p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/drivers/usb/core/quirks.c

341 lines
10 KiB
C
Raw Normal View History

USB: add a blacklist for devices that can't handle some things we throw at them. This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-26 21:26:21 +08:00
/*
* USB device quirk handling logic and table
*
* Copyright (c) 2007 Oliver Neukum
* Copyright (c) 2007 Greg Kroah-Hartman <gregkh@suse.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
*
*/
#include <linux/usb.h>
#include <linux/usb/quirks.h>
usb: core: implement AMD remote wakeup quirk The following patch is required to resolve remote wake issues with certain devices. Issue description: If the remote wake is issued from the device in a specific timing condition while the system is entering sleep state then it may cause system to auto wake on subsequent sleep cycle. Root cause: Host controller rebroadcasts the Resume signal > 100 µseconds after receiving the original resume event from the device. For proper function, some devices may require the rebroadcast of resume event within the USB spec of 100µS. Workaroud: 1. Filter the AMD platforms with Yangtze chipset, then judge of all the usb devices are mouse or not. And get out the port id which attached a mouse with Pixart controller. 2. Then reset the port which attached issue device during system resume from S3. [Q] Why the special devices are only mice? Would high speed devices such as 3G modem or USB Bluetooth adapter trigger this issue? - Current this sensitivity is only confined to devices that use Pixart controllers. This controller is designed for use with LS mouse devices only. We have not observed any other devices failing. There may be a small risk for other devices also but this patch (reset device in resume phase) will cover the cases if required. [Q] Shouldn’t the resume signal be sent within 100 us for every device? - The Host controller may not send the resume signal within 100us, this our host controller specification change. This is why we require the patch to prevent side effects on certain known devices. [Q] Why would clicking mouse INTENSELY to wake the system up trigger this issue? - This behavior is specific to the devices that use Pixart controller. It is timing dependent on when the resume event is triggered during the sleep state. [Q] Is it a host controller issue or mouse? - It is the host controller behavior during resume that triggers the device incorrect behavior on the next resume. This patch sets USB_QUIRK_RESET_RESUME flag for these Pixart-based mice when they attached to platforms with AMD Yangtze chipset. Signed-off-by: Huang Rui <ray.huang@amd.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-16 23:47:28 +08:00
#include <linux/usb/hcd.h>
USB: add a blacklist for devices that can't handle some things we throw at them. This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-26 21:26:21 +08:00
#include "usb.h"
usb: Add quirk detection based on interface information When a whole class of devices (possibly from a specific vendor, or across multiple vendors) require a quirk, explictly listing all devices in the class make the quirks table unnecessarily large. Fix this by allowing matching devices based on interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:13 +08:00
/* Lists of quirky USB devices, split in device quirks and interface quirks.
* Device quirks are applied at the very beginning of the enumeration process,
* right after reading the device descriptor. They can thus only match on device
* information.
*
* Interface quirks are applied after reading all the configuration descriptors.
* They can match on both device and interface information.
*
* Note that the DELAY_INIT and HONOR_BNUMINTERFACES quirks do not make sense as
* interface quirks, as they only influence the enumeration process which is run
* before processing the interface quirks.
*
* Please keep the lists ordered by:
USB: add a blacklist for devices that can't handle some things we throw at them. This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-26 21:26:21 +08:00
* 1) Vendor ID
* 2) Product ID
* 3) Class ID
*/
static const struct usb_device_id usb_quirk_list[] = {
USB: quirky flash drive That drive is quite odd. It has 2K sectors, times out getting string descriptors and needs a quirk. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-04 22:11:41 +08:00
/* CBM - Flash disk */
{ USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
USB: spruce up the device blacklist This patch (as1040) fixes up the blacklist of USB device quirks. A couple of lines are broken to comply with the 80-column rule, and entries are sorted into the proper numerical order. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-28 04:43:47 +08:00
USB: add a blacklist for devices that can't handle some things we throw at them. This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-26 21:26:21 +08:00
/* HP 5300/5370C scanner */
USB: spruce up the device blacklist This patch (as1040) fixes up the blacklist of USB device quirks. A couple of lines are broken to comply with the 80-column rule, and entries are sorted into the proper numerical order. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-28 04:43:47 +08:00
{ USB_DEVICE(0x03f0, 0x0701), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
USB: another quirky device (LCD display) this time it is an LCD. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-28 16:34:22 +08:00
USB: quirks for known quirky audio devices RESET_RESUME entries for some sound devices that need it. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-04 23:34:11 +08:00
/* Creative SB Audigy 2 NX */
{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
usb: quirks: Fix sorting Properly sort all the entries by vendor id. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-19 23:12:19 +08:00
/* USB3503 */
{ USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME },
usb-quirks: Add reset-resume quirk for MS Wireless Laser Mouse 6000 This wireless mouse receiver needs a reset-resume quirk to properly come out of reset. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1165206 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-24 18:22:38 +08:00
/* Microsoft Wireless Laser Mouse 6000 Receiver */
{ USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME },
USB: Add device quirk for Microsoft VX700 webcam Add device quirk for Microsoft Lifecam VX700 v2.0 webcams. Fixes squeaking noise of the microphone. Signed-off-by: Andreas Fleig <andreasfleig@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-05 23:17:49 +08:00
/* Microsoft LifeCam-VX700 v2.0 */
{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e We've encountered a rare issue when enumerating two Logitech webcams after a reboot that doesn't power cycle the USB ports. They are spewing random data (possibly some leftover UVC buffers) on the second (full-sized) Get Configuration request of the enumeration phase. Since the data is random this can potentially cause all kinds of odd behavior, and since it occasionally happens multiple times (after the kernel issues another reset due to the garbled configuration descriptor), it is not always recoverable. Set the USB_DELAY_INIT quirk that seems to work around the issue. Signed-off-by: Julius Werner <jwerner@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-05 02:52:39 +08:00
/* Logitech HD Pro Webcams C920 and C930e */
{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT },
usb: Add device quirk for Logitech PTZ cameras Add a device quirk for the Logitech PTZ Pro Camera and its sibling the ConferenceCam CC3000e Camera. This fixes the failed camera enumeration on some boot, particularly on machines with fast CPU. Tested by connecting a Logitech PTZ Pro Camera to a machine with a Haswell Core i7-4600U CPU @ 2.10GHz, and doing thousands of reboot cycles while recording the kernel logs and taking camera picture after each boot. Before the patch, more than 7% of the boots show some enumeration transfer failures and in a few of them, the kernel is giving up before actually enumerating the webcam. After the patch, the enumeration has been correct on every reboot. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-02 05:10:22 +08:00
/* Logitech ConferenceCam CC3000e */
{ USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x0848), .driver_info = USB_QUIRK_DELAY_INIT },
/* Logitech PTZ Pro Camera */
{ USB_DEVICE(0x046d, 0x0853), .driver_info = USB_QUIRK_DELAY_INIT },
usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams Most Logitech UVC webcams (both early models that don't advertise UVC compatibility and newer UVC-advertised devices) require the RESET_RESUME quirk. Instead of listing each and every model, match the devices based on the UVC interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:14 +08:00
/* Logitech Quickcam Fusion */
{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
USB: add RESET_RESUME for webcams shown to be quirky The new runtime PM code has shown that many webcams suffer from a race condition that may crash them upon resume. Runtime PM is especially prone to show the problem because it retains power to the cameras at all times. However system suspension may also crash the devices and retain power to the devices. The only way to solve this problem without races is in usbcore with the RESET_RESUME quirk. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-13 14:42:21 +08:00
usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams Most Logitech UVC webcams (both early models that don't advertise UVC compatibility and newer UVC-advertised devices) require the RESET_RESUME quirk. Instead of listing each and every model, match the devices based on the UVC interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:14 +08:00
/* Logitech Quickcam Orbit MP */
{ USB_DEVICE(0x046d, 0x08c2), .driver_info = USB_QUIRK_RESET_RESUME },
USB: add RESET_RESUME for webcams shown to be quirky The new runtime PM code has shown that many webcams suffer from a race condition that may crash them upon resume. Runtime PM is especially prone to show the problem because it retains power to the cameras at all times. However system suspension may also crash the devices and retain power to the devices. The only way to solve this problem without races is in usbcore with the RESET_RESUME quirk. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-13 14:42:21 +08:00
usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams Most Logitech UVC webcams (both early models that don't advertise UVC compatibility and newer UVC-advertised devices) require the RESET_RESUME quirk. Instead of listing each and every model, match the devices based on the UVC interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:14 +08:00
/* Logitech Quickcam Pro for Notebook */
{ USB_DEVICE(0x046d, 0x08c3), .driver_info = USB_QUIRK_RESET_RESUME },
USB: add quirk for Logitech C300 web cam My webcam is a Logitech C300 and I get "chipmunk"ed squeaky sound. The following trivial patch fixes it. Signed-off-by: Jon Levell <linuxusb@coralbark.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-30 03:42:52 +08:00
usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams Most Logitech UVC webcams (both early models that don't advertise UVC compatibility and newer UVC-advertised devices) require the RESET_RESUME quirk. Instead of listing each and every model, match the devices based on the UVC interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:14 +08:00
/* Logitech Quickcam Pro 5000 */
{ USB_DEVICE(0x046d, 0x08c5), .driver_info = USB_QUIRK_RESET_RESUME },
USB: add RESET_RESUME for webcams shown to be quirky The new runtime PM code has shown that many webcams suffer from a race condition that may crash them upon resume. Runtime PM is especially prone to show the problem because it retains power to the cameras at all times. However system suspension may also crash the devices and retain power to the devices. The only way to solve this problem without races is in usbcore with the RESET_RESUME quirk. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-13 14:42:21 +08:00
usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams Most Logitech UVC webcams (both early models that don't advertise UVC compatibility and newer UVC-advertised devices) require the RESET_RESUME quirk. Instead of listing each and every model, match the devices based on the UVC interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:14 +08:00
/* Logitech Quickcam OEM Dell Notebook */
{ USB_DEVICE(0x046d, 0x08c6), .driver_info = USB_QUIRK_RESET_RESUME },
USB: add quirk for Logitech C600 web cam We've had another report of the "chipmunk" sound on a Logitech C600 webcam. This patch resolves the issue. Cc: stable <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-27 01:53:17 +08:00
usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams Most Logitech UVC webcams (both early models that don't advertise UVC compatibility and newer UVC-advertised devices) require the RESET_RESUME quirk. Instead of listing each and every model, match the devices based on the UVC interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:14 +08:00
/* Logitech Quickcam OEM Cisco VT Camera II */
{ USB_DEVICE(0x046d, 0x08c7), .driver_info = USB_QUIRK_RESET_RESUME },
USB: quirks: adding more quirky webcams to avoid squeaky audio The following patch contains additional affected webcam models, on top of the patches commited to linux-next 2394d67e446bf616a0885167d5f0d397bdacfdfc and 5b253d88cc6c65a23cefc457a5a4ef139913c5fc Signed-off-by: sordna <sordna@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-28 12:06:26 +08:00
USB delay init quirk for logitech Harmony 700-series devices The Logitech Harmony 700 series needs an extra delay during initialization. This patch adds a USB quirk which enables such a delay and adds the device to the quirks list. Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-22 06:05:01 +08:00
/* Logitech Harmony 700-series */
{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
USB: spruce up the device blacklist This patch (as1040) fixes up the blacklist of USB device quirks. A couple of lines are broken to comply with the 80-column rule, and entries are sorted into the proper numerical order. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-28 04:43:47 +08:00
/* Philips PSC805 audio device */
{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
USB: Add reset-resume quirk for two Plantronics usb headphones. These two headphones need a reset-resume quirk to properly resume to original volume level. Signed-off-by: Yao-Wen Mao <yaowen@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-31 14:24:09 +08:00
/* Plantronic Audio 655 DSP */
{ USB_DEVICE(0x047f, 0xc008), .driver_info = USB_QUIRK_RESET_RESUME },
/* Plantronic Audio 648 USB */
{ USB_DEVICE(0x047f, 0xc013), .driver_info = USB_QUIRK_RESET_RESUME },
USB: adds Artisman USB dongle to list of quirky devices When an attempt is made to read the interface strings of the Artisman Watchdog USB dongle (idVendor:idProduct 04b4:0526) an error is written to the dmesg log (uhci_result_common: failed with status 440000) and the dongle resets itself, resulting in a disconnect/reconnect loop. Adding the dongle to the list of devices in quirks.c, with the same quirk Alan Stern's previous patch for the Saitek Cyborg Gold 3D joystick, stops the device from resetting and allows it to be used with no problems. Signed-off-by: Paul Mortier <mortier@btinternet.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-09 20:18:50 +08:00
/* Artisman Watchdog Dongle */
{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
USB: add device quirk for Joss Optical touchboard This patch (as1604) adds a CONFIG_INTF_STRINGS quirk for the Joss infrared touchboard device. The device doesn't like to be asked for its interface strings. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: adam ? <adam3337@wp.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-04 22:41:02 +08:00
/* Microchip Joss Optical infrared touchboard device */
{ USB_DEVICE(0x04d8, 0x000c), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
usb: add two quirky touchscreen These devices tend to become unresponsive after S3 Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14 17:01:46 +08:00
/* CarrolTouch 4000U */
{ USB_DEVICE(0x04e7, 0x0009), .driver_info = USB_QUIRK_RESET_RESUME },
/* CarrolTouch 4500U */
{ USB_DEVICE(0x04e7, 0x0030), .driver_info = USB_QUIRK_RESET_RESUME },
USB: Add quirk for Samsung Android phone modem My Galaxy Spica needs this quirk when in modem mode, otherwise it causes endless USB bus resets and is unusable in this mode. Unfortunately Samsung decided to reuse ID of its old CDMA phone SGH-I500 for the modem part. That's why in addition to this patch the visor driver must be prevented from binding to SPH-I500 ID, so ACM driver can do that. Signed-off-by: Maciej Szmigiero <mhej@o2.pl> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-06 04:52:00 +08:00
/* Samsung Android phone modem - ID conflict with SPH-I500 */
{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
USB: quirks: enable device-qualifier quirk for Elan Touchscreen Enable device-qualifier quirk for Elan Touchscreen, which often fails to handle requests for the device_descriptor. Note that the device sometimes do respond properly with a Request Error (three times as USB core retries), but usually fails to respond at all. When this happens any further descriptor requests also fails, for example: [ 1528.688934] usb 2-7: new full-speed USB device number 4 using xhci_hcd [ 1530.945588] usb 2-7: unable to read config index 0 descriptor/start: -71 [ 1530.945592] usb 2-7: can't read configurations, error -71 This has been observed repeating for over a minute before eventual successful enumeration. Reported-by: Drew Von Spreecken <drewvs@gmail.com> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-25 23:51:27 +08:00
/* Elan Touchscreen */
{ USB_DEVICE(0x04f3, 0x0089), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
USB: quirks: enable device-qualifier quirk for another Elan touchscreen Currently this quirk is enabled for the model with the device id 0x0089, it is needed for the 0x009b model, which is found on the Fujitsu Lifebook u904 as well. Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-09 15:29:29 +08:00
{ USB_DEVICE(0x04f3, 0x009b), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
HID: yet another buggy ELAN touchscreen The touchscreen needs the same quirk as the other models. Signed-off-by: Oliver Neukum <oneukum@suse.de> Reported-by: Bryan Poling <poli0048@umn.edu> CC: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-18 00:11:42 +08:00
{ USB_DEVICE(0x04f3, 0x010c), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
Added another USB product ID for ELAN touchscreen quirks. I've had the same issue as described in commit c68929f75dfcb6354918862b91b5778585de1fa5 Except my touchscreen's ID is ID 04f3:0125 Elan Microelectronics Corp. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10 01:09:11 +08:00
{ USB_DEVICE(0x04f3, 0x0125), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
USB: quirks: enable device-qualifier quirk for yet another Elan touchscreen Yet another device affected by this. Tested-by: Kevin Fenzi <kevin@scrye.com> Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-09 15:29:30 +08:00
{ USB_DEVICE(0x04f3, 0x016f), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
usb: quirks: Add no-lpm quirk for Elan BugLink: http://bugs.launchpad.net/bugs/1498667 As reported in BugLink, this device has an issue with Linux Power Management so adding a quirk. This quirk was reccomended by Alan Stern: http://lkml.iu.edu/hypermail/linux/kernel/1606.2/05590.html Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-07 09:18:51 +08:00
{ USB_DEVICE(0x04f3, 0x0381), .driver_info =
USB_QUIRK_NO_LPM },
USB: quirks: Fix another ELAN touchscreen Like other buggy models that had their fixes [1], the touchscreen with id 04f3:21b8 from ELAN Microelectronics needs the device-qualifier quirk. Otherwise, it fails to respond, blocks the boot for a random amount of time and pollutes dmesg with: [ 2887.373196] usb 1-5: new full-speed USB device number 41 using xhci_hcd [ 2889.502000] usb 1-5: unable to read config index 0 descriptor/start: -71 [ 2889.502005] usb 1-5: can't read configurations, error -71 [ 2889.654571] usb 1-5: new full-speed USB device number 42 using xhci_hcd [ 2891.783438] usb 1-5: unable to read config index 0 descriptor/start: -71 [ 2891.783443] usb 1-5: can't read configurations, error -71 [1]: See commits c68929f, 876af5d, d749947, a32c99e and dc703ec. Tested-by: Adrien Vergé <adrienverge@gmail.com> Signed-off-by: Adrien Vergé <adrienverge@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-24 23:02:04 +08:00
{ USB_DEVICE(0x04f3, 0x21b8), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
USB: quirks for known quirky audio devices RESET_RESUME entries for some sound devices that need it. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-04 23:34:11 +08:00
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
/* Edirol SD-20 */
{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
USB: reset resume quirk needed by a hub Werner Fink has reported problems with this hub. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-30 16:18:04 +08:00
/* Alcor Micro Corp. Hub */
{ USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME },
Input: appletouch - implement reset-resume logic On some boxes the touchpad needs to be reinitialized after resume to make it function again. This fixes bugzilla #10825. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-17 23:56:55 +08:00
/* appletouch */
{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
USB: add another scanner quirk Like the HP53{00,70} scanner other devices of the OEM Avision require the USB_QUIRK_STRING_FETCH_255 to correct set a configuration with "recent" Linux kernels. Signed-off-by: René Rebe <rene@exactcode.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-27 15:05:46 +08:00
/* Avision AV600U */
{ USB_DEVICE(0x0638, 0x0a13), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
USB: add quirk to avoid config and interface strings Apparently the Configuration and Interface strings aren't used as often as the Vendor, Product, and Serial strings. In at least one device (a Saitek Cyborg Gold 3D joystick), attempts to read the Configuration string cause the device to stop responding to Control requests. This patch (as1226) adds a quirks flag, telling the kernel not to read a device's Configuration or Interface strings, together with a new quirk for the offending joystick. Reported-by: Melchior FRANZ <melchior.franz@gmail.com> Tested-by: Melchior FRANZ <melchior.franz@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> [2.6.28 and 2.6.29, nothing earlier] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-19 02:28:53 +08:00
/* Saitek Cyborg Gold Joystick */
{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
USB: add quirk for another camera The Guillemot Webcam Hercules Dualpix Exchange camera has been reported with a second ID. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-03 16:58:54 +08:00
/* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */
USB: add RESET_RESUME for webcams shown to be quirky The new runtime PM code has shown that many webcams suffer from a race condition that may crash them upon resume. Runtime PM is especially prone to show the problem because it retains power to the cameras at all times. However system suspension may also crash the devices and retain power to the devices. The only way to solve this problem without races is in usbcore with the RESET_RESUME quirk. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-13 14:42:21 +08:00
{ USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
USB: add quirk for another camera The Guillemot Webcam Hercules Dualpix Exchange camera has been reported with a second ID. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-03 16:58:54 +08:00
/* Guillemot Webcam Hercules Dualpix Exchange*/
{ USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME },
usb: add USB_QUIRK_RESET_RESUME for M-Audio 88es Tested-by: Steffen Müller <steffen.mueller@radio-frei.de> Signed-off-by: Steffen Müller <steffen.mueller@radio-frei.de> Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-30 19:05:34 +08:00
/* Midiman M-Audio Keystation 88es */
{ USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME },
USB: More USB_QUIRK_RESET_RESUME devices I would like have the attached patch added to Linux kernel. The three usb flash memories listed in the patch are being used in Intel's ClassmatePC and need USB_QUIRK_RESET_RESUME to work reliably when resuming from ram.
2007-09-04 23:15:08 +08:00
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
USB: add quirks entry for Keytouch QWERTY Panel This patch (as1448) adds a quirks entry for the Keytouch QWERTY Panel firmware, used in the IEC 60945 keyboard. This device crashes during enumeration when the computer asks for its configuration string descriptor. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: kholis <nur.kholis.majid@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 23:26:38 +08:00
/* Keytouch QWERTY Panel keyboard */
{ USB_DEVICE(0x0926, 0x3333), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
USB: new quirk flag to avoid Set-Interface This patch (as1057) fixes a problem with the X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter; the device crashes when it receives a Set-Interface request. A new quirk (USB_QUIRK_NO_SET_INTF) is introduced and a quirks entry is created for this device. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-11 22:20:12 +08:00
/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
USB: add quirk for Broadcom BT dongle This device needs to be reset when resuming Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-15 00:26:22 +08:00
/* Broadcom BCM92035DGROM BT dongle */
{ USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },
USB: quirks.c: add one device that cannot deal with suspension The device is not responsive when resumed, unless it is reset. Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-14 22:22:40 +08:00
/* MAYA44USB sound device */
{ USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME },
usb: quirks: Fix sorting Properly sort all the entries by vendor id. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-19 23:12:19 +08:00
/* ASUS Base Station(T100) */
{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
USB_QUIRK_IGNORE_REMOTE_WAKEUP },
USB: spruce up the device blacklist This patch (as1040) fixes up the blacklist of USB device quirks. A couple of lines are broken to comply with the 80-column rule, and entries are sorted into the proper numerical order. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-28 04:43:47 +08:00
/* Action Semiconductor flash disk */
{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
USB: Don't autosuspend Blackberry devices. Blackberry devices charge over USB. By autosuspending the port, they are not able to charge reliably. Signed-off-by: Jeremy Katz <katzj@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-20 05:16:10 +08:00
USB: More USB_QUIRK_RESET_RESUME devices I would like have the attached patch added to Linux kernel. The three usb flash memories listed in the patch are being used in Intel's ClassmatePC and need USB_QUIRK_RESET_RESUME to work reliably when resuming from ram.
2007-09-04 23:15:08 +08:00
/* SKYMEDI USB_DRIVE */
{ USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
USB: add a blacklist for devices that can't handle some things we throw at them. This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-26 21:26:21 +08:00
usb-core bInterval quirk This patch adds a usb quirk to support devices with interupt endpoints and bInterval values expressed as microframes. The quirk causes the parse endpoint function to modify the reported bInterval to a standards conforming value. There is currently code in the endpoint parser that checks for bIntervals that are outside of the valid range (1-16 for USB 2+ high speed and super speed interupt endpoints). In this case, the code assumes the bInterval is being reported in 1ms frames. As well, the correction is only applied if the original bInterval value is out of the 1-16 range. With this quirk applied to the device, the bInterval will be accurately adjusted from microframes to an exponent. Signed-off-by: James P Michels III <james.p.michels@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28 01:28:04 +08:00
/* Razer - Razer Blade Keyboard */
{ USB_DEVICE(0x1532, 0x0116), .driver_info =
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
USB: Add a new quirk: USB_QUIRK_HONOR_BNUMINTERFACES Add a new quirk USB_QUIRK_HONOR_BNUMINTERFACES, when this quirk is set and a device has more interface descriptors in a configuration then it claims to have in config->bNumInterfaces, ignore all additional interfaces. This is needed for devices which try to hide unused interfaces by only lowering config->bNumInterfaces, and which can't handle if you try to talk to the "hidden" interfaces. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-29 18:03:17 +08:00
/* BUILDWIN Photo Frame */
{ USB_DEVICE(0x1908, 0x1315), .driver_info =
USB_QUIRK_HONOR_BNUMINTERFACES },
USB: Add OTG PET device to TPL OTG device shall support this device for allowing compliance automated testing. The modification is derived from Pavankumar and Vijayavardhans' previous work. Signed-off-by: Macpaul Lin <macpaul@gmail.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Vijayavardhan Vennapusa <vvreddy@codeaurora.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-23 14:39:02 +08:00
/* Protocol and OTG Electrical Test Device */
{ USB_DEVICE(0x1a0a, 0x0200), .driver_info =
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
usb: quirks: Add no-lpm quirk for Acer C120 LED Projector The Acer C120 LED Projector is a USB-3 connected pico projector which takes both its power and video data from USB-3. In combination with some hubs this device does not play well with lpm, so disable lpm for it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-19 23:12:20 +08:00
/* Acer C120 LED Projector */
{ USB_DEVICE(0x1de1, 0xc102), .driver_info = USB_QUIRK_NO_LPM },
USB: add quirk for devices with broken LPM Some USB device / host controller combinations seem to have problems with Link Power Management. For example, Steinar found that his xHCI controller wouldn't handle bandwidth calculations correctly for two video cards simultaneously when LPM was enabled, even though the bus had plenty of bandwidth available. This patch introduces a new quirk flag for devices that should remain disabled for LPM, and creates quirk entries for Steinar's devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-11 04:27:21 +08:00
/* Blackmagic Design Intensity Shuttle */
{ USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM },
/* Blackmagic Design UltraStudio SDI */
{ USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM },
usb: quirks: Fix sorting Properly sort all the entries by vendor id. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-19 23:12:19 +08:00
/* INTEL VALUE SSD */
{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
USB: add a blacklist for devices that can't handle some things we throw at them. This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-26 21:26:21 +08:00
{ } /* terminating entry must be last */
};
usb: Add quirk detection based on interface information When a whole class of devices (possibly from a specific vendor, or across multiple vendors) require a quirk, explictly listing all devices in the class make the quirks table unnecessarily large. Fix this by allowing matching devices based on interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:13 +08:00
static const struct usb_device_id usb_interface_quirk_list[] = {
usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams Most Logitech UVC webcams (both early models that don't advertise UVC compatibility and newer UVC-advertised devices) require the RESET_RESUME quirk. Instead of listing each and every model, match the devices based on the UVC interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:14 +08:00
/* Logitech UVC Cameras */
{ USB_VENDOR_AND_INTERFACE_INFO(0x046d, USB_CLASS_VIDEO, 1, 0),
.driver_info = USB_QUIRK_RESET_RESUME },
usb: Add quirk detection based on interface information When a whole class of devices (possibly from a specific vendor, or across multiple vendors) require a quirk, explictly listing all devices in the class make the quirks table unnecessarily large. Fix this by allowing matching devices based on interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:13 +08:00
{ } /* terminating entry must be last */
};
usb: core: implement AMD remote wakeup quirk The following patch is required to resolve remote wake issues with certain devices. Issue description: If the remote wake is issued from the device in a specific timing condition while the system is entering sleep state then it may cause system to auto wake on subsequent sleep cycle. Root cause: Host controller rebroadcasts the Resume signal > 100 µseconds after receiving the original resume event from the device. For proper function, some devices may require the rebroadcast of resume event within the USB spec of 100µS. Workaroud: 1. Filter the AMD platforms with Yangtze chipset, then judge of all the usb devices are mouse or not. And get out the port id which attached a mouse with Pixart controller. 2. Then reset the port which attached issue device during system resume from S3. [Q] Why the special devices are only mice? Would high speed devices such as 3G modem or USB Bluetooth adapter trigger this issue? - Current this sensitivity is only confined to devices that use Pixart controllers. This controller is designed for use with LS mouse devices only. We have not observed any other devices failing. There may be a small risk for other devices also but this patch (reset device in resume phase) will cover the cases if required. [Q] Shouldn’t the resume signal be sent within 100 us for every device? - The Host controller may not send the resume signal within 100us, this our host controller specification change. This is why we require the patch to prevent side effects on certain known devices. [Q] Why would clicking mouse INTENSELY to wake the system up trigger this issue? - This behavior is specific to the devices that use Pixart controller. It is timing dependent on when the resume event is triggered during the sleep state. [Q] Is it a host controller issue or mouse? - It is the host controller behavior during resume that triggers the device incorrect behavior on the next resume. This patch sets USB_QUIRK_RESET_RESUME flag for these Pixart-based mice when they attached to platforms with AMD Yangtze chipset. Signed-off-by: Huang Rui <ray.huang@amd.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-16 23:47:28 +08:00
static const struct usb_device_id usb_amd_resume_quirk_list[] = {
/* Lenovo Mouse with Pixart controller */
{ USB_DEVICE(0x17ef, 0x602e), .driver_info = USB_QUIRK_RESET_RESUME },
/* Pixart Mouse */
{ USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Optical Mouse M90/M100 */
{ USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME },
{ } /* terminating entry must be last */
};
usb: Add quirk detection based on interface information When a whole class of devices (possibly from a specific vendor, or across multiple vendors) require a quirk, explictly listing all devices in the class make the quirks table unnecessarily large. Fix this by allowing matching devices based on interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:13 +08:00
static bool usb_match_any_interface(struct usb_device *udev,
const struct usb_device_id *id)
{
unsigned int i;
for (i = 0; i < udev->descriptor.bNumConfigurations; ++i) {
struct usb_host_config *cfg = &udev->config[i];
unsigned int j;
for (j = 0; j < cfg->desc.bNumInterfaces; ++j) {
struct usb_interface_cache *cache;
struct usb_host_interface *intf;
cache = cfg->intf_cache[j];
if (cache->num_altsetting == 0)
continue;
intf = &cache->altsetting[0];
if (usb_match_one_id_intf(udev, intf, id))
return true;
}
}
return false;
}
usb: core: usb_amd_resume_quirk() can be static Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-27 02:56:50 +08:00
static int usb_amd_resume_quirk(struct usb_device *udev)
usb: core: implement AMD remote wakeup quirk The following patch is required to resolve remote wake issues with certain devices. Issue description: If the remote wake is issued from the device in a specific timing condition while the system is entering sleep state then it may cause system to auto wake on subsequent sleep cycle. Root cause: Host controller rebroadcasts the Resume signal > 100 µseconds after receiving the original resume event from the device. For proper function, some devices may require the rebroadcast of resume event within the USB spec of 100µS. Workaroud: 1. Filter the AMD platforms with Yangtze chipset, then judge of all the usb devices are mouse or not. And get out the port id which attached a mouse with Pixart controller. 2. Then reset the port which attached issue device during system resume from S3. [Q] Why the special devices are only mice? Would high speed devices such as 3G modem or USB Bluetooth adapter trigger this issue? - Current this sensitivity is only confined to devices that use Pixart controllers. This controller is designed for use with LS mouse devices only. We have not observed any other devices failing. There may be a small risk for other devices also but this patch (reset device in resume phase) will cover the cases if required. [Q] Shouldn’t the resume signal be sent within 100 us for every device? - The Host controller may not send the resume signal within 100us, this our host controller specification change. This is why we require the patch to prevent side effects on certain known devices. [Q] Why would clicking mouse INTENSELY to wake the system up trigger this issue? - This behavior is specific to the devices that use Pixart controller. It is timing dependent on when the resume event is triggered during the sleep state. [Q] Is it a host controller issue or mouse? - It is the host controller behavior during resume that triggers the device incorrect behavior on the next resume. This patch sets USB_QUIRK_RESET_RESUME flag for these Pixart-based mice when they attached to platforms with AMD Yangtze chipset. Signed-off-by: Huang Rui <ray.huang@amd.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-16 23:47:28 +08:00
{
struct usb_hcd *hcd;
hcd = bus_to_hcd(udev->bus);
/* The device should be attached directly to root hub */
if (udev->level == 1 && hcd->amd_resume_bug == 1)
return 1;
return 0;
}
usb: Add quirk detection based on interface information When a whole class of devices (possibly from a specific vendor, or across multiple vendors) require a quirk, explictly listing all devices in the class make the quirks table unnecessarily large. Fix this by allowing matching devices based on interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:13 +08:00
static u32 __usb_detect_quirks(struct usb_device *udev,
const struct usb_device_id *id)
USB: add a blacklist for devices that can't handle some things we throw at them. This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-26 21:26:21 +08:00
{
usb: Add quirk detection based on interface information When a whole class of devices (possibly from a specific vendor, or across multiple vendors) require a quirk, explictly listing all devices in the class make the quirks table unnecessarily large. Fix this by allowing matching devices based on interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:13 +08:00
u32 quirks = 0;
USB: add a blacklist for devices that can't handle some things we throw at them. This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-26 21:26:21 +08:00
usb: Add quirk detection based on interface information When a whole class of devices (possibly from a specific vendor, or across multiple vendors) require a quirk, explictly listing all devices in the class make the quirks table unnecessarily large. Fix this by allowing matching devices based on interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:13 +08:00
for (; id->match_flags; id++) {
if (!usb_match_device(udev, id))
continue;
if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_INFO) &&
!usb_match_any_interface(udev, id))
continue;
quirks |= (u32)(id->driver_info);
USB: add a blacklist for devices that can't handle some things we throw at them. This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-26 21:26:21 +08:00
}
usb: Add quirk detection based on interface information When a whole class of devices (possibly from a specific vendor, or across multiple vendors) require a quirk, explictly listing all devices in the class make the quirks table unnecessarily large. Fix this by allowing matching devices based on interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:13 +08:00
return quirks;
USB: add a blacklist for devices that can't handle some things we throw at them. This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-26 21:26:21 +08:00
}
/*
* Detect any quirks the device has, and do any housekeeping for it if needed.
*/
void usb_detect_quirks(struct usb_device *udev)
{
usb: Add quirk detection based on interface information When a whole class of devices (possibly from a specific vendor, or across multiple vendors) require a quirk, explictly listing all devices in the class make the quirks table unnecessarily large. Fix this by allowing matching devices based on interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:13 +08:00
udev->quirks = __usb_detect_quirks(udev, usb_quirk_list);
usb: core: implement AMD remote wakeup quirk The following patch is required to resolve remote wake issues with certain devices. Issue description: If the remote wake is issued from the device in a specific timing condition while the system is entering sleep state then it may cause system to auto wake on subsequent sleep cycle. Root cause: Host controller rebroadcasts the Resume signal > 100 µseconds after receiving the original resume event from the device. For proper function, some devices may require the rebroadcast of resume event within the USB spec of 100µS. Workaroud: 1. Filter the AMD platforms with Yangtze chipset, then judge of all the usb devices are mouse or not. And get out the port id which attached a mouse with Pixart controller. 2. Then reset the port which attached issue device during system resume from S3. [Q] Why the special devices are only mice? Would high speed devices such as 3G modem or USB Bluetooth adapter trigger this issue? - Current this sensitivity is only confined to devices that use Pixart controllers. This controller is designed for use with LS mouse devices only. We have not observed any other devices failing. There may be a small risk for other devices also but this patch (reset device in resume phase) will cover the cases if required. [Q] Shouldn’t the resume signal be sent within 100 us for every device? - The Host controller may not send the resume signal within 100us, this our host controller specification change. This is why we require the patch to prevent side effects on certain known devices. [Q] Why would clicking mouse INTENSELY to wake the system up trigger this issue? - This behavior is specific to the devices that use Pixart controller. It is timing dependent on when the resume event is triggered during the sleep state. [Q] Is it a host controller issue or mouse? - It is the host controller behavior during resume that triggers the device incorrect behavior on the next resume. This patch sets USB_QUIRK_RESET_RESUME flag for these Pixart-based mice when they attached to platforms with AMD Yangtze chipset. Signed-off-by: Huang Rui <ray.huang@amd.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-16 23:47:28 +08:00
/*
* Pixart-based mice would trigger remote wakeup issue on AMD
* Yangtze chipset, so set them as RESET_RESUME flag.
*/
if (usb_amd_resume_quirk(udev))
udev->quirks |= __usb_detect_quirks(udev,
usb_amd_resume_quirk_list);
USB: add a blacklist for devices that can't handle some things we throw at them. This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-26 21:26:21 +08:00
if (udev->quirks)
dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
usb: Add quirk detection based on interface information When a whole class of devices (possibly from a specific vendor, or across multiple vendors) require a quirk, explictly listing all devices in the class make the quirks table unnecessarily large. Fix this by allowing matching devices based on interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:13 +08:00
udev->quirks);
USB: add a blacklist for devices that can't handle some things we throw at them. This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-26 21:26:21 +08:00
usb: Make USB persist default configurable Commit 9214d1d8 set the USB persist flag as a default for all devices. This might be desirable for some distributions, but it certainly has its trade-offs... most importantly, it can significantly increase system resume time, because the kernel blocks on resuming (and sometimes resetting) USB devices before it unfreezes userspace. This patch introduces a new config option CONFIG_USB_DEFAULT_PERSIST, which allows distributions to make this decision on their own without the need to carry a custom patch or revert the kernel's setting in userspace. [edited the Kconfig help text a bit - gregkh] Signed-off-by: Julius Werner <jwerner@chromium.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14 06:57:31 +08:00
#ifdef CONFIG_USB_DEFAULT_PERSIST
if (!(udev->quirks & USB_QUIRK_RESET))
USB: remove CONFIG_USB_PERSIST setting This patch (as1047) removes the USB_PERSIST Kconfig option, enabling it permanently. It also prevents the power/persist attribute from being created for hub devices; there's no point in having it since USB-PERSIST is always turned on for hubs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 04:15:59 +08:00
udev->persist_enabled = 1;
#else
usb: Make USB persist default configurable Commit 9214d1d8 set the USB persist flag as a default for all devices. This might be desirable for some distributions, but it certainly has its trade-offs... most importantly, it can significantly increase system resume time, because the kernel blocks on resuming (and sometimes resetting) USB devices before it unfreezes userspace. This patch introduces a new config option CONFIG_USB_DEFAULT_PERSIST, which allows distributions to make this decision on their own without the need to carry a custom patch or revert the kernel's setting in userspace. [edited the Kconfig help text a bit - gregkh] Signed-off-by: Julius Werner <jwerner@chromium.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14 06:57:31 +08:00
/* Hubs are automatically enabled for USB-PERSIST */
if (udev->descriptor.bDeviceClass == USB_CLASS_HUB)
USB: storage: Never reset devices that will morph to an old mode Some devices must be switched to a new mode to fully use them. A reset would make them revert to the old mode. Therefore a reset must not be used for error handling with such devices. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 19:14:21 +08:00
udev->persist_enabled = 1;
usb: Make USB persist default configurable Commit 9214d1d8 set the USB persist flag as a default for all devices. This might be desirable for some distributions, but it certainly has its trade-offs... most importantly, it can significantly increase system resume time, because the kernel blocks on resuming (and sometimes resetting) USB devices before it unfreezes userspace. This patch introduces a new config option CONFIG_USB_DEFAULT_PERSIST, which allows distributions to make this decision on their own without the need to carry a custom patch or revert the kernel's setting in userspace. [edited the Kconfig help text a bit - gregkh] Signed-off-by: Julius Werner <jwerner@chromium.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14 06:57:31 +08:00
#endif /* CONFIG_USB_DEFAULT_PERSIST */
USB: add a blacklist for devices that can't handle some things we throw at them. This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-26 21:26:21 +08:00
}
usb: Add quirk detection based on interface information When a whole class of devices (possibly from a specific vendor, or across multiple vendors) require a quirk, explictly listing all devices in the class make the quirks table unnecessarily large. Fix this by allowing matching devices based on interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19 18:39:13 +08:00
void usb_detect_interface_quirks(struct usb_device *udev)
{
u32 quirks;
quirks = __usb_detect_quirks(udev, usb_interface_quirk_list);
if (quirks == 0)
return;
dev_dbg(&udev->dev, "USB interface quirks for this device: %x\n",
quirks);
udev->quirks |= quirks;
}