linux_old1/net/sched/sch_netem.c

1117 lines
26 KiB
C
Raw Normal View History

/*
* net/sched/sch_netem.c Network emulator
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License.
*
* Many of the algorithms and ideas for this came from
* NIST Net which is not copyrighted.
*
* Authors: Stephen Hemminger <shemminger@osdl.org>
* Catalin(ux aka Dino) BOIE <catab at umbrella dot ro>
*/
#include <linux/mm.h>
#include <linux/module.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/vmalloc.h>
#include <linux/rtnetlink.h>
#include <linux/reciprocal_div.h>
#include <linux/rbtree.h>
#include <net/netlink.h>
#include <net/pkt_sched.h>
#include <net/inet_ecn.h>
#define VERSION "1.3"
/* Network Emulation Queuing algorithm.
====================================
Sources: [1] Mark Carson, Darrin Santay, "NIST Net - A Linux-based
Network Emulation Tool
[2] Luigi Rizzo, DummyNet for FreeBSD
----------------------------------------------------------------
This started out as a simple way to delay outgoing packets to
test TCP but has grown to include most of the functionality
of a full blown network emulator like NISTnet. It can delay
packets and add random jitter (and correlation). The random
distribution can be loaded from a table as well to provide
normal, Pareto, or experimental curves. Packet loss,
duplication, and reordering can also be emulated.
This qdisc does not do classification that can be handled in
layering other disciplines. It does not need to do bandwidth
control either since that can be handled by using token
bucket or other rate control.
Correlated Loss Generator models
Added generation of correlated loss according to the
"Gilbert-Elliot" model, a 4-state markov model.
References:
[1] NetemCLG Home http://netgroup.uniroma2.it/NetemCLG
[2] S. Salsano, F. Ludovici, A. Ordine, "Definition of a general
and intuitive loss model for packet networks and its implementation
in the Netem module in the Linux kernel", available in [1]
Authors: Stefano Salsano <stefano.salsano at uniroma2.it
Fabio Ludovici <fabio.ludovici at yahoo.it>
*/
struct netem_sched_data {
/* internal t(ime)fifo qdisc uses t_root and sch->limit */
struct rb_root t_root;
/* optional qdisc for classful handling (NULL at netem init) */
struct Qdisc *qdisc;
struct qdisc_watchdog watchdog;
psched_tdiff_t latency;
psched_tdiff_t jitter;
u32 loss;
u32 ecn;
u32 limit;
u32 counter;
u32 gap;
u32 duplicate;
u32 reorder;
u32 corrupt;
u64 rate;
s32 packet_overhead;
u32 cell_size;
reciprocal_divide: update/correction of the algorithm Jakub Zawadzki noticed that some divisions by reciprocal_divide() were not correct [1][2], which he could also show with BPF code after divisions are transformed into reciprocal_value() for runtime invariance which can be passed to reciprocal_divide() later on; reverse in BPF dump ended up with a different, off-by-one K in some situations. This has been fixed by Eric Dumazet in commit aee636c4809fa5 ("bpf: do not use reciprocal divide"). This follow-up patch improves reciprocal_value() and reciprocal_divide() to work in all cases by using Granlund and Montgomery method, so that also future use is safe and without any non-obvious side-effects. Known problems with the old implementation were that division by 1 always returned 0 and some off-by-ones when the dividend and divisor where very large. This seemed to not be problematic with its current users, as far as we can tell. Eric Dumazet checked for the slab usage, we cannot surely say so in the case of flex_array. Still, in order to fix that, we propose an extension from the original implementation from commit 6a2d7a955d8d resp. [3][4], by using the algorithm proposed in "Division by Invariant Integers Using Multiplication" [5], Torbjörn Granlund and Peter L. Montgomery, that is, pseudocode for q = n/d where q, n, d is in u32 universe: 1) Initialization: int l = ceil(log_2 d) uword m' = floor((1<<32)*((1<<l)-d)/d)+1 int sh_1 = min(l,1) int sh_2 = max(l-1,0) 2) For q = n/d, all uword: uword t = (n*m')>>32 q = (t+((n-t)>>sh_1))>>sh_2 The assembler implementation from Agner Fog [6] also helped a lot while implementing. We have tested the implementation on x86_64, ppc64, i686, s390x; on x86_64/haswell we're still half the latency compared to normal divide. Joint work with Daniel Borkmann. [1] http://www.wireshark.org/~darkjames/reciprocal-buggy.c [2] http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c [3] https://gmplib.org/~tege/division-paper.pdf [4] http://homepage.cs.uiowa.edu/~jones/bcd/divide.html [5] http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1.2556 [6] http://www.agner.org/optimize/asmlib.zip Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: Jesse Gross <jesse@nicira.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 09:29:41 +08:00
struct reciprocal_value cell_size_reciprocal;
s32 cell_overhead;
struct crndstate {
u32 last;
u32 rho;
} delay_cor, loss_cor, dup_cor, reorder_cor, corrupt_cor;
struct disttable {
u32 size;
s16 table[0];
} *delay_dist;
enum {
CLG_RANDOM,
CLG_4_STATES,
CLG_GILB_ELL,
} loss_model;
enum {
TX_IN_GAP_PERIOD = 1,
TX_IN_BURST_PERIOD,
LOST_IN_GAP_PERIOD,
LOST_IN_BURST_PERIOD,
} _4_state_model;
enum {
GOOD_STATE = 1,
BAD_STATE,
} GE_state_model;
/* Correlated Loss Generation models */
struct clgstate {
/* state of the Markov chain */
u8 state;
/* 4-states and Gilbert-Elliot models */
u32 a1; /* p13 for 4-states or p for GE */
u32 a2; /* p31 for 4-states or r for GE */
u32 a3; /* p32 for 4-states or h for GE */
u32 a4; /* p14 for 4-states or 1-k for GE */
u32 a5; /* p23 used only in 4-states */
} clg;
};
/* Time stamp put into socket buffer control block
* Only valid when skbs are in our internal t(ime)fifo queue.
*
* As skb->rbnode uses same storage than skb->next, skb->prev and skb->tstamp,
* and skb->next & skb->prev are scratch space for a qdisc,
* we save skb->tstamp value in skb->cb[] before destroying it.
*/
struct netem_skb_cb {
psched_time_t time_to_send;
ktime_t tstamp_save;
};
static struct sk_buff *netem_rb_to_skb(struct rb_node *rb)
{
return container_of(rb, struct sk_buff, rbnode);
}
static inline struct netem_skb_cb *netem_skb_cb(struct sk_buff *skb)
{
/* we assume we can use skb next/prev/tstamp as storage for rb_node */
qdisc_cb_private_validate(skb, sizeof(struct netem_skb_cb));
return (struct netem_skb_cb *)qdisc_skb_cb(skb)->data;
}
/* init_crandom - initialize correlated random number generator
* Use entropy source for initial seed.
*/
static void init_crandom(struct crndstate *state, unsigned long rho)
{
state->rho = rho;
state->last = prandom_u32();
}
/* get_crandom - correlated random number generator
* Next number depends on last value.
* rho is scaled to avoid floating point.
*/
static u32 get_crandom(struct crndstate *state)
{
u64 value, rho;
unsigned long answer;
if (state->rho == 0) /* no correlation */
return prandom_u32();
value = prandom_u32();
rho = (u64)state->rho + 1;
answer = (value * ((1ull<<32) - rho) + state->last * rho) >> 32;
state->last = answer;
return answer;
}
/* loss_4state - 4-state model loss generator
* Generates losses according to the 4-state Markov chain adopted in
* the GI (General and Intuitive) loss model.
*/
static bool loss_4state(struct netem_sched_data *q)
{
struct clgstate *clg = &q->clg;
u32 rnd = prandom_u32();
/*
* Makes a comparison between rnd and the transition
* probabilities outgoing from the current state, then decides the
* next state and if the next packet has to be transmitted or lost.
* The four states correspond to:
* TX_IN_GAP_PERIOD => successfully transmitted packets within a gap period
* LOST_IN_BURST_PERIOD => isolated losses within a gap period
* LOST_IN_GAP_PERIOD => lost packets within a burst period
* TX_IN_GAP_PERIOD => successfully transmitted packets within a burst period
*/
switch (clg->state) {
case TX_IN_GAP_PERIOD:
if (rnd < clg->a4) {
clg->state = LOST_IN_BURST_PERIOD;
return true;
} else if (clg->a4 < rnd && rnd < clg->a1 + clg->a4) {
clg->state = LOST_IN_GAP_PERIOD;
return true;
} else if (clg->a1 + clg->a4 < rnd) {
clg->state = TX_IN_GAP_PERIOD;
}
break;
case TX_IN_BURST_PERIOD:
if (rnd < clg->a5) {
clg->state = LOST_IN_GAP_PERIOD;
return true;
} else {
clg->state = TX_IN_BURST_PERIOD;
}
break;
case LOST_IN_GAP_PERIOD:
if (rnd < clg->a3)
clg->state = TX_IN_BURST_PERIOD;
else if (clg->a3 < rnd && rnd < clg->a2 + clg->a3) {
clg->state = TX_IN_GAP_PERIOD;
} else if (clg->a2 + clg->a3 < rnd) {
clg->state = LOST_IN_GAP_PERIOD;
return true;
}
break;
case LOST_IN_BURST_PERIOD:
clg->state = TX_IN_GAP_PERIOD;
break;
}
return false;
}
/* loss_gilb_ell - Gilbert-Elliot model loss generator
* Generates losses according to the Gilbert-Elliot loss model or
* its special cases (Gilbert or Simple Gilbert)
*
* Makes a comparison between random number and the transition
* probabilities outgoing from the current state, then decides the
* next state. A second random number is extracted and the comparison
* with the loss probability of the current state decides if the next
* packet will be transmitted or lost.
*/
static bool loss_gilb_ell(struct netem_sched_data *q)
{
struct clgstate *clg = &q->clg;
switch (clg->state) {
case GOOD_STATE:
if (prandom_u32() < clg->a1)
clg->state = BAD_STATE;
if (prandom_u32() < clg->a4)
return true;
break;
case BAD_STATE:
if (prandom_u32() < clg->a2)
clg->state = GOOD_STATE;
if (prandom_u32() > clg->a3)
return true;
}
return false;
}
static bool loss_event(struct netem_sched_data *q)
{
switch (q->loss_model) {
case CLG_RANDOM:
/* Random packet drop 0 => none, ~0 => all */
return q->loss && q->loss >= get_crandom(&q->loss_cor);
case CLG_4_STATES:
/* 4state loss model algorithm (used also for GI model)
* Extracts a value from the markov 4 state loss generator,
* if it is 1 drops a packet and if needed writes the event in
* the kernel logs
*/
return loss_4state(q);
case CLG_GILB_ELL:
/* Gilbert-Elliot loss model algorithm
* Extracts a value from the Gilbert-Elliot loss generator,
* if it is 1 drops a packet and if needed writes the event in
* the kernel logs
*/
return loss_gilb_ell(q);
}
return false; /* not reached */
}
/* tabledist - return a pseudo-randomly distributed value with mean mu and
* std deviation sigma. Uses table lookup to approximate the desired
* distribution, and a uniformly-distributed pseudo-random source.
*/
static psched_tdiff_t tabledist(psched_tdiff_t mu, psched_tdiff_t sigma,
struct crndstate *state,
const struct disttable *dist)
{
psched_tdiff_t x;
long t;
u32 rnd;
if (sigma == 0)
return mu;
rnd = get_crandom(state);
/* default uniform distribution */
if (dist == NULL)
return (rnd % (2*sigma)) - sigma + mu;
t = dist->table[rnd % dist->size];
x = (sigma % NETEM_DIST_SCALE) * t;
if (x >= 0)
x += NETEM_DIST_SCALE/2;
else
x -= NETEM_DIST_SCALE/2;
return x / NETEM_DIST_SCALE + (sigma / NETEM_DIST_SCALE) * t + mu;
}
static psched_time_t packet_len_2_sched_time(unsigned int len, struct netem_sched_data *q)
netem: rate extension Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 20:20:26 +08:00
{
u64 ticks;
len += q->packet_overhead;
if (q->cell_size) {
u32 cells = reciprocal_divide(len, q->cell_size_reciprocal);
if (len > cells * q->cell_size) /* extra cell needed for remainder */
cells++;
len = cells * (q->cell_size + q->cell_overhead);
}
ticks = (u64)len * NSEC_PER_SEC;
do_div(ticks, q->rate);
return PSCHED_NS2TICKS(ticks);
netem: rate extension Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 20:20:26 +08:00
}
static void tfifo_reset(struct Qdisc *sch)
{
struct netem_sched_data *q = qdisc_priv(sch);
struct rb_node *p;
while ((p = rb_first(&q->t_root))) {
struct sk_buff *skb = netem_rb_to_skb(p);
rb_erase(p, &q->t_root);
skb->next = NULL;
skb->prev = NULL;
kfree_skb(skb);
}
}
static void tfifo_enqueue(struct sk_buff *nskb, struct Qdisc *sch)
{
struct netem_sched_data *q = qdisc_priv(sch);
psched_time_t tnext = netem_skb_cb(nskb)->time_to_send;
struct rb_node **p = &q->t_root.rb_node, *parent = NULL;
while (*p) {
struct sk_buff *skb;
parent = *p;
skb = netem_rb_to_skb(parent);
if (tnext >= netem_skb_cb(skb)->time_to_send)
p = &parent->rb_right;
else
p = &parent->rb_left;
}
rb_link_node(&nskb->rbnode, parent, p);
rb_insert_color(&nskb->rbnode, &q->t_root);
sch->q.qlen++;
}
/*
* Insert one skb into qdisc.
* Note: parent depends on return value to account for queue length.
* NET_XMIT_DROP: queue length didn't change.
* NET_XMIT_SUCCESS: one skb was queued.
*/
static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch)
{
struct netem_sched_data *q = qdisc_priv(sch);
/* We don't fill cb now as skb_unshare() may invalidate it */
struct netem_skb_cb *cb;
struct sk_buff *skb2;
int count = 1;
/* Random duplication */
if (q->duplicate && q->duplicate >= get_crandom(&q->dup_cor))
++count;
/* Drop packet? */
if (loss_event(q)) {
if (q->ecn && INET_ECN_set_ce(skb))
qdisc_qstats_drop(sch); /* mark packet */
else
--count;
}
if (count == 0) {
qdisc_qstats_drop(sch);
kfree_skb(skb);
return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
}
/* If a delay is expected, orphan the skb. (orphaning usually takes
* place at TX completion time, so _before_ the link transit delay)
*/
if (q->latency || q->jitter)
skb_orphan_partial(skb);
/*
* If we need to duplicate packet, then re-insert at top of the
* qdisc tree, since parent queuer expects that only one
* skb will be queued.
*/
if (count > 1 && (skb2 = skb_clone(skb, GFP_ATOMIC)) != NULL) {
struct Qdisc *rootq = qdisc_root(sch);
u32 dupsave = q->duplicate; /* prevent duplicating a dup... */
q->duplicate = 0;
rootq->enqueue(skb2, rootq);
q->duplicate = dupsave;
}
/*
* Randomized packet corruption.
* Make copy if needed since we are modifying
* If packet is going to be hardware checksummed, then
* do it now in software before we mangle it.
*/
if (q->corrupt && q->corrupt >= get_crandom(&q->corrupt_cor)) {
if (!(skb = skb_unshare(skb, GFP_ATOMIC)) ||
(skb->ip_summed == CHECKSUM_PARTIAL &&
skb_checksum_help(skb)))
return qdisc_drop(skb, sch);
skb->data[prandom_u32() % skb_headlen(skb)] ^=
1<<(prandom_u32() % 8);
}
if (unlikely(skb_queue_len(&sch->q) >= sch->limit))
return qdisc_reshape_fail(skb, sch);
qdisc_qstats_backlog_inc(sch, skb);
cb = netem_skb_cb(skb);
if (q->gap == 0 || /* not doing reordering */
q->counter < q->gap - 1 || /* inside last reordering gap */
q->reorder < get_crandom(&q->reorder_cor)) {
psched_time_t now;
psched_tdiff_t delay;
delay = tabledist(q->latency, q->jitter,
&q->delay_cor, q->delay_dist);
now = psched_get_time();
netem: rate extension Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 20:20:26 +08:00
if (q->rate) {
struct sk_buff *last;
netem: rate extension Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 20:20:26 +08:00
if (!skb_queue_empty(&sch->q))
last = skb_peek_tail(&sch->q);
else
last = netem_rb_to_skb(rb_last(&q->t_root));
if (last) {
netem: rate extension Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 20:20:26 +08:00
/*
* Last packet in queue is reference point (now),
* calculate this time bonus and subtract
netem: rate extension Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 20:20:26 +08:00
* from delay.
*/
delay -= netem_skb_cb(last)->time_to_send - now;
delay = max_t(psched_tdiff_t, 0, delay);
now = netem_skb_cb(last)->time_to_send;
netem: rate extension Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 20:20:26 +08:00
}
delay += packet_len_2_sched_time(qdisc_pkt_len(skb), q);
netem: rate extension Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 20:20:26 +08:00
}
cb->time_to_send = now + delay;
cb->tstamp_save = skb->tstamp;
++q->counter;
tfifo_enqueue(skb, sch);
} else {
/*
* Do re-ordering by putting one out of N packets at the front
* of the queue.
*/
cb->time_to_send = psched_get_time();
q->counter = 0;
__skb_queue_head(&sch->q, skb);
sch->qstats.requeues++;
}
return NET_XMIT_SUCCESS;
}
static unsigned int netem_drop(struct Qdisc *sch)
{
struct netem_sched_data *q = qdisc_priv(sch);
unsigned int len;
len = qdisc_queue_drop(sch);
if (!len) {
struct rb_node *p = rb_first(&q->t_root);
if (p) {
struct sk_buff *skb = netem_rb_to_skb(p);
rb_erase(p, &q->t_root);
sch->q.qlen--;
skb->next = NULL;
skb->prev = NULL;
qdisc_qstats_backlog_dec(sch, skb);
kfree_skb(skb);
}
}
if (!len && q->qdisc && q->qdisc->ops->drop)
len = q->qdisc->ops->drop(q->qdisc);
if (len)
qdisc_qstats_drop(sch);
return len;
}
static struct sk_buff *netem_dequeue(struct Qdisc *sch)
{
struct netem_sched_data *q = qdisc_priv(sch);
struct sk_buff *skb;
struct rb_node *p;
if (qdisc_is_throttled(sch))
return NULL;
tfifo_dequeue:
skb = __skb_dequeue(&sch->q);
if (skb) {
qdisc_qstats_backlog_dec(sch, skb);
netem: Fixes byte backlog accounting for the first of two chained netem instances Fixes byte backlog accounting for the first of two chained netem instances. Bytes backlog reported now corresponds to the number of queued packets. When two netem instances are chained, for instance to apply rate and queue limitation followed by packet delay, the number of backlogged bytes reported by the first netem instance is wrong. It reports the sum of bytes in the queues of the first and second netem. The first netem reports the correct number of backlogged packets but not bytes. This is shown in the example below. Consider a chain of two netem schedulers created using the following commands: $ tc -s qdisc replace dev veth2 root handle 1:0 netem rate 10000kbit limit 100 $ tc -s qdisc add dev veth2 parent 1:0 handle 2: netem delay 50ms Start an iperf session to send packets out on the specified interface and monitor the backlog using tc: $ tc -s qdisc show dev veth2 Output using unpatched netem: qdisc netem 1: root refcnt 2 limit 100 rate 10000Kbit Sent 98422639 bytes 65434 pkt (dropped 123, overlimits 0 requeues 0) backlog 172694b 73p requeues 0 qdisc netem 2: parent 1: limit 1000 delay 50.0ms Sent 98422639 bytes 65434 pkt (dropped 0, overlimits 0 requeues 0) backlog 63588b 42p requeues 0 The interface used to produce this output has an MTU of 1500. The output for backlogged bytes behind netem 1 is 172694b. This value is not correct. Consider the total number of sent bytes and packets. By dividing the number of sent bytes by the number of sent packets, we get an average packet size of ~=1504. If we divide the number of backlogged bytes by packets, we get ~=2365. This is due to the first netem incorrectly counting the 63588b which are in netem 2's queue as being in its own queue. To verify this is the case, we subtract them from the reported value and divide by the number of packets as follows: 172694 - 63588 = 109106 bytes actualled backlogged in netem 1 109106 / 73 packets ~= 1494 bytes (which matches our MTU) The root cause is that the byte accounting is not done at the same time with packet accounting. The solution is to update the backlog value every time the packet queue is updated. Signed-off-by: Joseph D Beshay <joseph.beshay@utdallas.edu> Acked-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07 02:00:56 +08:00
deliver:
qdisc_unthrottled(sch);
qdisc_bstats_update(sch, skb);
return skb;
}
p = rb_first(&q->t_root);
if (p) {
psched_time_t time_to_send;
skb = netem_rb_to_skb(p);
/* if more time remaining? */
time_to_send = netem_skb_cb(skb)->time_to_send;
if (time_to_send <= psched_get_time()) {
rb_erase(p, &q->t_root);
sch->q.qlen--;
netem: Fixes byte backlog accounting for the first of two chained netem instances Fixes byte backlog accounting for the first of two chained netem instances. Bytes backlog reported now corresponds to the number of queued packets. When two netem instances are chained, for instance to apply rate and queue limitation followed by packet delay, the number of backlogged bytes reported by the first netem instance is wrong. It reports the sum of bytes in the queues of the first and second netem. The first netem reports the correct number of backlogged packets but not bytes. This is shown in the example below. Consider a chain of two netem schedulers created using the following commands: $ tc -s qdisc replace dev veth2 root handle 1:0 netem rate 10000kbit limit 100 $ tc -s qdisc add dev veth2 parent 1:0 handle 2: netem delay 50ms Start an iperf session to send packets out on the specified interface and monitor the backlog using tc: $ tc -s qdisc show dev veth2 Output using unpatched netem: qdisc netem 1: root refcnt 2 limit 100 rate 10000Kbit Sent 98422639 bytes 65434 pkt (dropped 123, overlimits 0 requeues 0) backlog 172694b 73p requeues 0 qdisc netem 2: parent 1: limit 1000 delay 50.0ms Sent 98422639 bytes 65434 pkt (dropped 0, overlimits 0 requeues 0) backlog 63588b 42p requeues 0 The interface used to produce this output has an MTU of 1500. The output for backlogged bytes behind netem 1 is 172694b. This value is not correct. Consider the total number of sent bytes and packets. By dividing the number of sent bytes by the number of sent packets, we get an average packet size of ~=1504. If we divide the number of backlogged bytes by packets, we get ~=2365. This is due to the first netem incorrectly counting the 63588b which are in netem 2's queue as being in its own queue. To verify this is the case, we subtract them from the reported value and divide by the number of packets as follows: 172694 - 63588 = 109106 bytes actualled backlogged in netem 1 109106 / 73 packets ~= 1494 bytes (which matches our MTU) The root cause is that the byte accounting is not done at the same time with packet accounting. The solution is to update the backlog value every time the packet queue is updated. Signed-off-by: Joseph D Beshay <joseph.beshay@utdallas.edu> Acked-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07 02:00:56 +08:00
qdisc_qstats_backlog_dec(sch, skb);
skb->next = NULL;
skb->prev = NULL;
skb->tstamp = netem_skb_cb(skb)->tstamp_save;
#ifdef CONFIG_NET_CLS_ACT
/*
* If it's at ingress let's pretend the delay is
* from the network (tstamp will be updated).
*/
if (G_TC_FROM(skb->tc_verd) & AT_INGRESS)
skb->tstamp.tv64 = 0;
#endif
if (q->qdisc) {
int err = qdisc_enqueue(skb, q->qdisc);
if (unlikely(err != NET_XMIT_SUCCESS)) {
if (net_xmit_drop_count(err)) {
qdisc_qstats_drop(sch);
qdisc_tree_decrease_qlen(sch, 1);
}
}
goto tfifo_dequeue;
}
goto deliver;
}
if (q->qdisc) {
skb = q->qdisc->ops->dequeue(q->qdisc);
if (skb)
goto deliver;
}
qdisc_watchdog_schedule(&q->watchdog, time_to_send);
}
if (q->qdisc) {
skb = q->qdisc->ops->dequeue(q->qdisc);
if (skb)
goto deliver;
}
return NULL;
}
static void netem_reset(struct Qdisc *sch)
{
struct netem_sched_data *q = qdisc_priv(sch);
qdisc_reset_queue(sch);
tfifo_reset(sch);
if (q->qdisc)
qdisc_reset(q->qdisc);
qdisc_watchdog_cancel(&q->watchdog);
}
static void dist_free(struct disttable *d)
{
kvfree(d);
}
/*
* Distribution data is a variable size payload containing
* signed 16 bit values.
*/
static int get_dist_table(struct Qdisc *sch, const struct nlattr *attr)
{
struct netem_sched_data *q = qdisc_priv(sch);
size_t n = nla_len(attr)/sizeof(__s16);
const __s16 *data = nla_data(attr);
spinlock_t *root_lock;
struct disttable *d;
int i;
size_t s;
if (n > NETEM_DIST_MAX)
return -EINVAL;
s = sizeof(struct disttable) + n * sizeof(s16);
d = kmalloc(s, GFP_KERNEL | __GFP_NOWARN);
if (!d)
d = vmalloc(s);
if (!d)
return -ENOMEM;
d->size = n;
for (i = 0; i < n; i++)
d->table[i] = data[i];
root_lock = qdisc_root_sleeping_lock(sch);
spin_lock_bh(root_lock);
swap(q->delay_dist, d);
spin_unlock_bh(root_lock);
dist_free(d);
return 0;
}
static void get_correlation(struct netem_sched_data *q, const struct nlattr *attr)
{
const struct tc_netem_corr *c = nla_data(attr);
init_crandom(&q->delay_cor, c->delay_corr);
init_crandom(&q->loss_cor, c->loss_corr);
init_crandom(&q->dup_cor, c->dup_corr);
}
static void get_reorder(struct netem_sched_data *q, const struct nlattr *attr)
{
const struct tc_netem_reorder *r = nla_data(attr);
q->reorder = r->probability;
init_crandom(&q->reorder_cor, r->correlation);
}
static void get_corrupt(struct netem_sched_data *q, const struct nlattr *attr)
{
const struct tc_netem_corrupt *r = nla_data(attr);
q->corrupt = r->probability;
init_crandom(&q->corrupt_cor, r->correlation);
}
static void get_rate(struct netem_sched_data *q, const struct nlattr *attr)
netem: rate extension Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 20:20:26 +08:00
{
const struct tc_netem_rate *r = nla_data(attr);
q->rate = r->rate;
q->packet_overhead = r->packet_overhead;
q->cell_size = r->cell_size;
reciprocal_divide: update/correction of the algorithm Jakub Zawadzki noticed that some divisions by reciprocal_divide() were not correct [1][2], which he could also show with BPF code after divisions are transformed into reciprocal_value() for runtime invariance which can be passed to reciprocal_divide() later on; reverse in BPF dump ended up with a different, off-by-one K in some situations. This has been fixed by Eric Dumazet in commit aee636c4809fa5 ("bpf: do not use reciprocal divide"). This follow-up patch improves reciprocal_value() and reciprocal_divide() to work in all cases by using Granlund and Montgomery method, so that also future use is safe and without any non-obvious side-effects. Known problems with the old implementation were that division by 1 always returned 0 and some off-by-ones when the dividend and divisor where very large. This seemed to not be problematic with its current users, as far as we can tell. Eric Dumazet checked for the slab usage, we cannot surely say so in the case of flex_array. Still, in order to fix that, we propose an extension from the original implementation from commit 6a2d7a955d8d resp. [3][4], by using the algorithm proposed in "Division by Invariant Integers Using Multiplication" [5], Torbjörn Granlund and Peter L. Montgomery, that is, pseudocode for q = n/d where q, n, d is in u32 universe: 1) Initialization: int l = ceil(log_2 d) uword m' = floor((1<<32)*((1<<l)-d)/d)+1 int sh_1 = min(l,1) int sh_2 = max(l-1,0) 2) For q = n/d, all uword: uword t = (n*m')>>32 q = (t+((n-t)>>sh_1))>>sh_2 The assembler implementation from Agner Fog [6] also helped a lot while implementing. We have tested the implementation on x86_64, ppc64, i686, s390x; on x86_64/haswell we're still half the latency compared to normal divide. Joint work with Daniel Borkmann. [1] http://www.wireshark.org/~darkjames/reciprocal-buggy.c [2] http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c [3] https://gmplib.org/~tege/division-paper.pdf [4] http://homepage.cs.uiowa.edu/~jones/bcd/divide.html [5] http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1.2556 [6] http://www.agner.org/optimize/asmlib.zip Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: Jesse Gross <jesse@nicira.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 09:29:41 +08:00
q->cell_overhead = r->cell_overhead;
if (q->cell_size)
q->cell_size_reciprocal = reciprocal_value(q->cell_size);
reciprocal_divide: update/correction of the algorithm Jakub Zawadzki noticed that some divisions by reciprocal_divide() were not correct [1][2], which he could also show with BPF code after divisions are transformed into reciprocal_value() for runtime invariance which can be passed to reciprocal_divide() later on; reverse in BPF dump ended up with a different, off-by-one K in some situations. This has been fixed by Eric Dumazet in commit aee636c4809fa5 ("bpf: do not use reciprocal divide"). This follow-up patch improves reciprocal_value() and reciprocal_divide() to work in all cases by using Granlund and Montgomery method, so that also future use is safe and without any non-obvious side-effects. Known problems with the old implementation were that division by 1 always returned 0 and some off-by-ones when the dividend and divisor where very large. This seemed to not be problematic with its current users, as far as we can tell. Eric Dumazet checked for the slab usage, we cannot surely say so in the case of flex_array. Still, in order to fix that, we propose an extension from the original implementation from commit 6a2d7a955d8d resp. [3][4], by using the algorithm proposed in "Division by Invariant Integers Using Multiplication" [5], Torbjörn Granlund and Peter L. Montgomery, that is, pseudocode for q = n/d where q, n, d is in u32 universe: 1) Initialization: int l = ceil(log_2 d) uword m' = floor((1<<32)*((1<<l)-d)/d)+1 int sh_1 = min(l,1) int sh_2 = max(l-1,0) 2) For q = n/d, all uword: uword t = (n*m')>>32 q = (t+((n-t)>>sh_1))>>sh_2 The assembler implementation from Agner Fog [6] also helped a lot while implementing. We have tested the implementation on x86_64, ppc64, i686, s390x; on x86_64/haswell we're still half the latency compared to normal divide. Joint work with Daniel Borkmann. [1] http://www.wireshark.org/~darkjames/reciprocal-buggy.c [2] http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c [3] https://gmplib.org/~tege/division-paper.pdf [4] http://homepage.cs.uiowa.edu/~jones/bcd/divide.html [5] http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1.2556 [6] http://www.agner.org/optimize/asmlib.zip Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: Jesse Gross <jesse@nicira.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 09:29:41 +08:00
else
q->cell_size_reciprocal = (struct reciprocal_value) { 0 };
netem: rate extension Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 20:20:26 +08:00
}
static int get_loss_clg(struct netem_sched_data *q, const struct nlattr *attr)
{
const struct nlattr *la;
int rem;
nla_for_each_nested(la, attr, rem) {
u16 type = nla_type(la);
switch (type) {
case NETEM_LOSS_GI: {
const struct tc_netem_gimodel *gi = nla_data(la);
if (nla_len(la) < sizeof(struct tc_netem_gimodel)) {
pr_info("netem: incorrect gi model size\n");
return -EINVAL;
}
q->loss_model = CLG_4_STATES;
q->clg.state = TX_IN_GAP_PERIOD;
q->clg.a1 = gi->p13;
q->clg.a2 = gi->p31;
q->clg.a3 = gi->p32;
q->clg.a4 = gi->p14;
q->clg.a5 = gi->p23;
break;
}
case NETEM_LOSS_GE: {
const struct tc_netem_gemodel *ge = nla_data(la);
if (nla_len(la) < sizeof(struct tc_netem_gemodel)) {
pr_info("netem: incorrect ge model size\n");
return -EINVAL;
}
q->loss_model = CLG_GILB_ELL;
q->clg.state = GOOD_STATE;
q->clg.a1 = ge->p;
q->clg.a2 = ge->r;
q->clg.a3 = ge->h;
q->clg.a4 = ge->k1;
break;
}
default:
pr_info("netem: unknown loss type %u\n", type);
return -EINVAL;
}
}
return 0;
}
static const struct nla_policy netem_policy[TCA_NETEM_MAX + 1] = {
[TCA_NETEM_CORR] = { .len = sizeof(struct tc_netem_corr) },
[TCA_NETEM_REORDER] = { .len = sizeof(struct tc_netem_reorder) },
[TCA_NETEM_CORRUPT] = { .len = sizeof(struct tc_netem_corrupt) },
netem: rate extension Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 20:20:26 +08:00
[TCA_NETEM_RATE] = { .len = sizeof(struct tc_netem_rate) },
[TCA_NETEM_LOSS] = { .type = NLA_NESTED },
[TCA_NETEM_ECN] = { .type = NLA_U32 },
[TCA_NETEM_RATE64] = { .type = NLA_U64 },
};
static int parse_attr(struct nlattr *tb[], int maxtype, struct nlattr *nla,
const struct nla_policy *policy, int len)
{
int nested_len = nla_len(nla) - NLA_ALIGN(len);
if (nested_len < 0) {
pr_info("netem: invalid attributes len %d\n", nested_len);
return -EINVAL;
}
if (nested_len >= nla_attr_size(0))
return nla_parse(tb, maxtype, nla_data(nla) + NLA_ALIGN(len),
nested_len, policy);
memset(tb, 0, sizeof(struct nlattr *) * (maxtype + 1));
return 0;
}
/* Parse netlink message to set options */
static int netem_change(struct Qdisc *sch, struct nlattr *opt)
{
struct netem_sched_data *q = qdisc_priv(sch);
struct nlattr *tb[TCA_NETEM_MAX + 1];
struct tc_netem_qopt *qopt;
struct clgstate old_clg;
int old_loss_model = CLG_RANDOM;
int ret;
if (opt == NULL)
return -EINVAL;
qopt = nla_data(opt);
ret = parse_attr(tb, TCA_NETEM_MAX, opt, netem_policy, sizeof(*qopt));
if (ret < 0)
return ret;
/* backup q->clg and q->loss_model */
old_clg = q->clg;
old_loss_model = q->loss_model;
if (tb[TCA_NETEM_LOSS]) {
ret = get_loss_clg(q, tb[TCA_NETEM_LOSS]);
if (ret) {
q->loss_model = old_loss_model;
return ret;
}
} else {
q->loss_model = CLG_RANDOM;
}
if (tb[TCA_NETEM_DELAY_DIST]) {
ret = get_dist_table(sch, tb[TCA_NETEM_DELAY_DIST]);
if (ret) {
/* recover clg and loss_model, in case of
* q->clg and q->loss_model were modified
* in get_loss_clg()
*/
q->clg = old_clg;
q->loss_model = old_loss_model;
return ret;
}
}
sch->limit = qopt->limit;
q->latency = qopt->latency;
q->jitter = qopt->jitter;
q->limit = qopt->limit;
q->gap = qopt->gap;
q->counter = 0;
q->loss = qopt->loss;
q->duplicate = qopt->duplicate;
/* for compatibility with earlier versions.
* if gap is set, need to assume 100% probability
*/
if (q->gap)
q->reorder = ~0;
if (tb[TCA_NETEM_CORR])
get_correlation(q, tb[TCA_NETEM_CORR]);
if (tb[TCA_NETEM_REORDER])
get_reorder(q, tb[TCA_NETEM_REORDER]);
if (tb[TCA_NETEM_CORRUPT])
get_corrupt(q, tb[TCA_NETEM_CORRUPT]);
netem: rate extension Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 20:20:26 +08:00
if (tb[TCA_NETEM_RATE])
get_rate(q, tb[TCA_NETEM_RATE]);
netem: rate extension Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 20:20:26 +08:00
if (tb[TCA_NETEM_RATE64])
q->rate = max_t(u64, q->rate,
nla_get_u64(tb[TCA_NETEM_RATE64]));
if (tb[TCA_NETEM_ECN])
q->ecn = nla_get_u32(tb[TCA_NETEM_ECN]);
return ret;
}
static int netem_init(struct Qdisc *sch, struct nlattr *opt)
{
struct netem_sched_data *q = qdisc_priv(sch);
int ret;
if (!opt)
return -EINVAL;
qdisc_watchdog_init(&q->watchdog, sch);
q->loss_model = CLG_RANDOM;
ret = netem_change(sch, opt);
if (ret)
pr_info("netem: change failed\n");
return ret;
}
static void netem_destroy(struct Qdisc *sch)
{
struct netem_sched_data *q = qdisc_priv(sch);
qdisc_watchdog_cancel(&q->watchdog);
if (q->qdisc)
qdisc_destroy(q->qdisc);
dist_free(q->delay_dist);
}
static int dump_loss_model(const struct netem_sched_data *q,
struct sk_buff *skb)
{
struct nlattr *nest;
nest = nla_nest_start(skb, TCA_NETEM_LOSS);
if (nest == NULL)
goto nla_put_failure;
switch (q->loss_model) {
case CLG_RANDOM:
/* legacy loss model */
nla_nest_cancel(skb, nest);
return 0; /* no data */
case CLG_4_STATES: {
struct tc_netem_gimodel gi = {
.p13 = q->clg.a1,
.p31 = q->clg.a2,
.p32 = q->clg.a3,
.p14 = q->clg.a4,
.p23 = q->clg.a5,
};
if (nla_put(skb, NETEM_LOSS_GI, sizeof(gi), &gi))
goto nla_put_failure;
break;
}
case CLG_GILB_ELL: {
struct tc_netem_gemodel ge = {
.p = q->clg.a1,
.r = q->clg.a2,
.h = q->clg.a3,
.k1 = q->clg.a4,
};
if (nla_put(skb, NETEM_LOSS_GE, sizeof(ge), &ge))
goto nla_put_failure;
break;
}
}
nla_nest_end(skb, nest);
return 0;
nla_put_failure:
nla_nest_cancel(skb, nest);
return -1;
}
static int netem_dump(struct Qdisc *sch, struct sk_buff *skb)
{
const struct netem_sched_data *q = qdisc_priv(sch);
struct nlattr *nla = (struct nlattr *) skb_tail_pointer(skb);
struct tc_netem_qopt qopt;
struct tc_netem_corr cor;
struct tc_netem_reorder reorder;
struct tc_netem_corrupt corrupt;
netem: rate extension Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 20:20:26 +08:00
struct tc_netem_rate rate;
qopt.latency = q->latency;
qopt.jitter = q->jitter;
qopt.limit = q->limit;
qopt.loss = q->loss;
qopt.gap = q->gap;
qopt.duplicate = q->duplicate;
if (nla_put(skb, TCA_OPTIONS, sizeof(qopt), &qopt))
goto nla_put_failure;
cor.delay_corr = q->delay_cor.rho;
cor.loss_corr = q->loss_cor.rho;
cor.dup_corr = q->dup_cor.rho;
if (nla_put(skb, TCA_NETEM_CORR, sizeof(cor), &cor))
goto nla_put_failure;
reorder.probability = q->reorder;
reorder.correlation = q->reorder_cor.rho;
if (nla_put(skb, TCA_NETEM_REORDER, sizeof(reorder), &reorder))
goto nla_put_failure;
corrupt.probability = q->corrupt;
corrupt.correlation = q->corrupt_cor.rho;
if (nla_put(skb, TCA_NETEM_CORRUPT, sizeof(corrupt), &corrupt))
goto nla_put_failure;
if (q->rate >= (1ULL << 32)) {
if (nla_put_u64(skb, TCA_NETEM_RATE64, q->rate))
goto nla_put_failure;
rate.rate = ~0U;
} else {
rate.rate = q->rate;
}
rate.packet_overhead = q->packet_overhead;
rate.cell_size = q->cell_size;
rate.cell_overhead = q->cell_overhead;
if (nla_put(skb, TCA_NETEM_RATE, sizeof(rate), &rate))
goto nla_put_failure;
netem: rate extension Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 20:20:26 +08:00
if (q->ecn && nla_put_u32(skb, TCA_NETEM_ECN, q->ecn))
goto nla_put_failure;
if (dump_loss_model(q, skb) != 0)
goto nla_put_failure;
return nla_nest_end(skb, nla);
nla_put_failure:
nlmsg_trim(skb, nla);
return -1;
}
static int netem_dump_class(struct Qdisc *sch, unsigned long cl,
struct sk_buff *skb, struct tcmsg *tcm)
{
struct netem_sched_data *q = qdisc_priv(sch);
if (cl != 1 || !q->qdisc) /* only one class */
return -ENOENT;
tcm->tcm_handle |= TC_H_MIN(1);
tcm->tcm_info = q->qdisc->handle;
return 0;
}
static int netem_graft(struct Qdisc *sch, unsigned long arg, struct Qdisc *new,
struct Qdisc **old)
{
struct netem_sched_data *q = qdisc_priv(sch);
sch_tree_lock(sch);
*old = q->qdisc;
q->qdisc = new;
if (*old) {
qdisc_tree_decrease_qlen(*old, (*old)->q.qlen);
qdisc_reset(*old);
}
sch_tree_unlock(sch);
return 0;
}
static struct Qdisc *netem_leaf(struct Qdisc *sch, unsigned long arg)
{
struct netem_sched_data *q = qdisc_priv(sch);
return q->qdisc;
}
static unsigned long netem_get(struct Qdisc *sch, u32 classid)
{
return 1;
}
static void netem_put(struct Qdisc *sch, unsigned long arg)
{
}
static void netem_walk(struct Qdisc *sch, struct qdisc_walker *walker)
{
if (!walker->stop) {
if (walker->count >= walker->skip)
if (walker->fn(sch, 1, walker) < 0) {
walker->stop = 1;
return;
}
walker->count++;
}
}
static const struct Qdisc_class_ops netem_class_ops = {
.graft = netem_graft,
.leaf = netem_leaf,
.get = netem_get,
.put = netem_put,
.walk = netem_walk,
.dump = netem_dump_class,
};
static struct Qdisc_ops netem_qdisc_ops __read_mostly = {
.id = "netem",
.cl_ops = &netem_class_ops,
.priv_size = sizeof(struct netem_sched_data),
.enqueue = netem_enqueue,
.dequeue = netem_dequeue,
.peek = qdisc_peek_dequeued,
.drop = netem_drop,
.init = netem_init,
.reset = netem_reset,
.destroy = netem_destroy,
.change = netem_change,
.dump = netem_dump,
.owner = THIS_MODULE,
};
static int __init netem_module_init(void)
{
pr_info("netem: version " VERSION "\n");
return register_qdisc(&netem_qdisc_ops);
}
static void __exit netem_module_exit(void)
{
unregister_qdisc(&netem_qdisc_ops);
}
module_init(netem_module_init)
module_exit(netem_module_exit)
MODULE_LICENSE("GPL");