linux_old1/arch/powerpc/kernel/pci_32.c

453 lines
11 KiB
C
Raw Normal View History

/*
* Common pmac/prep/chrp pci routines. -- Cort
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/capability.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/bootmem.h>
[PATCH] powerpc: fix trigger handling in the new irq code This patch slightly reworks the new irq code to fix a small design error. I removed the passing of the trigger to the map() calls entirely, it was not a good idea to have one call do two different things. It also fixes a couple of corner cases. Mapping a linux virtual irq to a physical irq now does only that. Setting the trigger is a different action which has a different call. The main changes are: - I no longer call host->ops->map() for an already mapped irq, I just return the virtual number that was already mapped. It was called before to give an opportunity to change the trigger, but that was causing issues as that could happen while the interrupt was in use by a device, and because of the trigger change, map would potentially muck around with things in a racy way. That was causing much burden on a given's controller implementation of map() to get it right. This is much simpler now. map() is only called on the initial mapping of an irq, meaning that you know that this irq is _not_ being used. You can initialize the hardware if you want (though you don't have to). - Controllers that can handle different type of triggers (level/edge/etc...) now implement the standard irq_chip->set_type() call as defined by the generic code. That means that you can use the standard set_irq_type() to configure an irq line manually if you wish or (though I don't like that interface), pass explicit trigger flags to request_irq() as defined by the generic kernel interfaces. Also, using those interfaces guarantees that your controller set_type callback is called with the descriptor lock held, thus providing locking against activity on the same interrupt (including mask/unmask/etc...) automatically. A result is that, for example, MPIC's own map() implementation calls irq_set_type(NONE) to configure the hardware to the default triggers. - To allow the above, the irq_map array entry for the new mapped interrupt is now set before map() callback is called for the controller. - The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function for mapping interrupts from the device-tree now also call the separate set_irq_type(), and only does so if there is a change in the trigger type. - While I was at it, I changed pci_read_irq_line() (which is the helper I would expect most archs to use in their pcibios_fixup() to get the PCI interrupt routing from the device tree) to also handle a fallback when the DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an interrupt number from the device. That number is then mapped using the default controller, and the trigger is set to level low. That default behaviour works for several platforms that don't have a proper interrupt tree like Pegasos. If it doesn't work for your platform, then either provide a proper interrupt tree from the firmware so that fallback isn't needed, or don't call pci_read_irq_line() - Add back a bit that got dropped by my main rework patch for properly clearing pending IPIs on pSeries when using a kexec Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 19:44:42 +08:00
#include <linux/irq.h>
#include <linux/list.h>
#include <linux/of.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/sections.h>
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
#include <asm/byteorder.h>
#include <asm/uaccess.h>
#include <asm/machdep.h>
#undef DEBUG
unsigned long isa_io_base = 0;
unsigned long pci_dram_offset = 0;
int pcibios_assign_bus_offset = 1;
void pcibios_make_OF_bus_map(void);
static void fixup_cpc710_pci64(struct pci_dev* dev);
static u8* pci_to_OF_bus_map;
/* By default, we don't re-assign bus numbers. We do this only on
* some pmacs
*/
static int pci_assign_all_buses;
static int pci_bus_count;
/* This will remain NULL for now, until isa-bridge.c is made common
* to both 32-bit and 64-bit.
*/
struct pci_dev *isa_bridge_pcidev;
EXPORT_SYMBOL_GPL(isa_bridge_pcidev);
static void
fixup_hide_host_resource_fsl(struct pci_dev *dev)
{
int i, class = dev->class >> 8;
if ((class == PCI_CLASS_PROCESSOR_POWERPC ||
class == PCI_CLASS_BRIDGE_OTHER) &&
(dev->hdr_type == PCI_HEADER_TYPE_NORMAL) &&
(dev->bus->parent == NULL)) {
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
dev->resource[i].flags = 0;
}
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl);
static void
fixup_cpc710_pci64(struct pci_dev* dev)
{
/* Hide the PCI64 BARs from the kernel as their content doesn't
* fit well in the resource management
*/
dev->resource[0].start = dev->resource[0].end = 0;
dev->resource[0].flags = 0;
dev->resource[1].start = dev->resource[1].end = 0;
dev->resource[1].flags = 0;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64);
/*
* Functions below are used on OpenFirmware machines.
*/
static void
make_one_node_map(struct device_node* node, u8 pci_bus)
{
const int *bus_range;
int len;
if (pci_bus >= pci_bus_count)
return;
bus_range = of_get_property(node, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s, "
"assuming it starts at 0\n", node->full_name);
pci_to_OF_bus_map[pci_bus] = 0;
} else
pci_to_OF_bus_map[pci_bus] = bus_range[0];
for_each_child_of_node(node, node) {
struct pci_dev* dev;
const unsigned int *class_code, *reg;
class_code = of_get_property(node, "class-code", NULL);
if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
continue;
reg = of_get_property(node, "reg", NULL);
if (!reg)
continue;
dev = pci_get_bus_and_slot(pci_bus, ((reg[0] >> 8) & 0xff));
if (!dev || !dev->subordinate) {
pci_dev_put(dev);
continue;
}
make_one_node_map(node, dev->subordinate->number);
pci_dev_put(dev);
}
}
void
pcibios_make_OF_bus_map(void)
{
int i;
struct pci_controller *hose, *tmp;
struct property *map_prop;
struct device_node *dn;
[PATCH] getting rid of all casts of k[cmz]alloc() calls Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 16:35:56 +08:00
pci_to_OF_bus_map = kmalloc(pci_bus_count, GFP_KERNEL);
if (!pci_to_OF_bus_map) {
printk(KERN_ERR "Can't allocate OF bus map !\n");
return;
}
/* We fill the bus map with invalid values, that helps
* debugging.
*/
for (i=0; i<pci_bus_count; i++)
pci_to_OF_bus_map[i] = 0xff;
/* For each hose, we begin searching bridges */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
struct device_node* node = hose->dn;
if (!node)
continue;
make_one_node_map(node, hose->first_busno);
}
dn = of_find_node_by_path("/");
map_prop = of_find_property(dn, "pci-OF-bus-map", NULL);
if (map_prop) {
BUG_ON(pci_bus_count > map_prop->length);
memcpy(map_prop->value, pci_to_OF_bus_map, pci_bus_count);
}
of_node_put(dn);
#ifdef DEBUG
printk("PCI->OF bus map:\n");
for (i=0; i<pci_bus_count; i++) {
if (pci_to_OF_bus_map[i] == 0xff)
continue;
printk("%d -> %d\n", i, pci_to_OF_bus_map[i]);
}
#endif
}
typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data);
static struct device_node*
scan_OF_pci_childs(struct device_node *parent, pci_OF_scan_iterator filter, void* data)
{
struct device_node *node;
struct device_node* sub_node;
for_each_child_of_node(parent, node) {
const unsigned int *class_code;
if (filter(node, data)) {
of_node_put(node);
return node;
}
/* For PCI<->PCI bridges or CardBus bridges, we go down
* Note: some OFs create a parent node "multifunc-device" as
* a fake root for all functions of a multi-function device,
* we go down them as well.
*/
class_code = of_get_property(node, "class-code", NULL);
if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
strcmp(node->name, "multifunc-device"))
continue;
sub_node = scan_OF_pci_childs(node, filter, data);
if (sub_node) {
of_node_put(node);
return sub_node;
}
}
return NULL;
}
static struct device_node *scan_OF_for_pci_dev(struct device_node *parent,
unsigned int devfn)
{
struct device_node *np, *cnp;
const u32 *reg;
unsigned int psize;
for_each_child_of_node(parent, np) {
reg = of_get_property(np, "reg", &psize);
if (reg && psize >= 4 && ((reg[0] >> 8) & 0xff) == devfn)
return np;
/* Note: some OFs create a parent node "multifunc-device" as
* a fake root for all functions of a multi-function device,
* we go down them as well. */
if (!strcmp(np->name, "multifunc-device")) {
cnp = scan_OF_for_pci_dev(np, devfn);
if (cnp)
return cnp;
}
}
return NULL;
}
static struct device_node *scan_OF_for_pci_bus(struct pci_bus *bus)
{
struct device_node *parent, *np;
/* Are we a root bus ? */
if (bus->self == NULL || bus->parent == NULL) {
struct pci_controller *hose = pci_bus_to_host(bus);
if (hose == NULL)
return NULL;
return of_node_get(hose->dn);
}
/* not a root bus, we need to get our parent */
parent = scan_OF_for_pci_bus(bus->parent);
if (parent == NULL)
return NULL;
/* now iterate for children for a match */
np = scan_OF_for_pci_dev(parent, bus->self->devfn);
of_node_put(parent);
return np;
}
/*
* Scans the OF tree for a device node matching a PCI device
*/
struct device_node *
pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
{
struct device_node *parent, *np;
pr_debug("pci_busdev_to_OF_node(%d,0x%x)\n", bus->number, devfn);
parent = scan_OF_for_pci_bus(bus);
if (parent == NULL)
return NULL;
pr_debug(" parent is %s\n", parent ? parent->full_name : "<NULL>");
np = scan_OF_for_pci_dev(parent, devfn);
of_node_put(parent);
pr_debug(" result is %s\n", np ? np->full_name : "<NULL>");
/* XXX most callers don't release the returned node
* mostly because ppc64 doesn't increase the refcount,
* we need to fix that.
*/
return np;
}
EXPORT_SYMBOL(pci_busdev_to_OF_node);
struct device_node*
pci_device_to_OF_node(struct pci_dev *dev)
{
return pci_busdev_to_OF_node(dev->bus, dev->devfn);
}
EXPORT_SYMBOL(pci_device_to_OF_node);
static int
find_OF_pci_device_filter(struct device_node* node, void* data)
{
return ((void *)node == data);
}
/*
* Returns the PCI device matching a given OF node
*/
int
pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn)
{
const unsigned int *reg;
struct pci_controller* hose;
struct pci_dev* dev = NULL;
/* Make sure it's really a PCI device */
hose = pci_find_hose_for_OF_device(node);
if (!hose || !hose->dn)
return -ENODEV;
if (!scan_OF_pci_childs(hose->dn,
find_OF_pci_device_filter, (void *)node))
return -ENODEV;
reg = of_get_property(node, "reg", NULL);
if (!reg)
return -ENODEV;
*bus = (reg[0] >> 16) & 0xff;
*devfn = ((reg[0] >> 8) & 0xff);
/* Ok, here we need some tweak. If we have already renumbered
* all busses, we can't rely on the OF bus number any more.
* the pci_to_OF_bus_map is not enough as several PCI busses
* may match the same OF bus number.
*/
if (!pci_to_OF_bus_map)
return 0;
for_each_pci_dev(dev)
if (pci_to_OF_bus_map[dev->bus->number] == *bus &&
dev->devfn == *devfn) {
*bus = dev->bus->number;
pci_dev_put(dev);
return 0;
}
return -ENODEV;
}
EXPORT_SYMBOL(pci_device_from_OF_node);
/* We create the "pci-OF-bus-map" property now so it appears in the
* /proc device tree
*/
void __init
pci_create_OF_bus_map(void)
{
struct property* of_prop;
struct device_node *dn;
of_prop = (struct property*) alloc_bootmem(sizeof(struct property) + 256);
if (!of_prop)
return;
dn = of_find_node_by_path("/");
if (dn) {
memset(of_prop, -1, sizeof(struct property) + 256);
of_prop->name = "pci-OF-bus-map";
of_prop->length = 256;
of_prop->value = &of_prop[1];
prom_add_property(dn, of_prop);
of_node_put(dn);
}
}
void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose)
{
unsigned long io_offset;
struct resource *res = &hose->io_resource;
/* Fixup IO space offset */
io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
res->start = (res->start + io_offset) & 0xffffffffu;
res->end = (res->end + io_offset) & 0xffffffffu;
}
static int __init pcibios_init(void)
{
struct pci_controller *hose, *tmp;
int next_busno = 0;
printk(KERN_INFO "PCI: Probing PCI hardware\n");
if (ppc_pci_flags & PPC_PCI_REASSIGN_ALL_BUS)
pci_assign_all_buses = 1;
/* Scan all of the recorded PCI controllers. */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
if (pci_assign_all_buses)
hose->first_busno = next_busno;
hose->last_busno = 0xff;
pcibios_scan_phb(hose, hose);
pci_bus_add_devices(hose->bus);
if (pci_assign_all_buses || next_busno <= hose->last_busno)
next_busno = hose->last_busno + pcibios_assign_bus_offset;
}
pci_bus_count = next_busno;
/* OpenFirmware based machines need a map of OF bus
* numbers vs. kernel bus numbers since we may have to
* remap them.
*/
if (pci_assign_all_buses)
pcibios_make_OF_bus_map();
/* Call common code to handle resource allocation */
pcibios_resource_survey();
/* Call machine dependent post-init code */
if (ppc_md.pcibios_after_init)
ppc_md.pcibios_after_init();
return 0;
}
subsys_initcall(pcibios_init);
static struct pci_controller*
pci_bus_to_hose(int bus)
{
struct pci_controller *hose, *tmp;
list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
if (bus >= hose->first_busno && bus <= hose->last_busno)
return hose;
return NULL;
}
/* Provide information on locations of various I/O regions in physical
* memory. Do this on a per-card basis so that we choose the right
* root bridge.
* Note that the returned IO or memory base is a physical address
*/
long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
{
struct pci_controller* hose;
long result = -EOPNOTSUPP;
hose = pci_bus_to_hose(bus);
if (!hose)
return -ENODEV;
switch (which) {
case IOBASE_BRIDGE_NUMBER:
return (long)hose->first_busno;
case IOBASE_MEMORY:
return (long)hose->pci_mem_offset;
case IOBASE_IO:
return (long)hose->io_base_phys;
case IOBASE_ISA_IO:
return (long)isa_io_base;
case IOBASE_ISA_MEM:
return (long)isa_mem_base;
}
return result;
}