p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/arch/powerpc/platforms/pasemi/pasemi.h

35 lines
856 B
C
Raw Normal View History

[POWERPC] powerpc: PA Semi PWRficient platform support Base patch for PA6T and PA6T-1682M. This introduces the arch/powerpc/platform/pasemi directory, together with basic implementations for various setup. Much of this was based on other platform code, i.e. Maple, etc. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-07 03:42:08 +08:00
#ifndef _PASEMI_PASEMI_H
#define _PASEMI_PASEMI_H
extern unsigned long pas_get_boot_time(void);
extern void pas_pci_init(void);
[POWERPC] pasemi: Configure DMA controller interrupts The DMA controller on PWRficient is somewhat special -- has a PCI header so it looks like it's on the root PCI (-Express) root bus, but it uses more than the default number of interrupts (and they are hardwired). We need to wire up all interrupts for the DMA controller. The generic IRQ code will only map the primary interrupt from the PCI header (128), so add 129->211 by hand. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-05 06:36:54 +08:00
extern void __devinit pas_pci_irq_fixup(struct pci_dev *dev);
[POWERPC] pasemi: iommu support I/O TLB support for PA6T-1682M. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-05 06:36:55 +08:00
extern void __devinit pas_pci_dma_dev_setup(struct pci_dev *dev);
[POWERPC] pasemi: Add pasemi_pci_getcfgaddr() Add pasemi_pci_getcfgaddr(), to get the remapped address of a specific config register for a PCI device. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-05 10:08:30 +08:00
extern void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset);
[POWERPC] pasemi: iommu support I/O TLB support for PA6T-1682M. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-05 06:36:55 +08:00
extern void __init alloc_iobmap_l2(void);
pasemi: DMA engine management library pasemi: DMA engine management library Introduce a DMA management library to manage the various DMA resources on the PA Semi SoCs. Since several drivers need to allocate these shared resources, provide some abstractions as well as allocation/free functions for channels, etc. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-29 10:56:20 +08:00
extern void __init pasemi_map_registers(void);
[POWERPC] powerpc: PA Semi PWRficient platform support Base patch for PA6T and PA6T-1682M. This introduces the arch/powerpc/platform/pasemi directory, together with basic implementations for various setup. Much of this was based on other platform code, i.e. Maple, etc. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-07 03:42:08 +08:00
[POWERPC] pasemi: Idle loops Powersave support on PA6T. Right now it only uses 'doze' mode, and will default to no savings (spin). Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-05 06:36:51 +08:00
/* Power savings modes, implemented in asm */
extern void idle_spin(void);
extern void idle_doze(void);
[POWERPC] pasemi: Cpufreq driver Cpufreq driver for PA Semi PWRficient processors. Signed-off-by: Egor Martovetsky <egor@pasemi.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 13:46:01 +08:00
/* Restore astate to last set */
#ifdef CONFIG_PPC_PASEMI_CPUFREQ
[POWERPC] pasemi: Don't enter powersaving states from elevated astates When the PWRficient cpus are entered into powersavings states, the astate is automatically dropped down to 0. While we still restore it when we come out of idle, it can still cause some weird effects with respect to performance (especially since it takes a while to ramp up to higher astates). So, to avoid this, don't enter power savings when the cpufreq driver (or user) has set higher astates than 0. The restore is still required, since there's a chance the astate has been raised from the other cpu while the idling one was asleep. Signed-off-by: Olof Johansson <olof@lixom.net>
2007-11-07 23:26:06 +08:00
extern int check_astate(void);
[POWERPC] pasemi: Cpufreq driver Cpufreq driver for PA Semi PWRficient processors. Signed-off-by: Egor Martovetsky <egor@pasemi.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 13:46:01 +08:00
extern void restore_astate(int cpu);
#else
[POWERPC] pasemi: Don't enter powersaving states from elevated astates When the PWRficient cpus are entered into powersavings states, the astate is automatically dropped down to 0. While we still restore it when we come out of idle, it can still cause some weird effects with respect to performance (especially since it takes a while to ramp up to higher astates). So, to avoid this, don't enter power savings when the cpufreq driver (or user) has set higher astates than 0. The restore is still required, since there's a chance the astate has been raised from the other cpu while the idling one was asleep. Signed-off-by: Olof Johansson <olof@lixom.net>
2007-11-07 23:26:06 +08:00
static inline int check_astate(void)
{
/* Always return >0 so we never power save */
return 1;
}
[POWERPC] pasemi: Cpufreq driver Cpufreq driver for PA Semi PWRficient processors. Signed-off-by: Egor Martovetsky <egor@pasemi.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 13:46:01 +08:00
static inline void restore_astate(int cpu)
{
}
#endif
[POWERPC] pasemi: Idle loops Powersave support on PA6T. Right now it only uses 'doze' mode, and will default to no savings (spin). Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-05 06:36:51 +08:00
[POWERPC] pasemi: iommu support I/O TLB support for PA6T-1682M. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-05 06:36:55 +08:00
[POWERPC] powerpc: PA Semi PWRficient platform support Base patch for PA6T and PA6T-1682M. This introduces the arch/powerpc/platform/pasemi directory, together with basic implementations for various setup. Much of this was based on other platform code, i.e. Maple, etc. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-07 03:42:08 +08:00
#endif /* _PASEMI_PASEMI_H */