2009-01-23 08:05:23 +08:00
|
|
|
/*
|
|
|
|
* drivers/mmc/host/omap_hsmmc.c
|
|
|
|
*
|
|
|
|
* Driver for OMAP2430/3430 MMC controller.
|
|
|
|
*
|
|
|
|
* Copyright (C) 2007 Texas Instruments.
|
|
|
|
*
|
|
|
|
* Authors:
|
|
|
|
* Syed Mohammed Khasim <x0khasim@ti.com>
|
|
|
|
* Madhusudhan <madhu.cr@ti.com>
|
|
|
|
* Mohit Jalori <mjalori@ti.com>
|
|
|
|
*
|
|
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
|
|
* kind, whether express or implied.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <linux/timer.h>
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/mmc/host.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/semaphore.h>
|
|
|
|
#include <mach/dma.h>
|
|
|
|
#include <mach/hardware.h>
|
|
|
|
#include <mach/board.h>
|
|
|
|
#include <mach/mmc.h>
|
|
|
|
#include <mach/cpu.h>
|
|
|
|
|
|
|
|
/* OMAP HSMMC Host Controller Registers */
|
|
|
|
#define OMAP_HSMMC_SYSCONFIG 0x0010
|
|
|
|
#define OMAP_HSMMC_CON 0x002C
|
|
|
|
#define OMAP_HSMMC_BLK 0x0104
|
|
|
|
#define OMAP_HSMMC_ARG 0x0108
|
|
|
|
#define OMAP_HSMMC_CMD 0x010C
|
|
|
|
#define OMAP_HSMMC_RSP10 0x0110
|
|
|
|
#define OMAP_HSMMC_RSP32 0x0114
|
|
|
|
#define OMAP_HSMMC_RSP54 0x0118
|
|
|
|
#define OMAP_HSMMC_RSP76 0x011C
|
|
|
|
#define OMAP_HSMMC_DATA 0x0120
|
|
|
|
#define OMAP_HSMMC_HCTL 0x0128
|
|
|
|
#define OMAP_HSMMC_SYSCTL 0x012C
|
|
|
|
#define OMAP_HSMMC_STAT 0x0130
|
|
|
|
#define OMAP_HSMMC_IE 0x0134
|
|
|
|
#define OMAP_HSMMC_ISE 0x0138
|
|
|
|
#define OMAP_HSMMC_CAPA 0x0140
|
|
|
|
|
|
|
|
#define VS18 (1 << 26)
|
|
|
|
#define VS30 (1 << 25)
|
|
|
|
#define SDVS18 (0x5 << 9)
|
|
|
|
#define SDVS30 (0x6 << 9)
|
|
|
|
#define SDVSCLR 0xFFFFF1FF
|
|
|
|
#define SDVSDET 0x00000400
|
|
|
|
#define AUTOIDLE 0x1
|
|
|
|
#define SDBP (1 << 8)
|
|
|
|
#define DTO 0xe
|
|
|
|
#define ICE 0x1
|
|
|
|
#define ICS 0x2
|
|
|
|
#define CEN (1 << 2)
|
|
|
|
#define CLKD_MASK 0x0000FFC0
|
|
|
|
#define CLKD_SHIFT 6
|
|
|
|
#define DTO_MASK 0x000F0000
|
|
|
|
#define DTO_SHIFT 16
|
|
|
|
#define INT_EN_MASK 0x307F0033
|
|
|
|
#define INIT_STREAM (1 << 1)
|
|
|
|
#define DP_SELECT (1 << 21)
|
|
|
|
#define DDIR (1 << 4)
|
|
|
|
#define DMA_EN 0x1
|
|
|
|
#define MSBS (1 << 5)
|
|
|
|
#define BCE (1 << 1)
|
|
|
|
#define FOUR_BIT (1 << 1)
|
|
|
|
#define CC 0x1
|
|
|
|
#define TC 0x02
|
|
|
|
#define OD 0x1
|
|
|
|
#define ERR (1 << 15)
|
|
|
|
#define CMD_TIMEOUT (1 << 16)
|
|
|
|
#define DATA_TIMEOUT (1 << 20)
|
|
|
|
#define CMD_CRC (1 << 17)
|
|
|
|
#define DATA_CRC (1 << 21)
|
|
|
|
#define CARD_ERR (1 << 28)
|
|
|
|
#define STAT_CLEAR 0xFFFFFFFF
|
|
|
|
#define INIT_STREAM_CMD 0x00000000
|
|
|
|
#define DUAL_VOLT_OCR_BIT 7
|
|
|
|
#define SRC (1 << 25)
|
|
|
|
#define SRD (1 << 26)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* FIXME: Most likely all the data using these _DEVID defines should come
|
|
|
|
* from the platform_data, or implemented in controller and slot specific
|
|
|
|
* functions.
|
|
|
|
*/
|
|
|
|
#define OMAP_MMC1_DEVID 0
|
|
|
|
#define OMAP_MMC2_DEVID 1
|
|
|
|
|
|
|
|
#define OMAP_MMC_DATADIR_NONE 0
|
|
|
|
#define OMAP_MMC_DATADIR_READ 1
|
|
|
|
#define OMAP_MMC_DATADIR_WRITE 2
|
|
|
|
#define MMC_TIMEOUT_MS 20
|
|
|
|
#define OMAP_MMC_MASTER_CLOCK 96000000
|
|
|
|
#define DRIVER_NAME "mmci-omap-hs"
|
|
|
|
|
|
|
|
/*
|
|
|
|
* One controller can have multiple slots, like on some omap boards using
|
|
|
|
* omap.c controller driver. Luckily this is not currently done on any known
|
|
|
|
* omap_hsmmc.c device.
|
|
|
|
*/
|
|
|
|
#define mmc_slot(host) (host->pdata->slots[host->slot_id])
|
|
|
|
|
|
|
|
/*
|
|
|
|
* MMC Host controller read/write API's
|
|
|
|
*/
|
|
|
|
#define OMAP_HSMMC_READ(base, reg) \
|
|
|
|
__raw_readl((base) + OMAP_HSMMC_##reg)
|
|
|
|
|
|
|
|
#define OMAP_HSMMC_WRITE(base, reg, val) \
|
|
|
|
__raw_writel((val), (base) + OMAP_HSMMC_##reg)
|
|
|
|
|
|
|
|
struct mmc_omap_host {
|
|
|
|
struct device *dev;
|
|
|
|
struct mmc_host *mmc;
|
|
|
|
struct mmc_request *mrq;
|
|
|
|
struct mmc_command *cmd;
|
|
|
|
struct mmc_data *data;
|
|
|
|
struct clk *fclk;
|
|
|
|
struct clk *iclk;
|
|
|
|
struct clk *dbclk;
|
|
|
|
struct semaphore sem;
|
|
|
|
struct work_struct mmc_carddetect_work;
|
|
|
|
void __iomem *base;
|
|
|
|
resource_size_t mapbase;
|
|
|
|
unsigned int id;
|
|
|
|
unsigned int dma_len;
|
|
|
|
unsigned int dma_dir;
|
|
|
|
unsigned char bus_mode;
|
|
|
|
unsigned char datadir;
|
|
|
|
u32 *buffer;
|
|
|
|
u32 bytesleft;
|
|
|
|
int suspended;
|
|
|
|
int irq;
|
|
|
|
int carddetect;
|
|
|
|
int use_dma, dma_ch;
|
|
|
|
int initstr;
|
|
|
|
int slot_id;
|
|
|
|
int dbclk_enabled;
|
|
|
|
struct omap_mmc_platform_data *pdata;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Stop clock to the card
|
|
|
|
*/
|
|
|
|
static void omap_mmc_stop_clock(struct mmc_omap_host *host)
|
|
|
|
{
|
|
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
|
|
OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN);
|
|
|
|
if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0)
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Send init stream sequence to card
|
|
|
|
* before sending IDLE command
|
|
|
|
*/
|
|
|
|
static void send_init_stream(struct mmc_omap_host *host)
|
|
|
|
{
|
|
|
|
int reg = 0;
|
|
|
|
unsigned long timeout;
|
|
|
|
|
|
|
|
disable_irq(host->irq);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, CON,
|
|
|
|
OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD);
|
|
|
|
|
|
|
|
timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
|
|
|
|
while ((reg != CC) && time_before(jiffies, timeout))
|
|
|
|
reg = OMAP_HSMMC_READ(host->base, STAT) & CC;
|
|
|
|
|
|
|
|
OMAP_HSMMC_WRITE(host->base, CON,
|
|
|
|
OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM);
|
|
|
|
enable_irq(host->irq);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline
|
|
|
|
int mmc_omap_cover_is_closed(struct mmc_omap_host *host)
|
|
|
|
{
|
|
|
|
int r = 1;
|
|
|
|
|
|
|
|
if (host->pdata->slots[host->slot_id].get_cover_state)
|
|
|
|
r = host->pdata->slots[host->slot_id].get_cover_state(host->dev,
|
|
|
|
host->slot_id);
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t
|
|
|
|
mmc_omap_show_cover_switch(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
|
|
|
|
struct mmc_omap_host *host = mmc_priv(mmc);
|
|
|
|
|
|
|
|
return sprintf(buf, "%s\n", mmc_omap_cover_is_closed(host) ? "closed" :
|
|
|
|
"open");
|
|
|
|
}
|
|
|
|
|
|
|
|
static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL);
|
|
|
|
|
|
|
|
static ssize_t
|
|
|
|
mmc_omap_show_slot_name(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
|
|
|
|
struct mmc_omap_host *host = mmc_priv(mmc);
|
|
|
|
struct omap_mmc_slot_data slot = host->pdata->slots[host->slot_id];
|
|
|
|
|
|
|
|
return sprintf(buf, "slot:%s\n", slot.name);
|
|
|
|
}
|
|
|
|
|
|
|
|
static DEVICE_ATTR(slot_name, S_IRUGO, mmc_omap_show_slot_name, NULL);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Configure the response type and send the cmd.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd,
|
|
|
|
struct mmc_data *data)
|
|
|
|
{
|
|
|
|
int cmdreg = 0, resptype = 0, cmdtype = 0;
|
|
|
|
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n",
|
|
|
|
mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
|
|
|
|
host->cmd = cmd;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Clear status bits and enable interrupts
|
|
|
|
*/
|
|
|
|
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
|
|
|
|
|
|
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
|
|
if (cmd->flags & MMC_RSP_136)
|
|
|
|
resptype = 1;
|
|
|
|
else
|
|
|
|
resptype = 2;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Unlike OMAP1 controller, the cmdtype does not seem to be based on
|
|
|
|
* ac, bc, adtc, bcr. Only commands ending an open ended transfer need
|
|
|
|
* a val of 0x3, rest 0x0.
|
|
|
|
*/
|
|
|
|
if (cmd == host->mrq->stop)
|
|
|
|
cmdtype = 0x3;
|
|
|
|
|
|
|
|
cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
|
|
|
|
|
|
|
|
if (data) {
|
|
|
|
cmdreg |= DP_SELECT | MSBS | BCE;
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
|
|
cmdreg |= DDIR;
|
|
|
|
else
|
|
|
|
cmdreg &= ~(DDIR);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (host->use_dma)
|
|
|
|
cmdreg |= DMA_EN;
|
|
|
|
|
|
|
|
OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, CMD, cmdreg);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Notify the transfer complete to MMC core
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
|
|
|
|
{
|
|
|
|
host->data = NULL;
|
|
|
|
|
|
|
|
if (host->use_dma && host->dma_ch != -1)
|
|
|
|
dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
|
|
|
|
host->dma_dir);
|
|
|
|
|
|
|
|
host->datadir = OMAP_MMC_DATADIR_NONE;
|
|
|
|
|
|
|
|
if (!data->error)
|
|
|
|
data->bytes_xfered += data->blocks * (data->blksz);
|
|
|
|
else
|
|
|
|
data->bytes_xfered = 0;
|
|
|
|
|
|
|
|
if (!data->stop) {
|
|
|
|
host->mrq = NULL;
|
|
|
|
mmc_request_done(host->mmc, data->mrq);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
mmc_omap_start_command(host, data->stop, NULL);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Notify the core about command completion
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
|
|
|
|
{
|
|
|
|
host->cmd = NULL;
|
|
|
|
|
|
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
|
|
if (cmd->flags & MMC_RSP_136) {
|
|
|
|
/* response type 2 */
|
|
|
|
cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10);
|
|
|
|
cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32);
|
|
|
|
cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54);
|
|
|
|
cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76);
|
|
|
|
} else {
|
|
|
|
/* response types 1, 1b, 3, 4, 5, 6 */
|
|
|
|
cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (host->data == NULL || cmd->error) {
|
|
|
|
host->mrq = NULL;
|
|
|
|
mmc_request_done(host->mmc, cmd->mrq);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* DMA clean up for command errors
|
|
|
|
*/
|
|
|
|
static void mmc_dma_cleanup(struct mmc_omap_host *host)
|
|
|
|
{
|
|
|
|
host->data->error = -ETIMEDOUT;
|
|
|
|
|
|
|
|
if (host->use_dma && host->dma_ch != -1) {
|
|
|
|
dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
|
|
|
|
host->dma_dir);
|
|
|
|
omap_free_dma(host->dma_ch);
|
|
|
|
host->dma_ch = -1;
|
|
|
|
up(&host->sem);
|
|
|
|
}
|
|
|
|
host->data = NULL;
|
|
|
|
host->datadir = OMAP_MMC_DATADIR_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Readable error output
|
|
|
|
*/
|
|
|
|
#ifdef CONFIG_MMC_DEBUG
|
|
|
|
static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status)
|
|
|
|
{
|
|
|
|
/* --- means reserved bit without definition at documentation */
|
|
|
|
static const char *mmc_omap_status_bits[] = {
|
|
|
|
"CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ",
|
|
|
|
"OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC",
|
|
|
|
"CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---",
|
|
|
|
"---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---"
|
|
|
|
};
|
|
|
|
char res[256];
|
|
|
|
char *buf = res;
|
|
|
|
int len, i;
|
|
|
|
|
|
|
|
len = sprintf(buf, "MMC IRQ 0x%x :", status);
|
|
|
|
buf += len;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++)
|
|
|
|
if (status & (1 << i)) {
|
|
|
|
len = sprintf(buf, " %s", mmc_omap_status_bits[i]);
|
|
|
|
buf += len;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "%s\n", res);
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_MMC_DEBUG */
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* MMC controller IRQ handler
|
|
|
|
*/
|
|
|
|
static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct mmc_omap_host *host = dev_id;
|
|
|
|
struct mmc_data *data;
|
|
|
|
int end_cmd = 0, end_trans = 0, status;
|
|
|
|
|
|
|
|
if (host->cmd == NULL && host->data == NULL) {
|
|
|
|
OMAP_HSMMC_WRITE(host->base, STAT,
|
|
|
|
OMAP_HSMMC_READ(host->base, STAT));
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
data = host->data;
|
|
|
|
status = OMAP_HSMMC_READ(host->base, STAT);
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
|
|
|
|
|
|
|
|
if (status & ERR) {
|
|
|
|
#ifdef CONFIG_MMC_DEBUG
|
|
|
|
mmc_omap_report_irq(host, status);
|
|
|
|
#endif
|
|
|
|
if ((status & CMD_TIMEOUT) ||
|
|
|
|
(status & CMD_CRC)) {
|
|
|
|
if (host->cmd) {
|
|
|
|
if (status & CMD_TIMEOUT) {
|
|
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
|
|
OMAP_HSMMC_READ(host->base,
|
|
|
|
SYSCTL) | SRC);
|
|
|
|
while (OMAP_HSMMC_READ(host->base,
|
|
|
|
SYSCTL) & SRC)
|
|
|
|
;
|
|
|
|
|
|
|
|
host->cmd->error = -ETIMEDOUT;
|
|
|
|
} else {
|
|
|
|
host->cmd->error = -EILSEQ;
|
|
|
|
}
|
|
|
|
end_cmd = 1;
|
|
|
|
}
|
|
|
|
if (host->data)
|
|
|
|
mmc_dma_cleanup(host);
|
|
|
|
}
|
|
|
|
if ((status & DATA_TIMEOUT) ||
|
|
|
|
(status & DATA_CRC)) {
|
|
|
|
if (host->data) {
|
|
|
|
if (status & DATA_TIMEOUT)
|
|
|
|
mmc_dma_cleanup(host);
|
|
|
|
else
|
|
|
|
host->data->error = -EILSEQ;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
|
|
OMAP_HSMMC_READ(host->base,
|
|
|
|
SYSCTL) | SRD);
|
|
|
|
while (OMAP_HSMMC_READ(host->base,
|
|
|
|
SYSCTL) & SRD)
|
|
|
|
;
|
|
|
|
end_trans = 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (status & CARD_ERR) {
|
|
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
|
|
"Ignoring card err CMD%d\n", host->cmd->opcode);
|
|
|
|
if (host->cmd)
|
|
|
|
end_cmd = 1;
|
|
|
|
if (host->data)
|
|
|
|
end_trans = 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
OMAP_HSMMC_WRITE(host->base, STAT, status);
|
|
|
|
|
|
|
|
if (end_cmd || (status & CC))
|
|
|
|
mmc_omap_cmd_done(host, host->cmd);
|
|
|
|
if (end_trans || (status & TC))
|
|
|
|
mmc_omap_xfer_done(host, data);
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Switch MMC operating voltage
|
|
|
|
*/
|
|
|
|
static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
|
|
|
|
{
|
|
|
|
u32 reg_val = 0;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Disable the clocks */
|
|
|
|
clk_disable(host->fclk);
|
|
|
|
clk_disable(host->iclk);
|
|
|
|
clk_disable(host->dbclk);
|
|
|
|
|
|
|
|
/* Turn the power off */
|
|
|
|
ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
|
|
|
|
if (ret != 0)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
/* Turn the power ON with given VDD 1.8 or 3.0v */
|
|
|
|
ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
|
|
|
|
if (ret != 0)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
clk_enable(host->fclk);
|
|
|
|
clk_enable(host->iclk);
|
|
|
|
clk_enable(host->dbclk);
|
|
|
|
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
|
|
OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
|
|
|
|
reg_val = OMAP_HSMMC_READ(host->base, HCTL);
|
|
|
|
/*
|
|
|
|
* If a MMC dual voltage card is detected, the set_ios fn calls
|
|
|
|
* this fn with VDD bit set for 1.8V. Upon card removal from the
|
|
|
|
* slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
|
|
|
|
*
|
|
|
|
* Only MMC1 supports 3.0V. MMC2 will not function if SDVS30 is
|
|
|
|
* set in HCTL.
|
|
|
|
*/
|
|
|
|
if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) ||
|
|
|
|
((1 << vdd) == MMC_VDD_33_34)))
|
|
|
|
reg_val |= SDVS30;
|
|
|
|
if ((1 << vdd) == MMC_VDD_165_195)
|
|
|
|
reg_val |= SDVS18;
|
|
|
|
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
|
|
|
|
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
|
|
OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
err:
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Work Item to notify the core about card insertion/removal
|
|
|
|
*/
|
|
|
|
static void mmc_omap_detect(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
|
|
|
|
mmc_carddetect_work);
|
2009-02-05 06:42:03 +08:00
|
|
|
struct omap_mmc_slot_data *slot = &mmc_slot(host);
|
|
|
|
|
|
|
|
host->carddetect = slot->card_detect(slot->card_detect_irq);
|
2009-01-23 08:05:23 +08:00
|
|
|
|
|
|
|
sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
|
|
|
|
if (host->carddetect) {
|
|
|
|
mmc_detect_change(host->mmc, (HZ * 200) / 1000);
|
|
|
|
} else {
|
|
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
|
|
OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
|
|
|
|
while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
|
|
|
|
;
|
|
|
|
|
|
|
|
mmc_detect_change(host->mmc, (HZ * 50) / 1000);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ISR for handling card insertion and removal
|
|
|
|
*/
|
|
|
|
static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id;
|
|
|
|
|
|
|
|
schedule_work(&host->mmc_carddetect_work);
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* DMA call back function
|
|
|
|
*/
|
|
|
|
static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data)
|
|
|
|
{
|
|
|
|
struct mmc_omap_host *host = data;
|
|
|
|
|
|
|
|
if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ)
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n");
|
|
|
|
|
|
|
|
if (host->dma_ch < 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
omap_free_dma(host->dma_ch);
|
|
|
|
host->dma_ch = -1;
|
|
|
|
/*
|
|
|
|
* DMA Callback: run in interrupt context.
|
|
|
|
* mutex_unlock will through a kernel warning if used.
|
|
|
|
*/
|
|
|
|
up(&host->sem);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Configure dma src and destination parameters
|
|
|
|
*/
|
|
|
|
static int mmc_omap_config_dma_param(int sync_dir, struct mmc_omap_host *host,
|
|
|
|
struct mmc_data *data)
|
|
|
|
{
|
|
|
|
if (sync_dir == 0) {
|
|
|
|
omap_set_dma_dest_params(host->dma_ch, 0,
|
|
|
|
OMAP_DMA_AMODE_CONSTANT,
|
|
|
|
(host->mapbase + OMAP_HSMMC_DATA), 0, 0);
|
|
|
|
omap_set_dma_src_params(host->dma_ch, 0,
|
|
|
|
OMAP_DMA_AMODE_POST_INC,
|
|
|
|
sg_dma_address(&data->sg[0]), 0, 0);
|
|
|
|
} else {
|
|
|
|
omap_set_dma_src_params(host->dma_ch, 0,
|
|
|
|
OMAP_DMA_AMODE_CONSTANT,
|
|
|
|
(host->mapbase + OMAP_HSMMC_DATA), 0, 0);
|
|
|
|
omap_set_dma_dest_params(host->dma_ch, 0,
|
|
|
|
OMAP_DMA_AMODE_POST_INC,
|
|
|
|
sg_dma_address(&data->sg[0]), 0, 0);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Routine to configure and start DMA for the MMC card
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
mmc_omap_start_dma_transfer(struct mmc_omap_host *host, struct mmc_request *req)
|
|
|
|
{
|
|
|
|
int sync_dev, sync_dir = 0;
|
|
|
|
int dma_ch = 0, ret = 0, err = 1;
|
|
|
|
struct mmc_data *data = req->data;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If for some reason the DMA transfer is still active,
|
|
|
|
* we wait for timeout period and free the dma
|
|
|
|
*/
|
|
|
|
if (host->dma_ch != -1) {
|
|
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
|
|
schedule_timeout(100);
|
|
|
|
if (down_trylock(&host->sem)) {
|
|
|
|
omap_free_dma(host->dma_ch);
|
|
|
|
host->dma_ch = -1;
|
|
|
|
up(&host->sem);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (down_trylock(&host->sem))
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(data->flags & MMC_DATA_WRITE)) {
|
|
|
|
host->dma_dir = DMA_FROM_DEVICE;
|
|
|
|
if (host->id == OMAP_MMC1_DEVID)
|
|
|
|
sync_dev = OMAP24XX_DMA_MMC1_RX;
|
|
|
|
else
|
|
|
|
sync_dev = OMAP24XX_DMA_MMC2_RX;
|
|
|
|
} else {
|
|
|
|
host->dma_dir = DMA_TO_DEVICE;
|
|
|
|
if (host->id == OMAP_MMC1_DEVID)
|
|
|
|
sync_dev = OMAP24XX_DMA_MMC1_TX;
|
|
|
|
else
|
|
|
|
sync_dev = OMAP24XX_DMA_MMC2_TX;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = omap_request_dma(sync_dev, "MMC/SD", mmc_omap_dma_cb,
|
|
|
|
host, &dma_ch);
|
|
|
|
if (ret != 0) {
|
|
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
|
|
"%s: omap_request_dma() failed with %d\n",
|
|
|
|
mmc_hostname(host->mmc), ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
|
|
|
|
data->sg_len, host->dma_dir);
|
|
|
|
host->dma_ch = dma_ch;
|
|
|
|
|
|
|
|
if (!(data->flags & MMC_DATA_WRITE))
|
|
|
|
mmc_omap_config_dma_param(1, host, data);
|
|
|
|
else
|
|
|
|
mmc_omap_config_dma_param(0, host, data);
|
|
|
|
|
|
|
|
if ((data->blksz % 4) == 0)
|
|
|
|
omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32,
|
|
|
|
(data->blksz / 4), data->blocks, OMAP_DMA_SYNC_FRAME,
|
|
|
|
sync_dev, sync_dir);
|
|
|
|
else
|
|
|
|
/* REVISIT: The MMC buffer increments only when MSB is written.
|
|
|
|
* Return error for blksz which is non multiple of four.
|
|
|
|
*/
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
omap_start_dma(dma_ch);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void set_data_timeout(struct mmc_omap_host *host,
|
|
|
|
struct mmc_request *req)
|
|
|
|
{
|
|
|
|
unsigned int timeout, cycle_ns;
|
|
|
|
uint32_t reg, clkd, dto = 0;
|
|
|
|
|
|
|
|
reg = OMAP_HSMMC_READ(host->base, SYSCTL);
|
|
|
|
clkd = (reg & CLKD_MASK) >> CLKD_SHIFT;
|
|
|
|
if (clkd == 0)
|
|
|
|
clkd = 1;
|
|
|
|
|
|
|
|
cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd);
|
|
|
|
timeout = req->data->timeout_ns / cycle_ns;
|
|
|
|
timeout += req->data->timeout_clks;
|
|
|
|
if (timeout) {
|
|
|
|
while ((timeout & 0x80000000) == 0) {
|
|
|
|
dto += 1;
|
|
|
|
timeout <<= 1;
|
|
|
|
}
|
|
|
|
dto = 31 - dto;
|
|
|
|
timeout <<= 1;
|
|
|
|
if (timeout && dto)
|
|
|
|
dto += 1;
|
|
|
|
if (dto >= 13)
|
|
|
|
dto -= 13;
|
|
|
|
else
|
|
|
|
dto = 0;
|
|
|
|
if (dto > 14)
|
|
|
|
dto = 14;
|
|
|
|
}
|
|
|
|
|
|
|
|
reg &= ~DTO_MASK;
|
|
|
|
reg |= dto << DTO_SHIFT;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL, reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Configure block length for MMC/SD cards and initiate the transfer.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
host->data = req->data;
|
|
|
|
|
|
|
|
if (req->data == NULL) {
|
|
|
|
host->datadir = OMAP_MMC_DATADIR_NONE;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, BLK, 0);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz)
|
|
|
|
| (req->data->blocks << 16));
|
|
|
|
set_data_timeout(host, req);
|
|
|
|
|
|
|
|
host->datadir = (req->data->flags & MMC_DATA_WRITE) ?
|
|
|
|
OMAP_MMC_DATADIR_WRITE : OMAP_MMC_DATADIR_READ;
|
|
|
|
|
|
|
|
if (host->use_dma) {
|
|
|
|
ret = mmc_omap_start_dma_transfer(host, req);
|
|
|
|
if (ret != 0) {
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Request function. for read/write operation
|
|
|
|
*/
|
|
|
|
static void omap_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
|
|
|
|
{
|
|
|
|
struct mmc_omap_host *host = mmc_priv(mmc);
|
|
|
|
|
|
|
|
WARN_ON(host->mrq != NULL);
|
|
|
|
host->mrq = req;
|
|
|
|
mmc_omap_prepare_data(host, req);
|
|
|
|
mmc_omap_start_command(host, req->cmd, req->data);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* Routine to configure clock values. Exposed API to core */
|
|
|
|
static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
|
|
{
|
|
|
|
struct mmc_omap_host *host = mmc_priv(mmc);
|
|
|
|
u16 dsor = 0;
|
|
|
|
unsigned long regval;
|
|
|
|
unsigned long timeout;
|
|
|
|
|
|
|
|
switch (ios->power_mode) {
|
|
|
|
case MMC_POWER_OFF:
|
|
|
|
mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
|
|
|
|
/*
|
|
|
|
* Reset bus voltage to 3V if it got set to 1.8V earlier.
|
|
|
|
* REVISIT: If we are able to detect cards after unplugging
|
|
|
|
* a 1.8V card, this code should not be needed.
|
|
|
|
*/
|
|
|
|
if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
|
|
|
|
int vdd = fls(host->mmc->ocr_avail) - 1;
|
|
|
|
if (omap_mmc_switch_opcond(host, vdd) != 0)
|
|
|
|
host->mmc->ios.vdd = vdd;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case MMC_POWER_UP:
|
|
|
|
mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (mmc->ios.bus_width) {
|
|
|
|
case MMC_BUS_WIDTH_4:
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
|
|
OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT);
|
|
|
|
break;
|
|
|
|
case MMC_BUS_WIDTH_1:
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
|
|
OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (host->id == OMAP_MMC1_DEVID) {
|
|
|
|
/* Only MMC1 can operate at 3V/1.8V */
|
|
|
|
if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
|
|
|
|
(ios->vdd == DUAL_VOLT_OCR_BIT)) {
|
|
|
|
/*
|
|
|
|
* The mmc_select_voltage fn of the core does
|
|
|
|
* not seem to set the power_mode to
|
|
|
|
* MMC_POWER_UP upon recalculating the voltage.
|
|
|
|
* vdd 1.8v.
|
|
|
|
*/
|
|
|
|
if (omap_mmc_switch_opcond(host, ios->vdd) != 0)
|
|
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
|
|
"Switch operation failed\n");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ios->clock) {
|
|
|
|
dsor = OMAP_MMC_MASTER_CLOCK / ios->clock;
|
|
|
|
if (dsor < 1)
|
|
|
|
dsor = 1;
|
|
|
|
|
|
|
|
if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock)
|
|
|
|
dsor++;
|
|
|
|
|
|
|
|
if (dsor > 250)
|
|
|
|
dsor = 250;
|
|
|
|
}
|
|
|
|
omap_mmc_stop_clock(host);
|
|
|
|
regval = OMAP_HSMMC_READ(host->base, SYSCTL);
|
|
|
|
regval = regval & ~(CLKD_MASK);
|
|
|
|
regval = regval | (dsor << 6) | (DTO << 16);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL, regval);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
|
|
OMAP_HSMMC_READ(host->base, SYSCTL) | ICE);
|
|
|
|
|
|
|
|
/* Wait till the ICS bit is set */
|
|
|
|
timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
|
|
|
|
while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != 0x2
|
|
|
|
&& time_before(jiffies, timeout))
|
|
|
|
msleep(1);
|
|
|
|
|
|
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
|
|
OMAP_HSMMC_READ(host->base, SYSCTL) | CEN);
|
|
|
|
|
|
|
|
if (ios->power_mode == MMC_POWER_ON)
|
|
|
|
send_init_stream(host);
|
|
|
|
|
|
|
|
if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
|
|
|
|
OMAP_HSMMC_WRITE(host->base, CON,
|
|
|
|
OMAP_HSMMC_READ(host->base, CON) | OD);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int omap_hsmmc_get_cd(struct mmc_host *mmc)
|
|
|
|
{
|
|
|
|
struct mmc_omap_host *host = mmc_priv(mmc);
|
|
|
|
struct omap_mmc_platform_data *pdata = host->pdata;
|
|
|
|
|
|
|
|
if (!pdata->slots[0].card_detect)
|
|
|
|
return -ENOSYS;
|
|
|
|
return pdata->slots[0].card_detect(pdata->slots[0].card_detect_irq);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int omap_hsmmc_get_ro(struct mmc_host *mmc)
|
|
|
|
{
|
|
|
|
struct mmc_omap_host *host = mmc_priv(mmc);
|
|
|
|
struct omap_mmc_platform_data *pdata = host->pdata;
|
|
|
|
|
|
|
|
if (!pdata->slots[0].get_ro)
|
|
|
|
return -ENOSYS;
|
|
|
|
return pdata->slots[0].get_ro(host->dev, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct mmc_host_ops mmc_omap_ops = {
|
|
|
|
.request = omap_mmc_request,
|
|
|
|
.set_ios = omap_mmc_set_ios,
|
|
|
|
.get_cd = omap_hsmmc_get_cd,
|
|
|
|
.get_ro = omap_hsmmc_get_ro,
|
|
|
|
/* NYET -- enable_sdio_irq */
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init omap_mmc_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
|
|
|
|
struct mmc_host *mmc;
|
|
|
|
struct mmc_omap_host *host = NULL;
|
|
|
|
struct resource *res;
|
|
|
|
int ret = 0, irq;
|
|
|
|
u32 hctl, capa;
|
|
|
|
|
|
|
|
if (pdata == NULL) {
|
|
|
|
dev_err(&pdev->dev, "Platform Data is missing\n");
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (pdata->nr_slots == 0) {
|
|
|
|
dev_err(&pdev->dev, "No Slots\n");
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
|
|
if (res == NULL || irq < 0)
|
|
|
|
return -ENXIO;
|
|
|
|
|
|
|
|
res = request_mem_region(res->start, res->end - res->start + 1,
|
|
|
|
pdev->name);
|
|
|
|
if (res == NULL)
|
|
|
|
return -EBUSY;
|
|
|
|
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
|
|
|
|
if (!mmc) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
|
|
|
|
host = mmc_priv(mmc);
|
|
|
|
host->mmc = mmc;
|
|
|
|
host->pdata = pdata;
|
|
|
|
host->dev = &pdev->dev;
|
|
|
|
host->use_dma = 1;
|
|
|
|
host->dev->dma_mask = &pdata->dma_mask;
|
|
|
|
host->dma_ch = -1;
|
|
|
|
host->irq = irq;
|
|
|
|
host->id = pdev->id;
|
|
|
|
host->slot_id = 0;
|
|
|
|
host->mapbase = res->start;
|
|
|
|
host->base = ioremap(host->mapbase, SZ_4K);
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
|
|
INIT_WORK(&host->mmc_carddetect_work, mmc_omap_detect);
|
|
|
|
|
|
|
|
mmc->ops = &mmc_omap_ops;
|
|
|
|
mmc->f_min = 400000;
|
|
|
|
mmc->f_max = 52000000;
|
|
|
|
|
|
|
|
sema_init(&host->sem, 1);
|
|
|
|
|
|
|
|
host->iclk = clk_get(&pdev->dev, "mmchs_ick");
|
|
|
|
if (IS_ERR(host->iclk)) {
|
|
|
|
ret = PTR_ERR(host->iclk);
|
|
|
|
host->iclk = NULL;
|
|
|
|
goto err1;
|
|
|
|
}
|
|
|
|
host->fclk = clk_get(&pdev->dev, "mmchs_fck");
|
|
|
|
if (IS_ERR(host->fclk)) {
|
|
|
|
ret = PTR_ERR(host->fclk);
|
|
|
|
host->fclk = NULL;
|
|
|
|
clk_put(host->iclk);
|
|
|
|
goto err1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (clk_enable(host->fclk) != 0) {
|
|
|
|
clk_put(host->iclk);
|
|
|
|
clk_put(host->fclk);
|
|
|
|
goto err1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (clk_enable(host->iclk) != 0) {
|
|
|
|
clk_disable(host->fclk);
|
|
|
|
clk_put(host->iclk);
|
|
|
|
clk_put(host->fclk);
|
|
|
|
goto err1;
|
|
|
|
}
|
|
|
|
|
|
|
|
host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
|
|
|
|
/*
|
|
|
|
* MMC can still work without debounce clock.
|
|
|
|
*/
|
|
|
|
if (IS_ERR(host->dbclk))
|
|
|
|
dev_warn(mmc_dev(host->mmc), "Failed to get debounce clock\n");
|
|
|
|
else
|
|
|
|
if (clk_enable(host->dbclk) != 0)
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
|
|
|
|
" clk failed\n");
|
|
|
|
else
|
|
|
|
host->dbclk_enabled = 1;
|
|
|
|
|
|
|
|
#ifdef CONFIG_MMC_BLOCK_BOUNCE
|
|
|
|
mmc->max_phys_segs = 1;
|
|
|
|
mmc->max_hw_segs = 1;
|
|
|
|
#endif
|
|
|
|
mmc->max_blk_size = 512; /* Block Length at max can be 1024 */
|
|
|
|
mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */
|
|
|
|
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
|
|
|
|
mmc->max_seg_size = mmc->max_req_size;
|
|
|
|
|
|
|
|
mmc->ocr_avail = mmc_slot(host).ocr_mask;
|
|
|
|
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
|
|
|
|
|
|
|
|
if (pdata->slots[host->slot_id].wires >= 4)
|
|
|
|
mmc->caps |= MMC_CAP_4_BIT_DATA;
|
|
|
|
|
|
|
|
/* Only MMC1 supports 3.0V */
|
|
|
|
if (host->id == OMAP_MMC1_DEVID) {
|
|
|
|
hctl = SDVS30;
|
|
|
|
capa = VS30 | VS18;
|
|
|
|
} else {
|
|
|
|
hctl = SDVS18;
|
|
|
|
capa = VS18;
|
|
|
|
}
|
|
|
|
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
|
|
OMAP_HSMMC_READ(host->base, HCTL) | hctl);
|
|
|
|
|
|
|
|
OMAP_HSMMC_WRITE(host->base, CAPA,
|
|
|
|
OMAP_HSMMC_READ(host->base, CAPA) | capa);
|
|
|
|
|
|
|
|
/* Set the controller to AUTO IDLE mode */
|
|
|
|
OMAP_HSMMC_WRITE(host->base, SYSCONFIG,
|
|
|
|
OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE);
|
|
|
|
|
|
|
|
/* Set SD bus power bit */
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
|
|
OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
|
|
|
|
|
|
|
|
/* Request IRQ for MMC operations */
|
|
|
|
ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED,
|
|
|
|
mmc_hostname(mmc), host);
|
|
|
|
if (ret) {
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
|
|
|
|
goto err_irq;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (pdata->init != NULL) {
|
|
|
|
if (pdata->init(&pdev->dev) != 0) {
|
|
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
|
|
"Unable to configure MMC IRQs\n");
|
|
|
|
goto err_irq_cd_init;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Request IRQ for card detect */
|
|
|
|
if ((mmc_slot(host).card_detect_irq) && (mmc_slot(host).card_detect)) {
|
|
|
|
ret = request_irq(mmc_slot(host).card_detect_irq,
|
|
|
|
omap_mmc_cd_handler,
|
|
|
|
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
|
|
|
|
| IRQF_DISABLED,
|
|
|
|
mmc_hostname(mmc), host);
|
|
|
|
if (ret) {
|
|
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
|
|
"Unable to grab MMC CD IRQ\n");
|
|
|
|
goto err_irq_cd;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
|
|
|
|
|
|
|
|
mmc_add_host(mmc);
|
|
|
|
|
|
|
|
if (host->pdata->slots[host->slot_id].name != NULL) {
|
|
|
|
ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name);
|
|
|
|
if (ret < 0)
|
|
|
|
goto err_slot_name;
|
|
|
|
}
|
|
|
|
if (mmc_slot(host).card_detect_irq && mmc_slot(host).card_detect &&
|
|
|
|
host->pdata->slots[host->slot_id].get_cover_state) {
|
|
|
|
ret = device_create_file(&mmc->class_dev,
|
|
|
|
&dev_attr_cover_switch);
|
|
|
|
if (ret < 0)
|
|
|
|
goto err_cover_switch;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_cover_switch:
|
|
|
|
device_remove_file(&mmc->class_dev, &dev_attr_cover_switch);
|
|
|
|
err_slot_name:
|
|
|
|
mmc_remove_host(mmc);
|
|
|
|
err_irq_cd:
|
|
|
|
free_irq(mmc_slot(host).card_detect_irq, host);
|
|
|
|
err_irq_cd_init:
|
|
|
|
free_irq(host->irq, host);
|
|
|
|
err_irq:
|
|
|
|
clk_disable(host->fclk);
|
|
|
|
clk_disable(host->iclk);
|
|
|
|
clk_put(host->fclk);
|
|
|
|
clk_put(host->iclk);
|
|
|
|
if (host->dbclk_enabled) {
|
|
|
|
clk_disable(host->dbclk);
|
|
|
|
clk_put(host->dbclk);
|
|
|
|
}
|
|
|
|
|
|
|
|
err1:
|
|
|
|
iounmap(host->base);
|
|
|
|
err:
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "Probe Failed\n");
|
|
|
|
release_mem_region(res->start, res->end - res->start + 1);
|
|
|
|
if (host)
|
|
|
|
mmc_free_host(mmc);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int omap_mmc_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct mmc_omap_host *host = platform_get_drvdata(pdev);
|
|
|
|
struct resource *res;
|
|
|
|
|
|
|
|
if (host) {
|
|
|
|
mmc_remove_host(host->mmc);
|
|
|
|
if (host->pdata->cleanup)
|
|
|
|
host->pdata->cleanup(&pdev->dev);
|
|
|
|
free_irq(host->irq, host);
|
|
|
|
if (mmc_slot(host).card_detect_irq)
|
|
|
|
free_irq(mmc_slot(host).card_detect_irq, host);
|
|
|
|
flush_scheduled_work();
|
|
|
|
|
|
|
|
clk_disable(host->fclk);
|
|
|
|
clk_disable(host->iclk);
|
|
|
|
clk_put(host->fclk);
|
|
|
|
clk_put(host->iclk);
|
|
|
|
if (host->dbclk_enabled) {
|
|
|
|
clk_disable(host->dbclk);
|
|
|
|
clk_put(host->dbclk);
|
|
|
|
}
|
|
|
|
|
|
|
|
mmc_free_host(host->mmc);
|
|
|
|
iounmap(host->base);
|
|
|
|
}
|
|
|
|
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
if (res)
|
|
|
|
release_mem_region(res->start, res->end - res->start + 1);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
|
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
struct mmc_omap_host *host = platform_get_drvdata(pdev);
|
|
|
|
|
|
|
|
if (host && host->suspended)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (host) {
|
|
|
|
ret = mmc_suspend_host(host->mmc, state);
|
|
|
|
if (ret == 0) {
|
|
|
|
host->suspended = 1;
|
|
|
|
|
|
|
|
OMAP_HSMMC_WRITE(host->base, ISE, 0);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, IE, 0);
|
|
|
|
|
|
|
|
if (host->pdata->suspend) {
|
|
|
|
ret = host->pdata->suspend(&pdev->dev,
|
|
|
|
host->slot_id);
|
|
|
|
if (ret)
|
|
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
|
|
"Unable to handle MMC board"
|
|
|
|
" level suspend\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
|
|
OMAP_HSMMC_READ(host->base, HCTL)
|
|
|
|
& SDVSCLR);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
|
|
OMAP_HSMMC_READ(host->base, HCTL)
|
|
|
|
| SDVS30);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
|
|
OMAP_HSMMC_READ(host->base, HCTL)
|
|
|
|
| SDBP);
|
|
|
|
}
|
|
|
|
|
|
|
|
clk_disable(host->fclk);
|
|
|
|
clk_disable(host->iclk);
|
|
|
|
clk_disable(host->dbclk);
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Routine to resume the MMC device */
|
|
|
|
static int omap_mmc_resume(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
struct mmc_omap_host *host = platform_get_drvdata(pdev);
|
|
|
|
|
|
|
|
if (host && !host->suspended)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (host) {
|
|
|
|
|
|
|
|
ret = clk_enable(host->fclk);
|
|
|
|
if (ret)
|
|
|
|
goto clk_en_err;
|
|
|
|
|
|
|
|
ret = clk_enable(host->iclk);
|
|
|
|
if (ret) {
|
|
|
|
clk_disable(host->fclk);
|
|
|
|
clk_put(host->fclk);
|
|
|
|
goto clk_en_err;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (clk_enable(host->dbclk) != 0)
|
|
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
|
|
"Enabling debounce clk failed\n");
|
|
|
|
|
|
|
|
if (host->pdata->resume) {
|
|
|
|
ret = host->pdata->resume(&pdev->dev, host->slot_id);
|
|
|
|
if (ret)
|
|
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
|
|
"Unmask interrupt failed\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Notify the core to resume the host */
|
|
|
|
ret = mmc_resume_host(host->mmc);
|
|
|
|
if (ret == 0)
|
|
|
|
host->suspended = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
clk_en_err:
|
|
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
|
|
"Failed to enable MMC clocks during resume\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
|
|
|
#define omap_mmc_suspend NULL
|
|
|
|
#define omap_mmc_resume NULL
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static struct platform_driver omap_mmc_driver = {
|
|
|
|
.probe = omap_mmc_probe,
|
|
|
|
.remove = omap_mmc_remove,
|
|
|
|
.suspend = omap_mmc_suspend,
|
|
|
|
.resume = omap_mmc_resume,
|
|
|
|
.driver = {
|
|
|
|
.name = DRIVER_NAME,
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init omap_mmc_init(void)
|
|
|
|
{
|
|
|
|
/* Register the MMC driver */
|
|
|
|
return platform_driver_register(&omap_mmc_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit omap_mmc_cleanup(void)
|
|
|
|
{
|
|
|
|
/* Unregister MMC driver */
|
|
|
|
platform_driver_unregister(&omap_mmc_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(omap_mmc_init);
|
|
|
|
module_exit(omap_mmc_cleanup);
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|
|
|
|
MODULE_AUTHOR("Texas Instruments Inc");
|