p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/arch/arm/mach-mmp/Kconfig

117 lines
3.0 KiB
Plaintext
Raw Normal View History

[ARM] pxa: add base support for Marvell's PXA168 processor line """The Marvell® PXA168 processor is the first in a family of application processors targeted at mass market opportunities in computing and consumer devices. It balances high computing and multimedia performance with low power consumption to support extended battery life, and includes a wealth of integrated peripherals to reduce overall BOM cost .... """ See http://www.marvell.com/featured/pxa168.jsp for more information. 1. Marvell Mohawk core is a hybrid of xscale3 and its own ARM core, there are many enhancements like instructions for flushing the whole D-cache, and so on 2. Clock reuses Russell's common clkdev, and added the basic support for UART1/2. 3. Devices are a bit different from the 'mach-pxa' way, the platform devices are now dynamically allocated only when necessary (i.e. when pxa_register_device() is called). Description for each device are stored in an array of 'struct pxa_device_desc'. Now that: a. this array of device description is marked with __initdata and can be freed up system is fully up b. which means board code has to add all needed devices early in his initializing function c. platform specific data can now be marked as __initdata since they are allocated and copied by platform_device_add_data() 4. only the basic UART1/2/3 are added, more devices will come later. Signed-off-by: Jason Chagas <chagas@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-20 14:15:18 +08:00
if ARCH_MMP
[ARM] mmp: add support for Marvell MMP2 Marvell MMP2 (aka ARMADA610) is a SoC based on PJ4 core. It's ARMv6 compatible. Support basic interrupt handler and timer, and basic support for MMP2 based FLINT platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-04 22:41:28 +08:00
menu "Marvell PXA168/910/MMP2 Implmentations"
[ARM] pxa: add base support for Marvell's PXA168 processor line """The Marvell® PXA168 processor is the first in a family of application processors targeted at mass market opportunities in computing and consumer devices. It balances high computing and multimedia performance with low power consumption to support extended battery life, and includes a wealth of integrated peripherals to reduce overall BOM cost .... """ See http://www.marvell.com/featured/pxa168.jsp for more information. 1. Marvell Mohawk core is a hybrid of xscale3 and its own ARM core, there are many enhancements like instructions for flushing the whole D-cache, and so on 2. Clock reuses Russell's common clkdev, and added the basic support for UART1/2. 3. Devices are a bit different from the 'mach-pxa' way, the platform devices are now dynamically allocated only when necessary (i.e. when pxa_register_device() is called). Description for each device are stored in an array of 'struct pxa_device_desc'. Now that: a. this array of device description is marked with __initdata and can be freed up system is fully up b. which means board code has to add all needed devices early in his initializing function c. platform specific data can now be marked as __initdata since they are allocated and copied by platform_device_add_data() 4. only the basic UART1/2/3 are added, more devices will come later. Signed-off-by: Jason Chagas <chagas@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-20 14:15:18 +08:00
ARM: mmp: append OF support on pxa168 Enable PXA168 and aspenite support. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-03-01 13:25:09 +08:00
config MACH_MMP_DT
bool "Support MMP2 platforms from device tree"
select CPU_PXA168
select CPU_PXA910
select USE_OF
help
Include support for Marvell MMP2 based platforms using
the device tree. Needn't select any other machine while
MACH_MMP_DT is enabled.
[ARM] pxa: add base support for Marvell's PXA168 processor line """The Marvell® PXA168 processor is the first in a family of application processors targeted at mass market opportunities in computing and consumer devices. It balances high computing and multimedia performance with low power consumption to support extended battery life, and includes a wealth of integrated peripherals to reduce overall BOM cost .... """ See http://www.marvell.com/featured/pxa168.jsp for more information. 1. Marvell Mohawk core is a hybrid of xscale3 and its own ARM core, there are many enhancements like instructions for flushing the whole D-cache, and so on 2. Clock reuses Russell's common clkdev, and added the basic support for UART1/2. 3. Devices are a bit different from the 'mach-pxa' way, the platform devices are now dynamically allocated only when necessary (i.e. when pxa_register_device() is called). Description for each device are stored in an array of 'struct pxa_device_desc'. Now that: a. this array of device description is marked with __initdata and can be freed up system is fully up b. which means board code has to add all needed devices early in his initializing function c. platform specific data can now be marked as __initdata since they are allocated and copied by platform_device_add_data() 4. only the basic UART1/2/3 are added, more devices will come later. Signed-off-by: Jason Chagas <chagas@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-20 14:15:18 +08:00
config MACH_ASPENITE
bool "Marvell's PXA168 Aspenite Development Board"
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
Aspenite Development Board.
config MACH_ZYLONITE2
bool "Marvell's PXA168 Zylonite2 Development Board"
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
Zylonite2 Development Board.
[ARM] mmp: avengers lite (pxa168) board bring up Signed-off-by: Gavin Gu <gavin.gu@marvell.com> Signed-off-by: Jing Xiang <jxiang@marvell.com> Signed-off-by: Jack Ren <jack.ren@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-12 08:54:50 +08:00
config MACH_AVENGERS_LITE
bool "Marvell's PXA168 Avengers Lite Development Board"
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
Avengers Lite Development Board.
[ARM] pxa: add base support for pxa910-based TavorEVB Signed-off-by: Bin Yang <bin.yang@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-20 13:27:30 +08:00
config MACH_TAVOREVB
bool "Marvell's PXA910 TavorEVB Development Board"
select CPU_PXA910
help
Say 'Y' here if you want to support the Marvell PXA910-based
TavorEVB Development Board.
[ARM] pxa: add base support for pxa910-based TTC_DKB Signed-off-by: Bin Yang <bin.yang@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-20 13:33:49 +08:00
config MACH_TTC_DKB
bool "Marvell's PXA910 TavorEVB Development Board"
select CPU_PXA910
help
Say 'Y' here if you want to support the Marvell PXA910-based
TTC_DKB Development Board.
ARM: mmp: append brownstone support Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-25 11:33:13 +08:00
config MACH_BROWNSTONE
bool "Marvell's Brownstone Development Platform"
depends on !CPU_MOHAWK
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-based
Brown Development Platform.
MMP2-based board can't be co-existed with PXA168-based &
PXA910-based development board. Since MMP2 is compatible to
ARMv7 architecture.
[ARM] mmp: add support for Marvell MMP2 Marvell MMP2 (aka ARMADA610) is a SoC based on PJ4 core. It's ARMv6 compatible. Support basic interrupt handler and timer, and basic support for MMP2 based FLINT platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-04 22:41:28 +08:00
config MACH_FLINT
bool "Marvell's Flint Development Platform"
ARM: mmp: select CPU_PJ4 Since CPU_PJ4 is shared between PXA95x and MMP2, select CPU_PJ4 in MMP2 configuration. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-24 11:54:21 +08:00
depends on !CPU_MOHAWK
[ARM] mmp: add support for Marvell MMP2 Marvell MMP2 (aka ARMADA610) is a SoC based on PJ4 core. It's ARMv6 compatible. Support basic interrupt handler and timer, and basic support for MMP2 based FLINT platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-04 22:41:28 +08:00
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-based
Flint Development Platform.
MMP2-based board can't be co-existed with PXA168-based &
PXA910-based development board. Since MMP2 is compatible to
ARM: mmp: fix the typo - MMP2 is compatible with ARMv7 Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-25 14:21:32 +08:00
ARMv7 architecture.
[ARM] mmp: add support for Marvell MMP2 Marvell MMP2 (aka ARMADA610) is a SoC based on PJ4 core. It's ARMv6 compatible. Support basic interrupt handler and timer, and basic support for MMP2 based FLINT platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-04 22:41:28 +08:00
[ARM] mmp: support jasper development board Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-06 22:07:15 +08:00
config MACH_MARVELL_JASPER
bool "Marvell's Jasper Development Platform"
ARM: mmp: select CPU_PJ4 Since CPU_PJ4 is shared between PXA95x and MMP2, select CPU_PJ4 in MMP2 configuration. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-24 11:54:21 +08:00
depends on !CPU_MOHAWK
[ARM] mmp: support jasper development board Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-06 22:07:15 +08:00
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-base
Jasper Development Platform.
MMP2-based board can't be co-existed with PXA168-based &
PXA910-based development board. Since MMP2 is compatible to
ARM: mmp: fix the typo - MMP2 is compatible with ARMv7 Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-25 14:21:32 +08:00
ARMv7 architecture.
[ARM] mmp: support jasper development board Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-06 22:07:15 +08:00
ARM: pxa168: added support for Teton BGA platform Added board defintion, header, and debug UART support. Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-09-13 11:51:34 +08:00
config MACH_TETON_BGA
bool "Marvell's PXA168 Teton BGA Development Board"
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
Teton BGA Development Board.
ARM: mmp: rename SHEEVAD to GPLUGD GuruPlugD was initially named to be SHEEVAD, and it's causing naming confusion in the mach-types database. Make it consistent by renaming to GPLUGD. Reported-and-Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-16 12:28:57 +08:00
config MACH_GPLUGD
ARM: pxa168: Add board support for gplugD Tested UART console, Ethernet & I2C interfaces Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-05-02 14:00:00 +08:00
bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
select CPU_PXA168
help
Say 'Y' here if you want to support the Marvell PXA168-based
GuruPlug Display (gplugD) Board
[ARM] pxa: add base support for Marvell's PXA168 processor line """The Marvell® PXA168 processor is the first in a family of application processors targeted at mass market opportunities in computing and consumer devices. It balances high computing and multimedia performance with low power consumption to support extended battery life, and includes a wealth of integrated peripherals to reduce overall BOM cost .... """ See http://www.marvell.com/featured/pxa168.jsp for more information. 1. Marvell Mohawk core is a hybrid of xscale3 and its own ARM core, there are many enhancements like instructions for flushing the whole D-cache, and so on 2. Clock reuses Russell's common clkdev, and added the basic support for UART1/2. 3. Devices are a bit different from the 'mach-pxa' way, the platform devices are now dynamically allocated only when necessary (i.e. when pxa_register_device() is called). Description for each device are stored in an array of 'struct pxa_device_desc'. Now that: a. this array of device description is marked with __initdata and can be freed up system is fully up b. which means board code has to add all needed devices early in his initializing function c. platform specific data can now be marked as __initdata since they are allocated and copied by platform_device_add_data() 4. only the basic UART1/2/3 are added, more devices will come later. Signed-off-by: Jason Chagas <chagas@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-20 14:15:18 +08:00
endmenu
config CPU_PXA168
bool
select CPU_MOHAWK
help
Select code specific to PXA168
[ARM] pxa: add base support for Marvell PXA910 Signed-off-by: Bin Yang <bin.yang@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-20 12:50:22 +08:00
config CPU_PXA910
bool
select CPU_MOHAWK
help
Select code specific to PXA910
[ARM] mmp: add support for Marvell MMP2 Marvell MMP2 (aka ARMADA610) is a SoC based on PJ4 core. It's ARMv6 compatible. Support basic interrupt handler and timer, and basic support for MMP2 based FLINT platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-04 22:41:28 +08:00
config CPU_MMP2
bool
ARM: mmp: select CPU_PJ4 Since CPU_PJ4 is shared between PXA95x and MMP2, select CPU_PJ4 in MMP2 configuration. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-24 11:54:21 +08:00
select CPU_PJ4
[ARM] mmp: add support for Marvell MMP2 Marvell MMP2 (aka ARMADA610) is a SoC based on PJ4 core. It's ARMv6 compatible. Support basic interrupt handler and timer, and basic support for MMP2 based FLINT platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-04 22:41:28 +08:00
help
ARM: mmp: select CPU_PJ4 Since CPU_PJ4 is shared between PXA95x and MMP2, select CPU_PJ4 in MMP2 configuration. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-24 11:54:21 +08:00
Select code specific to MMP2. MMP2 is ARMv7 compatible.
[ARM] pxa: add base support for Marvell's PXA168 processor line """The Marvell® PXA168 processor is the first in a family of application processors targeted at mass market opportunities in computing and consumer devices. It balances high computing and multimedia performance with low power consumption to support extended battery life, and includes a wealth of integrated peripherals to reduce overall BOM cost .... """ See http://www.marvell.com/featured/pxa168.jsp for more information. 1. Marvell Mohawk core is a hybrid of xscale3 and its own ARM core, there are many enhancements like instructions for flushing the whole D-cache, and so on 2. Clock reuses Russell's common clkdev, and added the basic support for UART1/2. 3. Devices are a bit different from the 'mach-pxa' way, the platform devices are now dynamically allocated only when necessary (i.e. when pxa_register_device() is called). Description for each device are stored in an array of 'struct pxa_device_desc'. Now that: a. this array of device description is marked with __initdata and can be freed up system is fully up b. which means board code has to add all needed devices early in his initializing function c. platform specific data can now be marked as __initdata since they are allocated and copied by platform_device_add_data() 4. only the basic UART1/2/3 are added, more devices will come later. Signed-off-by: Jason Chagas <chagas@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-20 14:15:18 +08:00
endif