linux_old1/drivers/bcma/scan.c

508 lines
13 KiB
C
Raw Normal View History

bcma: add Broadcom specific AMBA bus driver Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10 00:56:46 +08:00
/*
* Broadcom specific AMBA
* Bus scanning
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
#include "scan.h"
#include "bcma_private.h"
#include <linux/bcma/bcma.h>
#include <linux/bcma/bcma_regs.h>
#include <linux/pci.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
struct bcma_device_id_name {
u16 id;
const char *name;
};
struct bcma_device_id_name bcma_device_names[] = {
{ BCMA_CORE_OOB_ROUTER, "OOB Router" },
{ BCMA_CORE_INVALID, "Invalid" },
{ BCMA_CORE_CHIPCOMMON, "ChipCommon" },
{ BCMA_CORE_ILINE20, "ILine 20" },
{ BCMA_CORE_SRAM, "SRAM" },
{ BCMA_CORE_SDRAM, "SDRAM" },
{ BCMA_CORE_PCI, "PCI" },
{ BCMA_CORE_MIPS, "MIPS" },
{ BCMA_CORE_ETHERNET, "Fast Ethernet" },
{ BCMA_CORE_V90, "V90" },
{ BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" },
{ BCMA_CORE_ADSL, "ADSL" },
{ BCMA_CORE_ILINE100, "ILine 100" },
{ BCMA_CORE_IPSEC, "IPSEC" },
{ BCMA_CORE_UTOPIA, "UTOPIA" },
{ BCMA_CORE_PCMCIA, "PCMCIA" },
{ BCMA_CORE_INTERNAL_MEM, "Internal Memory" },
{ BCMA_CORE_MEMC_SDRAM, "MEMC SDRAM" },
{ BCMA_CORE_OFDM, "OFDM" },
{ BCMA_CORE_EXTIF, "EXTIF" },
{ BCMA_CORE_80211, "IEEE 802.11" },
{ BCMA_CORE_PHY_A, "PHY A" },
{ BCMA_CORE_PHY_B, "PHY B" },
{ BCMA_CORE_PHY_G, "PHY G" },
{ BCMA_CORE_MIPS_3302, "MIPS 3302" },
{ BCMA_CORE_USB11_HOST, "USB 1.1 Host" },
{ BCMA_CORE_USB11_DEV, "USB 1.1 Device" },
{ BCMA_CORE_USB20_HOST, "USB 2.0 Host" },
{ BCMA_CORE_USB20_DEV, "USB 2.0 Device" },
{ BCMA_CORE_SDIO_HOST, "SDIO Host" },
{ BCMA_CORE_ROBOSWITCH, "Roboswitch" },
{ BCMA_CORE_PARA_ATA, "PATA" },
{ BCMA_CORE_SATA_XORDMA, "SATA XOR-DMA" },
{ BCMA_CORE_ETHERNET_GBIT, "GBit Ethernet" },
{ BCMA_CORE_PCIE, "PCIe" },
{ BCMA_CORE_PHY_N, "PHY N" },
{ BCMA_CORE_SRAM_CTL, "SRAM Controller" },
{ BCMA_CORE_MINI_MACPHY, "Mini MACPHY" },
{ BCMA_CORE_ARM_1176, "ARM 1176" },
{ BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" },
{ BCMA_CORE_PHY_LP, "PHY LP" },
{ BCMA_CORE_PMU, "PMU" },
{ BCMA_CORE_PHY_SSN, "PHY SSN" },
{ BCMA_CORE_SDIO_DEV, "SDIO Device" },
{ BCMA_CORE_ARM_CM3, "ARM CM3" },
{ BCMA_CORE_PHY_HT, "PHY HT" },
{ BCMA_CORE_MIPS_74K, "MIPS 74K" },
{ BCMA_CORE_MAC_GBIT, "GBit MAC" },
{ BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
{ BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
{ BCMA_CORE_OCP_OCP_BRIDGE, "OCP to OCP Bridge" },
{ BCMA_CORE_SHARED_COMMON, "Common Shared" },
{ BCMA_CORE_OCP_AHB_BRIDGE, "OCP to AHB Bridge" },
{ BCMA_CORE_SPI_HOST, "SPI Host" },
{ BCMA_CORE_I2S, "I2S" },
{ BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
{ BCMA_CORE_SHIM, "SHIM" },
{ BCMA_CORE_DEFAULT, "Default" },
};
const char *bcma_device_name(struct bcma_device_id *id)
{
int i;
if (id->manuf == BCMA_MANUF_BCM) {
for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) {
if (bcma_device_names[i].id == id->id)
return bcma_device_names[i].name;
}
}
return "UNKNOWN";
}
static u32 bcma_scan_read32(struct bcma_bus *bus, u8 current_coreidx,
u16 offset)
{
return readl(bus->mmio + offset);
}
static void bcma_scan_switch_core(struct bcma_bus *bus, u32 addr)
{
if (bus->hosttype == BCMA_HOSTTYPE_PCI)
pci_write_config_dword(bus->host_pci, BCMA_PCI_BAR0_WIN,
addr);
}
static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
{
u32 ent = readl(*eromptr);
(*eromptr)++;
return ent;
}
static void bcma_erom_push_ent(u32 **eromptr)
{
(*eromptr)--;
}
static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
{
u32 ent = bcma_erom_get_ent(bus, eromptr);
if (!(ent & SCAN_ER_VALID))
return -ENOENT;
if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_CI)
return -ENOENT;
return ent;
}
static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
{
u32 ent = bcma_erom_get_ent(bus, eromptr);
bcma_erom_push_ent(eromptr);
return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
}
static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
{
u32 ent = bcma_erom_get_ent(bus, eromptr);
bcma_erom_push_ent(eromptr);
return (((ent & SCAN_ER_VALID)) &&
((ent & SCAN_ER_TAGX) == SCAN_ER_TAG_ADDR) &&
((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
}
static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
{
u32 ent;
while (1) {
ent = bcma_erom_get_ent(bus, eromptr);
if ((ent & SCAN_ER_VALID) &&
((ent & SCAN_ER_TAG) == SCAN_ER_TAG_CI))
break;
if (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID))
break;
}
bcma_erom_push_ent(eromptr);
}
static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
{
u32 ent = bcma_erom_get_ent(bus, eromptr);
if (!(ent & SCAN_ER_VALID))
return -ENOENT;
if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_MP)
return -ENOENT;
return ent;
}
static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
u32 type, u8 port)
{
u32 addrl, addrh, sizel, sizeh = 0;
u32 size;
u32 ent = bcma_erom_get_ent(bus, eromptr);
if ((!(ent & SCAN_ER_VALID)) ||
((ent & SCAN_ER_TAGX) != SCAN_ER_TAG_ADDR) ||
((ent & SCAN_ADDR_TYPE) != type) ||
(((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) {
bcma_erom_push_ent(eromptr);
return -EINVAL;
}
addrl = ent & SCAN_ADDR_ADDR;
if (ent & SCAN_ADDR_AG32)
addrh = bcma_erom_get_ent(bus, eromptr);
else
addrh = 0;
if ((ent & SCAN_ADDR_SZ) == SCAN_ADDR_SZ_SZD) {
size = bcma_erom_get_ent(bus, eromptr);
sizel = size & SCAN_SIZE_SZ;
if (size & SCAN_SIZE_SG32)
sizeh = bcma_erom_get_ent(bus, eromptr);
} else
sizel = SCAN_ADDR_SZ_BASE <<
((ent & SCAN_ADDR_SZ) >> SCAN_ADDR_SZ_SHIFT);
return addrl;
}
static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus,
u16 index)
{
struct bcma_device *core;
list_for_each_entry(core, &bus->cores, list) {
if (core->core_index == index)
return core;
}
return NULL;
}
static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid)
{
struct bcma_device *core;
list_for_each_entry_reverse(core, &bus->cores, list) {
if (core->id.id == coreid)
return core;
}
return NULL;
}
static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
struct bcma_device_id *match, int core_num,
struct bcma_device *core)
{
s32 tmp;
u8 i, j;
s32 cia, cib;
u8 ports[2], wrappers[2];
/* get CIs */
cia = bcma_erom_get_ci(bus, eromptr);
if (cia < 0) {
bcma_erom_push_ent(eromptr);
if (bcma_erom_is_end(bus, eromptr))
return -ESPIPE;
return -EILSEQ;
}
cib = bcma_erom_get_ci(bus, eromptr);
if (cib < 0)
return -EILSEQ;
/* parse CIs */
core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
if (((core->id.manuf == BCMA_MANUF_ARM) &&
(core->id.id == 0xFFF)) ||
(ports[1] == 0)) {
bcma_erom_skip_component(bus, eromptr);
return -ENXIO;
}
/* check if component is a core at all */
if (wrappers[0] + wrappers[1] == 0) {
/* we could save addrl of the router
if (cid == BCMA_CORE_OOB_ROUTER)
*/
bcma_erom_skip_component(bus, eromptr);
return -ENXIO;
}
if (bcma_erom_is_bridge(bus, eromptr)) {
bcma_erom_skip_component(bus, eromptr);
return -ENXIO;
}
if (bcma_find_core_by_index(bus, core_num)) {
bcma_erom_skip_component(bus, eromptr);
return -ENODEV;
}
if (match && ((match->manuf != BCMA_ANY_MANUF &&
match->manuf != core->id.manuf) ||
(match->id != BCMA_ANY_ID && match->id != core->id.id) ||
(match->rev != BCMA_ANY_REV && match->rev != core->id.rev) ||
(match->class != BCMA_ANY_CLASS && match->class != core->id.class)
)) {
bcma_erom_skip_component(bus, eromptr);
return -ENODEV;
}
/* get & parse master ports */
for (i = 0; i < ports[0]; i++) {
s32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr);
if (mst_port_d < 0)
return -EILSEQ;
}
/* get & parse slave ports */
for (i = 0; i < ports[1]; i++) {
for (j = 0; ; j++) {
tmp = bcma_erom_get_addr_desc(bus, eromptr,
SCAN_ADDR_TYPE_SLAVE, i);
if (tmp < 0) {
/* no more entries for port _i_ */
/* pr_debug("erom: slave port %d "
* "has %d descriptors\n", i, j); */
break;
} else {
if (i == 0 && j == 0)
core->addr = tmp;
}
}
}
/* get & parse master wrappers */
for (i = 0; i < wrappers[0]; i++) {
for (j = 0; ; j++) {
tmp = bcma_erom_get_addr_desc(bus, eromptr,
SCAN_ADDR_TYPE_MWRAP, i);
if (tmp < 0) {
/* no more entries for port _i_ */
/* pr_debug("erom: master wrapper %d "
* "has %d descriptors\n", i, j); */
break;
} else {
if (i == 0 && j == 0)
core->wrap = tmp;
}
}
}
/* get & parse slave wrappers */
for (i = 0; i < wrappers[1]; i++) {
u8 hack = (ports[1] == 1) ? 0 : 1;
for (j = 0; ; j++) {
tmp = bcma_erom_get_addr_desc(bus, eromptr,
SCAN_ADDR_TYPE_SWRAP, i + hack);
if (tmp < 0) {
/* no more entries for port _i_ */
/* pr_debug("erom: master wrapper %d "
* has %d descriptors\n", i, j); */
break;
} else {
if (wrappers[0] == 0 && !i && !j)
core->wrap = tmp;
}
}
}
if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE);
if (!core->io_addr)
return -ENOMEM;
core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE);
if (!core->io_wrap) {
iounmap(core->io_addr);
return -ENOMEM;
}
}
return 0;
}
void bcma_init_bus(struct bcma_bus *bus)
bcma: add Broadcom specific AMBA bus driver Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10 00:56:46 +08:00
{
s32 tmp;
struct bcma_chipinfo *chipinfo = &(bus->chipinfo);
bcma: add Broadcom specific AMBA bus driver Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10 00:56:46 +08:00
if (bus->init_done)
return;
bcma: add Broadcom specific AMBA bus driver Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10 00:56:46 +08:00
INIT_LIST_HEAD(&bus->cores);
bus->nr_cores = 0;
bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
chipinfo->id, chipinfo->rev, chipinfo->pkg);
bus->init_done = true;
}
int bcma_bus_scan(struct bcma_bus *bus)
{
u32 erombase;
u32 __iomem *eromptr, *eromend;
int err, core_num = 0;
bcma_init_bus(bus);
bcma: add Broadcom specific AMBA bus driver Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10 00:56:46 +08:00
erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
if (!eromptr)
return -ENOMEM;
} else {
eromptr = bus->mmio;
}
bcma: add Broadcom specific AMBA bus driver Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10 00:56:46 +08:00
eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
bcma_scan_switch_core(bus, erombase);
while (eromptr < eromend) {
struct bcma_device *other_core;
bcma: add Broadcom specific AMBA bus driver Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10 00:56:46 +08:00
struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL);
if (!core)
return -ENOMEM;
INIT_LIST_HEAD(&core->list);
core->bus = bus;
err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core);
if (err < 0) {
kfree(core);
if (err == -ENODEV) {
core_num++;
continue;
} else if (err == -ENXIO) {
continue;
} else if (err == -ESPIPE) {
break;
}
return err;
}
bcma: add Broadcom specific AMBA bus driver Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10 00:56:46 +08:00
core->core_index = core_num++;
bus->nr_cores++;
other_core = bcma_find_core_reverse(bus, core->id.id);
core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1;
bcma: add Broadcom specific AMBA bus driver Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10 00:56:46 +08:00
pr_info("Core %d found: %s "
"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
core->core_index, bcma_device_name(&core->id),
bcma: add Broadcom specific AMBA bus driver Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10 00:56:46 +08:00
core->id.manuf, core->id.id, core->id.rev,
core->id.class);
list_add(&core->list, &bus->cores);
}
if (bus->hosttype == BCMA_HOSTTYPE_SOC)
iounmap(eromptr);
bcma: add Broadcom specific AMBA bus driver Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10 00:56:46 +08:00
return 0;
}
int __init bcma_bus_scan_early(struct bcma_bus *bus,
struct bcma_device_id *match,
struct bcma_device *core)
{
u32 erombase;
u32 __iomem *eromptr, *eromend;
int err = -ENODEV;
int core_num = 0;
erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
if (!eromptr)
return -ENOMEM;
} else {
eromptr = bus->mmio;
}
eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
bcma_scan_switch_core(bus, erombase);
while (eromptr < eromend) {
memset(core, 0, sizeof(*core));
INIT_LIST_HEAD(&core->list);
core->bus = bus;
err = bcma_get_next_core(bus, &eromptr, match, core_num, core);
if (err == -ENODEV) {
core_num++;
continue;
} else if (err == -ENXIO)
continue;
else if (err == -ESPIPE)
break;
else if (err < 0)
return err;
core->core_index = core_num++;
bus->nr_cores++;
pr_info("Core %d found: %s "
"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
core->core_index, bcma_device_name(&core->id),
core->id.manuf, core->id.id, core->id.rev,
core->id.class);
list_add(&core->list, &bus->cores);
err = 0;
break;
}
if (bus->hosttype == BCMA_HOSTTYPE_SOC)
iounmap(eromptr);
return err;
}