linux_old1/crypto/asymmetric_keys/pkcs7_verify.c

362 lines
9.6 KiB
C
Raw Normal View History

/* Verify the signature on a PKCS#7 message.
*
* Copyright (C) 2012 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#define pr_fmt(fmt) "PKCS7: "fmt
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/asn1.h>
#include <crypto/hash.h>
#include "public_key.h"
#include "pkcs7_parser.h"
/*
* Digest the relevant parts of the PKCS#7 data
*/
static int pkcs7_digest(struct pkcs7_message *pkcs7,
struct pkcs7_signed_info *sinfo)
{
struct crypto_shash *tfm;
struct shash_desc *desc;
size_t digest_size, desc_size;
void *digest;
int ret;
kenter(",%u,%u", sinfo->index, sinfo->sig.pkey_hash_algo);
if (sinfo->sig.pkey_hash_algo >= PKEY_HASH__LAST ||
!hash_algo_name[sinfo->sig.pkey_hash_algo])
return -ENOPKG;
/* Allocate the hashing algorithm we're going to need and find out how
* big the hash operational data will be.
*/
tfm = crypto_alloc_shash(hash_algo_name[sinfo->sig.pkey_hash_algo],
0, 0);
if (IS_ERR(tfm))
return (PTR_ERR(tfm) == -ENOENT) ? -ENOPKG : PTR_ERR(tfm);
desc_size = crypto_shash_descsize(tfm) + sizeof(*desc);
sinfo->sig.digest_size = digest_size = crypto_shash_digestsize(tfm);
ret = -ENOMEM;
digest = kzalloc(digest_size + desc_size, GFP_KERNEL);
if (!digest)
goto error_no_desc;
desc = digest + digest_size;
desc->tfm = tfm;
desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP;
/* Digest the message [RFC2315 9.3] */
ret = crypto_shash_init(desc);
if (ret < 0)
goto error;
ret = crypto_shash_finup(desc, pkcs7->data, pkcs7->data_len, digest);
if (ret < 0)
goto error;
pr_devel("MsgDigest = [%*ph]\n", 8, digest);
/* However, if there are authenticated attributes, there must be a
* message digest attribute amongst them which corresponds to the
* digest we just calculated.
*/
if (sinfo->msgdigest) {
u8 tag;
if (sinfo->msgdigest_len != sinfo->sig.digest_size) {
pr_debug("Sig %u: Invalid digest size (%u)\n",
sinfo->index, sinfo->msgdigest_len);
ret = -EBADMSG;
goto error;
}
if (memcmp(digest, sinfo->msgdigest, sinfo->msgdigest_len) != 0) {
pr_debug("Sig %u: Message digest doesn't match\n",
sinfo->index);
ret = -EKEYREJECTED;
goto error;
}
/* We then calculate anew, using the authenticated attributes
* as the contents of the digest instead. Note that we need to
* convert the attributes from a CONT.0 into a SET before we
* hash it.
*/
memset(digest, 0, sinfo->sig.digest_size);
ret = crypto_shash_init(desc);
if (ret < 0)
goto error;
tag = ASN1_CONS_BIT | ASN1_SET;
ret = crypto_shash_update(desc, &tag, 1);
if (ret < 0)
goto error;
ret = crypto_shash_finup(desc, sinfo->authattrs,
sinfo->authattrs_len, digest);
if (ret < 0)
goto error;
pr_devel("AADigest = [%*ph]\n", 8, digest);
}
sinfo->sig.digest = digest;
digest = NULL;
error:
kfree(digest);
error_no_desc:
crypto_free_shash(tfm);
kleave(" = %d", ret);
return ret;
}
/*
* Find the key (X.509 certificate) to use to verify a PKCS#7 message. PKCS#7
* uses the issuer's name and the issuing certificate serial number for
* matching purposes. These must match the certificate issuer's name (not
* subject's name) and the certificate serial number [RFC 2315 6.7].
*/
static int pkcs7_find_key(struct pkcs7_message *pkcs7,
struct pkcs7_signed_info *sinfo)
{
struct x509_certificate *x509;
unsigned certix = 1;
KEYS: Overhaul key identification when searching for asymmetric keys Make use of the new match string preparsing to overhaul key identification when searching for asymmetric keys. The following changes are made: (1) Use the previously created asymmetric_key_id struct to hold the following key IDs derived from the X.509 certificate or PKCS#7 message: id: serial number + issuer skid: subjKeyId + subject authority: authKeyId + issuer (2) Replace the hex fingerprint attached to key->type_data[1] with an asymmetric_key_ids struct containing the id and the skid (if present). (3) Make the asymmetric_type match data preparse select one of two searches: (a) An iterative search for the key ID given if prefixed with "id:". The prefix is expected to be followed by a hex string giving the ID to search for. The criterion key ID is checked against all key IDs recorded on the key. (b) A direct search if the key ID is not prefixed with "id:". This will look for an exact match on the key description. (4) Make x509_request_asymmetric_key() take a key ID. This is then converted into "id:<hex>" and passed into keyring_search() where match preparsing will turn it back into a binary ID. (5) X.509 certificate verification then takes the authority key ID and looks up a key that matches it to find the public key for the certificate signature. (6) PKCS#7 certificate verification then takes the id key ID and looks up a key that matches it to find the public key for the signed information block signature. Additional changes: (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the cert to be rejected with -EBADMSG. (2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP public key fingerprints. If PGP is supported in future, this should generate a key ID that carries the fingerprint. (3) Th ca_keyid= kernel command line option is now converted to a key ID and used to match the authority key ID. Possibly this should only match the actual authKeyId part and not the issuer as well. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-17 00:36:13 +08:00
kenter("%u", sinfo->index);
for (x509 = pkcs7->certs; x509; x509 = x509->next, certix++) {
/* I'm _assuming_ that the generator of the PKCS#7 message will
* encode the fields from the X.509 cert in the same way in the
* PKCS#7 message - but I can't be 100% sure of that. It's
* possible this will need element-by-element comparison.
*/
KEYS: Overhaul key identification when searching for asymmetric keys Make use of the new match string preparsing to overhaul key identification when searching for asymmetric keys. The following changes are made: (1) Use the previously created asymmetric_key_id struct to hold the following key IDs derived from the X.509 certificate or PKCS#7 message: id: serial number + issuer skid: subjKeyId + subject authority: authKeyId + issuer (2) Replace the hex fingerprint attached to key->type_data[1] with an asymmetric_key_ids struct containing the id and the skid (if present). (3) Make the asymmetric_type match data preparse select one of two searches: (a) An iterative search for the key ID given if prefixed with "id:". The prefix is expected to be followed by a hex string giving the ID to search for. The criterion key ID is checked against all key IDs recorded on the key. (b) A direct search if the key ID is not prefixed with "id:". This will look for an exact match on the key description. (4) Make x509_request_asymmetric_key() take a key ID. This is then converted into "id:<hex>" and passed into keyring_search() where match preparsing will turn it back into a binary ID. (5) X.509 certificate verification then takes the authority key ID and looks up a key that matches it to find the public key for the certificate signature. (6) PKCS#7 certificate verification then takes the id key ID and looks up a key that matches it to find the public key for the signed information block signature. Additional changes: (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the cert to be rejected with -EBADMSG. (2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP public key fingerprints. If PGP is supported in future, this should generate a key ID that carries the fingerprint. (3) Th ca_keyid= kernel command line option is now converted to a key ID and used to match the authority key ID. Possibly this should only match the actual authKeyId part and not the issuer as well. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-17 00:36:13 +08:00
if (!asymmetric_key_id_same(x509->id, sinfo->signing_cert_id))
continue;
pr_devel("Sig %u: Found cert serial match X.509[%u]\n",
sinfo->index, certix);
if (x509->pub->pkey_algo != sinfo->sig.pkey_algo) {
pr_warn("Sig %u: X.509 algo and PKCS#7 sig algo don't match\n",
sinfo->index);
continue;
}
sinfo->signer = x509;
return 0;
}
KEYS: Overhaul key identification when searching for asymmetric keys Make use of the new match string preparsing to overhaul key identification when searching for asymmetric keys. The following changes are made: (1) Use the previously created asymmetric_key_id struct to hold the following key IDs derived from the X.509 certificate or PKCS#7 message: id: serial number + issuer skid: subjKeyId + subject authority: authKeyId + issuer (2) Replace the hex fingerprint attached to key->type_data[1] with an asymmetric_key_ids struct containing the id and the skid (if present). (3) Make the asymmetric_type match data preparse select one of two searches: (a) An iterative search for the key ID given if prefixed with "id:". The prefix is expected to be followed by a hex string giving the ID to search for. The criterion key ID is checked against all key IDs recorded on the key. (b) A direct search if the key ID is not prefixed with "id:". This will look for an exact match on the key description. (4) Make x509_request_asymmetric_key() take a key ID. This is then converted into "id:<hex>" and passed into keyring_search() where match preparsing will turn it back into a binary ID. (5) X.509 certificate verification then takes the authority key ID and looks up a key that matches it to find the public key for the certificate signature. (6) PKCS#7 certificate verification then takes the id key ID and looks up a key that matches it to find the public key for the signed information block signature. Additional changes: (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the cert to be rejected with -EBADMSG. (2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP public key fingerprints. If PGP is supported in future, this should generate a key ID that carries the fingerprint. (3) Th ca_keyid= kernel command line option is now converted to a key ID and used to match the authority key ID. Possibly this should only match the actual authKeyId part and not the issuer as well. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-17 00:36:13 +08:00
/* The relevant X.509 cert isn't found here, but it might be found in
* the trust keyring.
*/
pr_debug("Sig %u: Issuing X.509 cert not found (#%*phN)\n",
sinfo->index,
sinfo->signing_cert_id->len, sinfo->signing_cert_id->data);
return 0;
}
/*
* Verify the internal certificate chain as best we can.
*/
static int pkcs7_verify_sig_chain(struct pkcs7_message *pkcs7,
struct pkcs7_signed_info *sinfo)
{
struct x509_certificate *x509 = sinfo->signer, *p;
int ret;
kenter("");
for (p = pkcs7->certs; p; p = p->next)
p->seen = false;
for (;;) {
KEYS: Overhaul key identification when searching for asymmetric keys Make use of the new match string preparsing to overhaul key identification when searching for asymmetric keys. The following changes are made: (1) Use the previously created asymmetric_key_id struct to hold the following key IDs derived from the X.509 certificate or PKCS#7 message: id: serial number + issuer skid: subjKeyId + subject authority: authKeyId + issuer (2) Replace the hex fingerprint attached to key->type_data[1] with an asymmetric_key_ids struct containing the id and the skid (if present). (3) Make the asymmetric_type match data preparse select one of two searches: (a) An iterative search for the key ID given if prefixed with "id:". The prefix is expected to be followed by a hex string giving the ID to search for. The criterion key ID is checked against all key IDs recorded on the key. (b) A direct search if the key ID is not prefixed with "id:". This will look for an exact match on the key description. (4) Make x509_request_asymmetric_key() take a key ID. This is then converted into "id:<hex>" and passed into keyring_search() where match preparsing will turn it back into a binary ID. (5) X.509 certificate verification then takes the authority key ID and looks up a key that matches it to find the public key for the certificate signature. (6) PKCS#7 certificate verification then takes the id key ID and looks up a key that matches it to find the public key for the signed information block signature. Additional changes: (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the cert to be rejected with -EBADMSG. (2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP public key fingerprints. If PGP is supported in future, this should generate a key ID that carries the fingerprint. (3) Th ca_keyid= kernel command line option is now converted to a key ID and used to match the authority key ID. Possibly this should only match the actual authKeyId part and not the issuer as well. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-17 00:36:13 +08:00
pr_debug("verify %s: %*phN\n",
x509->subject,
x509->raw_serial_size, x509->raw_serial);
x509->seen = true;
ret = x509_get_sig_params(x509);
if (ret < 0)
goto maybe_missing_crypto_in_x509;
pr_debug("- issuer %s\n", x509->issuer);
if (x509->authority)
KEYS: Overhaul key identification when searching for asymmetric keys Make use of the new match string preparsing to overhaul key identification when searching for asymmetric keys. The following changes are made: (1) Use the previously created asymmetric_key_id struct to hold the following key IDs derived from the X.509 certificate or PKCS#7 message: id: serial number + issuer skid: subjKeyId + subject authority: authKeyId + issuer (2) Replace the hex fingerprint attached to key->type_data[1] with an asymmetric_key_ids struct containing the id and the skid (if present). (3) Make the asymmetric_type match data preparse select one of two searches: (a) An iterative search for the key ID given if prefixed with "id:". The prefix is expected to be followed by a hex string giving the ID to search for. The criterion key ID is checked against all key IDs recorded on the key. (b) A direct search if the key ID is not prefixed with "id:". This will look for an exact match on the key description. (4) Make x509_request_asymmetric_key() take a key ID. This is then converted into "id:<hex>" and passed into keyring_search() where match preparsing will turn it back into a binary ID. (5) X.509 certificate verification then takes the authority key ID and looks up a key that matches it to find the public key for the certificate signature. (6) PKCS#7 certificate verification then takes the id key ID and looks up a key that matches it to find the public key for the signed information block signature. Additional changes: (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the cert to be rejected with -EBADMSG. (2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP public key fingerprints. If PGP is supported in future, this should generate a key ID that carries the fingerprint. (3) Th ca_keyid= kernel command line option is now converted to a key ID and used to match the authority key ID. Possibly this should only match the actual authKeyId part and not the issuer as well. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-17 00:36:13 +08:00
pr_debug("- authkeyid %*phN\n",
x509->authority->len, x509->authority->data);
if (!x509->authority ||
strcmp(x509->subject, x509->issuer) == 0) {
/* If there's no authority certificate specified, then
* the certificate must be self-signed and is the root
* of the chain. Likewise if the cert is its own
* authority.
*/
pr_debug("- no auth?\n");
if (x509->raw_subject_size != x509->raw_issuer_size ||
memcmp(x509->raw_subject, x509->raw_issuer,
x509->raw_issuer_size) != 0)
return 0;
ret = x509_check_signature(x509->pub, x509);
if (ret < 0)
goto maybe_missing_crypto_in_x509;
x509->signer = x509;
pr_debug("- self-signed\n");
return 0;
}
/* Look through the X.509 certificates in the PKCS#7 message's
* list to see if the next one is there.
*/
KEYS: Overhaul key identification when searching for asymmetric keys Make use of the new match string preparsing to overhaul key identification when searching for asymmetric keys. The following changes are made: (1) Use the previously created asymmetric_key_id struct to hold the following key IDs derived from the X.509 certificate or PKCS#7 message: id: serial number + issuer skid: subjKeyId + subject authority: authKeyId + issuer (2) Replace the hex fingerprint attached to key->type_data[1] with an asymmetric_key_ids struct containing the id and the skid (if present). (3) Make the asymmetric_type match data preparse select one of two searches: (a) An iterative search for the key ID given if prefixed with "id:". The prefix is expected to be followed by a hex string giving the ID to search for. The criterion key ID is checked against all key IDs recorded on the key. (b) A direct search if the key ID is not prefixed with "id:". This will look for an exact match on the key description. (4) Make x509_request_asymmetric_key() take a key ID. This is then converted into "id:<hex>" and passed into keyring_search() where match preparsing will turn it back into a binary ID. (5) X.509 certificate verification then takes the authority key ID and looks up a key that matches it to find the public key for the certificate signature. (6) PKCS#7 certificate verification then takes the id key ID and looks up a key that matches it to find the public key for the signed information block signature. Additional changes: (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the cert to be rejected with -EBADMSG. (2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP public key fingerprints. If PGP is supported in future, this should generate a key ID that carries the fingerprint. (3) Th ca_keyid= kernel command line option is now converted to a key ID and used to match the authority key ID. Possibly this should only match the actual authKeyId part and not the issuer as well. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-17 00:36:13 +08:00
pr_debug("- want %*phN\n",
x509->authority->len, x509->authority->data);
for (p = pkcs7->certs; p; p = p->next) {
KEYS: Overhaul key identification when searching for asymmetric keys Make use of the new match string preparsing to overhaul key identification when searching for asymmetric keys. The following changes are made: (1) Use the previously created asymmetric_key_id struct to hold the following key IDs derived from the X.509 certificate or PKCS#7 message: id: serial number + issuer skid: subjKeyId + subject authority: authKeyId + issuer (2) Replace the hex fingerprint attached to key->type_data[1] with an asymmetric_key_ids struct containing the id and the skid (if present). (3) Make the asymmetric_type match data preparse select one of two searches: (a) An iterative search for the key ID given if prefixed with "id:". The prefix is expected to be followed by a hex string giving the ID to search for. The criterion key ID is checked against all key IDs recorded on the key. (b) A direct search if the key ID is not prefixed with "id:". This will look for an exact match on the key description. (4) Make x509_request_asymmetric_key() take a key ID. This is then converted into "id:<hex>" and passed into keyring_search() where match preparsing will turn it back into a binary ID. (5) X.509 certificate verification then takes the authority key ID and looks up a key that matches it to find the public key for the certificate signature. (6) PKCS#7 certificate verification then takes the id key ID and looks up a key that matches it to find the public key for the signed information block signature. Additional changes: (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the cert to be rejected with -EBADMSG. (2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP public key fingerprints. If PGP is supported in future, this should generate a key ID that carries the fingerprint. (3) Th ca_keyid= kernel command line option is now converted to a key ID and used to match the authority key ID. Possibly this should only match the actual authKeyId part and not the issuer as well. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-17 00:36:13 +08:00
if (!p->skid)
continue;
pr_debug("- cmp [%u] %*phN\n",
p->index, p->skid->len, p->skid->data);
if (asymmetric_key_id_same(p->skid, x509->authority))
goto found_issuer;
}
/* We didn't find the root of this chain */
pr_debug("- top\n");
return 0;
found_issuer:
KEYS: Overhaul key identification when searching for asymmetric keys Make use of the new match string preparsing to overhaul key identification when searching for asymmetric keys. The following changes are made: (1) Use the previously created asymmetric_key_id struct to hold the following key IDs derived from the X.509 certificate or PKCS#7 message: id: serial number + issuer skid: subjKeyId + subject authority: authKeyId + issuer (2) Replace the hex fingerprint attached to key->type_data[1] with an asymmetric_key_ids struct containing the id and the skid (if present). (3) Make the asymmetric_type match data preparse select one of two searches: (a) An iterative search for the key ID given if prefixed with "id:". The prefix is expected to be followed by a hex string giving the ID to search for. The criterion key ID is checked against all key IDs recorded on the key. (b) A direct search if the key ID is not prefixed with "id:". This will look for an exact match on the key description. (4) Make x509_request_asymmetric_key() take a key ID. This is then converted into "id:<hex>" and passed into keyring_search() where match preparsing will turn it back into a binary ID. (5) X.509 certificate verification then takes the authority key ID and looks up a key that matches it to find the public key for the certificate signature. (6) PKCS#7 certificate verification then takes the id key ID and looks up a key that matches it to find the public key for the signed information block signature. Additional changes: (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the cert to be rejected with -EBADMSG. (2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP public key fingerprints. If PGP is supported in future, this should generate a key ID that carries the fingerprint. (3) Th ca_keyid= kernel command line option is now converted to a key ID and used to match the authority key ID. Possibly this should only match the actual authKeyId part and not the issuer as well. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-17 00:36:13 +08:00
pr_debug("- subject %s\n", p->subject);
if (p->seen) {
pr_warn("Sig %u: X.509 chain contains loop\n",
sinfo->index);
return 0;
}
ret = x509_check_signature(p->pub, x509);
if (ret < 0)
return ret;
x509->signer = p;
if (x509 == p) {
pr_debug("- self-signed\n");
return 0;
}
x509 = p;
might_sleep();
}
maybe_missing_crypto_in_x509:
/* Just prune the certificate chain at this point if we lack some
* crypto module to go further. Note, however, we don't want to set
* sinfo->missing_crypto as the signed info block may still be
* validatable against an X.509 cert lower in the chain that we have a
* trusted copy of.
*/
if (ret == -ENOPKG)
return 0;
return ret;
}
/*
* Verify one signed information block from a PKCS#7 message.
*/
static int pkcs7_verify_one(struct pkcs7_message *pkcs7,
struct pkcs7_signed_info *sinfo)
{
int ret;
kenter(",%u", sinfo->index);
/* First of all, digest the data in the PKCS#7 message and the
* signed information block
*/
ret = pkcs7_digest(pkcs7, sinfo);
if (ret < 0)
return ret;
/* Find the key for the signature if there is one */
ret = pkcs7_find_key(pkcs7, sinfo);
if (ret < 0)
return ret;
if (!sinfo->signer)
return 0;
pr_devel("Using X.509[%u] for sig %u\n",
sinfo->signer->index, sinfo->index);
/* Verify the PKCS#7 binary against the key */
ret = public_key_verify_signature(sinfo->signer->pub, &sinfo->sig);
if (ret < 0)
return ret;
pr_devel("Verified signature %u\n", sinfo->index);
/* Verify the internal certificate chain */
return pkcs7_verify_sig_chain(pkcs7, sinfo);
}
/**
* pkcs7_verify - Verify a PKCS#7 message
* @pkcs7: The PKCS#7 message to be verified
*
* Verify a PKCS#7 message is internally consistent - that is, the data digest
* matches the digest in the AuthAttrs and any signature in the message or one
* of the X.509 certificates it carries that matches another X.509 cert in the
* message can be verified.
*
* This does not look to match the contents of the PKCS#7 message against any
* external public keys.
*
* Returns, in order of descending priority:
*
* (*) -EKEYREJECTED if a signature failed to match for which we found an
* appropriate X.509 certificate, or:
*
* (*) -EBADMSG if some part of the message was invalid, or:
*
* (*) -ENOPKG if none of the signature chains are verifiable because suitable
* crypto modules couldn't be found, or:
*
* (*) 0 if all the signature chains that don't incur -ENOPKG can be verified
* (note that a signature chain may be of zero length), or:
*/
int pkcs7_verify(struct pkcs7_message *pkcs7)
{
struct pkcs7_signed_info *sinfo;
struct x509_certificate *x509;
int enopkg = -ENOPKG;
int ret, n;
kenter("");
for (n = 0, x509 = pkcs7->certs; x509; x509 = x509->next, n++) {
ret = x509_get_sig_params(x509);
if (ret < 0)
return ret;
KEYS: Overhaul key identification when searching for asymmetric keys Make use of the new match string preparsing to overhaul key identification when searching for asymmetric keys. The following changes are made: (1) Use the previously created asymmetric_key_id struct to hold the following key IDs derived from the X.509 certificate or PKCS#7 message: id: serial number + issuer skid: subjKeyId + subject authority: authKeyId + issuer (2) Replace the hex fingerprint attached to key->type_data[1] with an asymmetric_key_ids struct containing the id and the skid (if present). (3) Make the asymmetric_type match data preparse select one of two searches: (a) An iterative search for the key ID given if prefixed with "id:". The prefix is expected to be followed by a hex string giving the ID to search for. The criterion key ID is checked against all key IDs recorded on the key. (b) A direct search if the key ID is not prefixed with "id:". This will look for an exact match on the key description. (4) Make x509_request_asymmetric_key() take a key ID. This is then converted into "id:<hex>" and passed into keyring_search() where match preparsing will turn it back into a binary ID. (5) X.509 certificate verification then takes the authority key ID and looks up a key that matches it to find the public key for the certificate signature. (6) PKCS#7 certificate verification then takes the id key ID and looks up a key that matches it to find the public key for the signed information block signature. Additional changes: (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the cert to be rejected with -EBADMSG. (2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP public key fingerprints. If PGP is supported in future, this should generate a key ID that carries the fingerprint. (3) Th ca_keyid= kernel command line option is now converted to a key ID and used to match the authority key ID. Possibly this should only match the actual authKeyId part and not the issuer as well. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-17 00:36:13 +08:00
pr_debug("X.509[%u] %*phN\n",
n, x509->authority->len, x509->authority->data);
}
for (sinfo = pkcs7->signed_infos; sinfo; sinfo = sinfo->next) {
ret = pkcs7_verify_one(pkcs7, sinfo);
if (ret < 0) {
if (ret == -ENOPKG) {
sinfo->unsupported_crypto = true;
continue;
}
kleave(" = %d", ret);
return ret;
}
enopkg = 0;
}
kleave(" = %d", enopkg);
return enopkg;
}
EXPORT_SYMBOL_GPL(pkcs7_verify);