linux_old1/arch/arm/crypto/Makefile

53 lines
1.7 KiB
Makefile
Raw Normal View History

#
# Arch-specific CryptoAPI modules.
#
obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o
ARM: add support for bit sliced AES using NEON instructions Bit sliced AES gives around 45% speedup on Cortex-A15 for encryption and around 25% for decryption. This implementation of the AES algorithm does not rely on any lookup tables so it is believed to be invulnerable to cache timing attacks. This algorithm processes up to 8 blocks in parallel in constant time. This means that it is not usable by chaining modes that are strictly sequential in nature, such as CBC encryption. CBC decryption, however, can benefit from this implementation and runs about 25% faster. The other chaining modes implemented in this module, XTS and CTR, can execute fully in parallel in both directions. The core code has been adopted from the OpenSSL project (in collaboration with the original author, on cc). For ease of maintenance, this version is identical to the upstream OpenSSL code, i.e., all modifications that were required to make it suitable for inclusion into the kernel have been made upstream. The original can be found here: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=6f6a6130 Note to integrators: While this implementation is significantly faster than the existing table based ones (generic or ARM asm), especially in CTR mode, the effects on power efficiency are unclear as of yet. This code does fundamentally more work, by calculating values that the table based code obtains by a simple lookup; only by doing all of that work in a SIMD fashion, it manages to perform better. Cc: Andy Polyakov <appro@openssl.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2013-09-17 00:31:38 +08:00
obj-$(CONFIG_CRYPTO_AES_ARM_BS) += aes-arm-bs.o
obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o
obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o
obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o
obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o
crypto: arm - workaround for building with old binutils Old versions of binutils (before 2.23) do not yet understand the crypto-neon-fp-armv8 fpu instructions, and an attempt to build these files results in a build failure: arch/arm/crypto/aes-ce-core.S:133: Error: selected processor does not support ARM mode `vld1.8 {q10-q11},[ip]!' arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aese.8 q0,q8' arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aesmc.8 q0,q0' arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aese.8 q0,q9' arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aesmc.8 q0,q0' Since the affected versions are still in widespread use, and this breaks 'allmodconfig' builds, we should try to at least get a successful kernel build. Unfortunately, I could not come up with a way to make the Kconfig symbol depend on the binutils version, which would be the nicest solution. Instead, this patch uses the 'as-instr' Kbuild macro to find out whether the support is present in the assembler, and otherwise emits a non-fatal warning indicating which selected modules could not be built. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: http://storage.kernelci.org/next/next-20150410/arm-allmodconfig/build.log Fixes: 864cbeed4ab22d ("crypto: arm - add support for SHA1 using ARMv8 Crypto Instructions") [ard.biesheuvel: - omit modules entirely instead of building empty ones if binutils is too old - update commit log accordingly] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-11 21:32:34 +08:00
ce-obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o
ce-obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o
ce-obj-$(CONFIG_CRYPTO_SHA2_ARM_CE) += sha2-arm-ce.o
ce-obj-$(CONFIG_CRYPTO_GHASH_ARM_CE) += ghash-arm-ce.o
ifneq ($(ce-obj-y)$(ce-obj-m),)
ifeq ($(call as-instr,.fpu crypto-neon-fp-armv8,y,n),y)
obj-y += $(ce-obj-y)
obj-m += $(ce-obj-m)
else
$(warning These ARMv8 Crypto Extensions modules need binutils 2.23 or higher)
$(warning $(ce-obj-y) $(ce-obj-m))
endif
endif
ARM: add support for bit sliced AES using NEON instructions Bit sliced AES gives around 45% speedup on Cortex-A15 for encryption and around 25% for decryption. This implementation of the AES algorithm does not rely on any lookup tables so it is believed to be invulnerable to cache timing attacks. This algorithm processes up to 8 blocks in parallel in constant time. This means that it is not usable by chaining modes that are strictly sequential in nature, such as CBC encryption. CBC decryption, however, can benefit from this implementation and runs about 25% faster. The other chaining modes implemented in this module, XTS and CTR, can execute fully in parallel in both directions. The core code has been adopted from the OpenSSL project (in collaboration with the original author, on cc). For ease of maintenance, this version is identical to the upstream OpenSSL code, i.e., all modifications that were required to make it suitable for inclusion into the kernel have been made upstream. The original can be found here: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=6f6a6130 Note to integrators: While this implementation is significantly faster than the existing table based ones (generic or ARM asm), especially in CTR mode, the effects on power efficiency are unclear as of yet. This code does fundamentally more work, by calculating values that the table based code obtains by a simple lookup; only by doing all of that work in a SIMD fashion, it manages to perform better. Cc: Andy Polyakov <appro@openssl.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2013-09-17 00:31:38 +08:00
aes-arm-y := aes-armv4.o aes_glue.o
aes-arm-bs-y := aesbs-core.o aesbs-glue.o
sha1-arm-y := sha1-armv4-large.o sha1_glue.o
sha1-arm-neon-y := sha1-armv7-neon.o sha1_neon_glue.o
sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o
sha256-arm-y := sha256-core.o sha256_glue.o $(sha256-arm-neon-y)
sha512-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha512-neon-glue.o
sha512-arm-y := sha512-core.o sha512-glue.o $(sha512-arm-neon-y)
sha1-arm-ce-y := sha1-ce-core.o sha1-ce-glue.o
sha2-arm-ce-y := sha2-ce-core.o sha2-ce-glue.o
aes-arm-ce-y := aes-ce-core.o aes-ce-glue.o
ghash-arm-ce-y := ghash-ce-core.o ghash-ce-glue.o
ARM: add support for bit sliced AES using NEON instructions Bit sliced AES gives around 45% speedup on Cortex-A15 for encryption and around 25% for decryption. This implementation of the AES algorithm does not rely on any lookup tables so it is believed to be invulnerable to cache timing attacks. This algorithm processes up to 8 blocks in parallel in constant time. This means that it is not usable by chaining modes that are strictly sequential in nature, such as CBC encryption. CBC decryption, however, can benefit from this implementation and runs about 25% faster. The other chaining modes implemented in this module, XTS and CTR, can execute fully in parallel in both directions. The core code has been adopted from the OpenSSL project (in collaboration with the original author, on cc). For ease of maintenance, this version is identical to the upstream OpenSSL code, i.e., all modifications that were required to make it suitable for inclusion into the kernel have been made upstream. The original can be found here: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=6f6a6130 Note to integrators: While this implementation is significantly faster than the existing table based ones (generic or ARM asm), especially in CTR mode, the effects on power efficiency are unclear as of yet. This code does fundamentally more work, by calculating values that the table based code obtains by a simple lookup; only by doing all of that work in a SIMD fashion, it manages to perform better. Cc: Andy Polyakov <appro@openssl.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2013-09-17 00:31:38 +08:00
quiet_cmd_perl = PERL $@
cmd_perl = $(PERL) $(<) > $(@)
$(src)/aesbs-core.S_shipped: $(src)/bsaes-armv7.pl
$(call cmd,perl)
$(src)/sha256-core.S_shipped: $(src)/sha256-armv4.pl
$(call cmd,perl)
$(src)/sha512-core.S_shipped: $(src)/sha512-armv4.pl
$(call cmd,perl)
.PRECIOUS: $(obj)/aesbs-core.S $(obj)/sha256-core.S $(obj)/sha512-core.S