linux_old1/net/batman-adv/bat_v.c

409 lines
11 KiB
C
Raw Normal View History

batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
/* Copyright (C) 2013-2016 B.A.T.M.A.N. contributors:
*
* Linus Lüssing, Marek Lindner
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "bat_v.h"
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
#include "main.h"
#include <linux/atomic.h>
#include <linux/bug.h>
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
#include <linux/cache.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include <linux/netdevice.h>
#include <linux/rculist.h>
#include <linux/rcupdate.h>
#include <linux/seq_file.h>
#include <linux/stddef.h>
#include <linux/types.h>
#include <linux/workqueue.h>
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
#include "bat_algo.h"
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
#include "bat_v_elp.h"
#include "bat_v_ogm.h"
#include "hard-interface.h"
#include "hash.h"
#include "originator.h"
#include "packet.h"
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
static void batadv_v_iface_activate(struct batadv_hard_iface *hard_iface)
{
struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface);
struct batadv_hard_iface *primary_if;
primary_if = batadv_primary_if_get_selected(bat_priv);
if (primary_if) {
batadv_v_elp_iface_activate(primary_if, hard_iface);
batadv_hardif_put(primary_if);
}
/* B.A.T.M.A.N. V does not use any queuing mechanism, therefore it can
* set the interface as ACTIVE right away, without any risk of race
* condition
*/
if (hard_iface->if_status == BATADV_IF_TO_BE_ACTIVATED)
hard_iface->if_status = BATADV_IF_ACTIVE;
}
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
static int batadv_v_iface_enable(struct batadv_hard_iface *hard_iface)
{
int ret;
ret = batadv_v_elp_iface_enable(hard_iface);
if (ret < 0)
return ret;
ret = batadv_v_ogm_iface_enable(hard_iface);
if (ret < 0)
batadv_v_elp_iface_disable(hard_iface);
return ret;
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
}
static void batadv_v_iface_disable(struct batadv_hard_iface *hard_iface)
{
batadv_v_elp_iface_disable(hard_iface);
}
static void batadv_v_primary_iface_set(struct batadv_hard_iface *hard_iface)
{
batadv_v_elp_primary_iface_set(hard_iface);
batadv_v_ogm_primary_iface_set(hard_iface);
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
}
/**
* batadv_v_iface_update_mac - react to hard-interface MAC address change
* @hard_iface: the modified interface
*
* If the modified interface is the primary one, update the originator
* address in the ELP and OGM messages to reflect the new MAC address.
*/
static void batadv_v_iface_update_mac(struct batadv_hard_iface *hard_iface)
{
struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface);
struct batadv_hard_iface *primary_if;
primary_if = batadv_primary_if_get_selected(bat_priv);
if (primary_if != hard_iface)
goto out;
batadv_v_primary_iface_set(hard_iface);
out:
if (primary_if)
batadv_hardif_put(primary_if);
}
static void
batadv_v_hardif_neigh_init(struct batadv_hardif_neigh_node *hardif_neigh)
{
ewma_throughput_init(&hardif_neigh->bat_v.throughput);
INIT_WORK(&hardif_neigh->bat_v.metric_work,
batadv_v_elp_throughput_metric_update);
}
/**
* batadv_v_orig_print_neigh - print neighbors for the originator table
* @orig_node: the orig_node for which the neighbors are printed
* @if_outgoing: outgoing interface for these entries
* @seq: debugfs table seq_file struct
*
* Must be called while holding an rcu lock.
*/
static void
batadv_v_orig_print_neigh(struct batadv_orig_node *orig_node,
struct batadv_hard_iface *if_outgoing,
struct seq_file *seq)
{
struct batadv_neigh_node *neigh_node;
struct batadv_neigh_ifinfo *n_ifinfo;
hlist_for_each_entry_rcu(neigh_node, &orig_node->neigh_list, list) {
n_ifinfo = batadv_neigh_ifinfo_get(neigh_node, if_outgoing);
if (!n_ifinfo)
continue;
seq_printf(seq, " %pM (%9u.%1u)",
neigh_node->addr,
n_ifinfo->bat_v.throughput / 10,
n_ifinfo->bat_v.throughput % 10);
batadv_neigh_ifinfo_put(n_ifinfo);
}
}
/**
* batadv_v_hardif_neigh_print - print a single ELP neighbour node
* @seq: neighbour table seq_file struct
* @hardif_neigh: hardif neighbour information
*/
static void
batadv_v_hardif_neigh_print(struct seq_file *seq,
struct batadv_hardif_neigh_node *hardif_neigh)
{
int last_secs, last_msecs;
u32 throughput;
last_secs = jiffies_to_msecs(jiffies - hardif_neigh->last_seen) / 1000;
last_msecs = jiffies_to_msecs(jiffies - hardif_neigh->last_seen) % 1000;
throughput = ewma_throughput_read(&hardif_neigh->bat_v.throughput);
seq_printf(seq, "%pM %4i.%03is (%9u.%1u) [%10s]\n",
hardif_neigh->addr, last_secs, last_msecs, throughput / 10,
throughput % 10, hardif_neigh->if_incoming->net_dev->name);
}
/**
* batadv_v_neigh_print - print the single hop neighbour list
* @bat_priv: the bat priv with all the soft interface information
* @seq: neighbour table seq_file struct
*/
static void batadv_v_neigh_print(struct batadv_priv *bat_priv,
struct seq_file *seq)
{
struct net_device *net_dev = (struct net_device *)seq->private;
struct batadv_hardif_neigh_node *hardif_neigh;
struct batadv_hard_iface *hard_iface;
int batman_count = 0;
seq_puts(seq,
" Neighbor last-seen ( throughput) [ IF]\n");
rcu_read_lock();
list_for_each_entry_rcu(hard_iface, &batadv_hardif_list, list) {
if (hard_iface->soft_iface != net_dev)
continue;
hlist_for_each_entry_rcu(hardif_neigh,
&hard_iface->neigh_list, list) {
batadv_v_hardif_neigh_print(seq, hardif_neigh);
batman_count++;
}
}
rcu_read_unlock();
if (batman_count == 0)
seq_puts(seq, "No batman nodes in range ...\n");
}
/**
* batadv_v_orig_print - print the originator table
* @bat_priv: the bat priv with all the soft interface information
* @seq: debugfs table seq_file struct
* @if_outgoing: the outgoing interface for which this should be printed
*/
static void batadv_v_orig_print(struct batadv_priv *bat_priv,
struct seq_file *seq,
struct batadv_hard_iface *if_outgoing)
{
struct batadv_neigh_node *neigh_node;
struct batadv_hashtable *hash = bat_priv->orig_hash;
int last_seen_msecs, last_seen_secs;
struct batadv_orig_node *orig_node;
struct batadv_neigh_ifinfo *n_ifinfo;
unsigned long last_seen_jiffies;
struct hlist_head *head;
int batman_count = 0;
u32 i;
seq_puts(seq,
" Originator last-seen ( throughput) Nexthop [outgoingIF]: Potential nexthops ...\n");
for (i = 0; i < hash->size; i++) {
head = &hash->table[i];
rcu_read_lock();
hlist_for_each_entry_rcu(orig_node, head, hash_entry) {
neigh_node = batadv_orig_router_get(orig_node,
if_outgoing);
if (!neigh_node)
continue;
n_ifinfo = batadv_neigh_ifinfo_get(neigh_node,
if_outgoing);
if (!n_ifinfo)
goto next;
last_seen_jiffies = jiffies - orig_node->last_seen;
last_seen_msecs = jiffies_to_msecs(last_seen_jiffies);
last_seen_secs = last_seen_msecs / 1000;
last_seen_msecs = last_seen_msecs % 1000;
seq_printf(seq, "%pM %4i.%03is (%9u.%1u) %pM [%10s]:",
orig_node->orig, last_seen_secs,
last_seen_msecs,
n_ifinfo->bat_v.throughput / 10,
n_ifinfo->bat_v.throughput % 10,
neigh_node->addr,
neigh_node->if_incoming->net_dev->name);
batadv_v_orig_print_neigh(orig_node, if_outgoing, seq);
seq_puts(seq, "\n");
batman_count++;
next:
batadv_neigh_node_put(neigh_node);
if (n_ifinfo)
batadv_neigh_ifinfo_put(n_ifinfo);
}
rcu_read_unlock();
}
if (batman_count == 0)
seq_puts(seq, "No batman nodes in range ...\n");
}
static int batadv_v_neigh_cmp(struct batadv_neigh_node *neigh1,
struct batadv_hard_iface *if_outgoing1,
struct batadv_neigh_node *neigh2,
struct batadv_hard_iface *if_outgoing2)
{
struct batadv_neigh_ifinfo *ifinfo1, *ifinfo2;
int ret = 0;
ifinfo1 = batadv_neigh_ifinfo_get(neigh1, if_outgoing1);
if (WARN_ON(!ifinfo1))
goto err_ifinfo1;
ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2);
if (WARN_ON(!ifinfo2))
goto err_ifinfo2;
ret = ifinfo1->bat_v.throughput - ifinfo2->bat_v.throughput;
batadv_neigh_ifinfo_put(ifinfo2);
err_ifinfo2:
batadv_neigh_ifinfo_put(ifinfo1);
err_ifinfo1:
return ret;
}
static bool batadv_v_neigh_is_sob(struct batadv_neigh_node *neigh1,
struct batadv_hard_iface *if_outgoing1,
struct batadv_neigh_node *neigh2,
struct batadv_hard_iface *if_outgoing2)
{
struct batadv_neigh_ifinfo *ifinfo1, *ifinfo2;
u32 threshold;
bool ret = false;
ifinfo1 = batadv_neigh_ifinfo_get(neigh1, if_outgoing1);
if (WARN_ON(!ifinfo1))
goto err_ifinfo1;
ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2);
if (WARN_ON(!ifinfo2))
goto err_ifinfo2;
threshold = ifinfo1->bat_v.throughput / 4;
threshold = ifinfo1->bat_v.throughput - threshold;
ret = ifinfo2->bat_v.throughput > threshold;
batadv_neigh_ifinfo_put(ifinfo2);
err_ifinfo2:
batadv_neigh_ifinfo_put(ifinfo1);
err_ifinfo1:
return ret;
}
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
static struct batadv_algo_ops batadv_batman_v __read_mostly = {
.name = "BATMAN_V",
.bat_iface_activate = batadv_v_iface_activate,
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
.bat_iface_enable = batadv_v_iface_enable,
.bat_iface_disable = batadv_v_iface_disable,
.bat_iface_update_mac = batadv_v_iface_update_mac,
.bat_primary_iface_set = batadv_v_primary_iface_set,
.bat_hardif_neigh_init = batadv_v_hardif_neigh_init,
.bat_orig_print = batadv_v_orig_print,
.bat_neigh_cmp = batadv_v_neigh_cmp,
.bat_neigh_is_similar_or_better = batadv_v_neigh_is_sob,
.bat_neigh_print = batadv_v_neigh_print,
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
};
/**
* batadv_v_hardif_init - initialize the algorithm specific fields in the
* hard-interface object
* @hard_iface: the hard-interface to initialize
*/
void batadv_v_hardif_init(struct batadv_hard_iface *hard_iface)
{
/* enable link throughput auto-detection by setting the throughput
* override to zero
*/
atomic_set(&hard_iface->bat_v.throughput_override, 0);
atomic_set(&hard_iface->bat_v.elp_interval, 500);
}
/**
* batadv_v_mesh_init - initialize the B.A.T.M.A.N. V private resources for a
* mesh
* @bat_priv: the object representing the mesh interface to initialise
*
* Return: 0 on success or a negative error code otherwise
*/
int batadv_v_mesh_init(struct batadv_priv *bat_priv)
{
return batadv_v_ogm_init(bat_priv);
}
/**
* batadv_v_mesh_free - free the B.A.T.M.A.N. V private resources for a mesh
* @bat_priv: the object representing the mesh interface to free
*/
void batadv_v_mesh_free(struct batadv_priv *bat_priv)
{
batadv_v_ogm_free(bat_priv);
}
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
/**
* batadv_v_init - B.A.T.M.A.N. V initialization function
*
* Description: Takes care of initializing all the subcomponents.
* It is invoked upon module load only.
*
* Return: 0 on success or a negative error code otherwise
*/
int __init batadv_v_init(void)
{
int ret;
/* B.A.T.M.A.N. V echo location protocol packet */
ret = batadv_recv_handler_register(BATADV_ELP,
batadv_v_elp_packet_recv);
if (ret < 0)
return ret;
ret = batadv_recv_handler_register(BATADV_OGM2,
batadv_v_ogm_packet_recv);
if (ret < 0)
goto elp_unregister;
ret = batadv_algo_register(&batadv_batman_v);
if (ret < 0)
goto ogm_unregister;
return ret;
ogm_unregister:
batadv_recv_handler_unregister(BATADV_OGM2);
elp_unregister:
batadv_recv_handler_unregister(BATADV_ELP);
return ret;
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
}