linux_old1/net/sunrpc/svc_xprt.c

1241 lines
33 KiB
C
Raw Normal View History

/*
* linux/net/sunrpc/svc_xprt.c
*
* Author: Tom Tucker <tom@opengridcomputing.com>
*/
#include <linux/sched.h>
#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
#include <net/sock.h>
#include <linux/sunrpc/stats.h>
#include <linux/sunrpc/svc_xprt.h>
#include <linux/sunrpc/svcsock.h>
#define RPCDBG_FACILITY RPCDBG_SVCXPRT
knfsd: avoid overloading the CPU scheduler with enormous load averages Avoid overloading the CPU scheduler with enormous load averages when handling high call-rate NFS loads. When the knfsd bottom half is made aware of an incoming call by the socket layer, it tries to choose an nfsd thread and wake it up. As long as there are idle threads, one will be woken up. If there are lot of nfsd threads (a sensible configuration when the server is disk-bound or is running an HSM), there will be many more nfsd threads than CPUs to run them. Under a high call-rate low service-time workload, the result is that almost every nfsd is runnable, but only a handful are actually able to run. This situation causes two significant problems: 1. The CPU scheduler takes over 10% of each CPU, which is robbing the nfsd threads of valuable CPU time. 2. At a high enough load, the nfsd threads starve userspace threads of CPU time, to the point where daemons like portmap and rpc.mountd do not schedule for tens of seconds at a time. Clients attempting to mount an NFS filesystem timeout at the very first step (opening a TCP connection to portmap) because portmap cannot wake up from select() and call accept() in time. Disclaimer: these effects were observed on a SLES9 kernel, modern kernels' schedulers may behave more gracefully. The solution is simple: keep in each svc_pool a counter of the number of threads which have been woken but have not yet run, and do not wake any more if that count reaches an arbitrary small threshold. Testing was on a 4 CPU 4 NIC Altix using 4 IRIX clients, each with 16 synthetic client threads simulating an rsync (i.e. recursive directory listing) workload reading from an i386 RH9 install image (161480 regular files in 10841 directories) on the server. That tree is small enough to fill in the server's RAM so no disk traffic was involved. This setup gives a sustained call rate in excess of 60000 calls/sec before being CPU-bound on the server. The server was running 128 nfsds. Profiling showed schedule() taking 6.7% of every CPU, and __wake_up() taking 5.2%. This patch drops those contributions to 3.0% and 2.2%. Load average was over 120 before the patch, and 20.9 after. This patch is a forward-ported version of knfsd-avoid-nfsd-overload which has been shipping in the SGI "Enhanced NFS" product since 2006. It has been posted before: http://article.gmane.org/gmane.linux.nfs/10374 Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-13 18:26:35 +08:00
#define SVC_MAX_WAKING 5
static struct svc_deferred_req *svc_deferred_dequeue(struct svc_xprt *xprt);
static int svc_deferred_recv(struct svc_rqst *rqstp);
static struct cache_deferred_req *svc_defer(struct cache_req *req);
static void svc_age_temp_xprts(unsigned long closure);
/* apparently the "standard" is that clients close
* idle connections after 5 minutes, servers after
* 6 minutes
* http://www.connectathon.org/talks96/nfstcp.pdf
*/
static int svc_conn_age_period = 6*60;
/* List of registered transport classes */
static DEFINE_SPINLOCK(svc_xprt_class_lock);
static LIST_HEAD(svc_xprt_class_list);
/* SMP locking strategy:
*
* svc_pool->sp_lock protects most of the fields of that pool.
* svc_serv->sv_lock protects sv_tempsocks, sv_permsocks, sv_tmpcnt.
* when both need to be taken (rare), svc_serv->sv_lock is first.
* BKL protects svc_serv->sv_nrthread.
* svc_sock->sk_lock protects the svc_sock->sk_deferred list
* and the ->sk_info_authunix cache.
*
* The XPT_BUSY bit in xprt->xpt_flags prevents a transport being
* enqueued multiply. During normal transport processing this bit
* is set by svc_xprt_enqueue and cleared by svc_xprt_received.
* Providers should not manipulate this bit directly.
*
* Some flags can be set to certain values at any time
* providing that certain rules are followed:
*
* XPT_CONN, XPT_DATA:
* - Can be set or cleared at any time.
* - After a set, svc_xprt_enqueue must be called to enqueue
* the transport for processing.
* - After a clear, the transport must be read/accepted.
* If this succeeds, it must be set again.
* XPT_CLOSE:
* - Can set at any time. It is never cleared.
* XPT_DEAD:
* - Can only be set while XPT_BUSY is held which ensures
* that no other thread will be using the transport or will
* try to set XPT_DEAD.
*/
int svc_reg_xprt_class(struct svc_xprt_class *xcl)
{
struct svc_xprt_class *cl;
int res = -EEXIST;
dprintk("svc: Adding svc transport class '%s'\n", xcl->xcl_name);
INIT_LIST_HEAD(&xcl->xcl_list);
spin_lock(&svc_xprt_class_lock);
/* Make sure there isn't already a class with the same name */
list_for_each_entry(cl, &svc_xprt_class_list, xcl_list) {
if (strcmp(xcl->xcl_name, cl->xcl_name) == 0)
goto out;
}
list_add_tail(&xcl->xcl_list, &svc_xprt_class_list);
res = 0;
out:
spin_unlock(&svc_xprt_class_lock);
return res;
}
EXPORT_SYMBOL_GPL(svc_reg_xprt_class);
void svc_unreg_xprt_class(struct svc_xprt_class *xcl)
{
dprintk("svc: Removing svc transport class '%s'\n", xcl->xcl_name);
spin_lock(&svc_xprt_class_lock);
list_del_init(&xcl->xcl_list);
spin_unlock(&svc_xprt_class_lock);
}
EXPORT_SYMBOL_GPL(svc_unreg_xprt_class);
/*
* Format the transport list for printing
*/
int svc_print_xprts(char *buf, int maxlen)
{
struct list_head *le;
char tmpstr[80];
int len = 0;
buf[0] = '\0';
spin_lock(&svc_xprt_class_lock);
list_for_each(le, &svc_xprt_class_list) {
int slen;
struct svc_xprt_class *xcl =
list_entry(le, struct svc_xprt_class, xcl_list);
sprintf(tmpstr, "%s %d\n", xcl->xcl_name, xcl->xcl_max_payload);
slen = strlen(tmpstr);
if (len + slen > maxlen)
break;
len += slen;
strcat(buf, tmpstr);
}
spin_unlock(&svc_xprt_class_lock);
return len;
}
static void svc_xprt_free(struct kref *kref)
{
struct svc_xprt *xprt =
container_of(kref, struct svc_xprt, xpt_ref);
struct module *owner = xprt->xpt_class->xcl_owner;
if (test_bit(XPT_CACHE_AUTH, &xprt->xpt_flags)
&& xprt->xpt_auth_cache != NULL)
svcauth_unix_info_release(xprt->xpt_auth_cache);
xprt->xpt_ops->xpo_free(xprt);
module_put(owner);
}
void svc_xprt_put(struct svc_xprt *xprt)
{
kref_put(&xprt->xpt_ref, svc_xprt_free);
}
EXPORT_SYMBOL_GPL(svc_xprt_put);
/*
* Called by transport drivers to initialize the transport independent
* portion of the transport instance.
*/
void svc_xprt_init(struct svc_xprt_class *xcl, struct svc_xprt *xprt,
struct svc_serv *serv)
{
memset(xprt, 0, sizeof(*xprt));
xprt->xpt_class = xcl;
xprt->xpt_ops = xcl->xcl_ops;
kref_init(&xprt->xpt_ref);
xprt->xpt_server = serv;
INIT_LIST_HEAD(&xprt->xpt_list);
INIT_LIST_HEAD(&xprt->xpt_ready);
INIT_LIST_HEAD(&xprt->xpt_deferred);
mutex_init(&xprt->xpt_mutex);
spin_lock_init(&xprt->xpt_lock);
set_bit(XPT_BUSY, &xprt->xpt_flags);
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 22:32:28 +08:00
rpc_init_wait_queue(&xprt->xpt_bc_pending, "xpt_bc_pending");
}
EXPORT_SYMBOL_GPL(svc_xprt_init);
static struct svc_xprt *__svc_xpo_create(struct svc_xprt_class *xcl,
struct svc_serv *serv,
const int family,
const unsigned short port,
int flags)
{
struct sockaddr_in sin = {
.sin_family = AF_INET,
.sin_addr.s_addr = htonl(INADDR_ANY),
.sin_port = htons(port),
};
struct sockaddr_in6 sin6 = {
.sin6_family = AF_INET6,
.sin6_addr = IN6ADDR_ANY_INIT,
.sin6_port = htons(port),
};
struct sockaddr *sap;
size_t len;
switch (family) {
case PF_INET:
sap = (struct sockaddr *)&sin;
len = sizeof(sin);
break;
case PF_INET6:
sap = (struct sockaddr *)&sin6;
len = sizeof(sin6);
break;
default:
return ERR_PTR(-EAFNOSUPPORT);
}
return xcl->xcl_ops->xpo_create(serv, sap, len, flags);
}
int svc_create_xprt(struct svc_serv *serv, const char *xprt_name,
const int family, const unsigned short port,
int flags)
{
struct svc_xprt_class *xcl;
dprintk("svc: creating transport %s[%d]\n", xprt_name, port);
spin_lock(&svc_xprt_class_lock);
list_for_each_entry(xcl, &svc_xprt_class_list, xcl_list) {
struct svc_xprt *newxprt;
if (strcmp(xprt_name, xcl->xcl_name))
continue;
if (!try_module_get(xcl->xcl_owner))
goto err;
spin_unlock(&svc_xprt_class_lock);
newxprt = __svc_xpo_create(xcl, serv, family, port, flags);
if (IS_ERR(newxprt)) {
module_put(xcl->xcl_owner);
return PTR_ERR(newxprt);
}
clear_bit(XPT_TEMP, &newxprt->xpt_flags);
spin_lock_bh(&serv->sv_lock);
list_add(&newxprt->xpt_list, &serv->sv_permsocks);
spin_unlock_bh(&serv->sv_lock);
clear_bit(XPT_BUSY, &newxprt->xpt_flags);
return svc_xprt_local_port(newxprt);
}
err:
spin_unlock(&svc_xprt_class_lock);
dprintk("svc: transport %s not found\n", xprt_name);
return -ENOENT;
}
EXPORT_SYMBOL_GPL(svc_create_xprt);
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 11:08:12 +08:00
/*
* Copy the local and remote xprt addresses to the rqstp structure
*/
void svc_xprt_copy_addrs(struct svc_rqst *rqstp, struct svc_xprt *xprt)
{
struct sockaddr *sin;
memcpy(&rqstp->rq_addr, &xprt->xpt_remote, xprt->xpt_remotelen);
rqstp->rq_addrlen = xprt->xpt_remotelen;
/*
* Destination address in request is needed for binding the
* source address in RPC replies/callbacks later.
*/
sin = (struct sockaddr *)&xprt->xpt_local;
switch (sin->sa_family) {
case AF_INET:
rqstp->rq_daddr.addr = ((struct sockaddr_in *)sin)->sin_addr;
break;
case AF_INET6:
rqstp->rq_daddr.addr6 = ((struct sockaddr_in6 *)sin)->sin6_addr;
break;
}
}
EXPORT_SYMBOL_GPL(svc_xprt_copy_addrs);
/**
* svc_print_addr - Format rq_addr field for printing
* @rqstp: svc_rqst struct containing address to print
* @buf: target buffer for formatted address
* @len: length of target buffer
*
*/
char *svc_print_addr(struct svc_rqst *rqstp, char *buf, size_t len)
{
return __svc_print_addr(svc_addr(rqstp), buf, len);
}
EXPORT_SYMBOL_GPL(svc_print_addr);
/*
* Queue up an idle server thread. Must have pool->sp_lock held.
* Note: this is really a stack rather than a queue, so that we only
* use as many different threads as we need, and the rest don't pollute
* the cache.
*/
static void svc_thread_enqueue(struct svc_pool *pool, struct svc_rqst *rqstp)
{
list_add(&rqstp->rq_list, &pool->sp_threads);
}
/*
* Dequeue an nfsd thread. Must have pool->sp_lock held.
*/
static void svc_thread_dequeue(struct svc_pool *pool, struct svc_rqst *rqstp)
{
list_del(&rqstp->rq_list);
}
/*
* Queue up a transport with data pending. If there are idle nfsd
* processes, wake 'em up.
*
*/
void svc_xprt_enqueue(struct svc_xprt *xprt)
{
struct svc_serv *serv = xprt->xpt_server;
struct svc_pool *pool;
struct svc_rqst *rqstp;
int cpu;
knfsd: avoid overloading the CPU scheduler with enormous load averages Avoid overloading the CPU scheduler with enormous load averages when handling high call-rate NFS loads. When the knfsd bottom half is made aware of an incoming call by the socket layer, it tries to choose an nfsd thread and wake it up. As long as there are idle threads, one will be woken up. If there are lot of nfsd threads (a sensible configuration when the server is disk-bound or is running an HSM), there will be many more nfsd threads than CPUs to run them. Under a high call-rate low service-time workload, the result is that almost every nfsd is runnable, but only a handful are actually able to run. This situation causes two significant problems: 1. The CPU scheduler takes over 10% of each CPU, which is robbing the nfsd threads of valuable CPU time. 2. At a high enough load, the nfsd threads starve userspace threads of CPU time, to the point where daemons like portmap and rpc.mountd do not schedule for tens of seconds at a time. Clients attempting to mount an NFS filesystem timeout at the very first step (opening a TCP connection to portmap) because portmap cannot wake up from select() and call accept() in time. Disclaimer: these effects were observed on a SLES9 kernel, modern kernels' schedulers may behave more gracefully. The solution is simple: keep in each svc_pool a counter of the number of threads which have been woken but have not yet run, and do not wake any more if that count reaches an arbitrary small threshold. Testing was on a 4 CPU 4 NIC Altix using 4 IRIX clients, each with 16 synthetic client threads simulating an rsync (i.e. recursive directory listing) workload reading from an i386 RH9 install image (161480 regular files in 10841 directories) on the server. That tree is small enough to fill in the server's RAM so no disk traffic was involved. This setup gives a sustained call rate in excess of 60000 calls/sec before being CPU-bound on the server. The server was running 128 nfsds. Profiling showed schedule() taking 6.7% of every CPU, and __wake_up() taking 5.2%. This patch drops those contributions to 3.0% and 2.2%. Load average was over 120 before the patch, and 20.9 after. This patch is a forward-ported version of knfsd-avoid-nfsd-overload which has been shipping in the SGI "Enhanced NFS" product since 2006. It has been posted before: http://article.gmane.org/gmane.linux.nfs/10374 Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-13 18:26:35 +08:00
int thread_avail;
if (!(xprt->xpt_flags &
((1<<XPT_CONN)|(1<<XPT_DATA)|(1<<XPT_CLOSE)|(1<<XPT_DEFERRED))))
return;
cpu = get_cpu();
pool = svc_pool_for_cpu(xprt->xpt_server, cpu);
put_cpu();
spin_lock_bh(&pool->sp_lock);
if (test_bit(XPT_DEAD, &xprt->xpt_flags)) {
/* Don't enqueue dead transports */
dprintk("svc: transport %p is dead, not enqueued\n", xprt);
goto out_unlock;
}
pool->sp_stats.packets++;
/* Mark transport as busy. It will remain in this state until
* the provider calls svc_xprt_received. We update XPT_BUSY
* atomically because it also guards against trying to enqueue
* the transport twice.
*/
if (test_and_set_bit(XPT_BUSY, &xprt->xpt_flags)) {
/* Don't enqueue transport while already enqueued */
dprintk("svc: transport %p busy, not enqueued\n", xprt);
goto out_unlock;
}
BUG_ON(xprt->xpt_pool != NULL);
xprt->xpt_pool = pool;
/* Handle pending connection */
if (test_bit(XPT_CONN, &xprt->xpt_flags))
goto process;
/* Handle close in-progress */
if (test_bit(XPT_CLOSE, &xprt->xpt_flags))
goto process;
/* Check if we have space to reply to a request */
if (!xprt->xpt_ops->xpo_has_wspace(xprt)) {
/* Don't enqueue while not enough space for reply */
dprintk("svc: no write space, transport %p not enqueued\n",
xprt);
xprt->xpt_pool = NULL;
clear_bit(XPT_BUSY, &xprt->xpt_flags);
goto out_unlock;
}
process:
knfsd: avoid overloading the CPU scheduler with enormous load averages Avoid overloading the CPU scheduler with enormous load averages when handling high call-rate NFS loads. When the knfsd bottom half is made aware of an incoming call by the socket layer, it tries to choose an nfsd thread and wake it up. As long as there are idle threads, one will be woken up. If there are lot of nfsd threads (a sensible configuration when the server is disk-bound or is running an HSM), there will be many more nfsd threads than CPUs to run them. Under a high call-rate low service-time workload, the result is that almost every nfsd is runnable, but only a handful are actually able to run. This situation causes two significant problems: 1. The CPU scheduler takes over 10% of each CPU, which is robbing the nfsd threads of valuable CPU time. 2. At a high enough load, the nfsd threads starve userspace threads of CPU time, to the point where daemons like portmap and rpc.mountd do not schedule for tens of seconds at a time. Clients attempting to mount an NFS filesystem timeout at the very first step (opening a TCP connection to portmap) because portmap cannot wake up from select() and call accept() in time. Disclaimer: these effects were observed on a SLES9 kernel, modern kernels' schedulers may behave more gracefully. The solution is simple: keep in each svc_pool a counter of the number of threads which have been woken but have not yet run, and do not wake any more if that count reaches an arbitrary small threshold. Testing was on a 4 CPU 4 NIC Altix using 4 IRIX clients, each with 16 synthetic client threads simulating an rsync (i.e. recursive directory listing) workload reading from an i386 RH9 install image (161480 regular files in 10841 directories) on the server. That tree is small enough to fill in the server's RAM so no disk traffic was involved. This setup gives a sustained call rate in excess of 60000 calls/sec before being CPU-bound on the server. The server was running 128 nfsds. Profiling showed schedule() taking 6.7% of every CPU, and __wake_up() taking 5.2%. This patch drops those contributions to 3.0% and 2.2%. Load average was over 120 before the patch, and 20.9 after. This patch is a forward-ported version of knfsd-avoid-nfsd-overload which has been shipping in the SGI "Enhanced NFS" product since 2006. It has been posted before: http://article.gmane.org/gmane.linux.nfs/10374 Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-13 18:26:35 +08:00
/* Work out whether threads are available */
thread_avail = !list_empty(&pool->sp_threads); /* threads are asleep */
if (pool->sp_nwaking >= SVC_MAX_WAKING) {
/* too many threads are runnable and trying to wake up */
thread_avail = 0;
pool->sp_stats.overloads_avoided++;
knfsd: avoid overloading the CPU scheduler with enormous load averages Avoid overloading the CPU scheduler with enormous load averages when handling high call-rate NFS loads. When the knfsd bottom half is made aware of an incoming call by the socket layer, it tries to choose an nfsd thread and wake it up. As long as there are idle threads, one will be woken up. If there are lot of nfsd threads (a sensible configuration when the server is disk-bound or is running an HSM), there will be many more nfsd threads than CPUs to run them. Under a high call-rate low service-time workload, the result is that almost every nfsd is runnable, but only a handful are actually able to run. This situation causes two significant problems: 1. The CPU scheduler takes over 10% of each CPU, which is robbing the nfsd threads of valuable CPU time. 2. At a high enough load, the nfsd threads starve userspace threads of CPU time, to the point where daemons like portmap and rpc.mountd do not schedule for tens of seconds at a time. Clients attempting to mount an NFS filesystem timeout at the very first step (opening a TCP connection to portmap) because portmap cannot wake up from select() and call accept() in time. Disclaimer: these effects were observed on a SLES9 kernel, modern kernels' schedulers may behave more gracefully. The solution is simple: keep in each svc_pool a counter of the number of threads which have been woken but have not yet run, and do not wake any more if that count reaches an arbitrary small threshold. Testing was on a 4 CPU 4 NIC Altix using 4 IRIX clients, each with 16 synthetic client threads simulating an rsync (i.e. recursive directory listing) workload reading from an i386 RH9 install image (161480 regular files in 10841 directories) on the server. That tree is small enough to fill in the server's RAM so no disk traffic was involved. This setup gives a sustained call rate in excess of 60000 calls/sec before being CPU-bound on the server. The server was running 128 nfsds. Profiling showed schedule() taking 6.7% of every CPU, and __wake_up() taking 5.2%. This patch drops those contributions to 3.0% and 2.2%. Load average was over 120 before the patch, and 20.9 after. This patch is a forward-ported version of knfsd-avoid-nfsd-overload which has been shipping in the SGI "Enhanced NFS" product since 2006. It has been posted before: http://article.gmane.org/gmane.linux.nfs/10374 Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-13 18:26:35 +08:00
}
if (thread_avail) {
rqstp = list_entry(pool->sp_threads.next,
struct svc_rqst,
rq_list);
dprintk("svc: transport %p served by daemon %p\n",
xprt, rqstp);
svc_thread_dequeue(pool, rqstp);
if (rqstp->rq_xprt)
printk(KERN_ERR
"svc_xprt_enqueue: server %p, rq_xprt=%p!\n",
rqstp, rqstp->rq_xprt);
rqstp->rq_xprt = xprt;
svc_xprt_get(xprt);
rqstp->rq_reserved = serv->sv_max_mesg;
atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved);
knfsd: avoid overloading the CPU scheduler with enormous load averages Avoid overloading the CPU scheduler with enormous load averages when handling high call-rate NFS loads. When the knfsd bottom half is made aware of an incoming call by the socket layer, it tries to choose an nfsd thread and wake it up. As long as there are idle threads, one will be woken up. If there are lot of nfsd threads (a sensible configuration when the server is disk-bound or is running an HSM), there will be many more nfsd threads than CPUs to run them. Under a high call-rate low service-time workload, the result is that almost every nfsd is runnable, but only a handful are actually able to run. This situation causes two significant problems: 1. The CPU scheduler takes over 10% of each CPU, which is robbing the nfsd threads of valuable CPU time. 2. At a high enough load, the nfsd threads starve userspace threads of CPU time, to the point where daemons like portmap and rpc.mountd do not schedule for tens of seconds at a time. Clients attempting to mount an NFS filesystem timeout at the very first step (opening a TCP connection to portmap) because portmap cannot wake up from select() and call accept() in time. Disclaimer: these effects were observed on a SLES9 kernel, modern kernels' schedulers may behave more gracefully. The solution is simple: keep in each svc_pool a counter of the number of threads which have been woken but have not yet run, and do not wake any more if that count reaches an arbitrary small threshold. Testing was on a 4 CPU 4 NIC Altix using 4 IRIX clients, each with 16 synthetic client threads simulating an rsync (i.e. recursive directory listing) workload reading from an i386 RH9 install image (161480 regular files in 10841 directories) on the server. That tree is small enough to fill in the server's RAM so no disk traffic was involved. This setup gives a sustained call rate in excess of 60000 calls/sec before being CPU-bound on the server. The server was running 128 nfsds. Profiling showed schedule() taking 6.7% of every CPU, and __wake_up() taking 5.2%. This patch drops those contributions to 3.0% and 2.2%. Load average was over 120 before the patch, and 20.9 after. This patch is a forward-ported version of knfsd-avoid-nfsd-overload which has been shipping in the SGI "Enhanced NFS" product since 2006. It has been posted before: http://article.gmane.org/gmane.linux.nfs/10374 Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-13 18:26:35 +08:00
rqstp->rq_waking = 1;
pool->sp_nwaking++;
pool->sp_stats.threads_woken++;
BUG_ON(xprt->xpt_pool != pool);
wake_up(&rqstp->rq_wait);
} else {
dprintk("svc: transport %p put into queue\n", xprt);
list_add_tail(&xprt->xpt_ready, &pool->sp_sockets);
pool->sp_stats.sockets_queued++;
BUG_ON(xprt->xpt_pool != pool);
}
out_unlock:
spin_unlock_bh(&pool->sp_lock);
}
EXPORT_SYMBOL_GPL(svc_xprt_enqueue);
/*
* Dequeue the first transport. Must be called with the pool->sp_lock held.
*/
static struct svc_xprt *svc_xprt_dequeue(struct svc_pool *pool)
{
struct svc_xprt *xprt;
if (list_empty(&pool->sp_sockets))
return NULL;
xprt = list_entry(pool->sp_sockets.next,
struct svc_xprt, xpt_ready);
list_del_init(&xprt->xpt_ready);
dprintk("svc: transport %p dequeued, inuse=%d\n",
xprt, atomic_read(&xprt->xpt_ref.refcount));
return xprt;
}
/*
* svc_xprt_received conditionally queues the transport for processing
* by another thread. The caller must hold the XPT_BUSY bit and must
* not thereafter touch transport data.
*
* Note: XPT_DATA only gets cleared when a read-attempt finds no (or
* insufficient) data.
*/
void svc_xprt_received(struct svc_xprt *xprt)
{
BUG_ON(!test_bit(XPT_BUSY, &xprt->xpt_flags));
xprt->xpt_pool = NULL;
clear_bit(XPT_BUSY, &xprt->xpt_flags);
svc_xprt_enqueue(xprt);
}
EXPORT_SYMBOL_GPL(svc_xprt_received);
/**
* svc_reserve - change the space reserved for the reply to a request.
* @rqstp: The request in question
* @space: new max space to reserve
*
* Each request reserves some space on the output queue of the transport
* to make sure the reply fits. This function reduces that reserved
* space to be the amount of space used already, plus @space.
*
*/
void svc_reserve(struct svc_rqst *rqstp, int space)
{
space += rqstp->rq_res.head[0].iov_len;
if (space < rqstp->rq_reserved) {
struct svc_xprt *xprt = rqstp->rq_xprt;
atomic_sub((rqstp->rq_reserved - space), &xprt->xpt_reserved);
rqstp->rq_reserved = space;
svc_xprt_enqueue(xprt);
}
}
EXPORT_SYMBOL_GPL(svc_reserve);
static void svc_xprt_release(struct svc_rqst *rqstp)
{
struct svc_xprt *xprt = rqstp->rq_xprt;
rqstp->rq_xprt->xpt_ops->xpo_release_rqst(rqstp);
kfree(rqstp->rq_deferred);
rqstp->rq_deferred = NULL;
svc_free_res_pages(rqstp);
rqstp->rq_res.page_len = 0;
rqstp->rq_res.page_base = 0;
/* Reset response buffer and release
* the reservation.
* But first, check that enough space was reserved
* for the reply, otherwise we have a bug!
*/
if ((rqstp->rq_res.len) > rqstp->rq_reserved)
printk(KERN_ERR "RPC request reserved %d but used %d\n",
rqstp->rq_reserved,
rqstp->rq_res.len);
rqstp->rq_res.head[0].iov_len = 0;
svc_reserve(rqstp, 0);
rqstp->rq_xprt = NULL;
svc_xprt_put(xprt);
}
/*
* External function to wake up a server waiting for data
* This really only makes sense for services like lockd
* which have exactly one thread anyway.
*/
void svc_wake_up(struct svc_serv *serv)
{
struct svc_rqst *rqstp;
unsigned int i;
struct svc_pool *pool;
for (i = 0; i < serv->sv_nrpools; i++) {
pool = &serv->sv_pools[i];
spin_lock_bh(&pool->sp_lock);
if (!list_empty(&pool->sp_threads)) {
rqstp = list_entry(pool->sp_threads.next,
struct svc_rqst,
rq_list);
dprintk("svc: daemon %p woken up.\n", rqstp);
/*
svc_thread_dequeue(pool, rqstp);
rqstp->rq_xprt = NULL;
*/
wake_up(&rqstp->rq_wait);
}
spin_unlock_bh(&pool->sp_lock);
}
}
EXPORT_SYMBOL_GPL(svc_wake_up);
int svc_port_is_privileged(struct sockaddr *sin)
{
switch (sin->sa_family) {
case AF_INET:
return ntohs(((struct sockaddr_in *)sin)->sin_port)
< PROT_SOCK;
case AF_INET6:
return ntohs(((struct sockaddr_in6 *)sin)->sin6_port)
< PROT_SOCK;
default:
return 0;
}
}
/*
* Make sure that we don't have too many active connections. If we have,
* something must be dropped. It's not clear what will happen if we allow
* "too many" connections, but when dealing with network-facing software,
* we have to code defensively. Here we do that by imposing hard limits.
*
* There's no point in trying to do random drop here for DoS
* prevention. The NFS clients does 1 reconnect in 15 seconds. An
* attacker can easily beat that.
*
* The only somewhat efficient mechanism would be if drop old
* connections from the same IP first. But right now we don't even
* record the client IP in svc_sock.
*
* single-threaded services that expect a lot of clients will probably
* need to set sv_maxconn to override the default value which is based
* on the number of threads
*/
static void svc_check_conn_limits(struct svc_serv *serv)
{
unsigned int limit = serv->sv_maxconn ? serv->sv_maxconn :
(serv->sv_nrthreads+3) * 20;
if (serv->sv_tmpcnt > limit) {
struct svc_xprt *xprt = NULL;
spin_lock_bh(&serv->sv_lock);
if (!list_empty(&serv->sv_tempsocks)) {
if (net_ratelimit()) {
/* Try to help the admin */
printk(KERN_NOTICE "%s: too many open "
"connections, consider increasing %s\n",
serv->sv_name, serv->sv_maxconn ?
"the max number of connections." :
"the number of threads.");
}
/*
* Always select the oldest connection. It's not fair,
* but so is life
*/
xprt = list_entry(serv->sv_tempsocks.prev,
struct svc_xprt,
xpt_list);
set_bit(XPT_CLOSE, &xprt->xpt_flags);
svc_xprt_get(xprt);
}
spin_unlock_bh(&serv->sv_lock);
if (xprt) {
svc_xprt_enqueue(xprt);
svc_xprt_put(xprt);
}
}
}
/*
* Receive the next request on any transport. This code is carefully
* organised not to touch any cachelines in the shared svc_serv
* structure, only cachelines in the local svc_pool.
*/
int svc_recv(struct svc_rqst *rqstp, long timeout)
{
struct svc_xprt *xprt = NULL;
struct svc_serv *serv = rqstp->rq_server;
struct svc_pool *pool = rqstp->rq_pool;
int len, i;
int pages;
struct xdr_buf *arg;
DECLARE_WAITQUEUE(wait, current);
long time_left;
dprintk("svc: server %p waiting for data (to = %ld)\n",
rqstp, timeout);
if (rqstp->rq_xprt)
printk(KERN_ERR
"svc_recv: service %p, transport not NULL!\n",
rqstp);
if (waitqueue_active(&rqstp->rq_wait))
printk(KERN_ERR
"svc_recv: service %p, wait queue active!\n",
rqstp);
/* now allocate needed pages. If we get a failure, sleep briefly */
pages = (serv->sv_max_mesg + PAGE_SIZE) / PAGE_SIZE;
for (i = 0; i < pages ; i++)
while (rqstp->rq_pages[i] == NULL) {
struct page *p = alloc_page(GFP_KERNEL);
if (!p) {
set_current_state(TASK_INTERRUPTIBLE);
if (signalled() || kthread_should_stop()) {
set_current_state(TASK_RUNNING);
return -EINTR;
}
schedule_timeout(msecs_to_jiffies(500));
}
rqstp->rq_pages[i] = p;
}
rqstp->rq_pages[i++] = NULL; /* this might be seen in nfs_read_actor */
BUG_ON(pages >= RPCSVC_MAXPAGES);
/* Make arg->head point to first page and arg->pages point to rest */
arg = &rqstp->rq_arg;
arg->head[0].iov_base = page_address(rqstp->rq_pages[0]);
arg->head[0].iov_len = PAGE_SIZE;
arg->pages = rqstp->rq_pages + 1;
arg->page_base = 0;
/* save at least one page for response */
arg->page_len = (pages-2)*PAGE_SIZE;
arg->len = (pages-1)*PAGE_SIZE;
arg->tail[0].iov_len = 0;
try_to_freeze();
cond_resched();
if (signalled() || kthread_should_stop())
return -EINTR;
spin_lock_bh(&pool->sp_lock);
knfsd: avoid overloading the CPU scheduler with enormous load averages Avoid overloading the CPU scheduler with enormous load averages when handling high call-rate NFS loads. When the knfsd bottom half is made aware of an incoming call by the socket layer, it tries to choose an nfsd thread and wake it up. As long as there are idle threads, one will be woken up. If there are lot of nfsd threads (a sensible configuration when the server is disk-bound or is running an HSM), there will be many more nfsd threads than CPUs to run them. Under a high call-rate low service-time workload, the result is that almost every nfsd is runnable, but only a handful are actually able to run. This situation causes two significant problems: 1. The CPU scheduler takes over 10% of each CPU, which is robbing the nfsd threads of valuable CPU time. 2. At a high enough load, the nfsd threads starve userspace threads of CPU time, to the point where daemons like portmap and rpc.mountd do not schedule for tens of seconds at a time. Clients attempting to mount an NFS filesystem timeout at the very first step (opening a TCP connection to portmap) because portmap cannot wake up from select() and call accept() in time. Disclaimer: these effects were observed on a SLES9 kernel, modern kernels' schedulers may behave more gracefully. The solution is simple: keep in each svc_pool a counter of the number of threads which have been woken but have not yet run, and do not wake any more if that count reaches an arbitrary small threshold. Testing was on a 4 CPU 4 NIC Altix using 4 IRIX clients, each with 16 synthetic client threads simulating an rsync (i.e. recursive directory listing) workload reading from an i386 RH9 install image (161480 regular files in 10841 directories) on the server. That tree is small enough to fill in the server's RAM so no disk traffic was involved. This setup gives a sustained call rate in excess of 60000 calls/sec before being CPU-bound on the server. The server was running 128 nfsds. Profiling showed schedule() taking 6.7% of every CPU, and __wake_up() taking 5.2%. This patch drops those contributions to 3.0% and 2.2%. Load average was over 120 before the patch, and 20.9 after. This patch is a forward-ported version of knfsd-avoid-nfsd-overload which has been shipping in the SGI "Enhanced NFS" product since 2006. It has been posted before: http://article.gmane.org/gmane.linux.nfs/10374 Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-13 18:26:35 +08:00
if (rqstp->rq_waking) {
rqstp->rq_waking = 0;
pool->sp_nwaking--;
BUG_ON(pool->sp_nwaking < 0);
}
xprt = svc_xprt_dequeue(pool);
if (xprt) {
rqstp->rq_xprt = xprt;
svc_xprt_get(xprt);
rqstp->rq_reserved = serv->sv_max_mesg;
atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved);
} else {
/* No data pending. Go to sleep */
svc_thread_enqueue(pool, rqstp);
/*
* We have to be able to interrupt this wait
* to bring down the daemons ...
*/
set_current_state(TASK_INTERRUPTIBLE);
/*
* checking kthread_should_stop() here allows us to avoid
* locking and signalling when stopping kthreads that call
* svc_recv. If the thread has already been woken up, then
* we can exit here without sleeping. If not, then it
* it'll be woken up quickly during the schedule_timeout
*/
if (kthread_should_stop()) {
set_current_state(TASK_RUNNING);
spin_unlock_bh(&pool->sp_lock);
return -EINTR;
}
add_wait_queue(&rqstp->rq_wait, &wait);
spin_unlock_bh(&pool->sp_lock);
time_left = schedule_timeout(timeout);
try_to_freeze();
spin_lock_bh(&pool->sp_lock);
remove_wait_queue(&rqstp->rq_wait, &wait);
if (!time_left)
pool->sp_stats.threads_timedout++;
xprt = rqstp->rq_xprt;
if (!xprt) {
svc_thread_dequeue(pool, rqstp);
spin_unlock_bh(&pool->sp_lock);
dprintk("svc: server %p, no data yet\n", rqstp);
if (signalled() || kthread_should_stop())
return -EINTR;
else
return -EAGAIN;
}
}
spin_unlock_bh(&pool->sp_lock);
len = 0;
if (test_bit(XPT_LISTENER, &xprt->xpt_flags)) {
struct svc_xprt *newxpt;
newxpt = xprt->xpt_ops->xpo_accept(xprt);
if (newxpt) {
/*
* We know this module_get will succeed because the
* listener holds a reference too
*/
__module_get(newxpt->xpt_class->xcl_owner);
svc_check_conn_limits(xprt->xpt_server);
spin_lock_bh(&serv->sv_lock);
set_bit(XPT_TEMP, &newxpt->xpt_flags);
list_add(&newxpt->xpt_list, &serv->sv_tempsocks);
serv->sv_tmpcnt++;
if (serv->sv_temptimer.function == NULL) {
/* setup timer to age temp transports */
setup_timer(&serv->sv_temptimer,
svc_age_temp_xprts,
(unsigned long)serv);
mod_timer(&serv->sv_temptimer,
jiffies + svc_conn_age_period * HZ);
}
spin_unlock_bh(&serv->sv_lock);
svc_xprt_received(newxpt);
}
svc_xprt_received(xprt);
} else if (!test_bit(XPT_CLOSE, &xprt->xpt_flags)) {
dprintk("svc: server %p, pool %u, transport %p, inuse=%d\n",
rqstp, pool->sp_id, xprt,
atomic_read(&xprt->xpt_ref.refcount));
rqstp->rq_deferred = svc_deferred_dequeue(xprt);
if (rqstp->rq_deferred) {
svc_xprt_received(xprt);
len = svc_deferred_recv(rqstp);
} else
len = xprt->xpt_ops->xpo_recvfrom(rqstp);
dprintk("svc: got len=%d\n", len);
}
if (test_bit(XPT_CLOSE, &xprt->xpt_flags)) {
dprintk("svc_recv: found XPT_CLOSE\n");
svc_delete_xprt(xprt);
}
/* No data, incomplete (TCP) read, or accept() */
if (len == 0 || len == -EAGAIN) {
rqstp->rq_res.len = 0;
svc_xprt_release(rqstp);
return -EAGAIN;
}
clear_bit(XPT_OLD, &xprt->xpt_flags);
rqstp->rq_secure = svc_port_is_privileged(svc_addr(rqstp));
rqstp->rq_chandle.defer = svc_defer;
if (serv->sv_stats)
serv->sv_stats->netcnt++;
return len;
}
EXPORT_SYMBOL_GPL(svc_recv);
/*
* Drop request
*/
void svc_drop(struct svc_rqst *rqstp)
{
dprintk("svc: xprt %p dropped request\n", rqstp->rq_xprt);
svc_xprt_release(rqstp);
}
EXPORT_SYMBOL_GPL(svc_drop);
/*
* Return reply to client.
*/
int svc_send(struct svc_rqst *rqstp)
{
struct svc_xprt *xprt;
int len;
struct xdr_buf *xb;
xprt = rqstp->rq_xprt;
if (!xprt)
return -EFAULT;
/* release the receive skb before sending the reply */
rqstp->rq_xprt->xpt_ops->xpo_release_rqst(rqstp);
/* calculate over-all length */
xb = &rqstp->rq_res;
xb->len = xb->head[0].iov_len +
xb->page_len +
xb->tail[0].iov_len;
/* Grab mutex to serialize outgoing data. */
mutex_lock(&xprt->xpt_mutex);
if (test_bit(XPT_DEAD, &xprt->xpt_flags))
len = -ENOTCONN;
else
len = xprt->xpt_ops->xpo_sendto(rqstp);
mutex_unlock(&xprt->xpt_mutex);
nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-10 22:32:28 +08:00
rpc_wake_up(&xprt->xpt_bc_pending);
svc_xprt_release(rqstp);
if (len == -ECONNREFUSED || len == -ENOTCONN || len == -EAGAIN)
return 0;
return len;
}
/*
* Timer function to close old temporary transports, using
* a mark-and-sweep algorithm.
*/
static void svc_age_temp_xprts(unsigned long closure)
{
struct svc_serv *serv = (struct svc_serv *)closure;
struct svc_xprt *xprt;
struct list_head *le, *next;
LIST_HEAD(to_be_aged);
dprintk("svc_age_temp_xprts\n");
if (!spin_trylock_bh(&serv->sv_lock)) {
/* busy, try again 1 sec later */
dprintk("svc_age_temp_xprts: busy\n");
mod_timer(&serv->sv_temptimer, jiffies + HZ);
return;
}
list_for_each_safe(le, next, &serv->sv_tempsocks) {
xprt = list_entry(le, struct svc_xprt, xpt_list);
/* First time through, just mark it OLD. Second time
* through, close it. */
if (!test_and_set_bit(XPT_OLD, &xprt->xpt_flags))
continue;
if (atomic_read(&xprt->xpt_ref.refcount) > 1
|| test_bit(XPT_BUSY, &xprt->xpt_flags))
continue;
svc_xprt_get(xprt);
list_move(le, &to_be_aged);
set_bit(XPT_CLOSE, &xprt->xpt_flags);
set_bit(XPT_DETACHED, &xprt->xpt_flags);
}
spin_unlock_bh(&serv->sv_lock);
while (!list_empty(&to_be_aged)) {
le = to_be_aged.next;
/* fiddling the xpt_list node is safe 'cos we're XPT_DETACHED */
list_del_init(le);
xprt = list_entry(le, struct svc_xprt, xpt_list);
dprintk("queuing xprt %p for closing\n", xprt);
/* a thread will dequeue and close it soon */
svc_xprt_enqueue(xprt);
svc_xprt_put(xprt);
}
mod_timer(&serv->sv_temptimer, jiffies + svc_conn_age_period * HZ);
}
/*
* Remove a dead transport
*/
void svc_delete_xprt(struct svc_xprt *xprt)
{
struct svc_serv *serv = xprt->xpt_server;
struct svc_deferred_req *dr;
/* Only do this once */
if (test_and_set_bit(XPT_DEAD, &xprt->xpt_flags))
return;
dprintk("svc: svc_delete_xprt(%p)\n", xprt);
xprt->xpt_ops->xpo_detach(xprt);
spin_lock_bh(&serv->sv_lock);
if (!test_and_set_bit(XPT_DETACHED, &xprt->xpt_flags))
list_del_init(&xprt->xpt_list);
/*
* We used to delete the transport from whichever list
* it's sk_xprt.xpt_ready node was on, but we don't actually
* need to. This is because the only time we're called
* while still attached to a queue, the queue itself
* is about to be destroyed (in svc_destroy).
*/
if (test_bit(XPT_TEMP, &xprt->xpt_flags))
serv->sv_tmpcnt--;
for (dr = svc_deferred_dequeue(xprt); dr;
dr = svc_deferred_dequeue(xprt)) {
svc_xprt_put(xprt);
kfree(dr);
}
svc_xprt_put(xprt);
spin_unlock_bh(&serv->sv_lock);
}
void svc_close_xprt(struct svc_xprt *xprt)
{
set_bit(XPT_CLOSE, &xprt->xpt_flags);
if (test_and_set_bit(XPT_BUSY, &xprt->xpt_flags))
/* someone else will have to effect the close */
return;
svc_xprt_get(xprt);
svc_delete_xprt(xprt);
clear_bit(XPT_BUSY, &xprt->xpt_flags);
svc_xprt_put(xprt);
}
EXPORT_SYMBOL_GPL(svc_close_xprt);
void svc_close_all(struct list_head *xprt_list)
{
struct svc_xprt *xprt;
struct svc_xprt *tmp;
list_for_each_entry_safe(xprt, tmp, xprt_list, xpt_list) {
set_bit(XPT_CLOSE, &xprt->xpt_flags);
if (test_bit(XPT_BUSY, &xprt->xpt_flags)) {
/* Waiting to be processed, but no threads left,
* So just remove it from the waiting list
*/
list_del_init(&xprt->xpt_ready);
clear_bit(XPT_BUSY, &xprt->xpt_flags);
}
svc_close_xprt(xprt);
}
}
/*
* Handle defer and revisit of requests
*/
static void svc_revisit(struct cache_deferred_req *dreq, int too_many)
{
struct svc_deferred_req *dr =
container_of(dreq, struct svc_deferred_req, handle);
struct svc_xprt *xprt = dr->xprt;
spin_lock(&xprt->xpt_lock);
set_bit(XPT_DEFERRED, &xprt->xpt_flags);
if (too_many || test_bit(XPT_DEAD, &xprt->xpt_flags)) {
spin_unlock(&xprt->xpt_lock);
dprintk("revisit canceled\n");
svc_xprt_put(xprt);
kfree(dr);
return;
}
dprintk("revisit queued\n");
dr->xprt = NULL;
list_add(&dr->handle.recent, &xprt->xpt_deferred);
spin_unlock(&xprt->xpt_lock);
svc_xprt_enqueue(xprt);
svc_xprt_put(xprt);
}
/*
* Save the request off for later processing. The request buffer looks
* like this:
*
* <xprt-header><rpc-header><rpc-pagelist><rpc-tail>
*
* This code can only handle requests that consist of an xprt-header
* and rpc-header.
*/
static struct cache_deferred_req *svc_defer(struct cache_req *req)
{
struct svc_rqst *rqstp = container_of(req, struct svc_rqst, rq_chandle);
struct svc_deferred_req *dr;
if (rqstp->rq_arg.page_len || !rqstp->rq_usedeferral)
return NULL; /* if more than a page, give up FIXME */
if (rqstp->rq_deferred) {
dr = rqstp->rq_deferred;
rqstp->rq_deferred = NULL;
} else {
size_t skip;
size_t size;
/* FIXME maybe discard if size too large */
size = sizeof(struct svc_deferred_req) + rqstp->rq_arg.len;
dr = kmalloc(size, GFP_KERNEL);
if (dr == NULL)
return NULL;
dr->handle.owner = rqstp->rq_server;
dr->prot = rqstp->rq_prot;
memcpy(&dr->addr, &rqstp->rq_addr, rqstp->rq_addrlen);
dr->addrlen = rqstp->rq_addrlen;
dr->daddr = rqstp->rq_daddr;
dr->argslen = rqstp->rq_arg.len >> 2;
dr->xprt_hlen = rqstp->rq_xprt_hlen;
/* back up head to the start of the buffer and copy */
skip = rqstp->rq_arg.len - rqstp->rq_arg.head[0].iov_len;
memcpy(dr->args, rqstp->rq_arg.head[0].iov_base - skip,
dr->argslen << 2);
}
svc_xprt_get(rqstp->rq_xprt);
dr->xprt = rqstp->rq_xprt;
dr->handle.revisit = svc_revisit;
return &dr->handle;
}
/*
* recv data from a deferred request into an active one
*/
static int svc_deferred_recv(struct svc_rqst *rqstp)
{
struct svc_deferred_req *dr = rqstp->rq_deferred;
/* setup iov_base past transport header */
rqstp->rq_arg.head[0].iov_base = dr->args + (dr->xprt_hlen>>2);
/* The iov_len does not include the transport header bytes */
rqstp->rq_arg.head[0].iov_len = (dr->argslen<<2) - dr->xprt_hlen;
rqstp->rq_arg.page_len = 0;
/* The rq_arg.len includes the transport header bytes */
rqstp->rq_arg.len = dr->argslen<<2;
rqstp->rq_prot = dr->prot;
memcpy(&rqstp->rq_addr, &dr->addr, dr->addrlen);
rqstp->rq_addrlen = dr->addrlen;
/* Save off transport header len in case we get deferred again */
rqstp->rq_xprt_hlen = dr->xprt_hlen;
rqstp->rq_daddr = dr->daddr;
rqstp->rq_respages = rqstp->rq_pages;
return (dr->argslen<<2) - dr->xprt_hlen;
}
static struct svc_deferred_req *svc_deferred_dequeue(struct svc_xprt *xprt)
{
struct svc_deferred_req *dr = NULL;
if (!test_bit(XPT_DEFERRED, &xprt->xpt_flags))
return NULL;
spin_lock(&xprt->xpt_lock);
clear_bit(XPT_DEFERRED, &xprt->xpt_flags);
if (!list_empty(&xprt->xpt_deferred)) {
dr = list_entry(xprt->xpt_deferred.next,
struct svc_deferred_req,
handle.recent);
list_del_init(&dr->handle.recent);
set_bit(XPT_DEFERRED, &xprt->xpt_flags);
}
spin_unlock(&xprt->xpt_lock);
return dr;
}
/**
* svc_find_xprt - find an RPC transport instance
* @serv: pointer to svc_serv to search
* @xcl_name: C string containing transport's class name
* @af: Address family of transport's local address
* @port: transport's IP port number
*
* Return the transport instance pointer for the endpoint accepting
* connections/peer traffic from the specified transport class,
* address family and port.
*
* Specifying 0 for the address family or port is effectively a
* wild-card, and will result in matching the first transport in the
* service's list that has a matching class name.
*/
struct svc_xprt *svc_find_xprt(struct svc_serv *serv, const char *xcl_name,
const sa_family_t af, const unsigned short port)
{
struct svc_xprt *xprt;
struct svc_xprt *found = NULL;
/* Sanity check the args */
if (serv == NULL || xcl_name == NULL)
return found;
spin_lock_bh(&serv->sv_lock);
list_for_each_entry(xprt, &serv->sv_permsocks, xpt_list) {
if (strcmp(xprt->xpt_class->xcl_name, xcl_name))
continue;
if (af != AF_UNSPEC && af != xprt->xpt_local.ss_family)
continue;
if (port != 0 && port != svc_xprt_local_port(xprt))
continue;
found = xprt;
svc_xprt_get(xprt);
break;
}
spin_unlock_bh(&serv->sv_lock);
return found;
}
EXPORT_SYMBOL_GPL(svc_find_xprt);
static int svc_one_xprt_name(const struct svc_xprt *xprt,
char *pos, int remaining)
{
int len;
len = snprintf(pos, remaining, "%s %u\n",
xprt->xpt_class->xcl_name,
svc_xprt_local_port(xprt));
if (len >= remaining)
return -ENAMETOOLONG;
return len;
}
/**
* svc_xprt_names - format a buffer with a list of transport names
* @serv: pointer to an RPC service
* @buf: pointer to a buffer to be filled in
* @buflen: length of buffer to be filled in
*
* Fills in @buf with a string containing a list of transport names,
* each name terminated with '\n'.
*
* Returns positive length of the filled-in string on success; otherwise
* a negative errno value is returned if an error occurs.
*/
int svc_xprt_names(struct svc_serv *serv, char *buf, const int buflen)
{
struct svc_xprt *xprt;
int len, totlen;
char *pos;
/* Sanity check args */
if (!serv)
return 0;
spin_lock_bh(&serv->sv_lock);
pos = buf;
totlen = 0;
list_for_each_entry(xprt, &serv->sv_permsocks, xpt_list) {
len = svc_one_xprt_name(xprt, pos, buflen - totlen);
if (len < 0) {
*buf = '\0';
totlen = len;
}
if (len <= 0)
break;
pos += len;
totlen += len;
}
spin_unlock_bh(&serv->sv_lock);
return totlen;
}
EXPORT_SYMBOL_GPL(svc_xprt_names);
/*----------------------------------------------------------------------------*/
static void *svc_pool_stats_start(struct seq_file *m, loff_t *pos)
{
unsigned int pidx = (unsigned int)*pos;
struct svc_serv *serv = m->private;
dprintk("svc_pool_stats_start, *pidx=%u\n", pidx);
if (!pidx)
return SEQ_START_TOKEN;
return (pidx > serv->sv_nrpools ? NULL : &serv->sv_pools[pidx-1]);
}
static void *svc_pool_stats_next(struct seq_file *m, void *p, loff_t *pos)
{
struct svc_pool *pool = p;
struct svc_serv *serv = m->private;
dprintk("svc_pool_stats_next, *pos=%llu\n", *pos);
if (p == SEQ_START_TOKEN) {
pool = &serv->sv_pools[0];
} else {
unsigned int pidx = (pool - &serv->sv_pools[0]);
if (pidx < serv->sv_nrpools-1)
pool = &serv->sv_pools[pidx+1];
else
pool = NULL;
}
++*pos;
return pool;
}
static void svc_pool_stats_stop(struct seq_file *m, void *p)
{
}
static int svc_pool_stats_show(struct seq_file *m, void *p)
{
struct svc_pool *pool = p;
if (p == SEQ_START_TOKEN) {
seq_puts(m, "# pool packets-arrived sockets-enqueued threads-woken overloads-avoided threads-timedout\n");
return 0;
}
seq_printf(m, "%u %lu %lu %lu %lu %lu\n",
pool->sp_id,
pool->sp_stats.packets,
pool->sp_stats.sockets_queued,
pool->sp_stats.threads_woken,
pool->sp_stats.overloads_avoided,
pool->sp_stats.threads_timedout);
return 0;
}
static const struct seq_operations svc_pool_stats_seq_ops = {
.start = svc_pool_stats_start,
.next = svc_pool_stats_next,
.stop = svc_pool_stats_stop,
.show = svc_pool_stats_show,
};
int svc_pool_stats_open(struct svc_serv *serv, struct file *file)
{
int err;
err = seq_open(file, &svc_pool_stats_seq_ops);
if (!err)
((struct seq_file *) file->private_data)->private = serv;
return err;
}
EXPORT_SYMBOL(svc_pool_stats_open);
/*----------------------------------------------------------------------------*/