linux_old1/mm/page_owner.c

641 lines
15 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
#include <linux/debugfs.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
mm: remove include/linux/bootmem.h Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:49 +08:00
#include <linux/memblock.h>
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
#include <linux/stacktrace.h>
#include <linux/page_owner.h>
#include <linux/jump_label.h>
mm, page_owner: track and print last migrate reason During migration, page_owner info is now copied with the rest of the page, so the stacktrace leading to free page allocation during migration is overwritten. For debugging purposes, it might be however useful to know that the page has been migrated since its initial allocation. This might happen many times during the lifetime for different reasons and fully tracking this, especially with stacktraces would incur extra memory costs. As a compromise, store and print the migrate_reason of the last migration that occurred to the page. This is enough to distinguish compaction, numa balancing etc. Example page_owner entry after the patch: Page allocated via order 0, mask 0x24200ca(GFP_HIGHUSER_MOVABLE) PFN 628753 type Movable Block 1228 type Movable Flags 0x1fffff80040030(dirty|lru|swapbacked) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b6325>] alloc_pages_vma+0xb5/0x250 [<ffffffff81177491>] shmem_alloc_page+0x61/0x90 [<ffffffff8117a438>] shmem_getpage_gfp+0x678/0x960 [<ffffffff8117c2b9>] shmem_fallocate+0x329/0x440 [<ffffffff811de600>] vfs_fallocate+0x140/0x230 [<ffffffff811df434>] SyS_fallocate+0x44/0x70 [<ffffffff8158cc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 Page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:18 +08:00
#include <linux/migrate.h>
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
#include <linux/stackdepot.h>
#include <linux/seq_file.h>
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
#include "internal.h"
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
/*
* TODO: teach PAGE_OWNER_STACK_DEPTH (__dump_page_owner and save_stack)
* to use off stack temporal storage
*/
#define PAGE_OWNER_STACK_DEPTH (16)
struct page_owner {
unsigned short order;
short last_migrate_reason;
gfp_t gfp_mask;
depot_stack_handle_t handle;
};
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
static bool page_owner_disabled = true;
DEFINE_STATIC_KEY_FALSE(page_owner_inited);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
static depot_stack_handle_t dummy_handle;
static depot_stack_handle_t failure_handle;
mm, page_owner: make init_pages_in_zone() faster In init_pages_in_zone() we currently use the generic set_page_owner() function to initialize page_owner info for early allocated pages. This means we needlessly do lookup_page_ext() twice for each page, and more importantly save_stack(), which has to unwind the stack and find the corresponding stack depot handle. Because the stack is always the same for the initialization, unwind it once in init_pages_in_zone() and reuse the handle. Also avoid the repeated lookup_page_ext(). This can significantly reduce boot times with page_owner=on on large machines, especially for kernels built without frame pointer, where the stack unwinding is noticeably slower. [vbabka@suse.cz: don't duplicate code of __set_page_owner(), per Michal Hocko] [akpm@linux-foundation.org: coding-style fixes] [vbabka@suse.cz: create statically allocated fake stack trace for early allocated pages, per Michal] Link: http://lkml.kernel.org/r/45813564-2342-fc8d-d31a-f4b68a724325@suse.cz Link: http://lkml.kernel.org/r/20170720134029.25268-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 07:20:44 +08:00
static depot_stack_handle_t early_handle;
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
static void init_early_allocated_pages(void);
static int __init early_page_owner_param(char *buf)
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
{
if (!buf)
return -EINVAL;
if (strcmp(buf, "on") == 0)
page_owner_disabled = false;
return 0;
}
early_param("page_owner", early_page_owner_param);
static bool need_page_owner(void)
{
if (page_owner_disabled)
return false;
return true;
}
mm, page_owner: make init_pages_in_zone() faster In init_pages_in_zone() we currently use the generic set_page_owner() function to initialize page_owner info for early allocated pages. This means we needlessly do lookup_page_ext() twice for each page, and more importantly save_stack(), which has to unwind the stack and find the corresponding stack depot handle. Because the stack is always the same for the initialization, unwind it once in init_pages_in_zone() and reuse the handle. Also avoid the repeated lookup_page_ext(). This can significantly reduce boot times with page_owner=on on large machines, especially for kernels built without frame pointer, where the stack unwinding is noticeably slower. [vbabka@suse.cz: don't duplicate code of __set_page_owner(), per Michal Hocko] [akpm@linux-foundation.org: coding-style fixes] [vbabka@suse.cz: create statically allocated fake stack trace for early allocated pages, per Michal] Link: http://lkml.kernel.org/r/45813564-2342-fc8d-d31a-f4b68a724325@suse.cz Link: http://lkml.kernel.org/r/20170720134029.25268-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 07:20:44 +08:00
static __always_inline depot_stack_handle_t create_dummy_stack(void)
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
{
unsigned long entries[4];
struct stack_trace dummy;
dummy.nr_entries = 0;
dummy.max_entries = ARRAY_SIZE(entries);
dummy.entries = &entries[0];
dummy.skip = 0;
save_stack_trace(&dummy);
mm, page_owner: make init_pages_in_zone() faster In init_pages_in_zone() we currently use the generic set_page_owner() function to initialize page_owner info for early allocated pages. This means we needlessly do lookup_page_ext() twice for each page, and more importantly save_stack(), which has to unwind the stack and find the corresponding stack depot handle. Because the stack is always the same for the initialization, unwind it once in init_pages_in_zone() and reuse the handle. Also avoid the repeated lookup_page_ext(). This can significantly reduce boot times with page_owner=on on large machines, especially for kernels built without frame pointer, where the stack unwinding is noticeably slower. [vbabka@suse.cz: don't duplicate code of __set_page_owner(), per Michal Hocko] [akpm@linux-foundation.org: coding-style fixes] [vbabka@suse.cz: create statically allocated fake stack trace for early allocated pages, per Michal] Link: http://lkml.kernel.org/r/45813564-2342-fc8d-d31a-f4b68a724325@suse.cz Link: http://lkml.kernel.org/r/20170720134029.25268-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 07:20:44 +08:00
return depot_save_stack(&dummy, GFP_KERNEL);
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
}
mm, page_owner: make init_pages_in_zone() faster In init_pages_in_zone() we currently use the generic set_page_owner() function to initialize page_owner info for early allocated pages. This means we needlessly do lookup_page_ext() twice for each page, and more importantly save_stack(), which has to unwind the stack and find the corresponding stack depot handle. Because the stack is always the same for the initialization, unwind it once in init_pages_in_zone() and reuse the handle. Also avoid the repeated lookup_page_ext(). This can significantly reduce boot times with page_owner=on on large machines, especially for kernels built without frame pointer, where the stack unwinding is noticeably slower. [vbabka@suse.cz: don't duplicate code of __set_page_owner(), per Michal Hocko] [akpm@linux-foundation.org: coding-style fixes] [vbabka@suse.cz: create statically allocated fake stack trace for early allocated pages, per Michal] Link: http://lkml.kernel.org/r/45813564-2342-fc8d-d31a-f4b68a724325@suse.cz Link: http://lkml.kernel.org/r/20170720134029.25268-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 07:20:44 +08:00
static noinline void register_dummy_stack(void)
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
{
mm, page_owner: make init_pages_in_zone() faster In init_pages_in_zone() we currently use the generic set_page_owner() function to initialize page_owner info for early allocated pages. This means we needlessly do lookup_page_ext() twice for each page, and more importantly save_stack(), which has to unwind the stack and find the corresponding stack depot handle. Because the stack is always the same for the initialization, unwind it once in init_pages_in_zone() and reuse the handle. Also avoid the repeated lookup_page_ext(). This can significantly reduce boot times with page_owner=on on large machines, especially for kernels built without frame pointer, where the stack unwinding is noticeably slower. [vbabka@suse.cz: don't duplicate code of __set_page_owner(), per Michal Hocko] [akpm@linux-foundation.org: coding-style fixes] [vbabka@suse.cz: create statically allocated fake stack trace for early allocated pages, per Michal] Link: http://lkml.kernel.org/r/45813564-2342-fc8d-d31a-f4b68a724325@suse.cz Link: http://lkml.kernel.org/r/20170720134029.25268-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 07:20:44 +08:00
dummy_handle = create_dummy_stack();
}
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
mm, page_owner: make init_pages_in_zone() faster In init_pages_in_zone() we currently use the generic set_page_owner() function to initialize page_owner info for early allocated pages. This means we needlessly do lookup_page_ext() twice for each page, and more importantly save_stack(), which has to unwind the stack and find the corresponding stack depot handle. Because the stack is always the same for the initialization, unwind it once in init_pages_in_zone() and reuse the handle. Also avoid the repeated lookup_page_ext(). This can significantly reduce boot times with page_owner=on on large machines, especially for kernels built without frame pointer, where the stack unwinding is noticeably slower. [vbabka@suse.cz: don't duplicate code of __set_page_owner(), per Michal Hocko] [akpm@linux-foundation.org: coding-style fixes] [vbabka@suse.cz: create statically allocated fake stack trace for early allocated pages, per Michal] Link: http://lkml.kernel.org/r/45813564-2342-fc8d-d31a-f4b68a724325@suse.cz Link: http://lkml.kernel.org/r/20170720134029.25268-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 07:20:44 +08:00
static noinline void register_failure_stack(void)
{
failure_handle = create_dummy_stack();
}
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
mm, page_owner: make init_pages_in_zone() faster In init_pages_in_zone() we currently use the generic set_page_owner() function to initialize page_owner info for early allocated pages. This means we needlessly do lookup_page_ext() twice for each page, and more importantly save_stack(), which has to unwind the stack and find the corresponding stack depot handle. Because the stack is always the same for the initialization, unwind it once in init_pages_in_zone() and reuse the handle. Also avoid the repeated lookup_page_ext(). This can significantly reduce boot times with page_owner=on on large machines, especially for kernels built without frame pointer, where the stack unwinding is noticeably slower. [vbabka@suse.cz: don't duplicate code of __set_page_owner(), per Michal Hocko] [akpm@linux-foundation.org: coding-style fixes] [vbabka@suse.cz: create statically allocated fake stack trace for early allocated pages, per Michal] Link: http://lkml.kernel.org/r/45813564-2342-fc8d-d31a-f4b68a724325@suse.cz Link: http://lkml.kernel.org/r/20170720134029.25268-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 07:20:44 +08:00
static noinline void register_early_stack(void)
{
early_handle = create_dummy_stack();
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
}
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
static void init_page_owner(void)
{
if (page_owner_disabled)
return;
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
register_dummy_stack();
register_failure_stack();
mm, page_owner: make init_pages_in_zone() faster In init_pages_in_zone() we currently use the generic set_page_owner() function to initialize page_owner info for early allocated pages. This means we needlessly do lookup_page_ext() twice for each page, and more importantly save_stack(), which has to unwind the stack and find the corresponding stack depot handle. Because the stack is always the same for the initialization, unwind it once in init_pages_in_zone() and reuse the handle. Also avoid the repeated lookup_page_ext(). This can significantly reduce boot times with page_owner=on on large machines, especially for kernels built without frame pointer, where the stack unwinding is noticeably slower. [vbabka@suse.cz: don't duplicate code of __set_page_owner(), per Michal Hocko] [akpm@linux-foundation.org: coding-style fixes] [vbabka@suse.cz: create statically allocated fake stack trace for early allocated pages, per Michal] Link: http://lkml.kernel.org/r/45813564-2342-fc8d-d31a-f4b68a724325@suse.cz Link: http://lkml.kernel.org/r/20170720134029.25268-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 07:20:44 +08:00
register_early_stack();
static_branch_enable(&page_owner_inited);
init_early_allocated_pages();
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
}
struct page_ext_operations page_owner_ops = {
.size = sizeof(struct page_owner),
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
.need = need_page_owner,
.init = init_page_owner,
};
static inline struct page_owner *get_page_owner(struct page_ext *page_ext)
{
return (void *)page_ext + page_owner_ops.offset;
}
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
void __reset_page_owner(struct page *page, unsigned int order)
{
int i;
struct page_ext *page_ext;
for (i = 0; i < (1 << order); i++) {
page_ext = lookup_page_ext(page + i);
if (unlikely(!page_ext))
continue;
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
__clear_bit(PAGE_EXT_OWNER, &page_ext->flags);
}
}
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
static inline bool check_recursive_alloc(struct stack_trace *trace,
unsigned long ip)
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
{
mm/page_owner: fix recursion bug after changing skip entries This patch fixes commit 5f48f0bd4e36 ("mm, page_owner: skip unnecessary stack_trace entries"). Because if we skip first two entries then logic of checking count value as 2 for recursion is broken and code will go in one depth recursion. so we need to check only one call of _RET_IP(__set_page_owner) while checking for recursion. Current Backtrace while checking for recursion:- (save_stack) from (__set_page_owner) // (But recursion returns true here) (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) // recursion should return true here (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask+) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) Correct Backtrace with fix: (save_stack) from (__set_page_owner) // recursion returned true here (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask+) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) Link: http://lkml.kernel.org/r/1521607043-34670-1-git-send-email-maninder1.s@samsung.com Fixes: 5f48f0bd4e36 ("mm, page_owner: skip unnecessary stack_trace entries") Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Vaneet Narang <v.narang@samsung.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@techadventures.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ayush Mittal <ayush.m@samsung.com> Cc: Prakash Gupta <guptap@codeaurora.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Vasyl Gomonovych <gomonovych@gmail.com> Cc: Amit Sahrawat <a.sahrawat@samsung.com> Cc: <pankaj.m@samsung.com> Cc: Vaneet Narang <v.narang@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-29 07:01:05 +08:00
int i;
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
if (!trace->nr_entries)
return false;
mm/page_owner: fix recursion bug after changing skip entries This patch fixes commit 5f48f0bd4e36 ("mm, page_owner: skip unnecessary stack_trace entries"). Because if we skip first two entries then logic of checking count value as 2 for recursion is broken and code will go in one depth recursion. so we need to check only one call of _RET_IP(__set_page_owner) while checking for recursion. Current Backtrace while checking for recursion:- (save_stack) from (__set_page_owner) // (But recursion returns true here) (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) // recursion should return true here (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask+) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) Correct Backtrace with fix: (save_stack) from (__set_page_owner) // recursion returned true here (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask+) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) Link: http://lkml.kernel.org/r/1521607043-34670-1-git-send-email-maninder1.s@samsung.com Fixes: 5f48f0bd4e36 ("mm, page_owner: skip unnecessary stack_trace entries") Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Vaneet Narang <v.narang@samsung.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@techadventures.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ayush Mittal <ayush.m@samsung.com> Cc: Prakash Gupta <guptap@codeaurora.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Vasyl Gomonovych <gomonovych@gmail.com> Cc: Amit Sahrawat <a.sahrawat@samsung.com> Cc: <pankaj.m@samsung.com> Cc: Vaneet Narang <v.narang@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-29 07:01:05 +08:00
for (i = 0; i < trace->nr_entries; i++) {
if (trace->entries[i] == ip)
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
return true;
}
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
return false;
}
static noinline depot_stack_handle_t save_stack(gfp_t flags)
{
unsigned long entries[PAGE_OWNER_STACK_DEPTH];
struct stack_trace trace = {
.nr_entries = 0,
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
.entries = entries,
.max_entries = PAGE_OWNER_STACK_DEPTH,
.skip = 2
};
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
depot_stack_handle_t handle;
save_stack_trace(&trace);
if (trace.nr_entries != 0 &&
trace.entries[trace.nr_entries-1] == ULONG_MAX)
trace.nr_entries--;
/*
* We need to check recursion here because our request to stackdepot
* could trigger memory allocation to save new entry. New memory
* allocation would reach here and call depot_save_stack() again
* if we don't catch it. There is still not enough memory in stackdepot
* so it would try to allocate memory again and loop forever.
*/
if (check_recursive_alloc(&trace, _RET_IP_))
return dummy_handle;
handle = depot_save_stack(&trace, flags);
if (!handle)
handle = failure_handle;
return handle;
}
mm, page_owner: make init_pages_in_zone() faster In init_pages_in_zone() we currently use the generic set_page_owner() function to initialize page_owner info for early allocated pages. This means we needlessly do lookup_page_ext() twice for each page, and more importantly save_stack(), which has to unwind the stack and find the corresponding stack depot handle. Because the stack is always the same for the initialization, unwind it once in init_pages_in_zone() and reuse the handle. Also avoid the repeated lookup_page_ext(). This can significantly reduce boot times with page_owner=on on large machines, especially for kernels built without frame pointer, where the stack unwinding is noticeably slower. [vbabka@suse.cz: don't duplicate code of __set_page_owner(), per Michal Hocko] [akpm@linux-foundation.org: coding-style fixes] [vbabka@suse.cz: create statically allocated fake stack trace for early allocated pages, per Michal] Link: http://lkml.kernel.org/r/45813564-2342-fc8d-d31a-f4b68a724325@suse.cz Link: http://lkml.kernel.org/r/20170720134029.25268-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 07:20:44 +08:00
static inline void __set_page_owner_handle(struct page_ext *page_ext,
depot_stack_handle_t handle, unsigned int order, gfp_t gfp_mask)
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
{
struct page_owner *page_owner;
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
page_owner = get_page_owner(page_ext);
mm, page_owner: make init_pages_in_zone() faster In init_pages_in_zone() we currently use the generic set_page_owner() function to initialize page_owner info for early allocated pages. This means we needlessly do lookup_page_ext() twice for each page, and more importantly save_stack(), which has to unwind the stack and find the corresponding stack depot handle. Because the stack is always the same for the initialization, unwind it once in init_pages_in_zone() and reuse the handle. Also avoid the repeated lookup_page_ext(). This can significantly reduce boot times with page_owner=on on large machines, especially for kernels built without frame pointer, where the stack unwinding is noticeably slower. [vbabka@suse.cz: don't duplicate code of __set_page_owner(), per Michal Hocko] [akpm@linux-foundation.org: coding-style fixes] [vbabka@suse.cz: create statically allocated fake stack trace for early allocated pages, per Michal] Link: http://lkml.kernel.org/r/45813564-2342-fc8d-d31a-f4b68a724325@suse.cz Link: http://lkml.kernel.org/r/20170720134029.25268-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 07:20:44 +08:00
page_owner->handle = handle;
page_owner->order = order;
page_owner->gfp_mask = gfp_mask;
page_owner->last_migrate_reason = -1;
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
__set_bit(PAGE_EXT_OWNER, &page_ext->flags);
}
mm, page_owner: make init_pages_in_zone() faster In init_pages_in_zone() we currently use the generic set_page_owner() function to initialize page_owner info for early allocated pages. This means we needlessly do lookup_page_ext() twice for each page, and more importantly save_stack(), which has to unwind the stack and find the corresponding stack depot handle. Because the stack is always the same for the initialization, unwind it once in init_pages_in_zone() and reuse the handle. Also avoid the repeated lookup_page_ext(). This can significantly reduce boot times with page_owner=on on large machines, especially for kernels built without frame pointer, where the stack unwinding is noticeably slower. [vbabka@suse.cz: don't duplicate code of __set_page_owner(), per Michal Hocko] [akpm@linux-foundation.org: coding-style fixes] [vbabka@suse.cz: create statically allocated fake stack trace for early allocated pages, per Michal] Link: http://lkml.kernel.org/r/45813564-2342-fc8d-d31a-f4b68a724325@suse.cz Link: http://lkml.kernel.org/r/20170720134029.25268-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 07:20:44 +08:00
noinline void __set_page_owner(struct page *page, unsigned int order,
gfp_t gfp_mask)
{
struct page_ext *page_ext = lookup_page_ext(page);
depot_stack_handle_t handle;
if (unlikely(!page_ext))
return;
handle = save_stack(gfp_mask);
__set_page_owner_handle(page_ext, handle, order, gfp_mask);
}
mm, page_owner: track and print last migrate reason During migration, page_owner info is now copied with the rest of the page, so the stacktrace leading to free page allocation during migration is overwritten. For debugging purposes, it might be however useful to know that the page has been migrated since its initial allocation. This might happen many times during the lifetime for different reasons and fully tracking this, especially with stacktraces would incur extra memory costs. As a compromise, store and print the migrate_reason of the last migration that occurred to the page. This is enough to distinguish compaction, numa balancing etc. Example page_owner entry after the patch: Page allocated via order 0, mask 0x24200ca(GFP_HIGHUSER_MOVABLE) PFN 628753 type Movable Block 1228 type Movable Flags 0x1fffff80040030(dirty|lru|swapbacked) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b6325>] alloc_pages_vma+0xb5/0x250 [<ffffffff81177491>] shmem_alloc_page+0x61/0x90 [<ffffffff8117a438>] shmem_getpage_gfp+0x678/0x960 [<ffffffff8117c2b9>] shmem_fallocate+0x329/0x440 [<ffffffff811de600>] vfs_fallocate+0x140/0x230 [<ffffffff811df434>] SyS_fallocate+0x44/0x70 [<ffffffff8158cc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 Page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:18 +08:00
void __set_page_owner_migrate_reason(struct page *page, int reason)
{
struct page_ext *page_ext = lookup_page_ext(page);
struct page_owner *page_owner;
if (unlikely(!page_ext))
return;
mm, page_owner: track and print last migrate reason During migration, page_owner info is now copied with the rest of the page, so the stacktrace leading to free page allocation during migration is overwritten. For debugging purposes, it might be however useful to know that the page has been migrated since its initial allocation. This might happen many times during the lifetime for different reasons and fully tracking this, especially with stacktraces would incur extra memory costs. As a compromise, store and print the migrate_reason of the last migration that occurred to the page. This is enough to distinguish compaction, numa balancing etc. Example page_owner entry after the patch: Page allocated via order 0, mask 0x24200ca(GFP_HIGHUSER_MOVABLE) PFN 628753 type Movable Block 1228 type Movable Flags 0x1fffff80040030(dirty|lru|swapbacked) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b6325>] alloc_pages_vma+0xb5/0x250 [<ffffffff81177491>] shmem_alloc_page+0x61/0x90 [<ffffffff8117a438>] shmem_getpage_gfp+0x678/0x960 [<ffffffff8117c2b9>] shmem_fallocate+0x329/0x440 [<ffffffff811de600>] vfs_fallocate+0x140/0x230 [<ffffffff811df434>] SyS_fallocate+0x44/0x70 [<ffffffff8158cc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 Page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:18 +08:00
page_owner = get_page_owner(page_ext);
page_owner->last_migrate_reason = reason;
mm, page_owner: track and print last migrate reason During migration, page_owner info is now copied with the rest of the page, so the stacktrace leading to free page allocation during migration is overwritten. For debugging purposes, it might be however useful to know that the page has been migrated since its initial allocation. This might happen many times during the lifetime for different reasons and fully tracking this, especially with stacktraces would incur extra memory costs. As a compromise, store and print the migrate_reason of the last migration that occurred to the page. This is enough to distinguish compaction, numa balancing etc. Example page_owner entry after the patch: Page allocated via order 0, mask 0x24200ca(GFP_HIGHUSER_MOVABLE) PFN 628753 type Movable Block 1228 type Movable Flags 0x1fffff80040030(dirty|lru|swapbacked) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b6325>] alloc_pages_vma+0xb5/0x250 [<ffffffff81177491>] shmem_alloc_page+0x61/0x90 [<ffffffff8117a438>] shmem_getpage_gfp+0x678/0x960 [<ffffffff8117c2b9>] shmem_fallocate+0x329/0x440 [<ffffffff811de600>] vfs_fallocate+0x140/0x230 [<ffffffff811df434>] SyS_fallocate+0x44/0x70 [<ffffffff8158cc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 Page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:18 +08:00
}
void __split_page_owner(struct page *page, unsigned int order)
{
int i;
struct page_ext *page_ext = lookup_page_ext(page);
struct page_owner *page_owner;
if (unlikely(!page_ext))
return;
page_owner = get_page_owner(page_ext);
page_owner->order = 0;
for (i = 1; i < (1 << order); i++)
__copy_page_owner(page, page + i);
}
void __copy_page_owner(struct page *oldpage, struct page *newpage)
{
struct page_ext *old_ext = lookup_page_ext(oldpage);
struct page_ext *new_ext = lookup_page_ext(newpage);
struct page_owner *old_page_owner, *new_page_owner;
if (unlikely(!old_ext || !new_ext))
return;
old_page_owner = get_page_owner(old_ext);
new_page_owner = get_page_owner(new_ext);
new_page_owner->order = old_page_owner->order;
new_page_owner->gfp_mask = old_page_owner->gfp_mask;
new_page_owner->last_migrate_reason =
old_page_owner->last_migrate_reason;
new_page_owner->handle = old_page_owner->handle;
/*
* We don't clear the bit on the oldpage as it's going to be freed
* after migration. Until then, the info can be useful in case of
* a bug, and the overal stats will be off a bit only temporarily.
* Also, migrate_misplaced_transhuge_page() can still fail the
* migration and then we want the oldpage to retain the info. But
* in that case we also don't need to explicitly clear the info from
* the new page, which will be freed.
*/
__set_bit(PAGE_EXT_OWNER, &new_ext->flags);
}
void pagetypeinfo_showmixedcount_print(struct seq_file *m,
pg_data_t *pgdat, struct zone *zone)
{
struct page *page;
struct page_ext *page_ext;
struct page_owner *page_owner;
unsigned long pfn = zone->zone_start_pfn, block_end_pfn;
unsigned long end_pfn = pfn + zone->spanned_pages;
unsigned long count[MIGRATE_TYPES] = { 0, };
int pageblock_mt, page_mt;
int i;
/* Scan block by block. First and last block may be incomplete */
pfn = zone->zone_start_pfn;
/*
* Walk the zone in pageblock_nr_pages steps. If a page block spans
* a zone boundary, it will be double counted between zones. This does
* not matter as the mixed block count will still be correct
*/
for (; pfn < end_pfn; ) {
if (!pfn_valid(pfn)) {
pfn = ALIGN(pfn + 1, MAX_ORDER_NR_PAGES);
continue;
}
block_end_pfn = ALIGN(pfn + 1, pageblock_nr_pages);
block_end_pfn = min(block_end_pfn, end_pfn);
page = pfn_to_page(pfn);
pageblock_mt = get_pageblock_migratetype(page);
for (; pfn < block_end_pfn; pfn++) {
if (!pfn_valid_within(pfn))
continue;
page = pfn_to_page(pfn);
if (page_zone(page) != zone)
continue;
if (PageBuddy(page)) {
unsigned long freepage_order;
freepage_order = page_order_unsafe(page);
if (freepage_order < MAX_ORDER)
pfn += (1UL << freepage_order) - 1;
continue;
}
if (PageReserved(page))
continue;
page_ext = lookup_page_ext(page);
if (unlikely(!page_ext))
continue;
if (!test_bit(PAGE_EXT_OWNER, &page_ext->flags))
continue;
page_owner = get_page_owner(page_ext);
page_mt = gfpflags_to_migratetype(
page_owner->gfp_mask);
if (pageblock_mt != page_mt) {
if (is_migrate_cma(pageblock_mt))
count[MIGRATE_MOVABLE]++;
else
count[pageblock_mt]++;
pfn = block_end_pfn;
break;
}
pfn += (1UL << page_owner->order) - 1;
}
}
/* Print counts */
seq_printf(m, "Node %d, zone %8s ", pgdat->node_id, zone->name);
for (i = 0; i < MIGRATE_TYPES; i++)
seq_printf(m, "%12lu ", count[i]);
seq_putc(m, '\n');
}
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
static ssize_t
print_page_owner(char __user *buf, size_t count, unsigned long pfn,
struct page *page, struct page_owner *page_owner,
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
depot_stack_handle_t handle)
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
{
int ret;
int pageblock_mt, page_mt;
char *kbuf;
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
unsigned long entries[PAGE_OWNER_STACK_DEPTH];
struct stack_trace trace = {
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
.nr_entries = 0,
.entries = entries,
.max_entries = PAGE_OWNER_STACK_DEPTH,
.skip = 0
};
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
count = min_t(size_t, count, PAGE_SIZE);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
kbuf = kmalloc(count, GFP_KERNEL);
if (!kbuf)
return -ENOMEM;
ret = snprintf(kbuf, count,
mm, page_owner: print migratetype of page and pageblock, symbolic flags The information in /sys/kernel/debug/page_owner includes the migratetype of the pageblock the page belongs to. This is also checked against the page's migratetype (as declared by gfp_flags during its allocation), and the page is reported as Fallback if its migratetype differs from the pageblock's one. t This is somewhat misleading because in fact fallback allocation is not the only reason why these two can differ. It also doesn't direcly provide the page's migratetype, although it's possible to derive that from the gfp_flags. It's arguably better to print both page and pageblock's migratetype and leave the interpretation to the consumer than to suggest fallback allocation as the only possible reason. While at it, we can print the migratetypes as string the same way as /proc/pagetypeinfo does, as some of the numeric values depend on kernel configuration. For that, this patch moves the migratetype_names array from #ifdef CONFIG_PROC_FS part of mm/vmstat.c to mm/page_alloc.c and exports it. With the new format strings for flags, we can now also provide symbolic page and gfp flags in the /sys/kernel/debug/page_owner file. This replaces the positional printing of page flags as single letters, which might have looked nicer, but was limited to a subset of flags, and required the user to remember the letters. Example page_owner entry after the patch: Page allocated via order 0, mask 0x24213ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD|__GFP_NOWARN|__GFP_NORETRY) PFN 520 type Movable Block 1 type Movable Flags 0xfffff8001006c(referenced|uptodate|lru|active|mappedtodisk) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b4058>] alloc_pages_current+0x88/0x120 [<ffffffff8115e386>] __page_cache_alloc+0xe6/0x120 [<ffffffff8116ba6c>] __do_page_cache_readahead+0xdc/0x240 [<ffffffff8116bd05>] ondemand_readahead+0x135/0x260 [<ffffffff8116bfb1>] page_cache_sync_readahead+0x31/0x50 [<ffffffff81160523>] generic_file_read_iter+0x453/0x760 [<ffffffff811e0d57>] __vfs_read+0xa7/0xd0 Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:08 +08:00
"Page allocated via order %u, mask %#x(%pGg)\n",
page_owner->order, page_owner->gfp_mask,
&page_owner->gfp_mask);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
if (ret >= count)
goto err;
/* Print information relevant to grouping pages by mobility */
pageblock_mt = get_pageblock_migratetype(page);
page_mt = gfpflags_to_migratetype(page_owner->gfp_mask);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
ret += snprintf(kbuf + ret, count - ret,
mm, page_owner: print migratetype of page and pageblock, symbolic flags The information in /sys/kernel/debug/page_owner includes the migratetype of the pageblock the page belongs to. This is also checked against the page's migratetype (as declared by gfp_flags during its allocation), and the page is reported as Fallback if its migratetype differs from the pageblock's one. t This is somewhat misleading because in fact fallback allocation is not the only reason why these two can differ. It also doesn't direcly provide the page's migratetype, although it's possible to derive that from the gfp_flags. It's arguably better to print both page and pageblock's migratetype and leave the interpretation to the consumer than to suggest fallback allocation as the only possible reason. While at it, we can print the migratetypes as string the same way as /proc/pagetypeinfo does, as some of the numeric values depend on kernel configuration. For that, this patch moves the migratetype_names array from #ifdef CONFIG_PROC_FS part of mm/vmstat.c to mm/page_alloc.c and exports it. With the new format strings for flags, we can now also provide symbolic page and gfp flags in the /sys/kernel/debug/page_owner file. This replaces the positional printing of page flags as single letters, which might have looked nicer, but was limited to a subset of flags, and required the user to remember the letters. Example page_owner entry after the patch: Page allocated via order 0, mask 0x24213ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD|__GFP_NOWARN|__GFP_NORETRY) PFN 520 type Movable Block 1 type Movable Flags 0xfffff8001006c(referenced|uptodate|lru|active|mappedtodisk) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b4058>] alloc_pages_current+0x88/0x120 [<ffffffff8115e386>] __page_cache_alloc+0xe6/0x120 [<ffffffff8116ba6c>] __do_page_cache_readahead+0xdc/0x240 [<ffffffff8116bd05>] ondemand_readahead+0x135/0x260 [<ffffffff8116bfb1>] page_cache_sync_readahead+0x31/0x50 [<ffffffff81160523>] generic_file_read_iter+0x453/0x760 [<ffffffff811e0d57>] __vfs_read+0xa7/0xd0 Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:08 +08:00
"PFN %lu type %s Block %lu type %s Flags %#lx(%pGp)\n",
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
pfn,
mm, page_owner: print migratetype of page and pageblock, symbolic flags The information in /sys/kernel/debug/page_owner includes the migratetype of the pageblock the page belongs to. This is also checked against the page's migratetype (as declared by gfp_flags during its allocation), and the page is reported as Fallback if its migratetype differs from the pageblock's one. t This is somewhat misleading because in fact fallback allocation is not the only reason why these two can differ. It also doesn't direcly provide the page's migratetype, although it's possible to derive that from the gfp_flags. It's arguably better to print both page and pageblock's migratetype and leave the interpretation to the consumer than to suggest fallback allocation as the only possible reason. While at it, we can print the migratetypes as string the same way as /proc/pagetypeinfo does, as some of the numeric values depend on kernel configuration. For that, this patch moves the migratetype_names array from #ifdef CONFIG_PROC_FS part of mm/vmstat.c to mm/page_alloc.c and exports it. With the new format strings for flags, we can now also provide symbolic page and gfp flags in the /sys/kernel/debug/page_owner file. This replaces the positional printing of page flags as single letters, which might have looked nicer, but was limited to a subset of flags, and required the user to remember the letters. Example page_owner entry after the patch: Page allocated via order 0, mask 0x24213ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD|__GFP_NOWARN|__GFP_NORETRY) PFN 520 type Movable Block 1 type Movable Flags 0xfffff8001006c(referenced|uptodate|lru|active|mappedtodisk) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b4058>] alloc_pages_current+0x88/0x120 [<ffffffff8115e386>] __page_cache_alloc+0xe6/0x120 [<ffffffff8116ba6c>] __do_page_cache_readahead+0xdc/0x240 [<ffffffff8116bd05>] ondemand_readahead+0x135/0x260 [<ffffffff8116bfb1>] page_cache_sync_readahead+0x31/0x50 [<ffffffff81160523>] generic_file_read_iter+0x453/0x760 [<ffffffff811e0d57>] __vfs_read+0xa7/0xd0 Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:08 +08:00
migratetype_names[page_mt],
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
pfn >> pageblock_order,
mm, page_owner: print migratetype of page and pageblock, symbolic flags The information in /sys/kernel/debug/page_owner includes the migratetype of the pageblock the page belongs to. This is also checked against the page's migratetype (as declared by gfp_flags during its allocation), and the page is reported as Fallback if its migratetype differs from the pageblock's one. t This is somewhat misleading because in fact fallback allocation is not the only reason why these two can differ. It also doesn't direcly provide the page's migratetype, although it's possible to derive that from the gfp_flags. It's arguably better to print both page and pageblock's migratetype and leave the interpretation to the consumer than to suggest fallback allocation as the only possible reason. While at it, we can print the migratetypes as string the same way as /proc/pagetypeinfo does, as some of the numeric values depend on kernel configuration. For that, this patch moves the migratetype_names array from #ifdef CONFIG_PROC_FS part of mm/vmstat.c to mm/page_alloc.c and exports it. With the new format strings for flags, we can now also provide symbolic page and gfp flags in the /sys/kernel/debug/page_owner file. This replaces the positional printing of page flags as single letters, which might have looked nicer, but was limited to a subset of flags, and required the user to remember the letters. Example page_owner entry after the patch: Page allocated via order 0, mask 0x24213ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD|__GFP_NOWARN|__GFP_NORETRY) PFN 520 type Movable Block 1 type Movable Flags 0xfffff8001006c(referenced|uptodate|lru|active|mappedtodisk) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b4058>] alloc_pages_current+0x88/0x120 [<ffffffff8115e386>] __page_cache_alloc+0xe6/0x120 [<ffffffff8116ba6c>] __do_page_cache_readahead+0xdc/0x240 [<ffffffff8116bd05>] ondemand_readahead+0x135/0x260 [<ffffffff8116bfb1>] page_cache_sync_readahead+0x31/0x50 [<ffffffff81160523>] generic_file_read_iter+0x453/0x760 [<ffffffff811e0d57>] __vfs_read+0xa7/0xd0 Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:08 +08:00
migratetype_names[pageblock_mt],
page->flags, &page->flags);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
if (ret >= count)
goto err;
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
depot_fetch_stack(handle, &trace);
ret += snprint_stack_trace(kbuf + ret, count - ret, &trace, 0);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
if (ret >= count)
goto err;
if (page_owner->last_migrate_reason != -1) {
mm, page_owner: track and print last migrate reason During migration, page_owner info is now copied with the rest of the page, so the stacktrace leading to free page allocation during migration is overwritten. For debugging purposes, it might be however useful to know that the page has been migrated since its initial allocation. This might happen many times during the lifetime for different reasons and fully tracking this, especially with stacktraces would incur extra memory costs. As a compromise, store and print the migrate_reason of the last migration that occurred to the page. This is enough to distinguish compaction, numa balancing etc. Example page_owner entry after the patch: Page allocated via order 0, mask 0x24200ca(GFP_HIGHUSER_MOVABLE) PFN 628753 type Movable Block 1228 type Movable Flags 0x1fffff80040030(dirty|lru|swapbacked) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b6325>] alloc_pages_vma+0xb5/0x250 [<ffffffff81177491>] shmem_alloc_page+0x61/0x90 [<ffffffff8117a438>] shmem_getpage_gfp+0x678/0x960 [<ffffffff8117c2b9>] shmem_fallocate+0x329/0x440 [<ffffffff811de600>] vfs_fallocate+0x140/0x230 [<ffffffff811df434>] SyS_fallocate+0x44/0x70 [<ffffffff8158cc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 Page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:18 +08:00
ret += snprintf(kbuf + ret, count - ret,
"Page has been migrated, last migrate reason: %s\n",
migrate_reason_names[page_owner->last_migrate_reason]);
mm, page_owner: track and print last migrate reason During migration, page_owner info is now copied with the rest of the page, so the stacktrace leading to free page allocation during migration is overwritten. For debugging purposes, it might be however useful to know that the page has been migrated since its initial allocation. This might happen many times during the lifetime for different reasons and fully tracking this, especially with stacktraces would incur extra memory costs. As a compromise, store and print the migrate_reason of the last migration that occurred to the page. This is enough to distinguish compaction, numa balancing etc. Example page_owner entry after the patch: Page allocated via order 0, mask 0x24200ca(GFP_HIGHUSER_MOVABLE) PFN 628753 type Movable Block 1228 type Movable Flags 0x1fffff80040030(dirty|lru|swapbacked) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b6325>] alloc_pages_vma+0xb5/0x250 [<ffffffff81177491>] shmem_alloc_page+0x61/0x90 [<ffffffff8117a438>] shmem_getpage_gfp+0x678/0x960 [<ffffffff8117c2b9>] shmem_fallocate+0x329/0x440 [<ffffffff811de600>] vfs_fallocate+0x140/0x230 [<ffffffff811df434>] SyS_fallocate+0x44/0x70 [<ffffffff8158cc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 Page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:18 +08:00
if (ret >= count)
goto err;
}
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
ret += snprintf(kbuf + ret, count - ret, "\n");
if (ret >= count)
goto err;
if (copy_to_user(buf, kbuf, ret))
ret = -EFAULT;
kfree(kbuf);
return ret;
err:
kfree(kbuf);
return -ENOMEM;
}
mm, page_owner: dump page owner info from dump_page() The page_owner mechanism is useful for dealing with memory leaks. By reading /sys/kernel/debug/page_owner one can determine the stack traces leading to allocations of all pages, and find e.g. a buggy driver. This information might be also potentially useful for debugging, such as the VM_BUG_ON_PAGE() calls to dump_page(). So let's print the stored info from dump_page(). Example output: page:ffffea000292f1c0 count:1 mapcount:0 mapping:ffff8800b2f6cc18 index:0x91d flags: 0x1fffff8001002c(referenced|uptodate|lru|mappedtodisk) page dumped because: VM_BUG_ON_PAGE(1) page->mem_cgroup:ffff8801392c5000 page allocated via order 0, migratetype Movable, gfp_mask 0x24213ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD|__GFP_NOWARN|__GFP_NORETRY) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b40c8>] alloc_pages_current+0x88/0x120 [<ffffffff8115e386>] __page_cache_alloc+0xe6/0x120 [<ffffffff8116ba6c>] __do_page_cache_readahead+0xdc/0x240 [<ffffffff8116bd05>] ondemand_readahead+0x135/0x260 [<ffffffff8116be9c>] page_cache_async_readahead+0x6c/0x70 [<ffffffff811604c2>] generic_file_read_iter+0x3f2/0x760 [<ffffffff811e0dc7>] __vfs_read+0xa7/0xd0 page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:21 +08:00
void __dump_page_owner(struct page *page)
{
struct page_ext *page_ext = lookup_page_ext(page);
struct page_owner *page_owner;
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
unsigned long entries[PAGE_OWNER_STACK_DEPTH];
mm, page_owner: dump page owner info from dump_page() The page_owner mechanism is useful for dealing with memory leaks. By reading /sys/kernel/debug/page_owner one can determine the stack traces leading to allocations of all pages, and find e.g. a buggy driver. This information might be also potentially useful for debugging, such as the VM_BUG_ON_PAGE() calls to dump_page(). So let's print the stored info from dump_page(). Example output: page:ffffea000292f1c0 count:1 mapcount:0 mapping:ffff8800b2f6cc18 index:0x91d flags: 0x1fffff8001002c(referenced|uptodate|lru|mappedtodisk) page dumped because: VM_BUG_ON_PAGE(1) page->mem_cgroup:ffff8801392c5000 page allocated via order 0, migratetype Movable, gfp_mask 0x24213ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD|__GFP_NOWARN|__GFP_NORETRY) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b40c8>] alloc_pages_current+0x88/0x120 [<ffffffff8115e386>] __page_cache_alloc+0xe6/0x120 [<ffffffff8116ba6c>] __do_page_cache_readahead+0xdc/0x240 [<ffffffff8116bd05>] ondemand_readahead+0x135/0x260 [<ffffffff8116be9c>] page_cache_async_readahead+0x6c/0x70 [<ffffffff811604c2>] generic_file_read_iter+0x3f2/0x760 [<ffffffff811e0dc7>] __vfs_read+0xa7/0xd0 page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:21 +08:00
struct stack_trace trace = {
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
.nr_entries = 0,
.entries = entries,
.max_entries = PAGE_OWNER_STACK_DEPTH,
.skip = 0
mm, page_owner: dump page owner info from dump_page() The page_owner mechanism is useful for dealing with memory leaks. By reading /sys/kernel/debug/page_owner one can determine the stack traces leading to allocations of all pages, and find e.g. a buggy driver. This information might be also potentially useful for debugging, such as the VM_BUG_ON_PAGE() calls to dump_page(). So let's print the stored info from dump_page(). Example output: page:ffffea000292f1c0 count:1 mapcount:0 mapping:ffff8800b2f6cc18 index:0x91d flags: 0x1fffff8001002c(referenced|uptodate|lru|mappedtodisk) page dumped because: VM_BUG_ON_PAGE(1) page->mem_cgroup:ffff8801392c5000 page allocated via order 0, migratetype Movable, gfp_mask 0x24213ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD|__GFP_NOWARN|__GFP_NORETRY) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b40c8>] alloc_pages_current+0x88/0x120 [<ffffffff8115e386>] __page_cache_alloc+0xe6/0x120 [<ffffffff8116ba6c>] __do_page_cache_readahead+0xdc/0x240 [<ffffffff8116bd05>] ondemand_readahead+0x135/0x260 [<ffffffff8116be9c>] page_cache_async_readahead+0x6c/0x70 [<ffffffff811604c2>] generic_file_read_iter+0x3f2/0x760 [<ffffffff811e0dc7>] __vfs_read+0xa7/0xd0 page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:21 +08:00
};
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
depot_stack_handle_t handle;
gfp_t gfp_mask;
int mt;
mm, page_owner: dump page owner info from dump_page() The page_owner mechanism is useful for dealing with memory leaks. By reading /sys/kernel/debug/page_owner one can determine the stack traces leading to allocations of all pages, and find e.g. a buggy driver. This information might be also potentially useful for debugging, such as the VM_BUG_ON_PAGE() calls to dump_page(). So let's print the stored info from dump_page(). Example output: page:ffffea000292f1c0 count:1 mapcount:0 mapping:ffff8800b2f6cc18 index:0x91d flags: 0x1fffff8001002c(referenced|uptodate|lru|mappedtodisk) page dumped because: VM_BUG_ON_PAGE(1) page->mem_cgroup:ffff8801392c5000 page allocated via order 0, migratetype Movable, gfp_mask 0x24213ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD|__GFP_NOWARN|__GFP_NORETRY) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b40c8>] alloc_pages_current+0x88/0x120 [<ffffffff8115e386>] __page_cache_alloc+0xe6/0x120 [<ffffffff8116ba6c>] __do_page_cache_readahead+0xdc/0x240 [<ffffffff8116bd05>] ondemand_readahead+0x135/0x260 [<ffffffff8116be9c>] page_cache_async_readahead+0x6c/0x70 [<ffffffff811604c2>] generic_file_read_iter+0x3f2/0x760 [<ffffffff811e0dc7>] __vfs_read+0xa7/0xd0 page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:21 +08:00
if (unlikely(!page_ext)) {
pr_alert("There is not page extension available.\n");
return;
}
page_owner = get_page_owner(page_ext);
gfp_mask = page_owner->gfp_mask;
mt = gfpflags_to_migratetype(gfp_mask);
mm, page_owner: dump page owner info from dump_page() The page_owner mechanism is useful for dealing with memory leaks. By reading /sys/kernel/debug/page_owner one can determine the stack traces leading to allocations of all pages, and find e.g. a buggy driver. This information might be also potentially useful for debugging, such as the VM_BUG_ON_PAGE() calls to dump_page(). So let's print the stored info from dump_page(). Example output: page:ffffea000292f1c0 count:1 mapcount:0 mapping:ffff8800b2f6cc18 index:0x91d flags: 0x1fffff8001002c(referenced|uptodate|lru|mappedtodisk) page dumped because: VM_BUG_ON_PAGE(1) page->mem_cgroup:ffff8801392c5000 page allocated via order 0, migratetype Movable, gfp_mask 0x24213ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD|__GFP_NOWARN|__GFP_NORETRY) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b40c8>] alloc_pages_current+0x88/0x120 [<ffffffff8115e386>] __page_cache_alloc+0xe6/0x120 [<ffffffff8116ba6c>] __do_page_cache_readahead+0xdc/0x240 [<ffffffff8116bd05>] ondemand_readahead+0x135/0x260 [<ffffffff8116be9c>] page_cache_async_readahead+0x6c/0x70 [<ffffffff811604c2>] generic_file_read_iter+0x3f2/0x760 [<ffffffff811e0dc7>] __vfs_read+0xa7/0xd0 page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:21 +08:00
if (!test_bit(PAGE_EXT_OWNER, &page_ext->flags)) {
pr_alert("page_owner info is not active (free page?)\n");
return;
}
handle = READ_ONCE(page_owner->handle);
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
if (!handle) {
pr_alert("page_owner info is not active (free page?)\n");
return;
}
depot_fetch_stack(handle, &trace);
pr_alert("page allocated via order %u, migratetype %s, gfp_mask %#x(%pGg)\n",
page_owner->order, migratetype_names[mt], gfp_mask, &gfp_mask);
mm, page_owner: dump page owner info from dump_page() The page_owner mechanism is useful for dealing with memory leaks. By reading /sys/kernel/debug/page_owner one can determine the stack traces leading to allocations of all pages, and find e.g. a buggy driver. This information might be also potentially useful for debugging, such as the VM_BUG_ON_PAGE() calls to dump_page(). So let's print the stored info from dump_page(). Example output: page:ffffea000292f1c0 count:1 mapcount:0 mapping:ffff8800b2f6cc18 index:0x91d flags: 0x1fffff8001002c(referenced|uptodate|lru|mappedtodisk) page dumped because: VM_BUG_ON_PAGE(1) page->mem_cgroup:ffff8801392c5000 page allocated via order 0, migratetype Movable, gfp_mask 0x24213ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD|__GFP_NOWARN|__GFP_NORETRY) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b40c8>] alloc_pages_current+0x88/0x120 [<ffffffff8115e386>] __page_cache_alloc+0xe6/0x120 [<ffffffff8116ba6c>] __do_page_cache_readahead+0xdc/0x240 [<ffffffff8116bd05>] ondemand_readahead+0x135/0x260 [<ffffffff8116be9c>] page_cache_async_readahead+0x6c/0x70 [<ffffffff811604c2>] generic_file_read_iter+0x3f2/0x760 [<ffffffff811e0dc7>] __vfs_read+0xa7/0xd0 page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:21 +08:00
print_stack_trace(&trace, 0);
if (page_owner->last_migrate_reason != -1)
mm, page_owner: dump page owner info from dump_page() The page_owner mechanism is useful for dealing with memory leaks. By reading /sys/kernel/debug/page_owner one can determine the stack traces leading to allocations of all pages, and find e.g. a buggy driver. This information might be also potentially useful for debugging, such as the VM_BUG_ON_PAGE() calls to dump_page(). So let's print the stored info from dump_page(). Example output: page:ffffea000292f1c0 count:1 mapcount:0 mapping:ffff8800b2f6cc18 index:0x91d flags: 0x1fffff8001002c(referenced|uptodate|lru|mappedtodisk) page dumped because: VM_BUG_ON_PAGE(1) page->mem_cgroup:ffff8801392c5000 page allocated via order 0, migratetype Movable, gfp_mask 0x24213ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD|__GFP_NOWARN|__GFP_NORETRY) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b40c8>] alloc_pages_current+0x88/0x120 [<ffffffff8115e386>] __page_cache_alloc+0xe6/0x120 [<ffffffff8116ba6c>] __do_page_cache_readahead+0xdc/0x240 [<ffffffff8116bd05>] ondemand_readahead+0x135/0x260 [<ffffffff8116be9c>] page_cache_async_readahead+0x6c/0x70 [<ffffffff811604c2>] generic_file_read_iter+0x3f2/0x760 [<ffffffff811e0dc7>] __vfs_read+0xa7/0xd0 page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:21 +08:00
pr_alert("page has been migrated, last migrate reason: %s\n",
migrate_reason_names[page_owner->last_migrate_reason]);
mm, page_owner: dump page owner info from dump_page() The page_owner mechanism is useful for dealing with memory leaks. By reading /sys/kernel/debug/page_owner one can determine the stack traces leading to allocations of all pages, and find e.g. a buggy driver. This information might be also potentially useful for debugging, such as the VM_BUG_ON_PAGE() calls to dump_page(). So let's print the stored info from dump_page(). Example output: page:ffffea000292f1c0 count:1 mapcount:0 mapping:ffff8800b2f6cc18 index:0x91d flags: 0x1fffff8001002c(referenced|uptodate|lru|mappedtodisk) page dumped because: VM_BUG_ON_PAGE(1) page->mem_cgroup:ffff8801392c5000 page allocated via order 0, migratetype Movable, gfp_mask 0x24213ca(GFP_HIGHUSER_MOVABLE|__GFP_COLD|__GFP_NOWARN|__GFP_NORETRY) [<ffffffff811682c4>] __alloc_pages_nodemask+0x134/0x230 [<ffffffff811b40c8>] alloc_pages_current+0x88/0x120 [<ffffffff8115e386>] __page_cache_alloc+0xe6/0x120 [<ffffffff8116ba6c>] __do_page_cache_readahead+0xdc/0x240 [<ffffffff8116bd05>] ondemand_readahead+0x135/0x260 [<ffffffff8116be9c>] page_cache_async_readahead+0x6c/0x70 [<ffffffff811604c2>] generic_file_read_iter+0x3f2/0x760 [<ffffffff811e0dc7>] __vfs_read+0xa7/0xd0 page has been migrated, last migrate reason: compaction Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:56:21 +08:00
}
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
static ssize_t
read_page_owner(struct file *file, char __user *buf, size_t count, loff_t *ppos)
{
unsigned long pfn;
struct page *page;
struct page_ext *page_ext;
struct page_owner *page_owner;
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
depot_stack_handle_t handle;
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
if (!static_branch_unlikely(&page_owner_inited))
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
return -EINVAL;
page = NULL;
pfn = min_low_pfn + *ppos;
/* Find a valid PFN or the start of a MAX_ORDER_NR_PAGES area */
while (!pfn_valid(pfn) && (pfn & (MAX_ORDER_NR_PAGES - 1)) != 0)
pfn++;
drain_all_pages(NULL);
/* Find an allocated page */
for (; pfn < max_pfn; pfn++) {
/*
* If the new page is in a new MAX_ORDER_NR_PAGES area,
* validate the area as existing, skip it if not
*/
if ((pfn & (MAX_ORDER_NR_PAGES - 1)) == 0 && !pfn_valid(pfn)) {
pfn += MAX_ORDER_NR_PAGES - 1;
continue;
}
/* Check for holes within a MAX_ORDER area */
if (!pfn_valid_within(pfn))
continue;
page = pfn_to_page(pfn);
if (PageBuddy(page)) {
unsigned long freepage_order = page_order_unsafe(page);
if (freepage_order < MAX_ORDER)
pfn += (1UL << freepage_order) - 1;
continue;
}
page_ext = lookup_page_ext(page);
if (unlikely(!page_ext))
continue;
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
/*
* Some pages could be missed by concurrent allocation or free,
* because we don't hold the zone lock.
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
*/
if (!test_bit(PAGE_EXT_OWNER, &page_ext->flags))
continue;
page_owner = get_page_owner(page_ext);
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
/*
* Access to page_ext->handle isn't synchronous so we should
* be careful to access it.
*/
handle = READ_ONCE(page_owner->handle);
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
if (!handle)
continue;
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
/* Record the next PFN to read in the file offset */
*ppos = (pfn - min_low_pfn) + 1;
mm/page_owner: use stackdepot to store stacktrace Currently, we store each page's allocation stacktrace on corresponding page_ext structure and it requires a lot of memory. This causes the problem that memory tight system doesn't work well if page_owner is enabled. Moreover, even with this large memory consumption, we cannot get full stacktrace because we allocate memory at boot time and just maintain 8 stacktrace slots to balance memory consumption. We could increase it to more but it would make system unusable or change system behaviour. To solve the problem, this patch uses stackdepot to store stacktrace. It obviously provides memory saving but there is a drawback that stackdepot could fail. stackdepot allocates memory at runtime so it could fail if system has not enough memory. But, most of allocation stack are generated at very early time and there are much memory at this time. So, failure would not happen easily. And, one failure means that we miss just one page's allocation stacktrace so it would not be a big problem. In this patch, when memory allocation failure happens, we store special stracktrace handle to the page that is failed to save stacktrace. With it, user can guess memory usage properly even if failure happens. Memory saving looks as following. (4GB memory system with page_owner) (before the patch -> after the patch) static allocation: 92274688 bytes -> 25165824 bytes dynamic allocation after boot + kernel build: 0 bytes -> 327680 bytes total: 92274688 bytes -> 25493504 bytes 72% reduction in total. Note that implementation looks complex than someone would imagine because there is recursion issue. stackdepot uses page allocator and page_owner is called at page allocation. Using stackdepot in page_owner could re-call page allcator and then page_owner. That is a recursion. To detect and avoid it, whenever we obtain stacktrace, recursion is checked and page_owner is set to dummy information if found. Dummy information means that this page is allocated for page_owner feature itself (such as stackdepot) and it's understandable behavior for user. [iamjoonsoo.kim@lge.com: mm-page_owner-use-stackdepot-to-store-stacktrace-v3] Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1466150259-27727-7-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1464230275-25791-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:55 +08:00
return print_page_owner(buf, count, pfn, page,
page_owner, handle);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
}
return 0;
}
static void init_pages_in_zone(pg_data_t *pgdat, struct zone *zone)
{
unsigned long pfn = zone->zone_start_pfn;
unsigned long end_pfn = zone_end_pfn(zone);
unsigned long count = 0;
/*
* Walk the zone in pageblock_nr_pages steps. If a page block spans
* a zone boundary, it will be double counted between zones. This does
* not matter as the mixed block count will still be correct
*/
for (; pfn < end_pfn; ) {
unsigned long block_end_pfn;
if (!pfn_valid(pfn)) {
pfn = ALIGN(pfn + 1, MAX_ORDER_NR_PAGES);
continue;
}
block_end_pfn = ALIGN(pfn + 1, pageblock_nr_pages);
block_end_pfn = min(block_end_pfn, end_pfn);
for (; pfn < block_end_pfn; pfn++) {
struct page *page;
struct page_ext *page_ext;
if (!pfn_valid_within(pfn))
continue;
page = pfn_to_page(pfn);
if (page_zone(page) != zone)
continue;
/*
* To avoid having to grab zone->lock, be a little
* careful when reading buddy page order. The only
* danger is that we skip too much and potentially miss
* some early allocated pages, which is better than
* heavy lock contention.
*/
if (PageBuddy(page)) {
unsigned long order = page_order_unsafe(page);
if (order > 0 && order < MAX_ORDER)
pfn += (1UL << order) - 1;
continue;
}
if (PageReserved(page))
continue;
page_ext = lookup_page_ext(page);
if (unlikely(!page_ext))
continue;
mm, page_owner: make init_pages_in_zone() faster In init_pages_in_zone() we currently use the generic set_page_owner() function to initialize page_owner info for early allocated pages. This means we needlessly do lookup_page_ext() twice for each page, and more importantly save_stack(), which has to unwind the stack and find the corresponding stack depot handle. Because the stack is always the same for the initialization, unwind it once in init_pages_in_zone() and reuse the handle. Also avoid the repeated lookup_page_ext(). This can significantly reduce boot times with page_owner=on on large machines, especially for kernels built without frame pointer, where the stack unwinding is noticeably slower. [vbabka@suse.cz: don't duplicate code of __set_page_owner(), per Michal Hocko] [akpm@linux-foundation.org: coding-style fixes] [vbabka@suse.cz: create statically allocated fake stack trace for early allocated pages, per Michal] Link: http://lkml.kernel.org/r/45813564-2342-fc8d-d31a-f4b68a724325@suse.cz Link: http://lkml.kernel.org/r/20170720134029.25268-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 07:20:44 +08:00
/* Maybe overlapping zone */
if (test_bit(PAGE_EXT_OWNER, &page_ext->flags))
continue;
/* Found early allocated page */
mm, page_owner: make init_pages_in_zone() faster In init_pages_in_zone() we currently use the generic set_page_owner() function to initialize page_owner info for early allocated pages. This means we needlessly do lookup_page_ext() twice for each page, and more importantly save_stack(), which has to unwind the stack and find the corresponding stack depot handle. Because the stack is always the same for the initialization, unwind it once in init_pages_in_zone() and reuse the handle. Also avoid the repeated lookup_page_ext(). This can significantly reduce boot times with page_owner=on on large machines, especially for kernels built without frame pointer, where the stack unwinding is noticeably slower. [vbabka@suse.cz: don't duplicate code of __set_page_owner(), per Michal Hocko] [akpm@linux-foundation.org: coding-style fixes] [vbabka@suse.cz: create statically allocated fake stack trace for early allocated pages, per Michal] Link: http://lkml.kernel.org/r/45813564-2342-fc8d-d31a-f4b68a724325@suse.cz Link: http://lkml.kernel.org/r/20170720134029.25268-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 07:20:44 +08:00
__set_page_owner_handle(page_ext, early_handle, 0, 0);
count++;
}
cond_resched();
}
pr_info("Node %d, zone %8s: page owner found early allocated %lu pages\n",
pgdat->node_id, zone->name, count);
}
static void init_zones_in_node(pg_data_t *pgdat)
{
struct zone *zone;
struct zone *node_zones = pgdat->node_zones;
for (zone = node_zones; zone - node_zones < MAX_NR_ZONES; ++zone) {
if (!populated_zone(zone))
continue;
init_pages_in_zone(pgdat, zone);
}
}
static void init_early_allocated_pages(void)
{
pg_data_t *pgdat;
for_each_online_pgdat(pgdat)
init_zones_in_node(pgdat);
}
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
static const struct file_operations proc_page_owner_operations = {
.read = read_page_owner,
};
static int __init pageowner_init(void)
{
struct dentry *dentry;
if (!static_branch_unlikely(&page_owner_inited)) {
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
pr_info("page_owner is disabled\n");
return 0;
}
dentry = debugfs_create_file("page_owner", 0400, NULL,
NULL, &proc_page_owner_operations);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
return PTR_ERR_OR_ZERO(dentry);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 08:56:01 +08:00
}
late_initcall(pageowner_init)