linux_old1/drivers/iommu/omap-iommu.h

238 lines
6.0 KiB
C
Raw Normal View History

/*
* omap iommu: main structures
*
* Copyright (C) 2008-2009 Nokia Corporation
*
* Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _OMAP_IOMMU_H
#define _OMAP_IOMMU_H
#include <linux/bitops.h>
#define for_each_iotlb_cr(obj, n, __i, cr) \
for (__i = 0; \
(__i < (n)) && (cr = __iotlb_read_cr((obj), __i), true); \
__i++)
struct iotlb_entry {
u32 da;
u32 pa;
u32 pgsz, prsvd, valid;
u32 endian, elsz, mixed;
};
struct omap_iommu {
const char *name;
void __iomem *regbase;
struct regmap *syscfg;
struct device *dev;
struct iommu_domain *domain;
struct dentry *debug_dir;
spinlock_t iommu_lock; /* global for this whole object */
/*
* We don't change iopgd for a situation like pgd for a task,
* but share it globally for each iommu.
*/
u32 *iopgd;
spinlock_t page_table_lock; /* protect iopgd */
int nr_tlb_entries;
void *ctx; /* iommu context: registres saved area */
int has_bus_err_back;
u32 id;
};
struct cr_regs {
u32 cam;
u32 ram;
};
struct iotlb_lock {
short base;
short vict;
};
/**
* dev_to_omap_iommu() - retrieves an omap iommu object from a user device
* @dev: iommu client device
*/
static inline struct omap_iommu *dev_to_omap_iommu(struct device *dev)
{
struct omap_iommu_arch_data *arch_data = dev->archdata.iommu;
return arch_data->iommu_dev;
}
/*
* MMU Register offsets
*/
#define MMU_REVISION 0x00
#define MMU_IRQSTATUS 0x18
#define MMU_IRQENABLE 0x1c
#define MMU_WALKING_ST 0x40
#define MMU_CNTL 0x44
#define MMU_FAULT_AD 0x48
#define MMU_TTB 0x4c
#define MMU_LOCK 0x50
#define MMU_LD_TLB 0x54
#define MMU_CAM 0x58
#define MMU_RAM 0x5c
#define MMU_GFLUSH 0x60
#define MMU_FLUSH_ENTRY 0x64
#define MMU_READ_CAM 0x68
#define MMU_READ_RAM 0x6c
#define MMU_EMU_FAULT_AD 0x70
#define MMU_GP_REG 0x88
#define MMU_REG_SIZE 256
/*
* MMU Register bit definitions
*/
iommu/omap: Consolidate OMAP IOMMU modules The OMAP IOMMU driver was originally designed as modules, and split into a core module and a thin arch-specific module through the OMAP arch-specific struct iommu_functions, to scale for both OMAP1 and OMAP2+ IOMMU variants. The driver can only be built for OMAP2+ platforms currently, and also can only be built-in after the adaptation to generic IOMMU API. The OMAP1 variant was never added and will most probably be never added (the code for the only potential user, its parent, DSP processor has already been cleaned up). So, consolidate the OMAP2 specific omap-iommu2 module into the core OMAP IOMMU driver - this eliminates the arch-specific ops structure and simplifies the driver into a single module that only implements the generic IOMMU API's iommu_ops. The following are the main changes: - omap-iommu2 module is completely eliminated, with the common definitions moved to the internal omap-iommu.h, and the ops implementations moved into omap-iommu.c - OMAP arch-specific struct iommu_functions is also eliminated, with the ops implementations directly absorbed into the calling functions - iotlb_alloc_cr() is no longer inlined and defined only when PREFETCH_IOTLB is defined - iotlb_dump_cr() is similarly defined only when CONFIG_OMAP_IOMMU_DEBUG is defined - Elimination of the OMAP IOMMU exported functions to register the arch ops, omap_install_iommu_arch() & omap_uninstall_iommu_arch() - Any stale comments about OMAP1 are also cleaned up Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-10-23 06:22:27 +08:00
/* IRQSTATUS & IRQENABLE */
#define MMU_IRQ_MULTIHITFAULT BIT(4)
#define MMU_IRQ_TABLEWALKFAULT BIT(3)
#define MMU_IRQ_EMUMISS BIT(2)
#define MMU_IRQ_TRANSLATIONFAULT BIT(1)
#define MMU_IRQ_TLBMISS BIT(0)
iommu/omap: Consolidate OMAP IOMMU modules The OMAP IOMMU driver was originally designed as modules, and split into a core module and a thin arch-specific module through the OMAP arch-specific struct iommu_functions, to scale for both OMAP1 and OMAP2+ IOMMU variants. The driver can only be built for OMAP2+ platforms currently, and also can only be built-in after the adaptation to generic IOMMU API. The OMAP1 variant was never added and will most probably be never added (the code for the only potential user, its parent, DSP processor has already been cleaned up). So, consolidate the OMAP2 specific omap-iommu2 module into the core OMAP IOMMU driver - this eliminates the arch-specific ops structure and simplifies the driver into a single module that only implements the generic IOMMU API's iommu_ops. The following are the main changes: - omap-iommu2 module is completely eliminated, with the common definitions moved to the internal omap-iommu.h, and the ops implementations moved into omap-iommu.c - OMAP arch-specific struct iommu_functions is also eliminated, with the ops implementations directly absorbed into the calling functions - iotlb_alloc_cr() is no longer inlined and defined only when PREFETCH_IOTLB is defined - iotlb_dump_cr() is similarly defined only when CONFIG_OMAP_IOMMU_DEBUG is defined - Elimination of the OMAP IOMMU exported functions to register the arch ops, omap_install_iommu_arch() & omap_uninstall_iommu_arch() - Any stale comments about OMAP1 are also cleaned up Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-10-23 06:22:27 +08:00
#define __MMU_IRQ_FAULT \
(MMU_IRQ_MULTIHITFAULT | MMU_IRQ_EMUMISS | MMU_IRQ_TRANSLATIONFAULT)
#define MMU_IRQ_MASK \
(__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_TLBMISS)
#define MMU_IRQ_TWL_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT)
#define MMU_IRQ_TLB_MISS_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TLBMISS)
/* MMU_CNTL */
#define MMU_CNTL_SHIFT 1
#define MMU_CNTL_MASK (7 << MMU_CNTL_SHIFT)
#define MMU_CNTL_EML_TLB BIT(3)
#define MMU_CNTL_TWL_EN BIT(2)
#define MMU_CNTL_MMU_EN BIT(1)
iommu/omap: Consolidate OMAP IOMMU modules The OMAP IOMMU driver was originally designed as modules, and split into a core module and a thin arch-specific module through the OMAP arch-specific struct iommu_functions, to scale for both OMAP1 and OMAP2+ IOMMU variants. The driver can only be built for OMAP2+ platforms currently, and also can only be built-in after the adaptation to generic IOMMU API. The OMAP1 variant was never added and will most probably be never added (the code for the only potential user, its parent, DSP processor has already been cleaned up). So, consolidate the OMAP2 specific omap-iommu2 module into the core OMAP IOMMU driver - this eliminates the arch-specific ops structure and simplifies the driver into a single module that only implements the generic IOMMU API's iommu_ops. The following are the main changes: - omap-iommu2 module is completely eliminated, with the common definitions moved to the internal omap-iommu.h, and the ops implementations moved into omap-iommu.c - OMAP arch-specific struct iommu_functions is also eliminated, with the ops implementations directly absorbed into the calling functions - iotlb_alloc_cr() is no longer inlined and defined only when PREFETCH_IOTLB is defined - iotlb_dump_cr() is similarly defined only when CONFIG_OMAP_IOMMU_DEBUG is defined - Elimination of the OMAP IOMMU exported functions to register the arch ops, omap_install_iommu_arch() & omap_uninstall_iommu_arch() - Any stale comments about OMAP1 are also cleaned up Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-10-23 06:22:27 +08:00
/* CAM */
#define MMU_CAM_VATAG_SHIFT 12
#define MMU_CAM_VATAG_MASK \
((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
#define MMU_CAM_P BIT(3)
#define MMU_CAM_V BIT(2)
#define MMU_CAM_PGSZ_MASK 3
#define MMU_CAM_PGSZ_1M (0 << 0)
#define MMU_CAM_PGSZ_64K (1 << 0)
#define MMU_CAM_PGSZ_4K (2 << 0)
#define MMU_CAM_PGSZ_16M (3 << 0)
iommu/omap: Consolidate OMAP IOMMU modules The OMAP IOMMU driver was originally designed as modules, and split into a core module and a thin arch-specific module through the OMAP arch-specific struct iommu_functions, to scale for both OMAP1 and OMAP2+ IOMMU variants. The driver can only be built for OMAP2+ platforms currently, and also can only be built-in after the adaptation to generic IOMMU API. The OMAP1 variant was never added and will most probably be never added (the code for the only potential user, its parent, DSP processor has already been cleaned up). So, consolidate the OMAP2 specific omap-iommu2 module into the core OMAP IOMMU driver - this eliminates the arch-specific ops structure and simplifies the driver into a single module that only implements the generic IOMMU API's iommu_ops. The following are the main changes: - omap-iommu2 module is completely eliminated, with the common definitions moved to the internal omap-iommu.h, and the ops implementations moved into omap-iommu.c - OMAP arch-specific struct iommu_functions is also eliminated, with the ops implementations directly absorbed into the calling functions - iotlb_alloc_cr() is no longer inlined and defined only when PREFETCH_IOTLB is defined - iotlb_dump_cr() is similarly defined only when CONFIG_OMAP_IOMMU_DEBUG is defined - Elimination of the OMAP IOMMU exported functions to register the arch ops, omap_install_iommu_arch() & omap_uninstall_iommu_arch() - Any stale comments about OMAP1 are also cleaned up Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-10-23 06:22:27 +08:00
/* RAM */
#define MMU_RAM_PADDR_SHIFT 12
#define MMU_RAM_PADDR_MASK \
((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
#define MMU_RAM_ENDIAN_SHIFT 9
#define MMU_RAM_ENDIAN_MASK BIT(MMU_RAM_ENDIAN_SHIFT)
#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT)
#define MMU_RAM_ENDIAN_BIG BIT(MMU_RAM_ENDIAN_SHIFT)
#define MMU_RAM_ELSZ_SHIFT 7
#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_MIXED_SHIFT 6
#define MMU_RAM_MIXED_MASK BIT(MMU_RAM_MIXED_SHIFT)
#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK
#define MMU_GP_REG_BUS_ERR_BACK_EN 0x1
iommu/omap: Consolidate OMAP IOMMU modules The OMAP IOMMU driver was originally designed as modules, and split into a core module and a thin arch-specific module through the OMAP arch-specific struct iommu_functions, to scale for both OMAP1 and OMAP2+ IOMMU variants. The driver can only be built for OMAP2+ platforms currently, and also can only be built-in after the adaptation to generic IOMMU API. The OMAP1 variant was never added and will most probably be never added (the code for the only potential user, its parent, DSP processor has already been cleaned up). So, consolidate the OMAP2 specific omap-iommu2 module into the core OMAP IOMMU driver - this eliminates the arch-specific ops structure and simplifies the driver into a single module that only implements the generic IOMMU API's iommu_ops. The following are the main changes: - omap-iommu2 module is completely eliminated, with the common definitions moved to the internal omap-iommu.h, and the ops implementations moved into omap-iommu.c - OMAP arch-specific struct iommu_functions is also eliminated, with the ops implementations directly absorbed into the calling functions - iotlb_alloc_cr() is no longer inlined and defined only when PREFETCH_IOTLB is defined - iotlb_dump_cr() is similarly defined only when CONFIG_OMAP_IOMMU_DEBUG is defined - Elimination of the OMAP IOMMU exported functions to register the arch ops, omap_install_iommu_arch() & omap_uninstall_iommu_arch() - Any stale comments about OMAP1 are also cleaned up Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-10-23 06:22:27 +08:00
#define get_cam_va_mask(pgsz) \
(((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 : \
((pgsz) == MMU_CAM_PGSZ_1M) ? 0xfff00000 : \
((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \
((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0)
/*
* DSP_SYSTEM registers and bit definitions (applicable only for DRA7xx DSP)
*/
#define DSP_SYS_REVISION 0x00
#define DSP_SYS_MMU_CONFIG 0x18
#define DSP_SYS_MMU_CONFIG_EN_SHIFT 4
/*
* utilities for super page(16MB, 1MB, 64KB and 4KB)
*/
#define iopgsz_max(bytes) \
(((bytes) >= SZ_16M) ? SZ_16M : \
((bytes) >= SZ_1M) ? SZ_1M : \
((bytes) >= SZ_64K) ? SZ_64K : \
((bytes) >= SZ_4K) ? SZ_4K : 0)
#define bytes_to_iopgsz(bytes) \
(((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M : \
((bytes) == SZ_1M) ? MMU_CAM_PGSZ_1M : \
((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K : \
((bytes) == SZ_4K) ? MMU_CAM_PGSZ_4K : -1)
#define iopgsz_to_bytes(iopgsz) \
(((iopgsz) == MMU_CAM_PGSZ_16M) ? SZ_16M : \
((iopgsz) == MMU_CAM_PGSZ_1M) ? SZ_1M : \
((iopgsz) == MMU_CAM_PGSZ_64K) ? SZ_64K : \
((iopgsz) == MMU_CAM_PGSZ_4K) ? SZ_4K : 0)
#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0)
/*
* global functions
*/
struct cr_regs __iotlb_read_cr(struct omap_iommu *obj, int n);
void iotlb_lock_get(struct omap_iommu *obj, struct iotlb_lock *l);
void iotlb_lock_set(struct omap_iommu *obj, struct iotlb_lock *l);
#ifdef CONFIG_OMAP_IOMMU_DEBUG
void omap_iommu_debugfs_init(void);
void omap_iommu_debugfs_exit(void);
void omap_iommu_debugfs_add(struct omap_iommu *obj);
void omap_iommu_debugfs_remove(struct omap_iommu *obj);
#else
static inline void omap_iommu_debugfs_init(void) { }
static inline void omap_iommu_debugfs_exit(void) { }
static inline void omap_iommu_debugfs_add(struct omap_iommu *obj) { }
static inline void omap_iommu_debugfs_remove(struct omap_iommu *obj) { }
#endif
/*
* register accessors
*/
static inline u32 iommu_read_reg(struct omap_iommu *obj, size_t offs)
{
return __raw_readl(obj->regbase + offs);
}
static inline void iommu_write_reg(struct omap_iommu *obj, u32 val, size_t offs)
{
__raw_writel(val, obj->regbase + offs);
}
static inline int iotlb_cr_valid(struct cr_regs *cr)
{
if (!cr)
return -EINVAL;
return cr->cam & MMU_CAM_V;
}
#endif /* _OMAP_IOMMU_H */