p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/drivers/atm/iphase.c

3300 lines
108 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/******************************************************************************
iphase.c: Device driver for Interphase ATM PCI adapter cards
Author: Peter Wang <pwang@iphase.com>
Some fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Interphase Corporation <www.iphase.com>
Version: 1.0
*******************************************************************************
This software may be used and distributed according to the terms
of the GNU General Public License (GPL), incorporated herein by reference.
Drivers based on this skeleton fall under the GPL and must retain
the authorship (implicit copyright) notice.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
Modified from an incomplete driver for Interphase 5575 1KVC 1M card which
was originally written by Monalisa Agrawal at UNH. Now this driver
supports a variety of varients of Interphase ATM PCI (i)Chip adapter
card family (See www.iphase.com/products/ClassSheet.cfm?ClassID=ATM)
in terms of PHY type, the size of control memory and the size of
packet memory. The followings are the change log and history:
Bugfix the Mona's UBR driver.
Modify the basic memory allocation and dma logic.
Port the driver to the latest kernel from 2.0.46.
Complete the ABR logic of the driver, and added the ABR work-
around for the hardware anormalies.
Add the CBR support.
Add the flow control logic to the driver to allow rate-limit VC.
Add 4K VC support to the board with 512K control memory.
Add the support of all the variants of the Interphase ATM PCI
(i)Chip adapter cards including x575 (155M OC3 and UTP155), x525
(25M UTP25) and x531 (DS3 and E3).
Add SMP support.
Support and updates available at: ftp://ftp.iphase.com/pub/atm
*******************************************************************************/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/atm.h>
#include <linux/atmdev.h>
#include <linux/sonet.h>
#include <linux/skbuff.h>
#include <linux/time.h>
#include <linux/delay.h>
#include <linux/uio.h>
#include <linux/init.h>
net: remove interrupt.h inclusion from netdevice.h * remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06 18:43:46 +08:00
#include <linux/interrupt.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/wait.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/io.h>
atomic: use <linux/atomic.h> This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 07:09:06 +08:00
#include <linux/atomic.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/uaccess.h>
#include <asm/string.h>
#include <asm/byteorder.h>
drivers/atm: use time_before, time_before_eq, etc The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. A simplified version of the semantic patch making this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ change_compare_np @ expression E; @@ ( - jiffies <= E + time_before_eq(jiffies,E) | - jiffies >= E + time_after_eq(jiffies,E) | - jiffies < E + time_before(jiffies,E) | - jiffies > E + time_after(jiffies,E) ) @ include depends on change_compare_np @ @@ #include <linux/jiffies.h> @ no_include depends on !include && change_compare_np @ @@ #include <linux/...> + #include <linux/jiffies.h> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-20 09:14:50 +08:00
#include <linux/vmalloc.h>
#include <linux/jiffies.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include "iphase.h"
#include "suni.h"
generic swap(): iphase: rename swap() to swap_byte_order() In preparation for the introduction of a generic swap() macro. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 10:09:10 +08:00
#define swap_byte_order(x) (((x & 0xff) << 8) | ((x & 0xff00) >> 8))
atm: [iphase] move struct suni_priv to suni.h Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-18 07:18:49 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PRIV(dev) ((struct suni_priv *) dev->phy_data)
static unsigned char ia_phy_get(struct atm_dev *dev, unsigned long addr);
static void desc_dbg(IADEV *iadev);
static IADEV *ia_dev[8];
static struct atm_dev *_ia_dev[8];
static int iadev_count;
static void ia_led_timer(unsigned long arg);
[PATCH] timer initialization cleanup: DEFINE_TIMER Clean up timer initialization by introducing DEFINE_TIMER a'la DEFINE_SPINLOCK. Build and boot-tested on x86. A similar patch has been been in the -RT tree for some time. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:10:40 +08:00
static DEFINE_TIMER(ia_timer, ia_led_timer, 0, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int IA_TX_BUF = DFL_TX_BUFFERS, IA_TX_BUF_SZ = DFL_TX_BUF_SZ;
static int IA_RX_BUF = DFL_RX_BUFFERS, IA_RX_BUF_SZ = DFL_RX_BUF_SZ;
static uint IADebugFlag = /* IF_IADBG_ERR | IF_IADBG_CBR| IF_IADBG_INIT_ADAPTER
|IF_IADBG_ABR | IF_IADBG_EVENT*/ 0;
module_param(IA_TX_BUF, int, 0);
module_param(IA_TX_BUF_SZ, int, 0);
module_param(IA_RX_BUF, int, 0);
module_param(IA_RX_BUF_SZ, int, 0);
module_param(IADebugFlag, uint, 0644);
MODULE_LICENSE("GPL");
/**************************** IA_LIB **********************************/
static void ia_init_rtn_q (IARTN_Q *que)
{
que->next = NULL;
que->tail = NULL;
}
static void ia_enque_head_rtn_q (IARTN_Q *que, IARTN_Q * data)
{
data->next = NULL;
if (que->next == NULL)
que->next = que->tail = data;
else {
data->next = que->next;
que->next = data;
}
return;
}
static int ia_enque_rtn_q (IARTN_Q *que, struct desc_tbl_t data) {
IARTN_Q *entry = kmalloc(sizeof(*entry), GFP_ATOMIC);
atm: iphase: return -ENOMEM instead of -1 in case of failed kmalloc() Smatch complains about returning hard coded error codes, silence this warning. drivers/atm/iphase.c:115 ia_enque_rtn_q() warn: returning -1 instead of -ENOMEM is sloppy Signed-off-by: Tillmann Heidsieck <theidsieck@leenox.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11 03:47:18 +08:00
if (!entry)
return -ENOMEM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
entry->data = data;
entry->next = NULL;
if (que->next == NULL)
que->next = que->tail = entry;
else {
que->tail->next = entry;
que->tail = que->tail->next;
}
return 1;
}
static IARTN_Q * ia_deque_rtn_q (IARTN_Q *que) {
IARTN_Q *tmpdata;
if (que->next == NULL)
return NULL;
tmpdata = que->next;
if ( que->next == que->tail)
que->next = que->tail = NULL;
else
que->next = que->next->next;
return tmpdata;
}
static void ia_hack_tcq(IADEV *dev) {
u_short desc1;
u_short tcq_wr;
struct ia_vcc *iavcc_r = NULL;
tcq_wr = readl(dev->seg_reg+TCQ_WR_PTR) & 0xffff;
while (dev->host_tcq_wr != tcq_wr) {
desc1 = *(u_short *)(dev->seg_ram + dev->host_tcq_wr);
if (!desc1) ;
else if (!dev->desc_tbl[desc1 -1].timestamp) {
IF_ABR(printk(" Desc %d is reset at %ld\n", desc1 -1, jiffies);)
*(u_short *) (dev->seg_ram + dev->host_tcq_wr) = 0;
}
else if (dev->desc_tbl[desc1 -1].timestamp) {
if (!(iavcc_r = dev->desc_tbl[desc1 -1].iavcc)) {
printk("IA: Fatal err in get_desc\n");
continue;
}
iavcc_r->vc_desc_cnt--;
dev->desc_tbl[desc1 -1].timestamp = 0;
atm: fix direct casts of pointers to u32 in the InterPhase driver Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:33:05 +08:00
IF_EVENT(printk("ia_hack: return_q skb = 0x%p desc = %d\n",
dev->desc_tbl[desc1 -1].txskb, desc1);)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (iavcc_r->pcr < dev->rate_limit) {
IA_SKB_STATE (dev->desc_tbl[desc1-1].txskb) |= IA_TX_DONE;
if (ia_enque_rtn_q(&dev->tx_return_q, dev->desc_tbl[desc1 -1]) < 0)
printk("ia_hack_tcq: No memory available\n");
}
dev->desc_tbl[desc1 -1].iavcc = NULL;
dev->desc_tbl[desc1 -1].txskb = NULL;
}
dev->host_tcq_wr += 2;
if (dev->host_tcq_wr > dev->ffL.tcq_ed)
dev->host_tcq_wr = dev->ffL.tcq_st;
}
} /* ia_hack_tcq */
static u16 get_desc (IADEV *dev, struct ia_vcc *iavcc) {
u_short desc_num, i;
struct sk_buff *skb;
struct ia_vcc *iavcc_r = NULL;
unsigned long delta;
static unsigned long timer = 0;
int ltimeout;
ia_hack_tcq (dev);
drivers/atm: use time_before, time_before_eq, etc The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. A simplified version of the semantic patch making this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ change_compare_np @ expression E; @@ ( - jiffies <= E + time_before_eq(jiffies,E) | - jiffies >= E + time_after_eq(jiffies,E) | - jiffies < E + time_before(jiffies,E) | - jiffies > E + time_after(jiffies,E) ) @ include depends on change_compare_np @ @@ #include <linux/jiffies.h> @ no_include depends on !include && change_compare_np @ @@ #include <linux/...> + #include <linux/jiffies.h> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-20 09:14:50 +08:00
if((time_after(jiffies,timer+50)) || ((dev->ffL.tcq_rd==dev->host_tcq_wr))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
timer = jiffies;
i=0;
while (i < dev->num_tx_desc) {
if (!dev->desc_tbl[i].timestamp) {
i++;
continue;
}
ltimeout = dev->desc_tbl[i].iavcc->ltimeout;
delta = jiffies - dev->desc_tbl[i].timestamp;
if (delta >= ltimeout) {
IF_ABR(printk("RECOVER run!! desc_tbl %d = %d delta = %ld, time = %ld\n", i,dev->desc_tbl[i].timestamp, delta, jiffies);)
if (dev->ffL.tcq_rd == dev->ffL.tcq_st)
dev->ffL.tcq_rd = dev->ffL.tcq_ed;
else
dev->ffL.tcq_rd -= 2;
*(u_short *)(dev->seg_ram + dev->ffL.tcq_rd) = i+1;
if (!(skb = dev->desc_tbl[i].txskb) ||
!(iavcc_r = dev->desc_tbl[i].iavcc))
printk("Fatal err, desc table vcc or skb is NULL\n");
else
iavcc_r->vc_desc_cnt--;
dev->desc_tbl[i].timestamp = 0;
dev->desc_tbl[i].iavcc = NULL;
dev->desc_tbl[i].txskb = NULL;
}
i++;
} /* while */
}
if (dev->ffL.tcq_rd == dev->host_tcq_wr)
return 0xFFFF;
/* Get the next available descriptor number from TCQ */
desc_num = *(u_short *)(dev->seg_ram + dev->ffL.tcq_rd);
while (!desc_num || (dev->desc_tbl[desc_num -1]).timestamp) {
dev->ffL.tcq_rd += 2;
if (dev->ffL.tcq_rd > dev->ffL.tcq_ed)
drivers/atm: Adjust confusing if indentation Indent the branch of an if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-05 18:25:24 +08:00
dev->ffL.tcq_rd = dev->ffL.tcq_st;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (dev->ffL.tcq_rd == dev->host_tcq_wr)
return 0xFFFF;
desc_num = *(u_short *)(dev->seg_ram + dev->ffL.tcq_rd);
}
/* get system time */
dev->desc_tbl[desc_num -1].timestamp = jiffies;
return desc_num;
}
static void clear_lockup (struct atm_vcc *vcc, IADEV *dev) {
u_char foundLockUp;
vcstatus_t *vcstatus;
u_short *shd_tbl;
u_short tempCellSlot, tempFract;
struct main_vc *abr_vc = (struct main_vc *)dev->MAIN_VC_TABLE_ADDR;
struct ext_vc *eabr_vc = (struct ext_vc *)dev->EXT_VC_TABLE_ADDR;
u_int i;
if (vcc->qos.txtp.traffic_class == ATM_ABR) {
vcstatus = (vcstatus_t *) &(dev->testTable[vcc->vci]->vc_status);
vcstatus->cnt++;
foundLockUp = 0;
if( vcstatus->cnt == 0x05 ) {
abr_vc += vcc->vci;
eabr_vc += vcc->vci;
if( eabr_vc->last_desc ) {
if( (abr_vc->status & 0x07) == ABR_STATE /* 0x2 */ ) {
/* Wait for 10 Micro sec */
udelay(10);
if ((eabr_vc->last_desc)&&((abr_vc->status & 0x07)==ABR_STATE))
foundLockUp = 1;
}
else {
tempCellSlot = abr_vc->last_cell_slot;
tempFract = abr_vc->fraction;
if((tempCellSlot == dev->testTable[vcc->vci]->lastTime)
&& (tempFract == dev->testTable[vcc->vci]->fract))
foundLockUp = 1;
dev->testTable[vcc->vci]->lastTime = tempCellSlot;
dev->testTable[vcc->vci]->fract = tempFract;
}
} /* last descriptor */
vcstatus->cnt = 0;
} /* vcstatus->cnt */
if (foundLockUp) {
IF_ABR(printk("LOCK UP found\n");)
writew(0xFFFD, dev->seg_reg+MODE_REG_0);
/* Wait for 10 Micro sec */
udelay(10);
abr_vc->status &= 0xFFF8;
abr_vc->status |= 0x0001; /* state is idle */
shd_tbl = (u_short *)dev->ABR_SCHED_TABLE_ADDR;
for( i = 0; ((i < dev->num_vc) && (shd_tbl[i])); i++ );
if (i < dev->num_vc)
shd_tbl[i] = vcc->vci;
else
IF_ERR(printk("ABR Seg. may not continue on VC %x\n",vcc->vci);)
writew(T_ONLINE, dev->seg_reg+MODE_REG_0);
writew(~(TRANSMIT_DONE|TCQ_NOT_EMPTY), dev->seg_reg+SEG_MASK_REG);
writew(TRANSMIT_DONE, dev->seg_reg+SEG_INTR_STATUS_REG);
vcstatus->cnt = 0;
} /* foundLockUp */
} /* if an ABR VC */
}
/*
** Conversion of 24-bit cellrate (cells/sec) to 16-bit floating point format.
**
** +----+----+------------------+-------------------------------+
** | R | NZ | 5-bit exponent | 9-bit mantissa |
** +----+----+------------------+-------------------------------+
**
Fix misc .c/.h comment typos Fix various .c/.h typos in comments (no code changes). Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-30 12:24:39 +08:00
** R = reserved (written as 0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
** NZ = 0 if 0 cells/sec; 1 otherwise
**
** if NZ = 1, rate = 1.mmmmmmmmm x 2^(eeeee) cells/sec
*/
static u16
cellrate_to_float(u32 cr)
{
#define NZ 0x4000
#define M_BITS 9 /* Number of bits in mantissa */
#define E_BITS 5 /* Number of bits in exponent */
#define M_MASK 0x1ff
#define E_MASK 0x1f
u16 flot;
u32 tmp = cr & 0x00ffffff;
int i = 0;
if (cr == 0)
return 0;
while (tmp != 1) {
tmp >>= 1;
i++;
}
if (i == M_BITS)
flot = NZ | (i << M_BITS) | (cr & M_MASK);
else if (i < M_BITS)
flot = NZ | (i << M_BITS) | ((cr << (M_BITS - i)) & M_MASK);
else
flot = NZ | (i << M_BITS) | ((cr >> (i - M_BITS)) & M_MASK);
return flot;
}
#if 0
/*
** Conversion of 16-bit floating point format to 24-bit cellrate (cells/sec).
*/
static u32
float_to_cellrate(u16 rate)
{
u32 exp, mantissa, cps;
if ((rate & NZ) == 0)
return 0;
exp = (rate >> M_BITS) & E_MASK;
mantissa = rate & M_MASK;
if (exp == 0)
return 1;
cps = (1 << M_BITS) | mantissa;
if (exp == M_BITS)
cps = cps;
else if (exp > M_BITS)
cps <<= (exp - M_BITS);
else
cps >>= (M_BITS - exp);
return cps;
}
#endif
static void init_abr_vc (IADEV *dev, srv_cls_param_t *srv_p) {
srv_p->class_type = ATM_ABR;
srv_p->pcr = dev->LineRate;
srv_p->mcr = 0;
srv_p->icr = 0x055cb7;
srv_p->tbe = 0xffffff;
srv_p->frtt = 0x3a;
srv_p->rif = 0xf;
srv_p->rdf = 0xb;
srv_p->nrm = 0x4;
srv_p->trm = 0x7;
srv_p->cdf = 0x3;
srv_p->adtf = 50;
}
static int
ia_open_abr_vc(IADEV *dev, srv_cls_param_t *srv_p,
struct atm_vcc *vcc, u8 flag)
{
f_vc_abr_entry *f_abr_vc;
r_vc_abr_entry *r_abr_vc;
u32 icr;
u8 trm, nrm, crm;
u16 adtf, air, *ptr16;
f_abr_vc =(f_vc_abr_entry *)dev->MAIN_VC_TABLE_ADDR;
f_abr_vc += vcc->vci;
switch (flag) {
case 1: /* FFRED initialization */
#if 0 /* sanity check */
if (srv_p->pcr == 0)
return INVALID_PCR;
if (srv_p->pcr > dev->LineRate)
srv_p->pcr = dev->LineRate;
if ((srv_p->mcr + dev->sum_mcr) > dev->LineRate)
return MCR_UNAVAILABLE;
if (srv_p->mcr > srv_p->pcr)
return INVALID_MCR;
if (!(srv_p->icr))
srv_p->icr = srv_p->pcr;
if ((srv_p->icr < srv_p->mcr) || (srv_p->icr > srv_p->pcr))
return INVALID_ICR;
if ((srv_p->tbe < MIN_TBE) || (srv_p->tbe > MAX_TBE))
return INVALID_TBE;
if ((srv_p->frtt < MIN_FRTT) || (srv_p->frtt > MAX_FRTT))
return INVALID_FRTT;
if (srv_p->nrm > MAX_NRM)
return INVALID_NRM;
if (srv_p->trm > MAX_TRM)
return INVALID_TRM;
if (srv_p->adtf > MAX_ADTF)
return INVALID_ADTF;
else if (srv_p->adtf == 0)
srv_p->adtf = 1;
if (srv_p->cdf > MAX_CDF)
return INVALID_CDF;
if (srv_p->rif > MAX_RIF)
return INVALID_RIF;
if (srv_p->rdf > MAX_RDF)
return INVALID_RDF;
#endif
memset ((caddr_t)f_abr_vc, 0, sizeof(*f_abr_vc));
f_abr_vc->f_vc_type = ABR;
nrm = 2 << srv_p->nrm; /* (2 ** (srv_p->nrm +1)) */
/* i.e 2**n = 2 << (n-1) */
f_abr_vc->f_nrm = nrm << 8 | nrm;
trm = 100000/(2 << (16 - srv_p->trm));
if ( trm == 0) trm = 1;
f_abr_vc->f_nrmexp =(((srv_p->nrm +1) & 0x0f) << 12)|(MRM << 8) | trm;
crm = srv_p->tbe / nrm;
if (crm == 0) crm = 1;
f_abr_vc->f_crm = crm & 0xff;
f_abr_vc->f_pcr = cellrate_to_float(srv_p->pcr);
icr = min( srv_p->icr, (srv_p->tbe > srv_p->frtt) ?
((srv_p->tbe/srv_p->frtt)*1000000) :
(1000000/(srv_p->frtt/srv_p->tbe)));
f_abr_vc->f_icr = cellrate_to_float(icr);
adtf = (10000 * srv_p->adtf)/8192;
if (adtf == 0) adtf = 1;
f_abr_vc->f_cdf = ((7 - srv_p->cdf) << 12 | adtf) & 0xfff;
f_abr_vc->f_mcr = cellrate_to_float(srv_p->mcr);
f_abr_vc->f_acr = f_abr_vc->f_icr;
f_abr_vc->f_status = 0x0042;
break;
case 0: /* RFRED initialization */
ptr16 = (u_short *)(dev->reass_ram + REASS_TABLE*dev->memSize);
*(ptr16 + vcc->vci) = NO_AAL5_PKT | REASS_ABR;
r_abr_vc = (r_vc_abr_entry*)(dev->reass_ram+ABR_VC_TABLE*dev->memSize);
r_abr_vc += vcc->vci;
r_abr_vc->r_status_rdf = (15 - srv_p->rdf) & 0x000f;
air = srv_p->pcr << (15 - srv_p->rif);
if (air == 0) air = 1;
r_abr_vc->r_air = cellrate_to_float(air);
dev->testTable[vcc->vci]->vc_status = VC_ACTIVE | VC_ABR;
dev->sum_mcr += srv_p->mcr;
dev->n_abr++;
break;
default:
break;
}
return 0;
}
static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) {
u32 rateLow=0, rateHigh, rate;
int entries;
struct ia_vcc *ia_vcc;
int idealSlot =0, testSlot, toBeAssigned, inc;
u32 spacing;
u16 *SchedTbl, *TstSchedTbl;
u16 cbrVC, vcIndex;
u32 fracSlot = 0;
u32 sp_mod = 0;
u32 sp_mod2 = 0;
/* IpAdjustTrafficParams */
if (vcc->qos.txtp.max_pcr <= 0) {
IF_ERR(printk("PCR for CBR not defined\n");)
return -1;
}
rate = vcc->qos.txtp.max_pcr;
entries = rate / dev->Granularity;
IF_CBR(printk("CBR: CBR entries=0x%x for rate=0x%x & Gran=0x%x\n",
entries, rate, dev->Granularity);)
if (entries < 1)
IF_CBR(printk("CBR: Bandwidth smaller than granularity of CBR table\n");)
rateLow = entries * dev->Granularity;
rateHigh = (entries + 1) * dev->Granularity;
if (3*(rate - rateLow) > (rateHigh - rate))
entries++;
if (entries > dev->CbrRemEntries) {
IF_CBR(printk("CBR: Not enough bandwidth to support this PCR.\n");)
IF_CBR(printk("Entries = 0x%x, CbrRemEntries = 0x%x.\n",
entries, dev->CbrRemEntries);)
return -EBUSY;
}
ia_vcc = INPH_IA_VCC(vcc);
ia_vcc->NumCbrEntry = entries;
dev->sum_mcr += entries * dev->Granularity;
/* IaFFrednInsertCbrSched */
// Starting at an arbitrary location, place the entries into the table
// as smoothly as possible
cbrVC = 0;
spacing = dev->CbrTotEntries / entries;
sp_mod = dev->CbrTotEntries % entries; // get modulo
toBeAssigned = entries;
fracSlot = 0;
vcIndex = vcc->vci;
IF_CBR(printk("Vci=0x%x,Spacing=0x%x,Sp_mod=0x%x\n",vcIndex,spacing,sp_mod);)
while (toBeAssigned)
{
// If this is the first time, start the table loading for this connection
// as close to entryPoint as possible.
if (toBeAssigned == entries)
{
idealSlot = dev->CbrEntryPt;
dev->CbrEntryPt += 2; // Adding 2 helps to prevent clumping
if (dev->CbrEntryPt >= dev->CbrTotEntries)
dev->CbrEntryPt -= dev->CbrTotEntries;// Wrap if necessary
} else {
idealSlot += (u32)(spacing + fracSlot); // Point to the next location
// in the table that would be smoothest
fracSlot = ((sp_mod + sp_mod2) / entries); // get new integer part
sp_mod2 = ((sp_mod + sp_mod2) % entries); // calc new fractional part
}
if (idealSlot >= (int)dev->CbrTotEntries)
idealSlot -= dev->CbrTotEntries;
// Continuously check around this ideal value until a null
// location is encountered.
SchedTbl = (u16*)(dev->seg_ram+CBR_SCHED_TABLE*dev->memSize);
inc = 0;
testSlot = idealSlot;
TstSchedTbl = (u16*)(SchedTbl+testSlot); //set index and read in value
atm: fix direct casts of pointers to u32 in the InterPhase driver Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:33:05 +08:00
IF_CBR(printk("CBR Testslot 0x%x AT Location 0x%p, NumToAssign=%d\n",
testSlot, TstSchedTbl,toBeAssigned);)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC));
while (cbrVC) // If another VC at this location, we have to keep looking
{
inc++;
testSlot = idealSlot - inc;
if (testSlot < 0) { // Wrap if necessary
testSlot += dev->CbrTotEntries;
atm: fix direct casts of pointers to u32 in the InterPhase driver Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:33:05 +08:00
IF_CBR(printk("Testslot Wrap. STable Start=0x%p,Testslot=%d\n",
SchedTbl,testSlot);)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
TstSchedTbl = (u16 *)(SchedTbl + testSlot); // set table index
memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC));
if (!cbrVC)
break;
testSlot = idealSlot + inc;
if (testSlot >= (int)dev->CbrTotEntries) { // Wrap if necessary
testSlot -= dev->CbrTotEntries;
IF_CBR(printk("TotCbrEntries=%d",dev->CbrTotEntries);)
IF_CBR(printk(" Testslot=0x%x ToBeAssgned=%d\n",
testSlot, toBeAssigned);)
}
// set table index and read in value
TstSchedTbl = (u16*)(SchedTbl + testSlot);
atm: fix direct casts of pointers to u32 in the InterPhase driver Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:33:05 +08:00
IF_CBR(printk("Reading CBR Tbl from 0x%p, CbrVal=0x%x Iteration %d\n",
TstSchedTbl,cbrVC,inc);)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC));
} /* while */
// Move this VCI number into this location of the CBR Sched table.
drivers/atm: Correct code taking the size of a pointer sizeof(TstSchedTbl) is just the size of the pointer. Change it to the size of the referenced data. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *x; expression f; type T; @@ *f(...,(T)x,...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-13 09:40:55 +08:00
memcpy((caddr_t)TstSchedTbl, (caddr_t)&vcIndex, sizeof(*TstSchedTbl));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev->CbrRemEntries--;
toBeAssigned--;
} /* while */
/* IaFFrednCbrEnable */
dev->NumEnabledCBR++;
if (dev->NumEnabledCBR == 1) {
writew((CBR_EN | UBR_EN | ABR_EN | (0x23 << 2)), dev->seg_reg+STPARMS);
IF_CBR(printk("CBR is enabled\n");)
}
return 0;
}
static void ia_cbrVc_close (struct atm_vcc *vcc) {
IADEV *iadev;
u16 *SchedTbl, NullVci = 0;
u32 i, NumFound;
iadev = INPH_IA_DEV(vcc->dev);
iadev->NumEnabledCBR--;
SchedTbl = (u16*)(iadev->seg_ram+CBR_SCHED_TABLE*iadev->memSize);
if (iadev->NumEnabledCBR == 0) {
writew((UBR_EN | ABR_EN | (0x23 << 2)), iadev->seg_reg+STPARMS);
IF_CBR (printk("CBR support disabled\n");)
}
NumFound = 0;
for (i=0; i < iadev->CbrTotEntries; i++)
{
if (*SchedTbl == vcc->vci) {
iadev->CbrRemEntries++;
*SchedTbl = NullVci;
IF_CBR(NumFound++;)
}
SchedTbl++;
}
IF_CBR(printk("Exit ia_cbrVc_close, NumRemoved=%d\n",NumFound);)
}
static int ia_avail_descs(IADEV *iadev) {
int tmp = 0;
ia_hack_tcq(iadev);
if (iadev->host_tcq_wr >= iadev->ffL.tcq_rd)
tmp = (iadev->host_tcq_wr - iadev->ffL.tcq_rd) / 2;
else
tmp = (iadev->ffL.tcq_ed - iadev->ffL.tcq_rd + 2 + iadev->host_tcq_wr -
iadev->ffL.tcq_st) / 2;
return tmp;
}
static int ia_pkt_tx (struct atm_vcc *vcc, struct sk_buff *skb);
static int ia_que_tx (IADEV *iadev) {
struct sk_buff *skb;
int num_desc;
struct atm_vcc *vcc;
num_desc = ia_avail_descs(iadev);
while (num_desc && (skb = skb_dequeue(&iadev->tx_backlog))) {
if (!(vcc = ATM_SKB(skb)->vcc)) {
dev_kfree_skb_any(skb);
printk("ia_que_tx: Null vcc\n");
break;
}
if (!test_bit(ATM_VF_READY,&vcc->flags)) {
dev_kfree_skb_any(skb);
printk("Free the SKB on closed vci %d \n", vcc->vci);
break;
}
if (ia_pkt_tx (vcc, skb)) {
skb_queue_head(&iadev->tx_backlog, skb);
}
num_desc--;
}
return 0;
}
static void ia_tx_poll (IADEV *iadev) {
struct atm_vcc *vcc = NULL;
struct sk_buff *skb = NULL, *skb1 = NULL;
struct ia_vcc *iavcc;
IARTN_Q * rtne;
ia_hack_tcq(iadev);
while ( (rtne = ia_deque_rtn_q(&iadev->tx_return_q))) {
skb = rtne->data.txskb;
if (!skb) {
printk("ia_tx_poll: skb is null\n");
goto out;
}
vcc = ATM_SKB(skb)->vcc;
if (!vcc) {
printk("ia_tx_poll: vcc is null\n");
dev_kfree_skb_any(skb);
goto out;
}
iavcc = INPH_IA_VCC(vcc);
if (!iavcc) {
printk("ia_tx_poll: iavcc is null\n");
dev_kfree_skb_any(skb);
goto out;
}
skb1 = skb_dequeue(&iavcc->txing_skb);
while (skb1 && (skb1 != skb)) {
if (!(IA_SKB_STATE(skb1) & IA_TX_DONE)) {
printk("IA_tx_intr: Vci %d lost pkt!!!\n", vcc->vci);
}
IF_ERR(printk("Release the SKB not match\n");)
if ((vcc->pop) && (skb1->len != 0))
{
vcc->pop(vcc, skb1);
IF_EVENT(printk("Tansmit Done - skb 0x%lx return\n",
(long)skb1);)
}
else
dev_kfree_skb_any(skb1);
skb1 = skb_dequeue(&iavcc->txing_skb);
}
if (!skb1) {
IF_EVENT(printk("IA: Vci %d - skb not found requed\n",vcc->vci);)
ia_enque_head_rtn_q (&iadev->tx_return_q, rtne);
break;
}
if ((vcc->pop) && (skb->len != 0))
{
vcc->pop(vcc, skb);
IF_EVENT(printk("Tx Done - skb 0x%lx return\n",(long)skb);)
}
else
dev_kfree_skb_any(skb);
kfree(rtne);
}
ia_que_tx(iadev);
out:
return;
}
#if 0
static void ia_eeprom_put (IADEV *iadev, u32 addr, u_short val)
{
u32 t;
int i;
/*
* Issue a command to enable writes to the NOVRAM
*/
NVRAM_CMD (EXTEND + EWEN);
NVRAM_CLR_CE;
/*
* issue the write command
*/
NVRAM_CMD(IAWRITE + addr);
/*
* Send the data, starting with D15, then D14, and so on for 16 bits
*/
for (i=15; i>=0; i--) {
NVRAM_CLKOUT (val & 0x8000);
val <<= 1;
}
NVRAM_CLR_CE;
CFG_OR(NVCE);
t = readl(iadev->reg+IPHASE5575_EEPROM_ACCESS);
while (!(t & NVDO))
t = readl(iadev->reg+IPHASE5575_EEPROM_ACCESS);
NVRAM_CLR_CE;
/*
* disable writes again
*/
NVRAM_CMD(EXTEND + EWDS)
NVRAM_CLR_CE;
CFG_AND(~NVDI);
}
#endif
static u16 ia_eeprom_get (IADEV *iadev, u32 addr)
{
u_short val;
u32 t;
int i;
/*
* Read the first bit that was clocked with the falling edge of the
* the last command data clock
*/
NVRAM_CMD(IAREAD + addr);
/*
* Now read the rest of the bits, the next bit read is D14, then D13,
* and so on.
*/
val = 0;
for (i=15; i>=0; i--) {
NVRAM_CLKIN(t);
val |= (t << i);
}
NVRAM_CLR_CE;
CFG_AND(~NVDI);
return val;
}
static void ia_hw_type(IADEV *iadev) {
u_short memType = ia_eeprom_get(iadev, 25);
iadev->memType = memType;
if ((memType & MEM_SIZE_MASK) == MEM_SIZE_1M) {
iadev->num_tx_desc = IA_TX_BUF;
iadev->tx_buf_sz = IA_TX_BUF_SZ;
iadev->num_rx_desc = IA_RX_BUF;
iadev->rx_buf_sz = IA_RX_BUF_SZ;
} else if ((memType & MEM_SIZE_MASK) == MEM_SIZE_512K) {
if (IA_TX_BUF == DFL_TX_BUFFERS)
iadev->num_tx_desc = IA_TX_BUF / 2;
else
iadev->num_tx_desc = IA_TX_BUF;
iadev->tx_buf_sz = IA_TX_BUF_SZ;
if (IA_RX_BUF == DFL_RX_BUFFERS)
iadev->num_rx_desc = IA_RX_BUF / 2;
else
iadev->num_rx_desc = IA_RX_BUF;
iadev->rx_buf_sz = IA_RX_BUF_SZ;
}
else {
if (IA_TX_BUF == DFL_TX_BUFFERS)
iadev->num_tx_desc = IA_TX_BUF / 8;
else
iadev->num_tx_desc = IA_TX_BUF;
iadev->tx_buf_sz = IA_TX_BUF_SZ;
if (IA_RX_BUF == DFL_RX_BUFFERS)
iadev->num_rx_desc = IA_RX_BUF / 8;
else
iadev->num_rx_desc = IA_RX_BUF;
iadev->rx_buf_sz = IA_RX_BUF_SZ;
}
iadev->rx_pkt_ram = TX_PACKET_RAM + (iadev->num_tx_desc * iadev->tx_buf_sz);
IF_INIT(printk("BUF: tx=%d,sz=%d rx=%d sz= %d rx_pkt_ram=%d\n",
iadev->num_tx_desc, iadev->tx_buf_sz, iadev->num_rx_desc,
iadev->rx_buf_sz, iadev->rx_pkt_ram);)
#if 0
if ((memType & FE_MASK) == FE_SINGLE_MODE) {
iadev->phy_type = PHY_OC3C_S;
else if ((memType & FE_MASK) == FE_UTP_OPTION)
iadev->phy_type = PHY_UTP155;
else
iadev->phy_type = PHY_OC3C_M;
#endif
iadev->phy_type = memType & FE_MASK;
IF_INIT(printk("memType = 0x%x iadev->phy_type = 0x%x\n",
memType,iadev->phy_type);)
if (iadev->phy_type == FE_25MBIT_PHY)
iadev->LineRate = (u32)(((25600000/8)*26)/(27*53));
else if (iadev->phy_type == FE_DS3_PHY)
iadev->LineRate = (u32)(((44736000/8)*26)/(27*53));
else if (iadev->phy_type == FE_E3_PHY)
iadev->LineRate = (u32)(((34368000/8)*26)/(27*53));
else
iadev->LineRate = (u32)(ATM_OC3_PCR);
IF_INIT(printk("iadev->LineRate = %d \n", iadev->LineRate);)
}
atm/iphase : removal of PCI space dereferences. Mostly PHY access and a few (ugly) debug statements for DMA control. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30 08:37:43 +08:00
static u32 ia_phy_read32(struct iadev_priv *ia, unsigned int reg)
{
return readl(ia->phy + (reg >> 2));
}
static void ia_phy_write32(struct iadev_priv *ia, unsigned int reg, u32 val)
{
writel(val, ia->phy + (reg >> 2));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
atm/iphase : removal of PCI space dereferences. Mostly PHY access and a few (ugly) debug statements for DMA control. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30 08:37:43 +08:00
static void ia_frontend_intr(struct iadev_priv *iadev)
{
u32 status;
if (iadev->phy_type & FE_25MBIT_PHY) {
status = ia_phy_read32(iadev, MB25_INTR_STATUS);
iadev->carrier_detect = (status & MB25_IS_GSB) ? 1 : 0;
} else if (iadev->phy_type & FE_DS3_PHY) {
ia_phy_read32(iadev, SUNI_DS3_FRM_INTR_STAT);
status = ia_phy_read32(iadev, SUNI_DS3_FRM_STAT);
iadev->carrier_detect = (status & SUNI_DS3_LOSV) ? 0 : 1;
} else if (iadev->phy_type & FE_E3_PHY) {
ia_phy_read32(iadev, SUNI_E3_FRM_MAINT_INTR_IND);
status = ia_phy_read32(iadev, SUNI_E3_FRM_FRAM_INTR_IND_STAT);
iadev->carrier_detect = (status & SUNI_E3_LOS) ? 0 : 1;
} else {
status = ia_phy_read32(iadev, SUNI_RSOP_STATUS);
iadev->carrier_detect = (status & SUNI_LOSV) ? 0 : 1;
}
printk(KERN_INFO "IA: SUNI carrier %s\n",
iadev->carrier_detect ? "detected" : "lost signal");
}
static void ia_mb25_init(struct iadev_priv *iadev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
#if 0
mb25->mb25_master_ctrl = MB25_MC_DRIC | MB25_MC_DREC | MB25_MC_ENABLED;
#endif
atm/iphase : removal of PCI space dereferences. Mostly PHY access and a few (ugly) debug statements for DMA control. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30 08:37:43 +08:00
ia_phy_write32(iadev, MB25_MASTER_CTRL, MB25_MC_DRIC | MB25_MC_DREC);
ia_phy_write32(iadev, MB25_DIAG_CONTROL, 0);
iadev->carrier_detect =
(ia_phy_read32(iadev, MB25_INTR_STATUS) & MB25_IS_GSB) ? 1 : 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
atm/iphase : removal of PCI space dereferences. Mostly PHY access and a few (ugly) debug statements for DMA control. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30 08:37:43 +08:00
struct ia_reg {
u16 reg;
u16 val;
};
static void ia_phy_write(struct iadev_priv *iadev,
const struct ia_reg *regs, int len)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
atm/iphase : removal of PCI space dereferences. Mostly PHY access and a few (ugly) debug statements for DMA control. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30 08:37:43 +08:00
while (len--) {
ia_phy_write32(iadev, regs->reg, regs->val);
regs++;
}
}
static void ia_suni_pm7345_init_ds3(struct iadev_priv *iadev)
{
static const struct ia_reg suni_ds3_init [] = {
{ SUNI_DS3_FRM_INTR_ENBL, 0x17 },
{ SUNI_DS3_FRM_CFG, 0x01 },
{ SUNI_DS3_TRAN_CFG, 0x01 },
{ SUNI_CONFIG, 0 },
{ SUNI_SPLR_CFG, 0 },
{ SUNI_SPLT_CFG, 0 }
};
u32 status;
status = ia_phy_read32(iadev, SUNI_DS3_FRM_STAT);
iadev->carrier_detect = (status & SUNI_DS3_LOSV) ? 0 : 1;
ia_phy_write(iadev, suni_ds3_init, ARRAY_SIZE(suni_ds3_init));
}
static void ia_suni_pm7345_init_e3(struct iadev_priv *iadev)
{
static const struct ia_reg suni_e3_init [] = {
{ SUNI_E3_FRM_FRAM_OPTIONS, 0x04 },
{ SUNI_E3_FRM_MAINT_OPTIONS, 0x20 },
{ SUNI_E3_FRM_FRAM_INTR_ENBL, 0x1d },
{ SUNI_E3_FRM_MAINT_INTR_ENBL, 0x30 },
{ SUNI_E3_TRAN_STAT_DIAG_OPTIONS, 0 },
{ SUNI_E3_TRAN_FRAM_OPTIONS, 0x01 },
{ SUNI_CONFIG, SUNI_PM7345_E3ENBL },
{ SUNI_SPLR_CFG, 0x41 },
{ SUNI_SPLT_CFG, 0x41 }
};
u32 status;
status = ia_phy_read32(iadev, SUNI_E3_FRM_FRAM_INTR_IND_STAT);
iadev->carrier_detect = (status & SUNI_E3_LOS) ? 0 : 1;
ia_phy_write(iadev, suni_e3_init, ARRAY_SIZE(suni_e3_init));
}
static void ia_suni_pm7345_init(struct iadev_priv *iadev)
{
static const struct ia_reg suni_init [] = {
/* Enable RSOP loss of signal interrupt. */
{ SUNI_INTR_ENBL, 0x28 },
/* Clear error counters. */
{ SUNI_ID_RESET, 0 },
/* Clear "PMCTST" in master test register. */
{ SUNI_MASTER_TEST, 0 },
{ SUNI_RXCP_CTRL, 0x2c },
{ SUNI_RXCP_FCTRL, 0x81 },
{ SUNI_RXCP_IDLE_PAT_H1, 0 },
{ SUNI_RXCP_IDLE_PAT_H2, 0 },
{ SUNI_RXCP_IDLE_PAT_H3, 0 },
{ SUNI_RXCP_IDLE_PAT_H4, 0x01 },
{ SUNI_RXCP_IDLE_MASK_H1, 0xff },
{ SUNI_RXCP_IDLE_MASK_H2, 0xff },
{ SUNI_RXCP_IDLE_MASK_H3, 0xff },
{ SUNI_RXCP_IDLE_MASK_H4, 0xfe },
{ SUNI_RXCP_CELL_PAT_H1, 0 },
{ SUNI_RXCP_CELL_PAT_H2, 0 },
{ SUNI_RXCP_CELL_PAT_H3, 0 },
{ SUNI_RXCP_CELL_PAT_H4, 0x01 },
{ SUNI_RXCP_CELL_MASK_H1, 0xff },
{ SUNI_RXCP_CELL_MASK_H2, 0xff },
{ SUNI_RXCP_CELL_MASK_H3, 0xff },
{ SUNI_RXCP_CELL_MASK_H4, 0xff },
{ SUNI_TXCP_CTRL, 0xa4 },
{ SUNI_TXCP_INTR_EN_STS, 0x10 },
{ SUNI_TXCP_IDLE_PAT_H5, 0x55 }
};
if (iadev->phy_type & FE_DS3_PHY)
ia_suni_pm7345_init_ds3(iadev);
else
ia_suni_pm7345_init_e3(iadev);
ia_phy_write(iadev, suni_init, ARRAY_SIZE(suni_init));
ia_phy_write32(iadev, SUNI_CONFIG, ia_phy_read32(iadev, SUNI_CONFIG) &
~(SUNI_PM7345_LLB | SUNI_PM7345_CLB |
SUNI_PM7345_DLB | SUNI_PM7345_PLB));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef __SNMP__
suni_pm7345->suni_rxcp_intr_en_sts |= SUNI_OOCDE;
#endif /* __SNMP__ */
return;
}
/***************************** IA_LIB END *****************************/
[ATM] drivers/atm/iphase.c: compilation warning fix Removed the warning messages: drivers/atm/iphase.c:961: warning: 'tcnter' defined but not used drivers/atm/iphase.c:963: warning: 'xdump' defined but not used tcnter and xdump() are used only in debug build Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02 15:03:00 +08:00
#ifdef CONFIG_ATM_IA_DEBUG
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int tcnter = 0;
static void xdump( u_char* cp, int length, char* prefix )
{
int col, count;
u_char prntBuf[120];
u_char* pBuf = prntBuf;
count = 0;
while(count < length){
pBuf += sprintf( pBuf, "%s", prefix );
for(col = 0;count + col < length && col < 16; col++){
if (col != 0 && (col % 4) == 0)
pBuf += sprintf( pBuf, " " );
pBuf += sprintf( pBuf, "%02X ", cp[count + col] );
}
while(col++ < 16){ /* pad end of buffer with blanks */
if ((col % 4) == 0)
sprintf( pBuf, " " );
pBuf += sprintf( pBuf, " " );
}
pBuf += sprintf( pBuf, " " );
for(col = 0;count + col < length && col < 16; col++){
if (isprint((int)cp[count + col]))
pBuf += sprintf( pBuf, "%c", cp[count + col] );
else
pBuf += sprintf( pBuf, "." );
}
atm: fix non-const printk argument Change printk() argument to fix compiler warning. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-20 14:44:02 +08:00
printk("%s\n", prntBuf);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
count += col;
pBuf = prntBuf;
}
} /* close xdump(... */
[ATM] drivers/atm/iphase.c: compilation warning fix Removed the warning messages: drivers/atm/iphase.c:961: warning: 'tcnter' defined but not used drivers/atm/iphase.c:963: warning: 'xdump' defined but not used tcnter and xdump() are used only in debug build Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02 15:03:00 +08:00
#endif /* CONFIG_ATM_IA_DEBUG */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static struct atm_dev *ia_boards = NULL;
#define ACTUAL_RAM_BASE \
RAM_BASE*((iadev->mem)/(128 * 1024))
#define ACTUAL_SEG_RAM_BASE \
IPHASE5575_FRAG_CONTROL_RAM_BASE*((iadev->mem)/(128 * 1024))
#define ACTUAL_REASS_RAM_BASE \
IPHASE5575_REASS_CONTROL_RAM_BASE*((iadev->mem)/(128 * 1024))
/*-- some utilities and memory allocation stuff will come here -------------*/
static void desc_dbg(IADEV *iadev) {
u_short tcq_wr_ptr, tcq_st_ptr, tcq_ed_ptr;
u32 i;
void __iomem *tmp;
// regval = readl((u32)ia_cmds->maddr);
tcq_wr_ptr = readw(iadev->seg_reg+TCQ_WR_PTR);
printk("B_tcq_wr = 0x%x desc = %d last desc = %d\n",
tcq_wr_ptr, readw(iadev->seg_ram+tcq_wr_ptr),
readw(iadev->seg_ram+tcq_wr_ptr-2));
printk(" host_tcq_wr = 0x%x host_tcq_rd = 0x%x \n", iadev->host_tcq_wr,
iadev->ffL.tcq_rd);
tcq_st_ptr = readw(iadev->seg_reg+TCQ_ST_ADR);
tcq_ed_ptr = readw(iadev->seg_reg+TCQ_ED_ADR);
printk("tcq_st_ptr = 0x%x tcq_ed_ptr = 0x%x \n", tcq_st_ptr, tcq_ed_ptr);
i = 0;
while (tcq_st_ptr != tcq_ed_ptr) {
tmp = iadev->seg_ram+tcq_st_ptr;
printk("TCQ slot %d desc = %d Addr = %p\n", i++, readw(tmp), tmp);
tcq_st_ptr += 2;
}
for(i=0; i <iadev->num_tx_desc; i++)
printk("Desc_tbl[%d] = %d \n", i, iadev->desc_tbl[i].timestamp);
}
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 09:57:33 +08:00
/*----------------------------- Receiving side stuff --------------------------*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void rx_excp_rcvd(struct atm_dev *dev)
{
#if 0 /* closing the receiving size will cause too many excp int */
IADEV *iadev;
u_short state;
u_short excpq_rd_ptr;
//u_short *ptr;
int vci, error = 1;
iadev = INPH_IA_DEV(dev);
state = readl(iadev->reass_reg + STATE_REG) & 0xffff;
while((state & EXCPQ_EMPTY) != EXCPQ_EMPTY)
{ printk("state = %x \n", state);
excpq_rd_ptr = readw(iadev->reass_reg + EXCP_Q_RD_PTR) & 0xffff;
printk("state = %x excpq_rd_ptr = %x \n", state, excpq_rd_ptr);
if (excpq_rd_ptr == *(u16*)(iadev->reass_reg + EXCP_Q_WR_PTR))
IF_ERR(printk("excpq_rd_ptr is wrong!!!\n");)
// TODO: update exception stat
vci = readw(iadev->reass_ram+excpq_rd_ptr);
error = readw(iadev->reass_ram+excpq_rd_ptr+2) & 0x0007;
// pwang_test
excpq_rd_ptr += 4;
if (excpq_rd_ptr > (readw(iadev->reass_reg + EXCP_Q_ED_ADR)& 0xffff))
excpq_rd_ptr = readw(iadev->reass_reg + EXCP_Q_ST_ADR)& 0xffff;
writew( excpq_rd_ptr, iadev->reass_reg + EXCP_Q_RD_PTR);
state = readl(iadev->reass_reg + STATE_REG) & 0xffff;
}
#endif
}
static void free_desc(struct atm_dev *dev, int desc)
{
IADEV *iadev;
iadev = INPH_IA_DEV(dev);
writew(desc, iadev->reass_ram+iadev->rfL.fdq_wr);
iadev->rfL.fdq_wr +=2;
if (iadev->rfL.fdq_wr > iadev->rfL.fdq_ed)
iadev->rfL.fdq_wr = iadev->rfL.fdq_st;
writew(iadev->rfL.fdq_wr, iadev->reass_reg+FREEQ_WR_PTR);
}
static int rx_pkt(struct atm_dev *dev)
{
IADEV *iadev;
struct atm_vcc *vcc;
unsigned short status;
struct rx_buf_desc __iomem *buf_desc_ptr;
int desc;
struct dle* wr_ptr;
int len;
struct sk_buff *skb;
u_int buf_addr, dma_addr;
iadev = INPH_IA_DEV(dev);
if (iadev->rfL.pcq_rd == (readw(iadev->reass_reg+PCQ_WR_PTR)&0xffff))
{
printk(KERN_ERR DEV_LABEL "(itf %d) Receive queue empty\n", dev->number);
return -EINVAL;
}
/* mask 1st 3 bits to get the actual descno. */
desc = readw(iadev->reass_ram+iadev->rfL.pcq_rd) & 0x1fff;
IF_RX(printk("reass_ram = %p iadev->rfL.pcq_rd = 0x%x desc = %d\n",
iadev->reass_ram, iadev->rfL.pcq_rd, desc);
printk(" pcq_wr_ptr = 0x%x\n",
readw(iadev->reass_reg+PCQ_WR_PTR)&0xffff);)
/* update the read pointer - maybe we shud do this in the end*/
if ( iadev->rfL.pcq_rd== iadev->rfL.pcq_ed)
iadev->rfL.pcq_rd = iadev->rfL.pcq_st;
else
iadev->rfL.pcq_rd += 2;
writew(iadev->rfL.pcq_rd, iadev->reass_reg+PCQ_RD_PTR);
/* get the buffer desc entry.
update stuff. - doesn't seem to be any update necessary
*/
buf_desc_ptr = iadev->RX_DESC_BASE_ADDR;
/* make the ptr point to the corresponding buffer desc entry */
buf_desc_ptr += desc;
if (!desc || (desc > iadev->num_rx_desc) ||
atm: iphase: off by one in rx_pkt() The iadev->rx_open[] array holds "iadev->num_vc" pointers (this code assumes that pointers are 32 bits). So the > here should be >= or else we could end up reading a garbage pointer from one element beyond the end of the array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-27 18:34:35 +08:00
((buf_desc_ptr->vc_index & 0xffff) >= iadev->num_vc)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
free_desc(dev, desc);
IF_ERR(printk("IA: bad descriptor desc = %d \n", desc);)
return -1;
}
vcc = iadev->rx_open[buf_desc_ptr->vc_index & 0xffff];
if (!vcc)
{
free_desc(dev, desc);
printk("IA: null vcc, drop PDU\n");
return -1;
}
/* might want to check the status bits for errors */
status = (u_short) (buf_desc_ptr->desc_mode);
if (status & (RX_CER | RX_PTE | RX_OFL))
{
atomic_inc(&vcc->stats->rx_err);
IF_ERR(printk("IA: bad packet, dropping it");)
if (status & RX_CER) {
IF_ERR(printk(" cause: packet CRC error\n");)
}
else if (status & RX_PTE) {
IF_ERR(printk(" cause: packet time out\n");)
}
else {
tree-wide: fix assorted typos all over the place That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-14 23:09:05 +08:00
IF_ERR(printk(" cause: buffer overflow\n");)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
goto out_free_desc;
}
/*
build DLE.
*/
buf_addr = (buf_desc_ptr->buf_start_hi << 16) | buf_desc_ptr->buf_start_lo;
dma_addr = (buf_desc_ptr->dma_start_hi << 16) | buf_desc_ptr->dma_start_lo;
len = dma_addr - buf_addr;
if (len > iadev->rx_buf_sz) {
printk("Over %d bytes sdu received, dropped!!!\n", iadev->rx_buf_sz);
atomic_inc(&vcc->stats->rx_err);
goto out_free_desc;
}
if (!(skb = atm_alloc_charge(vcc, len, GFP_ATOMIC))) {
if (vcc->vci < 32)
printk("Drop control packets\n");
atm: iphase: fix misleading indention Fix a smatch warning: drivers/atm/iphase.c:1178 rx_pkt() warn: curly braces intended? The code is correct, the indention is misleading. In case the allocation of skb fails, we want to skip to the end. Signed-off-by: Tillmann Heidsieck <theidsieck@leenox.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11 03:47:19 +08:00
goto out_free_desc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
skb_put(skb,len);
// pwang_test
ATM_SKB(skb)->vcc = vcc;
ATM_DESC(skb) = desc;
skb_queue_tail(&iadev->rx_dma_q, skb);
/* Build the DLE structure */
wr_ptr = iadev->rx_dle_q.write;
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
wr_ptr->sys_pkt_addr = dma_map_single(&iadev->pci->dev, skb->data,
len, DMA_FROM_DEVICE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
wr_ptr->local_pkt_addr = buf_addr;
wr_ptr->bytes = len; /* We don't know this do we ?? */
wr_ptr->mode = DMA_INT_ENABLE;
/* shud take care of wrap around here too. */
if(++wr_ptr == iadev->rx_dle_q.end)
wr_ptr = iadev->rx_dle_q.start;
iadev->rx_dle_q.write = wr_ptr;
udelay(1);
/* Increment transaction counter */
writel(1, iadev->dma+IPHASE5575_RX_COUNTER);
out: return 0;
out_free_desc:
free_desc(dev, desc);
goto out;
}
static void rx_intr(struct atm_dev *dev)
{
IADEV *iadev;
u_short status;
u_short state, i;
iadev = INPH_IA_DEV(dev);
status = readl(iadev->reass_reg+REASS_INTR_STATUS_REG) & 0xffff;
IF_EVENT(printk("rx_intr: status = 0x%x\n", status);)
if (status & RX_PKT_RCVD)
{
/* do something */
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 09:57:33 +08:00
/* Basically recvd an interrupt for receiving a packet.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
A descriptor would have been written to the packet complete
queue. Get all the descriptors and set up dma to move the
packets till the packet complete queue is empty..
*/
state = readl(iadev->reass_reg + STATE_REG) & 0xffff;
IF_EVENT(printk("Rx intr status: RX_PKT_RCVD %08x\n", status);)
while(!(state & PCQ_EMPTY))
{
rx_pkt(dev);
state = readl(iadev->reass_reg + STATE_REG) & 0xffff;
}
iadev->rxing = 1;
}
if (status & RX_FREEQ_EMPT)
{
if (iadev->rxing) {
iadev->rx_tmp_cnt = iadev->rx_pkt_cnt;
iadev->rx_tmp_jif = jiffies;
iadev->rxing = 0;
}
drivers/atm: use time_before, time_before_eq, etc The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. A simplified version of the semantic patch making this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ change_compare_np @ expression E; @@ ( - jiffies <= E + time_before_eq(jiffies,E) | - jiffies >= E + time_after_eq(jiffies,E) | - jiffies < E + time_before(jiffies,E) | - jiffies > E + time_after(jiffies,E) ) @ include depends on change_compare_np @ @@ #include <linux/jiffies.h> @ no_include depends on !include && change_compare_np @ @@ #include <linux/...> + #include <linux/jiffies.h> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-20 09:14:50 +08:00
else if ((time_after(jiffies, iadev->rx_tmp_jif + 50)) &&
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
((iadev->rx_pkt_cnt - iadev->rx_tmp_cnt) == 0)) {
for (i = 1; i <= iadev->num_rx_desc; i++)
free_desc(dev, i);
printk("Test logic RUN!!!!\n");
writew( ~(RX_FREEQ_EMPT|RX_EXCP_RCVD),iadev->reass_reg+REASS_MASK_REG);
iadev->rxing = 1;
}
IF_EVENT(printk("Rx intr status: RX_FREEQ_EMPT %08x\n", status);)
}
if (status & RX_EXCP_RCVD)
{
/* probably need to handle the exception queue also. */
IF_EVENT(printk("Rx intr status: RX_EXCP_RCVD %08x\n", status);)
rx_excp_rcvd(dev);
}
if (status & RX_RAW_RCVD)
{
/* need to handle the raw incoming cells. This deepnds on
whether we have programmed to receive the raw cells or not.
Else ignore. */
IF_EVENT(printk("Rx intr status: RX_RAW_RCVD %08x\n", status);)
}
}
static void rx_dle_intr(struct atm_dev *dev)
{
IADEV *iadev;
struct atm_vcc *vcc;
struct sk_buff *skb;
int desc;
u_short state;
struct dle *dle, *cur_dle;
u_int dle_lp;
int len;
iadev = INPH_IA_DEV(dev);
/* free all the dles done, that is just update our own dle read pointer
- do we really need to do this. Think not. */
/* DMA is done, just get all the recevie buffers from the rx dma queue
and push them up to the higher layer protocol. Also free the desc
associated with the buffer. */
dle = iadev->rx_dle_q.read;
dle_lp = readl(iadev->dma+IPHASE5575_RX_LIST_ADDR) & (sizeof(struct dle)*DLE_ENTRIES - 1);
cur_dle = (struct dle*)(iadev->rx_dle_q.start + (dle_lp >> 4));
while(dle != cur_dle)
{
/* free the DMAed skb */
skb = skb_dequeue(&iadev->rx_dma_q);
if (!skb)
goto INCR_DLE;
desc = ATM_DESC(skb);
free_desc(dev, desc);
if (!(len = skb->len))
{
printk("rx_dle_intr: skb len 0\n");
dev_kfree_skb_any(skb);
}
else
{
struct cpcs_trailer *trailer;
u_short length;
struct ia_vcc *ia_vcc;
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_unmap_single(&iadev->pci->dev, iadev->rx_dle_q.write->sys_pkt_addr,
len, DMA_FROM_DEVICE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* no VCC related housekeeping done as yet. lets see */
vcc = ATM_SKB(skb)->vcc;
if (!vcc) {
printk("IA: null vcc\n");
dev_kfree_skb_any(skb);
goto INCR_DLE;
}
ia_vcc = INPH_IA_VCC(vcc);
if (ia_vcc == NULL)
{
atomic_inc(&vcc->stats->rx_err);
atm: eliminate atm_guess_pdu2truesize() Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22 20:51:56 +08:00
atm_return(vcc, skb->truesize);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev_kfree_skb_any(skb);
goto INCR_DLE;
}
// get real pkt length pwang_test
trailer = (struct cpcs_trailer*)((u_char *)skb->data +
skb->len - sizeof(*trailer));
generic swap(): iphase: rename swap() to swap_byte_order() In preparation for the introduction of a generic swap() macro. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 10:09:10 +08:00
length = swap_byte_order(trailer->length);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ((length > iadev->rx_buf_sz) || (length >
(skb->len - sizeof(struct cpcs_trailer))))
{
atomic_inc(&vcc->stats->rx_err);
IF_ERR(printk("rx_dle_intr: Bad AAL5 trailer %d (skb len %d)",
length, skb->len);)
atm: eliminate atm_guess_pdu2truesize() Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22 20:51:56 +08:00
atm_return(vcc, skb->truesize);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev_kfree_skb_any(skb);
goto INCR_DLE;
}
skb_trim(skb, length);
/* Display the packet */
IF_RXPKT(printk("\nDmad Recvd data: len = %d \n", skb->len);
xdump(skb->data, skb->len, "RX: ");
printk("\n");)
IF_RX(printk("rx_dle_intr: skb push");)
vcc->push(vcc,skb);
atomic_inc(&vcc->stats->rx);
iadev->rx_pkt_cnt++;
}
INCR_DLE:
if (++dle == iadev->rx_dle_q.end)
dle = iadev->rx_dle_q.start;
}
iadev->rx_dle_q.read = dle;
/* if the interrupts are masked because there were no free desc available,
unmask them now. */
if (!iadev->rxing) {
state = readl(iadev->reass_reg + STATE_REG) & 0xffff;
if (!(state & FREEQ_EMPTY)) {
state = readl(iadev->reass_reg + REASS_MASK_REG) & 0xffff;
writel(state & ~(RX_FREEQ_EMPT |/* RX_EXCP_RCVD |*/ RX_PKT_RCVD),
iadev->reass_reg+REASS_MASK_REG);
iadev->rxing++;
}
}
}
static int open_rx(struct atm_vcc *vcc)
{
IADEV *iadev;
u_short __iomem *vc_table;
u_short __iomem *reass_ptr;
IF_EVENT(printk("iadev: open_rx %d.%d\n", vcc->vpi, vcc->vci);)
if (vcc->qos.rxtp.traffic_class == ATM_NONE) return 0;
iadev = INPH_IA_DEV(vcc->dev);
if (vcc->qos.rxtp.traffic_class == ATM_ABR) {
if (iadev->phy_type & FE_25MBIT_PHY) {
printk("IA: ABR not support\n");
return -EINVAL;
}
}
/* Make only this VCI in the vc table valid and let all
others be invalid entries */
vc_table = iadev->reass_ram+RX_VC_TABLE*iadev->memSize;
vc_table += vcc->vci;
/* mask the last 6 bits and OR it with 3 for 1K VCs */
*vc_table = vcc->vci << 6;
/* Also keep a list of open rx vcs so that we can attach them with
incoming PDUs later. */
if ((vcc->qos.rxtp.traffic_class == ATM_ABR) ||
(vcc->qos.txtp.traffic_class == ATM_ABR))
{
srv_cls_param_t srv_p;
init_abr_vc(iadev, &srv_p);
ia_open_abr_vc(iadev, &srv_p, vcc, 0);
}
else { /* for UBR later may need to add CBR logic */
reass_ptr = iadev->reass_ram+REASS_TABLE*iadev->memSize;
reass_ptr += vcc->vci;
*reass_ptr = NO_AAL5_PKT;
}
if (iadev->rx_open[vcc->vci])
printk(KERN_CRIT DEV_LABEL "(itf %d): VCI %d already open\n",
vcc->dev->number, vcc->vci);
iadev->rx_open[vcc->vci] = vcc;
return 0;
}
static int rx_init(struct atm_dev *dev)
{
IADEV *iadev;
struct rx_buf_desc __iomem *buf_desc_ptr;
unsigned long rx_pkt_start = 0;
void *dle_addr;
struct abr_vc_table *abr_vc_table;
u16 *vc_table;
u16 *reass_table;
int i,j, vcsize_sel;
u_short freeq_st_adr;
u_short *freeq_start;
iadev = INPH_IA_DEV(dev);
// spin_lock_init(&iadev->rx_lock);
/* Allocate 4k bytes - more aligned than needed (4k boundary) */
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dle_addr = dma_alloc_coherent(&iadev->pci->dev, DLE_TOTAL_SIZE,
&iadev->rx_dle_dma, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!dle_addr) {
printk(KERN_ERR DEV_LABEL "can't allocate DLEs\n");
goto err_out;
}
atm: [iphase] 64-bit cleanup This fixes the most obvious 64-bit problems, but it is still very very broken in other aspects. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-18 07:21:18 +08:00
iadev->rx_dle_q.start = (struct dle *)dle_addr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
iadev->rx_dle_q.read = iadev->rx_dle_q.start;
iadev->rx_dle_q.write = iadev->rx_dle_q.start;
atm: [iphase] 64-bit cleanup This fixes the most obvious 64-bit problems, but it is still very very broken in other aspects. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-18 07:21:18 +08:00
iadev->rx_dle_q.end = (struct dle*)((unsigned long)dle_addr+sizeof(struct dle)*DLE_ENTRIES);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* the end of the dle q points to the entry after the last
DLE that can be used. */
/* write the upper 20 bits of the start address to rx list address register */
atm: [iphase] 64-bit cleanup This fixes the most obvious 64-bit problems, but it is still very very broken in other aspects. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-18 07:21:18 +08:00
/* We know this is 32bit bus addressed so the following is safe */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
writel(iadev->rx_dle_dma & 0xfffff000,
iadev->dma + IPHASE5575_RX_LIST_ADDR);
atm: fix direct casts of pointers to u32 in the InterPhase driver Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:33:05 +08:00
IF_INIT(printk("Tx Dle list addr: 0x%p value: 0x%0x\n",
iadev->dma+IPHASE5575_TX_LIST_ADDR,
atm/iphase : removal of PCI space dereferences. Mostly PHY access and a few (ugly) debug statements for DMA control. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30 08:37:43 +08:00
readl(iadev->dma + IPHASE5575_TX_LIST_ADDR));
atm: fix direct casts of pointers to u32 in the InterPhase driver Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:33:05 +08:00
printk("Rx Dle list addr: 0x%p value: 0x%0x\n",
iadev->dma+IPHASE5575_RX_LIST_ADDR,
atm/iphase : removal of PCI space dereferences. Mostly PHY access and a few (ugly) debug statements for DMA control. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30 08:37:43 +08:00
readl(iadev->dma + IPHASE5575_RX_LIST_ADDR));)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
writew(0xffff, iadev->reass_reg+REASS_MASK_REG);
writew(0, iadev->reass_reg+MODE_REG);
writew(RESET_REASS, iadev->reass_reg+REASS_COMMAND_REG);
/* Receive side control memory map
-------------------------------
Buffer descr 0x0000 (736 - 23K)
VP Table 0x5c00 (256 - 512)
Except q 0x5e00 (128 - 512)
Free buffer q 0x6000 (1K - 2K)
Packet comp q 0x6800 (1K - 2K)
Reass Table 0x7000 (1K - 2K)
VC Table 0x7800 (1K - 2K)
ABR VC Table 0x8000 (1K - 32K)
*/
/* Base address for Buffer Descriptor Table */
writew(RX_DESC_BASE >> 16, iadev->reass_reg+REASS_DESC_BASE);
/* Set the buffer size register */
writew(iadev->rx_buf_sz, iadev->reass_reg+BUF_SIZE);
/* Initialize each entry in the Buffer Descriptor Table */
iadev->RX_DESC_BASE_ADDR = iadev->reass_ram+RX_DESC_BASE*iadev->memSize;
buf_desc_ptr = iadev->RX_DESC_BASE_ADDR;
memset_io(buf_desc_ptr, 0, sizeof(*buf_desc_ptr));
buf_desc_ptr++;
rx_pkt_start = iadev->rx_pkt_ram;
for(i=1; i<=iadev->num_rx_desc; i++)
{
memset_io(buf_desc_ptr, 0, sizeof(*buf_desc_ptr));
buf_desc_ptr->buf_start_hi = rx_pkt_start >> 16;
buf_desc_ptr->buf_start_lo = rx_pkt_start & 0x0000ffff;
buf_desc_ptr++;
rx_pkt_start += iadev->rx_buf_sz;
}
atm: fix direct casts of pointers to u32 in the InterPhase driver Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:33:05 +08:00
IF_INIT(printk("Rx Buffer desc ptr: 0x%p\n", buf_desc_ptr);)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
i = FREE_BUF_DESC_Q*iadev->memSize;
writew(i >> 16, iadev->reass_reg+REASS_QUEUE_BASE);
writew(i, iadev->reass_reg+FREEQ_ST_ADR);
writew(i+iadev->num_rx_desc*sizeof(u_short),
iadev->reass_reg+FREEQ_ED_ADR);
writew(i, iadev->reass_reg+FREEQ_RD_PTR);
writew(i+iadev->num_rx_desc*sizeof(u_short),
iadev->reass_reg+FREEQ_WR_PTR);
/* Fill the FREEQ with all the free descriptors. */
freeq_st_adr = readw(iadev->reass_reg+FREEQ_ST_ADR);
freeq_start = (u_short *)(iadev->reass_ram+freeq_st_adr);
for(i=1; i<=iadev->num_rx_desc; i++)
{
*freeq_start = (u_short)i;
freeq_start++;
}
atm: fix direct casts of pointers to u32 in the InterPhase driver Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:33:05 +08:00
IF_INIT(printk("freeq_start: 0x%p\n", freeq_start);)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Packet Complete Queue */
i = (PKT_COMP_Q * iadev->memSize) & 0xffff;
writew(i, iadev->reass_reg+PCQ_ST_ADR);
writew(i+iadev->num_vc*sizeof(u_short), iadev->reass_reg+PCQ_ED_ADR);
writew(i, iadev->reass_reg+PCQ_RD_PTR);
writew(i, iadev->reass_reg+PCQ_WR_PTR);
/* Exception Queue */
i = (EXCEPTION_Q * iadev->memSize) & 0xffff;
writew(i, iadev->reass_reg+EXCP_Q_ST_ADR);
writew(i + NUM_RX_EXCP * sizeof(RX_ERROR_Q),
iadev->reass_reg+EXCP_Q_ED_ADR);
writew(i, iadev->reass_reg+EXCP_Q_RD_PTR);
writew(i, iadev->reass_reg+EXCP_Q_WR_PTR);
/* Load local copy of FREEQ and PCQ ptrs */
iadev->rfL.fdq_st = readw(iadev->reass_reg+FREEQ_ST_ADR) & 0xffff;
iadev->rfL.fdq_ed = readw(iadev->reass_reg+FREEQ_ED_ADR) & 0xffff ;
iadev->rfL.fdq_rd = readw(iadev->reass_reg+FREEQ_RD_PTR) & 0xffff;
iadev->rfL.fdq_wr = readw(iadev->reass_reg+FREEQ_WR_PTR) & 0xffff;
iadev->rfL.pcq_st = readw(iadev->reass_reg+PCQ_ST_ADR) & 0xffff;
iadev->rfL.pcq_ed = readw(iadev->reass_reg+PCQ_ED_ADR) & 0xffff;
iadev->rfL.pcq_rd = readw(iadev->reass_reg+PCQ_RD_PTR) & 0xffff;
iadev->rfL.pcq_wr = readw(iadev->reass_reg+PCQ_WR_PTR) & 0xffff;
IF_INIT(printk("INIT:pcq_st:0x%x pcq_ed:0x%x pcq_rd:0x%x pcq_wr:0x%x",
iadev->rfL.pcq_st, iadev->rfL.pcq_ed, iadev->rfL.pcq_rd,
iadev->rfL.pcq_wr);)
/* just for check - no VP TBL */
/* VP Table */
/* writew(0x0b80, iadev->reass_reg+VP_LKUP_BASE); */
/* initialize VP Table for invalid VPIs
- I guess we can write all 1s or 0x000f in the entire memory
space or something similar.
*/
/* This seems to work and looks right to me too !!! */
i = REASS_TABLE * iadev->memSize;
writew((i >> 3), iadev->reass_reg+REASS_TABLE_BASE);
/* initialize Reassembly table to I don't know what ???? */
reass_table = (u16 *)(iadev->reass_ram+i);
j = REASS_TABLE_SZ * iadev->memSize;
for(i=0; i < j; i++)
*reass_table++ = NO_AAL5_PKT;
i = 8*1024;
vcsize_sel = 0;
while (i != iadev->num_vc) {
i /= 2;
vcsize_sel++;
}
i = RX_VC_TABLE * iadev->memSize;
writew(((i>>3) & 0xfff8) | vcsize_sel, iadev->reass_reg+VC_LKUP_BASE);
vc_table = (u16 *)(iadev->reass_ram+RX_VC_TABLE*iadev->memSize);
j = RX_VC_TABLE_SZ * iadev->memSize;
for(i = 0; i < j; i++)
{
/* shift the reassembly pointer by 3 + lower 3 bits of
vc_lkup_base register (=3 for 1K VCs) and the last byte
is those low 3 bits.
Shall program this later.
*/
*vc_table = (i << 6) | 15; /* for invalid VCI */
vc_table++;
}
/* ABR VC table */
i = ABR_VC_TABLE * iadev->memSize;
writew(i >> 3, iadev->reass_reg+ABR_LKUP_BASE);
i = ABR_VC_TABLE * iadev->memSize;
abr_vc_table = (struct abr_vc_table *)(iadev->reass_ram+i);
j = REASS_TABLE_SZ * iadev->memSize;
memset ((char*)abr_vc_table, 0, j * sizeof(*abr_vc_table));
for(i = 0; i < j; i++) {
abr_vc_table->rdf = 0x0003;
abr_vc_table->air = 0x5eb1;
abr_vc_table++;
}
/* Initialize other registers */
/* VP Filter Register set for VC Reassembly only */
writew(0xff00, iadev->reass_reg+VP_FILTER);
writew(0, iadev->reass_reg+XTRA_RM_OFFSET);
writew(0x1, iadev->reass_reg+PROTOCOL_ID);
/* Packet Timeout Count related Registers :
Set packet timeout to occur in about 3 seconds
Set Packet Aging Interval count register to overflow in about 4 us
*/
writew(0xF6F8, iadev->reass_reg+PKT_TM_CNT );
atm: [iphase] 64-bit cleanup This fixes the most obvious 64-bit problems, but it is still very very broken in other aspects. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-18 07:21:18 +08:00
i = (j >> 6) & 0xFF;
j += 2 * (j - 1);
i |= ((j << 2) & 0xFF00);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
writew(i, iadev->reass_reg+TMOUT_RANGE);
atm: [iphase] 64-bit cleanup This fixes the most obvious 64-bit problems, but it is still very very broken in other aspects. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-18 07:21:18 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* initiate the desc_tble */
for(i=0; i<iadev->num_tx_desc;i++)
iadev->desc_tbl[i].timestamp = 0;
/* to clear the interrupt status register - read it */
readw(iadev->reass_reg+REASS_INTR_STATUS_REG);
/* Mask Register - clear it */
writew(~(RX_FREEQ_EMPT|RX_PKT_RCVD), iadev->reass_reg+REASS_MASK_REG);
skb_queue_head_init(&iadev->rx_dma_q);
iadev->rx_free_desc_qhead = NULL;
[ATM] drivers/atm/iphase.c: mostly kmalloc + memset conversion to kzalloc drivers/atm/iphase.c | 111508 -> 111431 (-77 bytes) drivers/atm/iphase.o | 254740 -> 254260 (-480 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-11 06:26:18 +08:00
iadev->rx_open = kzalloc(4 * iadev->num_vc, GFP_KERNEL);
if (!iadev->rx_open) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_ERR DEV_LABEL "itf %d couldn't get free page\n",
dev->number);
goto err_free_dle;
}
[ATM] drivers/atm/iphase.c: mostly kmalloc + memset conversion to kzalloc drivers/atm/iphase.c | 111508 -> 111431 (-77 bytes) drivers/atm/iphase.o | 254740 -> 254260 (-480 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-11 06:26:18 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
iadev->rxing = 1;
iadev->rx_pkt_cnt = 0;
/* Mode Register */
writew(R_ONLINE, iadev->reass_reg+MODE_REG);
return 0;
err_free_dle:
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_free_coherent(&iadev->pci->dev, DLE_TOTAL_SIZE, iadev->rx_dle_q.start,
iadev->rx_dle_dma);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err_out:
return -ENOMEM;
}
/*
The memory map suggested in appendix A and the coding for it.
Keeping it around just in case we change our mind later.
Buffer descr 0x0000 (128 - 4K)
UBR sched 0x1000 (1K - 4K)
UBR Wait q 0x2000 (1K - 4K)
Commn queues 0x3000 Packet Ready, Trasmit comp(0x3100)
(128 - 256) each
extended VC 0x4000 (1K - 8K)
ABR sched 0x6000 and ABR wait queue (1K - 2K) each
CBR sched 0x7000 (as needed)
VC table 0x8000 (1K - 32K)
*/
static void tx_intr(struct atm_dev *dev)
{
IADEV *iadev;
unsigned short status;
unsigned long flags;
iadev = INPH_IA_DEV(dev);
status = readl(iadev->seg_reg+SEG_INTR_STATUS_REG);
if (status & TRANSMIT_DONE){
IF_EVENT(printk("Tansmit Done Intr logic run\n");)
spin_lock_irqsave(&iadev->tx_lock, flags);
ia_tx_poll(iadev);
spin_unlock_irqrestore(&iadev->tx_lock, flags);
writew(TRANSMIT_DONE, iadev->seg_reg+SEG_INTR_STATUS_REG);
if (iadev->close_pending)
wake_up(&iadev->close_wait);
}
if (status & TCQ_NOT_EMPTY)
{
IF_EVENT(printk("TCQ_NOT_EMPTY int received\n");)
}
}
static void tx_dle_intr(struct atm_dev *dev)
{
IADEV *iadev;
struct dle *dle, *cur_dle;
struct sk_buff *skb;
struct atm_vcc *vcc;
struct ia_vcc *iavcc;
u_int dle_lp;
unsigned long flags;
iadev = INPH_IA_DEV(dev);
spin_lock_irqsave(&iadev->tx_lock, flags);
dle = iadev->tx_dle_q.read;
dle_lp = readl(iadev->dma+IPHASE5575_TX_LIST_ADDR) &
(sizeof(struct dle)*DLE_ENTRIES - 1);
cur_dle = (struct dle*)(iadev->tx_dle_q.start + (dle_lp >> 4));
while (dle != cur_dle)
{
/* free the DMAed skb */
skb = skb_dequeue(&iadev->tx_dma_q);
if (!skb) break;
/* Revenge of the 2 dle (skb + trailer) used in ia_pkt_tx() */
if (!((dle - iadev->tx_dle_q.start)%(2*sizeof(struct dle)))) {
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_unmap_single(&iadev->pci->dev, dle->sys_pkt_addr, skb->len,
DMA_TO_DEVICE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
vcc = ATM_SKB(skb)->vcc;
if (!vcc) {
printk("tx_dle_intr: vcc is null\n");
spin_unlock_irqrestore(&iadev->tx_lock, flags);
dev_kfree_skb_any(skb);
return;
}
iavcc = INPH_IA_VCC(vcc);
if (!iavcc) {
printk("tx_dle_intr: iavcc is null\n");
spin_unlock_irqrestore(&iadev->tx_lock, flags);
dev_kfree_skb_any(skb);
return;
}
if (vcc->qos.txtp.pcr >= iadev->rate_limit) {
if ((vcc->pop) && (skb->len != 0))
{
vcc->pop(vcc, skb);
}
else {
dev_kfree_skb_any(skb);
}
}
else { /* Hold the rate-limited skb for flow control */
IA_SKB_STATE(skb) |= IA_DLED;
skb_queue_tail(&iavcc->txing_skb, skb);
}
atm: fix direct casts of pointers to u32 in the InterPhase driver Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:33:05 +08:00
IF_EVENT(printk("tx_dle_intr: enque skb = 0x%p \n", skb);)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (++dle == iadev->tx_dle_q.end)
dle = iadev->tx_dle_q.start;
}
iadev->tx_dle_q.read = dle;
spin_unlock_irqrestore(&iadev->tx_lock, flags);
}
static int open_tx(struct atm_vcc *vcc)
{
struct ia_vcc *ia_vcc;
IADEV *iadev;
struct main_vc *vc;
struct ext_vc *evc;
int ret;
IF_EVENT(printk("iadev: open_tx entered vcc->vci = %d\n", vcc->vci);)
if (vcc->qos.txtp.traffic_class == ATM_NONE) return 0;
iadev = INPH_IA_DEV(vcc->dev);
if (iadev->phy_type & FE_25MBIT_PHY) {
if (vcc->qos.txtp.traffic_class == ATM_ABR) {
printk("IA: ABR not support\n");
return -EINVAL;
}
if (vcc->qos.txtp.traffic_class == ATM_CBR) {
printk("IA: CBR not support\n");
return -EINVAL;
}
}
ia_vcc = INPH_IA_VCC(vcc);
memset((caddr_t)ia_vcc, 0, sizeof(*ia_vcc));
if (vcc->qos.txtp.max_sdu >
(iadev->tx_buf_sz - sizeof(struct cpcs_trailer))){
printk("IA: SDU size over (%d) the configured SDU size %d\n",
vcc->qos.txtp.max_sdu,iadev->tx_buf_sz);
vcc->dev_data = NULL;
kfree(ia_vcc);
return -EINVAL;
}
ia_vcc->vc_desc_cnt = 0;
ia_vcc->txing = 1;
/* find pcr */
if (vcc->qos.txtp.max_pcr == ATM_MAX_PCR)
vcc->qos.txtp.pcr = iadev->LineRate;
else if ((vcc->qos.txtp.max_pcr == 0)&&( vcc->qos.txtp.pcr <= 0))
vcc->qos.txtp.pcr = iadev->LineRate;
else if ((vcc->qos.txtp.max_pcr > vcc->qos.txtp.pcr) && (vcc->qos.txtp.max_pcr> 0))
vcc->qos.txtp.pcr = vcc->qos.txtp.max_pcr;
if (vcc->qos.txtp.pcr > iadev->LineRate)
vcc->qos.txtp.pcr = iadev->LineRate;
ia_vcc->pcr = vcc->qos.txtp.pcr;
if (ia_vcc->pcr > (iadev->LineRate / 6) ) ia_vcc->ltimeout = HZ / 10;
else if (ia_vcc->pcr > (iadev->LineRate / 130)) ia_vcc->ltimeout = HZ;
else if (ia_vcc->pcr <= 170) ia_vcc->ltimeout = 16 * HZ;
else ia_vcc->ltimeout = 2700 * HZ / ia_vcc->pcr;
if (ia_vcc->pcr < iadev->rate_limit)
skb_queue_head_init (&ia_vcc->txing_skb);
if (ia_vcc->pcr < iadev->rate_limit) {
struct sock *sk = sk_atm(vcc);
if (vcc->qos.txtp.max_sdu != 0) {
if (ia_vcc->pcr > 60000)
sk->sk_sndbuf = vcc->qos.txtp.max_sdu * 5;
else if (ia_vcc->pcr > 2000)
sk->sk_sndbuf = vcc->qos.txtp.max_sdu * 4;
else
sk->sk_sndbuf = vcc->qos.txtp.max_sdu * 3;
}
else
sk->sk_sndbuf = 24576;
}
vc = (struct main_vc *)iadev->MAIN_VC_TABLE_ADDR;
evc = (struct ext_vc *)iadev->EXT_VC_TABLE_ADDR;
vc += vcc->vci;
evc += vcc->vci;
memset((caddr_t)vc, 0, sizeof(*vc));
memset((caddr_t)evc, 0, sizeof(*evc));
/* store the most significant 4 bits of vci as the last 4 bits
of first part of atm header.
store the last 12 bits of vci as first 12 bits of the second
part of the atm header.
*/
evc->atm_hdr1 = (vcc->vci >> 12) & 0x000f;
evc->atm_hdr2 = (vcc->vci & 0x0fff) << 4;
/* check the following for different traffic classes */
if (vcc->qos.txtp.traffic_class == ATM_UBR)
{
vc->type = UBR;
vc->status = CRC_APPEND;
vc->acr = cellrate_to_float(iadev->LineRate);
if (vcc->qos.txtp.pcr > 0)
vc->acr = cellrate_to_float(vcc->qos.txtp.pcr);
IF_UBR(printk("UBR: txtp.pcr = 0x%x f_rate = 0x%x\n",
vcc->qos.txtp.max_pcr,vc->acr);)
}
else if (vcc->qos.txtp.traffic_class == ATM_ABR)
{ srv_cls_param_t srv_p;
IF_ABR(printk("Tx ABR VCC\n");)
init_abr_vc(iadev, &srv_p);
if (vcc->qos.txtp.pcr > 0)
srv_p.pcr = vcc->qos.txtp.pcr;
if (vcc->qos.txtp.min_pcr > 0) {
int tmpsum = iadev->sum_mcr+iadev->sum_cbr+vcc->qos.txtp.min_pcr;
if (tmpsum > iadev->LineRate)
return -EBUSY;
srv_p.mcr = vcc->qos.txtp.min_pcr;
iadev->sum_mcr += vcc->qos.txtp.min_pcr;
}
else srv_p.mcr = 0;
if (vcc->qos.txtp.icr)
srv_p.icr = vcc->qos.txtp.icr;
if (vcc->qos.txtp.tbe)
srv_p.tbe = vcc->qos.txtp.tbe;
if (vcc->qos.txtp.frtt)
srv_p.frtt = vcc->qos.txtp.frtt;
if (vcc->qos.txtp.rif)
srv_p.rif = vcc->qos.txtp.rif;
if (vcc->qos.txtp.rdf)
srv_p.rdf = vcc->qos.txtp.rdf;
if (vcc->qos.txtp.nrm_pres)
srv_p.nrm = vcc->qos.txtp.nrm;
if (vcc->qos.txtp.trm_pres)
srv_p.trm = vcc->qos.txtp.trm;
if (vcc->qos.txtp.adtf_pres)
srv_p.adtf = vcc->qos.txtp.adtf;
if (vcc->qos.txtp.cdf_pres)
srv_p.cdf = vcc->qos.txtp.cdf;
if (srv_p.icr > srv_p.pcr)
srv_p.icr = srv_p.pcr;
IF_ABR(printk("ABR:vcc->qos.txtp.max_pcr = %d mcr = %d\n",
srv_p.pcr, srv_p.mcr);)
ia_open_abr_vc(iadev, &srv_p, vcc, 1);
} else if (vcc->qos.txtp.traffic_class == ATM_CBR) {
if (iadev->phy_type & FE_25MBIT_PHY) {
printk("IA: CBR not support\n");
return -EINVAL;
}
if (vcc->qos.txtp.max_pcr > iadev->LineRate) {
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 09:57:33 +08:00
IF_CBR(printk("PCR is not available\n");)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -1;
}
vc->type = CBR;
vc->status = CRC_APPEND;
if ((ret = ia_cbr_setup (iadev, vcc)) < 0) {
return ret;
}
}
else
printk("iadev: Non UBR, ABR and CBR traffic not supportedn");
iadev->testTable[vcc->vci]->vc_status |= VC_ACTIVE;
IF_EVENT(printk("ia open_tx returning \n");)
return 0;
}
static int tx_init(struct atm_dev *dev)
{
IADEV *iadev;
struct tx_buf_desc *buf_desc_ptr;
unsigned int tx_pkt_start;
void *dle_addr;
int i;
u_short tcq_st_adr;
u_short *tcq_start;
u_short prq_st_adr;
u_short *prq_start;
struct main_vc *vc;
struct ext_vc *evc;
u_short tmp16;
u32 vcsize_sel;
iadev = INPH_IA_DEV(dev);
spin_lock_init(&iadev->tx_lock);
IF_INIT(printk("Tx MASK REG: 0x%0x\n",
readw(iadev->seg_reg+SEG_MASK_REG));)
/* Allocate 4k (boundary aligned) bytes */
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dle_addr = dma_alloc_coherent(&iadev->pci->dev, DLE_TOTAL_SIZE,
&iadev->tx_dle_dma, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!dle_addr) {
printk(KERN_ERR DEV_LABEL "can't allocate DLEs\n");
goto err_out;
}
iadev->tx_dle_q.start = (struct dle*)dle_addr;
iadev->tx_dle_q.read = iadev->tx_dle_q.start;
iadev->tx_dle_q.write = iadev->tx_dle_q.start;
atm: [iphase] 64-bit cleanup This fixes the most obvious 64-bit problems, but it is still very very broken in other aspects. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-18 07:21:18 +08:00
iadev->tx_dle_q.end = (struct dle*)((unsigned long)dle_addr+sizeof(struct dle)*DLE_ENTRIES);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* write the upper 20 bits of the start address to tx list address register */
writel(iadev->tx_dle_dma & 0xfffff000,
iadev->dma + IPHASE5575_TX_LIST_ADDR);
writew(0xffff, iadev->seg_reg+SEG_MASK_REG);
writew(0, iadev->seg_reg+MODE_REG_0);
writew(RESET_SEG, iadev->seg_reg+SEG_COMMAND_REG);
iadev->MAIN_VC_TABLE_ADDR = iadev->seg_ram+MAIN_VC_TABLE*iadev->memSize;
iadev->EXT_VC_TABLE_ADDR = iadev->seg_ram+EXT_VC_TABLE*iadev->memSize;
iadev->ABR_SCHED_TABLE_ADDR=iadev->seg_ram+ABR_SCHED_TABLE*iadev->memSize;
/*
Transmit side control memory map
--------------------------------
Buffer descr 0x0000 (128 - 4K)
Commn queues 0x1000 Transmit comp, Packet ready(0x1400)
(512 - 1K) each
TCQ - 4K, PRQ - 5K
CBR Table 0x1800 (as needed) - 6K
UBR Table 0x3000 (1K - 4K) - 12K
UBR Wait queue 0x4000 (1K - 4K) - 16K
ABR sched 0x5000 and ABR wait queue (1K - 2K) each
ABR Tbl - 20K, ABR Wq - 22K
extended VC 0x6000 (1K - 8K) - 24K
VC Table 0x8000 (1K - 32K) - 32K
Between 0x2000 (8K) and 0x3000 (12K) there is 4K space left for VBR Tbl
and Wait q, which can be allotted later.
*/
/* Buffer Descriptor Table Base address */
writew(TX_DESC_BASE, iadev->seg_reg+SEG_DESC_BASE);
/* initialize each entry in the buffer descriptor table */
buf_desc_ptr =(struct tx_buf_desc *)(iadev->seg_ram+TX_DESC_BASE);
memset((caddr_t)buf_desc_ptr, 0, sizeof(*buf_desc_ptr));
buf_desc_ptr++;
tx_pkt_start = TX_PACKET_RAM;
for(i=1; i<=iadev->num_tx_desc; i++)
{
memset((caddr_t)buf_desc_ptr, 0, sizeof(*buf_desc_ptr));
buf_desc_ptr->desc_mode = AAL5;
buf_desc_ptr->buf_start_hi = tx_pkt_start >> 16;
buf_desc_ptr->buf_start_lo = tx_pkt_start & 0x0000ffff;
buf_desc_ptr++;
tx_pkt_start += iadev->tx_buf_sz;
}
iadev->tx_buf = kmalloc(iadev->num_tx_desc*sizeof(struct cpcs_trailer_desc), GFP_KERNEL);
if (!iadev->tx_buf) {
printk(KERN_ERR DEV_LABEL " couldn't get mem\n");
goto err_free_dle;
}
for (i= 0; i< iadev->num_tx_desc; i++)
{
struct cpcs_trailer *cpcs;
cpcs = kmalloc(sizeof(*cpcs), GFP_KERNEL|GFP_DMA);
if(!cpcs) {
printk(KERN_ERR DEV_LABEL " couldn't get freepage\n");
goto err_free_tx_bufs;
}
iadev->tx_buf[i].cpcs = cpcs;
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
iadev->tx_buf[i].dma_addr = dma_map_single(&iadev->pci->dev,
cpcs,
sizeof(*cpcs),
DMA_TO_DEVICE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
iadev->desc_tbl = kmalloc(iadev->num_tx_desc *
sizeof(struct desc_tbl_t), GFP_KERNEL);
if (!iadev->desc_tbl) {
printk(KERN_ERR DEV_LABEL " couldn't get mem\n");
goto err_free_all_tx_bufs;
}
/* Communication Queues base address */
i = TX_COMP_Q * iadev->memSize;
writew(i >> 16, iadev->seg_reg+SEG_QUEUE_BASE);
/* Transmit Complete Queue */
writew(i, iadev->seg_reg+TCQ_ST_ADR);
writew(i, iadev->seg_reg+TCQ_RD_PTR);
writew(i+iadev->num_tx_desc*sizeof(u_short),iadev->seg_reg+TCQ_WR_PTR);
iadev->host_tcq_wr = i + iadev->num_tx_desc*sizeof(u_short);
writew(i+2 * iadev->num_tx_desc * sizeof(u_short),
iadev->seg_reg+TCQ_ED_ADR);
/* Fill the TCQ with all the free descriptors. */
tcq_st_adr = readw(iadev->seg_reg+TCQ_ST_ADR);
tcq_start = (u_short *)(iadev->seg_ram+tcq_st_adr);
for(i=1; i<=iadev->num_tx_desc; i++)
{
*tcq_start = (u_short)i;
tcq_start++;
}
/* Packet Ready Queue */
i = PKT_RDY_Q * iadev->memSize;
writew(i, iadev->seg_reg+PRQ_ST_ADR);
writew(i+2 * iadev->num_tx_desc * sizeof(u_short),
iadev->seg_reg+PRQ_ED_ADR);
writew(i, iadev->seg_reg+PRQ_RD_PTR);
writew(i, iadev->seg_reg+PRQ_WR_PTR);
/* Load local copy of PRQ and TCQ ptrs */
iadev->ffL.prq_st = readw(iadev->seg_reg+PRQ_ST_ADR) & 0xffff;
iadev->ffL.prq_ed = readw(iadev->seg_reg+PRQ_ED_ADR) & 0xffff;
iadev->ffL.prq_wr = readw(iadev->seg_reg+PRQ_WR_PTR) & 0xffff;
iadev->ffL.tcq_st = readw(iadev->seg_reg+TCQ_ST_ADR) & 0xffff;
iadev->ffL.tcq_ed = readw(iadev->seg_reg+TCQ_ED_ADR) & 0xffff;
iadev->ffL.tcq_rd = readw(iadev->seg_reg+TCQ_RD_PTR) & 0xffff;
/* Just for safety initializing the queue to have desc 1 always */
/* Fill the PRQ with all the free descriptors. */
prq_st_adr = readw(iadev->seg_reg+PRQ_ST_ADR);
prq_start = (u_short *)(iadev->seg_ram+prq_st_adr);
for(i=1; i<=iadev->num_tx_desc; i++)
{
*prq_start = (u_short)0; /* desc 1 in all entries */
prq_start++;
}
/* CBR Table */
IF_INIT(printk("Start CBR Init\n");)
#if 1 /* for 1K VC board, CBR_PTR_BASE is 0 */
writew(0,iadev->seg_reg+CBR_PTR_BASE);
#else /* Charlie's logic is wrong ? */
tmp16 = (iadev->seg_ram+CBR_SCHED_TABLE*iadev->memSize)>>17;
IF_INIT(printk("cbr_ptr_base = 0x%x ", tmp16);)
writew(tmp16,iadev->seg_reg+CBR_PTR_BASE);
#endif
IF_INIT(printk("value in register = 0x%x\n",
readw(iadev->seg_reg+CBR_PTR_BASE));)
tmp16 = (CBR_SCHED_TABLE*iadev->memSize) >> 1;
writew(tmp16, iadev->seg_reg+CBR_TAB_BEG);
IF_INIT(printk("cbr_tab_beg = 0x%x in reg = 0x%x \n", tmp16,
readw(iadev->seg_reg+CBR_TAB_BEG));)
writew(tmp16, iadev->seg_reg+CBR_TAB_END+1); // CBR_PTR;
tmp16 = (CBR_SCHED_TABLE*iadev->memSize + iadev->num_vc*6 - 2) >> 1;
writew(tmp16, iadev->seg_reg+CBR_TAB_END);
atm: fix direct casts of pointers to u32 in the InterPhase driver Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:33:05 +08:00
IF_INIT(printk("iadev->seg_reg = 0x%p CBR_PTR_BASE = 0x%x\n",
iadev->seg_reg, readw(iadev->seg_reg+CBR_PTR_BASE));)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
IF_INIT(printk("CBR_TAB_BEG = 0x%x, CBR_TAB_END = 0x%x, CBR_PTR = 0x%x\n",
readw(iadev->seg_reg+CBR_TAB_BEG), readw(iadev->seg_reg+CBR_TAB_END),
readw(iadev->seg_reg+CBR_TAB_END+1));)
/* Initialize the CBR Schedualing Table */
memset_io(iadev->seg_ram+CBR_SCHED_TABLE*iadev->memSize,
0, iadev->num_vc*6);
iadev->CbrRemEntries = iadev->CbrTotEntries = iadev->num_vc*3;
iadev->CbrEntryPt = 0;
iadev->Granularity = MAX_ATM_155 / iadev->CbrTotEntries;
iadev->NumEnabledCBR = 0;
/* UBR scheduling Table and wait queue */
/* initialize all bytes of UBR scheduler table and wait queue to 0
- SCHEDSZ is 1K (# of entries).
- UBR Table size is 4K
- UBR wait queue is 4K
since the table and wait queues are contiguous, all the bytes
tree-wide: fix comment/printk typos "gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-02 03:38:34 +08:00
can be initialized by one memeset.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
vcsize_sel = 0;
i = 8*1024;
while (i != iadev->num_vc) {
i /= 2;
vcsize_sel++;
}
i = MAIN_VC_TABLE * iadev->memSize;
writew(vcsize_sel | ((i >> 8) & 0xfff8),iadev->seg_reg+VCT_BASE);
i = EXT_VC_TABLE * iadev->memSize;
writew((i >> 8) & 0xfffe, iadev->seg_reg+VCTE_BASE);
i = UBR_SCHED_TABLE * iadev->memSize;
writew((i & 0xffff) >> 11, iadev->seg_reg+UBR_SBPTR_BASE);
i = UBR_WAIT_Q * iadev->memSize;
writew((i >> 7) & 0xffff, iadev->seg_reg+UBRWQ_BASE);
memset((caddr_t)(iadev->seg_ram+UBR_SCHED_TABLE*iadev->memSize),
0, iadev->num_vc*8);
/* ABR scheduling Table(0x5000-0x57ff) and wait queue(0x5800-0x5fff)*/
/* initialize all bytes of ABR scheduler table and wait queue to 0
- SCHEDSZ is 1K (# of entries).
- ABR Table size is 2K
- ABR wait queue is 2K
since the table and wait queues are contiguous, all the bytes
tree-wide: fix comment/printk typos "gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-02 03:38:34 +08:00
can be initialized by one memeset.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
i = ABR_SCHED_TABLE * iadev->memSize;
writew((i >> 11) & 0xffff, iadev->seg_reg+ABR_SBPTR_BASE);
i = ABR_WAIT_Q * iadev->memSize;
writew((i >> 7) & 0xffff, iadev->seg_reg+ABRWQ_BASE);
i = ABR_SCHED_TABLE*iadev->memSize;
memset((caddr_t)(iadev->seg_ram+i), 0, iadev->num_vc*4);
vc = (struct main_vc *)iadev->MAIN_VC_TABLE_ADDR;
evc = (struct ext_vc *)iadev->EXT_VC_TABLE_ADDR;
iadev->testTable = kmalloc(sizeof(long)*iadev->num_vc, GFP_KERNEL);
if (!iadev->testTable) {
printk("Get freepage failed\n");
goto err_free_desc_tbl;
}
for(i=0; i<iadev->num_vc; i++)
{
memset((caddr_t)vc, 0, sizeof(*vc));
memset((caddr_t)evc, 0, sizeof(*evc));
iadev->testTable[i] = kmalloc(sizeof(struct testTable_t),
GFP_KERNEL);
if (!iadev->testTable[i])
goto err_free_test_tables;
iadev->testTable[i]->lastTime = 0;
iadev->testTable[i]->fract = 0;
iadev->testTable[i]->vc_status = VC_UBR;
vc++;
evc++;
}
/* Other Initialization */
/* Max Rate Register */
if (iadev->phy_type & FE_25MBIT_PHY) {
writew(RATE25, iadev->seg_reg+MAXRATE);
writew((UBR_EN | (0x23 << 2)), iadev->seg_reg+STPARMS);
}
else {
writew(cellrate_to_float(iadev->LineRate),iadev->seg_reg+MAXRATE);
writew((UBR_EN | ABR_EN | (0x23 << 2)), iadev->seg_reg+STPARMS);
}
/* Set Idle Header Reigisters to be sure */
writew(0, iadev->seg_reg+IDLEHEADHI);
writew(0, iadev->seg_reg+IDLEHEADLO);
/* Program ABR UBR Priority Register as PRI_ABR_UBR_EQUAL */
writew(0xaa00, iadev->seg_reg+ABRUBR_ARB);
iadev->close_pending = 0;
init_waitqueue_head(&iadev->close_wait);
init_waitqueue_head(&iadev->timeout_wait);
skb_queue_head_init(&iadev->tx_dma_q);
ia_init_rtn_q(&iadev->tx_return_q);
/* RM Cell Protocol ID and Message Type */
writew(RM_TYPE_4_0, iadev->seg_reg+RM_TYPE);
skb_queue_head_init (&iadev->tx_backlog);
/* Mode Register 1 */
writew(MODE_REG_1_VAL, iadev->seg_reg+MODE_REG_1);
/* Mode Register 0 */
writew(T_ONLINE, iadev->seg_reg+MODE_REG_0);
/* Interrupt Status Register - read to clear */
readw(iadev->seg_reg+SEG_INTR_STATUS_REG);
/* Interrupt Mask Reg- don't mask TCQ_NOT_EMPTY interrupt generation */
writew(~(TRANSMIT_DONE | TCQ_NOT_EMPTY), iadev->seg_reg+SEG_MASK_REG);
writew(TRANSMIT_DONE, iadev->seg_reg+SEG_INTR_STATUS_REG);
iadev->tx_pkt_cnt = 0;
iadev->rate_limit = iadev->LineRate / 3;
return 0;
err_free_test_tables:
while (--i >= 0)
kfree(iadev->testTable[i]);
kfree(iadev->testTable);
err_free_desc_tbl:
kfree(iadev->desc_tbl);
err_free_all_tx_bufs:
i = iadev->num_tx_desc;
err_free_tx_bufs:
while (--i >= 0) {
struct cpcs_trailer_desc *desc = iadev->tx_buf + i;
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_unmap_single(&iadev->pci->dev, desc->dma_addr,
sizeof(*desc->cpcs), DMA_TO_DEVICE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
kfree(desc->cpcs);
}
kfree(iadev->tx_buf);
err_free_dle:
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_free_coherent(&iadev->pci->dev, DLE_TOTAL_SIZE, iadev->tx_dle_q.start,
iadev->tx_dle_dma);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err_out:
return -ENOMEM;
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t ia_int(int irq, void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct atm_dev *dev;
IADEV *iadev;
unsigned int status;
int handled = 0;
dev = dev_id;
iadev = INPH_IA_DEV(dev);
while( (status = readl(iadev->reg+IPHASE5575_BUS_STATUS_REG) & 0x7f))
{
handled = 1;
IF_EVENT(printk("ia_int: status = 0x%x\n", status);)
if (status & STAT_REASSINT)
{
/* do something */
IF_EVENT(printk("REASSINT Bus status reg: %08x\n", status);)
rx_intr(dev);
}
if (status & STAT_DLERINT)
{
/* Clear this bit by writing a 1 to it. */
atm/iphase : removal of PCI space dereferences. Mostly PHY access and a few (ugly) debug statements for DMA control. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30 08:37:43 +08:00
writel(STAT_DLERINT, iadev->reg + IPHASE5575_BUS_STATUS_REG);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
rx_dle_intr(dev);
}
if (status & STAT_SEGINT)
{
/* do something */
IF_EVENT(printk("IA: tx_intr \n");)
tx_intr(dev);
}
if (status & STAT_DLETINT)
{
atm/iphase : removal of PCI space dereferences. Mostly PHY access and a few (ugly) debug statements for DMA control. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30 08:37:43 +08:00
writel(STAT_DLETINT, iadev->reg + IPHASE5575_BUS_STATUS_REG);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tx_dle_intr(dev);
}
if (status & (STAT_FEINT | STAT_ERRINT | STAT_MARKINT))
{
if (status & STAT_FEINT)
atm/iphase : removal of PCI space dereferences. Mostly PHY access and a few (ugly) debug statements for DMA control. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30 08:37:43 +08:00
ia_frontend_intr(iadev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
return IRQ_RETVAL(handled);
}
/*----------------------------- entries --------------------------------*/
static int get_esi(struct atm_dev *dev)
{
IADEV *iadev;
int i;
u32 mac1;
u16 mac2;
iadev = INPH_IA_DEV(dev);
mac1 = cpu_to_be32(le32_to_cpu(readl(
iadev->reg+IPHASE5575_MAC1)));
mac2 = cpu_to_be16(le16_to_cpu(readl(iadev->reg+IPHASE5575_MAC2)));
IF_INIT(printk("ESI: 0x%08x%04x\n", mac1, mac2);)
for (i=0; i<MAC1_LEN; i++)
dev->esi[i] = mac1 >>(8*(MAC1_LEN-1-i));
for (i=0; i<MAC2_LEN; i++)
dev->esi[i+MAC1_LEN] = mac2 >>(8*(MAC2_LEN - 1 -i));
return 0;
}
static int reset_sar(struct atm_dev *dev)
{
IADEV *iadev;
int i, error = 1;
unsigned int pci[64];
iadev = INPH_IA_DEV(dev);
for(i=0; i<64; i++)
if ((error = pci_read_config_dword(iadev->pci,
i*4, &pci[i])) != PCIBIOS_SUCCESSFUL)
return error;
writel(0, iadev->reg+IPHASE5575_EXT_RESET);
for(i=0; i<64; i++)
if ((error = pci_write_config_dword(iadev->pci,
i*4, pci[i])) != PCIBIOS_SUCCESSFUL)
return error;
udelay(5);
return 0;
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static int ia_init(struct atm_dev *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
IADEV *iadev;
unsigned long real_base;
void __iomem *base;
unsigned short command;
int error, i;
/* The device has been identified and registered. Now we read
necessary configuration info like memory base address,
interrupt number etc */
IF_INIT(printk(">ia_init\n");)
dev->ci_range.vpi_bits = 0;
dev->ci_range.vci_bits = NR_VCI_LD;
iadev = INPH_IA_DEV(dev);
real_base = pci_resource_start (iadev->pci, 0);
iadev->irq = iadev->pci->irq;
PCI: Change all drivers to use pci_device->revision Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 06:46:36 +08:00
error = pci_read_config_word(iadev->pci, PCI_COMMAND, &command);
if (error) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%x\n",
dev->number,error);
return -EINVAL;
}
IF_INIT(printk(DEV_LABEL "(itf %d): rev.%d,realbase=0x%lx,irq=%d\n",
PCI: Change all drivers to use pci_device->revision Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 06:46:36 +08:00
dev->number, iadev->pci->revision, real_base, iadev->irq);)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* find mapping size of board */
iadev->pci_map_size = pci_resource_len(iadev->pci, 0);
if (iadev->pci_map_size == 0x100000){
iadev->num_vc = 4096;
dev->ci_range.vci_bits = NR_VCI_4K_LD;
iadev->memSize = 4;
}
else if (iadev->pci_map_size == 0x40000) {
iadev->num_vc = 1024;
iadev->memSize = 1;
}
else {
printk("Unknown pci_map_size = 0x%x\n", iadev->pci_map_size);
return -EINVAL;
}
IF_INIT(printk (DEV_LABEL "map size: %i\n", iadev->pci_map_size);)
/* enable bus mastering */
pci_set_master(iadev->pci);
/*
* Delay at least 1us before doing any mem accesses (how 'bout 10?)
*/
udelay(10);
/* mapping the physical address to a virtual address in address space */
base = ioremap(real_base,iadev->pci_map_size); /* ioremap is not resolved ??? */
if (!base)
{
printk(DEV_LABEL " (itf %d): can't set up page mapping\n",
dev->number);
drivers/atm/iphase.c: fix error return code Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-05 07:52:36 +08:00
return -ENOMEM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
IF_INIT(printk(DEV_LABEL " (itf %d): rev.%d,base=%p,irq=%d\n",
PCI: Change all drivers to use pci_device->revision Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 06:46:36 +08:00
dev->number, iadev->pci->revision, base, iadev->irq);)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* filling the iphase dev structure */
iadev->mem = iadev->pci_map_size /2;
iadev->real_base = real_base;
iadev->base = base;
/* Bus Interface Control Registers */
iadev->reg = base + REG_BASE;
/* Segmentation Control Registers */
iadev->seg_reg = base + SEG_BASE;
/* Reassembly Control Registers */
iadev->reass_reg = base + REASS_BASE;
/* Front end/ DMA control registers */
iadev->phy = base + PHY_BASE;
iadev->dma = base + PHY_BASE;
/* RAM - Segmentation RAm and Reassembly RAM */
iadev->ram = base + ACTUAL_RAM_BASE;
iadev->seg_ram = base + ACTUAL_SEG_RAM_BASE;
iadev->reass_ram = base + ACTUAL_REASS_RAM_BASE;
/* lets print out the above */
IF_INIT(printk("Base addrs: %p %p %p \n %p %p %p %p\n",
iadev->reg,iadev->seg_reg,iadev->reass_reg,
iadev->phy, iadev->ram, iadev->seg_ram,
iadev->reass_ram);)
/* lets try reading the MAC address */
error = get_esi(dev);
if (error) {
iounmap(iadev->base);
return error;
}
printk("IA: ");
for (i=0; i < ESI_LEN; i++)
printk("%s%02X",i ? "-" : "",dev->esi[i]);
printk("\n");
/* reset SAR */
if (reset_sar(dev)) {
iounmap(iadev->base);
printk("IA: reset SAR fail, please try again\n");
return 1;
}
return 0;
}
static void ia_update_stats(IADEV *iadev) {
if (!iadev->carrier_detect)
return;
iadev->rx_cell_cnt += readw(iadev->reass_reg+CELL_CTR0)&0xffff;
iadev->rx_cell_cnt += (readw(iadev->reass_reg+CELL_CTR1) & 0xffff) << 16;
iadev->drop_rxpkt += readw(iadev->reass_reg + DRP_PKT_CNTR ) & 0xffff;
iadev->drop_rxcell += readw(iadev->reass_reg + ERR_CNTR) & 0xffff;
iadev->tx_cell_cnt += readw(iadev->seg_reg + CELL_CTR_LO_AUTO)&0xffff;
iadev->tx_cell_cnt += (readw(iadev->seg_reg+CELL_CTR_HIGH_AUTO)&0xffff)<<16;
return;
}
static void ia_led_timer(unsigned long arg) {
unsigned long flags;
static u_char blinking[8] = {0, 0, 0, 0, 0, 0, 0, 0};
u_char i;
static u32 ctrl_reg;
for (i = 0; i < iadev_count; i++) {
if (ia_dev[i]) {
ctrl_reg = readl(ia_dev[i]->reg+IPHASE5575_BUS_CONTROL_REG);
if (blinking[i] == 0) {
blinking[i]++;
ctrl_reg &= (~CTRL_LED);
writel(ctrl_reg, ia_dev[i]->reg+IPHASE5575_BUS_CONTROL_REG);
ia_update_stats(ia_dev[i]);
}
else {
blinking[i] = 0;
ctrl_reg |= CTRL_LED;
writel(ctrl_reg, ia_dev[i]->reg+IPHASE5575_BUS_CONTROL_REG);
spin_lock_irqsave(&ia_dev[i]->tx_lock, flags);
if (ia_dev[i]->close_pending)
wake_up(&ia_dev[i]->close_wait);
ia_tx_poll(ia_dev[i]);
spin_unlock_irqrestore(&ia_dev[i]->tx_lock, flags);
}
}
}
mod_timer(&ia_timer, jiffies + HZ / 4);
return;
}
static void ia_phy_put(struct atm_dev *dev, unsigned char value,
unsigned long addr)
{
writel(value, INPH_IA_DEV(dev)->phy+addr);
}
static unsigned char ia_phy_get(struct atm_dev *dev, unsigned long addr)
{
return readl(INPH_IA_DEV(dev)->phy+addr);
}
static void ia_free_tx(IADEV *iadev)
{
int i;
kfree(iadev->desc_tbl);
for (i = 0; i < iadev->num_vc; i++)
kfree(iadev->testTable[i]);
kfree(iadev->testTable);
for (i = 0; i < iadev->num_tx_desc; i++) {
struct cpcs_trailer_desc *desc = iadev->tx_buf + i;
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_unmap_single(&iadev->pci->dev, desc->dma_addr,
sizeof(*desc->cpcs), DMA_TO_DEVICE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
kfree(desc->cpcs);
}
kfree(iadev->tx_buf);
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_free_coherent(&iadev->pci->dev, DLE_TOTAL_SIZE, iadev->tx_dle_q.start,
iadev->tx_dle_dma);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static void ia_free_rx(IADEV *iadev)
{
kfree(iadev->rx_open);
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_free_coherent(&iadev->pci->dev, DLE_TOTAL_SIZE, iadev->rx_dle_q.start,
iadev->rx_dle_dma);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static int ia_start(struct atm_dev *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
IADEV *iadev;
int error;
unsigned char phy;
u32 ctrl_reg;
IF_EVENT(printk(">ia_start\n");)
iadev = INPH_IA_DEV(dev);
[PATCH] irq-flags: misc drivers: Use the new IRQF_ constants Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 10:29:38 +08:00
if (request_irq(iadev->irq, &ia_int, IRQF_SHARED, DEV_LABEL, dev)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_ERR DEV_LABEL "(itf %d): IRQ%d is already in use\n",
dev->number, iadev->irq);
error = -EAGAIN;
goto err_out;
}
/* @@@ should release IRQ on error */
/* enabling memory + master */
if ((error = pci_write_config_word(iadev->pci,
PCI_COMMAND,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER )))
{
printk(KERN_ERR DEV_LABEL "(itf %d): can't enable memory+"
"master (0x%x)\n",dev->number, error);
error = -EIO;
goto err_free_irq;
}
udelay(10);
/* Maybe we should reset the front end, initialize Bus Interface Control
Registers and see. */
IF_INIT(printk("Bus ctrl reg: %08x\n",
readl(iadev->reg+IPHASE5575_BUS_CONTROL_REG));)
ctrl_reg = readl(iadev->reg+IPHASE5575_BUS_CONTROL_REG);
ctrl_reg = (ctrl_reg & (CTRL_LED | CTRL_FE_RST))
| CTRL_B8
| CTRL_B16
| CTRL_B32
| CTRL_B48
| CTRL_B64
| CTRL_B128
| CTRL_ERRMASK
| CTRL_DLETMASK /* shud be removed l8r */
| CTRL_DLERMASK
| CTRL_SEGMASK
| CTRL_REASSMASK
| CTRL_FEMASK
| CTRL_CSPREEMPT;
writel(ctrl_reg, iadev->reg+IPHASE5575_BUS_CONTROL_REG);
IF_INIT(printk("Bus ctrl reg after initializing: %08x\n",
readl(iadev->reg+IPHASE5575_BUS_CONTROL_REG));
printk("Bus status reg after init: %08x\n",
readl(iadev->reg+IPHASE5575_BUS_STATUS_REG));)
ia_hw_type(iadev);
error = tx_init(dev);
if (error)
goto err_free_irq;
error = rx_init(dev);
if (error)
goto err_free_tx;
ctrl_reg = readl(iadev->reg+IPHASE5575_BUS_CONTROL_REG);
writel(ctrl_reg | CTRL_FE_RST, iadev->reg+IPHASE5575_BUS_CONTROL_REG);
IF_INIT(printk("Bus ctrl reg after initializing: %08x\n",
readl(iadev->reg+IPHASE5575_BUS_CONTROL_REG));)
phy = 0; /* resolve compiler complaint */
IF_INIT (
if ((phy=ia_phy_get(dev,0)) == 0x30)
printk("IA: pm5346,rev.%d\n",phy&0x0f);
else
printk("IA: utopia,rev.%0x\n",phy);)
if (iadev->phy_type & FE_25MBIT_PHY)
ia_mb25_init(iadev);
else if (iadev->phy_type & (FE_DS3_PHY | FE_E3_PHY))
ia_suni_pm7345_init(iadev);
else {
error = suni_init(dev);
if (error)
goto err_free_rx;
atm: [iphase] doesn't call phy->start due to a bogus #ifndef This causes the suni driver to oops if you try to use sonetdiag to get the statistics. Also add the corresponding phy->stop call to fix another oops if you try to remove the module. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 08:16:35 +08:00
if (dev->phy->start) {
error = dev->phy->start(dev);
if (error)
goto err_free_rx;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Get iadev->carrier_detect status */
atm/iphase : removal of PCI space dereferences. Mostly PHY access and a few (ugly) debug statements for DMA control. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30 08:37:43 +08:00
ia_frontend_intr(iadev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
return 0;
err_free_rx:
ia_free_rx(iadev);
err_free_tx:
ia_free_tx(iadev);
err_free_irq:
free_irq(iadev->irq, dev);
err_out:
return error;
}
static void ia_close(struct atm_vcc *vcc)
{
DEFINE_WAIT(wait);
u16 *vc_table;
IADEV *iadev;
struct ia_vcc *ia_vcc;
struct sk_buff *skb = NULL;
struct sk_buff_head tmp_tx_backlog, tmp_vcc_backlog;
unsigned long closetime, flags;
iadev = INPH_IA_DEV(vcc->dev);
ia_vcc = INPH_IA_VCC(vcc);
if (!ia_vcc) return;
IF_EVENT(printk("ia_close: ia_vcc->vc_desc_cnt = %d vci = %d\n",
ia_vcc->vc_desc_cnt,vcc->vci);)
clear_bit(ATM_VF_READY,&vcc->flags);
skb_queue_head_init (&tmp_tx_backlog);
skb_queue_head_init (&tmp_vcc_backlog);
if (vcc->qos.txtp.traffic_class != ATM_NONE) {
iadev->close_pending++;
prepare_to_wait(&iadev->timeout_wait, &wait, TASK_UNINTERRUPTIBLE);
atm: use msecs_to_jiffies for conversions API compliance scanning with coccinelle flagged: ./drivers/atm/iphase.c:2621:4-20: WARNING: timeout (50) seems HZ dependent Numeric constants passed to schedule_timeout() make the effective timeout HZ dependent which does not seem intended. Fixed up by converting the constant to jiffies with msecs_to_jiffies() As this driver was introduced in the early 2.3 series it is most likely assuming HZ=100 so the constant 50 is converted to 500ms. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 03:16:28 +08:00
schedule_timeout(msecs_to_jiffies(500));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
finish_wait(&iadev->timeout_wait, &wait);
spin_lock_irqsave(&iadev->tx_lock, flags);
while((skb = skb_dequeue(&iadev->tx_backlog))) {
if (ATM_SKB(skb)->vcc == vcc){
if (vcc->pop) vcc->pop(vcc, skb);
else dev_kfree_skb_any(skb);
}
else
skb_queue_tail(&tmp_tx_backlog, skb);
}
while((skb = skb_dequeue(&tmp_tx_backlog)))
skb_queue_tail(&iadev->tx_backlog, skb);
IF_EVENT(printk("IA TX Done decs_cnt = %d\n", ia_vcc->vc_desc_cnt);)
closetime = 300000 / ia_vcc->pcr;
if (closetime == 0)
closetime = 1;
spin_unlock_irqrestore(&iadev->tx_lock, flags);
wait_event_timeout(iadev->close_wait, (ia_vcc->vc_desc_cnt <= 0), closetime);
spin_lock_irqsave(&iadev->tx_lock, flags);
iadev->close_pending--;
iadev->testTable[vcc->vci]->lastTime = 0;
iadev->testTable[vcc->vci]->fract = 0;
iadev->testTable[vcc->vci]->vc_status = VC_UBR;
if (vcc->qos.txtp.traffic_class == ATM_ABR) {
if (vcc->qos.txtp.min_pcr > 0)
iadev->sum_mcr -= vcc->qos.txtp.min_pcr;
}
if (vcc->qos.txtp.traffic_class == ATM_CBR) {
ia_vcc = INPH_IA_VCC(vcc);
iadev->sum_mcr -= ia_vcc->NumCbrEntry*iadev->Granularity;
ia_cbrVc_close (vcc);
}
spin_unlock_irqrestore(&iadev->tx_lock, flags);
}
if (vcc->qos.rxtp.traffic_class != ATM_NONE) {
// reset reass table
vc_table = (u16 *)(iadev->reass_ram+REASS_TABLE*iadev->memSize);
vc_table += vcc->vci;
*vc_table = NO_AAL5_PKT;
// reset vc table
vc_table = (u16 *)(iadev->reass_ram+RX_VC_TABLE*iadev->memSize);
vc_table += vcc->vci;
*vc_table = (vcc->vci << 6) | 15;
if (vcc->qos.rxtp.traffic_class == ATM_ABR) {
struct abr_vc_table __iomem *abr_vc_table =
(iadev->reass_ram+ABR_VC_TABLE*iadev->memSize);
abr_vc_table += vcc->vci;
abr_vc_table->rdf = 0x0003;
abr_vc_table->air = 0x5eb1;
}
// Drain the packets
rx_dle_intr(vcc->dev);
iadev->rx_open[vcc->vci] = NULL;
}
kfree(INPH_IA_VCC(vcc));
ia_vcc = NULL;
vcc->dev_data = NULL;
clear_bit(ATM_VF_ADDR,&vcc->flags);
return;
}
static int ia_open(struct atm_vcc *vcc)
{
struct ia_vcc *ia_vcc;
int error;
if (!test_bit(ATM_VF_PARTIAL,&vcc->flags))
{
IF_EVENT(printk("ia: not partially allocated resources\n");)
vcc->dev_data = NULL;
}
if (vcc->vci != ATM_VPI_UNSPEC && vcc->vpi != ATM_VCI_UNSPEC)
{
IF_EVENT(printk("iphase open: unspec part\n");)
set_bit(ATM_VF_ADDR,&vcc->flags);
}
if (vcc->qos.aal != ATM_AAL5)
return -EINVAL;
IF_EVENT(printk(DEV_LABEL "(itf %d): open %d.%d\n",
vcc->dev->number, vcc->vpi, vcc->vci);)
/* Device dependent initialization */
ia_vcc = kmalloc(sizeof(*ia_vcc), GFP_KERNEL);
if (!ia_vcc) return -ENOMEM;
vcc->dev_data = ia_vcc;
if ((error = open_rx(vcc)))
{
IF_EVENT(printk("iadev: error in open_rx, closing\n");)
ia_close(vcc);
return error;
}
if ((error = open_tx(vcc)))
{
IF_EVENT(printk("iadev: error in open_tx, closing\n");)
ia_close(vcc);
return error;
}
set_bit(ATM_VF_READY,&vcc->flags);
#if 0
{
static u8 first = 1;
if (first) {
ia_timer.expires = jiffies + 3*HZ;
add_timer(&ia_timer);
first = 0;
}
}
#endif
IF_EVENT(printk("ia open returning\n");)
return 0;
}
static int ia_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flags)
{
IF_EVENT(printk(">ia_change_qos\n");)
return 0;
}
static int ia_ioctl(struct atm_dev *dev, unsigned int cmd, void __user *arg)
{
IA_CMDBUF ia_cmds;
IADEV *iadev;
int i, board;
u16 __user *tmps;
IF_EVENT(printk(">ia_ioctl\n");)
if (cmd != IA_CMD) {
if (!dev->phy->ioctl) return -EINVAL;
return dev->phy->ioctl(dev,cmd,arg);
}
if (copy_from_user(&ia_cmds, arg, sizeof ia_cmds)) return -EFAULT;
board = ia_cmds.status;
if ((board < 0) || (board > iadev_count))
board = 0;
iadev = ia_dev[board];
switch (ia_cmds.cmd) {
case MEMDUMP:
{
switch (ia_cmds.sub_cmd) {
case MEMDUMP_DEV:
if (!capable(CAP_NET_ADMIN)) return -EPERM;
if (copy_to_user(ia_cmds.buf, iadev, sizeof(IADEV)))
return -EFAULT;
ia_cmds.status = 0;
break;
case MEMDUMP_SEGREG:
if (!capable(CAP_NET_ADMIN)) return -EPERM;
tmps = (u16 __user *)ia_cmds.buf;
for(i=0; i<0x80; i+=2, tmps++)
if(put_user((u16)(readl(iadev->seg_reg+i) & 0xffff), tmps)) return -EFAULT;
ia_cmds.status = 0;
ia_cmds.len = 0x80;
break;
case MEMDUMP_REASSREG:
if (!capable(CAP_NET_ADMIN)) return -EPERM;
tmps = (u16 __user *)ia_cmds.buf;
for(i=0; i<0x80; i+=2, tmps++)
if(put_user((u16)(readl(iadev->reass_reg+i) & 0xffff), tmps)) return -EFAULT;
ia_cmds.status = 0;
ia_cmds.len = 0x80;
break;
case MEMDUMP_FFL:
{
ia_regs_t *regs_local;
ffredn_t *ffL;
rfredn_t *rfL;
if (!capable(CAP_NET_ADMIN)) return -EPERM;
regs_local = kmalloc(sizeof(*regs_local), GFP_KERNEL);
if (!regs_local) return -ENOMEM;
ffL = &regs_local->ffredn;
rfL = &regs_local->rfredn;
/* Copy real rfred registers into the local copy */
for (i=0; i<(sizeof (rfredn_t))/4; i++)
((u_int *)rfL)[i] = readl(iadev->reass_reg + i) & 0xffff;
/* Copy real ffred registers into the local copy */
for (i=0; i<(sizeof (ffredn_t))/4; i++)
((u_int *)ffL)[i] = readl(iadev->seg_reg + i) & 0xffff;
if (copy_to_user(ia_cmds.buf, regs_local,sizeof(ia_regs_t))) {
kfree(regs_local);
return -EFAULT;
}
kfree(regs_local);
printk("Board %d registers dumped\n", board);
ia_cmds.status = 0;
}
break;
case READ_REG:
{
if (!capable(CAP_NET_ADMIN)) return -EPERM;
desc_dbg(iadev);
ia_cmds.status = 0;
}
break;
case 0x6:
{
ia_cmds.status = 0;
printk("skb = 0x%lx\n", (long)skb_peek(&iadev->tx_backlog));
printk("rtn_q: 0x%lx\n",(long)ia_deque_rtn_q(&iadev->tx_return_q));
}
break;
case 0x8:
{
struct k_sonet_stats *stats;
stats = &PRIV(_ia_dev[board])->sonet_stats;
printk("section_bip: %d\n", atomic_read(&stats->section_bip));
printk("line_bip : %d\n", atomic_read(&stats->line_bip));
printk("path_bip : %d\n", atomic_read(&stats->path_bip));
printk("line_febe : %d\n", atomic_read(&stats->line_febe));
printk("path_febe : %d\n", atomic_read(&stats->path_febe));
printk("corr_hcs : %d\n", atomic_read(&stats->corr_hcs));
printk("uncorr_hcs : %d\n", atomic_read(&stats->uncorr_hcs));
printk("tx_cells : %d\n", atomic_read(&stats->tx_cells));
printk("rx_cells : %d\n", atomic_read(&stats->rx_cells));
}
ia_cmds.status = 0;
break;
case 0x9:
if (!capable(CAP_NET_ADMIN)) return -EPERM;
for (i = 1; i <= iadev->num_rx_desc; i++)
free_desc(_ia_dev[board], i);
writew( ~(RX_FREEQ_EMPT | RX_EXCP_RCVD),
iadev->reass_reg+REASS_MASK_REG);
iadev->rxing = 1;
ia_cmds.status = 0;
break;
case 0xb:
if (!capable(CAP_NET_ADMIN)) return -EPERM;
atm/iphase : removal of PCI space dereferences. Mostly PHY access and a few (ugly) debug statements for DMA control. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-30 08:37:43 +08:00
ia_frontend_intr(iadev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case 0xa:
if (!capable(CAP_NET_ADMIN)) return -EPERM;
{
ia_cmds.status = 0;
IADebugFlag = ia_cmds.maddr;
printk("New debug option loaded\n");
}
break;
default:
ia_cmds.status = 0;
break;
}
}
break;
default:
break;
}
return 0;
}
static int ia_getsockopt(struct atm_vcc *vcc, int level, int optname,
void __user *optval, int optlen)
{
IF_EVENT(printk(">ia_getsockopt\n");)
return -EINVAL;
}
static int ia_setsockopt(struct atm_vcc *vcc, int level, int optname,
net: Make setsockopt() optlen be unsigned. This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01 07:12:20 +08:00
void __user *optval, unsigned int optlen)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
IF_EVENT(printk(">ia_setsockopt\n");)
return -EINVAL;
}
static int ia_pkt_tx (struct atm_vcc *vcc, struct sk_buff *skb) {
IADEV *iadev;
struct dle *wr_ptr;
struct tx_buf_desc __iomem *buf_desc_ptr;
int desc;
int comp_code;
int total_len;
struct cpcs_trailer *trailer;
struct ia_vcc *iavcc;
iadev = INPH_IA_DEV(vcc->dev);
iavcc = INPH_IA_VCC(vcc);
if (!iavcc->txing) {
printk("discard packet on closed VC\n");
if (vcc->pop)
vcc->pop(vcc, skb);
else
dev_kfree_skb_any(skb);
return 0;
}
if (skb->len > iadev->tx_buf_sz - 8) {
printk("Transmit size over tx buffer size\n");
if (vcc->pop)
vcc->pop(vcc, skb);
else
dev_kfree_skb_any(skb);
return 0;
}
atm: [iphase] 64-bit cleanup This fixes the most obvious 64-bit problems, but it is still very very broken in other aspects. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-18 07:21:18 +08:00
if ((unsigned long)skb->data & 3) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk("Misaligned SKB\n");
if (vcc->pop)
vcc->pop(vcc, skb);
else
dev_kfree_skb_any(skb);
return 0;
}
/* Get a descriptor number from our free descriptor queue
We get the descr number from the TCQ now, since I am using
the TCQ as a free buffer queue. Initially TCQ will be
initialized with all the descriptors and is hence, full.
*/
desc = get_desc (iadev, iavcc);
if (desc == 0xffff)
return 1;
comp_code = desc >> 13;
desc &= 0x1fff;
if ((desc == 0) || (desc > iadev->num_tx_desc))
{
IF_ERR(printk(DEV_LABEL "invalid desc for send: %d\n", desc);)
atomic_inc(&vcc->stats->tx);
if (vcc->pop)
vcc->pop(vcc, skb);
else
dev_kfree_skb_any(skb);
return 0; /* return SUCCESS */
}
if (comp_code)
{
IF_ERR(printk(DEV_LABEL "send desc:%d completion code %d error\n",
desc, comp_code);)
}
/* remember the desc and vcc mapping */
iavcc->vc_desc_cnt++;
iadev->desc_tbl[desc-1].iavcc = iavcc;
iadev->desc_tbl[desc-1].txskb = skb;
IA_SKB_STATE(skb) = 0;
iadev->ffL.tcq_rd += 2;
if (iadev->ffL.tcq_rd > iadev->ffL.tcq_ed)
iadev->ffL.tcq_rd = iadev->ffL.tcq_st;
writew(iadev->ffL.tcq_rd, iadev->seg_reg+TCQ_RD_PTR);
/* Put the descriptor number in the packet ready queue
and put the updated write pointer in the DLE field
*/
*(u16*)(iadev->seg_ram+iadev->ffL.prq_wr) = desc;
iadev->ffL.prq_wr += 2;
if (iadev->ffL.prq_wr > iadev->ffL.prq_ed)
iadev->ffL.prq_wr = iadev->ffL.prq_st;
/* Figure out the exact length of the packet and padding required to
make it aligned on a 48 byte boundary. */
total_len = skb->len + sizeof(struct cpcs_trailer);
total_len = ((total_len + 47) / 48) * 48;
IF_TX(printk("ia packet len:%d padding:%d\n", total_len, total_len - skb->len);)
/* Put the packet in a tx buffer */
trailer = iadev->tx_buf[desc-1].cpcs;
atm: fix direct casts of pointers to u32 in the InterPhase driver Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:33:05 +08:00
IF_TX(printk("Sent: skb = 0x%p skb->data: 0x%p len: %d, desc: %d\n",
skb, skb->data, skb->len, desc);)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
trailer->control = 0;
/*big endian*/
trailer->length = ((skb->len & 0xff) << 8) | ((skb->len & 0xff00) >> 8);
trailer->crc32 = 0; /* not needed - dummy bytes */
/* Display the packet */
IF_TXPKT(printk("Sent data: len = %d MsgNum = %d\n",
skb->len, tcnter++);
xdump(skb->data, skb->len, "TX: ");
printk("\n");)
/* Build the buffer descriptor */
buf_desc_ptr = iadev->seg_ram+TX_DESC_BASE;
buf_desc_ptr += desc; /* points to the corresponding entry */
buf_desc_ptr->desc_mode = AAL5 | EOM_EN | APP_CRC32 | CMPL_INT;
/* Huh ? p.115 of users guide describes this as a read-only register */
writew(TRANSMIT_DONE, iadev->seg_reg+SEG_INTR_STATUS_REG);
buf_desc_ptr->vc_index = vcc->vci;
buf_desc_ptr->bytes = total_len;
if (vcc->qos.txtp.traffic_class == ATM_ABR)
clear_lockup (vcc, iadev);
/* Build the DLE structure */
wr_ptr = iadev->tx_dle_q.write;
memset((caddr_t)wr_ptr, 0, sizeof(*wr_ptr));
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
wr_ptr->sys_pkt_addr = dma_map_single(&iadev->pci->dev, skb->data,
skb->len, DMA_TO_DEVICE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
wr_ptr->local_pkt_addr = (buf_desc_ptr->buf_start_hi << 16) |
buf_desc_ptr->buf_start_lo;
generic swap(): iphase: rename swap() to swap_byte_order() In preparation for the introduction of a generic swap() macro. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 10:09:10 +08:00
/* wr_ptr->bytes = swap_byte_order(total_len); didn't seem to affect?? */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
wr_ptr->bytes = skb->len;
/* hw bug - DLEs of 0x2d, 0x2e, 0x2f cause DMA lockup */
if ((wr_ptr->bytes >> 2) == 0xb)
wr_ptr->bytes = 0x30;
wr_ptr->mode = TX_DLE_PSI;
wr_ptr->prq_wr_ptr_data = 0;
/* end is not to be used for the DLE q */
if (++wr_ptr == iadev->tx_dle_q.end)
wr_ptr = iadev->tx_dle_q.start;
/* Build trailer dle */
wr_ptr->sys_pkt_addr = iadev->tx_buf[desc-1].dma_addr;
wr_ptr->local_pkt_addr = ((buf_desc_ptr->buf_start_hi << 16) |
buf_desc_ptr->buf_start_lo) + total_len - sizeof(struct cpcs_trailer);
wr_ptr->bytes = sizeof(struct cpcs_trailer);
wr_ptr->mode = DMA_INT_ENABLE;
wr_ptr->prq_wr_ptr_data = iadev->ffL.prq_wr;
/* end is not to be used for the DLE q */
if (++wr_ptr == iadev->tx_dle_q.end)
wr_ptr = iadev->tx_dle_q.start;
iadev->tx_dle_q.write = wr_ptr;
ATM_DESC(skb) = vcc->vci;
skb_queue_tail(&iadev->tx_dma_q, skb);
atomic_inc(&vcc->stats->tx);
iadev->tx_pkt_cnt++;
/* Increment transaction counter */
writel(2, iadev->dma+IPHASE5575_TX_COUNTER);
#if 0
/* add flow control logic */
if (atomic_read(&vcc->stats->tx) % 20 == 0) {
if (iavcc->vc_desc_cnt > 10) {
vcc->tx_quota = vcc->tx_quota * 3 / 4;
printk("Tx1: vcc->tx_quota = %d \n", (u32)vcc->tx_quota );
iavcc->flow_inc = -1;
iavcc->saved_tx_quota = vcc->tx_quota;
} else if ((iavcc->flow_inc < 0) && (iavcc->vc_desc_cnt < 3)) {
// vcc->tx_quota = 3 * iavcc->saved_tx_quota / 4;
printk("Tx2: vcc->tx_quota = %d \n", (u32)vcc->tx_quota );
iavcc->flow_inc = 0;
}
}
#endif
IF_TX(printk("ia send done\n");)
return 0;
}
static int ia_send(struct atm_vcc *vcc, struct sk_buff *skb)
{
IADEV *iadev;
unsigned long flags;
iadev = INPH_IA_DEV(vcc->dev);
if ((!skb)||(skb->len>(iadev->tx_buf_sz-sizeof(struct cpcs_trailer))))
{
if (!skb)
printk(KERN_CRIT "null skb in ia_send\n");
else dev_kfree_skb_any(skb);
return -EINVAL;
}
spin_lock_irqsave(&iadev->tx_lock, flags);
if (!test_bit(ATM_VF_READY,&vcc->flags)){
dev_kfree_skb_any(skb);
spin_unlock_irqrestore(&iadev->tx_lock, flags);
return -EINVAL;
}
ATM_SKB(skb)->vcc = vcc;
if (skb_peek(&iadev->tx_backlog)) {
skb_queue_tail(&iadev->tx_backlog, skb);
}
else {
if (ia_pkt_tx (vcc, skb)) {
skb_queue_tail(&iadev->tx_backlog, skb);
}
}
spin_unlock_irqrestore(&iadev->tx_lock, flags);
return 0;
}
static int ia_proc_read(struct atm_dev *dev,loff_t *pos,char *page)
{
int left = *pos, n;
char *tmpPtr;
IADEV *iadev = INPH_IA_DEV(dev);
if(!left--) {
if (iadev->phy_type == FE_25MBIT_PHY) {
n = sprintf(page, " Board Type : Iphase5525-1KVC-128K\n");
return n;
}
if (iadev->phy_type == FE_DS3_PHY)
n = sprintf(page, " Board Type : Iphase-ATM-DS3");
else if (iadev->phy_type == FE_E3_PHY)
n = sprintf(page, " Board Type : Iphase-ATM-E3");
else if (iadev->phy_type == FE_UTP_OPTION)
n = sprintf(page, " Board Type : Iphase-ATM-UTP155");
else
n = sprintf(page, " Board Type : Iphase-ATM-OC3");
tmpPtr = page + n;
if (iadev->pci_map_size == 0x40000)
n += sprintf(tmpPtr, "-1KVC-");
else
n += sprintf(tmpPtr, "-4KVC-");
tmpPtr = page + n;
if ((iadev->memType & MEM_SIZE_MASK) == MEM_SIZE_1M)
n += sprintf(tmpPtr, "1M \n");
else if ((iadev->memType & MEM_SIZE_MASK) == MEM_SIZE_512K)
n += sprintf(tmpPtr, "512K\n");
else
n += sprintf(tmpPtr, "128K\n");
return n;
}
if (!left) {
return sprintf(page, " Number of Tx Buffer: %u\n"
" Size of Tx Buffer : %u\n"
" Number of Rx Buffer: %u\n"
" Size of Rx Buffer : %u\n"
" Packets Receiverd : %u\n"
" Packets Transmitted: %u\n"
" Cells Received : %u\n"
" Cells Transmitted : %u\n"
" Board Dropped Cells: %u\n"
" Board Dropped Pkts : %u\n",
iadev->num_tx_desc, iadev->tx_buf_sz,
iadev->num_rx_desc, iadev->rx_buf_sz,
iadev->rx_pkt_cnt, iadev->tx_pkt_cnt,
iadev->rx_cell_cnt, iadev->tx_cell_cnt,
iadev->drop_rxcell, iadev->drop_rxpkt);
}
return 0;
}
static const struct atmdev_ops ops = {
.open = ia_open,
.close = ia_close,
.ioctl = ia_ioctl,
.getsockopt = ia_getsockopt,
.setsockopt = ia_setsockopt,
.send = ia_send,
.phy_put = ia_phy_put,
.phy_get = ia_phy_get,
.change_qos = ia_change_qos,
.proc_read = ia_proc_read,
.owner = THIS_MODULE,
};
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static int ia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct atm_dev *dev;
IADEV *iadev;
int ret;
[ATM] drivers/atm/iphase.c: mostly kmalloc + memset conversion to kzalloc drivers/atm/iphase.c | 111508 -> 111431 (-77 bytes) drivers/atm/iphase.o | 254740 -> 254260 (-480 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-11 06:26:18 +08:00
iadev = kzalloc(sizeof(*iadev), GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!iadev) {
ret = -ENOMEM;
goto err_out;
}
[ATM] drivers/atm/iphase.c: mostly kmalloc + memset conversion to kzalloc drivers/atm/iphase.c | 111508 -> 111431 (-77 bytes) drivers/atm/iphase.o | 254740 -> 254260 (-480 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-11 06:26:18 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
iadev->pci = pdev;
IF_INIT(printk("ia detected at bus:%d dev: %d function:%d\n",
pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));)
if (pci_enable_device(pdev)) {
ret = -ENODEV;
goto err_out_free_iadev;
}
atm: correct sysfs 'device' link creation and parent relationships The ATM subsystem was incorrectly creating the 'device' link for ATM nodes in sysfs. This led to incorrect device/parent relationships exposed by sysfs and udev. Instead of rolling the 'device' link by hand in the generic ATM code, pass each ATM driver's bus device down to the sysfs code and let sysfs do this stuff correctly. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09 03:40:47 +08:00
dev = atm_dev_register(DEV_LABEL, &pdev->dev, &ops, -1, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!dev) {
ret = -ENOMEM;
goto err_out_disable_dev;
}
dev->dev_data = iadev;
IF_INIT(printk(DEV_LABEL "registered at (itf :%d)\n", dev->number);)
atm: fix direct casts of pointers to u32 in the InterPhase driver Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:33:05 +08:00
IF_INIT(printk("dev_id = 0x%p iadev->LineRate = %d \n", dev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
iadev->LineRate);)
atm: [iphase] set drvdata before enabling interrupts Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 08:16:04 +08:00
pci_set_drvdata(pdev, dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ia_dev[iadev_count] = iadev;
_ia_dev[iadev_count] = dev;
iadev_count++;
if (ia_init(dev) || ia_start(dev)) {
IF_INIT(printk("IA register failed!\n");)
iadev_count--;
ia_dev[iadev_count] = NULL;
_ia_dev[iadev_count] = NULL;
ret = -EINVAL;
goto err_out_deregister_dev;
}
IF_EVENT(printk("iadev_count = %d\n", iadev_count);)
iadev->next_board = ia_boards;
ia_boards = dev;
return 0;
err_out_deregister_dev:
atm_dev_deregister(dev);
err_out_disable_dev:
pci_disable_device(pdev);
err_out_free_iadev:
kfree(iadev);
err_out:
return ret;
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static void ia_remove_one(struct pci_dev *pdev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct atm_dev *dev = pci_get_drvdata(pdev);
IADEV *iadev = INPH_IA_DEV(dev);
atm: [iphase] doesn't call phy->start due to a bogus #ifndef This causes the suni driver to oops if you try to use sonetdiag to get the statistics. Also add the corresponding phy->stop call to fix another oops if you try to remove the module. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 08:16:35 +08:00
/* Disable phy interrupts */
ia_phy_put(dev, ia_phy_get(dev, SUNI_RSOP_CIE) & ~(SUNI_RSOP_CIE_LOSE),
SUNI_RSOP_CIE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
udelay(1);
atm: [iphase] doesn't call phy->start due to a bogus #ifndef This causes the suni driver to oops if you try to use sonetdiag to get the statistics. Also add the corresponding phy->stop call to fix another oops if you try to remove the module. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 08:16:35 +08:00
if (dev->phy && dev->phy->stop)
dev->phy->stop(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* De-register device */
free_irq(iadev->irq, dev);
iadev_count--;
ia_dev[iadev_count] = NULL;
_ia_dev[iadev_count] = NULL;
IF_EVENT(printk("deregistering iav at (itf:%d)\n", dev->number);)
atm_dev_deregister(dev);
iounmap(iadev->base);
pci_disable_device(pdev);
ia_free_rx(iadev);
ia_free_tx(iadev);
kfree(iadev);
}
static struct pci_device_id ia_pci_tbl[] = {
{ PCI_VENDOR_ID_IPHASE, 0x0008, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_IPHASE, 0x0009, PCI_ANY_ID, PCI_ANY_ID, },
{ 0,}
};
MODULE_DEVICE_TABLE(pci, ia_pci_tbl);
static struct pci_driver ia_driver = {
.name = DEV_LABEL,
.id_table = ia_pci_tbl,
.probe = ia_init_one,
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
.remove = ia_remove_one,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
static int __init ia_module_init(void)
{
int ret;
ret = pci_register_driver(&ia_driver);
if (ret >= 0) {
ia_timer.expires = jiffies + 3*HZ;
add_timer(&ia_timer);
} else
printk(KERN_ERR DEV_LABEL ": no adapter found\n");
return ret;
}
static void __exit ia_module_exit(void)
{
pci_unregister_driver(&ia_driver);
del_timer(&ia_timer);
}
module_init(ia_module_init);
module_exit(ia_module_exit);