linux_old1/include/linux/acpi.h

234 lines
6.0 KiB
C
Raw Normal View History

/*
* acpi.h - ACPI Interface
*
* Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#ifndef _LINUX_ACPI_H
#define _LINUX_ACPI_H
#ifdef CONFIG_ACPI
#ifndef _LINUX
#define _LINUX
#endif
#include <linux/list.h>
#include <linux/mod_devicetable.h>
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_numa.h>
#include <asm/acpi.h>
#include <linux/dmi.h>
#ifdef CONFIG_ACPI
enum acpi_irq_model_id {
ACPI_IRQ_MODEL_PIC = 0,
ACPI_IRQ_MODEL_IOAPIC,
ACPI_IRQ_MODEL_IOSAPIC,
ACPI_IRQ_MODEL_PLATFORM,
ACPI_IRQ_MODEL_COUNT
};
extern enum acpi_irq_model_id acpi_irq_model;
enum acpi_interrupt_id {
ACPI_INTERRUPT_PMI = 1,
ACPI_INTERRUPT_INIT,
ACPI_INTERRUPT_CPEI,
ACPI_INTERRUPT_COUNT
};
#define ACPI_SPACE_MEM 0
enum acpi_address_range_id {
ACPI_ADDRESS_RANGE_MEMORY = 1,
ACPI_ADDRESS_RANGE_RESERVED = 2,
ACPI_ADDRESS_RANGE_ACPI = 3,
ACPI_ADDRESS_RANGE_NVS = 4,
ACPI_ADDRESS_RANGE_COUNT
};
/* Table Handlers */
typedef int (*acpi_table_handler) (struct acpi_table_header *table);
typedef int (*acpi_table_entry_handler) (struct acpi_subtable_header *header, const unsigned long end);
char * __acpi_map_table (unsigned long phys_addr, unsigned long size);
unsigned long acpi_find_rsdp (void);
int acpi_boot_init (void);
int acpi_boot_table_init (void);
int acpi_numa_init (void);
int acpi_table_init (void);
int acpi_table_parse (char *id, acpi_table_handler handler);
int __init acpi_table_parse_entries(char *id, unsigned long table_size,
int entry_id, acpi_table_entry_handler handler, unsigned int max_entries);
int acpi_table_parse_madt (enum acpi_madt_type id, acpi_table_entry_handler handler, unsigned int max_entries);
int acpi_parse_mcfg (struct acpi_table_header *header);
void acpi_table_print_madt_entry (struct acpi_subtable_header *madt);
/* the following four functions are architecture-dependent */
#ifdef CONFIG_HAVE_ARCH_PARSE_SRAT
#define NR_NODE_MEMBLKS MAX_NUMNODES
#define acpi_numa_slit_init(slit) do {} while (0)
#define acpi_numa_processor_affinity_init(pa) do {} while (0)
#define acpi_numa_memory_affinity_init(ma) do {} while (0)
#define acpi_numa_arch_fixup() do {} while (0)
#else
void acpi_numa_slit_init (struct acpi_table_slit *slit);
void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa);
void acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
void acpi_numa_arch_fixup(void);
#endif
#ifdef CONFIG_ACPI_HOTPLUG_CPU
/* Arch dependent functions for cpu hotplug support */
int acpi_map_lsapic(acpi_handle handle, int *pcpu);
int acpi_unmap_lsapic(int cpu);
#endif /* CONFIG_ACPI_HOTPLUG_CPU */
int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base);
int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base);
extern int acpi_mp_config;
extern struct acpi_mcfg_allocation *pci_mmcfg_config;
extern int pci_mmcfg_config_num;
extern int sbf_port;
extern unsigned long acpi_realmode_flags;
#else /* !CONFIG_ACPI */
#define acpi_mp_config 0
#endif /* !CONFIG_ACPI */
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-10-01 07:03:00 +08:00
int acpi_register_gsi (u32 gsi, int triggering, int polarity);
int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
#ifdef CONFIG_X86_IO_APIC
extern int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity);
#else
#define acpi_get_override_irq(bus, trigger, polarity) (-1)
#endif
/*
* This function undoes the effect of one call to acpi_register_gsi().
* If this matches the last registration, any IRQ resources for gsi
* are freed.
*/
void acpi_unregister_gsi (u32 gsi);
#ifdef CONFIG_ACPI
struct acpi_prt_entry {
struct list_head node;
struct acpi_pci_id id;
u8 pin;
struct {
acpi_handle handle;
u32 index;
} link;
u32 irq;
};
struct acpi_prt_list {
int count;
struct list_head entries;
};
struct pci_dev;
int acpi_pci_irq_enable (struct pci_dev *dev);
void acpi_penalize_isa_irq(int irq, int active);
void acpi_pci_irq_disable (struct pci_dev *dev);
struct acpi_pci_driver {
struct acpi_pci_driver *next;
int (*add)(acpi_handle handle);
void (*remove)(acpi_handle handle);
};
int acpi_pci_register_driver(struct acpi_pci_driver *driver);
void acpi_pci_unregister_driver(struct acpi_pci_driver *driver);
#endif /* CONFIG_ACPI */
#ifdef CONFIG_ACPI_EC
extern int ec_read(u8 addr, u8 *val);
extern int ec_write(u8 addr, u8 val);
extern int ec_transaction(u8 command,
const u8 *wdata, unsigned wdata_len,
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 20:16:19 +08:00
u8 *rdata, unsigned rdata_len,
int force_poll);
#endif /*CONFIG_ACPI_EC*/
extern int acpi_blacklisted(void);
#ifdef CONFIG_DMI
extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d);
#endif
#ifdef CONFIG_ACPI_NUMA
int acpi_get_pxm(acpi_handle handle);
int acpi_get_node(acpi_handle *handle);
#else
static inline int acpi_get_pxm(acpi_handle handle)
{
return 0;
}
static inline int acpi_get_node(acpi_handle *handle)
{
return 0;
}
#endif
extern int acpi_paddr_to_node(u64 start_addr, u64 size);
extern int pnpacpi_disabled;
#define PXM_INVAL (-1)
#define NID_INVAL (-1)
#else /* CONFIG_ACPI */
static inline int acpi_boot_init(void)
{
return 0;
}
static inline int acpi_boot_table_init(void)
{
return 0;
}
#endif /* !CONFIG_ACPI */
#endif /*_LINUX_ACPI_H*/