|
|
|
|
#define HC_REG_VQID_1 0x10800c
|
2010-10-06 11:28:26 +08:00
|
|
|
#define IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN (0x1<<1)
|
|
|
|
|
#define IGU_REG_ATTENTION_ACK_BITS 0x130108
|
|
|
|
|
/* [R 4] Debug: attn_fsm */
|
|
|
|
|
#define IGU_REG_ATTN_FSM 0x130054
|
|
|
|
|
#define IGU_REG_ATTN_MSG_ADDR_H 0x13011c
|
|
|
|
|
#define IGU_REG_ATTN_MSG_ADDR_L 0x130120
|
|
|
|
|
/* [R 4] Debug: [3] - attention write done message is pending (0-no pending;
|
|
|
|
|
* 1-pending). [2:0] = PFID. Pending means attention message was sent; but
|
|
|
|
|
* write done didnt receive. */
|
|
|
|
|
#define IGU_REG_ATTN_WRITE_DONE_PENDING 0x130030
|
|
|
|
|
#define IGU_REG_BLOCK_CONFIGURATION 0x130000
|
|
|
|
|
#define IGU_REG_COMMAND_REG_32LSB_DATA 0x130124
|
|
|
|
|
#define IGU_REG_COMMAND_REG_CTRL 0x13012c
|
|
|
|
|
/* [WB_R 32] Cleanup bit status per SB. 1 = cleanup is set. 0 = cleanup bit
|
|
|
|
|
* is clear. The bits in this registers are set and clear via the producer
|
|
|
|
|
* command. Data valid only in addresses 0-4. all the rest are zero. */
|
|
|
|
|
#define IGU_REG_CSTORM_TYPE_0_SB_CLEANUP 0x130200
|
|
|
|
|
/* [R 5] Debug: ctrl_fsm */
|
|
|
|
|
#define IGU_REG_CTRL_FSM 0x130064
|
|
|
|
|
/* [R 1] data availble for error memory. If this bit is clear do not red
|
|
|
|
|
* from error_handling_memory. */
|
|
|
|
|
#define IGU_REG_ERROR_HANDLING_DATA_VALID 0x130130
|
|
|
|
|
/* [R 11] Parity register #0 read */
|
|
|
|
|
#define IGU_REG_IGU_PRTY_STS 0x13009c
|
|
|
|
|
/* [R 4] Debug: int_handle_fsm */
|
|
|
|
|
#define IGU_REG_INT_HANDLE_FSM 0x130050
|
|
|
|
|
#define IGU_REG_LEADING_EDGE_LATCH 0x130134
|
|
|
|
|
/* [RW 14] mapping CAM; relevant for E2 operating mode only. [0] - valid.
|
|
|
|
|
* [6:1] - vector number; [13:7] - FID (if VF - [13] = 0; [12:7] = VF
|
|
|
|
|
* number; if PF - [13] = 1; [12:10] = 0; [9:7] = PF number); */
|
|
|
|
|
#define IGU_REG_MAPPING_MEMORY 0x131000
|
|
|
|
|
#define IGU_REG_MAPPING_MEMORY_SIZE 136
|
|
|
|
|
#define IGU_REG_PBA_STATUS_LSB 0x130138
|
|
|
|
|
#define IGU_REG_PBA_STATUS_MSB 0x13013c
|
|
|
|
|
#define IGU_REG_PCI_PF_MSI_EN 0x130140
|
|
|
|
|
#define IGU_REG_PCI_PF_MSIX_EN 0x130144
|
|
|
|
|
#define IGU_REG_PCI_PF_MSIX_FUNC_MASK 0x130148
|
|
|
|
|
/* [WB_R 32] Each bit represent the pending bits status for that SB. 0 = no
|
|
|
|
|
* pending; 1 = pending. Pendings means interrupt was asserted; and write
|
|
|
|
|
* done was not received. Data valid only in addresses 0-4. all the rest are
|
|
|
|
|
* zero. */
|
|
|
|
|
#define IGU_REG_PENDING_BITS_STATUS 0x130300
|
|
|
|
|
#define IGU_REG_PF_CONFIGURATION 0x130154
|
|
|
|
|
/* [RW 20] producers only. E2 mode: address 0-135 match to the mapping
|
|
|
|
|
* memory; 136 - PF0 default prod; 137 PF1 default prod; 138 - PF2 default
|
|
|
|
|
* prod; 139 PF3 default prod; 140 - PF0 - ATTN prod; 141 - PF1 - ATTN prod;
|
|
|
|
|
* 142 - PF2 - ATTN prod; 143 - PF3 - ATTN prod; 144-147 reserved. E1.5 mode
|
|
|
|
|
* - In backward compatible mode; for non default SB; each even line in the
|
|
|
|
|
* memory holds the U producer and each odd line hold the C producer. The
|
|
|
|
|
* first 128 producer are for NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The
|
|
|
|
|
* last 20 producers are for the DSB for each PF. each PF has five segments
|
|
|
|
|
* (the order inside each segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
|
|
|
|
|
* 132-135 C prods; 136-139 X prods; 140-143 T prods; 144-147 ATTN prods; */
|
|
|
|
|
#define IGU_REG_PROD_CONS_MEMORY 0x132000
|
|
|
|
|
/* [R 3] Debug: pxp_arb_fsm */
|
|
|
|
|
#define IGU_REG_PXP_ARB_FSM 0x130068
|
|
|
|
|
/* [RW 6] Write one for each bit will reset the appropriate memory. When the
|
|
|
|
|
* memory reset finished the appropriate bit will be clear. Bit 0 - mapping
|
|
|
|
|
* memory; Bit 1 - SB memory; Bit 2 - SB interrupt and mask register; Bit 3
|
|
|
|
|
* - MSIX memory; Bit 4 - PBA memory; Bit 5 - statistics; */
|
|
|
|
|
#define IGU_REG_RESET_MEMORIES 0x130158
|
|
|
|
|
/* [R 4] Debug: sb_ctrl_fsm */
|
|
|
|
|
#define IGU_REG_SB_CTRL_FSM 0x13004c
|
|
|
|
|
#define IGU_REG_SB_INT_BEFORE_MASK_LSB 0x13015c
|
|
|
|
|
#define IGU_REG_SB_INT_BEFORE_MASK_MSB 0x130160
|
|
|
|
|
#define IGU_REG_SB_MASK_LSB 0x130164
|
|
|
|
|
#define IGU_REG_SB_MASK_MSB 0x130168
|
|
|
|
|
/* [RW 16] Number of command that were dropped without causing an interrupt
|
|
|
|
|
* due to: read access for WO BAR address; or write access for RO BAR
|
|
|
|
|
* address or any access for reserved address or PCI function error is set
|
|
|
|
|
* and address is not MSIX; PBA or cleanup */
|
|
|
|
|
#define IGU_REG_SILENT_DROP 0x13016c
|
|
|
|
|
/* [RW 10] Number of MSI/MSIX/ATTN messages sent for the function: 0-63 -
|
|
|
|
|
* number of MSIX messages per VF; 64-67 - number of MSI/MSIX messages per
|
|
|
|
|
* PF; 68-71 number of ATTN messages per PF */
|
|
|
|
|
#define IGU_REG_STATISTIC_NUM_MESSAGE_SENT 0x130800
|
|
|
|
|
/* [RW 32] Number of cycles the timer mask masking the IGU interrupt when a
|
|
|
|
|
* timer mask command arrives. Value must be bigger than 100. */
|
|
|
|
|
#define IGU_REG_TIMER_MASKING_VALUE 0x13003c
|
|
|
|
|
#define IGU_REG_TRAILING_EDGE_LATCH 0x130104
|
|
|
|
|
#define IGU_REG_VF_CONFIGURATION 0x130170
|
|
|
|
|
/* [WB_R 32] Each bit represent write done pending bits status for that SB
|
|
|
|
|
* (MSI/MSIX message was sent and write done was not received yet). 0 =
|
|
|
|
|
* clear; 1 = set. Data valid only in addresses 0-4. all the rest are zero. */
|
|
|
|
|
#define IGU_REG_WRITE_DONE_PENDING 0x130480
|
|
|
|
|
#define MCP_A_REG_MCPR_SCRATCH 0x3a0000
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MCP_REG_MCPR_NVM_ACCESS_ENABLE 0x86424
|
|
|
|
|
#define MCP_REG_MCPR_NVM_ADDR 0x8640c
|
|
|
|
|
#define MCP_REG_MCPR_NVM_CFG4 0x8642c
|
|
|
|
|
#define MCP_REG_MCPR_NVM_COMMAND 0x86400
|
|
|
|
|
#define MCP_REG_MCPR_NVM_READ 0x86410
|
|
|
|
|
#define MCP_REG_MCPR_NVM_SW_ARB 0x86420
|
|
|
|
|
#define MCP_REG_MCPR_NVM_WRITE 0x86408
|
|
|
|
|
#define MCP_REG_MCPR_SCRATCH 0xa0000
|
2010-04-19 09:13:12 +08:00
|
|
|
#define MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK (0x1<<1)
|
|
|
|
|
#define MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK (0x1<<0)
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 32] read first 32 bit after inversion of function 0. mapped as
|
|
|
|
|
follows: [0] NIG attention for function0; [1] NIG attention for
|
|
|
|
|
function1; [2] GPIO1 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp;
|
|
|
|
|
[6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9]
|
|
|
|
|
GPIO4 function 1; [10] PCIE glue/PXP VPD event function0; [11] PCIE
|
|
|
|
|
glue/PXP VPD event function1; [12] PCIE glue/PXP Expansion ROM event0;
|
|
|
|
|
[13] PCIE glue/PXP Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16]
|
|
|
|
|
MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB
|
|
|
|
|
Parity error; [19] BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw
|
|
|
|
|
interrupt; [22] SRC Parity error; [23] SRC Hw interrupt; [24] TSDM Parity
|
|
|
|
|
error; [25] TSDM Hw interrupt; [26] TCM Parity error; [27] TCM Hw
|
|
|
|
|
interrupt; [28] TSEMI Parity error; [29] TSEMI Hw interrupt; [30] PBF
|
|
|
|
|
Parity error; [31] PBF Hw interrupt; */
|
|
|
|
|
#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 0xa42c
|
|
|
|
|
#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_1 0xa430
|
|
|
|
|
/* [R 32] read first 32 bit after inversion of mcp. mapped as follows: [0]
|
|
|
|
|
NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
|
|
|
|
|
mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
|
|
|
|
|
[7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
|
|
|
|
|
PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
|
|
|
|
|
function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
|
|
|
|
|
Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
|
|
|
|
|
mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
|
|
|
|
|
BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
|
|
|
|
|
Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
|
|
|
|
|
interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
|
|
|
|
|
Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
|
|
|
|
|
interrupt; */
|
|
|
|
|
#define MISC_REG_AEU_AFTER_INVERT_1_MCP 0xa434
|
|
|
|
|
/* [R 32] read second 32 bit after inversion of function 0. mapped as
|
|
|
|
|
follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
|
|
|
|
|
Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
|
|
|
|
|
interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
|
|
|
|
|
error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
|
|
|
|
|
interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
|
|
|
|
|
NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
|
|
|
|
|
[17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
|
|
|
|
|
interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
|
|
|
|
|
Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
|
|
|
|
|
Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
|
|
|
|
|
Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
|
|
|
|
|
interrupt; */
|
|
|
|
|
#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 0xa438
|
|
|
|
|
#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_1 0xa43c
|
|
|
|
|
/* [R 32] read second 32 bit after inversion of mcp. mapped as follows: [0]
|
|
|
|
|
PBClient Parity error; [1] PBClient Hw interrupt; [2] QM Parity error;
|
|
|
|
|
[3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw interrupt;
|
|
|
|
|
[6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9]
|
|
|
|
|
XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
|
|
|
|
|
DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
|
|
|
|
|
error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
|
|
|
|
|
PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
|
|
|
|
|
[20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
|
|
|
|
|
[23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
|
|
|
|
|
[26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
|
|
|
|
|
[29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */
|
|
|
|
|
#define MISC_REG_AEU_AFTER_INVERT_2_MCP 0xa440
|
|
|
|
|
/* [R 32] read third 32 bit after inversion of function 0. mapped as
|
|
|
|
|
follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity
|
|
|
|
|
error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; [5]
|
|
|
|
|
PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
|
|
|
|
|
interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
|
|
|
|
|
error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
|
|
|
|
|
Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
|
|
|
|
|
pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
|
|
|
|
|
MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
|
|
|
|
|
SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
|
|
|
|
|
timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
|
|
|
|
|
func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
|
|
|
|
|
attn1; */
|
|
|
|
|
#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 0xa444
|
|
|
|
|
#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_1 0xa448
|
|
|
|
|
/* [R 32] read third 32 bit after inversion of mcp. mapped as follows: [0]
|
|
|
|
|
CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity error; [3] PXP
|
|
|
|
|
Hw interrupt; [4] PXPpciClockClient Parity error; [5] PXPpciClockClient
|
|
|
|
|
Hw interrupt; [6] CFC Parity error; [7] CFC Hw interrupt; [8] CDU Parity
|
|
|
|
|
error; [9] CDU Hw interrupt; [10] DMAE Parity error; [11] DMAE Hw
|
|
|
|
|
interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) Hw interrupt; [14]
|
|
|
|
|
MISC Parity error; [15] MISC Hw interrupt; [16] pxp_misc_mps_attn; [17]
|
|
|
|
|
Flash event; [18] SMB event; [19] MCP attn0; [20] MCP attn1; [21] SW
|
|
|
|
|
timers attn_1 func0; [22] SW timers attn_2 func0; [23] SW timers attn_3
|
|
|
|
|
func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW timers attn_1
|
|
|
|
|
func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 func1; [29] SW
|
|
|
|
|
timers attn_4 func1; [30] General attn0; [31] General attn1; */
|
|
|
|
|
#define MISC_REG_AEU_AFTER_INVERT_3_MCP 0xa44c
|
|
|
|
|
/* [R 32] read fourth 32 bit after inversion of function 0. mapped as
|
|
|
|
|
follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
|
|
|
|
|
General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
|
|
|
|
|
[7] General attn9; [8] General attn10; [9] General attn11; [10] General
|
|
|
|
|
attn12; [11] General attn13; [12] General attn14; [13] General attn15;
|
|
|
|
|
[14] General attn16; [15] General attn17; [16] General attn18; [17]
|
|
|
|
|
General attn19; [18] General attn20; [19] General attn21; [20] Main power
|
|
|
|
|
interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
|
|
|
|
|
Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
|
|
|
|
|
Latched timeout attention; [27] GRC Latched reserved access attention;
|
|
|
|
|
[28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
|
|
|
|
|
Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
|
|
|
|
|
#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 0xa450
|
|
|
|
|
#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_1 0xa454
|
|
|
|
|
/* [R 32] read fourth 32 bit after inversion of mcp. mapped as follows: [0]
|
|
|
|
|
General attn2; [1] General attn3; [2] General attn4; [3] General attn5;
|
|
|
|
|
[4] General attn6; [5] General attn7; [6] General attn8; [7] General
|
|
|
|
|
attn9; [8] General attn10; [9] General attn11; [10] General attn12; [11]
|
|
|
|
|
General attn13; [12] General attn14; [13] General attn15; [14] General
|
|
|
|
|
attn16; [15] General attn17; [16] General attn18; [17] General attn19;
|
|
|
|
|
[18] General attn20; [19] General attn21; [20] Main power interrupt; [21]
|
|
|
|
|
RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN Latched attn; [24]
|
|
|
|
|
RBCU Latched attn; [25] RBCP Latched attn; [26] GRC Latched timeout
|
|
|
|
|
attention; [27] GRC Latched reserved access attention; [28] MCP Latched
|
|
|
|
|
rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched
|
|
|
|
|
ump_tx_parity; [31] MCP Latched scpad_parity; */
|
|
|
|
|
#define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [R 32] Read fifth 32 bit after inversion of function 0. Mapped as
|
|
|
|
|
* follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
|
|
|
|
|
* attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
|
|
|
|
|
* CNIG attention (reserved); [7] CNIG parity (reserved); [31-8] Reserved; */
|
|
|
|
|
#define MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 0xa700
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [W 14] write to this register results with the clear of the latched
|
2007-11-16 02:09:02 +08:00
|
|
|
signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in
|
|
|
|
|
d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP
|
|
|
|
|
latch; one in d5 clears GRC Latched timeout attention; one in d6 clears
|
|
|
|
|
GRC Latched reserved access attention; one in d7 clears Latched
|
|
|
|
|
rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears
|
2008-06-24 11:27:52 +08:00
|
|
|
Latched ump_tx_parity; one in d10 clears Latched scpad_parity (both
|
|
|
|
|
ports); one in d11 clears pxpv_misc_mps_attn; one in d12 clears
|
|
|
|
|
pxp_misc_exp_rom_attn0; one in d13 clears pxp_misc_exp_rom_attn1; read
|
|
|
|
|
from this register return zero */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MISC_REG_AEU_CLR_LATCH_SIGNAL 0xa45c
|
|
|
|
|
/* [RW 32] first 32b for enabling the output for function 0 output0. mapped
|
|
|
|
|
as follows: [0] NIG attention for function0; [1] NIG attention for
|
|
|
|
|
function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
|
|
|
|
|
0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
|
|
|
|
|
GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
|
|
|
|
|
function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
|
|
|
|
|
Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
|
|
|
|
|
SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
|
|
|
|
|
indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
|
|
|
|
|
[20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
|
|
|
|
|
SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
|
|
|
|
|
TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
|
|
|
|
|
TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
|
|
|
|
|
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 0xa06c
|
|
|
|
|
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 0xa07c
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2 0xa08c
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3 0xa09c
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_5 0xa0bc
|
|
|
|
|
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_6 0xa0cc
|
|
|
|
|
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_7 0xa0dc
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] first 32b for enabling the output for function 1 output0. mapped
|
|
|
|
|
as follows: [0] NIG attention for function0; [1] NIG attention for
|
|
|
|
|
function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function
|
|
|
|
|
1; [5] GPIO4 function 1; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
|
|
|
|
|
GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
|
|
|
|
|
function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
|
|
|
|
|
Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
|
|
|
|
|
SPIO4; [15] SPIO5; [16] MSI/X indication for function 1; [17] MSI/X
|
|
|
|
|
indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
|
|
|
|
|
[20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
|
|
|
|
|
SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
|
|
|
|
|
TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
|
|
|
|
|
TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
|
|
|
|
|
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 0xa10c
|
|
|
|
|
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 0xa11c
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 0xa12c
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3 0xa13c
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_5 0xa15c
|
|
|
|
|
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_6 0xa16c
|
|
|
|
|
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_7 0xa17c
|
|
|
|
|
/* [RW 32] first 32b for enabling the output for close the gate nig. mapped
|
|
|
|
|
as follows: [0] NIG attention for function0; [1] NIG attention for
|
2007-11-16 02:09:02 +08:00
|
|
|
function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
|
|
|
|
|
0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
|
|
|
|
|
GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
|
|
|
|
|
function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
|
|
|
|
|
Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
|
|
|
|
|
SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
|
|
|
|
|
indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
|
|
|
|
|
[20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
|
|
|
|
|
SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
|
|
|
|
|
TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
|
|
|
|
|
TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
|
|
|
|
|
#define MISC_REG_AEU_ENABLE1_NIG_0 0xa0ec
|
|
|
|
|
#define MISC_REG_AEU_ENABLE1_NIG_1 0xa18c
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] first 32b for enabling the output for close the gate pxp. mapped
|
|
|
|
|
as follows: [0] NIG attention for function0; [1] NIG attention for
|
2007-11-16 02:09:02 +08:00
|
|
|
function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
|
|
|
|
|
0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
|
|
|
|
|
GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
|
|
|
|
|
function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
|
|
|
|
|
Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
|
|
|
|
|
SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
|
|
|
|
|
indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
|
|
|
|
|
[20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
|
|
|
|
|
SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
|
|
|
|
|
TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
|
|
|
|
|
TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
|
|
|
|
|
#define MISC_REG_AEU_ENABLE1_PXP_0 0xa0fc
|
|
|
|
|
#define MISC_REG_AEU_ENABLE1_PXP_1 0xa19c
|
|
|
|
|
/* [RW 32] second 32b for enabling the output for function 0 output0. mapped
|
|
|
|
|
as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
|
|
|
|
|
Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
|
|
|
|
|
interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
|
|
|
|
|
error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
|
|
|
|
|
interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
|
|
|
|
|
NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
|
|
|
|
|
[17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
|
|
|
|
|
interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
|
|
|
|
|
Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
|
|
|
|
|
Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
|
|
|
|
|
Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
|
|
|
|
|
interrupt; */
|
|
|
|
|
#define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0 0xa070
|
|
|
|
|
#define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_1 0xa080
|
|
|
|
|
/* [RW 32] second 32b for enabling the output for function 1 output0. mapped
|
|
|
|
|
as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
|
|
|
|
|
Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
|
|
|
|
|
interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
|
|
|
|
|
error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
|
|
|
|
|
interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
|
|
|
|
|
NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
|
|
|
|
|
[17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
|
|
|
|
|
interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
|
|
|
|
|
Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
|
|
|
|
|
Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
|
|
|
|
|
Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
|
|
|
|
|
interrupt; */
|
|
|
|
|
#define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0 0xa110
|
|
|
|
|
#define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1 0xa120
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] second 32b for enabling the output for close the gate nig. mapped
|
|
|
|
|
as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
|
|
|
|
|
Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
|
|
|
|
|
interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
|
|
|
|
|
error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
|
|
|
|
|
interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
|
|
|
|
|
NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
|
|
|
|
|
[17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
|
|
|
|
|
interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
|
|
|
|
|
Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
|
|
|
|
|
Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
|
|
|
|
|
Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
|
|
|
|
|
interrupt; */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MISC_REG_AEU_ENABLE2_NIG_0 0xa0f0
|
|
|
|
|
#define MISC_REG_AEU_ENABLE2_NIG_1 0xa190
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] second 32b for enabling the output for close the gate pxp. mapped
|
|
|
|
|
as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
|
|
|
|
|
Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
|
|
|
|
|
interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
|
|
|
|
|
error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
|
|
|
|
|
interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
|
|
|
|
|
NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
|
|
|
|
|
[17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
|
|
|
|
|
interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
|
|
|
|
|
Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
|
|
|
|
|
Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
|
|
|
|
|
Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
|
|
|
|
|
interrupt; */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MISC_REG_AEU_ENABLE2_PXP_0 0xa100
|
|
|
|
|
#define MISC_REG_AEU_ENABLE2_PXP_1 0xa1a0
|
|
|
|
|
/* [RW 32] third 32b for enabling the output for function 0 output0. mapped
|
|
|
|
|
as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
|
|
|
|
|
Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
|
|
|
|
|
[5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
|
|
|
|
|
interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
|
|
|
|
|
error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
|
|
|
|
|
Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
|
|
|
|
|
pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
|
|
|
|
|
MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
|
|
|
|
|
SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
|
|
|
|
|
timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
|
|
|
|
|
func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
|
|
|
|
|
attn1; */
|
|
|
|
|
#define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_0 0xa074
|
|
|
|
|
#define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_1 0xa084
|
|
|
|
|
/* [RW 32] third 32b for enabling the output for function 1 output0. mapped
|
|
|
|
|
as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
|
|
|
|
|
Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
|
|
|
|
|
[5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
|
|
|
|
|
interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
|
|
|
|
|
error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
|
|
|
|
|
Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
|
|
|
|
|
pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
|
|
|
|
|
MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
|
|
|
|
|
SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
|
|
|
|
|
timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
|
|
|
|
|
func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
|
|
|
|
|
attn1; */
|
|
|
|
|
#define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0 0xa114
|
|
|
|
|
#define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1 0xa124
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] third 32b for enabling the output for close the gate nig. mapped
|
|
|
|
|
as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
|
|
|
|
|
Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
|
|
|
|
|
[5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
|
|
|
|
|
interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
|
|
|
|
|
error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
|
|
|
|
|
Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
|
|
|
|
|
pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
|
|
|
|
|
MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
|
|
|
|
|
SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
|
|
|
|
|
timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
|
|
|
|
|
func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
|
|
|
|
|
attn1; */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MISC_REG_AEU_ENABLE3_NIG_0 0xa0f4
|
|
|
|
|
#define MISC_REG_AEU_ENABLE3_NIG_1 0xa194
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] third 32b for enabling the output for close the gate pxp. mapped
|
|
|
|
|
as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
|
|
|
|
|
Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
|
|
|
|
|
[5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
|
|
|
|
|
interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
|
|
|
|
|
error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
|
|
|
|
|
Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
|
|
|
|
|
pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
|
|
|
|
|
MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
|
|
|
|
|
SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
|
|
|
|
|
timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
|
|
|
|
|
func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
|
|
|
|
|
attn1; */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MISC_REG_AEU_ENABLE3_PXP_0 0xa104
|
|
|
|
|
#define MISC_REG_AEU_ENABLE3_PXP_1 0xa1a4
|
|
|
|
|
/* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped
|
|
|
|
|
as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
|
|
|
|
|
General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
|
|
|
|
|
[7] General attn9; [8] General attn10; [9] General attn11; [10] General
|
|
|
|
|
attn12; [11] General attn13; [12] General attn14; [13] General attn15;
|
|
|
|
|
[14] General attn16; [15] General attn17; [16] General attn18; [17]
|
|
|
|
|
General attn19; [18] General attn20; [19] General attn21; [20] Main power
|
|
|
|
|
interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
|
|
|
|
|
Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
|
|
|
|
|
Latched timeout attention; [27] GRC Latched reserved access attention;
|
|
|
|
|
[28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
|
|
|
|
|
Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
|
|
|
|
|
#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 0xa078
|
|
|
|
|
#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2 0xa098
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_4 0xa0b8
|
|
|
|
|
#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_5 0xa0c8
|
|
|
|
|
#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_6 0xa0d8
|
|
|
|
|
#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_7 0xa0e8
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped
|
|
|
|
|
as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
|
|
|
|
|
General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
|
|
|
|
|
[7] General attn9; [8] General attn10; [9] General attn11; [10] General
|
|
|
|
|
attn12; [11] General attn13; [12] General attn14; [13] General attn15;
|
|
|
|
|
[14] General attn16; [15] General attn17; [16] General attn18; [17]
|
|
|
|
|
General attn19; [18] General attn20; [19] General attn21; [20] Main power
|
|
|
|
|
interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
|
|
|
|
|
Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
|
|
|
|
|
Latched timeout attention; [27] GRC Latched reserved access attention;
|
|
|
|
|
[28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
|
|
|
|
|
Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
|
|
|
|
|
#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 0xa118
|
|
|
|
|
#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2 0xa138
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_4 0xa158
|
|
|
|
|
#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_5 0xa168
|
|
|
|
|
#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_6 0xa178
|
|
|
|
|
#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_7 0xa188
|
|
|
|
|
/* [RW 32] fourth 32b for enabling the output for close the gate nig.mapped
|
|
|
|
|
as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
|
|
|
|
|
General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
|
|
|
|
|
[7] General attn9; [8] General attn10; [9] General attn11; [10] General
|
|
|
|
|
attn12; [11] General attn13; [12] General attn14; [13] General attn15;
|
|
|
|
|
[14] General attn16; [15] General attn17; [16] General attn18; [17]
|
|
|
|
|
General attn19; [18] General attn20; [19] General attn21; [20] Main power
|
|
|
|
|
interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
|
|
|
|
|
Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
|
|
|
|
|
Latched timeout attention; [27] GRC Latched reserved access attention;
|
|
|
|
|
[28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
|
|
|
|
|
Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MISC_REG_AEU_ENABLE4_NIG_0 0xa0f8
|
|
|
|
|
#define MISC_REG_AEU_ENABLE4_NIG_1 0xa198
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] fourth 32b for enabling the output for close the gate pxp.mapped
|
|
|
|
|
as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
|
|
|
|
|
General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
|
|
|
|
|
[7] General attn9; [8] General attn10; [9] General attn11; [10] General
|
|
|
|
|
attn12; [11] General attn13; [12] General attn14; [13] General attn15;
|
|
|
|
|
[14] General attn16; [15] General attn17; [16] General attn18; [17]
|
|
|
|
|
General attn19; [18] General attn20; [19] General attn21; [20] Main power
|
|
|
|
|
interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
|
|
|
|
|
Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
|
|
|
|
|
Latched timeout attention; [27] GRC Latched reserved access attention;
|
|
|
|
|
[28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
|
|
|
|
|
Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MISC_REG_AEU_ENABLE4_PXP_0 0xa108
|
|
|
|
|
#define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8
|
|
|
|
|
/* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu
|
|
|
|
|
128 bit vector */
|
|
|
|
|
#define MISC_REG_AEU_GENERAL_ATTN_0 0xa000
|
|
|
|
|
#define MISC_REG_AEU_GENERAL_ATTN_1 0xa004
|
|
|
|
|
#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
|
|
|
|
|
#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
|
|
|
|
|
#define MISC_REG_AEU_GENERAL_ATTN_12 0xa030
|
|
|
|
|
#define MISC_REG_AEU_GENERAL_ATTN_2 0xa008
|
|
|
|
|
#define MISC_REG_AEU_GENERAL_ATTN_3 0xa00c
|
|
|
|
|
#define MISC_REG_AEU_GENERAL_ATTN_4 0xa010
|
|
|
|
|
#define MISC_REG_AEU_GENERAL_ATTN_5 0xa014
|
|
|
|
|
#define MISC_REG_AEU_GENERAL_ATTN_6 0xa018
|
2008-02-29 03:51:50 +08:00
|
|
|
#define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c
|
|
|
|
|
#define MISC_REG_AEU_GENERAL_ATTN_8 0xa020
|
|
|
|
|
#define MISC_REG_AEU_GENERAL_ATTN_9 0xa024
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MISC_REG_AEU_GENERAL_MASK 0xa61c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] first 32b for inverting the input for function 0; for each bit:
|
|
|
|
|
0= do not invert; 1= invert; mapped as follows: [0] NIG attention for
|
|
|
|
|
function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp;
|
|
|
|
|
[4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; [7] GPIO2 function 1;
|
|
|
|
|
[8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
|
|
|
|
|
function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
|
|
|
|
|
Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
|
|
|
|
|
SPIO4; [15] SPIO5; [16] MSI/X indication for mcp; [17] MSI/X indication
|
|
|
|
|
for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; [20] PRS
|
|
|
|
|
Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] SRC Hw
|
|
|
|
|
interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] TCM
|
|
|
|
|
Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] TSEMI
|
|
|
|
|
Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
|
|
|
|
|
#define MISC_REG_AEU_INVERTER_1_FUNC_0 0xa22c
|
|
|
|
|
#define MISC_REG_AEU_INVERTER_1_FUNC_1 0xa23c
|
|
|
|
|
/* [RW 32] second 32b for inverting the input for function 0; for each bit:
|
|
|
|
|
0= do not invert; 1= invert. mapped as follows: [0] PBClient Parity
|
|
|
|
|
error; [1] PBClient Hw interrupt; [2] QM Parity error; [3] QM Hw
|
|
|
|
|
interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; [6] XSDM
|
|
|
|
|
Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] XCM Hw
|
|
|
|
|
interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
|
|
|
|
|
DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
|
|
|
|
|
error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
|
|
|
|
|
PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
|
|
|
|
|
[20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
|
|
|
|
|
[23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
|
|
|
|
|
[26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
|
|
|
|
|
[29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */
|
|
|
|
|
#define MISC_REG_AEU_INVERTER_2_FUNC_0 0xa230
|
|
|
|
|
#define MISC_REG_AEU_INVERTER_2_FUNC_1 0xa240
|
|
|
|
|
/* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0;
|
2008-06-24 11:27:52 +08:00
|
|
|
[9:8] = raserved. Zero = mask; one = unmask */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MISC_REG_AEU_MASK_ATTN_FUNC_0 0xa060
|
|
|
|
|
#define MISC_REG_AEU_MASK_ATTN_FUNC_1 0xa064
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 1] If set a system kill occurred */
|
|
|
|
|
#define MISC_REG_AEU_SYS_KILL_OCCURRED 0xa610
|
|
|
|
|
/* [RW 32] Represent the status of the input vector to the AEU when a system
|
|
|
|
|
kill occurred. The register is reset in por reset. Mapped as follows: [0]
|
|
|
|
|
NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
|
|
|
|
|
mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
|
|
|
|
|
[7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
|
|
|
|
|
PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
|
|
|
|
|
function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
|
|
|
|
|
Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
|
|
|
|
|
mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
|
|
|
|
|
BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
|
|
|
|
|
Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
|
|
|
|
|
interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
|
|
|
|
|
Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
|
|
|
|
|
interrupt; */
|
|
|
|
|
#define MISC_REG_AEU_SYS_KILL_STATUS_0 0xa600
|
|
|
|
|
#define MISC_REG_AEU_SYS_KILL_STATUS_1 0xa604
|
|
|
|
|
#define MISC_REG_AEU_SYS_KILL_STATUS_2 0xa608
|
|
|
|
|
#define MISC_REG_AEU_SYS_KILL_STATUS_3 0xa60c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 4] This field indicates the type of the device. '0' - 2 Ports; '1' - 1
|
|
|
|
|
Port. */
|
|
|
|
|
#define MISC_REG_BOND_ID 0xa400
|
|
|
|
|
/* [R 8] These bits indicate the metal revision of the chip. This value
|
|
|
|
|
starts at 0x00 for each all-layer tape-out and increments by one for each
|
|
|
|
|
tape-out. */
|
|
|
|
|
#define MISC_REG_CHIP_METAL 0xa404
|
|
|
|
|
/* [R 16] These bits indicate the part number for the chip. */
|
|
|
|
|
#define MISC_REG_CHIP_NUM 0xa408
|
|
|
|
|
/* [R 4] These bits indicate the base revision of the chip. This value
|
|
|
|
|
starts at 0x0 for the A0 tape-out and increments by one for each
|
|
|
|
|
all-layer tape-out. */
|
|
|
|
|
#define MISC_REG_CHIP_REV 0xa40c
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The following driver registers(1...16) represent 16 drivers and
|
|
|
|
|
32 clients. Each client can be controlled by one driver only. One in each
|
2008-02-29 03:51:50 +08:00
|
|
|
bit represent that this driver control the appropriate client (Ex: bit 5
|
|
|
|
|
is set means this driver control client number 5). addr1 = set; addr0 =
|
|
|
|
|
clear; read from both addresses will give the same result = status. write
|
|
|
|
|
to address 1 will set a request to control all the clients that their
|
|
|
|
|
appropriate bit (in the write command) is set. if the client is free (the
|
|
|
|
|
appropriate bit in all the other drivers is clear) one will be written to
|
|
|
|
|
that driver register; if the client isn't free the bit will remain zero.
|
|
|
|
|
if the appropriate bit is set (the driver request to gain control on a
|
|
|
|
|
client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
|
|
|
|
|
interrupt will be asserted). write to address 0 will set a request to
|
|
|
|
|
free all the clients that their appropriate bit (in the write command) is
|
|
|
|
|
set. if the appropriate bit is clear (the driver request to free a client
|
|
|
|
|
it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
|
|
|
|
|
be asserted). */
|
|
|
|
|
#define MISC_REG_DRIVER_CONTROL_1 0xa510
|
2008-08-14 06:50:23 +08:00
|
|
|
#define MISC_REG_DRIVER_CONTROL_7 0xa3c8
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0
|
|
|
|
|
only. */
|
|
|
|
|
#define MISC_REG_E1HMF_MODE 0xa5f8
|
2009-08-13 13:53:28 +08:00
|
|
|
/* [RW 32] Debug only: spare RW register reset by core reset */
|
|
|
|
|
#define MISC_REG_GENERIC_CR_0 0xa460
|
2010-10-06 11:28:26 +08:00
|
|
|
#define MISC_REG_GENERIC_CR_1 0xa464
|
2010-04-19 09:13:12 +08:00
|
|
|
/* [RW 32] Debug only: spare RW register reset by por reset */
|
|
|
|
|
#define MISC_REG_GENERIC_POR_1 0xa474
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of
|
|
|
|
|
these bits is written as a '1'; the corresponding SPIO bit will turn off
|
|
|
|
|
it's drivers and become an input. This is the reset state of all GPIO
|
|
|
|
|
pins. The read value of these bits will be a '1' if that last command
|
|
|
|
|
(#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff).
|
|
|
|
|
[23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written
|
|
|
|
|
as a '1'; the corresponding GPIO bit will drive low. The read value of
|
|
|
|
|
these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for
|
|
|
|
|
this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0;
|
|
|
|
|
SET When any of these bits is written as a '1'; the corresponding GPIO
|
|
|
|
|
bit will drive high (if it has that capability). The read value of these
|
|
|
|
|
bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this
|
|
|
|
|
bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0;
|
|
|
|
|
RO; These bits indicate the read value of each of the eight GPIO pins.
|
|
|
|
|
This is the result value of the pin; not the drive value. Writing these
|
|
|
|
|
bits will have not effect. */
|
|
|
|
|
#define MISC_REG_GPIO 0xa490
|
2009-02-12 16:36:52 +08:00
|
|
|
/* [RW 8] These bits enable the GPIO_INTs to signals event to the
|
|
|
|
|
IGU/MCP.according to the following map: [0] p0_gpio_0; [1] p0_gpio_1; [2]
|
|
|
|
|
p0_gpio_2; [3] p0_gpio_3; [4] p1_gpio_0; [5] p1_gpio_1; [6] p1_gpio_2;
|
|
|
|
|
[7] p1_gpio_3; */
|
|
|
|
|
#define MISC_REG_GPIO_EVENT_EN 0xa2bc
|
|
|
|
|
/* [RW 32] GPIO INT. [31-28] OLD_CLR port1; [27-24] OLD_CLR port0; Writing a
|
|
|
|
|
'1' to these bit clears the corresponding bit in the #OLD_VALUE register.
|
|
|
|
|
This will acknowledge an interrupt on the falling edge of corresponding
|
|
|
|
|
GPIO input (reset value 0). [23-16] OLD_SET [23-16] port1; OLD_SET port0;
|
|
|
|
|
Writing a '1' to these bit sets the corresponding bit in the #OLD_VALUE
|
|
|
|
|
register. This will acknowledge an interrupt on the rising edge of
|
|
|
|
|
corresponding SPIO input (reset value 0). [15-12] OLD_VALUE [11-8] port1;
|
|
|
|
|
OLD_VALUE port0; RO; These bits indicate the old value of the GPIO input
|
|
|
|
|
value. When the ~INT_STATE bit is set; this bit indicates the OLD value
|
|
|
|
|
of the pin such that if ~INT_STATE is set and this bit is '0'; then the
|
|
|
|
|
interrupt is due to a low to high edge. If ~INT_STATE is set and this bit
|
|
|
|
|
is '1'; then the interrupt is due to a high to low edge (reset value 0).
|
|
|
|
|
[7-4] INT_STATE port1; [3-0] INT_STATE RO port0; These bits indicate the
|
|
|
|
|
current GPIO interrupt state for each GPIO pin. This bit is cleared when
|
|
|
|
|
the appropriate #OLD_SET or #OLD_CLR command bit is written. This bit is
|
|
|
|
|
set when the GPIO input does not match the current value in #OLD_VALUE
|
|
|
|
|
(reset value 0). */
|
|
|
|
|
#define MISC_REG_GPIO_INT 0xa494
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 28] this field hold the last information that caused reserved
|
|
|
|
|
attention. bits [19:0] - address; [22:20] function; [23] reserved;
|
2008-08-14 06:59:08 +08:00
|
|
|
[27:24] the master that caused the attention - according to the following
|
2008-06-24 11:27:52 +08:00
|
|
|
encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
|
|
|
|
|
dbu; 8 = dmae */
|
|
|
|
|
#define MISC_REG_GRC_RSV_ATTN 0xa3c0
|
|
|
|
|
/* [R 28] this field hold the last information that caused timeout
|
|
|
|
|
attention. bits [19:0] - address; [22:20] function; [23] reserved;
|
2008-08-14 06:59:08 +08:00
|
|
|
[27:24] the master that caused the attention - according to the following
|
2008-06-24 11:27:52 +08:00
|
|
|
encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
|
|
|
|
|
dbu; 8 = dmae */
|
|
|
|
|
#define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Setting this bit enables a timer in the GRC block to timeout any
|
|
|
|
|
access that does not finish within
|
|
|
|
|
~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is
|
|
|
|
|
cleared; this timeout is disabled. If this timeout occurs; the GRC shall
|
|
|
|
|
assert it attention output. */
|
|
|
|
|
#define MISC_REG_GRC_TIMEOUT_EN 0xa280
|
|
|
|
|
/* [RW 28] 28 LSB of LCPLL first register; reset val = 521. inside order of
|
|
|
|
|
the bits is: [2:0] OAC reset value 001) CML output buffer bias control;
|
|
|
|
|
111 for +40%; 011 for +20%; 001 for 0%; 000 for -20%. [5:3] Icp_ctrl
|
|
|
|
|
(reset value 001) Charge pump current control; 111 for 720u; 011 for
|
|
|
|
|
600u; 001 for 480u and 000 for 360u. [7:6] Bias_ctrl (reset value 00)
|
|
|
|
|
Global bias control; When bit 7 is high bias current will be 10 0gh; When
|
|
|
|
|
bit 6 is high bias will be 100w; Valid values are 00; 10; 01. [10:8]
|
|
|
|
|
Pll_observe (reset value 010) Bits to control observability. bit 10 is
|
|
|
|
|
for test bias; bit 9 is for test CK; bit 8 is test Vc. [12:11] Vth_ctrl
|
|
|
|
|
(reset value 00) Comparator threshold control. 00 for 0.6V; 01 for 0.54V
|
|
|
|
|
and 10 for 0.66V. [13] pllSeqStart (reset value 0) Enables VCO tuning
|
|
|
|
|
sequencer: 1= sequencer disabled; 0= sequencer enabled (inverted
|
|
|
|
|
internally). [14] reserved (reset value 0) Reset for VCO sequencer is
|
|
|
|
|
connected to RESET input directly. [15] capRetry_en (reset value 0)
|
|
|
|
|
enable retry on cap search failure (inverted). [16] freqMonitor_e (reset
|
|
|
|
|
value 0) bit to continuously monitor vco freq (inverted). [17]
|
|
|
|
|
freqDetRestart_en (reset value 0) bit to enable restart when not freq
|
|
|
|
|
locked (inverted). [18] freqDetRetry_en (reset value 0) bit to enable
|
|
|
|
|
retry on freq det failure(inverted). [19] pllForceFdone_en (reset value
|
|
|
|
|
0) bit to enable pllForceFdone & pllForceFpass into pllSeq. [20]
|
|
|
|
|
pllForceFdone (reset value 0) bit to force freqDone. [21] pllForceFpass
|
|
|
|
|
(reset value 0) bit to force freqPass. [22] pllForceDone_en (reset value
|
|
|
|
|
0) bit to enable pllForceCapDone. [23] pllForceCapDone (reset value 0)
|
|
|
|
|
bit to force capDone. [24] pllForceCapPass_en (reset value 0) bit to
|
|
|
|
|
enable pllForceCapPass. [25] pllForceCapPass (reset value 0) bit to force
|
|
|
|
|
capPass. [26] capRestart (reset value 0) bit to force cap sequencer to
|
|
|
|
|
restart. [27] capSelectM_en (reset value 0) bit to enable cap select
|
|
|
|
|
register bits. */
|
|
|
|
|
#define MISC_REG_LCPLL_CTRL_1 0xa2a4
|
|
|
|
|
#define MISC_REG_LCPLL_CTRL_REG_2 0xa2a8
|
|
|
|
|
/* [RW 4] Interrupt mask register #0 read/write */
|
|
|
|
|
#define MISC_REG_MISC_INT_MASK 0xa388
|
|
|
|
|
/* [RW 1] Parity mask register #0 read/write */
|
|
|
|
|
#define MISC_REG_MISC_PRTY_MASK 0xa398
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 1] Parity register #0 read */
|
|
|
|
|
#define MISC_REG_MISC_PRTY_STS 0xa38c
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MISC_REG_NIG_WOL_P0 0xa270
|
|
|
|
|
#define MISC_REG_NIG_WOL_P1 0xa274
|
|
|
|
|
/* [R 1] If set indicate that the pcie_rst_b was asserted without perst
|
|
|
|
|
assertion */
|
|
|
|
|
#define MISC_REG_PCIE_HOT_RESET 0xa618
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911.
|
|
|
|
|
inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1
|
|
|
|
|
divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1
|
|
|
|
|
divider[3] (reset value 0); [4] P2 divider[0] (reset value 1); [5] P2
|
|
|
|
|
divider[1] (reset value 0); [6] P2 divider[2] (reset value 0); [7] P2
|
|
|
|
|
divider[3] (reset value 0); [8] ph_det_dis (reset value 1); [9]
|
|
|
|
|
freq_det_dis (reset value 0); [10] Icpx[0] (reset value 0); [11] Icpx[1]
|
|
|
|
|
(reset value 1); [12] Icpx[2] (reset value 0); [13] Icpx[3] (reset value
|
|
|
|
|
1); [14] Icpx[4] (reset value 0); [15] Icpx[5] (reset value 0); [16]
|
|
|
|
|
Rx[0] (reset value 1); [17] Rx[1] (reset value 0); [18] vc_en (reset
|
|
|
|
|
value 1); [19] vco_rng[0] (reset value 1); [20] vco_rng[1] (reset value
|
|
|
|
|
1); [21] Kvco_xf[0] (reset value 0); [22] Kvco_xf[1] (reset value 0);
|
|
|
|
|
[23] Kvco_xf[2] (reset value 0); [24] Kvco_xs[0] (reset value 1); [25]
|
|
|
|
|
Kvco_xs[1] (reset value 1); [26] Kvco_xs[2] (reset value 1); [27]
|
|
|
|
|
testd_en (reset value 0); [28] testd_sel[0] (reset value 0); [29]
|
|
|
|
|
testd_sel[1] (reset value 0); [30] testd_sel[2] (reset value 0); [31]
|
|
|
|
|
testa_en (reset value 0); */
|
|
|
|
|
#define MISC_REG_PLL_STORM_CTRL_1 0xa294
|
|
|
|
|
#define MISC_REG_PLL_STORM_CTRL_2 0xa298
|
|
|
|
|
#define MISC_REG_PLL_STORM_CTRL_3 0xa29c
|
|
|
|
|
#define MISC_REG_PLL_STORM_CTRL_4 0xa2a0
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [R 1] Status of 4 port mode enable input pin. */
|
|
|
|
|
#define MISC_REG_PORT4MODE_EN 0xa750
|
|
|
|
|
/* [RW 2] 4 port mode enable overwrite.[0] - Overwrite control; if it is 0 -
|
|
|
|
|
* the port4mode_en output is equal to 4 port mode input pin; if it is 1 -
|
|
|
|
|
* the port4mode_en output is equal to bit[1] of this register; [1] -
|
|
|
|
|
* Overwrite value. If bit[0] of this register is 1 this is the value that
|
|
|
|
|
* receives the port4mode_en output . */
|
|
|
|
|
#define MISC_REG_PORT4MODE_EN_OVWR 0xa720
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] reset reg#2; rite/read one = the specific block is out of reset;
|
2007-11-16 02:09:02 +08:00
|
|
|
write/read zero = the specific block is in reset; addr 0-wr- the write
|
|
|
|
|
value will be written to the register; addr 1-set - one will be written
|
|
|
|
|
to all the bits that have the value of one in the data written (bits that
|
|
|
|
|
have the value of zero will not be change) ; addr 2-clear - zero will be
|
|
|
|
|
written to all the bits that have the value of one in the data written
|
|
|
|
|
(bits that have the value of zero will not be change); addr 3-ignore;
|
|
|
|
|
read ignore from all addr except addr 00; inside order of the bits is:
|
2008-06-24 11:27:52 +08:00
|
|
|
[0] rst_bmac0; [1] rst_bmac1; [2] rst_emac0; [3] rst_emac1; [4] rst_grc;
|
|
|
|
|
[5] rst_mcp_n_reset_reg_hard_core; [6] rst_ mcp_n_hard_core_rst_b; [7]
|
|
|
|
|
rst_ mcp_n_reset_cmn_cpu; [8] rst_ mcp_n_reset_cmn_core; [9] rst_rbcn;
|
|
|
|
|
[10] rst_dbg; [11] rst_misc_core; [12] rst_dbue (UART); [13]
|
|
|
|
|
Pci_resetmdio_n; [14] rst_emac0_hard_core; [15] rst_emac1_hard_core; 16]
|
|
|
|
|
rst_pxp_rq_rd_wr; 31:17] reserved */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MISC_REG_RESET_REG_2 0xa590
|
|
|
|
|
/* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is
|
|
|
|
|
shared with the driver resides */
|
|
|
|
|
#define MISC_REG_SHARED_MEM_ADDR 0xa2b4
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1';
|
|
|
|
|
the corresponding SPIO bit will turn off it's drivers and become an
|
|
|
|
|
input. This is the reset state of all SPIO pins. The read value of these
|
|
|
|
|
bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this
|
|
|
|
|
bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits
|
|
|
|
|
is written as a '1'; the corresponding SPIO bit will drive low. The read
|
|
|
|
|
value of these bits will be a '1' if that last command (#SET; #CLR; or
|
|
|
|
|
#FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of
|
|
|
|
|
these bits is written as a '1'; the corresponding SPIO bit will drive
|
|
|
|
|
high (if it has that capability). The read value of these bits will be a
|
|
|
|
|
'1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET.
|
|
|
|
|
(reset value 0). [7-0] VALUE RO; These bits indicate the read value of
|
|
|
|
|
each of the eight SPIO pins. This is the result value of the pin; not the
|
|
|
|
|
drive value. Writing these bits will have not effect. Each 8 bits field
|
|
|
|
|
is divided as follows: [0] VAUX Enable; when pulsed low; enables supply
|
|
|
|
|
from VAUX. (This is an output pin only; the FLOAT field is not applicable
|
|
|
|
|
for this pin); [1] VAUX Disable; when pulsed low; disables supply form
|
|
|
|
|
VAUX. (This is an output pin only; FLOAT field is not applicable for this
|
|
|
|
|
pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to
|
|
|
|
|
select VAUX supply. (This is an output pin only; it is not controlled by
|
|
|
|
|
the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT
|
|
|
|
|
field is not applicable for this pin; only the VALUE fields is relevant -
|
2008-06-24 11:27:52 +08:00
|
|
|
it reflects the output value); [3] port swap [4] spio_4; [5] spio_5; [6]
|
2008-02-29 03:51:50 +08:00
|
|
|
Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP
|
|
|
|
|
device ID select; read by UMP firmware. */
|
|
|
|
|
#define MISC_REG_SPIO 0xa4fc
|
|
|
|
|
/* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC.
|
|
|
|
|
according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5;
|
|
|
|
|
[7:0] reserved */
|
|
|
|
|
#define MISC_REG_SPIO_EVENT_EN 0xa2b8
|
|
|
|
|
/* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the
|
|
|
|
|
corresponding bit in the #OLD_VALUE register. This will acknowledge an
|
|
|
|
|
interrupt on the falling edge of corresponding SPIO input (reset value
|
|
|
|
|
0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit
|
|
|
|
|
in the #OLD_VALUE register. This will acknowledge an interrupt on the
|
|
|
|
|
rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE
|
|
|
|
|
RO; These bits indicate the old value of the SPIO input value. When the
|
|
|
|
|
~INT_STATE bit is set; this bit indicates the OLD value of the pin such
|
|
|
|
|
that if ~INT_STATE is set and this bit is '0'; then the interrupt is due
|
|
|
|
|
to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the
|
|
|
|
|
interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE
|
|
|
|
|
RO; These bits indicate the current SPIO interrupt state for each SPIO
|
|
|
|
|
pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR
|
|
|
|
|
command bit is written. This bit is set when the SPIO input does not
|
|
|
|
|
match the current value in #OLD_VALUE (reset value 0). */
|
|
|
|
|
#define MISC_REG_SPIO_INT 0xa500
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 32] reload value for counter 4 if reload; the value will be reload if
|
|
|
|
|
the counter reached zero and the reload bit
|
|
|
|
|
(~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */
|
|
|
|
|
#define MISC_REG_SW_TIMER_RELOAD_VAL_4 0xa2fc
|
|
|
|
|
/* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses
|
2010-04-19 09:13:12 +08:00
|
|
|
in this register. addres 0 - timer 1; address 1 - timer 2, ... address 7 -
|
2009-02-16 15:24:08 +08:00
|
|
|
timer 8 */
|
|
|
|
|
#define MISC_REG_SW_TIMER_VAL 0xa5c0
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
|
|
|
|
|
loaded; 0-prepare; -unprepare */
|
|
|
|
|
#define MISC_REG_UNPREPARED 0xa424
|
2009-07-29 08:20:04 +08:00
|
|
|
#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST (0x1<<0)
|
|
|
|
|
#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST (0x1<<1)
|
|
|
|
|
#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN (0x1<<4)
|
|
|
|
|
#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST (0x1<<2)
|
|
|
|
|
#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN (0x1<<3)
|
2007-11-16 02:09:02 +08:00
|
|
|
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0)
|
|
|
|
|
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9)
|
|
|
|
|
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15)
|
|
|
|
|
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS (0xf<<18)
|
|
|
|
|
/* [RW 1] Input enable for RX_BMAC0 IF */
|
|
|
|
|
#define NIG_REG_BMAC0_IN_EN 0x100ac
|
|
|
|
|
/* [RW 1] output enable for TX_BMAC0 IF */
|
|
|
|
|
#define NIG_REG_BMAC0_OUT_EN 0x100e0
|
|
|
|
|
/* [RW 1] output enable for TX BMAC pause port 0 IF */
|
|
|
|
|
#define NIG_REG_BMAC0_PAUSE_OUT_EN 0x10110
|
|
|
|
|
/* [RW 1] output enable for RX_BMAC0_REGS IF */
|
|
|
|
|
#define NIG_REG_BMAC0_REGS_OUT_EN 0x100e8
|
|
|
|
|
/* [RW 1] output enable for RX BRB1 port0 IF */
|
|
|
|
|
#define NIG_REG_BRB0_OUT_EN 0x100f8
|
|
|
|
|
/* [RW 1] Input enable for TX BRB1 pause port 0 IF */
|
|
|
|
|
#define NIG_REG_BRB0_PAUSE_IN_EN 0x100c4
|
|
|
|
|
/* [RW 1] output enable for RX BRB1 port1 IF */
|
|
|
|
|
#define NIG_REG_BRB1_OUT_EN 0x100fc
|
|
|
|
|
/* [RW 1] Input enable for TX BRB1 pause port 1 IF */
|
|
|
|
|
#define NIG_REG_BRB1_PAUSE_IN_EN 0x100c8
|
|
|
|
|
/* [RW 1] output enable for RX BRB1 LP IF */
|
|
|
|
|
#define NIG_REG_BRB_LB_OUT_EN 0x10100
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [WB_W 82] Debug packet to LP from RBC; Data spelling:[63:0] data; 64]
|
|
|
|
|
error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush;
|
|
|
|
|
72:73]-vnic_num; 81:74]-sideband_info */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define NIG_REG_DEBUG_PACKET_LB 0x10800
|
|
|
|
|
/* [RW 1] Input enable for TX Debug packet */
|
|
|
|
|
#define NIG_REG_EGRESS_DEBUG_IN_EN 0x100dc
|
|
|
|
|
/* [RW 1] If 1 - egress drain mode for port0 is active. In this mode all
|
|
|
|
|
packets from PBFare not forwarded to the MAC and just deleted from FIFO.
|
|
|
|
|
First packet may be deleted from the middle. And last packet will be
|
|
|
|
|
always deleted till the end. */
|
|
|
|
|
#define NIG_REG_EGRESS_DRAIN0_MODE 0x10060
|
|
|
|
|
/* [RW 1] Output enable to EMAC0 */
|
|
|
|
|
#define NIG_REG_EGRESS_EMAC0_OUT_EN 0x10120
|
|
|
|
|
/* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs
|
|
|
|
|
to emac for port0; other way to bmac for port0 */
|
|
|
|
|
#define NIG_REG_EGRESS_EMAC0_PORT 0x10058
|
|
|
|
|
/* [RW 1] Input enable for TX PBF user packet port0 IF */
|
|
|
|
|
#define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc
|
|
|
|
|
/* [RW 1] Input enable for TX PBF user packet port1 IF */
|
|
|
|
|
#define NIG_REG_EGRESS_PBF1_IN_EN 0x100d0
|
2009-07-21 13:47:22 +08:00
|
|
|
/* [RW 1] Input enable for TX UMP management packet port0 IF */
|
|
|
|
|
#define NIG_REG_EGRESS_UMP0_IN_EN 0x100d4
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Input enable for RX_EMAC0 IF */
|
|
|
|
|
#define NIG_REG_EMAC0_IN_EN 0x100a4
|
|
|
|
|
/* [RW 1] output enable for TX EMAC pause port 0 IF */
|
|
|
|
|
#define NIG_REG_EMAC0_PAUSE_OUT_EN 0x10118
|
|
|
|
|
/* [R 1] status from emac0. This bit is set when MDINT from either the
|
|
|
|
|
EXT_MDINT pin or from the Copper PHY is driven low. This condition must
|
|
|
|
|
be cleared in the attached PHY device that is driving the MINT pin. */
|
|
|
|
|
#define NIG_REG_EMAC0_STATUS_MISC_MI_INT 0x10494
|
|
|
|
|
/* [WB 48] This address space contains BMAC0 registers. The BMAC registers
|
|
|
|
|
are described in appendix A. In order to access the BMAC0 registers; the
|
|
|
|
|
base address; NIG_REGISTERS_INGRESS_BMAC0_MEM; Offset: 0x10c00; should be
|
|
|
|
|
added to each BMAC register offset */
|
|
|
|
|
#define NIG_REG_INGRESS_BMAC0_MEM 0x10c00
|
|
|
|
|
/* [WB 48] This address space contains BMAC1 registers. The BMAC registers
|
|
|
|
|
are described in appendix A. In order to access the BMAC0 registers; the
|
|
|
|
|
base address; NIG_REGISTERS_INGRESS_BMAC1_MEM; Offset: 0x11000; should be
|
|
|
|
|
added to each BMAC register offset */
|
|
|
|
|
#define NIG_REG_INGRESS_BMAC1_MEM 0x11000
|
|
|
|
|
/* [R 1] FIFO empty in EOP descriptor FIFO of LP in NIG_RX_EOP */
|
|
|
|
|
#define NIG_REG_INGRESS_EOP_LB_EMPTY 0x104e0
|
|
|
|
|
/* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Data
|
|
|
|
|
packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16] */
|
|
|
|
|
#define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4
|
2009-08-12 16:22:16 +08:00
|
|
|
/* [RW 27] 0 - must be active for Everest A0; 1- for Everest B0 when latch
|
|
|
|
|
logic for interrupts must be used. Enable per bit of interrupt of
|
|
|
|
|
~latch_status.latch_status */
|
|
|
|
|
#define NIG_REG_LATCH_BC_0 0x16210
|
|
|
|
|
/* [RW 27] Latch for each interrupt from Unicore.b[0]
|
|
|
|
|
status_emac0_misc_mi_int; b[1] status_emac0_misc_mi_complete;
|
|
|
|
|
b[2]status_emac0_misc_cfg_change; b[3]status_emac0_misc_link_status;
|
|
|
|
|
b[4]status_emac0_misc_link_change; b[5]status_emac0_misc_attn;
|
|
|
|
|
b[6]status_serdes0_mac_crs; b[7]status_serdes0_autoneg_complete;
|
|
|
|
|
b[8]status_serdes0_fiber_rxact; b[9]status_serdes0_link_status;
|
|
|
|
|
b[10]status_serdes0_mr_page_rx; b[11]status_serdes0_cl73_an_complete;
|
|
|
|
|
b[12]status_serdes0_cl73_mr_page_rx; b[13]status_serdes0_rx_sigdet;
|
|
|
|
|
b[14]status_xgxs0_remotemdioreq; b[15]status_xgxs0_link10g;
|
|
|
|
|
b[16]status_xgxs0_autoneg_complete; b[17]status_xgxs0_fiber_rxact;
|
|
|
|
|
b[21:18]status_xgxs0_link_status; b[22]status_xgxs0_mr_page_rx;
|
|
|
|
|
b[23]status_xgxs0_cl73_an_complete; b[24]status_xgxs0_cl73_mr_page_rx;
|
|
|
|
|
b[25]status_xgxs0_rx_sigdet; b[26]status_xgxs0_mac_crs */
|
|
|
|
|
#define NIG_REG_LATCH_STATUS_0 0x18000
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] led 10g for port 0 */
|
|
|
|
|
#define NIG_REG_LED_10G_P0 0x10320
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 1] led 10g for port 1 */
|
|
|
|
|
#define NIG_REG_LED_10G_P1 0x10324
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Port0: This bit is set to enable the use of the
|
|
|
|
|
~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field
|
|
|
|
|
defined below. If this bit is cleared; then the blink rate will be about
|
|
|
|
|
8Hz. */
|
|
|
|
|
#define NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 0x10318
|
|
|
|
|
/* [RW 12] Port0: Specifies the period of each blink cycle (on + off) for
|
|
|
|
|
Traffic LED in milliseconds. Must be a non-zero value. This 12-bit field
|
|
|
|
|
is reset to 0x080; giving a default blink period of approximately 8Hz. */
|
|
|
|
|
#define NIG_REG_LED_CONTROL_BLINK_RATE_P0 0x10310
|
|
|
|
|
/* [RW 1] Port0: If set along with the
|
2008-06-24 11:33:01 +08:00
|
|
|
~nig_registers_led_control_override_traffic_p0.led_control_override_traffic_p0
|
2007-11-16 02:09:02 +08:00
|
|
|
bit and ~nig_registers_led_control_traffic_p0.led_control_traffic_p0 LED
|
|
|
|
|
bit; the Traffic LED will blink with the blink rate specified in
|
|
|
|
|
~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
|
|
|
|
|
~nig_registers_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
|
|
|
|
|
fields. */
|
|
|
|
|
#define NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 0x10308
|
|
|
|
|
/* [RW 1] Port0: If set overrides hardware control of the Traffic LED. The
|
|
|
|
|
Traffic LED will then be controlled via bit ~nig_registers_
|
|
|
|
|
led_control_traffic_p0.led_control_traffic_p0 and bit
|
|
|
|
|
~nig_registers_led_control_blink_traffic_p0.led_control_blink_traffic_p0 */
|
|
|
|
|
#define NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 0x102f8
|
|
|
|
|
/* [RW 1] Port0: If set along with the led_control_override_trafic_p0 bit;
|
|
|
|
|
turns on the Traffic LED. If the led_control_blink_traffic_p0 bit is also
|
|
|
|
|
set; the LED will blink with blink rate specified in
|
|
|
|
|
~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
|
|
|
|
|
~nig_regsters_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
|
|
|
|
|
fields. */
|
|
|
|
|
#define NIG_REG_LED_CONTROL_TRAFFIC_P0 0x10300
|
|
|
|
|
/* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3;
|
|
|
|
|
9-11PHY7; 12 MAC4; 13-15 PHY10; */
|
|
|
|
|
#define NIG_REG_LED_MODE_P0 0x102f0
|
2009-02-12 16:36:43 +08:00
|
|
|
/* [RW 3] for port0 enable for llfc ppp and pause. b0 - brb1 enable; b1-
|
|
|
|
|
tsdm enable; b2- usdm enable */
|
|
|
|
|
#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_0 0x16070
|
2009-08-13 13:53:28 +08:00
|
|
|
#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 0x16074
|
2009-02-12 16:36:43 +08:00
|
|
|
/* [RW 1] SAFC enable for port0. This register may get 1 only when
|
|
|
|
|
~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same
|
|
|
|
|
port */
|
|
|
|
|
#define NIG_REG_LLFC_ENABLE_0 0x16208
|
|
|
|
|
/* [RW 16] classes are high-priority for port0 */
|
|
|
|
|
#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0 0x16058
|
|
|
|
|
/* [RW 16] classes are low-priority for port0 */
|
|
|
|
|
#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0 0x16060
|
|
|
|
|
/* [RW 1] Output enable of message to LLFC BMAC IF for port0 */
|
|
|
|
|
#define NIG_REG_LLFC_OUT_EN_0 0x160c8
|
2008-06-24 11:27:52 +08:00
|
|
|
#define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c
|
|
|
|
|
#define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154
|
2007-11-16 02:09:02 +08:00
|
|
|
#define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244
|
2008-06-24 11:27:52 +08:00
|
|
|
#define NIG_REG_LLH0_BRB1_DRV_MASK_MF 0x16048
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] send to BRB1 if no match on any of RMP rules. */
|
|
|
|
|
#define NIG_REG_LLH0_BRB1_NOT_MCP 0x1025c
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 2] Determine the classification participants. 0: no classification.1:
|
|
|
|
|
classification upon VLAN id. 2: classification upon MAC address. 3:
|
|
|
|
|
classification upon both VLAN id & MAC addr. */
|
|
|
|
|
#define NIG_REG_LLH0_CLS_TYPE 0x16080
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] cm header for llh0 */
|
|
|
|
|
#define NIG_REG_LLH0_CM_HEADER 0x1007c
|
2008-06-24 11:27:52 +08:00
|
|
|
#define NIG_REG_LLH0_DEST_IP_0_1 0x101dc
|
|
|
|
|
#define NIG_REG_LLH0_DEST_MAC_0_0 0x101c0
|
|
|
|
|
/* [RW 16] destination TCP address 1. The LLH will look for this address in
|
|
|
|
|
all incoming packets. */
|
|
|
|
|
#define NIG_REG_LLH0_DEST_TCP_0 0x10220
|
|
|
|
|
/* [RW 16] destination UDP address 1 The LLH will look for this address in
|
|
|
|
|
all incoming packets. */
|
|
|
|
|
#define NIG_REG_LLH0_DEST_UDP_0 0x10214
|
2007-11-16 02:09:02 +08:00
|
|
|
#define NIG_REG_LLH0_ERROR_MASK 0x1008c
|
|
|
|
|
/* [RW 8] event id for llh0 */
|
|
|
|
|
#define NIG_REG_LLH0_EVENT_ID 0x10084
|
2008-06-24 11:27:52 +08:00
|
|
|
#define NIG_REG_LLH0_FUNC_EN 0x160fc
|
|
|
|
|
#define NIG_REG_LLH0_FUNC_VLAN_ID 0x16100
|
|
|
|
|
/* [RW 1] Determine the IP version to look for in
|
|
|
|
|
~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4 */
|
|
|
|
|
#define NIG_REG_LLH0_IPV4_IPV6_0 0x10208
|
|
|
|
|
/* [RW 1] t bit for llh0 */
|
|
|
|
|
#define NIG_REG_LLH0_T_BIT 0x10074
|
|
|
|
|
/* [RW 12] VLAN ID 1. In case of VLAN packet the LLH will look for this ID. */
|
|
|
|
|
#define NIG_REG_LLH0_VLAN_ID_0 0x1022c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 8] init credit counter for port0 in LLH */
|
|
|
|
|
#define NIG_REG_LLH0_XCM_INIT_CREDIT 0x10554
|
|
|
|
|
#define NIG_REG_LLH0_XCM_MASK 0x10130
|
2008-08-14 06:50:00 +08:00
|
|
|
#define NIG_REG_LLH1_BRB1_DRV_MASK 0x10248
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] send to BRB1 if no match on any of RMP rules. */
|
|
|
|
|
#define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 2] Determine the classification participants. 0: no classification.1:
|
|
|
|
|
classification upon VLAN id. 2: classification upon MAC address. 3:
|
|
|
|
|
classification upon both VLAN id & MAC addr. */
|
|
|
|
|
#define NIG_REG_LLH1_CLS_TYPE 0x16084
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] cm header for llh1 */
|
|
|
|
|
#define NIG_REG_LLH1_CM_HEADER 0x10080
|
|
|
|
|
#define NIG_REG_LLH1_ERROR_MASK 0x10090
|
|
|
|
|
/* [RW 8] event id for llh1 */
|
|
|
|
|
#define NIG_REG_LLH1_EVENT_ID 0x10088
|
|
|
|
|
/* [RW 8] init credit counter for port1 in LLH */
|
|
|
|
|
#define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564
|
|
|
|
|
#define NIG_REG_LLH1_XCM_MASK 0x10134
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 1] When this bit is set; the LLH will expect all packets to be with
|
|
|
|
|
e1hov */
|
|
|
|
|
#define NIG_REG_LLH_E1HOV_MODE 0x160d8
|
|
|
|
|
/* [RW 1] When this bit is set; the LLH will classify the packet before
|
|
|
|
|
sending it to the BRB or calculating WoL on it. */
|
|
|
|
|
#define NIG_REG_LLH_MF_MODE 0x16024
|
2007-11-16 02:09:02 +08:00
|
|
|
#define NIG_REG_MASK_INTERRUPT_PORT0 0x10330
|
|
|
|
|
#define NIG_REG_MASK_INTERRUPT_PORT1 0x10334
|
|
|
|
|
/* [RW 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */
|
|
|
|
|
#define NIG_REG_NIG_EMAC0_EN 0x1003c
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 1] Output signal from NIG to EMAC1. When set enables the EMAC1 block. */
|
|
|
|
|
#define NIG_REG_NIG_EMAC1_EN 0x10040
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Output signal from NIG to TX_EMAC0. When set indicates to the
|
|
|
|
|
EMAC0 to strip the CRC from the ingress packets. */
|
|
|
|
|
#define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 32] Interrupt register #0 read */
|
|
|
|
|
#define NIG_REG_NIG_INT_STS_0 0x103b0
|
|
|
|
|
#define NIG_REG_NIG_INT_STS_1 0x103c0
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [R 32] Legacy E1 and E1H location for parity error status register. */
|
2008-06-24 11:27:52 +08:00
|
|
|
#define NIG_REG_NIG_PRTY_STS 0x103d0
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [R 32] Parity register #0 read */
|
|
|
|
|
#define NIG_REG_NIG_PRTY_STS_0 0x183bc
|
|
|
|
|
#define NIG_REG_NIG_PRTY_STS_1 0x183cc
|
|
|
|
|
/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
|
|
|
|
|
* Ethernet header. */
|
|
|
|
|
#define NIG_REG_P0_HDRS_AFTER_BASIC 0x18038
|
|
|
|
|
/* [RW 1] HW PFC enable bit. Set this bit to enable the PFC functionality in
|
|
|
|
|
* the NIG. Other flow control modes such as PAUSE and SAFC/LLFC should be
|
|
|
|
|
* disabled when this bit is set. */
|
|
|
|
|
#define NIG_REG_P0_HWPFC_ENABLE 0x18078
|
|
|
|
|
#define NIG_REG_P0_LLH_FUNC_MEM2 0x18480
|
|
|
|
|
#define NIG_REG_P0_LLH_FUNC_MEM2_ENABLE 0x18440
|
|
|
|
|
/* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for
|
|
|
|
|
* future expansion) each priorty is to be mapped to. Bits 3:0 specify the
|
|
|
|
|
* COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit
|
|
|
|
|
* priority field is extracted from the outer-most VLAN in receive packet.
|
|
|
|
|
* Only COS 0 and COS 1 are supported in E2. */
|
|
|
|
|
#define NIG_REG_P0_PKT_PRIORITY_TO_COS 0x18054
|
|
|
|
|
/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A
|
|
|
|
|
* priority is mapped to COS 0 when the corresponding mask bit is 1. More
|
|
|
|
|
* than one bit may be set; allowing multiple priorities to be mapped to one
|
|
|
|
|
* COS. */
|
|
|
|
|
#define NIG_REG_P0_RX_COS0_PRIORITY_MASK 0x18058
|
|
|
|
|
/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A
|
|
|
|
|
* priority is mapped to COS 1 when the corresponding mask bit is 1. More
|
|
|
|
|
* than one bit may be set; allowing multiple priorities to be mapped to one
|
|
|
|
|
* COS. */
|
|
|
|
|
#define NIG_REG_P0_RX_COS1_PRIORITY_MASK 0x1805c
|
|
|
|
|
/* [RW 15] Specify which of the credit registers the client is to be mapped
|
|
|
|
|
* to. Bits[2:0] are for client 0; bits [14:12] are for client 4. For
|
|
|
|
|
* clients that are not subject to WFQ credit blocking - their
|
|
|
|
|
* specifications here are not used. */
|
|
|
|
|
#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP 0x180f0
|
|
|
|
|
/* [RW 5] Specify whether the client competes directly in the strict
|
|
|
|
|
* priority arbiter. The bits are mapped according to client ID (client IDs
|
|
|
|
|
* are defined in tx_arb_priority_client). Default value is set to enable
|
|
|
|
|
* strict priorities for clients 0-2 -- management and debug traffic. */
|
|
|
|
|
#define NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT 0x180e8
|
|
|
|
|
/* [RW 5] Specify whether the client is subject to WFQ credit blocking. The
|
|
|
|
|
* bits are mapped according to client ID (client IDs are defined in
|
|
|
|
|
* tx_arb_priority_client). Default value is 0 for not using WFQ credit
|
|
|
|
|
* blocking. */
|
|
|
|
|
#define NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ 0x180ec
|
|
|
|
|
/* [RW 32] Specify the upper bound that credit register 0 is allowed to
|
|
|
|
|
* reach. */
|
|
|
|
|
#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0 0x1810c
|
|
|
|
|
#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1 0x18110
|
|
|
|
|
/* [RW 32] Specify the weight (in bytes) to be added to credit register 0
|
|
|
|
|
* when it is time to increment. */
|
|
|
|
|
#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0 0x180f8
|
|
|
|
|
#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1 0x180fc
|
|
|
|
|
/* [RW 12] Specify the number of strict priority arbitration slots between
|
|
|
|
|
* two round-robin arbitration slots to avoid starvation. A value of 0 means
|
|
|
|
|
* no strict priority cycles - the strict priority with anti-starvation
|
|
|
|
|
* arbiter becomes a round-robin arbiter. */
|
|
|
|
|
#define NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS 0x180f4
|
|
|
|
|
/* [RW 15] Specify the client number to be assigned to each priority of the
|
|
|
|
|
* strict priority arbiter. Priority 0 is the highest priority. Bits [2:0]
|
|
|
|
|
* are for priority 0 client; bits [14:12] are for priority 4 client. The
|
|
|
|
|
* clients are assigned the following IDs: 0-management; 1-debug traffic
|
|
|
|
|
* from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1
|
|
|
|
|
* traffic. The reset value[14:0] is set to 0x4688 (15'b100_011_010_001_000)
|
|
|
|
|
* for management at priority 0; debug traffic at priorities 1 and 2; COS0
|
|
|
|
|
* traffic at priority 3; and COS1 traffic at priority 4. */
|
|
|
|
|
#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT 0x180e4
|
|
|
|
|
#define NIG_REG_P1_LLH_FUNC_MEM2 0x184c0
|
|
|
|
|
#define NIG_REG_P1_LLH_FUNC_MEM2_ENABLE 0x18460
|
|
|
|
|
/* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for
|
|
|
|
|
* future expansion) each priorty is to be mapped to. Bits 3:0 specify the
|
|
|
|
|
* COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit
|
|
|
|
|
* priority field is extracted from the outer-most VLAN in receive packet.
|
|
|
|
|
* Only COS 0 and COS 1 are supported in E2. */
|
|
|
|
|
#define NIG_REG_P1_PKT_PRIORITY_TO_COS 0x181a8
|
|
|
|
|
/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A
|
|
|
|
|
* priority is mapped to COS 0 when the corresponding mask bit is 1. More
|
|
|
|
|
* than one bit may be set; allowing multiple priorities to be mapped to one
|
|
|
|
|
* COS. */
|
|
|
|
|
#define NIG_REG_P1_RX_COS0_PRIORITY_MASK 0x181ac
|
|
|
|
|
/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A
|
|
|
|
|
* priority is mapped to COS 1 when the corresponding mask bit is 1. More
|
|
|
|
|
* than one bit may be set; allowing multiple priorities to be mapped to one
|
|
|
|
|
* COS. */
|
|
|
|
|
#define NIG_REG_P1_RX_COS1_PRIORITY_MASK 0x181b0
|
2009-02-12 16:36:43 +08:00
|
|
|
/* [RW 1] Pause enable for port0. This register may get 1 only when
|
|
|
|
|
~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same
|
|
|
|
|
port */
|
|
|
|
|
#define NIG_REG_PAUSE_ENABLE_0 0x160c0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Input enable for RX PBF LP IF */
|
|
|
|
|
#define NIG_REG_PBF_LB_IN_EN 0x100b4
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [RW 1] Value of this register will be transmitted to port swap when
|
|
|
|
|
~nig_registers_strap_override.strap_override =1 */
|
|
|
|
|
#define NIG_REG_PORT_SWAP 0x10394
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] output enable for RX parser descriptor IF */
|
|
|
|
|
#define NIG_REG_PRS_EOP_OUT_EN 0x10104
|
|
|
|
|
/* [RW 1] Input enable for RX parser request IF */
|
|
|
|
|
#define NIG_REG_PRS_REQ_IN_EN 0x100b8
|
2009-02-12 16:37:07 +08:00
|
|
|
/* [RW 5] control to serdes - CL45 DEVAD */
|
|
|
|
|
#define NIG_REG_SERDES0_CTRL_MD_DEVAD 0x10370
|
|
|
|
|
/* [RW 1] control to serdes; 0 - clause 45; 1 - clause 22 */
|
|
|
|
|
#define NIG_REG_SERDES0_CTRL_MD_ST 0x1036c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */
|
|
|
|
|
#define NIG_REG_SERDES0_CTRL_PHY_ADDR 0x10374
|
|
|
|
|
/* [R 1] status from serdes0 that inputs to interrupt logic of link status */
|
|
|
|
|
#define NIG_REG_SERDES0_STATUS_LINK_STATUS 0x10578
|
|
|
|
|
/* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
|
|
|
|
|
for port0 */
|
|
|
|
|
#define NIG_REG_STAT0_BRB_DISCARD 0x105f0
|
2008-08-14 06:49:05 +08:00
|
|
|
/* [R 32] Rx statistics : In user packets truncated due to BRB backpressure
|
|
|
|
|
for port0 */
|
|
|
|
|
#define NIG_REG_STAT0_BRB_TRUNCATE 0x105f8
|
2008-06-24 11:33:01 +08:00
|
|
|
/* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
|
|
|
|
|
between 1024 and 1522 bytes for port0 */
|
|
|
|
|
#define NIG_REG_STAT0_EGRESS_MAC_PKT0 0x10750
|
|
|
|
|
/* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
|
|
|
|
|
between 1523 bytes and above for port0 */
|
|
|
|
|
#define NIG_REG_STAT0_EGRESS_MAC_PKT1 0x10760
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
|
|
|
|
|
for port1 */
|
|
|
|
|
#define NIG_REG_STAT1_BRB_DISCARD 0x10628
|
2008-06-24 11:33:01 +08:00
|
|
|
/* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
|
|
|
|
|
between 1024 and 1522 bytes for port1 */
|
|
|
|
|
#define NIG_REG_STAT1_EGRESS_MAC_PKT0 0x107a0
|
|
|
|
|
/* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
|
|
|
|
|
between 1523 bytes and above for port1 */
|
|
|
|
|
#define NIG_REG_STAT1_EGRESS_MAC_PKT1 0x107b0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [WB_R 64] Rx statistics : User octets received for LP */
|
|
|
|
|
#define NIG_REG_STAT2_BRB_OCTET 0x107e0
|
|
|
|
|
#define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328
|
|
|
|
|
#define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [RW 1] port swap mux selection. If this register equal to 0 then port
|
|
|
|
|
swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then
|
|
|
|
|
ort swap is equal to ~nig_registers_port_swap.port_swap */
|
|
|
|
|
#define NIG_REG_STRAP_OVERRIDE 0x10398
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] output enable for RX_XCM0 IF */
|
|
|
|
|
#define NIG_REG_XCM0_OUT_EN 0x100f0
|
|
|
|
|
/* [RW 1] output enable for RX_XCM1 IF */
|
|
|
|
|
#define NIG_REG_XCM1_OUT_EN 0x100f4
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 1] control to xgxs - remote PHY in-band MDIO */
|
|
|
|
|
#define NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST 0x10348
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 5] control to xgxs - CL45 DEVAD */
|
|
|
|
|
#define NIG_REG_XGXS0_CTRL_MD_DEVAD 0x1033c
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 1] control to xgxs; 0 - clause 45; 1 - clause 22 */
|
|
|
|
|
#define NIG_REG_XGXS0_CTRL_MD_ST 0x10338
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */
|
|
|
|
|
#define NIG_REG_XGXS0_CTRL_PHY_ADDR 0x10340
|
|
|
|
|
/* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */
|
|
|
|
|
#define NIG_REG_XGXS0_STATUS_LINK10G 0x10680
|
|
|
|
|
/* [R 4] status from xgxs0 that inputs to interrupt logic of link status */
|
|
|
|
|
#define NIG_REG_XGXS0_STATUS_LINK_STATUS 0x10684
|
|
|
|
|
/* [RW 2] selection for XGXS lane of port 0 in NIG_MUX block */
|
|
|
|
|
#define NIG_REG_XGXS_LANE_SEL_P0 0x102e8
|
|
|
|
|
/* [RW 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */
|
|
|
|
|
#define NIG_REG_XGXS_SERDES0_MODE_SEL 0x102e0
|
2009-08-12 16:22:16 +08:00
|
|
|
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT (0x1<<0)
|
2007-11-16 02:09:02 +08:00
|
|
|
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1<<9)
|
|
|
|
|
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1<<15)
|
|
|
|
|
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf<<18)
|
|
|
|
|
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18
|
|
|
|
|
/* [RW 1] Disable processing further tasks from port 0 (after ending the
|
|
|
|
|
current task in process). */
|
|
|
|
|
#define PBF_REG_DISABLE_NEW_TASK_PROC_P0 0x14005c
|
|
|
|
|
/* [RW 1] Disable processing further tasks from port 1 (after ending the
|
|
|
|
|
current task in process). */
|
|
|
|
|
#define PBF_REG_DISABLE_NEW_TASK_PROC_P1 0x140060
|
|
|
|
|
/* [RW 1] Disable processing further tasks from port 4 (after ending the
|
|
|
|
|
current task in process). */
|
|
|
|
|
#define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c
|
2010-10-06 11:28:26 +08:00
|
|
|
#define PBF_REG_DISABLE_PF 0x1402e8
|
|
|
|
|
/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
|
|
|
|
|
* Ethernet header. */
|
|
|
|
|
#define PBF_REG_HDRS_AFTER_BASIC 0x15c0a8
|
2007-11-16 02:09:02 +08:00
|
|
|
#define PBF_REG_IF_ENABLE_REG 0x140044
|
|
|
|
|
/* [RW 1] Init bit. When set the initial credits are copied to the credit
|
|
|
|
|
registers (except the port credits). Should be set and then reset after
|
|
|
|
|
the configuration of the block has ended. */
|
|
|
|
|
#define PBF_REG_INIT 0x140000
|
|
|
|
|
/* [RW 1] Init bit for port 0. When set the initial credit of port 0 is
|
|
|
|
|
copied to the credit register. Should be set and then reset after the
|
|
|
|
|
configuration of the port has ended. */
|
|
|
|
|
#define PBF_REG_INIT_P0 0x140004
|
|
|
|
|
/* [RW 1] Init bit for port 1. When set the initial credit of port 1 is
|
|
|
|
|
copied to the credit register. Should be set and then reset after the
|
|
|
|
|
configuration of the port has ended. */
|
|
|
|
|
#define PBF_REG_INIT_P1 0x140008
|
|
|
|
|
/* [RW 1] Init bit for port 4. When set the initial credit of port 4 is
|
|
|
|
|
copied to the credit register. Should be set and then reset after the
|
|
|
|
|
configuration of the port has ended. */
|
|
|
|
|
#define PBF_REG_INIT_P4 0x14000c
|
|
|
|
|
/* [RW 1] Enable for mac interface 0. */
|
|
|
|
|
#define PBF_REG_MAC_IF0_ENABLE 0x140030
|
|
|
|
|
/* [RW 1] Enable for mac interface 1. */
|
|
|
|
|
#define PBF_REG_MAC_IF1_ENABLE 0x140034
|
|
|
|
|
/* [RW 1] Enable for the loopback interface. */
|
|
|
|
|
#define PBF_REG_MAC_LB_ENABLE 0x140040
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [RW 6] Bit-map indicating which headers must appear in the packet */
|
|
|
|
|
#define PBF_REG_MUST_HAVE_HDRS 0x15c0c4
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when pause
|
|
|
|
|
not suppoterd. */
|
|
|
|
|
#define PBF_REG_P0_ARB_THRSH 0x1400e4
|
|
|
|
|
/* [R 11] Current credit for port 0 in the tx port buffers in 16 byte lines. */
|
|
|
|
|
#define PBF_REG_P0_CREDIT 0x140200
|
|
|
|
|
/* [RW 11] Initial credit for port 0 in the tx port buffers in 16 byte
|
|
|
|
|
lines. */
|
|
|
|
|
#define PBF_REG_P0_INIT_CRD 0x1400d0
|
|
|
|
|
/* [RW 1] Indication that pause is enabled for port 0. */
|
|
|
|
|
#define PBF_REG_P0_PAUSE_ENABLE 0x140014
|
|
|
|
|
/* [R 8] Number of tasks in port 0 task queue. */
|
|
|
|
|
#define PBF_REG_P0_TASK_CNT 0x140204
|
|
|
|
|
/* [R 11] Current credit for port 1 in the tx port buffers in 16 byte lines. */
|
|
|
|
|
#define PBF_REG_P1_CREDIT 0x140208
|
|
|
|
|
/* [RW 11] Initial credit for port 1 in the tx port buffers in 16 byte
|
|
|
|
|
lines. */
|
|
|
|
|
#define PBF_REG_P1_INIT_CRD 0x1400d4
|
|
|
|
|
/* [R 8] Number of tasks in port 1 task queue. */
|
|
|
|
|
#define PBF_REG_P1_TASK_CNT 0x14020c
|
|
|
|
|
/* [R 11] Current credit for port 4 in the tx port buffers in 16 byte lines. */
|
|
|
|
|
#define PBF_REG_P4_CREDIT 0x140210
|
|
|
|
|
/* [RW 11] Initial credit for port 4 in the tx port buffers in 16 byte
|
|
|
|
|
lines. */
|
|
|
|
|
#define PBF_REG_P4_INIT_CRD 0x1400e0
|
|
|
|
|
/* [R 8] Number of tasks in port 4 task queue. */
|
|
|
|
|
#define PBF_REG_P4_TASK_CNT 0x140214
|
|
|
|
|
/* [RW 5] Interrupt mask register #0 read/write */
|
|
|
|
|
#define PBF_REG_PBF_INT_MASK 0x1401d4
|
|
|
|
|
/* [R 5] Interrupt register #0 read */
|
|
|
|
|
#define PBF_REG_PBF_INT_STS 0x1401c8
|
|
|
|
|
#define PB_REG_CONTROL 0
|
|
|
|
|
/* [RW 2] Interrupt mask register #0 read/write */
|
|
|
|
|
#define PB_REG_PB_INT_MASK 0x28
|
|
|
|
|
/* [R 2] Interrupt register #0 read */
|
|
|
|
|
#define PB_REG_PB_INT_STS 0x1c
|
|
|
|
|
/* [RW 4] Parity mask register #0 read/write */
|
|
|
|
|
#define PB_REG_PB_PRTY_MASK 0x38
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 4] Parity register #0 read */
|
|
|
|
|
#define PB_REG_PB_PRTY_STS 0x2c
|
2010-10-06 11:28:26 +08:00
|
|
|
#define PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
|
|
|
|
|
#define PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW (0x1<<8)
|
|
|
|
|
#define PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR (0x1<<1)
|
|
|
|
|
#define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN (0x1<<6)
|
|
|
|
|
#define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN (0x1<<7)
|
|
|
|
|
#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN (0x1<<4)
|
|
|
|
|
#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN (0x1<<3)
|
|
|
|
|
#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN (0x1<<5)
|
|
|
|
|
#define PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN (0x1<<2)
|
|
|
|
|
/* [R 8] Config space A attention dirty bits. Each bit indicates that the
|
|
|
|
|
* corresponding PF generates config space A attention. Set by PXP. Reset by
|
|
|
|
|
* MCP writing 1 to icfg_space_a_request_clr. Note: register contains bits
|
|
|
|
|
* from both paths. */
|
|
|
|
|
#define PGLUE_B_REG_CFG_SPACE_A_REQUEST 0x9010
|
|
|
|
|
/* [R 8] Config space B attention dirty bits. Each bit indicates that the
|
|
|
|
|
* corresponding PF generates config space B attention. Set by PXP. Reset by
|
|
|
|
|
* MCP writing 1 to icfg_space_b_request_clr. Note: register contains bits
|
|
|
|
|
* from both paths. */
|
|
|
|
|
#define PGLUE_B_REG_CFG_SPACE_B_REQUEST 0x9014
|
|
|
|
|
/* [RW 1] Type A PF enable inbound interrupt table for CSDM. 0 - disable; 1
|
|
|
|
|
* - enable. */
|
|
|
|
|
#define PGLUE_B_REG_CSDM_INB_INT_A_PF_ENABLE 0x9194
|
|
|
|
|
/* [RW 18] Type B VF inbound interrupt table for CSDM: bits[17:9]-mask;
|
|
|
|
|
* its[8:0]-address. Bits [1:0] must be zero (DW resolution address). */
|
|
|
|
|
#define PGLUE_B_REG_CSDM_INB_INT_B_VF 0x916c
|
|
|
|
|
/* [RW 1] Type B VF enable inbound interrupt table for CSDM. 0 - disable; 1
|
|
|
|
|
* - enable. */
|
|
|
|
|
#define PGLUE_B_REG_CSDM_INB_INT_B_VF_ENABLE 0x919c
|
|
|
|
|
/* [RW 16] Start offset of CSDM zone A (queue zone) in the internal RAM */
|
|
|
|
|
#define PGLUE_B_REG_CSDM_START_OFFSET_A 0x9100
|
|
|
|
|
/* [RW 16] Start offset of CSDM zone B (legacy zone) in the internal RAM */
|
|
|
|
|
#define PGLUE_B_REG_CSDM_START_OFFSET_B 0x9108
|
|
|
|
|
/* [RW 5] VF Shift of CSDM zone B (legacy zone) in the internal RAM */
|
|
|
|
|
#define PGLUE_B_REG_CSDM_VF_SHIFT_B 0x9110
|
|
|
|
|
/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */
|
|
|
|
|
#define PGLUE_B_REG_CSDM_ZONE_A_SIZE_PF 0x91ac
|
|
|
|
|
/* [R 8] FLR request attention dirty bits for PFs 0 to 7. Each bit indicates
|
|
|
|
|
* that the FLR register of the corresponding PF was set. Set by PXP. Reset
|
|
|
|
|
* by MCP writing 1 to flr_request_pf_7_0_clr. Note: register contains bits
|
|
|
|
|
* from both paths. */
|
|
|
|
|
#define PGLUE_B_REG_FLR_REQUEST_PF_7_0 0x9028
|
|
|
|
|
/* [W 8] FLR request attention dirty bits clear for PFs 0 to 7. MCP writes 1
|
|
|
|
|
* to a bit in this register in order to clear the corresponding bit in
|
|
|
|
|
* flr_request_pf_7_0 register. Note: register contains bits from both
|
|
|
|
|
* paths. */
|
|
|
|
|
#define PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR 0x9418
|
|
|
|
|
/* [R 32] FLR request attention dirty bits for VFs 96 to 127. Each bit
|
|
|
|
|
* indicates that the FLR register of the corresponding VF was set. Set by
|
|
|
|
|
* PXP. Reset by MCP writing 1 to flr_request_vf_127_96_clr. */
|
|
|
|
|
#define PGLUE_B_REG_FLR_REQUEST_VF_127_96 0x9024
|
|
|
|
|
/* [R 32] FLR request attention dirty bits for VFs 0 to 31. Each bit
|
|
|
|
|
* indicates that the FLR register of the corresponding VF was set. Set by
|
|
|
|
|
* PXP. Reset by MCP writing 1 to flr_request_vf_31_0_clr. */
|
|
|
|
|
#define PGLUE_B_REG_FLR_REQUEST_VF_31_0 0x9018
|
|
|
|
|
/* [R 32] FLR request attention dirty bits for VFs 32 to 63. Each bit
|
|
|
|
|
* indicates that the FLR register of the corresponding VF was set. Set by
|
|
|
|
|
* PXP. Reset by MCP writing 1 to flr_request_vf_63_32_clr. */
|
|
|
|
|
#define PGLUE_B_REG_FLR_REQUEST_VF_63_32 0x901c
|
|
|
|
|
/* [R 32] FLR request attention dirty bits for VFs 64 to 95. Each bit
|
|
|
|
|
* indicates that the FLR register of the corresponding VF was set. Set by
|
|
|
|
|
* PXP. Reset by MCP writing 1 to flr_request_vf_95_64_clr. */
|
|
|
|
|
#define PGLUE_B_REG_FLR_REQUEST_VF_95_64 0x9020
|
|
|
|
|
/* [R 8] Each bit indicates an incorrect behavior in user RX interface. Bit
|
|
|
|
|
* 0 - Target memory read arrived with a correctable error. Bit 1 - Target
|
|
|
|
|
* memory read arrived with an uncorrectable error. Bit 2 - Configuration RW
|
|
|
|
|
* arrived with a correctable error. Bit 3 - Configuration RW arrived with
|
|
|
|
|
* an uncorrectable error. Bit 4 - Completion with Configuration Request
|
|
|
|
|
* Retry Status. Bit 5 - Expansion ROM access received with a write request.
|
|
|
|
|
* Bit 6 - Completion with pcie_rx_err of 0000; CMPL_STATUS of non-zero; and
|
|
|
|
|
* pcie_rx_last not asserted. Bit 7 - Completion with pcie_rx_err of 1010;
|
|
|
|
|
* and pcie_rx_last not asserted. */
|
|
|
|
|
#define PGLUE_B_REG_INCORRECT_RCV_DETAILS 0x9068
|
|
|
|
|
#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER 0x942c
|
|
|
|
|
#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ 0x9430
|
|
|
|
|
#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_WRITE 0x9434
|
|
|
|
|
#define PGLUE_B_REG_INTERNAL_VFID_ENABLE 0x9438
|
|
|
|
|
/* [R 9] Interrupt register #0 read */
|
|
|
|
|
#define PGLUE_B_REG_PGLUE_B_INT_STS 0x9298
|
|
|
|
|
/* [RC 9] Interrupt register #0 read clear */
|
|
|
|
|
#define PGLUE_B_REG_PGLUE_B_INT_STS_CLR 0x929c
|
|
|
|
|
/* [R 2] Parity register #0 read */
|
|
|
|
|
#define PGLUE_B_REG_PGLUE_B_PRTY_STS 0x92a8
|
|
|
|
|
/* [R 13] Details of first request received with error. [2:0] - PFID. [3] -
|
|
|
|
|
* VF_VALID. [9:4] - VFID. [11:10] - Error Code - 0 - Indicates Completion
|
|
|
|
|
* Timeout of a User Tx non-posted request. 1 - unsupported request. 2 -
|
|
|
|
|
* completer abort. 3 - Illegal value for this field. [12] valid - indicates
|
|
|
|
|
* if there was a completion error since the last time this register was
|
|
|
|
|
* cleared. */
|
|
|
|
|
#define PGLUE_B_REG_RX_ERR_DETAILS 0x9080
|
|
|
|
|
/* [R 18] Details of first ATS Translation Completion request received with
|
|
|
|
|
* error. [2:0] - PFID. [3] - VF_VALID. [9:4] - VFID. [11:10] - Error Code -
|
|
|
|
|
* 0 - Indicates Completion Timeout of a User Tx non-posted request. 1 -
|
|
|
|
|
* unsupported request. 2 - completer abort. 3 - Illegal value for this
|
|
|
|
|
* field. [16:12] - ATC OTB EntryID. [17] valid - indicates if there was a
|
|
|
|
|
* completion error since the last time this register was cleared. */
|
|
|
|
|
#define PGLUE_B_REG_RX_TCPL_ERR_DETAILS 0x9084
|
|
|
|
|
/* [W 8] Debug only - Shadow BME bits clear for PFs 0 to 7. MCP writes 1 to
|
|
|
|
|
* a bit in this register in order to clear the corresponding bit in
|
|
|
|
|
* shadow_bme_pf_7_0 register. MCP should never use this unless a
|
|
|
|
|
* work-around is needed. Note: register contains bits from both paths. */
|
|
|
|
|
#define PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR 0x9458
|
|
|
|
|
/* [R 8] SR IOV disabled attention dirty bits. Each bit indicates that the
|
|
|
|
|
* VF enable register of the corresponding PF is written to 0 and was
|
|
|
|
|
* previously 1. Set by PXP. Reset by MCP writing 1 to
|
|
|
|
|
* sr_iov_disabled_request_clr. Note: register contains bits from both
|
|
|
|
|
* paths. */
|
|
|
|
|
#define PGLUE_B_REG_SR_IOV_DISABLED_REQUEST 0x9030
|
|
|
|
|
/* [R 32] Indicates the status of tags 32-63. 0 - tags is used - read
|
|
|
|
|
* completion did not return yet. 1 - tag is unused. Same functionality as
|
|
|
|
|
* pxp2_registers_pgl_exp_rom_data2 for tags 0-31. */
|
|
|
|
|
#define PGLUE_B_REG_TAGS_63_32 0x9244
|
|
|
|
|
/* [RW 1] Type A PF enable inbound interrupt table for TSDM. 0 - disable; 1
|
|
|
|
|
* - enable. */
|
|
|
|
|
#define PGLUE_B_REG_TSDM_INB_INT_A_PF_ENABLE 0x9170
|
|
|
|
|
/* [RW 16] Start offset of TSDM zone A (queue zone) in the internal RAM */
|
|
|
|
|
#define PGLUE_B_REG_TSDM_START_OFFSET_A 0x90c4
|
|
|
|
|
/* [RW 16] Start offset of TSDM zone B (legacy zone) in the internal RAM */
|
|
|
|
|
#define PGLUE_B_REG_TSDM_START_OFFSET_B 0x90cc
|
|
|
|
|
/* [RW 5] VF Shift of TSDM zone B (legacy zone) in the internal RAM */
|
|
|
|
|
#define PGLUE_B_REG_TSDM_VF_SHIFT_B 0x90d4
|
|
|
|
|
/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */
|
|
|
|
|
#define PGLUE_B_REG_TSDM_ZONE_A_SIZE_PF 0x91a0
|
|
|
|
|
/* [R 32] Address [31:0] of first read request not submitted due to error */
|
|
|
|
|
#define PGLUE_B_REG_TX_ERR_RD_ADD_31_0 0x9098
|
|
|
|
|
/* [R 32] Address [63:32] of first read request not submitted due to error */
|
|
|
|
|
#define PGLUE_B_REG_TX_ERR_RD_ADD_63_32 0x909c
|
|
|
|
|
/* [R 31] Details of first read request not submitted due to error. [4:0]
|
|
|
|
|
* VQID. [5] TREQ. 1 - Indicates the request is a Translation Request.
|
|
|
|
|
* [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25] -
|
|
|
|
|
* VFID. */
|
|
|
|
|
#define PGLUE_B_REG_TX_ERR_RD_DETAILS 0x90a0
|
|
|
|
|
/* [R 26] Details of first read request not submitted due to error. [15:0]
|
|
|
|
|
* Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type -
|
|
|
|
|
* [21] - Indicates was_error was set; [22] - Indicates BME was cleared;
|
|
|
|
|
* [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent
|
|
|
|
|
* PF FLR_request or IOV_disable_request dirty bit is set. [25] valid -
|
|
|
|
|
* indicates if there was a request not submitted due to error since the
|
|
|
|
|
* last time this register was cleared. */
|
|
|
|
|
#define PGLUE_B_REG_TX_ERR_RD_DETAILS2 0x90a4
|
|
|
|
|
/* [R 32] Address [31:0] of first write request not submitted due to error */
|
|
|
|
|
#define PGLUE_B_REG_TX_ERR_WR_ADD_31_0 0x9088
|
|
|
|
|
/* [R 32] Address [63:32] of first write request not submitted due to error */
|
|
|
|
|
#define PGLUE_B_REG_TX_ERR_WR_ADD_63_32 0x908c
|
|
|
|
|
/* [R 31] Details of first write request not submitted due to error. [4:0]
|
|
|
|
|
* VQID. [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25]
|
|
|
|
|
* - VFID. */
|
|
|
|
|
#define PGLUE_B_REG_TX_ERR_WR_DETAILS 0x9090
|
|
|
|
|
/* [R 26] Details of first write request not submitted due to error. [15:0]
|
|
|
|
|
* Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type -
|
|
|
|
|
* [21] - Indicates was_error was set; [22] - Indicates BME was cleared;
|
|
|
|
|
* [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent
|
|
|
|
|
* PF FLR_request or IOV_disable_request dirty bit is set. [25] valid -
|
|
|
|
|
* indicates if there was a request not submitted due to error since the
|
|
|
|
|
* last time this register was cleared. */
|
|
|
|
|
#define PGLUE_B_REG_TX_ERR_WR_DETAILS2 0x9094
|
|
|
|
|
/* [RW 10] Type A PF/VF inbound interrupt table for USDM: bits[9:5]-mask;
|
|
|
|
|
* its[4:0]-address relative to start_offset_a. Bits [1:0] can have any
|
|
|
|
|
* value (Byte resolution address). */
|
|
|
|
|
#define PGLUE_B_REG_USDM_INB_INT_A_0 0x9128
|
|
|
|
|
#define PGLUE_B_REG_USDM_INB_INT_A_1 0x912c
|
|
|
|
|
#define PGLUE_B_REG_USDM_INB_INT_A_2 0x9130
|
|
|
|
|
#define PGLUE_B_REG_USDM_INB_INT_A_3 0x9134
|
|
|
|
|
#define PGLUE_B_REG_USDM_INB_INT_A_4 0x9138
|
|
|
|
|
#define PGLUE_B_REG_USDM_INB_INT_A_5 0x913c
|
|
|
|
|
#define PGLUE_B_REG_USDM_INB_INT_A_6 0x9140
|
|
|
|
|
/* [RW 1] Type A PF enable inbound interrupt table for USDM. 0 - disable; 1
|
|
|
|
|
* - enable. */
|
|
|
|
|
#define PGLUE_B_REG_USDM_INB_INT_A_PF_ENABLE 0x917c
|
|
|
|
|
/* [RW 1] Type A VF enable inbound interrupt table for USDM. 0 - disable; 1
|
|
|
|
|
* - enable. */
|
|
|
|
|
#define PGLUE_B_REG_USDM_INB_INT_A_VF_ENABLE 0x9180
|
|
|
|
|
/* [RW 1] Type B VF enable inbound interrupt table for USDM. 0 - disable; 1
|
|
|
|
|
* - enable. */
|
|
|
|
|
#define PGLUE_B_REG_USDM_INB_INT_B_VF_ENABLE 0x9184
|
|
|
|
|
/* [RW 16] Start offset of USDM zone A (queue zone) in the internal RAM */
|
|
|
|
|
#define PGLUE_B_REG_USDM_START_OFFSET_A 0x90d8
|
|
|
|
|
/* [RW 16] Start offset of USDM zone B (legacy zone) in the internal RAM */
|
|
|
|
|
#define PGLUE_B_REG_USDM_START_OFFSET_B 0x90e0
|
|
|
|
|
/* [RW 5] VF Shift of USDM zone B (legacy zone) in the internal RAM */
|
|
|
|
|
#define PGLUE_B_REG_USDM_VF_SHIFT_B 0x90e8
|
|
|
|
|
/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */
|
|
|
|
|
#define PGLUE_B_REG_USDM_ZONE_A_SIZE_PF 0x91a4
|
|
|
|
|
/* [R 26] Details of first target VF request accessing VF GRC space that
|
|
|
|
|
* failed permission check. [14:0] Address. [15] w_nr: 0 - Read; 1 - Write.
|
|
|
|
|
* [21:16] VFID. [24:22] - PFID. [25] valid - indicates if there was a
|
|
|
|
|
* request accessing VF GRC space that failed permission check since the
|
|
|
|
|
* last time this register was cleared. Permission checks are: function
|
|
|
|
|
* permission; R/W permission; address range permission. */
|
|
|
|
|
#define PGLUE_B_REG_VF_GRC_SPACE_VIOLATION_DETAILS 0x9234
|
|
|
|
|
/* [R 31] Details of first target VF request with length violation (too many
|
|
|
|
|
* DWs) accessing BAR0. [12:0] Address in DWs (bits [14:2] of byte address).
|
|
|
|
|
* [14:13] BAR. [20:15] VFID. [23:21] - PFID. [29:24] - Length in DWs. [30]
|
|
|
|
|
* valid - indicates if there was a request with length violation since the
|
|
|
|
|
* last time this register was cleared. Length violations: length of more
|
|
|
|
|
* than 2DWs; length of 2DWs and address not QW aligned; window is GRC and
|
|
|
|
|
* length is more than 1 DW. */
|
|
|
|
|
#define PGLUE_B_REG_VF_LENGTH_VIOLATION_DETAILS 0x9230
|
|
|
|
|
/* [R 8] Was_error indication dirty bits for PFs 0 to 7. Each bit indicates
|
|
|
|
|
* that there was a completion with uncorrectable error for the
|
|
|
|
|
* corresponding PF. Set by PXP. Reset by MCP writing 1 to
|
|
|
|
|
* was_error_pf_7_0_clr. */
|
|
|
|
|
#define PGLUE_B_REG_WAS_ERROR_PF_7_0 0x907c
|
|
|
|
|
/* [W 8] Was_error indication dirty bits clear for PFs 0 to 7. MCP writes 1
|
|
|
|
|
* to a bit in this register in order to clear the corresponding bit in
|
|
|
|
|
* flr_request_pf_7_0 register. */
|
|
|
|
|
#define PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR 0x9470
|
|
|
|
|
/* [R 32] Was_error indication dirty bits for VFs 96 to 127. Each bit
|
|
|
|
|
* indicates that there was a completion with uncorrectable error for the
|
|
|
|
|
* corresponding VF. Set by PXP. Reset by MCP writing 1 to
|
|
|
|
|
* was_error_vf_127_96_clr. */
|
|
|
|
|
#define PGLUE_B_REG_WAS_ERROR_VF_127_96 0x9078
|
|
|
|
|
/* [W 32] Was_error indication dirty bits clear for VFs 96 to 127. MCP
|
|
|
|
|
* writes 1 to a bit in this register in order to clear the corresponding
|
|
|
|
|
* bit in was_error_vf_127_96 register. */
|
|
|
|
|
#define PGLUE_B_REG_WAS_ERROR_VF_127_96_CLR 0x9474
|
|
|
|
|
/* [R 32] Was_error indication dirty bits for VFs 0 to 31. Each bit
|
|
|
|
|
* indicates that there was a completion with uncorrectable error for the
|
|
|
|
|
* corresponding VF. Set by PXP. Reset by MCP writing 1 to
|
|
|
|
|
* was_error_vf_31_0_clr. */
|
|
|
|
|
#define PGLUE_B_REG_WAS_ERROR_VF_31_0 0x906c
|
|
|
|
|
/* [W 32] Was_error indication dirty bits clear for VFs 0 to 31. MCP writes
|
|
|
|
|
* 1 to a bit in this register in order to clear the corresponding bit in
|
|
|
|
|
* was_error_vf_31_0 register. */
|
|
|
|
|
#define PGLUE_B_REG_WAS_ERROR_VF_31_0_CLR 0x9478
|
|
|
|
|
/* [R 32] Was_error indication dirty bits for VFs 32 to 63. Each bit
|
|
|
|
|
* indicates that there was a completion with uncorrectable error for the
|
|
|
|
|
* corresponding VF. Set by PXP. Reset by MCP writing 1 to
|
|
|
|
|
* was_error_vf_63_32_clr. */
|
|
|
|
|
#define PGLUE_B_REG_WAS_ERROR_VF_63_32 0x9070
|
|
|
|
|
/* [W 32] Was_error indication dirty bits clear for VFs 32 to 63. MCP writes
|
|
|
|
|
* 1 to a bit in this register in order to clear the corresponding bit in
|
|
|
|
|
* was_error_vf_63_32 register. */
|
|
|
|
|
#define PGLUE_B_REG_WAS_ERROR_VF_63_32_CLR 0x947c
|
|
|
|
|
/* [R 32] Was_error indication dirty bits for VFs 64 to 95. Each bit
|
|
|
|
|
* indicates that there was a completion with uncorrectable error for the
|
|
|
|
|
* corresponding VF. Set by PXP. Reset by MCP writing 1 to
|
|
|
|
|
* was_error_vf_95_64_clr. */
|
|
|
|
|
#define PGLUE_B_REG_WAS_ERROR_VF_95_64 0x9074
|
|
|
|
|
/* [W 32] Was_error indication dirty bits clear for VFs 64 to 95. MCP writes
|
|
|
|
|
* 1 to a bit in this register in order to clear the corresponding bit in
|
|
|
|
|
* was_error_vf_95_64 register. */
|
|
|
|
|
#define PGLUE_B_REG_WAS_ERROR_VF_95_64_CLR 0x9480
|
|
|
|
|
/* [RW 1] Type A PF enable inbound interrupt table for XSDM. 0 - disable; 1
|
|
|
|
|
* - enable. */
|
|
|
|
|
#define PGLUE_B_REG_XSDM_INB_INT_A_PF_ENABLE 0x9188
|
|
|
|
|
/* [RW 16] Start offset of XSDM zone A (queue zone) in the internal RAM */
|
|
|
|
|
#define PGLUE_B_REG_XSDM_START_OFFSET_A 0x90ec
|
|
|
|
|
/* [RW 16] Start offset of XSDM zone B (legacy zone) in the internal RAM */
|
|
|
|
|
#define PGLUE_B_REG_XSDM_START_OFFSET_B 0x90f4
|
|
|
|
|
/* [RW 5] VF Shift of XSDM zone B (legacy zone) in the internal RAM */
|
|
|
|
|
#define PGLUE_B_REG_XSDM_VF_SHIFT_B 0x90fc
|
|
|
|
|
/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */
|
|
|
|
|
#define PGLUE_B_REG_XSDM_ZONE_A_SIZE_PF 0x91a8
|
2007-11-16 02:09:02 +08:00
|
|
|
#define PRS_REG_A_PRSU_20 0x40134
|
|
|
|
|
/* [R 8] debug only: CFC load request current credit. Transaction based. */
|
|
|
|
|
#define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164
|
|
|
|
|
/* [R 8] debug only: CFC search request current credit. Transaction based. */
|
|
|
|
|
#define PRS_REG_CFC_SEARCH_CURRENT_CREDIT 0x40168
|
|
|
|
|
/* [RW 6] The initial credit for the search message to the CFC interface.
|
|
|
|
|
Credit is transaction based. */
|
|
|
|
|
#define PRS_REG_CFC_SEARCH_INITIAL_CREDIT 0x4011c
|
|
|
|
|
/* [RW 24] CID for port 0 if no match */
|
|
|
|
|
#define PRS_REG_CID_PORT_0 0x400fc
|
|
|
|
|
/* [RW 32] The CM header for flush message where 'load existed' bit in CFC
|
|
|
|
|
load response is reset and packet type is 0. Used in packet start message
|
|
|
|
|
to TCM. */
|
|
|
|
|
#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_0 0x400dc
|
|
|
|
|
#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_1 0x400e0
|
|
|
|
|
#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2 0x400e4
|
|
|
|
|
#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3 0x400e8
|
|
|
|
|
#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4 0x400ec
|
2009-02-16 15:24:08 +08:00
|
|
|
#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_5 0x400f0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] The CM header for flush message where 'load existed' bit in CFC
|
|
|
|
|
load response is set and packet type is 0. Used in packet start message
|
|
|
|
|
to TCM. */
|
|
|
|
|
#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_0 0x400bc
|
|
|
|
|
#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_1 0x400c0
|
|
|
|
|
#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2 0x400c4
|
|
|
|
|
#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3 0x400c8
|
|
|
|
|
#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4 0x400cc
|
2009-02-16 15:24:08 +08:00
|
|
|
#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_5 0x400d0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] The CM header for a match and packet type 1 for loopback port.
|
|
|
|
|
Used in packet start message to TCM. */
|
|
|
|
|
#define PRS_REG_CM_HDR_LOOPBACK_TYPE_1 0x4009c
|
|
|
|
|
#define PRS_REG_CM_HDR_LOOPBACK_TYPE_2 0x400a0
|
|
|
|
|
#define PRS_REG_CM_HDR_LOOPBACK_TYPE_3 0x400a4
|
|
|
|
|
#define PRS_REG_CM_HDR_LOOPBACK_TYPE_4 0x400a8
|
|
|
|
|
/* [RW 32] The CM header for a match and packet type 0. Used in packet start
|
|
|
|
|
message to TCM. */
|
|
|
|
|
#define PRS_REG_CM_HDR_TYPE_0 0x40078
|
|
|
|
|
#define PRS_REG_CM_HDR_TYPE_1 0x4007c
|
|
|
|
|
#define PRS_REG_CM_HDR_TYPE_2 0x40080
|
|
|
|
|
#define PRS_REG_CM_HDR_TYPE_3 0x40084
|
|
|
|
|
#define PRS_REG_CM_HDR_TYPE_4 0x40088
|
|
|
|
|
/* [RW 32] The CM header in case there was not a match on the connection */
|
|
|
|
|
#define PRS_REG_CM_NO_MATCH_HDR 0x400b8
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 1] Indicates if in e1hov mode. 0=non-e1hov mode; 1=e1hov mode. */
|
|
|
|
|
#define PRS_REG_E1HOV_MODE 0x401c8
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 8] The 8-bit event ID for a match and packet type 1. Used in packet
|
|
|
|
|
start message to TCM. */
|
|
|
|
|
#define PRS_REG_EVENT_ID_1 0x40054
|
|
|
|
|
#define PRS_REG_EVENT_ID_2 0x40058
|
|
|
|
|
#define PRS_REG_EVENT_ID_3 0x4005c
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 16] The Ethernet type value for FCoE */
|
|
|
|
|
#define PRS_REG_FCOE_TYPE 0x401d0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 8] Context region for flush packet with packet type 0. Used in CFC
|
|
|
|
|
load request message. */
|
|
|
|
|
#define PRS_REG_FLUSH_REGIONS_TYPE_0 0x40004
|
|
|
|
|
#define PRS_REG_FLUSH_REGIONS_TYPE_1 0x40008
|
|
|
|
|
#define PRS_REG_FLUSH_REGIONS_TYPE_2 0x4000c
|
|
|
|
|
#define PRS_REG_FLUSH_REGIONS_TYPE_3 0x40010
|
|
|
|
|
#define PRS_REG_FLUSH_REGIONS_TYPE_4 0x40014
|
|
|
|
|
#define PRS_REG_FLUSH_REGIONS_TYPE_5 0x40018
|
|
|
|
|
#define PRS_REG_FLUSH_REGIONS_TYPE_6 0x4001c
|
|
|
|
|
#define PRS_REG_FLUSH_REGIONS_TYPE_7 0x40020
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
|
|
|
|
|
* Ethernet header. */
|
|
|
|
|
#define PRS_REG_HDRS_AFTER_BASIC 0x40238
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 4] The increment value to send in the CFC load request message */
|
|
|
|
|
#define PRS_REG_INC_VALUE 0x40048
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [RW 6] Bit-map indicating which headers must appear in the packet */
|
|
|
|
|
#define PRS_REG_MUST_HAVE_HDRS 0x40254
|
2007-11-16 02:09:02 +08:00
|
|
|
#define PRS_REG_NIC_MODE 0x40138
|
|
|
|
|
/* [RW 8] The 8-bit event ID for cases where there is no match on the
|
|
|
|
|
connection. Used in packet start message to TCM. */
|
|
|
|
|
#define PRS_REG_NO_MATCH_EVENT_ID 0x40070
|
|
|
|
|
/* [ST 24] The number of input CFC flush packets */
|
|
|
|
|
#define PRS_REG_NUM_OF_CFC_FLUSH_MESSAGES 0x40128
|
|
|
|
|
/* [ST 32] The number of cycles the Parser halted its operation since it
|
|
|
|
|
could not allocate the next serial number */
|
|
|
|
|
#define PRS_REG_NUM_OF_DEAD_CYCLES 0x40130
|
|
|
|
|
/* [ST 24] The number of input packets */
|
|
|
|
|
#define PRS_REG_NUM_OF_PACKETS 0x40124
|
|
|
|
|
/* [ST 24] The number of input transparent flush packets */
|
|
|
|
|
#define PRS_REG_NUM_OF_TRANSPARENT_FLUSH_MESSAGES 0x4012c
|
|
|
|
|
/* [RW 8] Context region for received Ethernet packet with a match and
|
|
|
|
|
packet type 0. Used in CFC load request message */
|
|
|
|
|
#define PRS_REG_PACKET_REGIONS_TYPE_0 0x40028
|
|
|
|
|
#define PRS_REG_PACKET_REGIONS_TYPE_1 0x4002c
|
|
|
|
|
#define PRS_REG_PACKET_REGIONS_TYPE_2 0x40030
|
|
|
|
|
#define PRS_REG_PACKET_REGIONS_TYPE_3 0x40034
|
|
|
|
|
#define PRS_REG_PACKET_REGIONS_TYPE_4 0x40038
|
|
|
|
|
#define PRS_REG_PACKET_REGIONS_TYPE_5 0x4003c
|
|
|
|
|
#define PRS_REG_PACKET_REGIONS_TYPE_6 0x40040
|
|
|
|
|
#define PRS_REG_PACKET_REGIONS_TYPE_7 0x40044
|
|
|
|
|
/* [R 2] debug only: Number of pending requests for CAC on port 0. */
|
|
|
|
|
#define PRS_REG_PENDING_BRB_CAC0_RQ 0x40174
|
|
|
|
|
/* [R 2] debug only: Number of pending requests for header parsing. */
|
|
|
|
|
#define PRS_REG_PENDING_BRB_PRS_RQ 0x40170
|
|
|
|
|
/* [R 1] Interrupt register #0 read */
|
|
|
|
|
#define PRS_REG_PRS_INT_STS 0x40188
|
|
|
|
|
/* [RW 8] Parity mask register #0 read/write */
|
|
|
|
|
#define PRS_REG_PRS_PRTY_MASK 0x401a4
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 8] Parity register #0 read */
|
|
|
|
|
#define PRS_REG_PRS_PRTY_STS 0x40198
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 8] Context region for pure acknowledge packets. Used in CFC load
|
|
|
|
|
request message */
|
|
|
|
|
#define PRS_REG_PURE_REGIONS 0x40024
|
|
|
|
|
/* [R 32] debug only: Serial number status lsb 32 bits. '1' indicates this
|
|
|
|
|
serail number was released by SDM but cannot be used because a previous
|
|
|
|
|
serial number was not released. */
|
|
|
|
|
#define PRS_REG_SERIAL_NUM_STATUS_LSB 0x40154
|
|
|
|
|
/* [R 32] debug only: Serial number status msb 32 bits. '1' indicates this
|
|
|
|
|
serail number was released by SDM but cannot be used because a previous
|
|
|
|
|
serial number was not released. */
|
|
|
|
|
#define PRS_REG_SERIAL_NUM_STATUS_MSB 0x40158
|
|
|
|
|
/* [R 4] debug only: SRC current credit. Transaction based. */
|
|
|
|
|
#define PRS_REG_SRC_CURRENT_CREDIT 0x4016c
|
|
|
|
|
/* [R 8] debug only: TCM current credit. Cycle based. */
|
|
|
|
|
#define PRS_REG_TCM_CURRENT_CREDIT 0x40160
|
|
|
|
|
/* [R 8] debug only: TSDM current credit. Transaction based. */
|
|
|
|
|
#define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c
|
2010-10-06 11:28:26 +08:00
|
|
|
#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT (0x1<<19)
|
|
|
|
|
#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF (0x1<<20)
|
|
|
|
|
#define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN (0x1<<22)
|
|
|
|
|
#define PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED (0x1<<23)
|
|
|
|
|
#define PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED (0x1<<24)
|
|
|
|
|
#define PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR (0x1<<7)
|
|
|
|
|
#define PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR (0x1<<7)
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 6] Debug only: Number of used entries in the data FIFO */
|
|
|
|
|
#define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c
|
|
|
|
|
/* [R 7] Debug only: Number of used entries in the header FIFO */
|
|
|
|
|
#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478
|
2008-06-24 11:33:01 +08:00
|
|
|
#define PXP2_REG_PGL_ADDR_88_F0 0x120534
|
|
|
|
|
#define PXP2_REG_PGL_ADDR_8C_F0 0x120538
|
|
|
|
|
#define PXP2_REG_PGL_ADDR_90_F0 0x12053c
|
|
|
|
|
#define PXP2_REG_PGL_ADDR_94_F0 0x120540
|
2007-11-16 02:09:02 +08:00
|
|
|
#define PXP2_REG_PGL_CONTROL0 0x120490
|
|
|
|
|
#define PXP2_REG_PGL_CONTROL1 0x120514
|
2009-08-13 13:53:28 +08:00
|
|
|
#define PXP2_REG_PGL_DEBUG 0x120520
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] third dword data of expansion rom request. this register is
|
|
|
|
|
special. reading from it provides a vector outstanding read requests. if
|
|
|
|
|
a bit is zero it means that a read request on the corresponding tag did
|
|
|
|
|
not finish yet (not all completions have arrived for it) */
|
|
|
|
|
#define PXP2_REG_PGL_EXP_ROM2 0x120808
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] Inbound interrupt table for CSDM: bits[31:16]-mask;
|
|
|
|
|
its[15:0]-address */
|
|
|
|
|
#define PXP2_REG_PGL_INT_CSDM_0 0x1204f4
|
|
|
|
|
#define PXP2_REG_PGL_INT_CSDM_1 0x1204f8
|
|
|
|
|
#define PXP2_REG_PGL_INT_CSDM_2 0x1204fc
|
|
|
|
|
#define PXP2_REG_PGL_INT_CSDM_3 0x120500
|
|
|
|
|
#define PXP2_REG_PGL_INT_CSDM_4 0x120504
|
|
|
|
|
#define PXP2_REG_PGL_INT_CSDM_5 0x120508
|
|
|
|
|
#define PXP2_REG_PGL_INT_CSDM_6 0x12050c
|
|
|
|
|
#define PXP2_REG_PGL_INT_CSDM_7 0x120510
|
|
|
|
|
/* [RW 32] Inbound interrupt table for TSDM: bits[31:16]-mask;
|
|
|
|
|
its[15:0]-address */
|
|
|
|
|
#define PXP2_REG_PGL_INT_TSDM_0 0x120494
|
|
|
|
|
#define PXP2_REG_PGL_INT_TSDM_1 0x120498
|
|
|
|
|
#define PXP2_REG_PGL_INT_TSDM_2 0x12049c
|
|
|
|
|
#define PXP2_REG_PGL_INT_TSDM_3 0x1204a0
|
|
|
|
|
#define PXP2_REG_PGL_INT_TSDM_4 0x1204a4
|
|
|
|
|
#define PXP2_REG_PGL_INT_TSDM_5 0x1204a8
|
|
|
|
|
#define PXP2_REG_PGL_INT_TSDM_6 0x1204ac
|
|
|
|
|
#define PXP2_REG_PGL_INT_TSDM_7 0x1204b0
|
|
|
|
|
/* [RW 32] Inbound interrupt table for USDM: bits[31:16]-mask;
|
|
|
|
|
its[15:0]-address */
|
|
|
|
|
#define PXP2_REG_PGL_INT_USDM_0 0x1204b4
|
|
|
|
|
#define PXP2_REG_PGL_INT_USDM_1 0x1204b8
|
|
|
|
|
#define PXP2_REG_PGL_INT_USDM_2 0x1204bc
|
|
|
|
|
#define PXP2_REG_PGL_INT_USDM_3 0x1204c0
|
|
|
|
|
#define PXP2_REG_PGL_INT_USDM_4 0x1204c4
|
|
|
|
|
#define PXP2_REG_PGL_INT_USDM_5 0x1204c8
|
|
|
|
|
#define PXP2_REG_PGL_INT_USDM_6 0x1204cc
|
|
|
|
|
#define PXP2_REG_PGL_INT_USDM_7 0x1204d0
|
|
|
|
|
/* [RW 32] Inbound interrupt table for XSDM: bits[31:16]-mask;
|
|
|
|
|
its[15:0]-address */
|
|
|
|
|
#define PXP2_REG_PGL_INT_XSDM_0 0x1204d4
|
|
|
|
|
#define PXP2_REG_PGL_INT_XSDM_1 0x1204d8
|
|
|
|
|
#define PXP2_REG_PGL_INT_XSDM_2 0x1204dc
|
|
|
|
|
#define PXP2_REG_PGL_INT_XSDM_3 0x1204e0
|
|
|
|
|
#define PXP2_REG_PGL_INT_XSDM_4 0x1204e4
|
|
|
|
|
#define PXP2_REG_PGL_INT_XSDM_5 0x1204e8
|
|
|
|
|
#define PXP2_REG_PGL_INT_XSDM_6 0x1204ec
|
|
|
|
|
#define PXP2_REG_PGL_INT_XSDM_7 0x1204f0
|
2009-02-12 16:36:23 +08:00
|
|
|
/* [RW 3] this field allows one function to pretend being another function
|
|
|
|
|
when accessing any BAR mapped resource within the device. the value of
|
|
|
|
|
the field is the number of the function that will be accessed
|
|
|
|
|
effectively. after software write to this bit it must read it in order to
|
|
|
|
|
know that the new value is updated */
|
|
|
|
|
#define PXP2_REG_PGL_PRETEND_FUNC_F0 0x120674
|
|
|
|
|
#define PXP2_REG_PGL_PRETEND_FUNC_F1 0x120678
|
|
|
|
|
#define PXP2_REG_PGL_PRETEND_FUNC_F2 0x12067c
|
|
|
|
|
#define PXP2_REG_PGL_PRETEND_FUNC_F3 0x120680
|
|
|
|
|
#define PXP2_REG_PGL_PRETEND_FUNC_F4 0x120684
|
|
|
|
|
#define PXP2_REG_PGL_PRETEND_FUNC_F5 0x120688
|
|
|
|
|
#define PXP2_REG_PGL_PRETEND_FUNC_F6 0x12068c
|
|
|
|
|
#define PXP2_REG_PGL_PRETEND_FUNC_F7 0x120690
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 1] this bit indicates that a read request was blocked because of
|
|
|
|
|
bus_master_en was deasserted */
|
|
|
|
|
#define PXP2_REG_PGL_READ_BLOCKED 0x120568
|
2008-06-24 11:27:52 +08:00
|
|
|
#define PXP2_REG_PGL_TAGS_LIMIT 0x1205a8
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 18] debug only */
|
|
|
|
|
#define PXP2_REG_PGL_TXW_CDTS 0x12052c
|
|
|
|
|
/* [R 1] this bit indicates that a write request was blocked because of
|
|
|
|
|
bus_master_en was deasserted */
|
|
|
|
|
#define PXP2_REG_PGL_WRITE_BLOCKED 0x120564
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_ADD1 0x1201c0
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_ADD2 0x1201c4
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_ADD28 0x120228
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_ADD3 0x1201c8
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_ADD6 0x1201d4
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_ADD7 0x1201d8
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_ADD8 0x1201dc
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_ADD9 0x1201e0
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_CREDIT 0x12032c
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_L1 0x1202b0
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_L10 0x1202d4
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_L11 0x1202d8
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_L2 0x1202b4
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_L28 0x120318
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_L3 0x1202b8
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_L6 0x1202c4
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_L7 0x1202c8
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_L8 0x1202cc
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_L9 0x1202d0
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_RD 0x120324
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_UB1 0x120238
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_UB10 0x12025c
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_UB11 0x120260
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_UB2 0x12023c
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_UB28 0x1202a0
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_UB3 0x120240
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_UB6 0x12024c
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_UB7 0x120250
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_UB8 0x120254
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_UB9 0x120258
|
|
|
|
|
#define PXP2_REG_PSWRQ_BW_WR 0x120328
|
|
|
|
|
#define PXP2_REG_PSWRQ_CDU0_L2P 0x120000
|
|
|
|
|
#define PXP2_REG_PSWRQ_QM0_L2P 0x120038
|
|
|
|
|
#define PXP2_REG_PSWRQ_SRC0_L2P 0x120054
|
|
|
|
|
#define PXP2_REG_PSWRQ_TM0_L2P 0x12001c
|
2008-06-24 11:27:52 +08:00
|
|
|
#define PXP2_REG_PSWRQ_TSDM0_L2P 0x1200e0
|
2008-06-24 11:33:01 +08:00
|
|
|
/* [RW 32] Interrupt mask register #0 read/write */
|
|
|
|
|
#define PXP2_REG_PXP2_INT_MASK_0 0x120578
|
|
|
|
|
/* [R 32] Interrupt register #0 read */
|
|
|
|
|
#define PXP2_REG_PXP2_INT_STS_0 0x12056c
|
|
|
|
|
#define PXP2_REG_PXP2_INT_STS_1 0x120608
|
|
|
|
|
/* [RC 32] Interrupt register #0 read clear */
|
|
|
|
|
#define PXP2_REG_PXP2_INT_STS_CLR_0 0x120570
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] Parity mask register #0 read/write */
|
|
|
|
|
#define PXP2_REG_PXP2_PRTY_MASK_0 0x120588
|
|
|
|
|
#define PXP2_REG_PXP2_PRTY_MASK_1 0x120598
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 32] Parity register #0 read */
|
|
|
|
|
#define PXP2_REG_PXP2_PRTY_STS_0 0x12057c
|
|
|
|
|
#define PXP2_REG_PXP2_PRTY_STS_1 0x12058c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 1] Debug only: The 'almost full' indication from each fifo (gives
|
|
|
|
|
indication about backpressure) */
|
|
|
|
|
#define PXP2_REG_RD_ALMOST_FULL_0 0x120424
|
|
|
|
|
/* [R 8] Debug only: The blocks counter - number of unused block ids */
|
|
|
|
|
#define PXP2_REG_RD_BLK_CNT 0x120418
|
|
|
|
|
/* [RW 8] Debug only: Total number of available blocks in Tetris Buffer.
|
|
|
|
|
Must be bigger than 6. Normally should not be changed. */
|
|
|
|
|
#define PXP2_REG_RD_BLK_NUM_CFG 0x12040c
|
|
|
|
|
/* [RW 2] CDU byte swapping mode configuration for master read requests */
|
|
|
|
|
#define PXP2_REG_RD_CDURD_SWAP_MODE 0x120404
|
|
|
|
|
/* [RW 1] When '1'; inputs to the PSWRD block are ignored */
|
|
|
|
|
#define PXP2_REG_RD_DISABLE_INPUTS 0x120374
|
|
|
|
|
/* [R 1] PSWRD internal memories initialization is done */
|
|
|
|
|
#define PXP2_REG_RD_INIT_DONE 0x120370
|
|
|
|
|
/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
|
|
|
|
|
allocated for vq10 */
|
|
|
|
|
#define PXP2_REG_RD_MAX_BLKS_VQ10 0x1203a0
|
|
|
|
|
/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
|
|
|
|
|
allocated for vq11 */
|
|
|
|
|
#define PXP2_REG_RD_MAX_BLKS_VQ11 0x1203a4
|
|
|
|
|
/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
|
|
|
|
|
allocated for vq17 */
|
|
|
|
|
#define PXP2_REG_RD_MAX_BLKS_VQ17 0x1203bc
|
|
|
|
|
/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
|
|
|
|
|
allocated for vq18 */
|
|
|
|
|
#define PXP2_REG_RD_MAX_BLKS_VQ18 0x1203c0
|
|
|
|
|
/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
|
|
|
|
|
allocated for vq19 */
|
|
|
|
|
#define PXP2_REG_RD_MAX_BLKS_VQ19 0x1203c4
|
|
|
|
|
/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
|
|
|
|
|
allocated for vq22 */
|
|
|
|
|
#define PXP2_REG_RD_MAX_BLKS_VQ22 0x1203d0
|
2009-08-13 13:53:28 +08:00
|
|
|
/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
|
|
|
|
|
allocated for vq25 */
|
|
|
|
|
#define PXP2_REG_RD_MAX_BLKS_VQ25 0x1203dc
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
|
|
|
|
|
allocated for vq6 */
|
|
|
|
|
#define PXP2_REG_RD_MAX_BLKS_VQ6 0x120390
|
|
|
|
|
/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
|
|
|
|
|
allocated for vq9 */
|
|
|
|
|
#define PXP2_REG_RD_MAX_BLKS_VQ9 0x12039c
|
|
|
|
|
/* [RW 2] PBF byte swapping mode configuration for master read requests */
|
|
|
|
|
#define PXP2_REG_RD_PBF_SWAP_MODE 0x1203f4
|
|
|
|
|
/* [R 1] Debug only: Indication if delivery ports are idle */
|
|
|
|
|
#define PXP2_REG_RD_PORT_IS_IDLE_0 0x12041c
|
|
|
|
|
#define PXP2_REG_RD_PORT_IS_IDLE_1 0x120420
|
|
|
|
|
/* [RW 2] QM byte swapping mode configuration for master read requests */
|
|
|
|
|
#define PXP2_REG_RD_QM_SWAP_MODE 0x1203f8
|
|
|
|
|
/* [R 7] Debug only: The SR counter - number of unused sub request ids */
|
|
|
|
|
#define PXP2_REG_RD_SR_CNT 0x120414
|
|
|
|
|
/* [RW 2] SRC byte swapping mode configuration for master read requests */
|
|
|
|
|
#define PXP2_REG_RD_SRC_SWAP_MODE 0x120400
|
|
|
|
|
/* [RW 7] Debug only: Total number of available PCI read sub-requests. Must
|
|
|
|
|
be bigger than 1. Normally should not be changed. */
|
|
|
|
|
#define PXP2_REG_RD_SR_NUM_CFG 0x120408
|
|
|
|
|
/* [RW 1] Signals the PSWRD block to start initializing internal memories */
|
|
|
|
|
#define PXP2_REG_RD_START_INIT 0x12036c
|
|
|
|
|
/* [RW 2] TM byte swapping mode configuration for master read requests */
|
|
|
|
|
#define PXP2_REG_RD_TM_SWAP_MODE 0x1203fc
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ0 write requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD0 0x1201bc
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ12 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD12 0x1201ec
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ13 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD13 0x1201f0
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ14 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD14 0x1201f4
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ15 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD15 0x1201f8
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ16 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD16 0x1201fc
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ17 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD17 0x120200
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ18 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD18 0x120204
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ19 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD19 0x120208
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ20 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD20 0x12020c
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ22 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD22 0x120210
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ23 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD23 0x120214
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ24 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD24 0x120218
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ25 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD25 0x12021c
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ26 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD26 0x120220
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ27 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD27 0x120224
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ4 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD4 0x1201cc
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ5 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_ADD5 0x1201d0
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ0 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L0 0x1202ac
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ12 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L12 0x1202dc
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ13 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L13 0x1202e0
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ14 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L14 0x1202e4
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ15 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L15 0x1202e8
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ16 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L16 0x1202ec
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ17 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L17 0x1202f0
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ18 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L18 0x1202f4
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ19 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L19 0x1202f8
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ20 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L20 0x1202fc
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ22 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L22 0x120300
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ23 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L23 0x120304
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ24 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L24 0x120308
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ25 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L25 0x12030c
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ26 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L26 0x120310
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ27 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L27 0x120314
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ4 Read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L4 0x1202bc
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ5 Read- currently not used */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_L5 0x1202c0
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ0 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND0 0x120234
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ12 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND12 0x120264
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ13 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND13 0x120268
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ14 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND14 0x12026c
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ15 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND15 0x120270
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ16 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND16 0x120274
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ17 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND17 0x120278
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ18 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND18 0x12027c
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ19 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND19 0x120280
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ20 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND20 0x120284
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ22 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND22 0x120288
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ23 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND23 0x12028c
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ24 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND24 0x120290
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ25 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND25 0x120294
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ26 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND26 0x120298
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ27 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND27 0x12029c
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ4 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND4 0x120244
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ5 read requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_RD_UBOUND5 0x120248
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ29 write requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_WR_ADD29 0x12022c
|
|
|
|
|
/* [RW 10] Bandwidth addition to VQ30 write requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_WR_ADD30 0x120230
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ29 Write requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_WR_L29 0x12031c
|
|
|
|
|
/* [RW 10] Bandwidth Typical L for VQ30 Write requests */
|
|
|
|
|
#define PXP2_REG_RQ_BW_WR_L30 0x120320
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ29 */
|
|
|
|
|
#define PXP2_REG_RQ_BW_WR_UBOUND29 0x1202a4
|
|
|
|
|
/* [RW 7] Bandwidth upper bound for VQ30 */
|
|
|
|
|
#define PXP2_REG_RQ_BW_WR_UBOUND30 0x1202a8
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 18] external first_mem_addr field in L2P table for CDU module port 0 */
|
|
|
|
|
#define PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR 0x120008
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 2] Endian mode for cdu */
|
|
|
|
|
#define PXP2_REG_RQ_CDU_ENDIAN_M 0x1201a0
|
2008-06-24 11:27:52 +08:00
|
|
|
#define PXP2_REG_RQ_CDU_FIRST_ILT 0x12061c
|
|
|
|
|
#define PXP2_REG_RQ_CDU_LAST_ILT 0x120620
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 3] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k;
|
|
|
|
|
-128k */
|
|
|
|
|
#define PXP2_REG_RQ_CDU_P_SIZE 0x120018
|
|
|
|
|
/* [R 1] 1' indicates that the requester has finished its internal
|
|
|
|
|
configuration */
|
|
|
|
|
#define PXP2_REG_RQ_CFG_DONE 0x1201b4
|
|
|
|
|
/* [RW 2] Endian mode for debug */
|
|
|
|
|
#define PXP2_REG_RQ_DBG_ENDIAN_M 0x1201a4
|
|
|
|
|
/* [RW 1] When '1'; requests will enter input buffers but wont get out
|
|
|
|
|
towards the glue */
|
|
|
|
|
#define PXP2_REG_RQ_DISABLE_INPUTS 0x120330
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [RW 4] Determines alignment of write SRs when a request is split into
|
|
|
|
|
* several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B
|
|
|
|
|
* aligned. 4 - 512B aligned. */
|
2008-06-24 11:27:52 +08:00
|
|
|
#define PXP2_REG_RQ_DRAM_ALIGN 0x1205b0
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [RW 4] Determines alignment of read SRs when a request is split into
|
|
|
|
|
* several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B
|
|
|
|
|
* aligned. 4 - 512B aligned. */
|
|
|
|
|
#define PXP2_REG_RQ_DRAM_ALIGN_RD 0x12092c
|
|
|
|
|
/* [RW 1] when set the new alignment method (E2) will be applied; when reset
|
|
|
|
|
* the original alignment method (E1 E1H) will be applied */
|
|
|
|
|
#define PXP2_REG_RQ_DRAM_ALIGN_SEL 0x120930
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 1] If 1 ILT failiue will not result in ELT access; An interrupt will
|
|
|
|
|
be asserted */
|
|
|
|
|
#define PXP2_REG_RQ_ELT_DISABLE 0x12066c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 2] Endian mode for hc */
|
|
|
|
|
#define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 1] when '0' ILT logic will work as in A0; otherwise B0; for back
|
|
|
|
|
compatibility needs; Note that different registers are used per mode */
|
|
|
|
|
#define PXP2_REG_RQ_ILT_MODE 0x1205b4
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [WB 53] Onchip address table */
|
|
|
|
|
#define PXP2_REG_RQ_ONCHIP_AT 0x122000
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [WB 53] Onchip address table - B0 */
|
|
|
|
|
#define PXP2_REG_RQ_ONCHIP_AT_B0 0x128000
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [RW 13] Pending read limiter threshold; in Dwords */
|
|
|
|
|
#define PXP2_REG_RQ_PDR_LIMIT 0x12033c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 2] Endian mode for qm */
|
|
|
|
|
#define PXP2_REG_RQ_QM_ENDIAN_M 0x120194
|
2008-06-24 11:27:52 +08:00
|
|
|
#define PXP2_REG_RQ_QM_FIRST_ILT 0x120634
|
|
|
|
|
#define PXP2_REG_RQ_QM_LAST_ILT 0x120638
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
|
|
|
|
|
-128k */
|
|
|
|
|
#define PXP2_REG_RQ_QM_P_SIZE 0x120050
|
2008-08-14 06:59:08 +08:00
|
|
|
/* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define PXP2_REG_RQ_RBC_DONE 0x1201b0
|
|
|
|
|
/* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
|
|
|
|
|
001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
|
|
|
|
|
#define PXP2_REG_RQ_RD_MBS0 0x120160
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [RW 3] Max burst size filed for read requests port 1; 000 - 128B;
|
|
|
|
|
001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
|
|
|
|
|
#define PXP2_REG_RQ_RD_MBS1 0x120168
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 2] Endian mode for src */
|
|
|
|
|
#define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c
|
2008-06-24 11:27:52 +08:00
|
|
|
#define PXP2_REG_RQ_SRC_FIRST_ILT 0x12063c
|
|
|
|
|
#define PXP2_REG_RQ_SRC_LAST_ILT 0x120640
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k;
|
|
|
|
|
-128k */
|
|
|
|
|
#define PXP2_REG_RQ_SRC_P_SIZE 0x12006c
|
|
|
|
|
/* [RW 2] Endian mode for tm */
|
|
|
|
|
#define PXP2_REG_RQ_TM_ENDIAN_M 0x120198
|
2008-06-24 11:27:52 +08:00
|
|
|
#define PXP2_REG_RQ_TM_FIRST_ILT 0x120644
|
|
|
|
|
#define PXP2_REG_RQ_TM_LAST_ILT 0x120648
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 3] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k;
|
|
|
|
|
-128k */
|
|
|
|
|
#define PXP2_REG_RQ_TM_P_SIZE 0x120034
|
|
|
|
|
/* [R 5] Number of entries in the ufifo; his fifo has l2p completions */
|
|
|
|
|
#define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY 0x12080c
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 18] external first_mem_addr field in L2P table for USDM module port 0 */
|
|
|
|
|
#define PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR 0x120094
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 8] Number of entries occupied by vq 0 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ0_ENTRY_CNT 0x120810
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 10 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ10_ENTRY_CNT 0x120818
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 11 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ11_ENTRY_CNT 0x120820
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 12 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ12_ENTRY_CNT 0x120828
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 13 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ13_ENTRY_CNT 0x120830
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 14 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ14_ENTRY_CNT 0x120838
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 15 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ15_ENTRY_CNT 0x120840
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 16 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ16_ENTRY_CNT 0x120848
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 17 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ17_ENTRY_CNT 0x120850
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 18 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ18_ENTRY_CNT 0x120858
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 19 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ19_ENTRY_CNT 0x120860
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 1 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ1_ENTRY_CNT 0x120868
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 20 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ20_ENTRY_CNT 0x120870
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 21 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ21_ENTRY_CNT 0x120878
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 22 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ22_ENTRY_CNT 0x120880
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 23 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ23_ENTRY_CNT 0x120888
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 24 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ24_ENTRY_CNT 0x120890
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 25 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ25_ENTRY_CNT 0x120898
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 26 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ26_ENTRY_CNT 0x1208a0
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 27 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ27_ENTRY_CNT 0x1208a8
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 28 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ28_ENTRY_CNT 0x1208b0
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 29 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ29_ENTRY_CNT 0x1208b8
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 2 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ2_ENTRY_CNT 0x1208c0
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 30 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ30_ENTRY_CNT 0x1208c8
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 31 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ31_ENTRY_CNT 0x1208d0
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 3 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ3_ENTRY_CNT 0x1208d8
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 4 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ4_ENTRY_CNT 0x1208e0
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 5 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ5_ENTRY_CNT 0x1208e8
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 6 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ6_ENTRY_CNT 0x1208f0
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 7 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ7_ENTRY_CNT 0x1208f8
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 8 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ8_ENTRY_CNT 0x120900
|
|
|
|
|
/* [R 8] Number of entries occupied by vq 9 in pswrq memory */
|
|
|
|
|
#define PXP2_REG_RQ_VQ9_ENTRY_CNT 0x120908
|
|
|
|
|
/* [RW 3] Max burst size filed for write requests port 0; 000 - 128B;
|
|
|
|
|
001:256B; 010: 512B; */
|
|
|
|
|
#define PXP2_REG_RQ_WR_MBS0 0x12015c
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [RW 3] Max burst size filed for write requests port 1; 000 - 128B;
|
|
|
|
|
001:256B; 010: 512B; */
|
|
|
|
|
#define PXP2_REG_RQ_WR_MBS1 0x120164
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
|
|
|
|
|
buffer reaches this number has_payload will be asserted */
|
|
|
|
|
#define PXP2_REG_WR_CDU_MPS 0x1205f0
|
|
|
|
|
/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
|
|
|
|
|
buffer reaches this number has_payload will be asserted */
|
|
|
|
|
#define PXP2_REG_WR_CSDM_MPS 0x1205d0
|
|
|
|
|
/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
|
|
|
|
|
buffer reaches this number has_payload will be asserted */
|
|
|
|
|
#define PXP2_REG_WR_DBG_MPS 0x1205e8
|
|
|
|
|
/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
|
|
|
|
|
buffer reaches this number has_payload will be asserted */
|
|
|
|
|
#define PXP2_REG_WR_DMAE_MPS 0x1205ec
|
2008-08-14 06:59:08 +08:00
|
|
|
/* [RW 10] if Number of entries in dmae fifo will be higher than this
|
2007-11-16 02:09:02 +08:00
|
|
|
threshold then has_payload indication will be asserted; the default value
|
|
|
|
|
should be equal to > write MBS size! */
|
|
|
|
|
#define PXP2_REG_WR_DMAE_TH 0x120368
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
|
|
|
|
|
buffer reaches this number has_payload will be asserted */
|
|
|
|
|
#define PXP2_REG_WR_HC_MPS 0x1205c8
|
|
|
|
|
/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
|
|
|
|
|
buffer reaches this number has_payload will be asserted */
|
|
|
|
|
#define PXP2_REG_WR_QM_MPS 0x1205dc
|
|
|
|
|
/* [RW 1] 0 - working in A0 mode; - working in B0 mode */
|
|
|
|
|
#define PXP2_REG_WR_REV_MODE 0x120670
|
|
|
|
|
/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
|
|
|
|
|
buffer reaches this number has_payload will be asserted */
|
|
|
|
|
#define PXP2_REG_WR_SRC_MPS 0x1205e4
|
|
|
|
|
/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
|
|
|
|
|
buffer reaches this number has_payload will be asserted */
|
|
|
|
|
#define PXP2_REG_WR_TM_MPS 0x1205e0
|
|
|
|
|
/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
|
|
|
|
|
buffer reaches this number has_payload will be asserted */
|
|
|
|
|
#define PXP2_REG_WR_TSDM_MPS 0x1205d4
|
2008-08-14 06:59:08 +08:00
|
|
|
/* [RW 10] if Number of entries in usdmdp fifo will be higher than this
|
2008-02-29 03:51:50 +08:00
|
|
|
threshold then has_payload indication will be asserted; the default value
|
|
|
|
|
should be equal to > write MBS size! */
|
|
|
|
|
#define PXP2_REG_WR_USDMDP_TH 0x120348
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
|
|
|
|
|
buffer reaches this number has_payload will be asserted */
|
|
|
|
|
#define PXP2_REG_WR_USDM_MPS 0x1205cc
|
|
|
|
|
/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
|
|
|
|
|
buffer reaches this number has_payload will be asserted */
|
|
|
|
|
#define PXP2_REG_WR_XSDM_MPS 0x1205d8
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 1] debug only: Indication if PSWHST arbiter is idle */
|
|
|
|
|
#define PXP_REG_HST_ARB_IS_IDLE 0x103004
|
|
|
|
|
/* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means
|
|
|
|
|
this client is waiting for the arbiter. */
|
|
|
|
|
#define PXP_REG_HST_CLIENTS_WAITING_TO_ARB 0x103008
|
2010-04-19 09:13:12 +08:00
|
|
|
/* [RW 1] When 1; doorbells are discarded and not passed to doorbell queue
|
|
|
|
|
block. Should be used for close the gates. */
|
|
|
|
|
#define PXP_REG_HST_DISCARD_DOORBELLS 0x1030a4
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit
|
|
|
|
|
should update accoring to 'hst_discard_doorbells' register when the state
|
|
|
|
|
machine is idle */
|
|
|
|
|
#define PXP_REG_HST_DISCARD_DOORBELLS_STATUS 0x1030a0
|
2010-04-19 09:13:12 +08:00
|
|
|
/* [RW 1] When 1; new internal writes arriving to the block are discarded.
|
|
|
|
|
Should be used for close the gates. */
|
|
|
|
|
#define PXP_REG_HST_DISCARD_INTERNAL_WRITES 0x1030a8
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1'
|
|
|
|
|
means this PSWHST is discarding inputs from this client. Each bit should
|
|
|
|
|
update accoring to 'hst_discard_internal_writes' register when the state
|
|
|
|
|
machine is idle. */
|
|
|
|
|
#define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [WB 160] Used for initialization of the inbound interrupts memory */
|
|
|
|
|
#define PXP_REG_HST_INBOUND_INT 0x103800
|
|
|
|
|
/* [RW 32] Interrupt mask register #0 read/write */
|
|
|
|
|
#define PXP_REG_PXP_INT_MASK_0 0x103074
|
|
|
|
|
#define PXP_REG_PXP_INT_MASK_1 0x103084
|
|
|
|
|
/* [R 32] Interrupt register #0 read */
|
|
|
|
|
#define PXP_REG_PXP_INT_STS_0 0x103068
|
|
|
|
|
#define PXP_REG_PXP_INT_STS_1 0x103078
|
|
|
|
|
/* [RC 32] Interrupt register #0 read clear */
|
|
|
|
|
#define PXP_REG_PXP_INT_STS_CLR_0 0x10306c
|
2010-10-06 11:28:26 +08:00
|
|
|
#define PXP_REG_PXP_INT_STS_CLR_1 0x10307c
|
|
|
|
|
/* [RW 27] Parity mask register #0 read/write */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define PXP_REG_PXP_PRTY_MASK 0x103094
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 26] Parity register #0 read */
|
|
|
|
|
#define PXP_REG_PXP_PRTY_STS 0x103088
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 4] The activity counter initial increment value sent in the load
|
|
|
|
|
request */
|
|
|
|
|
#define QM_REG_ACTCTRINITVAL_0 0x168040
|
|
|
|
|
#define QM_REG_ACTCTRINITVAL_1 0x168044
|
|
|
|
|
#define QM_REG_ACTCTRINITVAL_2 0x168048
|
|
|
|
|
#define QM_REG_ACTCTRINITVAL_3 0x16804c
|
|
|
|
|
/* [RW 32] The base logical address (in bytes) of each physical queue. The
|
|
|
|
|
index I represents the physical queue number. The 12 lsbs are ignore and
|
2008-06-24 11:27:52 +08:00
|
|
|
considered zero so practically there are only 20 bits in this register;
|
|
|
|
|
queues 63-0 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_BASEADDR 0x168900
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 32] The base logical address (in bytes) of each physical queue. The
|
|
|
|
|
index I represents the physical queue number. The 12 lsbs are ignore and
|
|
|
|
|
considered zero so practically there are only 20 bits in this register;
|
|
|
|
|
queues 127-64 */
|
|
|
|
|
#define QM_REG_BASEADDR_EXT_A 0x16e100
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 16] The byte credit cost for each task. This value is for both ports */
|
|
|
|
|
#define QM_REG_BYTECRDCOST 0x168234
|
|
|
|
|
/* [RW 16] The initial byte credit value for both ports. */
|
|
|
|
|
#define QM_REG_BYTECRDINITVAL 0x168238
|
|
|
|
|
/* [RW 32] A bit per physical queue. If the bit is cleared then the physical
|
2008-06-24 11:27:52 +08:00
|
|
|
queue uses port 0 else it uses port 1; queues 31-0 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_BYTECRDPORT_LSB 0x168228
|
|
|
|
|
/* [RW 32] A bit per physical queue. If the bit is cleared then the physical
|
2008-06-24 11:27:52 +08:00
|
|
|
queue uses port 0 else it uses port 1; queues 95-64 */
|
|
|
|
|
#define QM_REG_BYTECRDPORT_LSB_EXT_A 0x16e520
|
|
|
|
|
/* [RW 32] A bit per physical queue. If the bit is cleared then the physical
|
|
|
|
|
queue uses port 0 else it uses port 1; queues 63-32 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_BYTECRDPORT_MSB 0x168224
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] A bit per physical queue. If the bit is cleared then the physical
|
|
|
|
|
queue uses port 0 else it uses port 1; queues 127-96 */
|
|
|
|
|
#define QM_REG_BYTECRDPORT_MSB_EXT_A 0x16e51c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 16] The byte credit value that if above the QM is considered almost
|
|
|
|
|
full */
|
|
|
|
|
#define QM_REG_BYTECREDITAFULLTHR 0x168094
|
|
|
|
|
/* [RW 4] The initial credit for interface */
|
|
|
|
|
#define QM_REG_CMINITCRD_0 0x1680cc
|
|
|
|
|
#define QM_REG_CMINITCRD_1 0x1680d0
|
|
|
|
|
#define QM_REG_CMINITCRD_2 0x1680d4
|
|
|
|
|
#define QM_REG_CMINITCRD_3 0x1680d8
|
|
|
|
|
#define QM_REG_CMINITCRD_4 0x1680dc
|
|
|
|
|
#define QM_REG_CMINITCRD_5 0x1680e0
|
|
|
|
|
#define QM_REG_CMINITCRD_6 0x1680e4
|
|
|
|
|
#define QM_REG_CMINITCRD_7 0x1680e8
|
|
|
|
|
/* [RW 8] A mask bit per CM interface. If this bit is 0 then this interface
|
|
|
|
|
is masked */
|
|
|
|
|
#define QM_REG_CMINTEN 0x1680ec
|
|
|
|
|
/* [RW 12] A bit vector which indicates which one of the queues are tied to
|
|
|
|
|
interface 0 */
|
|
|
|
|
#define QM_REG_CMINTVOQMASK_0 0x1681f4
|
|
|
|
|
#define QM_REG_CMINTVOQMASK_1 0x1681f8
|
|
|
|
|
#define QM_REG_CMINTVOQMASK_2 0x1681fc
|
|
|
|
|
#define QM_REG_CMINTVOQMASK_3 0x168200
|
|
|
|
|
#define QM_REG_CMINTVOQMASK_4 0x168204
|
|
|
|
|
#define QM_REG_CMINTVOQMASK_5 0x168208
|
|
|
|
|
#define QM_REG_CMINTVOQMASK_6 0x16820c
|
|
|
|
|
#define QM_REG_CMINTVOQMASK_7 0x168210
|
|
|
|
|
/* [RW 20] The number of connections divided by 16 which dictates the size
|
2008-06-24 11:27:52 +08:00
|
|
|
of each queue which belongs to even function number. */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_CONNNUM_0 0x168020
|
|
|
|
|
/* [R 6] Keep the fill level of the fifo from write client 4 */
|
|
|
|
|
#define QM_REG_CQM_WRC_FIFOLVL 0x168018
|
|
|
|
|
/* [RW 8] The context regions sent in the CFC load request */
|
|
|
|
|
#define QM_REG_CTXREG_0 0x168030
|
|
|
|
|
#define QM_REG_CTXREG_1 0x168034
|
|
|
|
|
#define QM_REG_CTXREG_2 0x168038
|
|
|
|
|
#define QM_REG_CTXREG_3 0x16803c
|
|
|
|
|
/* [RW 12] The VOQ mask used to select the VOQs which needs to be full for
|
|
|
|
|
bypass enable */
|
|
|
|
|
#define QM_REG_ENBYPVOQMASK 0x16823c
|
|
|
|
|
/* [RW 32] A bit mask per each physical queue. If a bit is set then the
|
2008-06-24 11:27:52 +08:00
|
|
|
physical queue uses the byte credit; queues 31-0 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_ENBYTECRD_LSB 0x168220
|
|
|
|
|
/* [RW 32] A bit mask per each physical queue. If a bit is set then the
|
2008-06-24 11:27:52 +08:00
|
|
|
physical queue uses the byte credit; queues 95-64 */
|
|
|
|
|
#define QM_REG_ENBYTECRD_LSB_EXT_A 0x16e518
|
|
|
|
|
/* [RW 32] A bit mask per each physical queue. If a bit is set then the
|
|
|
|
|
physical queue uses the byte credit; queues 63-32 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_ENBYTECRD_MSB 0x16821c
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] A bit mask per each physical queue. If a bit is set then the
|
|
|
|
|
physical queue uses the byte credit; queues 127-96 */
|
|
|
|
|
#define QM_REG_ENBYTECRD_MSB_EXT_A 0x16e514
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 4] If cleared then the secondary interface will not be served by the
|
|
|
|
|
RR arbiter */
|
|
|
|
|
#define QM_REG_ENSEC 0x1680f0
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] NA */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_FUNCNUMSEL_LSB 0x168230
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] NA */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_FUNCNUMSEL_MSB 0x16822c
|
|
|
|
|
/* [RW 32] A mask register to mask the Almost empty signals which will not
|
2008-06-24 11:27:52 +08:00
|
|
|
be use for the almost empty indication to the HW block; queues 31:0 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_HWAEMPTYMASK_LSB 0x168218
|
|
|
|
|
/* [RW 32] A mask register to mask the Almost empty signals which will not
|
2008-06-24 11:27:52 +08:00
|
|
|
be use for the almost empty indication to the HW block; queues 95-64 */
|
|
|
|
|
#define QM_REG_HWAEMPTYMASK_LSB_EXT_A 0x16e510
|
|
|
|
|
/* [RW 32] A mask register to mask the Almost empty signals which will not
|
|
|
|
|
be use for the almost empty indication to the HW block; queues 63:32 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_HWAEMPTYMASK_MSB 0x168214
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] A mask register to mask the Almost empty signals which will not
|
|
|
|
|
be use for the almost empty indication to the HW block; queues 127-96 */
|
|
|
|
|
#define QM_REG_HWAEMPTYMASK_MSB_EXT_A 0x16e50c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 4] The number of outstanding request to CFC */
|
|
|
|
|
#define QM_REG_OUTLDREQ 0x168804
|
|
|
|
|
/* [RC 1] A flag to indicate that overflow error occurred in one of the
|
|
|
|
|
queues. */
|
|
|
|
|
#define QM_REG_OVFERROR 0x16805c
|
tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-14 23:09:05 +08:00
|
|
|
/* [RC 7] the Q where the overflow occurs */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_OVFQNUM 0x168058
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 16] Pause state for physical queues 15-0 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_PAUSESTATE0 0x168410
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 16] Pause state for physical queues 31-16 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_PAUSESTATE1 0x168414
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 16] Pause state for physical queues 47-32 */
|
|
|
|
|
#define QM_REG_PAUSESTATE2 0x16e684
|
|
|
|
|
/* [R 16] Pause state for physical queues 63-48 */
|
|
|
|
|
#define QM_REG_PAUSESTATE3 0x16e688
|
|
|
|
|
/* [R 16] Pause state for physical queues 79-64 */
|
|
|
|
|
#define QM_REG_PAUSESTATE4 0x16e68c
|
|
|
|
|
/* [R 16] Pause state for physical queues 95-80 */
|
|
|
|
|
#define QM_REG_PAUSESTATE5 0x16e690
|
|
|
|
|
/* [R 16] Pause state for physical queues 111-96 */
|
|
|
|
|
#define QM_REG_PAUSESTATE6 0x16e694
|
|
|
|
|
/* [R 16] Pause state for physical queues 127-112 */
|
|
|
|
|
#define QM_REG_PAUSESTATE7 0x16e698
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 2] The PCI attributes field used in the PCI request. */
|
|
|
|
|
#define QM_REG_PCIREQAT 0x168054
|
2010-10-06 11:28:26 +08:00
|
|
|
#define QM_REG_PF_EN 0x16e70c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 16] The byte credit of port 0 */
|
|
|
|
|
#define QM_REG_PORT0BYTECRD 0x168300
|
|
|
|
|
/* [R 16] The byte credit of port 1 */
|
|
|
|
|
#define QM_REG_PORT1BYTECRD 0x168304
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 3] pci function number of queues 15-0 */
|
|
|
|
|
#define QM_REG_PQ2PCIFUNC_0 0x16e6bc
|
|
|
|
|
#define QM_REG_PQ2PCIFUNC_1 0x16e6c0
|
|
|
|
|
#define QM_REG_PQ2PCIFUNC_2 0x16e6c4
|
|
|
|
|
#define QM_REG_PQ2PCIFUNC_3 0x16e6c8
|
|
|
|
|
#define QM_REG_PQ2PCIFUNC_4 0x16e6cc
|
|
|
|
|
#define QM_REG_PQ2PCIFUNC_5 0x16e6d0
|
|
|
|
|
#define QM_REG_PQ2PCIFUNC_6 0x16e6d4
|
|
|
|
|
#define QM_REG_PQ2PCIFUNC_7 0x16e6d8
|
|
|
|
|
/* [WB 54] Pointer Table Memory for queues 63-0; The mapping is as follow:
|
|
|
|
|
ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
|
|
|
|
|
bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_PTRTBL 0x168a00
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [WB 54] Pointer Table Memory for queues 127-64; The mapping is as follow:
|
|
|
|
|
ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
|
|
|
|
|
bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
|
|
|
|
|
#define QM_REG_PTRTBL_EXT_A 0x16e200
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 2] Interrupt mask register #0 read/write */
|
|
|
|
|
#define QM_REG_QM_INT_MASK 0x168444
|
|
|
|
|
/* [R 2] Interrupt register #0 read */
|
|
|
|
|
#define QM_REG_QM_INT_STS 0x168438
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 12] Parity mask register #0 read/write */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_QM_PRTY_MASK 0x168454
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 12] Parity register #0 read */
|
2008-02-29 03:51:50 +08:00
|
|
|
#define QM_REG_QM_PRTY_STS 0x168448
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 32] Current queues in pipeline: Queues from 32 to 63 */
|
|
|
|
|
#define QM_REG_QSTATUS_HIGH 0x16802c
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 32] Current queues in pipeline: Queues from 96 to 127 */
|
|
|
|
|
#define QM_REG_QSTATUS_HIGH_EXT_A 0x16e408
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 32] Current queues in pipeline: Queues from 0 to 31 */
|
|
|
|
|
#define QM_REG_QSTATUS_LOW 0x168028
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 32] Current queues in pipeline: Queues from 64 to 95 */
|
|
|
|
|
#define QM_REG_QSTATUS_LOW_EXT_A 0x16e404
|
|
|
|
|
/* [R 24] The number of tasks queued for each queue; queues 63-0 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_QTASKCTR_0 0x168308
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 24] The number of tasks queued for each queue; queues 127-64 */
|
|
|
|
|
#define QM_REG_QTASKCTR_EXT_A_0 0x16e584
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 4] Queue tied to VOQ */
|
|
|
|
|
#define QM_REG_QVOQIDX_0 0x1680f4
|
|
|
|
|
#define QM_REG_QVOQIDX_10 0x16811c
|
2008-06-24 11:27:52 +08:00
|
|
|
#define QM_REG_QVOQIDX_100 0x16e49c
|
|
|
|
|
#define QM_REG_QVOQIDX_101 0x16e4a0
|
|
|
|
|
#define QM_REG_QVOQIDX_102 0x16e4a4
|
|
|
|
|
#define QM_REG_QVOQIDX_103 0x16e4a8
|
|
|
|
|
#define QM_REG_QVOQIDX_104 0x16e4ac
|
|
|
|
|
#define QM_REG_QVOQIDX_105 0x16e4b0
|
|
|
|
|
#define QM_REG_QVOQIDX_106 0x16e4b4
|
|
|
|
|
#define QM_REG_QVOQIDX_107 0x16e4b8
|
|
|
|
|
#define QM_REG_QVOQIDX_108 0x16e4bc
|
|
|
|
|
#define QM_REG_QVOQIDX_109 0x16e4c0
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_QVOQIDX_11 0x168120
|
2008-06-24 11:27:52 +08:00
|
|
|
#define QM_REG_QVOQIDX_110 0x16e4c4
|
|
|
|
|
#define QM_REG_QVOQIDX_111 0x16e4c8
|
|
|
|
|
#define QM_REG_QVOQIDX_112 0x16e4cc
|
|
|
|
|
#define QM_REG_QVOQIDX_113 0x16e4d0
|
|
|
|
|
#define QM_REG_QVOQIDX_114 0x16e4d4
|
|
|
|
|
#define QM_REG_QVOQIDX_115 0x16e4d8
|
|
|
|
|
#define QM_REG_QVOQIDX_116 0x16e4dc
|
|
|
|
|
#define QM_REG_QVOQIDX_117 0x16e4e0
|
|
|
|
|
#define QM_REG_QVOQIDX_118 0x16e4e4
|
|
|
|
|
#define QM_REG_QVOQIDX_119 0x16e4e8
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_QVOQIDX_12 0x168124
|
2008-06-24 11:27:52 +08:00
|
|
|
#define QM_REG_QVOQIDX_120 0x16e4ec
|
|
|
|
|
#define QM_REG_QVOQIDX_121 0x16e4f0
|
|
|
|
|
#define QM_REG_QVOQIDX_122 0x16e4f4
|
|
|
|
|
#define QM_REG_QVOQIDX_123 0x16e4f8
|
|
|
|
|
#define QM_REG_QVOQIDX_124 0x16e4fc
|
|
|
|
|
#define QM_REG_QVOQIDX_125 0x16e500
|
|
|
|
|
#define QM_REG_QVOQIDX_126 0x16e504
|
|
|
|
|
#define QM_REG_QVOQIDX_127 0x16e508
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_QVOQIDX_13 0x168128
|
|
|
|
|
#define QM_REG_QVOQIDX_14 0x16812c
|
|
|
|
|
#define QM_REG_QVOQIDX_15 0x168130
|
|
|
|
|
#define QM_REG_QVOQIDX_16 0x168134
|
|
|
|
|
#define QM_REG_QVOQIDX_17 0x168138
|
|
|
|
|
#define QM_REG_QVOQIDX_21 0x168148
|
2008-06-24 11:27:52 +08:00
|
|
|
#define QM_REG_QVOQIDX_22 0x16814c
|
|
|
|
|
#define QM_REG_QVOQIDX_23 0x168150
|
|
|
|
|
#define QM_REG_QVOQIDX_24 0x168154
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_QVOQIDX_25 0x168158
|
2008-06-24 11:27:52 +08:00
|
|
|
#define QM_REG_QVOQIDX_26 0x16815c
|
|
|
|
|
#define QM_REG_QVOQIDX_27 0x168160
|
|
|
|
|
#define QM_REG_QVOQIDX_28 0x168164
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_QVOQIDX_29 0x168168
|
2008-06-24 11:27:52 +08:00
|
|
|
#define QM_REG_QVOQIDX_30 0x16816c
|
|
|
|
|
#define QM_REG_QVOQIDX_31 0x168170
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_QVOQIDX_32 0x168174
|
|
|
|
|
#define QM_REG_QVOQIDX_33 0x168178
|
|
|
|
|
#define QM_REG_QVOQIDX_34 0x16817c
|
|
|
|
|
#define QM_REG_QVOQIDX_35 0x168180
|
|
|
|
|
#define QM_REG_QVOQIDX_36 0x168184
|
|
|
|
|
#define QM_REG_QVOQIDX_37 0x168188
|
|
|
|
|
#define QM_REG_QVOQIDX_38 0x16818c
|
|
|
|
|
#define QM_REG_QVOQIDX_39 0x168190
|
|
|
|
|
#define QM_REG_QVOQIDX_40 0x168194
|
|
|
|
|
#define QM_REG_QVOQIDX_41 0x168198
|
|
|
|
|
#define QM_REG_QVOQIDX_42 0x16819c
|
|
|
|
|
#define QM_REG_QVOQIDX_43 0x1681a0
|
|
|
|
|
#define QM_REG_QVOQIDX_44 0x1681a4
|
|
|
|
|
#define QM_REG_QVOQIDX_45 0x1681a8
|
|
|
|
|
#define QM_REG_QVOQIDX_46 0x1681ac
|
|
|
|
|
#define QM_REG_QVOQIDX_47 0x1681b0
|
|
|
|
|
#define QM_REG_QVOQIDX_48 0x1681b4
|
|
|
|
|
#define QM_REG_QVOQIDX_49 0x1681b8
|
|
|
|
|
#define QM_REG_QVOQIDX_5 0x168108
|
|
|
|
|
#define QM_REG_QVOQIDX_50 0x1681bc
|
|
|
|
|
#define QM_REG_QVOQIDX_51 0x1681c0
|
|
|
|
|
#define QM_REG_QVOQIDX_52 0x1681c4
|
|
|
|
|
#define QM_REG_QVOQIDX_53 0x1681c8
|
|
|
|
|
#define QM_REG_QVOQIDX_54 0x1681cc
|
|
|
|
|
#define QM_REG_QVOQIDX_55 0x1681d0
|
|
|
|
|
#define QM_REG_QVOQIDX_56 0x1681d4
|
|
|
|
|
#define QM_REG_QVOQIDX_57 0x1681d8
|
|
|
|
|
#define QM_REG_QVOQIDX_58 0x1681dc
|
|
|
|
|
#define QM_REG_QVOQIDX_59 0x1681e0
|
|
|
|
|
#define QM_REG_QVOQIDX_6 0x16810c
|
|
|
|
|
#define QM_REG_QVOQIDX_60 0x1681e4
|
|
|
|
|
#define QM_REG_QVOQIDX_61 0x1681e8
|
|
|
|
|
#define QM_REG_QVOQIDX_62 0x1681ec
|
|
|
|
|
#define QM_REG_QVOQIDX_63 0x1681f0
|
2008-06-24 11:27:52 +08:00
|
|
|
#define QM_REG_QVOQIDX_64 0x16e40c
|
|
|
|
|
#define QM_REG_QVOQIDX_65 0x16e410
|
|
|
|
|
#define QM_REG_QVOQIDX_69 0x16e420
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_QVOQIDX_7 0x168110
|
2008-06-24 11:27:52 +08:00
|
|
|
#define QM_REG_QVOQIDX_70 0x16e424
|
|
|
|
|
#define QM_REG_QVOQIDX_71 0x16e428
|
|
|
|
|
#define QM_REG_QVOQIDX_72 0x16e42c
|
|
|
|
|
#define QM_REG_QVOQIDX_73 0x16e430
|
|
|
|
|
#define QM_REG_QVOQIDX_74 0x16e434
|
|
|
|
|
#define QM_REG_QVOQIDX_75 0x16e438
|
|
|
|
|
#define QM_REG_QVOQIDX_76 0x16e43c
|
|
|
|
|
#define QM_REG_QVOQIDX_77 0x16e440
|
|
|
|
|
#define QM_REG_QVOQIDX_78 0x16e444
|
|
|
|
|
#define QM_REG_QVOQIDX_79 0x16e448
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_QVOQIDX_8 0x168114
|
2008-06-24 11:27:52 +08:00
|
|
|
#define QM_REG_QVOQIDX_80 0x16e44c
|
|
|
|
|
#define QM_REG_QVOQIDX_81 0x16e450
|
|
|
|
|
#define QM_REG_QVOQIDX_85 0x16e460
|
|
|
|
|
#define QM_REG_QVOQIDX_86 0x16e464
|
|
|
|
|
#define QM_REG_QVOQIDX_87 0x16e468
|
|
|
|
|
#define QM_REG_QVOQIDX_88 0x16e46c
|
|
|
|
|
#define QM_REG_QVOQIDX_89 0x16e470
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_QVOQIDX_9 0x168118
|
2008-06-24 11:27:52 +08:00
|
|
|
#define QM_REG_QVOQIDX_90 0x16e474
|
|
|
|
|
#define QM_REG_QVOQIDX_91 0x16e478
|
|
|
|
|
#define QM_REG_QVOQIDX_92 0x16e47c
|
|
|
|
|
#define QM_REG_QVOQIDX_93 0x16e480
|
|
|
|
|
#define QM_REG_QVOQIDX_94 0x16e484
|
|
|
|
|
#define QM_REG_QVOQIDX_95 0x16e488
|
|
|
|
|
#define QM_REG_QVOQIDX_96 0x16e48c
|
|
|
|
|
#define QM_REG_QVOQIDX_97 0x16e490
|
|
|
|
|
#define QM_REG_QVOQIDX_98 0x16e494
|
|
|
|
|
#define QM_REG_QVOQIDX_99 0x16e498
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Initialization bit command */
|
|
|
|
|
#define QM_REG_SOFT_RESET 0x168428
|
|
|
|
|
/* [RW 8] The credit cost per every task in the QM. A value per each VOQ */
|
|
|
|
|
#define QM_REG_TASKCRDCOST_0 0x16809c
|
|
|
|
|
#define QM_REG_TASKCRDCOST_1 0x1680a0
|
|
|
|
|
#define QM_REG_TASKCRDCOST_2 0x1680a4
|
|
|
|
|
#define QM_REG_TASKCRDCOST_4 0x1680ac
|
|
|
|
|
#define QM_REG_TASKCRDCOST_5 0x1680b0
|
|
|
|
|
/* [R 6] Keep the fill level of the fifo from write client 3 */
|
|
|
|
|
#define QM_REG_TQM_WRC_FIFOLVL 0x168010
|
|
|
|
|
/* [R 6] Keep the fill level of the fifo from write client 2 */
|
|
|
|
|
#define QM_REG_UQM_WRC_FIFOLVL 0x168008
|
|
|
|
|
/* [RC 32] Credit update error register */
|
|
|
|
|
#define QM_REG_VOQCRDERRREG 0x168408
|
|
|
|
|
/* [R 16] The credit value for each VOQ */
|
|
|
|
|
#define QM_REG_VOQCREDIT_0 0x1682d0
|
|
|
|
|
#define QM_REG_VOQCREDIT_1 0x1682d4
|
|
|
|
|
#define QM_REG_VOQCREDIT_4 0x1682e0
|
|
|
|
|
/* [RW 16] The credit value that if above the QM is considered almost full */
|
|
|
|
|
#define QM_REG_VOQCREDITAFULLTHR 0x168090
|
|
|
|
|
/* [RW 16] The init and maximum credit for each VoQ */
|
|
|
|
|
#define QM_REG_VOQINITCREDIT_0 0x168060
|
|
|
|
|
#define QM_REG_VOQINITCREDIT_1 0x168064
|
|
|
|
|
#define QM_REG_VOQINITCREDIT_2 0x168068
|
|
|
|
|
#define QM_REG_VOQINITCREDIT_4 0x168070
|
|
|
|
|
#define QM_REG_VOQINITCREDIT_5 0x168074
|
|
|
|
|
/* [RW 1] The port of which VOQ belongs */
|
2008-06-24 11:27:52 +08:00
|
|
|
#define QM_REG_VOQPORT_0 0x1682a0
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQPORT_1 0x1682a4
|
|
|
|
|
#define QM_REG_VOQPORT_2 0x1682a8
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_0_LSB 0x168240
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
|
|
|
|
|
#define QM_REG_VOQQMASK_0_LSB_EXT_A 0x16e524
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_0_MSB 0x168244
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
|
|
|
|
|
#define QM_REG_VOQQMASK_0_MSB_EXT_A 0x16e528
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
|
|
|
|
|
#define QM_REG_VOQQMASK_10_LSB 0x168290
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
|
|
|
|
|
#define QM_REG_VOQQMASK_10_LSB_EXT_A 0x16e574
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
|
|
|
|
|
#define QM_REG_VOQQMASK_10_MSB 0x168294
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
|
|
|
|
|
#define QM_REG_VOQQMASK_10_MSB_EXT_A 0x16e578
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
|
|
|
|
|
#define QM_REG_VOQQMASK_11_LSB 0x168298
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
|
|
|
|
|
#define QM_REG_VOQQMASK_11_LSB_EXT_A 0x16e57c
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
|
|
|
|
|
#define QM_REG_VOQQMASK_11_MSB 0x16829c
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
|
|
|
|
|
#define QM_REG_VOQQMASK_11_MSB_EXT_A 0x16e580
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
|
|
|
|
|
#define QM_REG_VOQQMASK_1_LSB 0x168248
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
|
|
|
|
|
#define QM_REG_VOQQMASK_1_LSB_EXT_A 0x16e52c
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_1_MSB 0x16824c
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
|
|
|
|
|
#define QM_REG_VOQQMASK_1_MSB_EXT_A 0x16e530
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_2_LSB 0x168250
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
|
|
|
|
|
#define QM_REG_VOQQMASK_2_LSB_EXT_A 0x16e534
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_2_MSB 0x168254
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
|
|
|
|
|
#define QM_REG_VOQQMASK_2_MSB_EXT_A 0x16e538
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_3_LSB 0x168258
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
|
|
|
|
|
#define QM_REG_VOQQMASK_3_LSB_EXT_A 0x16e53c
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
|
|
|
|
|
#define QM_REG_VOQQMASK_3_MSB_EXT_A 0x16e540
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_4_LSB 0x168260
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
|
|
|
|
|
#define QM_REG_VOQQMASK_4_LSB_EXT_A 0x16e544
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_4_MSB 0x168264
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
|
|
|
|
|
#define QM_REG_VOQQMASK_4_MSB_EXT_A 0x16e548
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_5_LSB 0x168268
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
|
|
|
|
|
#define QM_REG_VOQQMASK_5_LSB_EXT_A 0x16e54c
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_5_MSB 0x16826c
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
|
|
|
|
|
#define QM_REG_VOQQMASK_5_MSB_EXT_A 0x16e550
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_6_LSB 0x168270
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
|
|
|
|
|
#define QM_REG_VOQQMASK_6_LSB_EXT_A 0x16e554
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_6_MSB 0x168274
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
|
|
|
|
|
#define QM_REG_VOQQMASK_6_MSB_EXT_A 0x16e558
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_7_LSB 0x168278
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
|
|
|
|
|
#define QM_REG_VOQQMASK_7_LSB_EXT_A 0x16e55c
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_7_MSB 0x16827c
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
|
|
|
|
|
#define QM_REG_VOQQMASK_7_MSB_EXT_A 0x16e560
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_8_LSB 0x168280
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
|
|
|
|
|
#define QM_REG_VOQQMASK_8_LSB_EXT_A 0x16e564
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_8_MSB 0x168284
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
|
|
|
|
|
#define QM_REG_VOQQMASK_8_MSB_EXT_A 0x16e568
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_VOQQMASK_9_LSB 0x168288
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
|
|
|
|
|
#define QM_REG_VOQQMASK_9_LSB_EXT_A 0x16e56c
|
|
|
|
|
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
|
|
|
|
|
#define QM_REG_VOQQMASK_9_MSB_EXT_A 0x16e570
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] Wrr weights */
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_0 0x16880c
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_1 0x168810
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_10 0x168814
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_11 0x168818
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_12 0x16881c
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_13 0x168820
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_14 0x168824
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_15 0x168828
|
2008-06-24 11:27:52 +08:00
|
|
|
#define QM_REG_WRRWEIGHTS_16 0x16e000
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_17 0x16e004
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_18 0x16e008
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_19 0x16e00c
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_WRRWEIGHTS_2 0x16882c
|
2008-06-24 11:27:52 +08:00
|
|
|
#define QM_REG_WRRWEIGHTS_20 0x16e010
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_21 0x16e014
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_22 0x16e018
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_23 0x16e01c
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_24 0x16e020
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_25 0x16e024
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_26 0x16e028
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_27 0x16e02c
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_28 0x16e030
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_29 0x16e034
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_WRRWEIGHTS_3 0x168830
|
2008-06-24 11:27:52 +08:00
|
|
|
#define QM_REG_WRRWEIGHTS_30 0x16e038
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_31 0x16e03c
|
2007-11-16 02:09:02 +08:00
|
|
|
#define QM_REG_WRRWEIGHTS_4 0x168834
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_5 0x168838
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_6 0x16883c
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_7 0x168840
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_8 0x168844
|
|
|
|
|
#define QM_REG_WRRWEIGHTS_9 0x168848
|
|
|
|
|
/* [R 6] Keep the fill level of the fifo from write client 1 */
|
|
|
|
|
#define QM_REG_XQM_WRC_FIFOLVL 0x168000
|
|
|
|
|
#define SRC_REG_COUNTFREE0 0x40500
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 1] If clr the searcher is compatible to E1 A0 - support only two
|
|
|
|
|
ports. If set the searcher support 8 functions. */
|
|
|
|
|
#define SRC_REG_E1HMF_ENABLE 0x404cc
|
2007-11-16 02:09:02 +08:00
|
|
|
#define SRC_REG_FIRSTFREE0 0x40510
|
|
|
|
|
#define SRC_REG_KEYRSS0_0 0x40408
|
2008-06-24 11:27:52 +08:00
|
|
|
#define SRC_REG_KEYRSS0_7 0x40424
|
2007-11-16 02:09:02 +08:00
|
|
|
#define SRC_REG_KEYRSS1_9 0x40454
|
2009-02-16 15:24:08 +08:00
|
|
|
#define SRC_REG_KEYSEARCH_0 0x40458
|
|
|
|
|
#define SRC_REG_KEYSEARCH_1 0x4045c
|
|
|
|
|
#define SRC_REG_KEYSEARCH_2 0x40460
|
|
|
|
|
#define SRC_REG_KEYSEARCH_3 0x40464
|
|
|
|
|
#define SRC_REG_KEYSEARCH_4 0x40468
|
|
|
|
|
#define SRC_REG_KEYSEARCH_5 0x4046c
|
|
|
|
|
#define SRC_REG_KEYSEARCH_6 0x40470
|
|
|
|
|
#define SRC_REG_KEYSEARCH_7 0x40474
|
|
|
|
|
#define SRC_REG_KEYSEARCH_8 0x40478
|
|
|
|
|
#define SRC_REG_KEYSEARCH_9 0x4047c
|
2007-11-16 02:09:02 +08:00
|
|
|
#define SRC_REG_LASTFREE0 0x40530
|
|
|
|
|
#define SRC_REG_NUMBER_HASH_BITS0 0x40400
|
|
|
|
|
/* [RW 1] Reset internal state machines. */
|
|
|
|
|
#define SRC_REG_SOFT_RST 0x4049c
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 3] Interrupt register #0 read */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define SRC_REG_SRC_INT_STS 0x404ac
|
|
|
|
|
/* [RW 3] Parity mask register #0 read/write */
|
|
|
|
|
#define SRC_REG_SRC_PRTY_MASK 0x404c8
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 3] Parity register #0 read */
|
|
|
|
|
#define SRC_REG_SRC_PRTY_STS 0x404bc
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
|
|
|
|
|
#define TCM_REG_CAM_OCCUP 0x5017c
|
|
|
|
|
/* [RW 1] CDU AG read Interface enable. If 0 - the request input is
|
|
|
|
|
disregarded; valid output is deasserted; all other signals are treated as
|
|
|
|
|
usual; if 1 - normal activity. */
|
|
|
|
|
#define TCM_REG_CDU_AG_RD_IFEN 0x50034
|
|
|
|
|
/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
|
|
|
|
|
are disregarded; all other signals are treated as usual; if 1 - normal
|
|
|
|
|
activity. */
|
|
|
|
|
#define TCM_REG_CDU_AG_WR_IFEN 0x50030
|
|
|
|
|
/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
|
|
|
|
|
disregarded; valid output is deasserted; all other signals are treated as
|
|
|
|
|
usual; if 1 - normal activity. */
|
|
|
|
|
#define TCM_REG_CDU_SM_RD_IFEN 0x5003c
|
|
|
|
|
/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
|
|
|
|
|
input is disregarded; all other signals are treated as usual; if 1 -
|
|
|
|
|
normal activity. */
|
|
|
|
|
#define TCM_REG_CDU_SM_WR_IFEN 0x50038
|
|
|
|
|
/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
|
|
|
|
|
the initial credit value; read returns the current value of the credit
|
|
|
|
|
counter. Must be initialized to 1 at start-up. */
|
|
|
|
|
#define TCM_REG_CFC_INIT_CRD 0x50204
|
|
|
|
|
/* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define TCM_REG_CP_WEIGHT 0x500c0
|
|
|
|
|
/* [RW 1] Input csem Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define TCM_REG_CSEM_IFEN 0x5002c
|
|
|
|
|
/* [RC 1] Message length mismatch (relative to last indication) at the In#9
|
|
|
|
|
interface. */
|
|
|
|
|
#define TCM_REG_CSEM_LENGTH_MIS 0x50174
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define TCM_REG_CSEM_WEIGHT 0x500bc
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 8] The Event ID in case of ErrorFlg is set in the input message. */
|
|
|
|
|
#define TCM_REG_ERR_EVNT_ID 0x500a0
|
|
|
|
|
/* [RW 28] The CM erroneous header for QM and Timers formatting. */
|
|
|
|
|
#define TCM_REG_ERR_TCM_HDR 0x5009c
|
|
|
|
|
/* [RW 8] The Event ID for Timers expiration. */
|
|
|
|
|
#define TCM_REG_EXPR_EVNT_ID 0x500a4
|
|
|
|
|
/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
|
|
|
|
|
writes the initial credit value; read returns the current value of the
|
|
|
|
|
credit counter. Must be initialized to 64 at start-up. */
|
|
|
|
|
#define TCM_REG_FIC0_INIT_CRD 0x5020c
|
|
|
|
|
/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
|
|
|
|
|
writes the initial credit value; read returns the current value of the
|
|
|
|
|
credit counter. Must be initialized to 64 at start-up. */
|
|
|
|
|
#define TCM_REG_FIC1_INIT_CRD 0x50210
|
|
|
|
|
/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
|
|
|
|
|
- strict priority defined by ~tcm_registers_gr_ag_pr.gr_ag_pr;
|
|
|
|
|
~tcm_registers_gr_ld0_pr.gr_ld0_pr and
|
|
|
|
|
~tcm_registers_gr_ld1_pr.gr_ld1_pr. */
|
|
|
|
|
#define TCM_REG_GR_ARB_TYPE 0x50114
|
|
|
|
|
/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
|
|
|
|
|
highest priority is 3. It is supposed that the Store channel is the
|
|
|
|
|
compliment of the other 3 groups. */
|
|
|
|
|
#define TCM_REG_GR_LD0_PR 0x5011c
|
|
|
|
|
/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
|
|
|
|
|
highest priority is 3. It is supposed that the Store channel is the
|
|
|
|
|
compliment of the other 3 groups. */
|
|
|
|
|
#define TCM_REG_GR_LD1_PR 0x50120
|
|
|
|
|
/* [RW 4] The number of double REG-pairs; loaded from the STORM context and
|
|
|
|
|
sent to STORM; for a specific connection type. The double REG-pairs are
|
|
|
|
|
used to align to STORM context row size of 128 bits. The offset of these
|
|
|
|
|
data in the STORM context is always 0. Index _i stands for the connection
|
|
|
|
|
type (one of 16). */
|
|
|
|
|
#define TCM_REG_N_SM_CTX_LD_0 0x50050
|
|
|
|
|
#define TCM_REG_N_SM_CTX_LD_1 0x50054
|
|
|
|
|
#define TCM_REG_N_SM_CTX_LD_2 0x50058
|
|
|
|
|
#define TCM_REG_N_SM_CTX_LD_3 0x5005c
|
|
|
|
|
#define TCM_REG_N_SM_CTX_LD_4 0x50060
|
2009-02-16 15:24:08 +08:00
|
|
|
#define TCM_REG_N_SM_CTX_LD_5 0x50064
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define TCM_REG_PBF_IFEN 0x50024
|
|
|
|
|
/* [RC 1] Message length mismatch (relative to last indication) at the In#7
|
|
|
|
|
interface. */
|
|
|
|
|
#define TCM_REG_PBF_LENGTH_MIS 0x5016c
|
|
|
|
|
/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define TCM_REG_PBF_WEIGHT 0x500b4
|
|
|
|
|
#define TCM_REG_PHYS_QNUM0_0 0x500e0
|
|
|
|
|
#define TCM_REG_PHYS_QNUM0_1 0x500e4
|
|
|
|
|
#define TCM_REG_PHYS_QNUM1_0 0x500e8
|
2008-06-24 11:27:52 +08:00
|
|
|
#define TCM_REG_PHYS_QNUM1_1 0x500ec
|
|
|
|
|
#define TCM_REG_PHYS_QNUM2_0 0x500f0
|
|
|
|
|
#define TCM_REG_PHYS_QNUM2_1 0x500f4
|
|
|
|
|
#define TCM_REG_PHYS_QNUM3_0 0x500f8
|
|
|
|
|
#define TCM_REG_PHYS_QNUM3_1 0x500fc
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define TCM_REG_PRS_IFEN 0x50020
|
|
|
|
|
/* [RC 1] Message length mismatch (relative to last indication) at the In#6
|
|
|
|
|
interface. */
|
|
|
|
|
#define TCM_REG_PRS_LENGTH_MIS 0x50168
|
|
|
|
|
/* [RW 3] The weight of the input prs in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define TCM_REG_PRS_WEIGHT 0x500b0
|
|
|
|
|
/* [RW 8] The Event ID for Timers formatting in case of stop done. */
|
|
|
|
|
#define TCM_REG_STOP_EVNT_ID 0x500a8
|
|
|
|
|
/* [RC 1] Message length mismatch (relative to last indication) at the STORM
|
|
|
|
|
interface. */
|
|
|
|
|
#define TCM_REG_STORM_LENGTH_MIS 0x50160
|
|
|
|
|
/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define TCM_REG_STORM_TCM_IFEN 0x50010
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define TCM_REG_STORM_WEIGHT 0x500ac
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define TCM_REG_TCM_CFC_IFEN 0x50040
|
|
|
|
|
/* [RW 11] Interrupt mask register #0 read/write */
|
|
|
|
|
#define TCM_REG_TCM_INT_MASK 0x501dc
|
|
|
|
|
/* [R 11] Interrupt register #0 read */
|
|
|
|
|
#define TCM_REG_TCM_INT_STS 0x501d0
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 27] Parity register #0 read */
|
|
|
|
|
#define TCM_REG_TCM_PRTY_STS 0x501e0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
|
|
|
|
|
REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
|
|
|
|
|
Is used to determine the number of the AG context REG-pairs written back;
|
|
|
|
|
when the input message Reg1WbFlg isn't set. */
|
|
|
|
|
#define TCM_REG_TCM_REG0_SZ 0x500d8
|
|
|
|
|
/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
|
|
|
|
|
disregarded; valid is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define TCM_REG_TCM_STORM0_IFEN 0x50004
|
|
|
|
|
/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
|
|
|
|
|
disregarded; valid is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define TCM_REG_TCM_STORM1_IFEN 0x50008
|
|
|
|
|
/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
|
|
|
|
|
disregarded; valid is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define TCM_REG_TCM_TQM_IFEN 0x5000c
|
|
|
|
|
/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
|
|
|
|
|
#define TCM_REG_TCM_TQM_USE_Q 0x500d4
|
|
|
|
|
/* [RW 28] The CM header for Timers expiration command. */
|
|
|
|
|
#define TCM_REG_TM_TCM_HDR 0x50098
|
|
|
|
|
/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define TCM_REG_TM_TCM_IFEN 0x5001c
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define TCM_REG_TM_WEIGHT 0x500d0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 6] QM output initial credit. Max credit available - 32.Write writes
|
|
|
|
|
the initial credit value; read returns the current value of the credit
|
|
|
|
|
counter. Must be initialized to 32 at start-up. */
|
|
|
|
|
#define TCM_REG_TQM_INIT_CRD 0x5021c
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
|
|
|
|
|
stands for weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define TCM_REG_TQM_P_WEIGHT 0x500c8
|
|
|
|
|
/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
|
|
|
|
|
stands for weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define TCM_REG_TQM_S_WEIGHT 0x500cc
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 28] The CM header value for QM request (primary). */
|
|
|
|
|
#define TCM_REG_TQM_TCM_HDR_P 0x50090
|
|
|
|
|
/* [RW 28] The CM header value for QM request (secondary). */
|
|
|
|
|
#define TCM_REG_TQM_TCM_HDR_S 0x50094
|
|
|
|
|
/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define TCM_REG_TQM_TCM_IFEN 0x50014
|
|
|
|
|
/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define TCM_REG_TSDM_IFEN 0x50018
|
|
|
|
|
/* [RC 1] Message length mismatch (relative to last indication) at the SDM
|
|
|
|
|
interface. */
|
|
|
|
|
#define TCM_REG_TSDM_LENGTH_MIS 0x50164
|
|
|
|
|
/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define TCM_REG_TSDM_WEIGHT 0x500c4
|
|
|
|
|
/* [RW 1] Input usem Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define TCM_REG_USEM_IFEN 0x50028
|
|
|
|
|
/* [RC 1] Message length mismatch (relative to last indication) at the In#8
|
|
|
|
|
interface. */
|
|
|
|
|
#define TCM_REG_USEM_LENGTH_MIS 0x50170
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define TCM_REG_USEM_WEIGHT 0x500b8
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 21] Indirect access to the descriptor table of the XX protection
|
|
|
|
|
mechanism. The fields are: [5:0] - length of the message; 15:6] - message
|
|
|
|
|
pointer; 20:16] - next pointer. */
|
|
|
|
|
#define TCM_REG_XX_DESCR_TABLE 0x50280
|
2008-06-24 11:27:52 +08:00
|
|
|
#define TCM_REG_XX_DESCR_TABLE_SIZE 32
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 6] Use to read the value of XX protection Free counter. */
|
|
|
|
|
#define TCM_REG_XX_FREE 0x50178
|
|
|
|
|
/* [RW 6] Initial value for the credit counter; responsible for fulfilling
|
|
|
|
|
of the Input Stage XX protection buffer by the XX protection pending
|
|
|
|
|
messages. Max credit available - 127.Write writes the initial credit
|
|
|
|
|
value; read returns the current value of the credit counter. Must be
|
|
|
|
|
initialized to 19 at start-up. */
|
|
|
|
|
#define TCM_REG_XX_INIT_CRD 0x50220
|
|
|
|
|
/* [RW 6] Maximum link list size (messages locked) per connection in the XX
|
|
|
|
|
protection. */
|
|
|
|
|
#define TCM_REG_XX_MAX_LL_SZ 0x50044
|
|
|
|
|
/* [RW 6] The maximum number of pending messages; which may be stored in XX
|
|
|
|
|
protection. ~tcm_registers_xx_free.xx_free is read on read. */
|
|
|
|
|
#define TCM_REG_XX_MSG_NUM 0x50224
|
|
|
|
|
/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
|
|
|
|
|
#define TCM_REG_XX_OVFL_EVNT_ID 0x50048
|
|
|
|
|
/* [RW 16] Indirect access to the XX table of the XX protection mechanism.
|
|
|
|
|
The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] -
|
|
|
|
|
header pointer. */
|
|
|
|
|
#define TCM_REG_XX_TABLE 0x50240
|
2009-07-07 17:54:23 +08:00
|
|
|
/* [RW 4] Load value for cfc ac credit cnt. */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define TM_REG_CFC_AC_CRDCNT_VAL 0x164208
|
|
|
|
|
/* [RW 4] Load value for cfc cld credit cnt. */
|
|
|
|
|
#define TM_REG_CFC_CLD_CRDCNT_VAL 0x164210
|
|
|
|
|
/* [RW 8] Client0 context region. */
|
|
|
|
|
#define TM_REG_CL0_CONT_REGION 0x164030
|
|
|
|
|
/* [RW 8] Client1 context region. */
|
|
|
|
|
#define TM_REG_CL1_CONT_REGION 0x164034
|
|
|
|
|
/* [RW 8] Client2 context region. */
|
|
|
|
|
#define TM_REG_CL2_CONT_REGION 0x164038
|
|
|
|
|
/* [RW 2] Client in High priority client number. */
|
|
|
|
|
#define TM_REG_CLIN_PRIOR0_CLIENT 0x164024
|
|
|
|
|
/* [RW 4] Load value for clout0 cred cnt. */
|
|
|
|
|
#define TM_REG_CLOUT_CRDCNT0_VAL 0x164220
|
|
|
|
|
/* [RW 4] Load value for clout1 cred cnt. */
|
|
|
|
|
#define TM_REG_CLOUT_CRDCNT1_VAL 0x164228
|
|
|
|
|
/* [RW 4] Load value for clout2 cred cnt. */
|
|
|
|
|
#define TM_REG_CLOUT_CRDCNT2_VAL 0x164230
|
|
|
|
|
/* [RW 1] Enable client0 input. */
|
|
|
|
|
#define TM_REG_EN_CL0_INPUT 0x164008
|
|
|
|
|
/* [RW 1] Enable client1 input. */
|
|
|
|
|
#define TM_REG_EN_CL1_INPUT 0x16400c
|
|
|
|
|
/* [RW 1] Enable client2 input. */
|
|
|
|
|
#define TM_REG_EN_CL2_INPUT 0x164010
|
2009-02-16 15:24:08 +08:00
|
|
|
#define TM_REG_EN_LINEAR0_TIMER 0x164014
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Enable real time counter. */
|
|
|
|
|
#define TM_REG_EN_REAL_TIME_CNT 0x1640d8
|
|
|
|
|
/* [RW 1] Enable for Timers state machines. */
|
|
|
|
|
#define TM_REG_EN_TIMERS 0x164000
|
|
|
|
|
/* [RW 4] Load value for expiration credit cnt. CFC max number of
|
|
|
|
|
outstanding load requests for timers (expiration) context loading. */
|
|
|
|
|
#define TM_REG_EXP_CRDCNT_VAL 0x164238
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 32] Linear0 logic address. */
|
|
|
|
|
#define TM_REG_LIN0_LOGIC_ADDR 0x164240
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 18] Linear0 Max active cid (in banks of 32 entries). */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048
|
|
|
|
|
/* [WB 64] Linear0 phy address. */
|
|
|
|
|
#define TM_REG_LIN0_PHY_ADDR 0x164270
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 1] Linear0 physical address valid. */
|
|
|
|
|
#define TM_REG_LIN0_PHY_ADDR_VALID 0x164248
|
2009-08-13 13:53:28 +08:00
|
|
|
#define TM_REG_LIN0_SCAN_ON 0x1640d0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 24] Linear0 array scan timeout. */
|
|
|
|
|
#define TM_REG_LIN0_SCAN_TIME 0x16403c
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 32] Linear1 logic address. */
|
|
|
|
|
#define TM_REG_LIN1_LOGIC_ADDR 0x164250
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [WB 64] Linear1 phy address. */
|
|
|
|
|
#define TM_REG_LIN1_PHY_ADDR 0x164280
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 1] Linear1 physical address valid. */
|
|
|
|
|
#define TM_REG_LIN1_PHY_ADDR_VALID 0x164258
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 6] Linear timer set_clear fifo threshold. */
|
|
|
|
|
#define TM_REG_LIN_SETCLR_FIFO_ALFULL_THR 0x164070
|
|
|
|
|
/* [RW 2] Load value for pci arbiter credit cnt. */
|
|
|
|
|
#define TM_REG_PCIARB_CRDCNT_VAL 0x164260
|
|
|
|
|
/* [RW 20] The amount of hardware cycles for each timer tick. */
|
|
|
|
|
#define TM_REG_TIMER_TICK_SIZE 0x16401c
|
|
|
|
|
/* [RW 8] Timers Context region. */
|
|
|
|
|
#define TM_REG_TM_CONTEXT_REGION 0x164044
|
|
|
|
|
/* [RW 1] Interrupt mask register #0 read/write */
|
|
|
|
|
#define TM_REG_TM_INT_MASK 0x1640fc
|
|
|
|
|
/* [R 1] Interrupt register #0 read */
|
|
|
|
|
#define TM_REG_TM_INT_STS 0x1640f0
|
|
|
|
|
/* [RW 8] The event id for aggregated interrupt 0 */
|
|
|
|
|
#define TSDM_REG_AGG_INT_EVENT_0 0x42038
|
2009-02-16 15:24:08 +08:00
|
|
|
#define TSDM_REG_AGG_INT_EVENT_1 0x4203c
|
2008-06-24 11:27:52 +08:00
|
|
|
#define TSDM_REG_AGG_INT_EVENT_2 0x42040
|
|
|
|
|
#define TSDM_REG_AGG_INT_EVENT_3 0x42044
|
|
|
|
|
#define TSDM_REG_AGG_INT_EVENT_4 0x42048
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 1] The T bit for aggregated interrupt 0 */
|
|
|
|
|
#define TSDM_REG_AGG_INT_T_0 0x420b8
|
|
|
|
|
#define TSDM_REG_AGG_INT_T_1 0x420bc
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
|
|
|
|
|
#define TSDM_REG_CFC_RSP_START_ADDR 0x42008
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #0 */
|
|
|
|
|
#define TSDM_REG_CMP_COUNTER_MAX0 0x4201c
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #1 */
|
|
|
|
|
#define TSDM_REG_CMP_COUNTER_MAX1 0x42020
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #2 */
|
|
|
|
|
#define TSDM_REG_CMP_COUNTER_MAX2 0x42024
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #3 */
|
|
|
|
|
#define TSDM_REG_CMP_COUNTER_MAX3 0x42028
|
|
|
|
|
/* [RW 13] The start address in the internal RAM for the completion
|
|
|
|
|
counters. */
|
|
|
|
|
#define TSDM_REG_CMP_COUNTER_START_ADDR 0x4200c
|
|
|
|
|
#define TSDM_REG_ENABLE_IN1 0x42238
|
|
|
|
|
#define TSDM_REG_ENABLE_IN2 0x4223c
|
|
|
|
|
#define TSDM_REG_ENABLE_OUT1 0x42240
|
|
|
|
|
#define TSDM_REG_ENABLE_OUT2 0x42244
|
|
|
|
|
/* [RW 4] The initial number of messages that can be sent to the pxp control
|
|
|
|
|
interface without receiving any ACK. */
|
|
|
|
|
#define TSDM_REG_INIT_CREDIT_PXP_CTRL 0x424bc
|
|
|
|
|
/* [ST 32] The number of ACK after placement messages received */
|
|
|
|
|
#define TSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x4227c
|
|
|
|
|
/* [ST 32] The number of packet end messages received from the parser */
|
|
|
|
|
#define TSDM_REG_NUM_OF_PKT_END_MSG 0x42274
|
|
|
|
|
/* [ST 32] The number of requests received from the pxp async if */
|
|
|
|
|
#define TSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x42278
|
|
|
|
|
/* [ST 32] The number of commands received in queue 0 */
|
|
|
|
|
#define TSDM_REG_NUM_OF_Q0_CMD 0x42248
|
|
|
|
|
/* [ST 32] The number of commands received in queue 10 */
|
|
|
|
|
#define TSDM_REG_NUM_OF_Q10_CMD 0x4226c
|
|
|
|
|
/* [ST 32] The number of commands received in queue 11 */
|
|
|
|
|
#define TSDM_REG_NUM_OF_Q11_CMD 0x42270
|
|
|
|
|
/* [ST 32] The number of commands received in queue 1 */
|
|
|
|
|
#define TSDM_REG_NUM_OF_Q1_CMD 0x4224c
|
|
|
|
|
/* [ST 32] The number of commands received in queue 3 */
|
|
|
|
|
#define TSDM_REG_NUM_OF_Q3_CMD 0x42250
|
|
|
|
|
/* [ST 32] The number of commands received in queue 4 */
|
|
|
|
|
#define TSDM_REG_NUM_OF_Q4_CMD 0x42254
|
|
|
|
|
/* [ST 32] The number of commands received in queue 5 */
|
|
|
|
|
#define TSDM_REG_NUM_OF_Q5_CMD 0x42258
|
|
|
|
|
/* [ST 32] The number of commands received in queue 6 */
|
|
|
|
|
#define TSDM_REG_NUM_OF_Q6_CMD 0x4225c
|
|
|
|
|
/* [ST 32] The number of commands received in queue 7 */
|
|
|
|
|
#define TSDM_REG_NUM_OF_Q7_CMD 0x42260
|
|
|
|
|
/* [ST 32] The number of commands received in queue 8 */
|
|
|
|
|
#define TSDM_REG_NUM_OF_Q8_CMD 0x42264
|
|
|
|
|
/* [ST 32] The number of commands received in queue 9 */
|
|
|
|
|
#define TSDM_REG_NUM_OF_Q9_CMD 0x42268
|
|
|
|
|
/* [RW 13] The start address in the internal RAM for the packet end message */
|
|
|
|
|
#define TSDM_REG_PCK_END_MSG_START_ADDR 0x42014
|
|
|
|
|
/* [RW 13] The start address in the internal RAM for queue counters */
|
|
|
|
|
#define TSDM_REG_Q_COUNTER_START_ADDR 0x42010
|
|
|
|
|
/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
|
|
|
|
|
#define TSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x42548
|
|
|
|
|
/* [R 1] parser fifo empty in sdm_sync block */
|
|
|
|
|
#define TSDM_REG_SYNC_PARSER_EMPTY 0x42550
|
|
|
|
|
/* [R 1] parser serial fifo empty in sdm_sync block */
|
|
|
|
|
#define TSDM_REG_SYNC_SYNC_EMPTY 0x42558
|
|
|
|
|
/* [RW 32] Tick for timer counter. Applicable only when
|
|
|
|
|
~tsdm_registers_timer_tick_enable.timer_tick_enable =1 */
|
|
|
|
|
#define TSDM_REG_TIMER_TICK 0x42000
|
|
|
|
|
/* [RW 32] Interrupt mask register #0 read/write */
|
|
|
|
|
#define TSDM_REG_TSDM_INT_MASK_0 0x4229c
|
|
|
|
|
#define TSDM_REG_TSDM_INT_MASK_1 0x422ac
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 32] Interrupt register #0 read */
|
|
|
|
|
#define TSDM_REG_TSDM_INT_STS_0 0x42290
|
|
|
|
|
#define TSDM_REG_TSDM_INT_STS_1 0x422a0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 11] Parity mask register #0 read/write */
|
|
|
|
|
#define TSDM_REG_TSDM_PRTY_MASK 0x422bc
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 11] Parity register #0 read */
|
|
|
|
|
#define TSDM_REG_TSDM_PRTY_STS 0x422b0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 5] The number of time_slots in the arbitration cycle */
|
|
|
|
|
#define TSEM_REG_ARB_CYCLE_SIZE 0x180034
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 0. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2 */
|
|
|
|
|
#define TSEM_REG_ARB_ELEMENT0 0x180020
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 1. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.
|
|
|
|
|
Could not be equal to register ~tsem_registers_arb_element0.arb_element0 */
|
|
|
|
|
#define TSEM_REG_ARB_ELEMENT1 0x180024
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 2. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.
|
|
|
|
|
Could not be equal to register ~tsem_registers_arb_element0.arb_element0
|
|
|
|
|
and ~tsem_registers_arb_element1.arb_element1 */
|
|
|
|
|
#define TSEM_REG_ARB_ELEMENT2 0x180028
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 3. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
|
|
|
|
|
not be equal to register ~tsem_registers_arb_element0.arb_element0 and
|
|
|
|
|
~tsem_registers_arb_element1.arb_element1 and
|
|
|
|
|
~tsem_registers_arb_element2.arb_element2 */
|
|
|
|
|
#define TSEM_REG_ARB_ELEMENT3 0x18002c
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 4. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.
|
|
|
|
|
Could not be equal to register ~tsem_registers_arb_element0.arb_element0
|
|
|
|
|
and ~tsem_registers_arb_element1.arb_element1 and
|
|
|
|
|
~tsem_registers_arb_element2.arb_element2 and
|
|
|
|
|
~tsem_registers_arb_element3.arb_element3 */
|
|
|
|
|
#define TSEM_REG_ARB_ELEMENT4 0x180030
|
|
|
|
|
#define TSEM_REG_ENABLE_IN 0x1800a4
|
|
|
|
|
#define TSEM_REG_ENABLE_OUT 0x1800a8
|
|
|
|
|
/* [RW 32] This address space contains all registers and memories that are
|
|
|
|
|
placed in SEM_FAST block. The SEM_FAST registers are described in
|
2008-06-24 11:27:52 +08:00
|
|
|
appendix B. In order to access the sem_fast registers the base address
|
|
|
|
|
~fast_memory.fast_memory should be added to eachsem_fast register offset. */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define TSEM_REG_FAST_MEMORY 0x1a0000
|
|
|
|
|
/* [RW 1] Disables input messages from FIC0 May be updated during run_time
|
|
|
|
|
by the microcode */
|
|
|
|
|
#define TSEM_REG_FIC0_DISABLE 0x180224
|
|
|
|
|
/* [RW 1] Disables input messages from FIC1 May be updated during run_time
|
|
|
|
|
by the microcode */
|
|
|
|
|
#define TSEM_REG_FIC1_DISABLE 0x180234
|
|
|
|
|
/* [RW 15] Interrupt table Read and write access to it is not possible in
|
|
|
|
|
the middle of the work */
|
|
|
|
|
#define TSEM_REG_INT_TABLE 0x180400
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that entered through
|
|
|
|
|
FIC0 */
|
|
|
|
|
#define TSEM_REG_MSG_NUM_FIC0 0x180000
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that entered through
|
|
|
|
|
FIC1 */
|
|
|
|
|
#define TSEM_REG_MSG_NUM_FIC1 0x180004
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC0 */
|
|
|
|
|
#define TSEM_REG_MSG_NUM_FOC0 0x180008
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC1 */
|
|
|
|
|
#define TSEM_REG_MSG_NUM_FOC1 0x18000c
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC2 */
|
|
|
|
|
#define TSEM_REG_MSG_NUM_FOC2 0x180010
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC3 */
|
|
|
|
|
#define TSEM_REG_MSG_NUM_FOC3 0x180014
|
|
|
|
|
/* [RW 1] Disables input messages from the passive buffer May be updated
|
|
|
|
|
during run_time by the microcode */
|
|
|
|
|
#define TSEM_REG_PAS_DISABLE 0x18024c
|
|
|
|
|
/* [WB 128] Debug only. Passive buffer memory */
|
|
|
|
|
#define TSEM_REG_PASSIVE_BUFFER 0x181000
|
|
|
|
|
/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
|
|
|
|
|
#define TSEM_REG_PRAM 0x1c0000
|
|
|
|
|
/* [R 8] Valid sleeping threads indication have bit per thread */
|
|
|
|
|
#define TSEM_REG_SLEEP_THREADS_VALID 0x18026c
|
|
|
|
|
/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
|
|
|
|
|
#define TSEM_REG_SLOW_EXT_STORE_EMPTY 0x1802a0
|
|
|
|
|
/* [RW 8] List of free threads . There is a bit per thread. */
|
|
|
|
|
#define TSEM_REG_THREADS_LIST 0x1802e4
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 0 */
|
|
|
|
|
#define TSEM_REG_TS_0_AS 0x180038
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 10 */
|
|
|
|
|
#define TSEM_REG_TS_10_AS 0x180060
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 11 */
|
|
|
|
|
#define TSEM_REG_TS_11_AS 0x180064
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 12 */
|
|
|
|
|
#define TSEM_REG_TS_12_AS 0x180068
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 13 */
|
|
|
|
|
#define TSEM_REG_TS_13_AS 0x18006c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 14 */
|
|
|
|
|
#define TSEM_REG_TS_14_AS 0x180070
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 15 */
|
|
|
|
|
#define TSEM_REG_TS_15_AS 0x180074
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 16 */
|
|
|
|
|
#define TSEM_REG_TS_16_AS 0x180078
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 17 */
|
|
|
|
|
#define TSEM_REG_TS_17_AS 0x18007c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 18 */
|
|
|
|
|
#define TSEM_REG_TS_18_AS 0x180080
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 1 */
|
|
|
|
|
#define TSEM_REG_TS_1_AS 0x18003c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 2 */
|
|
|
|
|
#define TSEM_REG_TS_2_AS 0x180040
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 3 */
|
|
|
|
|
#define TSEM_REG_TS_3_AS 0x180044
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 4 */
|
|
|
|
|
#define TSEM_REG_TS_4_AS 0x180048
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 5 */
|
|
|
|
|
#define TSEM_REG_TS_5_AS 0x18004c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 6 */
|
|
|
|
|
#define TSEM_REG_TS_6_AS 0x180050
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 7 */
|
|
|
|
|
#define TSEM_REG_TS_7_AS 0x180054
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 8 */
|
|
|
|
|
#define TSEM_REG_TS_8_AS 0x180058
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 9 */
|
|
|
|
|
#define TSEM_REG_TS_9_AS 0x18005c
|
|
|
|
|
/* [RW 32] Interrupt mask register #0 read/write */
|
|
|
|
|
#define TSEM_REG_TSEM_INT_MASK_0 0x180100
|
|
|
|
|
#define TSEM_REG_TSEM_INT_MASK_1 0x180110
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 32] Interrupt register #0 read */
|
|
|
|
|
#define TSEM_REG_TSEM_INT_STS_0 0x1800f4
|
|
|
|
|
#define TSEM_REG_TSEM_INT_STS_1 0x180104
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] Parity mask register #0 read/write */
|
|
|
|
|
#define TSEM_REG_TSEM_PRTY_MASK_0 0x180120
|
|
|
|
|
#define TSEM_REG_TSEM_PRTY_MASK_1 0x180130
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 32] Parity register #0 read */
|
|
|
|
|
#define TSEM_REG_TSEM_PRTY_STS_0 0x180114
|
|
|
|
|
#define TSEM_REG_TSEM_PRTY_STS_1 0x180124
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
|
|
|
|
|
* VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
|
|
|
|
|
#define TSEM_REG_VFPF_ERR_NUM 0x180380
|
|
|
|
|
/* [RW 32] Indirect access to AG context with 32-bits granularity. The bits
|
|
|
|
|
* [10:8] of the address should be the offset within the accessed LCID
|
|
|
|
|
* context; the bits [7:0] are the accessed LCID.Example: to write to REG10
|
|
|
|
|
* LCID100. The RBC address should be 12'ha64. */
|
|
|
|
|
#define UCM_REG_AG_CTX 0xe2000
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 5] Used to read the XX protection CAM occupancy counter. */
|
|
|
|
|
#define UCM_REG_CAM_OCCUP 0xe0170
|
|
|
|
|
/* [RW 1] CDU AG read Interface enable. If 0 - the request input is
|
|
|
|
|
disregarded; valid output is deasserted; all other signals are treated as
|
|
|
|
|
usual; if 1 - normal activity. */
|
|
|
|
|
#define UCM_REG_CDU_AG_RD_IFEN 0xe0038
|
|
|
|
|
/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
|
|
|
|
|
are disregarded; all other signals are treated as usual; if 1 - normal
|
|
|
|
|
activity. */
|
|
|
|
|
#define UCM_REG_CDU_AG_WR_IFEN 0xe0034
|
|
|
|
|
/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
|
|
|
|
|
disregarded; valid output is deasserted; all other signals are treated as
|
|
|
|
|
usual; if 1 - normal activity. */
|
|
|
|
|
#define UCM_REG_CDU_SM_RD_IFEN 0xe0040
|
|
|
|
|
/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
|
|
|
|
|
input is disregarded; all other signals are treated as usual; if 1 -
|
|
|
|
|
normal activity. */
|
|
|
|
|
#define UCM_REG_CDU_SM_WR_IFEN 0xe003c
|
|
|
|
|
/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
|
|
|
|
|
the initial credit value; read returns the current value of the credit
|
|
|
|
|
counter. Must be initialized to 1 at start-up. */
|
|
|
|
|
#define UCM_REG_CFC_INIT_CRD 0xe0204
|
|
|
|
|
/* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define UCM_REG_CP_WEIGHT 0xe00c4
|
|
|
|
|
/* [RW 1] Input csem Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define UCM_REG_CSEM_IFEN 0xe0028
|
|
|
|
|
/* [RC 1] Set when the message length mismatch (relative to last indication)
|
|
|
|
|
at the csem interface is detected. */
|
|
|
|
|
#define UCM_REG_CSEM_LENGTH_MIS 0xe0160
|
|
|
|
|
/* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define UCM_REG_CSEM_WEIGHT 0xe00b8
|
|
|
|
|
/* [RW 1] Input dorq Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define UCM_REG_DORQ_IFEN 0xe0030
|
|
|
|
|
/* [RC 1] Set when the message length mismatch (relative to last indication)
|
|
|
|
|
at the dorq interface is detected. */
|
|
|
|
|
#define UCM_REG_DORQ_LENGTH_MIS 0xe0168
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define UCM_REG_DORQ_WEIGHT 0xe00c0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 8] The Event ID in case ErrorFlg input message bit is set. */
|
|
|
|
|
#define UCM_REG_ERR_EVNT_ID 0xe00a4
|
|
|
|
|
/* [RW 28] The CM erroneous header for QM and Timers formatting. */
|
|
|
|
|
#define UCM_REG_ERR_UCM_HDR 0xe00a0
|
|
|
|
|
/* [RW 8] The Event ID for Timers expiration. */
|
|
|
|
|
#define UCM_REG_EXPR_EVNT_ID 0xe00a8
|
|
|
|
|
/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
|
|
|
|
|
writes the initial credit value; read returns the current value of the
|
|
|
|
|
credit counter. Must be initialized to 64 at start-up. */
|
|
|
|
|
#define UCM_REG_FIC0_INIT_CRD 0xe020c
|
|
|
|
|
/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
|
|
|
|
|
writes the initial credit value; read returns the current value of the
|
|
|
|
|
credit counter. Must be initialized to 64 at start-up. */
|
|
|
|
|
#define UCM_REG_FIC1_INIT_CRD 0xe0210
|
|
|
|
|
/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
|
|
|
|
|
- strict priority defined by ~ucm_registers_gr_ag_pr.gr_ag_pr;
|
|
|
|
|
~ucm_registers_gr_ld0_pr.gr_ld0_pr and
|
|
|
|
|
~ucm_registers_gr_ld1_pr.gr_ld1_pr. */
|
|
|
|
|
#define UCM_REG_GR_ARB_TYPE 0xe0144
|
|
|
|
|
/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
|
|
|
|
|
highest priority is 3. It is supposed that the Store channel group is
|
|
|
|
|
compliment to the others. */
|
|
|
|
|
#define UCM_REG_GR_LD0_PR 0xe014c
|
|
|
|
|
/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
|
|
|
|
|
highest priority is 3. It is supposed that the Store channel group is
|
|
|
|
|
compliment to the others. */
|
|
|
|
|
#define UCM_REG_GR_LD1_PR 0xe0150
|
|
|
|
|
/* [RW 2] The queue index for invalidate counter flag decision. */
|
|
|
|
|
#define UCM_REG_INV_CFLG_Q 0xe00e4
|
|
|
|
|
/* [RW 5] The number of double REG-pairs; loaded from the STORM context and
|
|
|
|
|
sent to STORM; for a specific connection type. the double REG-pairs are
|
|
|
|
|
used in order to align to STORM context row size of 128 bits. The offset
|
|
|
|
|
of these data in the STORM context is always 0. Index _i stands for the
|
|
|
|
|
connection type (one of 16). */
|
|
|
|
|
#define UCM_REG_N_SM_CTX_LD_0 0xe0054
|
|
|
|
|
#define UCM_REG_N_SM_CTX_LD_1 0xe0058
|
|
|
|
|
#define UCM_REG_N_SM_CTX_LD_2 0xe005c
|
|
|
|
|
#define UCM_REG_N_SM_CTX_LD_3 0xe0060
|
|
|
|
|
#define UCM_REG_N_SM_CTX_LD_4 0xe0064
|
2008-06-24 11:27:52 +08:00
|
|
|
#define UCM_REG_N_SM_CTX_LD_5 0xe0068
|
2007-11-16 02:09:02 +08:00
|
|
|
#define UCM_REG_PHYS_QNUM0_0 0xe0110
|
|
|
|
|
#define UCM_REG_PHYS_QNUM0_1 0xe0114
|
|
|
|
|
#define UCM_REG_PHYS_QNUM1_0 0xe0118
|
|
|
|
|
#define UCM_REG_PHYS_QNUM1_1 0xe011c
|
2008-06-24 11:27:52 +08:00
|
|
|
#define UCM_REG_PHYS_QNUM2_0 0xe0120
|
|
|
|
|
#define UCM_REG_PHYS_QNUM2_1 0xe0124
|
|
|
|
|
#define UCM_REG_PHYS_QNUM3_0 0xe0128
|
|
|
|
|
#define UCM_REG_PHYS_QNUM3_1 0xe012c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 8] The Event ID for Timers formatting in case of stop done. */
|
|
|
|
|
#define UCM_REG_STOP_EVNT_ID 0xe00ac
|
|
|
|
|
/* [RC 1] Set when the message length mismatch (relative to last indication)
|
|
|
|
|
at the STORM interface is detected. */
|
|
|
|
|
#define UCM_REG_STORM_LENGTH_MIS 0xe0154
|
|
|
|
|
/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define UCM_REG_STORM_UCM_IFEN 0xe0010
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define UCM_REG_STORM_WEIGHT 0xe00b0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 4] Timers output initial credit. Max credit available - 15.Write
|
|
|
|
|
writes the initial credit value; read returns the current value of the
|
|
|
|
|
credit counter. Must be initialized to 4 at start-up. */
|
|
|
|
|
#define UCM_REG_TM_INIT_CRD 0xe021c
|
|
|
|
|
/* [RW 28] The CM header for Timers expiration command. */
|
|
|
|
|
#define UCM_REG_TM_UCM_HDR 0xe009c
|
|
|
|
|
/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define UCM_REG_TM_UCM_IFEN 0xe001c
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define UCM_REG_TM_WEIGHT 0xe00d4
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Input tsem Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define UCM_REG_TSEM_IFEN 0xe0024
|
|
|
|
|
/* [RC 1] Set when the message length mismatch (relative to last indication)
|
|
|
|
|
at the tsem interface is detected. */
|
|
|
|
|
#define UCM_REG_TSEM_LENGTH_MIS 0xe015c
|
|
|
|
|
/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define UCM_REG_TSEM_WEIGHT 0xe00b4
|
|
|
|
|
/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define UCM_REG_UCM_CFC_IFEN 0xe0044
|
|
|
|
|
/* [RW 11] Interrupt mask register #0 read/write */
|
|
|
|
|
#define UCM_REG_UCM_INT_MASK 0xe01d4
|
|
|
|
|
/* [R 11] Interrupt register #0 read */
|
|
|
|
|
#define UCM_REG_UCM_INT_STS 0xe01c8
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 27] Parity register #0 read */
|
|
|
|
|
#define UCM_REG_UCM_PRTY_STS 0xe01d8
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS
|
|
|
|
|
REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
|
|
|
|
|
Is used to determine the number of the AG context REG-pairs written back;
|
|
|
|
|
when the Reg1WbFlg isn't set. */
|
|
|
|
|
#define UCM_REG_UCM_REG0_SZ 0xe00dc
|
|
|
|
|
/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
|
|
|
|
|
disregarded; valid is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define UCM_REG_UCM_STORM0_IFEN 0xe0004
|
|
|
|
|
/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
|
|
|
|
|
disregarded; valid is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define UCM_REG_UCM_STORM1_IFEN 0xe0008
|
|
|
|
|
/* [RW 1] CM - Timers Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define UCM_REG_UCM_TM_IFEN 0xe0020
|
|
|
|
|
/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
|
|
|
|
|
disregarded; valid is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define UCM_REG_UCM_UQM_IFEN 0xe000c
|
|
|
|
|
/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
|
|
|
|
|
#define UCM_REG_UCM_UQM_USE_Q 0xe00d8
|
|
|
|
|
/* [RW 6] QM output initial credit. Max credit available - 32.Write writes
|
|
|
|
|
the initial credit value; read returns the current value of the credit
|
|
|
|
|
counter. Must be initialized to 32 at start-up. */
|
|
|
|
|
#define UCM_REG_UQM_INIT_CRD 0xe0220
|
|
|
|
|
/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
|
|
|
|
|
stands for weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define UCM_REG_UQM_P_WEIGHT 0xe00cc
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
|
|
|
|
|
stands for weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define UCM_REG_UQM_S_WEIGHT 0xe00d0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 28] The CM header value for QM request (primary). */
|
|
|
|
|
#define UCM_REG_UQM_UCM_HDR_P 0xe0094
|
|
|
|
|
/* [RW 28] The CM header value for QM request (secondary). */
|
|
|
|
|
#define UCM_REG_UQM_UCM_HDR_S 0xe0098
|
|
|
|
|
/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define UCM_REG_UQM_UCM_IFEN 0xe0014
|
|
|
|
|
/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define UCM_REG_USDM_IFEN 0xe0018
|
|
|
|
|
/* [RC 1] Set when the message length mismatch (relative to last indication)
|
|
|
|
|
at the SDM interface is detected. */
|
|
|
|
|
#define UCM_REG_USDM_LENGTH_MIS 0xe0158
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define UCM_REG_USDM_WEIGHT 0xe00c8
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Input xsem Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define UCM_REG_XSEM_IFEN 0xe002c
|
|
|
|
|
/* [RC 1] Set when the message length mismatch (relative to last indication)
|
|
|
|
|
at the xsem interface isdetected. */
|
|
|
|
|
#define UCM_REG_XSEM_LENGTH_MIS 0xe0164
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define UCM_REG_XSEM_WEIGHT 0xe00bc
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 20] Indirect access to the descriptor table of the XX protection
|
|
|
|
|
mechanism. The fields are:[5:0] - message length; 14:6] - message
|
|
|
|
|
pointer; 19:15] - next pointer. */
|
|
|
|
|
#define UCM_REG_XX_DESCR_TABLE 0xe0280
|
2008-06-24 11:27:52 +08:00
|
|
|
#define UCM_REG_XX_DESCR_TABLE_SIZE 32
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 6] Use to read the XX protection Free counter. */
|
|
|
|
|
#define UCM_REG_XX_FREE 0xe016c
|
|
|
|
|
/* [RW 6] Initial value for the credit counter; responsible for fulfilling
|
|
|
|
|
of the Input Stage XX protection buffer by the XX protection pending
|
|
|
|
|
messages. Write writes the initial credit value; read returns the current
|
|
|
|
|
value of the credit counter. Must be initialized to 12 at start-up. */
|
|
|
|
|
#define UCM_REG_XX_INIT_CRD 0xe0224
|
|
|
|
|
/* [RW 6] The maximum number of pending messages; which may be stored in XX
|
|
|
|
|
protection. ~ucm_registers_xx_free.xx_free read on read. */
|
|
|
|
|
#define UCM_REG_XX_MSG_NUM 0xe0228
|
|
|
|
|
/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
|
|
|
|
|
#define UCM_REG_XX_OVFL_EVNT_ID 0xe004c
|
|
|
|
|
/* [RW 16] Indirect access to the XX table of the XX protection mechanism.
|
|
|
|
|
The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] -
|
|
|
|
|
header pointer. */
|
|
|
|
|
#define UCM_REG_XX_TABLE 0xe0300
|
|
|
|
|
/* [RW 8] The event id for aggregated interrupt 0 */
|
|
|
|
|
#define USDM_REG_AGG_INT_EVENT_0 0xc4038
|
|
|
|
|
#define USDM_REG_AGG_INT_EVENT_1 0xc403c
|
2008-06-24 11:27:52 +08:00
|
|
|
#define USDM_REG_AGG_INT_EVENT_2 0xc4040
|
|
|
|
|
#define USDM_REG_AGG_INT_EVENT_4 0xc4048
|
2009-02-16 15:24:08 +08:00
|
|
|
#define USDM_REG_AGG_INT_EVENT_5 0xc404c
|
2009-08-13 13:53:28 +08:00
|
|
|
#define USDM_REG_AGG_INT_EVENT_6 0xc4050
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
|
|
|
|
|
or auto-mask-mode (1) */
|
|
|
|
|
#define USDM_REG_AGG_INT_MODE_0 0xc41b8
|
|
|
|
|
#define USDM_REG_AGG_INT_MODE_1 0xc41bc
|
2009-02-16 15:24:08 +08:00
|
|
|
#define USDM_REG_AGG_INT_MODE_4 0xc41c8
|
|
|
|
|
#define USDM_REG_AGG_INT_MODE_5 0xc41cc
|
2009-08-13 13:53:28 +08:00
|
|
|
#define USDM_REG_AGG_INT_MODE_6 0xc41d0
|
|
|
|
|
/* [RW 1] The T bit for aggregated interrupt 5 */
|
|
|
|
|
#define USDM_REG_AGG_INT_T_5 0xc40cc
|
|
|
|
|
#define USDM_REG_AGG_INT_T_6 0xc40d0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
|
|
|
|
|
#define USDM_REG_CFC_RSP_START_ADDR 0xc4008
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #0 */
|
|
|
|
|
#define USDM_REG_CMP_COUNTER_MAX0 0xc401c
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #1 */
|
|
|
|
|
#define USDM_REG_CMP_COUNTER_MAX1 0xc4020
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #2 */
|
|
|
|
|
#define USDM_REG_CMP_COUNTER_MAX2 0xc4024
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #3 */
|
|
|
|
|
#define USDM_REG_CMP_COUNTER_MAX3 0xc4028
|
|
|
|
|
/* [RW 13] The start address in the internal RAM for the completion
|
|
|
|
|
counters. */
|
|
|
|
|
#define USDM_REG_CMP_COUNTER_START_ADDR 0xc400c
|
|
|
|
|
#define USDM_REG_ENABLE_IN1 0xc4238
|
|
|
|
|
#define USDM_REG_ENABLE_IN2 0xc423c
|
|
|
|
|
#define USDM_REG_ENABLE_OUT1 0xc4240
|
|
|
|
|
#define USDM_REG_ENABLE_OUT2 0xc4244
|
|
|
|
|
/* [RW 4] The initial number of messages that can be sent to the pxp control
|
|
|
|
|
interface without receiving any ACK. */
|
|
|
|
|
#define USDM_REG_INIT_CREDIT_PXP_CTRL 0xc44c0
|
|
|
|
|
/* [ST 32] The number of ACK after placement messages received */
|
|
|
|
|
#define USDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc4280
|
|
|
|
|
/* [ST 32] The number of packet end messages received from the parser */
|
|
|
|
|
#define USDM_REG_NUM_OF_PKT_END_MSG 0xc4278
|
|
|
|
|
/* [ST 32] The number of requests received from the pxp async if */
|
|
|
|
|
#define USDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc427c
|
|
|
|
|
/* [ST 32] The number of commands received in queue 0 */
|
|
|
|
|
#define USDM_REG_NUM_OF_Q0_CMD 0xc4248
|
|
|
|
|
/* [ST 32] The number of commands received in queue 10 */
|
|
|
|
|
#define USDM_REG_NUM_OF_Q10_CMD 0xc4270
|
|
|
|
|
/* [ST 32] The number of commands received in queue 11 */
|
|
|
|
|
#define USDM_REG_NUM_OF_Q11_CMD 0xc4274
|
|
|
|
|
/* [ST 32] The number of commands received in queue 1 */
|
|
|
|
|
#define USDM_REG_NUM_OF_Q1_CMD 0xc424c
|
|
|
|
|
/* [ST 32] The number of commands received in queue 2 */
|
|
|
|
|
#define USDM_REG_NUM_OF_Q2_CMD 0xc4250
|
|
|
|
|
/* [ST 32] The number of commands received in queue 3 */
|
|
|
|
|
#define USDM_REG_NUM_OF_Q3_CMD 0xc4254
|
|
|
|
|
/* [ST 32] The number of commands received in queue 4 */
|
|
|
|
|
#define USDM_REG_NUM_OF_Q4_CMD 0xc4258
|
|
|
|
|
/* [ST 32] The number of commands received in queue 5 */
|
|
|
|
|
#define USDM_REG_NUM_OF_Q5_CMD 0xc425c
|
|
|
|
|
/* [ST 32] The number of commands received in queue 6 */
|
|
|
|
|
#define USDM_REG_NUM_OF_Q6_CMD 0xc4260
|
|
|
|
|
/* [ST 32] The number of commands received in queue 7 */
|
|
|
|
|
#define USDM_REG_NUM_OF_Q7_CMD 0xc4264
|
|
|
|
|
/* [ST 32] The number of commands received in queue 8 */
|
|
|
|
|
#define USDM_REG_NUM_OF_Q8_CMD 0xc4268
|
|
|
|
|
/* [ST 32] The number of commands received in queue 9 */
|
|
|
|
|
#define USDM_REG_NUM_OF_Q9_CMD 0xc426c
|
|
|
|
|
/* [RW 13] The start address in the internal RAM for the packet end message */
|
|
|
|
|
#define USDM_REG_PCK_END_MSG_START_ADDR 0xc4014
|
|
|
|
|
/* [RW 13] The start address in the internal RAM for queue counters */
|
|
|
|
|
#define USDM_REG_Q_COUNTER_START_ADDR 0xc4010
|
|
|
|
|
/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
|
|
|
|
|
#define USDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc4550
|
|
|
|
|
/* [R 1] parser fifo empty in sdm_sync block */
|
|
|
|
|
#define USDM_REG_SYNC_PARSER_EMPTY 0xc4558
|
|
|
|
|
/* [R 1] parser serial fifo empty in sdm_sync block */
|
|
|
|
|
#define USDM_REG_SYNC_SYNC_EMPTY 0xc4560
|
|
|
|
|
/* [RW 32] Tick for timer counter. Applicable only when
|
|
|
|
|
~usdm_registers_timer_tick_enable.timer_tick_enable =1 */
|
|
|
|
|
#define USDM_REG_TIMER_TICK 0xc4000
|
|
|
|
|
/* [RW 32] Interrupt mask register #0 read/write */
|
|
|
|
|
#define USDM_REG_USDM_INT_MASK_0 0xc42a0
|
|
|
|
|
#define USDM_REG_USDM_INT_MASK_1 0xc42b0
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 32] Interrupt register #0 read */
|
|
|
|
|
#define USDM_REG_USDM_INT_STS_0 0xc4294
|
|
|
|
|
#define USDM_REG_USDM_INT_STS_1 0xc42a4
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 11] Parity mask register #0 read/write */
|
|
|
|
|
#define USDM_REG_USDM_PRTY_MASK 0xc42c0
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 11] Parity register #0 read */
|
|
|
|
|
#define USDM_REG_USDM_PRTY_STS 0xc42b4
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 5] The number of time_slots in the arbitration cycle */
|
|
|
|
|
#define USEM_REG_ARB_CYCLE_SIZE 0x300034
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 0. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2 */
|
|
|
|
|
#define USEM_REG_ARB_ELEMENT0 0x300020
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 1. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.
|
|
|
|
|
Could not be equal to register ~usem_registers_arb_element0.arb_element0 */
|
|
|
|
|
#define USEM_REG_ARB_ELEMENT1 0x300024
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 2. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.
|
|
|
|
|
Could not be equal to register ~usem_registers_arb_element0.arb_element0
|
|
|
|
|
and ~usem_registers_arb_element1.arb_element1 */
|
|
|
|
|
#define USEM_REG_ARB_ELEMENT2 0x300028
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 3. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
|
|
|
|
|
not be equal to register ~usem_registers_arb_element0.arb_element0 and
|
|
|
|
|
~usem_registers_arb_element1.arb_element1 and
|
|
|
|
|
~usem_registers_arb_element2.arb_element2 */
|
|
|
|
|
#define USEM_REG_ARB_ELEMENT3 0x30002c
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 4. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.
|
|
|
|
|
Could not be equal to register ~usem_registers_arb_element0.arb_element0
|
|
|
|
|
and ~usem_registers_arb_element1.arb_element1 and
|
|
|
|
|
~usem_registers_arb_element2.arb_element2 and
|
|
|
|
|
~usem_registers_arb_element3.arb_element3 */
|
|
|
|
|
#define USEM_REG_ARB_ELEMENT4 0x300030
|
|
|
|
|
#define USEM_REG_ENABLE_IN 0x3000a4
|
|
|
|
|
#define USEM_REG_ENABLE_OUT 0x3000a8
|
|
|
|
|
/* [RW 32] This address space contains all registers and memories that are
|
|
|
|
|
placed in SEM_FAST block. The SEM_FAST registers are described in
|
2008-06-24 11:27:52 +08:00
|
|
|
appendix B. In order to access the sem_fast registers the base address
|
|
|
|
|
~fast_memory.fast_memory should be added to eachsem_fast register offset. */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define USEM_REG_FAST_MEMORY 0x320000
|
|
|
|
|
/* [RW 1] Disables input messages from FIC0 May be updated during run_time
|
|
|
|
|
by the microcode */
|
|
|
|
|
#define USEM_REG_FIC0_DISABLE 0x300224
|
|
|
|
|
/* [RW 1] Disables input messages from FIC1 May be updated during run_time
|
|
|
|
|
by the microcode */
|
|
|
|
|
#define USEM_REG_FIC1_DISABLE 0x300234
|
|
|
|
|
/* [RW 15] Interrupt table Read and write access to it is not possible in
|
|
|
|
|
the middle of the work */
|
|
|
|
|
#define USEM_REG_INT_TABLE 0x300400
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that entered through
|
|
|
|
|
FIC0 */
|
|
|
|
|
#define USEM_REG_MSG_NUM_FIC0 0x300000
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that entered through
|
|
|
|
|
FIC1 */
|
|
|
|
|
#define USEM_REG_MSG_NUM_FIC1 0x300004
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC0 */
|
|
|
|
|
#define USEM_REG_MSG_NUM_FOC0 0x300008
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC1 */
|
|
|
|
|
#define USEM_REG_MSG_NUM_FOC1 0x30000c
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC2 */
|
|
|
|
|
#define USEM_REG_MSG_NUM_FOC2 0x300010
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC3 */
|
|
|
|
|
#define USEM_REG_MSG_NUM_FOC3 0x300014
|
|
|
|
|
/* [RW 1] Disables input messages from the passive buffer May be updated
|
|
|
|
|
during run_time by the microcode */
|
|
|
|
|
#define USEM_REG_PAS_DISABLE 0x30024c
|
|
|
|
|
/* [WB 128] Debug only. Passive buffer memory */
|
|
|
|
|
#define USEM_REG_PASSIVE_BUFFER 0x302000
|
|
|
|
|
/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
|
|
|
|
|
#define USEM_REG_PRAM 0x340000
|
|
|
|
|
/* [R 16] Valid sleeping threads indication have bit per thread */
|
|
|
|
|
#define USEM_REG_SLEEP_THREADS_VALID 0x30026c
|
|
|
|
|
/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
|
|
|
|
|
#define USEM_REG_SLOW_EXT_STORE_EMPTY 0x3002a0
|
|
|
|
|
/* [RW 16] List of free threads . There is a bit per thread. */
|
|
|
|
|
#define USEM_REG_THREADS_LIST 0x3002e4
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 0 */
|
|
|
|
|
#define USEM_REG_TS_0_AS 0x300038
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 10 */
|
|
|
|
|
#define USEM_REG_TS_10_AS 0x300060
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 11 */
|
|
|
|
|
#define USEM_REG_TS_11_AS 0x300064
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 12 */
|
|
|
|
|
#define USEM_REG_TS_12_AS 0x300068
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 13 */
|
|
|
|
|
#define USEM_REG_TS_13_AS 0x30006c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 14 */
|
|
|
|
|
#define USEM_REG_TS_14_AS 0x300070
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 15 */
|
|
|
|
|
#define USEM_REG_TS_15_AS 0x300074
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 16 */
|
|
|
|
|
#define USEM_REG_TS_16_AS 0x300078
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 17 */
|
|
|
|
|
#define USEM_REG_TS_17_AS 0x30007c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 18 */
|
|
|
|
|
#define USEM_REG_TS_18_AS 0x300080
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 1 */
|
|
|
|
|
#define USEM_REG_TS_1_AS 0x30003c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 2 */
|
|
|
|
|
#define USEM_REG_TS_2_AS 0x300040
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 3 */
|
|
|
|
|
#define USEM_REG_TS_3_AS 0x300044
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 4 */
|
|
|
|
|
#define USEM_REG_TS_4_AS 0x300048
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 5 */
|
|
|
|
|
#define USEM_REG_TS_5_AS 0x30004c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 6 */
|
|
|
|
|
#define USEM_REG_TS_6_AS 0x300050
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 7 */
|
|
|
|
|
#define USEM_REG_TS_7_AS 0x300054
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 8 */
|
|
|
|
|
#define USEM_REG_TS_8_AS 0x300058
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 9 */
|
|
|
|
|
#define USEM_REG_TS_9_AS 0x30005c
|
|
|
|
|
/* [RW 32] Interrupt mask register #0 read/write */
|
|
|
|
|
#define USEM_REG_USEM_INT_MASK_0 0x300110
|
|
|
|
|
#define USEM_REG_USEM_INT_MASK_1 0x300120
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 32] Interrupt register #0 read */
|
|
|
|
|
#define USEM_REG_USEM_INT_STS_0 0x300104
|
|
|
|
|
#define USEM_REG_USEM_INT_STS_1 0x300114
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] Parity mask register #0 read/write */
|
|
|
|
|
#define USEM_REG_USEM_PRTY_MASK_0 0x300130
|
|
|
|
|
#define USEM_REG_USEM_PRTY_MASK_1 0x300140
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 32] Parity register #0 read */
|
|
|
|
|
#define USEM_REG_USEM_PRTY_STS_0 0x300124
|
|
|
|
|
#define USEM_REG_USEM_PRTY_STS_1 0x300134
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
|
|
|
|
|
* VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
|
|
|
|
|
#define USEM_REG_VFPF_ERR_NUM 0x300380
|
|
|
|
|
#define VFC_MEMORIES_RST_REG_CAM_RST (0x1<<0)
|
|
|
|
|
#define VFC_MEMORIES_RST_REG_RAM_RST (0x1<<1)
|
|
|
|
|
#define VFC_REG_MEMORIES_RST 0x1943c
|
|
|
|
|
/* [RW 32] Indirect access to AG context with 32-bits granularity. The bits
|
|
|
|
|
* [12:8] of the address should be the offset within the accessed LCID
|
|
|
|
|
* context; the bits [7:0] are the accessed LCID.Example: to write to REG10
|
|
|
|
|
* LCID100. The RBC address should be 13'ha64. */
|
|
|
|
|
#define XCM_REG_AG_CTX 0x28000
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 2] The queue index for registration on Aux1 counter flag. */
|
|
|
|
|
#define XCM_REG_AUX1_Q 0x20134
|
|
|
|
|
/* [RW 2] Per each decision rule the queue index to register to. */
|
|
|
|
|
#define XCM_REG_AUX_CNT_FLG_Q_19 0x201b0
|
|
|
|
|
/* [R 5] Used to read the XX protection CAM occupancy counter. */
|
|
|
|
|
#define XCM_REG_CAM_OCCUP 0x20244
|
|
|
|
|
/* [RW 1] CDU AG read Interface enable. If 0 - the request input is
|
|
|
|
|
disregarded; valid output is deasserted; all other signals are treated as
|
|
|
|
|
usual; if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_CDU_AG_RD_IFEN 0x20044
|
|
|
|
|
/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
|
|
|
|
|
are disregarded; all other signals are treated as usual; if 1 - normal
|
|
|
|
|
activity. */
|
|
|
|
|
#define XCM_REG_CDU_AG_WR_IFEN 0x20040
|
|
|
|
|
/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
|
|
|
|
|
disregarded; valid output is deasserted; all other signals are treated as
|
|
|
|
|
usual; if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_CDU_SM_RD_IFEN 0x2004c
|
|
|
|
|
/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
|
|
|
|
|
input is disregarded; all other signals are treated as usual; if 1 -
|
|
|
|
|
normal activity. */
|
|
|
|
|
#define XCM_REG_CDU_SM_WR_IFEN 0x20048
|
|
|
|
|
/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
|
|
|
|
|
the initial credit value; read returns the current value of the credit
|
|
|
|
|
counter. Must be initialized to 1 at start-up. */
|
|
|
|
|
#define XCM_REG_CFC_INIT_CRD 0x20404
|
|
|
|
|
/* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define XCM_REG_CP_WEIGHT 0x200dc
|
|
|
|
|
/* [RW 1] Input csem Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_CSEM_IFEN 0x20028
|
|
|
|
|
/* [RC 1] Set at message length mismatch (relative to last indication) at
|
|
|
|
|
the csem interface. */
|
|
|
|
|
#define XCM_REG_CSEM_LENGTH_MIS 0x20228
|
|
|
|
|
/* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define XCM_REG_CSEM_WEIGHT 0x200c4
|
|
|
|
|
/* [RW 1] Input dorq Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_DORQ_IFEN 0x20030
|
|
|
|
|
/* [RC 1] Set at message length mismatch (relative to last indication) at
|
|
|
|
|
the dorq interface. */
|
|
|
|
|
#define XCM_REG_DORQ_LENGTH_MIS 0x20230
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define XCM_REG_DORQ_WEIGHT 0x200cc
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 8] The Event ID in case the ErrorFlg input message bit is set. */
|
|
|
|
|
#define XCM_REG_ERR_EVNT_ID 0x200b0
|
|
|
|
|
/* [RW 28] The CM erroneous header for QM and Timers formatting. */
|
|
|
|
|
#define XCM_REG_ERR_XCM_HDR 0x200ac
|
|
|
|
|
/* [RW 8] The Event ID for Timers expiration. */
|
|
|
|
|
#define XCM_REG_EXPR_EVNT_ID 0x200b4
|
|
|
|
|
/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
|
|
|
|
|
writes the initial credit value; read returns the current value of the
|
|
|
|
|
credit counter. Must be initialized to 64 at start-up. */
|
|
|
|
|
#define XCM_REG_FIC0_INIT_CRD 0x2040c
|
|
|
|
|
/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
|
|
|
|
|
writes the initial credit value; read returns the current value of the
|
|
|
|
|
credit counter. Must be initialized to 64 at start-up. */
|
|
|
|
|
#define XCM_REG_FIC1_INIT_CRD 0x20410
|
|
|
|
|
#define XCM_REG_GLB_DEL_ACK_MAX_CNT_0 0x20118
|
|
|
|
|
#define XCM_REG_GLB_DEL_ACK_MAX_CNT_1 0x2011c
|
|
|
|
|
#define XCM_REG_GLB_DEL_ACK_TMR_VAL_0 0x20108
|
|
|
|
|
#define XCM_REG_GLB_DEL_ACK_TMR_VAL_1 0x2010c
|
|
|
|
|
/* [RW 1] Arbitratiojn between Input Arbiter groups: 0 - fair Round-Robin; 1
|
|
|
|
|
- strict priority defined by ~xcm_registers_gr_ag_pr.gr_ag_pr;
|
|
|
|
|
~xcm_registers_gr_ld0_pr.gr_ld0_pr and
|
|
|
|
|
~xcm_registers_gr_ld1_pr.gr_ld1_pr. */
|
|
|
|
|
#define XCM_REG_GR_ARB_TYPE 0x2020c
|
|
|
|
|
/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
|
|
|
|
|
highest priority is 3. It is supposed that the Channel group is the
|
|
|
|
|
compliment of the other 3 groups. */
|
|
|
|
|
#define XCM_REG_GR_LD0_PR 0x20214
|
|
|
|
|
/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
|
|
|
|
|
highest priority is 3. It is supposed that the Channel group is the
|
|
|
|
|
compliment of the other 3 groups. */
|
|
|
|
|
#define XCM_REG_GR_LD1_PR 0x20218
|
|
|
|
|
/* [RW 1] Input nig0 Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_NIG0_IFEN 0x20038
|
|
|
|
|
/* [RC 1] Set at message length mismatch (relative to last indication) at
|
|
|
|
|
the nig0 interface. */
|
|
|
|
|
#define XCM_REG_NIG0_LENGTH_MIS 0x20238
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the input nig0 in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define XCM_REG_NIG0_WEIGHT 0x200d4
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Input nig1 Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_NIG1_IFEN 0x2003c
|
|
|
|
|
/* [RC 1] Set at message length mismatch (relative to last indication) at
|
|
|
|
|
the nig1 interface. */
|
|
|
|
|
#define XCM_REG_NIG1_LENGTH_MIS 0x2023c
|
|
|
|
|
/* [RW 5] The number of double REG-pairs; loaded from the STORM context and
|
|
|
|
|
sent to STORM; for a specific connection type. The double REG-pairs are
|
|
|
|
|
used in order to align to STORM context row size of 128 bits. The offset
|
|
|
|
|
of these data in the STORM context is always 0. Index _i stands for the
|
|
|
|
|
connection type (one of 16). */
|
|
|
|
|
#define XCM_REG_N_SM_CTX_LD_0 0x20060
|
|
|
|
|
#define XCM_REG_N_SM_CTX_LD_1 0x20064
|
|
|
|
|
#define XCM_REG_N_SM_CTX_LD_2 0x20068
|
|
|
|
|
#define XCM_REG_N_SM_CTX_LD_3 0x2006c
|
|
|
|
|
#define XCM_REG_N_SM_CTX_LD_4 0x20070
|
2008-06-24 11:27:52 +08:00
|
|
|
#define XCM_REG_N_SM_CTX_LD_5 0x20074
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_PBF_IFEN 0x20034
|
|
|
|
|
/* [RC 1] Set at message length mismatch (relative to last indication) at
|
|
|
|
|
the pbf interface. */
|
|
|
|
|
#define XCM_REG_PBF_LENGTH_MIS 0x20234
|
|
|
|
|
/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define XCM_REG_PBF_WEIGHT 0x200d0
|
2008-06-24 11:27:52 +08:00
|
|
|
#define XCM_REG_PHYS_QNUM3_0 0x20100
|
|
|
|
|
#define XCM_REG_PHYS_QNUM3_1 0x20104
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 8] The Event ID for Timers formatting in case of stop done. */
|
|
|
|
|
#define XCM_REG_STOP_EVNT_ID 0x200b8
|
|
|
|
|
/* [RC 1] Set at message length mismatch (relative to last indication) at
|
|
|
|
|
the STORM interface. */
|
|
|
|
|
#define XCM_REG_STORM_LENGTH_MIS 0x2021c
|
|
|
|
|
/* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define XCM_REG_STORM_WEIGHT 0x200bc
|
|
|
|
|
/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_STORM_XCM_IFEN 0x20010
|
|
|
|
|
/* [RW 4] Timers output initial credit. Max credit available - 15.Write
|
|
|
|
|
writes the initial credit value; read returns the current value of the
|
|
|
|
|
credit counter. Must be initialized to 4 at start-up. */
|
|
|
|
|
#define XCM_REG_TM_INIT_CRD 0x2041c
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define XCM_REG_TM_WEIGHT 0x200ec
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 28] The CM header for Timers expiration command. */
|
|
|
|
|
#define XCM_REG_TM_XCM_HDR 0x200a8
|
|
|
|
|
/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_TM_XCM_IFEN 0x2001c
|
|
|
|
|
/* [RW 1] Input tsem Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_TSEM_IFEN 0x20024
|
|
|
|
|
/* [RC 1] Set at message length mismatch (relative to last indication) at
|
|
|
|
|
the tsem interface. */
|
|
|
|
|
#define XCM_REG_TSEM_LENGTH_MIS 0x20224
|
|
|
|
|
/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define XCM_REG_TSEM_WEIGHT 0x200c0
|
|
|
|
|
/* [RW 2] The queue index for registration on UNA greater NXT decision rule. */
|
|
|
|
|
#define XCM_REG_UNA_GT_NXT_Q 0x20120
|
|
|
|
|
/* [RW 1] Input usem Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_USEM_IFEN 0x2002c
|
|
|
|
|
/* [RC 1] Message length mismatch (relative to last indication) at the usem
|
|
|
|
|
interface. */
|
|
|
|
|
#define XCM_REG_USEM_LENGTH_MIS 0x2022c
|
|
|
|
|
/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define XCM_REG_USEM_WEIGHT 0x200c8
|
|
|
|
|
#define XCM_REG_WU_DA_CNT_CMD00 0x201d4
|
|
|
|
|
#define XCM_REG_WU_DA_CNT_CMD01 0x201d8
|
|
|
|
|
#define XCM_REG_WU_DA_CNT_CMD10 0x201dc
|
|
|
|
|
#define XCM_REG_WU_DA_CNT_CMD11 0x201e0
|
|
|
|
|
#define XCM_REG_WU_DA_CNT_UPD_VAL00 0x201e4
|
|
|
|
|
#define XCM_REG_WU_DA_CNT_UPD_VAL01 0x201e8
|
|
|
|
|
#define XCM_REG_WU_DA_CNT_UPD_VAL10 0x201ec
|
|
|
|
|
#define XCM_REG_WU_DA_CNT_UPD_VAL11 0x201f0
|
|
|
|
|
#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00 0x201c4
|
|
|
|
|
#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01 0x201c8
|
|
|
|
|
#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10 0x201cc
|
|
|
|
|
#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11 0x201d0
|
|
|
|
|
/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_XCM_CFC_IFEN 0x20050
|
|
|
|
|
/* [RW 14] Interrupt mask register #0 read/write */
|
|
|
|
|
#define XCM_REG_XCM_INT_MASK 0x202b4
|
|
|
|
|
/* [R 14] Interrupt register #0 read */
|
|
|
|
|
#define XCM_REG_XCM_INT_STS 0x202a8
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 30] Parity register #0 read */
|
|
|
|
|
#define XCM_REG_XCM_PRTY_STS 0x202b8
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 4] The size of AG context region 0 in REG-pairs. Designates the MS
|
|
|
|
|
REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
|
|
|
|
|
Is used to determine the number of the AG context REG-pairs written back;
|
|
|
|
|
when the Reg1WbFlg isn't set. */
|
|
|
|
|
#define XCM_REG_XCM_REG0_SZ 0x200f4
|
|
|
|
|
/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
|
|
|
|
|
disregarded; valid is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_XCM_STORM0_IFEN 0x20004
|
|
|
|
|
/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
|
|
|
|
|
disregarded; valid is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_XCM_STORM1_IFEN 0x20008
|
|
|
|
|
/* [RW 1] CM - Timers Interface enable. If 0 - the valid input is
|
|
|
|
|
disregarded; acknowledge output is deasserted; all other signals are
|
|
|
|
|
treated as usual; if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_XCM_TM_IFEN 0x20020
|
|
|
|
|
/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
|
|
|
|
|
disregarded; valid is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_XCM_XQM_IFEN 0x2000c
|
|
|
|
|
/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
|
|
|
|
|
#define XCM_REG_XCM_XQM_USE_Q 0x200f0
|
|
|
|
|
/* [RW 4] The value by which CFC updates the activity counter at QM bypass. */
|
|
|
|
|
#define XCM_REG_XQM_BYP_ACT_UPD 0x200fc
|
|
|
|
|
/* [RW 6] QM output initial credit. Max credit available - 32.Write writes
|
|
|
|
|
the initial credit value; read returns the current value of the credit
|
|
|
|
|
counter. Must be initialized to 32 at start-up. */
|
|
|
|
|
#define XCM_REG_XQM_INIT_CRD 0x20420
|
|
|
|
|
/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
|
|
|
|
|
stands for weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define XCM_REG_XQM_P_WEIGHT 0x200e4
|
2009-02-16 15:24:08 +08:00
|
|
|
/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
|
|
|
|
|
stands for weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define XCM_REG_XQM_S_WEIGHT 0x200e8
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 28] The CM header value for QM request (primary). */
|
|
|
|
|
#define XCM_REG_XQM_XCM_HDR_P 0x200a0
|
|
|
|
|
/* [RW 28] The CM header value for QM request (secondary). */
|
|
|
|
|
#define XCM_REG_XQM_XCM_HDR_S 0x200a4
|
|
|
|
|
/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_XQM_XCM_IFEN 0x20014
|
|
|
|
|
/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
|
|
|
|
|
acknowledge output is deasserted; all other signals are treated as usual;
|
|
|
|
|
if 1 - normal activity. */
|
|
|
|
|
#define XCM_REG_XSDM_IFEN 0x20018
|
|
|
|
|
/* [RC 1] Set at message length mismatch (relative to last indication) at
|
|
|
|
|
the SDM interface. */
|
|
|
|
|
#define XCM_REG_XSDM_LENGTH_MIS 0x20220
|
|
|
|
|
/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
|
|
|
|
|
weight 8 (the most prioritised); 1 stands for weight 1(least
|
|
|
|
|
prioritised); 2 stands for weight 2; tc. */
|
|
|
|
|
#define XCM_REG_XSDM_WEIGHT 0x200e0
|
|
|
|
|
/* [RW 17] Indirect access to the descriptor table of the XX protection
|
|
|
|
|
mechanism. The fields are: [5:0] - message length; 11:6] - message
|
|
|
|
|
pointer; 16:12] - next pointer. */
|
|
|
|
|
#define XCM_REG_XX_DESCR_TABLE 0x20480
|
2008-06-24 11:27:52 +08:00
|
|
|
#define XCM_REG_XX_DESCR_TABLE_SIZE 32
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [R 6] Used to read the XX protection Free counter. */
|
|
|
|
|
#define XCM_REG_XX_FREE 0x20240
|
|
|
|
|
/* [RW 6] Initial value for the credit counter; responsible for fulfilling
|
|
|
|
|
of the Input Stage XX protection buffer by the XX protection pending
|
|
|
|
|
messages. Max credit available - 3.Write writes the initial credit value;
|
|
|
|
|
read returns the current value of the credit counter. Must be initialized
|
|
|
|
|
to 2 at start-up. */
|
|
|
|
|
#define XCM_REG_XX_INIT_CRD 0x20424
|
|
|
|
|
/* [RW 6] The maximum number of pending messages; which may be stored in XX
|
|
|
|
|
protection. ~xcm_registers_xx_free.xx_free read on read. */
|
|
|
|
|
#define XCM_REG_XX_MSG_NUM 0x20428
|
|
|
|
|
/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
|
|
|
|
|
#define XCM_REG_XX_OVFL_EVNT_ID 0x20058
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [RW 16] Indirect access to the XX table of the XX protection mechanism.
|
2007-11-16 02:09:02 +08:00
|
|
|
The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] -
|
|
|
|
|
header pointer. */
|
|
|
|
|
#define XCM_REG_XX_TABLE 0x20500
|
|
|
|
|
/* [RW 8] The event id for aggregated interrupt 0 */
|
|
|
|
|
#define XSDM_REG_AGG_INT_EVENT_0 0x166038
|
|
|
|
|
#define XSDM_REG_AGG_INT_EVENT_1 0x16603c
|
|
|
|
|
#define XSDM_REG_AGG_INT_EVENT_10 0x166060
|
|
|
|
|
#define XSDM_REG_AGG_INT_EVENT_11 0x166064
|
|
|
|
|
#define XSDM_REG_AGG_INT_EVENT_12 0x166068
|
|
|
|
|
#define XSDM_REG_AGG_INT_EVENT_13 0x16606c
|
|
|
|
|
#define XSDM_REG_AGG_INT_EVENT_14 0x166070
|
|
|
|
|
#define XSDM_REG_AGG_INT_EVENT_2 0x166040
|
2008-06-24 11:27:52 +08:00
|
|
|
#define XSDM_REG_AGG_INT_EVENT_3 0x166044
|
|
|
|
|
#define XSDM_REG_AGG_INT_EVENT_4 0x166048
|
|
|
|
|
#define XSDM_REG_AGG_INT_EVENT_5 0x16604c
|
|
|
|
|
#define XSDM_REG_AGG_INT_EVENT_6 0x166050
|
|
|
|
|
#define XSDM_REG_AGG_INT_EVENT_7 0x166054
|
|
|
|
|
#define XSDM_REG_AGG_INT_EVENT_8 0x166058
|
|
|
|
|
#define XSDM_REG_AGG_INT_EVENT_9 0x16605c
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
|
|
|
|
|
or auto-mask-mode (1) */
|
|
|
|
|
#define XSDM_REG_AGG_INT_MODE_0 0x1661b8
|
|
|
|
|
#define XSDM_REG_AGG_INT_MODE_1 0x1661bc
|
|
|
|
|
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
|
|
|
|
|
#define XSDM_REG_CFC_RSP_START_ADDR 0x166008
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #0 */
|
|
|
|
|
#define XSDM_REG_CMP_COUNTER_MAX0 0x16601c
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #1 */
|
|
|
|
|
#define XSDM_REG_CMP_COUNTER_MAX1 0x166020
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #2 */
|
|
|
|
|
#define XSDM_REG_CMP_COUNTER_MAX2 0x166024
|
|
|
|
|
/* [RW 16] The maximum value of the competion counter #3 */
|
|
|
|
|
#define XSDM_REG_CMP_COUNTER_MAX3 0x166028
|
|
|
|
|
/* [RW 13] The start address in the internal RAM for the completion
|
|
|
|
|
counters. */
|
|
|
|
|
#define XSDM_REG_CMP_COUNTER_START_ADDR 0x16600c
|
|
|
|
|
#define XSDM_REG_ENABLE_IN1 0x166238
|
|
|
|
|
#define XSDM_REG_ENABLE_IN2 0x16623c
|
|
|
|
|
#define XSDM_REG_ENABLE_OUT1 0x166240
|
|
|
|
|
#define XSDM_REG_ENABLE_OUT2 0x166244
|
|
|
|
|
/* [RW 4] The initial number of messages that can be sent to the pxp control
|
|
|
|
|
interface without receiving any ACK. */
|
|
|
|
|
#define XSDM_REG_INIT_CREDIT_PXP_CTRL 0x1664bc
|
|
|
|
|
/* [ST 32] The number of ACK after placement messages received */
|
|
|
|
|
#define XSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x16627c
|
|
|
|
|
/* [ST 32] The number of packet end messages received from the parser */
|
|
|
|
|
#define XSDM_REG_NUM_OF_PKT_END_MSG 0x166274
|
|
|
|
|
/* [ST 32] The number of requests received from the pxp async if */
|
|
|
|
|
#define XSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x166278
|
|
|
|
|
/* [ST 32] The number of commands received in queue 0 */
|
|
|
|
|
#define XSDM_REG_NUM_OF_Q0_CMD 0x166248
|
|
|
|
|
/* [ST 32] The number of commands received in queue 10 */
|
|
|
|
|
#define XSDM_REG_NUM_OF_Q10_CMD 0x16626c
|
|
|
|
|
/* [ST 32] The number of commands received in queue 11 */
|
|
|
|
|
#define XSDM_REG_NUM_OF_Q11_CMD 0x166270
|
|
|
|
|
/* [ST 32] The number of commands received in queue 1 */
|
|
|
|
|
#define XSDM_REG_NUM_OF_Q1_CMD 0x16624c
|
|
|
|
|
/* [ST 32] The number of commands received in queue 3 */
|
|
|
|
|
#define XSDM_REG_NUM_OF_Q3_CMD 0x166250
|
|
|
|
|
/* [ST 32] The number of commands received in queue 4 */
|
|
|
|
|
#define XSDM_REG_NUM_OF_Q4_CMD 0x166254
|
|
|
|
|
/* [ST 32] The number of commands received in queue 5 */
|
|
|
|
|
#define XSDM_REG_NUM_OF_Q5_CMD 0x166258
|
|
|
|
|
/* [ST 32] The number of commands received in queue 6 */
|
|
|
|
|
#define XSDM_REG_NUM_OF_Q6_CMD 0x16625c
|
|
|
|
|
/* [ST 32] The number of commands received in queue 7 */
|
|
|
|
|
#define XSDM_REG_NUM_OF_Q7_CMD 0x166260
|
|
|
|
|
/* [ST 32] The number of commands received in queue 8 */
|
|
|
|
|
#define XSDM_REG_NUM_OF_Q8_CMD 0x166264
|
|
|
|
|
/* [ST 32] The number of commands received in queue 9 */
|
|
|
|
|
#define XSDM_REG_NUM_OF_Q9_CMD 0x166268
|
|
|
|
|
/* [RW 13] The start address in the internal RAM for queue counters */
|
|
|
|
|
#define XSDM_REG_Q_COUNTER_START_ADDR 0x166010
|
|
|
|
|
/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
|
|
|
|
|
#define XSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x166548
|
|
|
|
|
/* [R 1] parser fifo empty in sdm_sync block */
|
|
|
|
|
#define XSDM_REG_SYNC_PARSER_EMPTY 0x166550
|
|
|
|
|
/* [R 1] parser serial fifo empty in sdm_sync block */
|
|
|
|
|
#define XSDM_REG_SYNC_SYNC_EMPTY 0x166558
|
|
|
|
|
/* [RW 32] Tick for timer counter. Applicable only when
|
|
|
|
|
~xsdm_registers_timer_tick_enable.timer_tick_enable =1 */
|
|
|
|
|
#define XSDM_REG_TIMER_TICK 0x166000
|
|
|
|
|
/* [RW 32] Interrupt mask register #0 read/write */
|
|
|
|
|
#define XSDM_REG_XSDM_INT_MASK_0 0x16629c
|
|
|
|
|
#define XSDM_REG_XSDM_INT_MASK_1 0x1662ac
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 32] Interrupt register #0 read */
|
|
|
|
|
#define XSDM_REG_XSDM_INT_STS_0 0x166290
|
|
|
|
|
#define XSDM_REG_XSDM_INT_STS_1 0x1662a0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 11] Parity mask register #0 read/write */
|
|
|
|
|
#define XSDM_REG_XSDM_PRTY_MASK 0x1662bc
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 11] Parity register #0 read */
|
|
|
|
|
#define XSDM_REG_XSDM_PRTY_STS 0x1662b0
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 5] The number of time_slots in the arbitration cycle */
|
|
|
|
|
#define XSEM_REG_ARB_CYCLE_SIZE 0x280034
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 0. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2 */
|
|
|
|
|
#define XSEM_REG_ARB_ELEMENT0 0x280020
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 1. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.
|
|
|
|
|
Could not be equal to register ~xsem_registers_arb_element0.arb_element0 */
|
|
|
|
|
#define XSEM_REG_ARB_ELEMENT1 0x280024
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 2. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.
|
|
|
|
|
Could not be equal to register ~xsem_registers_arb_element0.arb_element0
|
|
|
|
|
and ~xsem_registers_arb_element1.arb_element1 */
|
|
|
|
|
#define XSEM_REG_ARB_ELEMENT2 0x280028
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 3. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
|
|
|
|
|
not be equal to register ~xsem_registers_arb_element0.arb_element0 and
|
|
|
|
|
~xsem_registers_arb_element1.arb_element1 and
|
|
|
|
|
~xsem_registers_arb_element2.arb_element2 */
|
|
|
|
|
#define XSEM_REG_ARB_ELEMENT3 0x28002c
|
|
|
|
|
/* [RW 3] The source that is associated with arbitration element 4. Source
|
|
|
|
|
decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
|
|
|
|
|
sleeping thread with priority 1; 4- sleeping thread with priority 2.
|
|
|
|
|
Could not be equal to register ~xsem_registers_arb_element0.arb_element0
|
|
|
|
|
and ~xsem_registers_arb_element1.arb_element1 and
|
|
|
|
|
~xsem_registers_arb_element2.arb_element2 and
|
|
|
|
|
~xsem_registers_arb_element3.arb_element3 */
|
|
|
|
|
#define XSEM_REG_ARB_ELEMENT4 0x280030
|
|
|
|
|
#define XSEM_REG_ENABLE_IN 0x2800a4
|
|
|
|
|
#define XSEM_REG_ENABLE_OUT 0x2800a8
|
|
|
|
|
/* [RW 32] This address space contains all registers and memories that are
|
|
|
|
|
placed in SEM_FAST block. The SEM_FAST registers are described in
|
2008-06-24 11:27:52 +08:00
|
|
|
appendix B. In order to access the sem_fast registers the base address
|
|
|
|
|
~fast_memory.fast_memory should be added to eachsem_fast register offset. */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define XSEM_REG_FAST_MEMORY 0x2a0000
|
|
|
|
|
/* [RW 1] Disables input messages from FIC0 May be updated during run_time
|
|
|
|
|
by the microcode */
|
|
|
|
|
#define XSEM_REG_FIC0_DISABLE 0x280224
|
|
|
|
|
/* [RW 1] Disables input messages from FIC1 May be updated during run_time
|
|
|
|
|
by the microcode */
|
|
|
|
|
#define XSEM_REG_FIC1_DISABLE 0x280234
|
|
|
|
|
/* [RW 15] Interrupt table Read and write access to it is not possible in
|
|
|
|
|
the middle of the work */
|
|
|
|
|
#define XSEM_REG_INT_TABLE 0x280400
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that entered through
|
|
|
|
|
FIC0 */
|
|
|
|
|
#define XSEM_REG_MSG_NUM_FIC0 0x280000
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that entered through
|
|
|
|
|
FIC1 */
|
|
|
|
|
#define XSEM_REG_MSG_NUM_FIC1 0x280004
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC0 */
|
|
|
|
|
#define XSEM_REG_MSG_NUM_FOC0 0x280008
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC1 */
|
|
|
|
|
#define XSEM_REG_MSG_NUM_FOC1 0x28000c
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC2 */
|
|
|
|
|
#define XSEM_REG_MSG_NUM_FOC2 0x280010
|
|
|
|
|
/* [ST 24] Statistics register. The number of messages that were sent to
|
|
|
|
|
FOC3 */
|
|
|
|
|
#define XSEM_REG_MSG_NUM_FOC3 0x280014
|
|
|
|
|
/* [RW 1] Disables input messages from the passive buffer May be updated
|
|
|
|
|
during run_time by the microcode */
|
|
|
|
|
#define XSEM_REG_PAS_DISABLE 0x28024c
|
|
|
|
|
/* [WB 128] Debug only. Passive buffer memory */
|
|
|
|
|
#define XSEM_REG_PASSIVE_BUFFER 0x282000
|
|
|
|
|
/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
|
|
|
|
|
#define XSEM_REG_PRAM 0x2c0000
|
|
|
|
|
/* [R 16] Valid sleeping threads indication have bit per thread */
|
|
|
|
|
#define XSEM_REG_SLEEP_THREADS_VALID 0x28026c
|
|
|
|
|
/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
|
|
|
|
|
#define XSEM_REG_SLOW_EXT_STORE_EMPTY 0x2802a0
|
|
|
|
|
/* [RW 16] List of free threads . There is a bit per thread. */
|
|
|
|
|
#define XSEM_REG_THREADS_LIST 0x2802e4
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 0 */
|
|
|
|
|
#define XSEM_REG_TS_0_AS 0x280038
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 10 */
|
|
|
|
|
#define XSEM_REG_TS_10_AS 0x280060
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 11 */
|
|
|
|
|
#define XSEM_REG_TS_11_AS 0x280064
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 12 */
|
|
|
|
|
#define XSEM_REG_TS_12_AS 0x280068
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 13 */
|
|
|
|
|
#define XSEM_REG_TS_13_AS 0x28006c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 14 */
|
|
|
|
|
#define XSEM_REG_TS_14_AS 0x280070
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 15 */
|
|
|
|
|
#define XSEM_REG_TS_15_AS 0x280074
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 16 */
|
|
|
|
|
#define XSEM_REG_TS_16_AS 0x280078
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 17 */
|
|
|
|
|
#define XSEM_REG_TS_17_AS 0x28007c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 18 */
|
|
|
|
|
#define XSEM_REG_TS_18_AS 0x280080
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 1 */
|
|
|
|
|
#define XSEM_REG_TS_1_AS 0x28003c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 2 */
|
|
|
|
|
#define XSEM_REG_TS_2_AS 0x280040
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 3 */
|
|
|
|
|
#define XSEM_REG_TS_3_AS 0x280044
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 4 */
|
|
|
|
|
#define XSEM_REG_TS_4_AS 0x280048
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 5 */
|
|
|
|
|
#define XSEM_REG_TS_5_AS 0x28004c
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 6 */
|
|
|
|
|
#define XSEM_REG_TS_6_AS 0x280050
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 7 */
|
|
|
|
|
#define XSEM_REG_TS_7_AS 0x280054
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 8 */
|
|
|
|
|
#define XSEM_REG_TS_8_AS 0x280058
|
|
|
|
|
/* [RW 3] The arbitration scheme of time_slot 9 */
|
|
|
|
|
#define XSEM_REG_TS_9_AS 0x28005c
|
2010-10-06 11:28:26 +08:00
|
|
|
/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
|
|
|
|
|
* VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
|
|
|
|
|
#define XSEM_REG_VFPF_ERR_NUM 0x280380
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] Interrupt mask register #0 read/write */
|
|
|
|
|
#define XSEM_REG_XSEM_INT_MASK_0 0x280110
|
|
|
|
|
#define XSEM_REG_XSEM_INT_MASK_1 0x280120
|
2008-06-24 11:27:52 +08:00
|
|
|
/* [R 32] Interrupt register #0 read */
|
|
|
|
|
#define XSEM_REG_XSEM_INT_STS_0 0x280104
|
|
|
|
|
#define XSEM_REG_XSEM_INT_STS_1 0x280114
|
2007-11-16 02:09:02 +08:00
|
|
|
/* [RW 32] Parity mask register #0 read/write */
|
|
|
|
|
#define XSEM_REG_XSEM_PRTY_MASK_0 0x280130
|
|
|
|
|
#define XSEM_REG_XSEM_PRTY_MASK_1 0x280140
|
2008-02-29 03:51:50 +08:00
|
|
|
/* [R 32] Parity register #0 read */
|
|
|
|
|
#define XSEM_REG_XSEM_PRTY_STS_0 0x280124
|
|
|
|
|
#define XSEM_REG_XSEM_PRTY_STS_1 0x280134
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0)
|
|
|
|
|
#define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1)
|
|
|
|
|
#define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0)
|
|
|
|
|
#define MCPR_NVM_CFG4_FLASH_SIZE (0x7L<<0)
|
|
|
|
|
#define MCPR_NVM_COMMAND_DOIT (1L<<4)
|
|
|
|
|
#define MCPR_NVM_COMMAND_DONE (1L<<3)
|
|
|
|
|
#define MCPR_NVM_COMMAND_FIRST (1L<<7)
|
|
|
|
|
#define MCPR_NVM_COMMAND_LAST (1L<<8)
|
|
|
|
|
#define MCPR_NVM_COMMAND_WR (1L<<5)
|
|
|
|
|
#define MCPR_NVM_SW_ARB_ARB_ARB1 (1L<<9)
|
|
|
|
|
#define MCPR_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5)
|
|
|
|
|
#define MCPR_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1)
|
|
|
|
|
#define BIGMAC_REGISTER_BMAC_CONTROL (0x00<<3)
|
|
|
|
|
#define BIGMAC_REGISTER_BMAC_XGXS_CONTROL (0x01<<3)
|
|
|
|
|
#define BIGMAC_REGISTER_CNT_MAX_SIZE (0x05<<3)
|
|
|
|
|
#define BIGMAC_REGISTER_RX_CONTROL (0x21<<3)
|
|
|
|
|
#define BIGMAC_REGISTER_RX_LLFC_MSG_FLDS (0x46<<3)
|
|
|
|
|
#define BIGMAC_REGISTER_RX_MAX_SIZE (0x23<<3)
|
|
|
|
|
#define BIGMAC_REGISTER_RX_STAT_GR64 (0x26<<3)
|
|
|
|
|
#define BIGMAC_REGISTER_RX_STAT_GRIPJ (0x42<<3)
|
|
|
|
|
#define BIGMAC_REGISTER_TX_CONTROL (0x07<<3)
|
|
|
|
|
#define BIGMAC_REGISTER_TX_MAX_SIZE (0x09<<3)
|
|
|
|
|
#define BIGMAC_REGISTER_TX_PAUSE_THRESHOLD (0x0A<<3)
|
|
|
|
|
#define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3)
|
|
|
|
|
#define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3)
|
|
|
|
|
#define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3)
|
2010-10-06 11:28:26 +08:00
|
|
|
#define BIGMAC2_REGISTER_BMAC_CONTROL (0x00<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_BMAC_XGXS_CONTROL (0x01<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_CNT_MAX_SIZE (0x05<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_PFC_CONTROL (0x06<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_RX_CONTROL (0x3A<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_RX_LLFC_MSG_FLDS (0x62<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_RX_MAX_SIZE (0x3C<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_RX_STAT_GR64 (0x40<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_RX_STAT_GRIPJ (0x5f<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_RX_STAT_GRPP (0x51<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_TX_CONTROL (0x1C<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_TX_MAX_SIZE (0x1E<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_TX_PAUSE_CONTROL (0x20<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_TX_SOURCE_ADDR (0x1D<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_TX_STAT_GTBYT (0x39<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_TX_STAT_GTPOK (0x22<<3)
|
|
|
|
|
#define BIGMAC2_REGISTER_TX_STAT_GTPP (0x24<<3)
|
2008-06-24 11:27:52 +08:00
|
|
|
#define EMAC_LED_1000MB_OVERRIDE (1L<<1)
|
|
|
|
|
#define EMAC_LED_100MB_OVERRIDE (1L<<2)
|
|
|
|
|
#define EMAC_LED_10MB_OVERRIDE (1L<<3)
|
|
|
|
|
#define EMAC_LED_2500MB_OVERRIDE (1L<<12)
|
|
|
|
|
#define EMAC_LED_OVERRIDE (1L<<0)
|
|
|
|
|
#define EMAC_LED_TRAFFIC (1L<<6)
|
2007-11-16 02:09:02 +08:00
|
|
|
#define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26)
|
|
|
|
|
#define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26)
|
|
|
|
|
#define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26)
|
|
|
|
|
#define EMAC_MDIO_COMM_DATA (0xffffL<<0)
|
|
|
|
|
#define EMAC_MDIO_COMM_START_BUSY (1L<<29)
|
|
|
|
|
#define EMAC_MDIO_MODE_AUTO_POLL (1L<<4)
|
|
|
|
|
#define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31)
|
2008-02-29 03:51:50 +08:00
|
|
|
#define EMAC_MDIO_MODE_CLOCK_CNT (0x3fL<<16)
|
|
|
|
|
#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16
|
2007-11-16 02:09:02 +08:00
|
|
|
#define EMAC_MODE_25G_MODE (1L<<5)
|
|
|
|
|
#define EMAC_MODE_HALF_DUPLEX (1L<<1)
|
|
|
|
|
#define EMAC_MODE_PORT_GMII (2L<<2)
|
|
|
|
|
#define EMAC_MODE_PORT_MII (1L<<2)
|
|
|
|
|
#define EMAC_MODE_PORT_MII_10M (3L<<2)
|
|
|
|
|
#define EMAC_MODE_RESET (1L<<0)
|
2008-06-24 11:27:52 +08:00
|
|
|
#define EMAC_REG_EMAC_LED 0xc
|
2007-11-16 02:09:02 +08:00
|
|
|
#define EMAC_REG_EMAC_MAC_MATCH 0x10
|
|
|
|
|
#define EMAC_REG_EMAC_MDIO_COMM 0xac
|
|
|
|
|
#define EMAC_REG_EMAC_MDIO_MODE 0xb4
|
|
|
|
|
#define EMAC_REG_EMAC_MODE 0x0
|
|
|
|
|
#define EMAC_REG_EMAC_RX_MODE 0xc8
|
|
|
|
|
#define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c
|
|
|
|
|
#define EMAC_REG_EMAC_RX_STAT_AC 0x180
|
|
|
|
|
#define EMAC_REG_EMAC_RX_STAT_AC_28 0x1f4
|
|
|
|
|
#define EMAC_REG_EMAC_RX_STAT_AC_COUNT 23
|
|
|
|
|
#define EMAC_REG_EMAC_TX_MODE 0xbc
|
|
|
|
|
#define EMAC_REG_EMAC_TX_STAT_AC 0x280
|
|
|
|
|
#define EMAC_REG_EMAC_TX_STAT_AC_COUNT 22
|
|
|
|
|
#define EMAC_RX_MODE_FLOW_EN (1L<<2)
|
|
|
|
|
#define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10)
|
|
|
|
|
#define EMAC_RX_MODE_PROMISCUOUS (1L<<8)
|
2009-02-12 16:37:04 +08:00
|
|
|
#define EMAC_RX_MODE_RESET (1L<<0)
|
2007-11-16 02:09:02 +08:00
|
|
|
#define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31)
|
|
|
|
|
#define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3)
|
2008-08-14 06:56:17 +08:00
|
|
|
#define EMAC_TX_MODE_FLOW_EN (1L<<4)
|
2009-02-12 16:37:04 +08:00
|
|
|
#define EMAC_TX_MODE_RESET (1L<<0)
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MISC_REGISTERS_GPIO_0 0
|
2008-02-29 03:51:50 +08:00
|
|
|
#define MISC_REGISTERS_GPIO_1 1
|
|
|
|
|
#define MISC_REGISTERS_GPIO_2 2
|
|
|
|
|
#define MISC_REGISTERS_GPIO_3 3
|
|
|
|
|
#define MISC_REGISTERS_GPIO_CLR_POS 16
|
|
|
|
|
#define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24)
|
|
|
|
|
#define MISC_REGISTERS_GPIO_FLOAT_POS 24
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MISC_REGISTERS_GPIO_HIGH 1
|
2008-02-29 03:51:50 +08:00
|
|
|
#define MISC_REGISTERS_GPIO_INPUT_HI_Z 2
|
2009-02-12 16:36:52 +08:00
|
|
|
#define MISC_REGISTERS_GPIO_INT_CLR_POS 24
|
|
|
|
|
#define MISC_REGISTERS_GPIO_INT_OUTPUT_CLR 0
|
|
|
|
|
#define MISC_REGISTERS_GPIO_INT_OUTPUT_SET 1
|
|
|
|
|
#define MISC_REGISTERS_GPIO_INT_SET_POS 16
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MISC_REGISTERS_GPIO_LOW 0
|
2008-02-29 03:51:50 +08:00
|
|
|
#define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1
|
|
|
|
|
#define MISC_REGISTERS_GPIO_OUTPUT_LOW 0
|
|
|
|
|
#define MISC_REGISTERS_GPIO_PORT_SHIFT 4
|
|
|
|
|
#define MISC_REGISTERS_GPIO_SET_POS 8
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588
|
2010-04-19 09:13:12 +08:00
|
|
|
#define MISC_REGISTERS_RESET_REG_1_RST_HC (0x1<<29)
|
2008-08-14 06:50:00 +08:00
|
|
|
#define MISC_REGISTERS_RESET_REG_1_RST_NIG (0x1<<7)
|
2010-04-19 09:13:12 +08:00
|
|
|
#define MISC_REGISTERS_RESET_REG_1_RST_PXP (0x1<<26)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_1_RST_PXPV (0x1<<27)
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MISC_REGISTERS_RESET_REG_1_SET 0x584
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_2_RST_BMAC0 (0x1<<0)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE (0x1<<14)
|
2010-04-19 09:13:12 +08:00
|
|
|
#define MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE (0x1<<15)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_2_RST_GRC (0x1<<4)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B (0x1<<6)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE (0x1<<5)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_2_RST_MDIO (0x1<<13)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE (0x1<<11)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_2_RST_RBCN (0x1<<9)
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MISC_REGISTERS_RESET_REG_2_SET 0x594
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_3_CLEAR 0x5a8
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ (0x1<<1)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN (0x1<<2)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD (0x1<<3)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW (0x1<<0)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ (0x1<<5)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN (0x1<<6)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD (0x1<<7)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8)
|
|
|
|
|
#define MISC_REGISTERS_RESET_REG_3_SET 0x5a4
|
2008-02-29 03:51:50 +08:00
|
|
|
#define MISC_REGISTERS_SPIO_4 4
|
|
|
|
|
#define MISC_REGISTERS_SPIO_5 5
|
|
|
|
|
#define MISC_REGISTERS_SPIO_7 7
|
|
|
|
|
#define MISC_REGISTERS_SPIO_CLR_POS 16
|
|
|
|
|
#define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24)
|
|
|
|
|
#define MISC_REGISTERS_SPIO_FLOAT_POS 24
|
|
|
|
|
#define MISC_REGISTERS_SPIO_INPUT_HI_Z 2
|
|
|
|
|
#define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16
|
|
|
|
|
#define MISC_REGISTERS_SPIO_OUTPUT_HIGH 1
|
|
|
|
|
#define MISC_REGISTERS_SPIO_OUTPUT_LOW 0
|
|
|
|
|
#define MISC_REGISTERS_SPIO_SET_POS 8
|
|
|
|
|
#define HW_LOCK_MAX_RESOURCE_VALUE 31
|
|
|
|
|
#define HW_LOCK_RESOURCE_GPIO 1
|
2009-02-12 16:36:58 +08:00
|
|
|
#define HW_LOCK_RESOURCE_MDIO 0
|
2008-08-14 06:50:45 +08:00
|
|
|
#define HW_LOCK_RESOURCE_PORT0_ATT_MASK 3
|
2010-04-19 09:13:12 +08:00
|
|
|
#define HW_LOCK_RESOURCE_RESERVED_08 8
|
2008-02-29 03:51:50 +08:00
|
|
|
#define HW_LOCK_RESOURCE_SPIO 2
|
2008-08-14 06:50:00 +08:00
|
|
|
#define HW_LOCK_RESOURCE_UNDI 5
|
2009-02-12 16:37:16 +08:00
|
|
|
#define PRS_FLAG_OVERETH_IPV4 1
|
2010-10-06 11:28:26 +08:00
|
|
|
#define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1<<4)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1<<5)
|
2007-11-16 02:09:02 +08:00
|
|
|
#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1<<18)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1<<31)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1<<9)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR (1<<8)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT (1<<7)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR (1<<6)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT (1<<29)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR (1<<28)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT (1<<1)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR (1<<0)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR (1<<18)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (1<<11)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (1<<13)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (1<<12)
|
2009-02-12 16:36:52 +08:00
|
|
|
#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 (1<<5)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 (1<<9)
|
2007-11-16 02:09:02 +08:00
|
|
|
#define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (1<<12)
|
2010-04-19 09:13:12 +08:00
|
|
|
#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY (1<<28)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY (1<<31)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY (1<<29)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY (1<<30)
|
2007-11-16 02:09:02 +08:00
|
|
|
#define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT (1<<15)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR (1<<14)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR (1<<20)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR (1<<0)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_PBF_HW_INTERRUPT (1<<31)
|
2010-10-06 11:28:26 +08:00
|
|
|
#define AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT (0x1<<2)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR (0x1<<3)
|
2007-11-16 02:09:02 +08:00
|
|
|
#define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT (1<<3)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR (1<<2)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT (1<<5)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR (1<<4)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (1<<3)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (1<<2)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (1<<22)
|
2008-02-29 03:51:50 +08:00
|
|
|
#define AEU_INPUTS_ATTN_BITS_SPIO5 (1<<15)
|
2007-11-16 02:09:02 +08:00
|
|
|
#define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (1<<27)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (1<<5)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (1<<25)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR (1<<24)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT (1<<29)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR (1<<28)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT (1<<23)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT (1<<27)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR (1<<26)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT (1<<21)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR (1<<20)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT (1<<25)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR (1<<24)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR (1<<16)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT (1<<9)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT (1<<7)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR (1<<6)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT (1<<11)
|
|
|
|
|
#define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (1<<10)
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_0 0
|
|
|
|
|
|
2008-06-24 11:27:52 +08:00
|
|
|
#define EVEREST_GEN_ATTN_IN_USE_MASK 0x3ffe0
|
2007-11-16 02:09:02 +08:00
|
|
|
#define EVEREST_LATCHED_ATTN_IN_USE_MASK 0xffe00000
|
|
|
|
|
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_6 6
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_7 7
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_8 8
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_9 9
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_10 10
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_11 11
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_12 12
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_13 13
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_14 14
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_15 15
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_16 16
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_17 17
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_18 18
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_19 19
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_20 20
|
|
|
|
|
#define RESERVED_GENERAL_ATTENTION_BIT_21 21
|
|
|
|
|
|
|
|
|
|
/* storm asserts attention bits */
|
|
|
|
|
#define TSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_7
|
|
|
|
|
#define USTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_8
|
|
|
|
|
#define CSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_9
|
|
|
|
|
#define XSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_10
|
|
|
|
|
|
|
|
|
|
/* mcp error attention bit */
|
|
|
|
|
#define MCP_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_11
|
|
|
|
|
|
2008-06-24 11:27:52 +08:00
|
|
|
/*E1H NIG status sync attention mapped to group 4-7*/
|
|
|
|
|
#define LINK_SYNC_ATTENTION_BIT_FUNC_0 RESERVED_GENERAL_ATTENTION_BIT_12
|
|
|
|
|
#define LINK_SYNC_ATTENTION_BIT_FUNC_1 RESERVED_GENERAL_ATTENTION_BIT_13
|
|
|
|
|
#define LINK_SYNC_ATTENTION_BIT_FUNC_2 RESERVED_GENERAL_ATTENTION_BIT_14
|
|
|
|
|
#define LINK_SYNC_ATTENTION_BIT_FUNC_3 RESERVED_GENERAL_ATTENTION_BIT_15
|
|
|
|
|
#define LINK_SYNC_ATTENTION_BIT_FUNC_4 RESERVED_GENERAL_ATTENTION_BIT_16
|
|
|
|
|
#define LINK_SYNC_ATTENTION_BIT_FUNC_5 RESERVED_GENERAL_ATTENTION_BIT_17
|
|
|
|
|
#define LINK_SYNC_ATTENTION_BIT_FUNC_6 RESERVED_GENERAL_ATTENTION_BIT_18
|
|
|
|
|
#define LINK_SYNC_ATTENTION_BIT_FUNC_7 RESERVED_GENERAL_ATTENTION_BIT_19
|
|
|
|
|
|
|
|
|
|
|
2007-11-16 02:09:02 +08:00
|
|
|
#define LATCHED_ATTN_RBCR 23
|
|
|
|
|
#define LATCHED_ATTN_RBCT 24
|
|
|
|
|
#define LATCHED_ATTN_RBCN 25
|
|
|
|
|
#define LATCHED_ATTN_RBCU 26
|
|
|
|
|
#define LATCHED_ATTN_RBCP 27
|
|
|
|
|
#define LATCHED_ATTN_TIMEOUT_GRC 28
|
|
|
|
|
#define LATCHED_ATTN_RSVD_GRC 29
|
|
|
|
|
#define LATCHED_ATTN_ROM_PARITY_MCP 30
|
|
|
|
|
#define LATCHED_ATTN_UM_RX_PARITY_MCP 31
|
|
|
|
|
#define LATCHED_ATTN_UM_TX_PARITY_MCP 32
|
|
|
|
|
#define LATCHED_ATTN_SCPAD_PARITY_MCP 33
|
|
|
|
|
|
|
|
|
|
#define GENERAL_ATTEN_WORD(atten_name) ((94 + atten_name) / 32)
|
2009-08-12 16:24:29 +08:00
|
|
|
#define GENERAL_ATTEN_OFFSET(atten_name)\
|
|
|
|
|
(1UL << ((94 + atten_name) % 32))
|
2007-11-16 02:09:02 +08:00
|
|
|
/*
|
|
|
|
|
* This file defines GRC base address for every block.
|
|
|
|
|
* This file is included by chipsim, asm microcode and cpp microcode.
|
|
|
|
|
* These values are used in Design.xml on regBase attribute
|
|
|
|
|
* Use the base with the generated offsets of specific registers.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define GRCBASE_PXPCS 0x000000
|
|
|
|
|
#define GRCBASE_PCICONFIG 0x002000
|
|
|
|
|
#define GRCBASE_PCIREG 0x002400
|
|
|
|
|
#define GRCBASE_EMAC0 0x008000
|
|
|
|
|
#define GRCBASE_EMAC1 0x008400
|
|
|
|
|
#define GRCBASE_DBU 0x008800
|
|
|
|
|
#define GRCBASE_MISC 0x00A000
|
|
|
|
|
#define GRCBASE_DBG 0x00C000
|
|
|
|
|
#define GRCBASE_NIG 0x010000
|
|
|
|
|
#define GRCBASE_XCM 0x020000
|
|
|
|
|
#define GRCBASE_PRS 0x040000
|
|
|
|
|
#define GRCBASE_SRCH 0x040400
|
|
|
|
|
#define GRCBASE_TSDM 0x042000
|
|
|
|
|
#define GRCBASE_TCM 0x050000
|
|
|
|
|
#define GRCBASE_BRB1 0x060000
|
|
|
|
|
#define GRCBASE_MCP 0x080000
|
|
|
|
|
#define GRCBASE_UPB 0x0C1000
|
|
|
|
|
#define GRCBASE_CSDM 0x0C2000
|
|
|
|
|
#define GRCBASE_USDM 0x0C4000
|
|
|
|
|
#define GRCBASE_CCM 0x0D0000
|
|
|
|
|
#define GRCBASE_UCM 0x0E0000
|
|
|
|
|
#define GRCBASE_CDU 0x101000
|
|
|
|
|
#define GRCBASE_DMAE 0x102000
|
|
|
|
|
#define GRCBASE_PXP 0x103000
|
|
|
|
|
#define GRCBASE_CFC 0x104000
|
|
|
|
|
#define GRCBASE_HC 0x108000
|
|
|
|
|
#define GRCBASE_PXP2 0x120000
|
|
|
|
|
#define GRCBASE_PBF 0x140000
|
|
|
|
|
#define GRCBASE_XPB 0x161000
|
|
|
|
|
#define GRCBASE_TIMERS 0x164000
|
|
|
|
|
#define GRCBASE_XSDM 0x166000
|
|
|
|
|
#define GRCBASE_QM 0x168000
|
|
|
|
|
#define GRCBASE_DQ 0x170000
|
|
|
|
|
#define GRCBASE_TSEM 0x180000
|
|
|
|
|
#define GRCBASE_CSEM 0x200000
|
|
|
|
|
#define GRCBASE_XSEM 0x280000
|
|
|
|
|
#define GRCBASE_USEM 0x300000
|
|
|
|
|
#define GRCBASE_MISC_AEU GRCBASE_MISC
|
|
|
|
|
|
|
|
|
|
|
2008-08-14 06:51:48 +08:00
|
|
|
/* offset of configuration space in the pci core register */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define PCICFG_OFFSET 0x2000
|
|
|
|
|
#define PCICFG_VENDOR_ID_OFFSET 0x00
|
|
|
|
|
#define PCICFG_DEVICE_ID_OFFSET 0x02
|
2008-06-24 11:27:52 +08:00
|
|
|
#define PCICFG_COMMAND_OFFSET 0x04
|
2008-08-14 06:51:48 +08:00
|
|
|
#define PCICFG_COMMAND_IO_SPACE (1<<0)
|
|
|
|
|
#define PCICFG_COMMAND_MEM_SPACE (1<<1)
|
|
|
|
|
#define PCICFG_COMMAND_BUS_MASTER (1<<2)
|
|
|
|
|
#define PCICFG_COMMAND_SPECIAL_CYCLES (1<<3)
|
|
|
|
|
#define PCICFG_COMMAND_MWI_CYCLES (1<<4)
|
|
|
|
|
#define PCICFG_COMMAND_VGA_SNOOP (1<<5)
|
|
|
|
|
#define PCICFG_COMMAND_PERR_ENA (1<<6)
|
|
|
|
|
#define PCICFG_COMMAND_STEPPING (1<<7)
|
|
|
|
|
#define PCICFG_COMMAND_SERR_ENA (1<<8)
|
|
|
|
|
#define PCICFG_COMMAND_FAST_B2B (1<<9)
|
|
|
|
|
#define PCICFG_COMMAND_INT_DISABLE (1<<10)
|
|
|
|
|
#define PCICFG_COMMAND_RESERVED (0x1f<<11)
|
2008-06-24 11:27:52 +08:00
|
|
|
#define PCICFG_STATUS_OFFSET 0x06
|
2009-03-02 15:59:20 +08:00
|
|
|
#define PCICFG_REVESION_ID_OFFSET 0x08
|
2007-11-16 02:09:02 +08:00
|
|
|
#define PCICFG_CACHE_LINE_SIZE 0x0c
|
|
|
|
|
#define PCICFG_LATENCY_TIMER 0x0d
|
2008-08-14 06:51:48 +08:00
|
|
|
#define PCICFG_BAR_1_LOW 0x10
|
|
|
|
|
#define PCICFG_BAR_1_HIGH 0x14
|
|
|
|
|
#define PCICFG_BAR_2_LOW 0x18
|
|
|
|
|
#define PCICFG_BAR_2_HIGH 0x1c
|
|
|
|
|
#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c
|
2008-06-24 11:27:52 +08:00
|
|
|
#define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e
|
2008-08-14 06:51:48 +08:00
|
|
|
#define PCICFG_INT_LINE 0x3c
|
|
|
|
|
#define PCICFG_INT_PIN 0x3d
|
|
|
|
|
#define PCICFG_PM_CAPABILITY 0x48
|
|
|
|
|
#define PCICFG_PM_CAPABILITY_VERSION (0x3<<16)
|
|
|
|
|
#define PCICFG_PM_CAPABILITY_CLOCK (1<<19)
|
|
|
|
|
#define PCICFG_PM_CAPABILITY_RESERVED (1<<20)
|
|
|
|
|
#define PCICFG_PM_CAPABILITY_DSI (1<<21)
|
|
|
|
|
#define PCICFG_PM_CAPABILITY_AUX_CURRENT (0x7<<22)
|
|
|
|
|
#define PCICFG_PM_CAPABILITY_D1_SUPPORT (1<<25)
|
|
|
|
|
#define PCICFG_PM_CAPABILITY_D2_SUPPORT (1<<26)
|
|
|
|
|
#define PCICFG_PM_CAPABILITY_PME_IN_D0 (1<<27)
|
|
|
|
|
#define PCICFG_PM_CAPABILITY_PME_IN_D1 (1<<28)
|
|
|
|
|
#define PCICFG_PM_CAPABILITY_PME_IN_D2 (1<<29)
|
|
|
|
|
#define PCICFG_PM_CAPABILITY_PME_IN_D3_HOT (1<<30)
|
|
|
|
|
#define PCICFG_PM_CAPABILITY_PME_IN_D3_COLD (1<<31)
|
|
|
|
|
#define PCICFG_PM_CSR_OFFSET 0x4c
|
|
|
|
|
#define PCICFG_PM_CSR_STATE (0x3<<0)
|
|
|
|
|
#define PCICFG_PM_CSR_PME_ENABLE (1<<8)
|
|
|
|
|
#define PCICFG_PM_CSR_PME_STATUS (1<<15)
|
2009-03-02 15:59:20 +08:00
|
|
|
#define PCICFG_MSI_CAP_ID_OFFSET 0x58
|
2009-02-12 16:36:15 +08:00
|
|
|
#define PCICFG_MSI_CONTROL_ENABLE (0x1<<16)
|
|
|
|
|
#define PCICFG_MSI_CONTROL_MCAP (0x7<<17)
|
|
|
|
|
#define PCICFG_MSI_CONTROL_MENA (0x7<<20)
|
|
|
|
|
#define PCICFG_MSI_CONTROL_64_BIT_ADDR_CAP (0x1<<23)
|
|
|
|
|
#define PCICFG_MSI_CONTROL_MSI_PVMASK_CAPABLE (0x1<<24)
|
2008-08-14 06:51:48 +08:00
|
|
|
#define PCICFG_GRC_ADDRESS 0x78
|
|
|
|
|
#define PCICFG_GRC_DATA 0x80
|
2009-03-02 15:59:20 +08:00
|
|
|
#define PCICFG_MSIX_CAP_ID_OFFSET 0xa0
|
2009-02-12 16:36:15 +08:00
|
|
|
#define PCICFG_MSIX_CONTROL_TABLE_SIZE (0x7ff<<16)
|
|
|
|
|
#define PCICFG_MSIX_CONTROL_RESERVED (0x7<<27)
|
|
|
|
|
#define PCICFG_MSIX_CONTROL_FUNC_MASK (0x1<<30)
|
|
|
|
|
#define PCICFG_MSIX_CONTROL_MSIX_ENABLE (0x1<<31)
|
|
|
|
|
|
2007-11-16 02:09:02 +08:00
|
|
|
#define PCICFG_DEVICE_CONTROL 0xb4
|
2009-02-12 16:36:15 +08:00
|
|
|
#define PCICFG_DEVICE_STATUS 0xb6
|
|
|
|
|
#define PCICFG_DEVICE_STATUS_CORR_ERR_DET (1<<0)
|
|
|
|
|
#define PCICFG_DEVICE_STATUS_NON_FATAL_ERR_DET (1<<1)
|
|
|
|
|
#define PCICFG_DEVICE_STATUS_FATAL_ERR_DET (1<<2)
|
|
|
|
|
#define PCICFG_DEVICE_STATUS_UNSUP_REQ_DET (1<<3)
|
|
|
|
|
#define PCICFG_DEVICE_STATUS_AUX_PWR_DET (1<<4)
|
|
|
|
|
#define PCICFG_DEVICE_STATUS_NO_PEND (1<<5)
|
2007-11-16 02:09:02 +08:00
|
|
|
#define PCICFG_LINK_CONTROL 0xbc
|
|
|
|
|
|
2008-06-24 11:27:52 +08:00
|
|
|
|
2007-11-16 02:09:02 +08:00
|
|
|
#define BAR_USTRORM_INTMEM 0x400000
|
|
|
|
|
#define BAR_CSTRORM_INTMEM 0x410000
|
|
|
|
|
#define BAR_XSTRORM_INTMEM 0x420000
|
|
|
|
|
#define BAR_TSTRORM_INTMEM 0x430000
|
|
|
|
|
|
2008-08-14 06:51:48 +08:00
|
|
|
/* for accessing the IGU in case of status block ACK */
|
2007-11-16 02:09:02 +08:00
|
|
|
#define BAR_IGU_INTMEM 0x440000
|
|
|
|
|
|
|
|
|
|
#define BAR_DOORBELL_OFFSET 0x800000
|
|
|
|
|
|
|
|
|
|
#define BAR_ME_REGISTER 0x450000
|
|
|
|
|
|
2008-08-14 06:51:48 +08:00
|
|
|
/* config_2 offset */
|
|
|
|
|
#define GRC_CONFIG_2_SIZE_REG 0x408
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE (0xfL<<0)
|
2007-11-16 02:09:02 +08:00
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_DISABLED (0L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_64K (1L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_128K (2L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_256K (3L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_512K (4L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_1M (5L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_2M (6L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_4M (7L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_8M (8L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_16M (9L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_32M (10L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_64M (11L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_128M (12L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_256M (13L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_512M (14L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR1_SIZE_1G (15L<<0)
|
2008-08-14 06:51:48 +08:00
|
|
|
#define PCI_CONFIG_2_BAR1_64ENA (1L<<4)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_RETRY (1L<<5)
|
|
|
|
|
#define PCI_CONFIG_2_CFG_CYCLE_RETRY (1L<<6)
|
|
|
|
|
#define PCI_CONFIG_2_FIRST_CFG_DONE (1L<<7)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE (0xffL<<8)
|
2007-11-16 02:09:02 +08:00
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED (0L<<8)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_2K (1L<<8)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_4K (2L<<8)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_8K (3L<<8)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_16K (4L<<8)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_32K (5L<<8)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_64K (6L<<8)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_128K (7L<<8)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_256K (8L<<8)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_512K (9L<<8)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_1M (10L<<8)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_2M (11L<<8)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_4M (12L<<8)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_8M (13L<<8)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_16M (14L<<8)
|
|
|
|
|
#define PCI_CONFIG_2_EXP_ROM_SIZE_32M (15L<<8)
|
2008-08-14 06:51:48 +08:00
|
|
|
#define PCI_CONFIG_2_BAR_PREFETCH (1L<<16)
|
|
|
|
|
#define PCI_CONFIG_2_RESERVED0 (0x7fffL<<17)
|
2007-11-16 02:09:02 +08:00
|
|
|
|
|
|
|
|
/* config_3 offset */
|
2008-08-14 06:51:48 +08:00
|
|
|
#define GRC_CONFIG_3_SIZE_REG 0x40c
|
|
|
|
|
#define PCI_CONFIG_3_STICKY_BYTE (0xffL<<0)
|
|
|
|
|
#define PCI_CONFIG_3_FORCE_PME (1L<<24)
|
|
|
|
|
#define PCI_CONFIG_3_PME_STATUS (1L<<25)
|
|
|
|
|
#define PCI_CONFIG_3_PME_ENABLE (1L<<26)
|
|
|
|
|
#define PCI_CONFIG_3_PM_STATE (0x3L<<27)
|
|
|
|
|
#define PCI_CONFIG_3_VAUX_PRESET (1L<<30)
|
|
|
|
|
#define PCI_CONFIG_3_PCI_POWER (1L<<31)
|
2007-11-16 02:09:02 +08:00
|
|
|
|
|
|
|
|
#define GRC_BAR2_CONFIG 0x4e0
|
2008-08-14 06:51:48 +08:00
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE (0xfL<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_DISABLED (0L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_64K (1L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_128K (2L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_256K (3L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_512K (4L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_1M (5L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_2M (6L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_4M (7L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_8M (8L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_16M (9L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_32M (10L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_64M (11L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_128M (12L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_256M (13L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_512M (14L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_SIZE_1G (15L<<0)
|
|
|
|
|
#define PCI_CONFIG_2_BAR2_64ENA (1L<<4)
|
|
|
|
|
|
|
|
|
|
#define PCI_PM_DATA_A 0x410
|
|
|
|
|
#define PCI_PM_DATA_B 0x414
|
|
|
|
|
#define PCI_ID_VAL1 0x434
|
|
|
|
|
#define PCI_ID_VAL2 0x438
|
2007-11-16 02:09:02 +08:00
|
|
|
|
2010-10-06 11:28:26 +08:00
|
|
|
#define PXPCS_TL_CONTROL_5 0x814
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_UNKNOWNTYPE_ERR_ATTN (1 << 29) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_BOUNDARY4K_ERR_ATTN (1 << 28) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_MRRS_ERR_ATTN (1 << 27) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_MPS_ERR_ATTN (1 << 26) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_TTX_BRIDGE_FORWARD_ERR (1 << 25) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_TTX_TXINTF_OVERFLOW (1 << 24) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_PHY_ERR_ATTN (1 << 23) /*RO*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_DL_ERR_ATTN (1 << 22) /*RO*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_TTX_ERR_NP_TAG_IN_USE (1 << 21) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_TRX_ERR_UNEXP_RTAG (1 << 20) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT1 (1 << 19) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 (1 << 18) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_ECRC1 (1 << 17) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_MALF_TLP1 (1 << 16) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW1 (1 << 15) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL1 (1 << 14) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT1 (1 << 13) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT1 (1 << 12) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_FC_PRTL1 (1 << 11) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_PSND_TLP1 (1 << 10) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT (1 << 9) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_UNSPPORT (1 << 8) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_ECRC (1 << 7) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_MALF_TLP (1 << 6) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW (1 << 5) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL (1 << 4) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT (1 << 3) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT (1 << 2) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_FC_PRTL (1 << 1) /*WC*/
|
|
|
|
|
#define PXPCS_TL_CONTROL_5_ERR_PSND_TLP (1 << 0) /*WC*/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT 0x854
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT4 (1 << 29) /* WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4\
|
|
|
|
|
(1 << 28) /* Unsupported Request Error Status in function4, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_ECRC4\
|
|
|
|
|
(1 << 27) /* ECRC Error TLP Status Status in function 4, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP4\
|
|
|
|
|
(1 << 26) /* Malformed TLP Status Status in function 4, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW4\
|
|
|
|
|
(1 << 25) /* Receiver Overflow Status Status in function 4, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen.. WC \
|
|
|
|
|
*/
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL4\
|
|
|
|
|
(1 << 24) /* Unexpected Completion Status Status in function 4, \
|
|
|
|
|
if set, generate pcie_err_attn output when this error is seen. WC \
|
|
|
|
|
*/
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT4\
|
|
|
|
|
(1 << 23) /* Receive UR Statusin function 4. If set, generate \
|
|
|
|
|
pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT4\
|
|
|
|
|
(1 << 22) /* Completer Timeout Status Status in function 4, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL4\
|
|
|
|
|
(1 << 21) /* Flow Control Protocol Error Status Status in \
|
|
|
|
|
function 4, if set, generate pcie_err_attn output when this error \
|
|
|
|
|
is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP4\
|
|
|
|
|
(1 << 20) /* Poisoned Error Status Status in function 4, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT3 (1 << 19) /* WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3\
|
|
|
|
|
(1 << 18) /* Unsupported Request Error Status in function3, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_ECRC3\
|
|
|
|
|
(1 << 17) /* ECRC Error TLP Status Status in function 3, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP3\
|
|
|
|
|
(1 << 16) /* Malformed TLP Status Status in function 3, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW3\
|
|
|
|
|
(1 << 15) /* Receiver Overflow Status Status in function 3, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen.. WC \
|
|
|
|
|
*/
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL3\
|
|
|
|
|
(1 << 14) /* Unexpected Completion Status Status in function 3, \
|
|
|
|
|
if set, generate pcie_err_attn output when this error is seen. WC \
|
|
|
|
|
*/
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT3\
|
|
|
|
|
(1 << 13) /* Receive UR Statusin function 3. If set, generate \
|
|
|
|
|
pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT3\
|
|
|
|
|
(1 << 12) /* Completer Timeout Status Status in function 3, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL3\
|
|
|
|
|
(1 << 11) /* Flow Control Protocol Error Status Status in \
|
|
|
|
|
function 3, if set, generate pcie_err_attn output when this error \
|
|
|
|
|
is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP3\
|
|
|
|
|
(1 << 10) /* Poisoned Error Status Status in function 3, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT2 (1 << 9) /* WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2\
|
|
|
|
|
(1 << 8) /* Unsupported Request Error Status for Function 2, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_ECRC2\
|
|
|
|
|
(1 << 7) /* ECRC Error TLP Status Status for Function 2, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP2\
|
|
|
|
|
(1 << 6) /* Malformed TLP Status Status for Function 2, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW2\
|
|
|
|
|
(1 << 5) /* Receiver Overflow Status Status for Function 2, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen.. WC \
|
|
|
|
|
*/
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL2\
|
|
|
|
|
(1 << 4) /* Unexpected Completion Status Status for Function 2, \
|
|
|
|
|
if set, generate pcie_err_attn output when this error is seen. WC \
|
|
|
|
|
*/
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT2\
|
|
|
|
|
(1 << 3) /* Receive UR Statusfor Function 2. If set, generate \
|
|
|
|
|
pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT2\
|
|
|
|
|
(1 << 2) /* Completer Timeout Status Status for Function 2, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL2\
|
|
|
|
|
(1 << 1) /* Flow Control Protocol Error Status Status for \
|
|
|
|
|
Function 2, if set, generate pcie_err_attn output when this error \
|
|
|
|
|
is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP2\
|
|
|
|
|
(1 << 0) /* Poisoned Error Status Status for Function 2, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT 0x85C
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT7 (1 << 29) /* WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7\
|
|
|
|
|
(1 << 28) /* Unsupported Request Error Status in function7, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_ECRC7\
|
|
|
|
|
(1 << 27) /* ECRC Error TLP Status Status in function 7, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP7\
|
|
|
|
|
(1 << 26) /* Malformed TLP Status Status in function 7, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW7\
|
|
|
|
|
(1 << 25) /* Receiver Overflow Status Status in function 7, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen.. WC \
|
|
|
|
|
*/
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL7\
|
|
|
|
|
(1 << 24) /* Unexpected Completion Status Status in function 7, \
|
|
|
|
|
if set, generate pcie_err_attn output when this error is seen. WC \
|
|
|
|
|
*/
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT7\
|
|
|
|
|
(1 << 23) /* Receive UR Statusin function 7. If set, generate \
|
|
|
|
|
pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT7\
|
|
|
|
|
(1 << 22) /* Completer Timeout Status Status in function 7, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL7\
|
|
|
|
|
(1 << 21) /* Flow Control Protocol Error Status Status in \
|
|
|
|
|
function 7, if set, generate pcie_err_attn output when this error \
|
|
|
|
|
is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP7\
|
|
|
|
|
(1 << 20) /* Poisoned Error Status Status in function 7, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT6 (1 << 19) /* WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6\
|
|
|
|
|
(1 << 18) /* Unsupported Request Error Status in function6, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_ECRC6\
|
|
|
|
|
(1 << 17) /* ECRC Error TLP Status Status in function 6, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP6\
|
|
|
|
|
(1 << 16) /* Malformed TLP Status Status in function 6, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW6\
|
|
|
|
|
(1 << 15) /* Receiver Overflow Status Status in function 6, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen.. WC \
|
|
|
|
|
*/
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL6\
|
|
|
|
|
(1 << 14) /* Unexpected Completion Status Status in function 6, \
|
|
|
|
|
if set, generate pcie_err_attn output when this error is seen. WC \
|
|
|
|
|
*/
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT6\
|
|
|
|
|
(1 << 13) /* Receive UR Statusin function 6. If set, generate \
|
|
|
|
|
pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT6\
|
|
|
|
|
(1 << 12) /* Completer Timeout Status Status in function 6, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL6\
|
|
|
|
|
(1 << 11) /* Flow Control Protocol Error Status Status in \
|
|
|
|
|
function 6, if set, generate pcie_err_attn output when this error \
|
|
|
|
|
is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP6\
|
|
|
|
|
(1 << 10) /* Poisoned Error Status Status in function 6, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT5 (1 << 9) /* WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5\
|
|
|
|
|
(1 << 8) /* Unsupported Request Error Status for Function 5, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_ECRC5\
|
|
|
|
|
(1 << 7) /* ECRC Error TLP Status Status for Function 5, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP5\
|
|
|
|
|
(1 << 6) /* Malformed TLP Status Status for Function 5, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW5\
|
|
|
|
|
(1 << 5) /* Receiver Overflow Status Status for Function 5, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen.. WC \
|
|
|
|
|
*/
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL5\
|
|
|
|
|
(1 << 4) /* Unexpected Completion Status Status for Function 5, \
|
|
|
|
|
if set, generate pcie_err_attn output when this error is seen. WC \
|
|
|
|
|
*/
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT5\
|
|
|
|
|
(1 << 3) /* Receive UR Statusfor Function 5. If set, generate \
|
|
|
|
|
pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT5\
|
|
|
|
|
(1 << 2) /* Completer Timeout Status Status for Function 5, if \
|
|
|
|
|
set, generate pcie_err_attn output when this error is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL5\
|
|
|
|
|
(1 << 1) /* Flow Control Protocol Error Status Status for \
|
|
|
|
|
Function 5, if set, generate pcie_err_attn output when this error \
|
|
|
|
|
is seen. WC */
|
|
|
|
|
#define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP5\
|
|
|
|
|
(1 << 0) /* Poisoned Error Status Status for Function 5, if set, \
|
|
|
|
|
generate pcie_err_attn output when this error is seen.. WC */
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define BAR_USTRORM_INTMEM 0x400000
|
|
|
|
|
#define BAR_CSTRORM_INTMEM 0x410000
|
|
|
|
|
#define BAR_XSTRORM_INTMEM 0x420000
|
|
|
|
|
#define BAR_TSTRORM_INTMEM 0x430000
|
|
|
|
|
|
|
|
|
|
/* for accessing the IGU in case of status block ACK */
|
|
|
|
|
#define BAR_IGU_INTMEM 0x440000
|
|
|
|
|
|
|
|
|
|
#define BAR_DOORBELL_OFFSET 0x800000
|
|
|
|
|
|
|
|
|
|
#define BAR_ME_REGISTER 0x450000
|
|
|
|
|
#define ME_REG_PF_NUM_SHIFT 0
|
|
|
|
|
#define ME_REG_PF_NUM\
|
|
|
|
|
(7L<<ME_REG_PF_NUM_SHIFT) /* Relative PF Num */
|
|
|
|
|
#define ME_REG_VF_VALID (1<<8)
|
|
|
|
|
#define ME_REG_VF_NUM_SHIFT 9
|
|
|
|
|
#define ME_REG_VF_NUM_MASK (0x3f<<ME_REG_VF_NUM_SHIFT)
|
|
|
|
|
#define ME_REG_VF_ERR (0x1<<3)
|
|
|
|
|
#define ME_REG_ABS_PF_NUM_SHIFT 16
|
|
|
|
|
#define ME_REG_ABS_PF_NUM\
|
|
|
|
|
(7L<<ME_REG_ABS_PF_NUM_SHIFT) /* Absolute PF Num */
|
|
|
|
|
|
2007-11-16 02:09:02 +08:00
|
|
|
|
2009-11-06 01:18:07 +08:00
|
|
|
#define MDIO_REG_BANK_CL73_IEEEB0 0x0
|
|
|
|
|
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200
|
|
|
|
|
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN 0x1000
|
|
|
|
|
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000
|
|
|
|
|
|
2009-11-06 01:18:07 +08:00
|
|
|
#define MDIO_REG_BANK_CL73_IEEEB1 0x10
|
|
|
|
|
#define MDIO_CL73_IEEEB1_AN_ADV1 0x00
|
|
|
|
|
#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE 0x0400
|
|
|
|
|
#define MDIO_CL73_IEEEB1_AN_ADV1_ASYMMETRIC 0x0800
|
|
|
|
|
#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH 0x0C00
|
|
|
|
|
#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK 0x0C00
|
|
|
|
|
#define MDIO_CL73_IEEEB1_AN_ADV2 0x01
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000
|
|
|
|
|
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020
|
|
|
|
|
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040
|
|
|
|
|
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR 0x0080
|
2009-11-06 01:18:07 +08:00
|
|
|
#define MDIO_CL73_IEEEB1_AN_LP_ADV1 0x03
|
|
|
|
|
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE 0x0400
|
|
|
|
|
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_ASYMMETRIC 0x0800
|
|
|
|
|
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_BOTH 0x0C00
|
|
|
|
|
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK 0x0C00
|
2007-11-16 02:09:02 +08:00
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_RX0 0x80b0
|
2009-08-12 16:23:04 +08:00
|
|
|
#define MDIO_RX0_RX_STATUS 0x10
|
|
|
|
|
#define MDIO_RX0_RX_STATUS_SIGDET 0x8000
|
|
|
|
|
#define MDIO_RX0_RX_STATUS_RX_SEQ_DONE 0x1000
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MDIO_RX0_RX_EQ_BOOST 0x1c
|
|
|
|
|
#define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
|
|
|
|
|
#define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL 0x10
|
|
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_RX1 0x80c0
|
|
|
|
|
#define MDIO_RX1_RX_EQ_BOOST 0x1c
|
|
|
|
|
#define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
|
|
|
|
|
#define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL 0x10
|
|
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_RX2 0x80d0
|
|
|
|
|
#define MDIO_RX2_RX_EQ_BOOST 0x1c
|
|
|
|
|
#define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
|
|
|
|
|
#define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL 0x10
|
|
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_RX3 0x80e0
|
|
|
|
|
#define MDIO_RX3_RX_EQ_BOOST 0x1c
|
|
|
|
|
#define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
|
|
|
|
|
#define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL 0x10
|
|
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_RX_ALL 0x80f0
|
|
|
|
|
#define MDIO_RX_ALL_RX_EQ_BOOST 0x1c
|
|
|
|
|
#define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10
|
2007-11-16 02:09:02 +08:00
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_TX0 0x8060
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER 0x17
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
|
|
|
|
|
|
2009-02-12 16:37:14 +08:00
|
|
|
#define MDIO_REG_BANK_TX1 0x8070
|
|
|
|
|
#define MDIO_TX1_TX_DRIVER 0x17
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
|
|
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_TX2 0x8080
|
|
|
|
|
#define MDIO_TX2_TX_DRIVER 0x17
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
|
|
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_TX3 0x8090
|
|
|
|
|
#define MDIO_TX3_TX_DRIVER 0x17
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
|
|
|
|
|
#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
|
|
|
|
|
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MDIO_REG_BANK_XGXS_BLOCK0 0x8000
|
|
|
|
|
#define MDIO_BLOCK0_XGXS_CONTROL 0x10
|
|
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_XGXS_BLOCK1 0x8010
|
|
|
|
|
#define MDIO_BLOCK1_LANE_CTRL0 0x15
|
|
|
|
|
#define MDIO_BLOCK1_LANE_CTRL1 0x16
|
|
|
|
|
#define MDIO_BLOCK1_LANE_CTRL2 0x17
|
|
|
|
|
#define MDIO_BLOCK1_LANE_PRBS 0x19
|
|
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_XGXS_BLOCK2 0x8100
|
|
|
|
|
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10
|
|
|
|
|
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000
|
|
|
|
|
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14
|
2008-02-29 03:51:50 +08:00
|
|
|
#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001
|
|
|
|
|
#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15
|
2007-11-16 02:09:02 +08:00
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_GP_STATUS 0x8120
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00
|
|
|
|
|
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00
|
2007-11-16 02:09:02 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130
|
2009-11-06 01:18:12 +08:00
|
|
|
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS 0x10
|
|
|
|
|
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK 0x8000
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11
|
|
|
|
|
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1
|
|
|
|
|
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13
|
|
|
|
|
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1)
|
2007-11-16 02:09:02 +08:00
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_SERDES_DIGITAL 0x8300
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14
|
2010-09-07 19:41:20 +08:00
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SGMII 0x0001
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_LINK 0x0002
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000
|
2009-11-06 01:18:12 +08:00
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2 0x15
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED 0x0002
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1 0x18
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008
|
|
|
|
|
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009
|
2007-11-16 02:09:02 +08:00
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_OVER_1G 0x8320
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_OVER_1G_DIGCTL_3_4 0x14
|
|
|
|
|
#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0
|
|
|
|
|
#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5
|
|
|
|
|
#define MDIO_OVER_1G_UP1 0x19
|
|
|
|
|
#define MDIO_OVER_1G_UP1_2_5G 0x0001
|
|
|
|
|
#define MDIO_OVER_1G_UP1_5G 0x0002
|
|
|
|
|
#define MDIO_OVER_1G_UP1_6G 0x0004
|
|
|
|
|
#define MDIO_OVER_1G_UP1_10G 0x0010
|
|
|
|
|
#define MDIO_OVER_1G_UP1_10GH 0x0008
|
|
|
|
|
#define MDIO_OVER_1G_UP1_12G 0x0020
|
|
|
|
|
#define MDIO_OVER_1G_UP1_12_5G 0x0040
|
|
|
|
|
#define MDIO_OVER_1G_UP1_13G 0x0080
|
|
|
|
|
#define MDIO_OVER_1G_UP1_15G 0x0100
|
|
|
|
|
#define MDIO_OVER_1G_UP1_16G 0x0200
|
|
|
|
|
#define MDIO_OVER_1G_UP2 0x1A
|
|
|
|
|
#define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007
|
|
|
|
|
#define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038
|
|
|
|
|
#define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0
|
|
|
|
|
#define MDIO_OVER_1G_UP3 0x1B
|
|
|
|
|
#define MDIO_OVER_1G_UP3_HIGIG2 0x0001
|
|
|
|
|
#define MDIO_OVER_1G_LP_UP1 0x1C
|
|
|
|
|
#define MDIO_OVER_1G_LP_UP2 0x1D
|
|
|
|
|
#define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff
|
|
|
|
|
#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780
|
|
|
|
|
#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7
|
|
|
|
|
#define MDIO_OVER_1G_LP_UP3 0x1E
|
2007-11-16 02:09:02 +08:00
|
|
|
|
2009-08-12 16:23:04 +08:00
|
|
|
#define MDIO_REG_BANK_REMOTE_PHY 0x8330
|
|
|
|
|
#define MDIO_REMOTE_PHY_MISC_RX_STATUS 0x10
|
|
|
|
|
#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG 0x0010
|
|
|
|
|
#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG 0x0600
|
|
|
|
|
|
2007-11-16 02:09:02 +08:00
|
|
|
#define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10
|
|
|
|
|
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001
|
|
|
|
|
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002
|
|
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_CL73_USERB0 0x8370
|
2009-08-12 16:23:04 +08:00
|
|
|
#define MDIO_CL73_USERB0_CL73_UCTRL 0x10
|
|
|
|
|
#define MDIO_CL73_USERB0_CL73_UCTRL_USTAT1_MUXSEL 0x0002
|
|
|
|
|
#define MDIO_CL73_USERB0_CL73_USTAT1 0x11
|
|
|
|
|
#define MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK 0x0100
|
|
|
|
|
#define MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37 0x0400
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12
|
|
|
|
|
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000
|
|
|
|
|
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000
|
|
|
|
|
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000
|
|
|
|
|
#define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14
|
|
|
|
|
#define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001
|
|
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_AER_BLOCK 0xFFD0
|
|
|
|
|
#define MDIO_AER_BLOCK_AER_REG 0x1E
|
|
|
|
|
|
|
|
|
|
#define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0
|
|
|
|
|
#define MDIO_COMBO_IEEE0_MII_CONTROL 0x10
|
|
|
|
|
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040
|
|
|
|
|
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000
|
|
|
|
|
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000
|
|
|
|
|
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040
|
|
|
|
|
#define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100
|
|
|
|
|
#define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200
|
|
|
|
|
#define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000
|
|
|
|
|
#define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000
|
|
|
|
|
#define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000
|
|
|
|
|
#define MDIO_COMBO_IEEE0_MII_STATUS 0x11
|
|
|
|
|
#define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004
|
|
|
|
|
#define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE 0x0000
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH 0x0180
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020
|
|
|
|
|
/*WhenthelinkpartnerisinSGMIImode(bit0=1),then
|
|
|
|
|
bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge.
|
|
|
|
|
Theotherbitsarereservedandshouldbezero*/
|
|
|
|
|
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define MDIO_PMA_DEVAD 0x1
|
|
|
|
|
/*ieee*/
|
|
|
|
|
#define MDIO_PMA_REG_CTRL 0x0
|
|
|
|
|
#define MDIO_PMA_REG_STATUS 0x1
|
|
|
|
|
#define MDIO_PMA_REG_10G_CTRL2 0x7
|
|
|
|
|
#define MDIO_PMA_REG_RX_SD 0xa
|
|
|
|
|
/*bcm*/
|
|
|
|
|
#define MDIO_PMA_REG_BCM_CTRL 0x0096
|
|
|
|
|
#define MDIO_PMA_REG_FEC_CTRL 0x00ab
|
|
|
|
|
#define MDIO_PMA_REG_RX_ALARM_CTRL 0x9000
|
|
|
|
|
#define MDIO_PMA_REG_LASI_CTRL 0x9002
|
|
|
|
|
#define MDIO_PMA_REG_RX_ALARM 0x9003
|
|
|
|
|
#define MDIO_PMA_REG_TX_ALARM 0x9004
|
|
|
|
|
#define MDIO_PMA_REG_LASI_STATUS 0x9005
|
|
|
|
|
#define MDIO_PMA_REG_PHY_IDENTIFIER 0xc800
|
|
|
|
|
#define MDIO_PMA_REG_DIGITAL_CTRL 0xc808
|
|
|
|
|
#define MDIO_PMA_REG_DIGITAL_STATUS 0xc809
|
|
|
|
|
#define MDIO_PMA_REG_TX_POWER_DOWN 0xca02
|
|
|
|
|
#define MDIO_PMA_REG_CMU_PLL_BYPASS 0xca09
|
|
|
|
|
#define MDIO_PMA_REG_MISC_CTRL 0xca0a
|
|
|
|
|
#define MDIO_PMA_REG_GEN_CTRL 0xca10
|
|
|
|
|
#define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP 0x0188
|
|
|
|
|
#define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET 0x018a
|
2008-08-14 06:55:28 +08:00
|
|
|
#define MDIO_PMA_REG_M8051_MSGIN_REG 0xca12
|
|
|
|
|
#define MDIO_PMA_REG_M8051_MSGOUT_REG 0xca13
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_PMA_REG_ROM_VER1 0xca19
|
|
|
|
|
#define MDIO_PMA_REG_ROM_VER2 0xca1a
|
|
|
|
|
#define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b
|
|
|
|
|
#define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d
|
2009-07-21 13:47:47 +08:00
|
|
|
#define MDIO_PMA_REG_PLL_CTRL 0xca1e
|
2009-02-12 16:36:55 +08:00
|
|
|
#define MDIO_PMA_REG_MISC_CTRL0 0xca23
|
|
|
|
|
#define MDIO_PMA_REG_LRM_MODE 0xca3f
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46
|
|
|
|
|
#define MDIO_PMA_REG_MISC_CTRL1 0xca85
|
|
|
|
|
|
2009-07-21 13:47:47 +08:00
|
|
|
#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL 0x8000
|
|
|
|
|
#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK 0x000c
|
|
|
|
|
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE 0x0000
|
|
|
|
|
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE 0x0004
|
|
|
|
|
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IN_PROGRESS 0x0008
|
|
|
|
|
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_FAILED 0x000c
|
|
|
|
|
#define MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT 0x8002
|
|
|
|
|
#define MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR 0x8003
|
2009-02-12 16:36:55 +08:00
|
|
|
#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF 0xc820
|
|
|
|
|
#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff
|
|
|
|
|
#define MDIO_PMA_REG_8726_TX_CTRL1 0xca01
|
|
|
|
|
#define MDIO_PMA_REG_8726_TX_CTRL2 0xca05
|
|
|
|
|
|
2009-07-21 13:47:47 +08:00
|
|
|
#define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR 0x8005
|
|
|
|
|
#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF 0x8007
|
|
|
|
|
#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff
|
|
|
|
|
#define MDIO_PMA_REG_8727_TX_CTRL1 0xca02
|
|
|
|
|
#define MDIO_PMA_REG_8727_TX_CTRL2 0xca05
|
|
|
|
|
#define MDIO_PMA_REG_8727_PCS_OPT_CTRL 0xc808
|
|
|
|
|
#define MDIO_PMA_REG_8727_GPIO_CTRL 0xc80e
|
2010-09-07 19:40:50 +08:00
|
|
|
#define MDIO_PMA_REG_8727_PCS_GP 0xc842
|
|
|
|
|
|
|
|
|
|
#define MDIO_AN_REG_8727_MISC_CTRL 0x8309
|
2009-02-12 16:36:55 +08:00
|
|
|
|
2009-02-12 16:37:16 +08:00
|
|
|
#define MDIO_PMA_REG_8073_CHIP_REV 0xc801
|
|
|
|
|
#define MDIO_PMA_REG_8073_SPEED_LINK_STATUS 0xc820
|
|
|
|
|
#define MDIO_PMA_REG_8073_XAUI_WA 0xc841
|
2010-09-07 19:40:50 +08:00
|
|
|
#define MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL 0xcd08
|
2009-02-12 16:37:16 +08:00
|
|
|
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_PMA_REG_7101_RESET 0xc000
|
|
|
|
|
#define MDIO_PMA_REG_7107_LED_CNTL 0xc007
|
2010-09-07 19:40:50 +08:00
|
|
|
#define MDIO_PMA_REG_7107_LINK_LED_CNTL 0xc009
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_PMA_REG_7101_VER1 0xc026
|
|
|
|
|
#define MDIO_PMA_REG_7101_VER2 0xc027
|
|
|
|
|
|
2010-09-07 19:41:23 +08:00
|
|
|
#define MDIO_PMA_REG_8481_PMD_SIGNAL 0xa811
|
|
|
|
|
#define MDIO_PMA_REG_8481_LED1_MASK 0xa82c
|
|
|
|
|
#define MDIO_PMA_REG_8481_LED2_MASK 0xa82f
|
|
|
|
|
#define MDIO_PMA_REG_8481_LED3_MASK 0xa832
|
|
|
|
|
#define MDIO_PMA_REG_8481_LED3_BLINK 0xa834
|
|
|
|
|
#define MDIO_PMA_REG_8481_LED5_MASK 0xa838
|
|
|
|
|
#define MDIO_PMA_REG_8481_SIGNAL_MASK 0xa835
|
|
|
|
|
#define MDIO_PMA_REG_8481_LINK_SIGNAL 0xa83b
|
|
|
|
|
#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK 0x800
|
|
|
|
|
#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT 11
|
2009-08-12 16:22:16 +08:00
|
|
|
|
2008-06-24 11:27:52 +08:00
|
|
|
|
|
|
|
|
#define MDIO_WIS_DEVAD 0x2
|
|
|
|
|
/*bcm*/
|
|
|
|
|
#define MDIO_WIS_REG_LASI_CNTL 0x9002
|
|
|
|
|
#define MDIO_WIS_REG_LASI_STATUS 0x9005
|
|
|
|
|
|
|
|
|
|
#define MDIO_PCS_DEVAD 0x3
|
|
|
|
|
#define MDIO_PCS_REG_STATUS 0x0020
|
|
|
|
|
#define MDIO_PCS_REG_LASI_STATUS 0x9005
|
|
|
|
|
#define MDIO_PCS_REG_7101_DSP_ACCESS 0xD000
|
|
|
|
|
#define MDIO_PCS_REG_7101_SPI_MUX 0xD008
|
|
|
|
|
#define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A
|
|
|
|
|
#define MDIO_PCS_REG_7101_SPI_RESET_BIT (5)
|
|
|
|
|
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A
|
|
|
|
|
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6)
|
|
|
|
|
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD (0xC7)
|
|
|
|
|
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2)
|
|
|
|
|
#define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028
|
|
|
|
|
|
2007-11-16 02:09:02 +08:00
|
|
|
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_XS_DEVAD 0x4
|
|
|
|
|
#define MDIO_XS_PLL_SEQUENCER 0x8000
|
|
|
|
|
#define MDIO_XS_SFX7101_XGXS_TEST1 0xc00a
|
2007-11-16 02:09:02 +08:00
|
|
|
|
2009-02-12 16:36:55 +08:00
|
|
|
#define MDIO_XS_8706_REG_BANK_RX0 0x80bc
|
|
|
|
|
#define MDIO_XS_8706_REG_BANK_RX1 0x80cc
|
|
|
|
|
#define MDIO_XS_8706_REG_BANK_RX2 0x80dc
|
|
|
|
|
#define MDIO_XS_8706_REG_BANK_RX3 0x80ec
|
|
|
|
|
#define MDIO_XS_8706_REG_BANK_RXA 0x80fc
|
|
|
|
|
|
2010-09-07 19:41:20 +08:00
|
|
|
#define MDIO_XS_REG_8073_RX_CTRL_PCIE 0x80FA
|
|
|
|
|
|
2008-06-24 11:27:52 +08:00
|
|
|
#define MDIO_AN_DEVAD 0x7
|
|
|
|
|
/*ieee*/
|
|
|
|
|
#define MDIO_AN_REG_CTRL 0x0000
|
|
|
|
|
#define MDIO_AN_REG_STATUS 0x0001
|
|
|
|
|
#define MDIO_AN_REG_STATUS_AN_COMPLETE 0x0020
|
|
|
|
|
#define MDIO_AN_REG_ADV_PAUSE 0x0010
|
|
|
|
|
#define MDIO_AN_REG_ADV_PAUSE_PAUSE 0x0400
|
|
|
|
|
#define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC 0x0800
|
|
|
|
|
#define MDIO_AN_REG_ADV_PAUSE_BOTH 0x0C00
|
|
|
|
|
#define MDIO_AN_REG_ADV_PAUSE_MASK 0x0C00
|
|
|
|
|
#define MDIO_AN_REG_ADV 0x0011
|
|
|
|
|
#define MDIO_AN_REG_ADV2 0x0012
|
|
|
|
|
#define MDIO_AN_REG_LP_AUTO_NEG 0x0013
|
|
|
|
|
#define MDIO_AN_REG_MASTER_STATUS 0x0021
|
|
|
|
|
/*bcm*/
|
|
|
|
|
#define MDIO_AN_REG_LINK_STATUS 0x8304
|
|
|
|
|
#define MDIO_AN_REG_CL37_CL73 0x8370
|
|
|
|
|
#define MDIO_AN_REG_CL37_AN 0xffe0
|
2008-08-14 06:56:17 +08:00
|
|
|
#define MDIO_AN_REG_CL37_FC_LD 0xffe4
|
|
|
|
|
#define MDIO_AN_REG_CL37_FC_LP 0xffe5
|
2007-11-16 02:09:02 +08:00
|
|
|
|
2009-02-12 16:37:16 +08:00
|
|
|
#define MDIO_AN_REG_8073_2_5G 0x8329
|
2010-09-07 19:40:50 +08:00
|
|
|
#define MDIO_AN_REG_8073_BAM 0x8350
|
2009-02-12 16:37:16 +08:00
|
|
|
|
2010-09-01 17:51:25 +08:00
|
|
|
#define MDIO_AN_REG_8481_10GBASE_T_AN_CTRL 0x0020
|
2009-08-12 16:22:16 +08:00
|
|
|
#define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0
|
2010-09-07 19:40:50 +08:00
|
|
|
#define MDIO_AN_REG_8481_LEGACY_MII_STATUS 0xffe1
|
2009-08-12 16:22:16 +08:00
|
|
|
#define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4
|
2010-09-07 19:40:50 +08:00
|
|
|
#define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION 0xffe6
|
2009-08-12 16:22:16 +08:00
|
|
|
#define MDIO_AN_REG_8481_1000T_CTRL 0xffe9
|
|
|
|
|
#define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5
|
|
|
|
|
#define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7
|
2010-09-01 17:51:25 +08:00
|
|
|
#define MDIO_AN_REG_8481_AUX_CTRL 0xfff8
|
2009-08-12 16:22:16 +08:00
|
|
|
#define MDIO_AN_REG_8481_LEGACY_SHADOW 0xfffc
|
2007-11-16 02:09:02 +08:00
|
|
|
|
2010-09-07 19:41:20 +08:00
|
|
|
/* BCM84823 only */
|
|
|
|
|
#define MDIO_CTL_DEVAD 0x1e
|
|
|
|
|
#define MDIO_CTL_REG_84823_MEDIA 0x401a
|
|
|
|
|
#define MDIO_CTL_REG_84823_MEDIA_MAC_MASK 0x0018
|
|
|
|
|
/* These pins configure the BCM84823 interface to MAC after reset. */
|
|
|
|
|
#define MDIO_CTL_REG_84823_CTRL_MAC_XFI 0x0008
|
|
|
|
|
#define MDIO_CTL_REG_84823_MEDIA_MAC_XAUI_M 0x0010
|
|
|
|
|
/* These pins configure the BCM84823 interface to Line after reset. */
|
|
|
|
|
#define MDIO_CTL_REG_84823_MEDIA_LINE_MASK 0x0060
|
|
|
|
|
#define MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L 0x0020
|
|
|
|
|
#define MDIO_CTL_REG_84823_MEDIA_LINE_XFI 0x0040
|
|
|
|
|
/* When this pin is active high during reset, 10GBASE-T core is power
|
|
|
|
|
* down, When it is active low the 10GBASE-T is power up
|
|
|
|
|
*/
|
|
|
|
|
#define MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN 0x0080
|
|
|
|
|
#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK 0x0100
|
|
|
|
|
#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER 0x0000
|
|
|
|
|
#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER 0x0100
|
|
|
|
|
#define MDIO_CTL_REG_84823_MEDIA_FIBER_1G 0x1000
|
|
|
|
|
|
|
|
|
|
|
2008-06-24 11:27:52 +08:00
|
|
|
#define IGU_FUNC_BASE 0x0400
|
2007-11-16 02:09:02 +08:00
|
|
|
|
2008-06-24 11:27:52 +08:00
|
|
|
#define IGU_ADDR_MSIX 0x0000
|
|
|
|
|
#define IGU_ADDR_INT_ACK 0x0200
|
|
|
|
|
#define IGU_ADDR_PROD_UPD 0x0201
|
|
|
|
|
#define IGU_ADDR_ATTN_BITS_UPD 0x0202
|
|
|
|
|
#define IGU_ADDR_ATTN_BITS_SET 0x0203
|
|
|
|
|
#define IGU_ADDR_ATTN_BITS_CLR 0x0204
|
|
|
|
|
#define IGU_ADDR_COALESCE_NOW 0x0205
|
|
|
|
|
#define IGU_ADDR_SIMD_MASK 0x0206
|
|
|
|
|
#define IGU_ADDR_SIMD_NOMASK 0x0207
|
|
|
|
|
#define IGU_ADDR_MSI_CTL 0x0210
|
|
|
|
|
#define IGU_ADDR_MSI_ADDR_LO 0x0211
|
|
|
|
|
#define IGU_ADDR_MSI_ADDR_HI 0x0212
|
|
|
|
|
#define IGU_ADDR_MSI_DATA 0x0213
|
2007-11-16 02:09:02 +08:00
|
|
|
|
2008-06-24 11:27:52 +08:00
|
|
|
#define IGU_INT_ENABLE 0
|
|
|
|
|
#define IGU_INT_DISABLE 1
|
|
|
|
|
#define IGU_INT_NOP 2
|
|
|
|
|
#define IGU_INT_NOP2 3
|
2008-02-29 03:51:50 +08:00
|
|
|
|
2010-10-06 11:28:26 +08:00
|
|
|
#define IGU_USE_REGISTER_ustorm_type_0_sb_cleanup 0
|
|
|
|
|
#define IGU_USE_REGISTER_ustorm_type_1_sb_cleanup 1
|
|
|
|
|
#define IGU_USE_REGISTER_cstorm_type_0_sb_cleanup 2
|
|
|
|
|
#define IGU_USE_REGISTER_cstorm_type_1_sb_cleanup 3
|
|
|
|
|
|
2008-08-14 06:51:48 +08:00
|
|
|
#define COMMAND_REG_INT_ACK 0x0
|
|
|
|
|
#define COMMAND_REG_PROD_UPD 0x4
|
|
|
|
|
#define COMMAND_REG_ATTN_BITS_UPD 0x8
|
|
|
|
|
#define COMMAND_REG_ATTN_BITS_SET 0xc
|
|
|
|
|
#define COMMAND_REG_ATTN_BITS_CLR 0x10
|
|
|
|
|
#define COMMAND_REG_COALESCE_NOW 0x14
|
|
|
|
|
#define COMMAND_REG_SIMD_MASK 0x18
|
|
|
|
|
#define COMMAND_REG_SIMD_NOMASK 0x1c
|
|
|
|
|
|
2007-11-16 02:09:02 +08:00
|
|
|
|
2009-08-12 16:24:14 +08:00
|
|
|
#define IGU_MEM_BASE 0x0000
|
|
|
|
|
|
|
|
|
|
#define IGU_MEM_MSIX_BASE 0x0000
|
|
|
|
|
#define IGU_MEM_MSIX_UPPER 0x007f
|
|
|
|
|
#define IGU_MEM_MSIX_RESERVED_UPPER 0x01ff
|
|
|
|
|
|
|
|
|
|
#define IGU_MEM_PBA_MSIX_BASE 0x0200
|
|
|
|
|
#define IGU_MEM_PBA_MSIX_UPPER 0x0200
|
|
|
|
|
|
|
|
|
|
#define IGU_CMD_BACKWARD_COMP_PROD_UPD 0x0201
|
|
|
|
|
#define IGU_MEM_PBA_MSIX_RESERVED_UPPER 0x03ff
|
|
|
|
|
|
|
|
|
|
#define IGU_CMD_INT_ACK_BASE 0x0400
|
|
|
|
|
#define IGU_CMD_INT_ACK_UPPER\
|
|
|
|
|
(IGU_CMD_INT_ACK_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
|
|
|
|
|
#define IGU_CMD_INT_ACK_RESERVED_UPPER 0x04ff
|
|
|
|
|
|
|
|
|
|
#define IGU_CMD_E2_PROD_UPD_BASE 0x0500
|
|
|
|
|
#define IGU_CMD_E2_PROD_UPD_UPPER\
|
|
|
|
|
(IGU_CMD_E2_PROD_UPD_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
|
|
|
|
|
#define IGU_CMD_E2_PROD_UPD_RESERVED_UPPER 0x059f
|
|
|
|
|
|
|
|
|
|
#define IGU_CMD_ATTN_BIT_UPD_UPPER 0x05a0
|
|
|
|
|
#define IGU_CMD_ATTN_BIT_SET_UPPER 0x05a1
|
|
|
|
|
#define IGU_CMD_ATTN_BIT_CLR_UPPER 0x05a2
|
|
|
|
|
|
|
|
|
|
#define IGU_REG_SISR_MDPC_WMASK_UPPER 0x05a3
|
|
|
|
|
#define IGU_REG_SISR_MDPC_WMASK_LSB_UPPER 0x05a4
|
|
|
|
|
#define IGU_REG_SISR_MDPC_WMASK_MSB_UPPER 0x05a5
|
|
|
|
|
#define IGU_REG_SISR_MDPC_WOMASK_UPPER 0x05a6
|
|
|
|
|
|
|
|
|
|
#define IGU_REG_RESERVED_UPPER 0x05ff
|
2010-10-06 11:28:26 +08:00
|
|
|
/* Fields of IGU PF CONFIGRATION REGISTER */
|
|
|
|
|
#define IGU_PF_CONF_FUNC_EN (0x1<<0) /* function enable */
|
|
|
|
|
#define IGU_PF_CONF_MSI_MSIX_EN (0x1<<1) /* MSI/MSIX enable */
|
|
|
|
|
#define IGU_PF_CONF_INT_LINE_EN (0x1<<2) /* INT enable */
|
|
|
|
|
#define IGU_PF_CONF_ATTN_BIT_EN (0x1<<3) /* attention enable */
|
|
|
|
|
#define IGU_PF_CONF_SINGLE_ISR_EN (0x1<<4) /* single ISR mode enable */
|
|
|
|
|
#define IGU_PF_CONF_SIMD_MODE (0x1<<5) /* simd all ones mode */
|
|
|
|
|
|
|
|
|
|
/* Fields of IGU VF CONFIGRATION REGISTER */
|
|
|
|
|
#define IGU_VF_CONF_FUNC_EN (0x1<<0) /* function enable */
|
|
|
|
|
#define IGU_VF_CONF_MSI_MSIX_EN (0x1<<1) /* MSI/MSIX enable */
|
|
|
|
|
#define IGU_VF_CONF_PARENT_MASK (0x3<<2) /* Parent PF */
|
|
|
|
|
#define IGU_VF_CONF_PARENT_SHIFT 2 /* Parent PF */
|
|
|
|
|
#define IGU_VF_CONF_SINGLE_ISR_EN (0x1<<4) /* single ISR mode enable */
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define IGU_BC_DSB_NUM_SEGS 5
|
|
|
|
|
#define IGU_BC_NDSB_NUM_SEGS 2
|
|
|
|
|
#define IGU_NORM_DSB_NUM_SEGS 2
|
|
|
|
|
#define IGU_NORM_NDSB_NUM_SEGS 1
|
|
|
|
|
#define IGU_BC_BASE_DSB_PROD 128
|
|
|
|
|
#define IGU_NORM_BASE_DSB_PROD 136
|
|
|
|
|
|
|
|
|
|
#define IGU_CTRL_CMD_TYPE_WR\
|
|
|
|
|
1
|
|
|
|
|
#define IGU_CTRL_CMD_TYPE_RD\
|
|
|
|
|
0
|
|
|
|
|
|
|
|
|
|
#define IGU_SEG_ACCESS_NORM 0
|
|
|
|
|
#define IGU_SEG_ACCESS_DEF 1
|
|
|
|
|
#define IGU_SEG_ACCESS_ATTN 2
|
|
|
|
|
|
|
|
|
|
/* FID (if VF - [6] = 0; [5:0] = VF number; if PF - [6] = 1; \
|
|
|
|
|
[5:2] = 0; [1:0] = PF number) */
|
|
|
|
|
#define IGU_FID_ENCODE_IS_PF (0x1<<6)
|
|
|
|
|
#define IGU_FID_ENCODE_IS_PF_SHIFT 6
|
|
|
|
|
#define IGU_FID_VF_NUM_MASK (0x3f)
|
|
|
|
|
#define IGU_FID_PF_NUM_MASK (0x7)
|
|
|
|
|
|
|
|
|
|
#define IGU_REG_MAPPING_MEMORY_VALID (1<<0)
|
|
|
|
|
#define IGU_REG_MAPPING_MEMORY_VECTOR_MASK (0x3F<<1)
|
|
|
|
|
#define IGU_REG_MAPPING_MEMORY_VECTOR_SHIFT 1
|
|
|
|
|
#define IGU_REG_MAPPING_MEMORY_FID_MASK (0x7F<<7)
|
|
|
|
|
#define IGU_REG_MAPPING_MEMORY_FID_SHIFT 7
|
2009-08-12 16:24:14 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
#define CDU_REGION_NUMBER_XCM_AG 2
|
|
|
|
|
#define CDU_REGION_NUMBER_UCM_AG 4
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* String-to-compress [31:8] = CID (all 24 bits)
|
|
|
|
|
* String-to-compress [7:4] = Region
|
|
|
|
|
* String-to-compress [3:0] = Type
|
|
|
|
|
*/
|
|
|
|
|
#define CDU_VALID_DATA(_cid, _region, _type)\
|
|
|
|
|
(((_cid) << 8) | (((_region)&0xf)<<4) | (((_type)&0xf)))
|
|
|
|
|
#define CDU_CRC8(_cid, _region, _type)\
|
|
|
|
|
(calc_crc8(CDU_VALID_DATA(_cid, _region, _type), 0xff))
|
|
|
|
|
#define CDU_RSRVD_VALUE_TYPE_A(_cid, _region, _type)\
|
|
|
|
|
(0x80 | ((CDU_CRC8(_cid, _region, _type)) & 0x7f))
|
|
|
|
|
#define CDU_RSRVD_VALUE_TYPE_B(_crc, _type)\
|
|
|
|
|
(0x80 | ((_type)&0xf << 3) | ((CDU_CRC8(_cid, _region, _type)) & 0x7))
|
|
|
|
|
#define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) ((_val) & ~0x80)
|
|
|
|
|
|
|
|
|
|
/******************************************************************************
|
|
|
|
|
* Description:
|
|
|
|
|
* Calculates crc 8 on a word value: polynomial 0-1-2-8
|
|
|
|
|
* Code was translated from Verilog.
|
|
|
|
|
* Return:
|
|
|
|
|
*****************************************************************************/
|
|
|
|
|
static inline u8 calc_crc8(u32 data, u8 crc)
|
|
|
|
|
{
|
|
|
|
|
u8 D[32];
|
|
|
|
|
u8 NewCRC[8];
|
|
|
|
|
u8 C[8];
|
|
|
|
|
u8 crc_res;
|
|
|
|
|
u8 i;
|
|
|
|
|
|
|
|
|
|
/* split the data into 31 bits */
|
|
|
|
|
for (i = 0; i < 32; i++) {
|
|
|
|
|
D[i] = (u8)(data & 1);
|
|
|
|
|
data = data >> 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* split the crc into 8 bits */
|
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
|
|
|
C[i] = crc & 1;
|
|
|
|
|
crc = crc >> 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
|
|
|
|
|
D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
|
|
|
|
|
C[6] ^ C[7];
|
|
|
|
|
NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
|
|
|
|
|
D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
|
|
|
|
|
D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^
|
|
|
|
|
C[6];
|
|
|
|
|
NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
|
|
|
|
|
D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
|
|
|
|
|
C[0] ^ C[1] ^ C[4] ^ C[5];
|
|
|
|
|
NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
|
|
|
|
|
D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
|
|
|
|
|
C[1] ^ C[2] ^ C[5] ^ C[6];
|
|
|
|
|
NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
|
|
|
|
|
D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
|
|
|
|
|
C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
|
|
|
|
|
NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
|
|
|
|
|
D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
|
|
|
|
|
C[3] ^ C[4] ^ C[7];
|
|
|
|
|
NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
|
|
|
|
|
D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
|
|
|
|
|
C[5];
|
|
|
|
|
NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
|
|
|
|
|
D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
|
|
|
|
|
C[6];
|
|
|
|
|
|
|
|
|
|
crc_res = 0;
|
|
|
|
|
for (i = 0; i < 8; i++)
|
|
|
|
|
crc_res |= (NewCRC[i] << i);
|
|
|
|
|
|
|
|
|
|
return crc_res;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
