p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/drivers/net/tlan.c

3319 lines
92 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*******************************************************************************
*
* Linux ThunderLAN Driver
*
* tlan.c
* by James Banks
*
* (C) 1997-1998 Caldera, Inc.
* (C) 1998 James Banks
* (C) 1999-2001 Torben Mathiasen
* (C) 2002 Samuel Chessman
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
** Useful (if not required) reading:
*
* Texas Instruments, ThunderLAN Programmer's Guide,
* TI Literature Number SPWU013A
* available in PDF format from www.ti.com
* Level One, LXT901 and LXT970 Data Sheets
* available in PDF format from www.level1.com
* National Semiconductor, DP83840A Data Sheet
* available in PDF format from www.national.com
* Microchip Technology, 24C01A/02A/04A Data Sheet
* available in PDF format from www.microchip.com
*
* Change History
*
* Tigran Aivazian <tigran@sco.com>: TLan_PciProbe() now uses
* new PCI BIOS interface.
net: Rationalise email address: Network Specific Parts Clean up the various different email addresses of mine listed in the code to a single current and valid address. As Dave says his network merges for 2.6.28 are now done this seems a good point to send them in where they won't risk disrupting real changes. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-14 10:01:08 +08:00
* Alan Cox <alan@lxorguk.ukuu.org.uk>:
* Fixed the out of memory
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* handling.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Torben Mathiasen <torben.mathiasen@compaq.com> New Maintainer!
*
* v1.1 Dec 20, 1999 - Removed linux version checking
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* Patch from Tigran Aivazian.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* - v1.1 includes Alan's SMP updates.
* - We still have problems on SMP though,
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* but I'm looking into that.
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* v1.2 Jan 02, 2000 - Hopefully fixed the SMP deadlock.
* - Removed dependency of HZ being 100.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* - We now allow higher priority timers to
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* overwrite timers like TLAN_TIMER_ACTIVITY
* Patch from John Cagle <john.cagle@compaq.com>.
* - Fixed a few compiler warnings.
*
* v1.3 Feb 04, 2000 - Fixed the remaining HZ issues.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* - Removed call to pci_present().
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* - Removed SA_INTERRUPT flag from irq handler.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* - Added __init and __initdata to reduce resisdent
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* code size.
* - Driver now uses module_init/module_exit.
* - Rewrote init_module and tlan_probe to
* share a lot more code. We now use tlan_probe
* with builtin and module driver.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* - Driver ported to new net API.
* - tlan.txt has been reworked to reflect current
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* driver (almost)
* - Other minor stuff
*
* v1.4 Feb 10, 2000 - Updated with more changes required after Dave's
* network cleanup in 2.3.43pre7 (Tigran & myself)
* - Minor stuff.
*
* v1.5 March 22, 2000 - Fixed another timer bug that would hang the driver
* if no cable/link were present.
* - Cosmetic changes.
* - TODO: Port completely to new PCI/DMA API
* Auto-Neg fallback.
*
* v1.6 April 04, 2000 - Fixed driver support for kernel-parameters. Haven't
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* tested it though, as the kernel support is currently
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* broken (2.3.99p4p3).
* - Updated tlan.txt accordingly.
* - Adjusted minimum/maximum frame length.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* - There is now a TLAN website up at
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* http://tlan.kernel.dk
*
* v1.7 April 07, 2000 - Started to implement custom ioctls. Driver now
* reports PHY information when used with Donald
* Beckers userspace MII diagnostics utility.
*
* v1.8 April 23, 2000 - Fixed support for forced speed/duplex settings.
* - Added link information to Auto-Neg and forced
* modes. When NIC operates with auto-neg the driver
* will report Link speed & duplex modes as well as
* link partner abilities. When forced link is used,
* the driver will report status of the established
* link.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* Please read tlan.txt for additional information.
* - Removed call to check_region(), and used
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* return value of request_region() instead.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* v1.8a May 28, 2000 - Minor updates.
*
* v1.9 July 25, 2000 - Fixed a few remaining Full-Duplex issues.
* - Updated with timer fixes from Andrew Morton.
* - Fixed module race in TLan_Open.
* - Added routine to monitor PHY status.
* - Added activity led support for Proliant devices.
*
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* v1.10 Aug 30, 2000 - Added support for EISA based tlan controllers
* like the Compaq NetFlex3/E.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* - Rewrote tlan_probe to better handle multiple
* bus probes. Probing and device setup is now
* done through TLan_Probe and TLan_init_one. Actual
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* hardware probe is done with kernel API and
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* TLan_EisaProbe.
* - Adjusted debug information for probing.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* - Fixed bug that would cause general debug information
* to be printed after driver removal.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* - Added transmit timeout handling.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* - Fixed OOM return values in tlan_probe.
* - Fixed possible mem leak in tlan_exit
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* (now tlan_remove_one).
* - Fixed timer bug in TLan_phyMonitor.
* - This driver version is alpha quality, please
* send me any bug issues you may encounter.
*
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* v1.11 Aug 31, 2000 - Do not try to register irq 0 if no irq line was
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* set for EISA cards.
* - Added support for NetFlex3/E with nibble-rate
* 10Base-T PHY. This is untestet as I haven't got
* one of these cards.
* - Fixed timer being added twice.
* - Disabled PhyMonitoring by default as this is
* work in progress. Define MONITOR to enable it.
* - Now we don't display link info with PHYs that
* doesn't support it (level1).
* - Incresed tx_timeout beacuse of auto-neg.
* - Adjusted timers for forced speeds.
*
* v1.12 Oct 12, 2000 - Minor fixes (memleak, init, etc.)
*
* v1.13 Nov 28, 2000 - Stop flooding console with auto-neg issues
* when link can't be established.
* - Added the bbuf option as a kernel parameter.
* - Fixed ioaddr probe bug.
* - Fixed stupid deadlock with MII interrupts.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* - Added support for speed/duplex selection with
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* multiple nics.
* - Added partly fix for TX Channel lockup with
* TLAN v1.0 silicon. This needs to be investigated
* further.
*
* v1.14 Dec 16, 2000 - Added support for servicing multiple frames per.
* interrupt. Thanks goes to
* Adam Keys <adam@ti.com>
* Denis Beaudoin <dbeaudoin@ti.com>
* for providing the patch.
* - Fixed auto-neg output when using multiple
* adapters.
* - Converted to use new taskq interface.
*
* v1.14a Jan 6, 2001 - Minor adjustments (spinlocks, etc.)
*
* Samuel Chessman <chessman@tux.org> New Maintainer!
*
* v1.15 Apr 4, 2002 - Correct operation when aui=1 to be
* 10T half duplex no loopback
* Thanks to Gunnar Eikman
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
*
* Sakari Ailus <sakari.ailus@iki.fi>:
*
* v1.15a Dec 15 2008 - Remove bbuf support, it doesn't work anyway.
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*******************************************************************************/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/eisa.h>
#include <linux/pci.h>
drivers/net/: Use the DMA_{64,32}BIT_MASK constants Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() This patch includes dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org>
2005-06-27 06:22:14 +08:00
#include <linux/dma-mapping.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/mii.h>
#include "tlan.h"
typedef u32 (TLanIntVectorFunc)( struct net_device *, u16 );
/* For removing EISA devices */
static struct net_device *TLan_Eisa_Devices;
static int TLanDevicesInstalled;
/* Set speed, duplex and aui settings */
static int aui[MAX_TLAN_BOARDS];
static int duplex[MAX_TLAN_BOARDS];
static int speed[MAX_TLAN_BOARDS];
static int boards_found;
[PATCH] tlan: restore deleted module parameters. The module parameter values got lost in the conversion to the new module_param interface. This should fix it. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Index: tlan/drivers/net/tlan.c ===================================================================
2005-05-05 06:33:11 +08:00
module_param_array(aui, int, NULL, 0);
module_param_array(duplex, int, NULL, 0);
module_param_array(speed, int, NULL, 0);
MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)");
MODULE_PARM_DESC(duplex, "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)");
MODULE_PARM_DESC(speed, "ThunderLAN port speen setting(s) (0,10,100)");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
MODULE_AUTHOR("Maintainer: Samuel Chessman <chessman@tux.org>");
MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters");
MODULE_LICENSE("GPL");
/* Define this to enable Link beat monitoring */
#undef MONITOR
/* Turn on debugging. See Documentation/networking/tlan.txt for details */
static int debug;
[PATCH] tlan: restore deleted module parameters. The module parameter values got lost in the conversion to the new module_param interface. This should fix it. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Index: tlan/drivers/net/tlan.c ===================================================================
2005-05-05 06:33:11 +08:00
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "ThunderLAN debug mask");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tlan: proper shared IRQ support Handle shared IRQ correctly. If IRQ is shared, it typically will show up as an IRQ with an empty status field. So check in driver and handle it without crapping out with invalid interrupt message. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:57 +08:00
static const char TLanSignature[] = "TLAN";
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
static const char tlan_banner[] = "ThunderLAN driver v1.15a\n";
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int tlan_have_pci;
static int tlan_have_eisa;
static const char *media[] = {
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
"10BaseT-HD ", "10BaseT-FD ","100baseTx-HD ",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
"100baseTx-FD", "100baseT4", NULL
};
static struct board {
const char *deviceLabel;
u32 flags;
u16 addrOfs;
} board_info[] = {
{ "Compaq Netelligent 10 T PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
{ "Compaq Netelligent 10/100 TX PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
{ "Compaq Integrated NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
{ "Compaq NetFlex-3/P",
TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{ "Compaq NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
{ "Compaq Netelligent Integrated 10/100 TX UTP",
TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{ "Compaq Netelligent Dual 10/100 TX PCI UTP", TLAN_ADAPTER_NONE, 0x83 },
{ "Compaq Netelligent 10/100 TX Embedded UTP", TLAN_ADAPTER_NONE, 0x83 },
{ "Olicom OC-2183/2185", TLAN_ADAPTER_USE_INTERN_10, 0x83 },
{ "Olicom OC-2325", TLAN_ADAPTER_UNMANAGED_PHY, 0xF8 },
{ "Olicom OC-2326", TLAN_ADAPTER_USE_INTERN_10, 0xF8 },
{ "Compaq Netelligent 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
{ "Compaq Netelligent 10 T/2 PCI UTP/Coax", TLAN_ADAPTER_NONE, 0x83 },
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
{ "Compaq NetFlex-3/E",
TLAN_ADAPTER_ACTIVITY_LED | /* EISA card */
TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{ "Compaq NetFlex-3/E", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, /* EISA card */
};
static struct pci_device_id tlan_pci_tbl[] = {
{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL10,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3I,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_THUNDER,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3B,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100PI,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 },
{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100D,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 },
{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100I,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 },
{ PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2183,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
{ PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2325,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 },
{ PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2326,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 },
{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_100_WS_5100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 },
{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_T2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 },
{ 0,}
};
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
MODULE_DEVICE_TABLE(pci, tlan_pci_tbl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void TLan_EisaProbe( void );
static void TLan_Eisa_Cleanup( void );
static int TLan_Init( struct net_device * );
static int TLan_Open( struct net_device *dev );
netdev: convert bulk of drivers to netdev_tx_t In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 03:50:58 +08:00
static netdev_tx_t TLan_StartTx( struct sk_buff *, struct net_device *);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t TLan_HandleInterrupt( int, void *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int TLan_Close( struct net_device *);
static struct net_device_stats *TLan_GetStats( struct net_device *);
static void TLan_SetMulticastList( struct net_device *);
static int TLan_ioctl( struct net_device *dev, struct ifreq *rq, int cmd);
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
static int TLan_probe1( struct pci_dev *pdev, long ioaddr,
int irq, int rev, const struct pci_device_id *ent);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void TLan_tx_timeout( struct net_device *dev);
WorkStruct: make allyesconfig Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 22:57:56 +08:00
static void TLan_tx_timeout_work(struct work_struct *work);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int tlan_init_one( struct pci_dev *pdev, const struct pci_device_id *ent);
static u32 TLan_HandleTxEOF( struct net_device *, u16 );
static u32 TLan_HandleStatOverflow( struct net_device *, u16 );
static u32 TLan_HandleRxEOF( struct net_device *, u16 );
static u32 TLan_HandleDummy( struct net_device *, u16 );
static u32 TLan_HandleTxEOC( struct net_device *, u16 );
static u32 TLan_HandleStatusCheck( struct net_device *, u16 );
static u32 TLan_HandleRxEOC( struct net_device *, u16 );
static void TLan_Timer( unsigned long );
static void TLan_ResetLists( struct net_device * );
static void TLan_FreeLists( struct net_device * );
static void TLan_PrintDio( u16 );
static void TLan_PrintList( TLanList *, char *, int );
static void TLan_ReadAndClearStats( struct net_device *, int );
static void TLan_ResetAdapter( struct net_device * );
static void TLan_FinishReset( struct net_device * );
static void TLan_SetMac( struct net_device *, int areg, char *mac );
static void TLan_PhyPrint( struct net_device * );
static void TLan_PhyDetect( struct net_device * );
static void TLan_PhyPowerDown( struct net_device * );
static void TLan_PhyPowerUp( struct net_device * );
static void TLan_PhyReset( struct net_device * );
static void TLan_PhyStartLink( struct net_device * );
static void TLan_PhyFinishAutoNeg( struct net_device * );
#ifdef MONITOR
static void TLan_PhyMonitor( struct net_device * );
#endif
/*
static int TLan_PhyNop( struct net_device * );
static int TLan_PhyInternalCheck( struct net_device * );
static int TLan_PhyInternalService( struct net_device * );
static int TLan_PhyDp83840aCheck( struct net_device * );
*/
static int TLan_MiiReadReg( struct net_device *, u16, u16, u16 * );
static void TLan_MiiSendData( u16, u32, unsigned );
static void TLan_MiiSync( u16 );
static void TLan_MiiWriteReg( struct net_device *, u16, u16, u16 );
static void TLan_EeSendStart( u16 );
static int TLan_EeSendByte( u16, u8, int );
static void TLan_EeReceiveByte( u16, u8 *, int );
static int TLan_EeReadByte( struct net_device *, u8, u8 * );
tlan: 64bit conversion Make this driver compile cleanly on 64 bit platforms. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:55 +08:00
static inline void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLan_StoreSKB( struct tlan_list_tag *tag, struct sk_buff *skb)
{
unsigned long addr = (unsigned long)skb;
tlan: 64bit conversion Make this driver compile cleanly on 64 bit platforms. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:55 +08:00
tag->buffer[9].address = addr;
tag->buffer[8].address = upper_32_bits(addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
tlan: 64bit conversion Make this driver compile cleanly on 64 bit platforms. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:55 +08:00
static inline struct sk_buff *
TLan_GetSKB( const struct tlan_list_tag *tag)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
tlan: 64bit conversion Make this driver compile cleanly on 64 bit platforms. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:55 +08:00
unsigned long addr;
tlan: Fix two regressions introduced by 64bit conversion. Two regressions were introduced by the recent tlan: 64bit conversion commit (93e16847c9db0093065c98063cfc639cdfccf19a). The first in TLan_GetSKB caused a NULL pointer dereference. With the second causing the link to fail to come up. Signed-off-by: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-10 00:54:02 +08:00
addr = tag->buffer[9].address;
addr |= (tag->buffer[8].address << 16) << 16;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return (struct sk_buff *) addr;
}
static TLanIntVectorFunc *TLanIntVector[TLAN_INT_NUMBER_OF_INTS] = {
tlan: proper shared IRQ support Handle shared IRQ correctly. If IRQ is shared, it typically will show up as an IRQ with an empty status field. So check in driver and handle it without crapping out with invalid interrupt message. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:57 +08:00
NULL,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLan_HandleTxEOF,
TLan_HandleStatOverflow,
TLan_HandleRxEOF,
TLan_HandleDummy,
TLan_HandleTxEOC,
TLan_HandleStatusCheck,
TLan_HandleRxEOC
};
static inline void
TLan_SetTimer( struct net_device *dev, u32 ticks, u32 type )
{
TLanPrivateInfo *priv = netdev_priv(dev);
unsigned long flags = 0;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!in_irq())
spin_lock_irqsave(&priv->lock, flags);
if ( priv->timer.function != NULL &&
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
priv->timerType != TLAN_TIMER_ACTIVITY ) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!in_irq())
spin_unlock_irqrestore(&priv->lock, flags);
return;
}
priv->timer.function = &TLan_Timer;
if (!in_irq())
spin_unlock_irqrestore(&priv->lock, flags);
priv->timer.data = (unsigned long) dev;
priv->timerSetAt = jiffies;
priv->timerType = type;
mod_timer(&priv->timer, jiffies + ticks);
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* TLan_SetTimer */
/*****************************************************************************
******************************************************************************
ThunderLAN Driver Primary Functions
These functions are more or less common to all Linux network drivers.
******************************************************************************
*****************************************************************************/
/***************************************************************
* tlan_remove_one
*
* Returns:
* Nothing
* Parms:
* None
*
* Goes through the TLanDevices list and frees the device
* structs and memory associated with each device (lists
* and buffers). It also ureserves the IO port regions
* associated with this device.
*
**************************************************************/
static void __devexit tlan_remove_one( struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata( pdev );
TLanPrivateInfo *priv = netdev_priv(dev);
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unregister_netdev( dev );
if ( priv->dmaStorage ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
pci_free_consistent(priv->pciDev,
priv->dmaSize, priv->dmaStorage,
priv->dmaStorageDMA );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
#ifdef CONFIG_PCI
pci_release_regions(pdev);
#endif
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
free_netdev( dev );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pci_set_drvdata( pdev, NULL );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static struct pci_driver tlan_driver = {
.name = "tlan",
.id_table = tlan_pci_tbl,
.probe = tlan_init_one,
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
.remove = __devexit_p(tlan_remove_one),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
static int __init tlan_probe(void)
{
drivers/net/tlan.c: compilation warning fix Add a check for the pci_register_driver() return value. Removed unused variable pad_allocated. The aim of this patch is to remove the following warning messages: drivers/net/tlan.c: In function 'tlan_probe': drivers/net/tlan.c:486: warning: ignoring return value of 'pci_register_driver', declared with attribute warn_unused_result Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-05 15:47:16 +08:00
int rc = -ENODEV;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_INFO "%s", tlan_banner);
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLAN_DBG(TLAN_DEBUG_PROBE, "Starting PCI Probe....\n");
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Use new style PCI probing. Now the kernel will
do most of this for us */
drivers/net/tlan.c: compilation warning fix Add a check for the pci_register_driver() return value. Removed unused variable pad_allocated. The aim of this patch is to remove the following warning messages: drivers/net/tlan.c: In function 'tlan_probe': drivers/net/tlan.c:486: warning: ignoring return value of 'pci_register_driver', declared with attribute warn_unused_result Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-05 15:47:16 +08:00
rc = pci_register_driver(&tlan_driver);
if (rc != 0) {
printk(KERN_ERR "TLAN: Could not register pci driver.\n");
goto err_out_pci_free;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLAN_DBG(TLAN_DEBUG_PROBE, "Starting EISA Probe....\n");
TLan_EisaProbe();
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
printk(KERN_INFO "TLAN: %d device%s installed, PCI: %d EISA: %d\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLanDevicesInstalled, TLanDevicesInstalled == 1 ? "" : "s",
tlan_have_pci, tlan_have_eisa);
if (TLanDevicesInstalled == 0) {
drivers/net/tlan.c: compilation warning fix Add a check for the pci_register_driver() return value. Removed unused variable pad_allocated. The aim of this patch is to remove the following warning messages: drivers/net/tlan.c: In function 'tlan_probe': drivers/net/tlan.c:486: warning: ignoring return value of 'pci_register_driver', declared with attribute warn_unused_result Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-05 15:47:16 +08:00
rc = -ENODEV;
goto err_out_pci_unreg;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
return 0;
drivers/net/tlan.c: compilation warning fix Add a check for the pci_register_driver() return value. Removed unused variable pad_allocated. The aim of this patch is to remove the following warning messages: drivers/net/tlan.c: In function 'tlan_probe': drivers/net/tlan.c:486: warning: ignoring return value of 'pci_register_driver', declared with attribute warn_unused_result Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-05 15:47:16 +08:00
err_out_pci_unreg:
pci_unregister_driver(&tlan_driver);
err_out_pci_free:
return rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int __devinit tlan_init_one( struct pci_dev *pdev,
const struct pci_device_id *ent)
{
return TLan_probe1( pdev, -1, -1, 0, ent);
}
/*
***************************************************************
* tlan_probe1
*
* Returns:
* 0 on success, error code on error
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* Parms:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* none
*
* The name is lower case to fit in with all the rest of
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* the netcard_probe names. This function looks for
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* another TLan based adapter, setting it up with the
* allocated device struct if one is found.
* tlan_probe has been ported to the new net API and
* now allocates its own device structure. This function
* is also used by modules.
*
**************************************************************/
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
static int __devinit TLan_probe1(struct pci_dev *pdev,
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
long ioaddr, int irq, int rev,
const struct pci_device_id *ent )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct net_device *dev;
TLanPrivateInfo *priv;
u16 device_id;
int reg, rc = -ENODEV;
[PATCH] drivers/net/tlan.c: #ifdef CONFIG_PCI the PCI specific code drivers/net/tlan.c compiles with CONFIG_PCI=n only with a warning and due to the dead code elimination of gcc. Additionally, this fixes the only compile error I found with CONFIG_PCI=n and the gcc -Werror-implicit-function-declaration flag on i386. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-05 07:37:47 +08:00
#ifdef CONFIG_PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (pdev) {
rc = pci_enable_device(pdev);
if (rc)
return rc;
rc = pci_request_regions(pdev, TLanSignature);
if (rc) {
printk(KERN_ERR "TLAN: Could not reserve IO regions\n");
goto err_out;
}
}
[PATCH] drivers/net/tlan.c: #ifdef CONFIG_PCI the PCI specific code drivers/net/tlan.c compiles with CONFIG_PCI=n only with a warning and due to the dead code elimination of gcc. Additionally, this fixes the only compile error I found with CONFIG_PCI=n and the gcc -Werror-implicit-function-declaration flag on i386. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-05 07:37:47 +08:00
#endif /* CONFIG_PCI */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev = alloc_etherdev(sizeof(TLanPrivateInfo));
if (dev == NULL) {
printk(KERN_ERR "TLAN: Could not allocate memory for device.\n");
rc = -ENOMEM;
goto err_out_regions;
}
SET_NETDEV_DEV(dev, &pdev->dev);
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
priv = netdev_priv(dev);
priv->pciDev = pdev;
WorkStruct: make allyesconfig Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 22:57:56 +08:00
priv->dev = dev;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Is this a PCI device? */
if (pdev) {
u32 pci_io_base = 0;
priv->adapter = &board_info[ent->driver_data];
dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 10:01:15 +08:00
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (rc) {
printk(KERN_ERR "TLAN: No suitable PCI mapping available.\n");
goto err_out_free_dev;
}
for ( reg= 0; reg <= 5; reg ++ ) {
if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) {
pci_io_base = pci_resource_start(pdev, reg);
TLAN_DBG( TLAN_DEBUG_GNRL, "IO mapping is available at %x.\n",
pci_io_base);
break;
}
}
if (!pci_io_base) {
printk(KERN_ERR "TLAN: No IO mappings available\n");
rc = -EIO;
goto err_out_free_dev;
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev->base_addr = pci_io_base;
dev->irq = pdev->irq;
PCI: Change all drivers to use pci_device->revision Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 06:46:36 +08:00
priv->adapterRev = pdev->revision;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pci_set_master(pdev);
pci_set_drvdata(pdev, dev);
} else { /* EISA card */
/* This is a hack. We need to know which board structure
* is suited for this adapter */
device_id = inw(ioaddr + EISA_ID2);
priv->is_eisa = 1;
if (device_id == 0x20F1) {
priv->adapter = &board_info[13]; /* NetFlex-3/E */
priv->adapterRev = 23; /* TLAN 2.3 */
} else {
priv->adapter = &board_info[14];
priv->adapterRev = 10; /* TLAN 1.0 */
}
dev->base_addr = ioaddr;
dev->irq = irq;
}
/* Kernel parameters */
if (dev->mem_start) {
priv->aui = dev->mem_start & 0x01;
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
priv->duplex = ((dev->mem_start & 0x06) == 0x06) ? 0
: (dev->mem_start & 0x06) >> 1;
priv->speed = ((dev->mem_start & 0x18) == 0x18) ? 0
: (dev->mem_start & 0x18) >> 3;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (priv->speed == 0x1) {
priv->speed = TLAN_SPEED_10;
} else if (priv->speed == 0x2) {
priv->speed = TLAN_SPEED_100;
}
debug = priv->debug = dev->mem_end;
} else {
priv->aui = aui[boards_found];
priv->speed = speed[boards_found];
priv->duplex = duplex[boards_found];
priv->debug = debug;
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* This will be used when we get an adapter error from
* within our irq handler */
WorkStruct: make allyesconfig Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 22:57:56 +08:00
INIT_WORK(&priv->tlan_tqueue, TLan_tx_timeout_work);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_lock_init(&priv->lock);
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
rc = TLan_Init(dev);
if (rc) {
printk(KERN_ERR "TLAN: Could not set up device.\n");
goto err_out_free_dev;
}
rc = register_netdev(dev);
if (rc) {
printk(KERN_ERR "TLAN: Could not register device.\n");
goto err_out_uninit;
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLanDevicesInstalled++;
boards_found++;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* pdev is NULL if this is an EISA device */
if (pdev)
tlan_have_pci++;
else {
priv->nextDevice = TLan_Eisa_Devices;
TLan_Eisa_Devices = dev;
tlan_have_eisa++;
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_INFO "TLAN: %s irq=%2d, io=%04x, %s, Rev. %d\n",
dev->name,
(int) dev->irq,
(int) dev->base_addr,
priv->adapter->deviceLabel,
priv->adapterRev);
return 0;
err_out_uninit:
pci_free_consistent(priv->pciDev, priv->dmaSize, priv->dmaStorage,
priv->dmaStorageDMA );
err_out_free_dev:
free_netdev(dev);
err_out_regions:
#ifdef CONFIG_PCI
if (pdev)
pci_release_regions(pdev);
#endif
err_out:
if (pdev)
pci_disable_device(pdev);
return rc;
}
static void TLan_Eisa_Cleanup(void)
{
struct net_device *dev;
TLanPrivateInfo *priv;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
while( tlan_have_eisa ) {
dev = TLan_Eisa_Devices;
priv = netdev_priv(dev);
if (priv->dmaStorage) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
pci_free_consistent(priv->pciDev, priv->dmaSize,
priv->dmaStorage, priv->dmaStorageDMA );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
release_region( dev->base_addr, 0x10);
unregister_netdev( dev );
TLan_Eisa_Devices = priv->nextDevice;
free_netdev( dev );
tlan_have_eisa--;
}
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void __exit tlan_exit(void)
{
pci_unregister_driver(&tlan_driver);
if (tlan_have_eisa)
TLan_Eisa_Cleanup();
}
/* Module loading/unloading */
module_init(tlan_probe);
module_exit(tlan_exit);
/**************************************************************
* TLan_EisaProbe
*
* Returns: 0 on success, 1 otherwise
*
* Parms: None
*
*
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* This functions probes for EISA devices and calls
* TLan_probe1 when one is found.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
*************************************************************/
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
static void __init TLan_EisaProbe (void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
long ioaddr;
int rc = -ENODEV;
int irq;
u16 device_id;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
if (!EISA_bus) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLAN_DBG(TLAN_DEBUG_PROBE, "No EISA bus present\n");
return;
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Loop through all slots of the EISA bus */
for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) {
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n",
(int) ioaddr + 0xC80, inw(ioaddr + EISA_ID));
TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n",
(int) ioaddr + 0xC82, inw(ioaddr + EISA_ID2));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLAN_DBG(TLAN_DEBUG_PROBE, "Probing for EISA adapter at IO: 0x%4x : ",
(int) ioaddr);
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
if (request_region(ioaddr, 0x10, TLanSignature) == NULL)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto out;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
if (inw(ioaddr + EISA_ID) != 0x110E) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
release_region(ioaddr, 0x10);
goto out;
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
device_id = inw(ioaddr + EISA_ID2);
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
if (device_id != 0x20F1 && device_id != 0x40F1) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
release_region (ioaddr, 0x10);
goto out;
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (inb(ioaddr + EISA_CR) != 0x1) { /* Check if adapter is enabled */
release_region (ioaddr, 0x10);
goto out2;
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
if (debug == 0x10)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk("Found one\n");
/* Get irq from board */
switch (inb(ioaddr + 0xCC0)) {
case(0x10):
irq=5;
break;
case(0x20):
irq=9;
break;
case(0x40):
irq=10;
break;
case(0x80):
irq=11;
break;
default:
goto out;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Setup the newly found eisa adapter */
rc = TLan_probe1( NULL, ioaddr, irq,
12, NULL);
continue;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
out:
if (debug == 0x10)
printk("None found\n");
continue;
out2: if (debug == 0x10)
printk("Card found but it is not enabled, skipping\n");
continue;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
} /* TLan_EisaProbe */
#ifdef CONFIG_NET_POLL_CONTROLLER
static void TLan_Poll(struct net_device *dev)
{
disable_irq(dev->irq);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
TLan_HandleInterrupt(dev->irq, dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
enable_irq(dev->irq);
}
#endif
tlan: update to net_device_ops Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-08 09:27:15 +08:00
static const struct net_device_ops TLan_netdev_ops = {
.ndo_open = TLan_Open,
.ndo_stop = TLan_Close,
.ndo_start_xmit = TLan_StartTx,
.ndo_tx_timeout = TLan_tx_timeout,
.ndo_get_stats = TLan_GetStats,
.ndo_set_multicast_list = TLan_SetMulticastList,
.ndo_do_ioctl = TLan_ioctl,
.ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = TLan_Poll,
#endif
};
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/***************************************************************
* TLan_Init
*
* Returns:
* 0 on success, error code otherwise.
* Parms:
* dev The structure of the device to be
* init'ed.
*
* This function completes the initialization of the
* device structure and driver. It reserves the IO
* addresses, allocates memory for the lists and bounce
* buffers, retrieves the MAC address from the eeprom
* and assignes the device's methods.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
**************************************************************/
static int TLan_Init( struct net_device *dev )
{
int dma_size;
int err;
int i;
TLanPrivateInfo *priv;
priv = netdev_priv(dev);
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
dma_size = ( TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS )
* ( sizeof(TLanList) );
tlan: 64bit conversion Make this driver compile cleanly on 64 bit platforms. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:55 +08:00
priv->dmaStorage = pci_alloc_consistent(priv->pciDev,
dma_size, &priv->dmaStorageDMA);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
priv->dmaSize = dma_size;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( priv->dmaStorage == NULL ) {
printk(KERN_ERR "TLAN: Could not allocate lists and buffers for %s.\n",
dev->name );
return -ENOMEM;
}
memset( priv->dmaStorage, 0, dma_size );
tlan: 64bit conversion Make this driver compile cleanly on 64 bit platforms. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:55 +08:00
priv->rxList = (TLanList *) ALIGN((unsigned long)priv->dmaStorage, 8);
priv->rxListDMA = ALIGN(priv->dmaStorageDMA, 8);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
priv->txList = priv->rxList + TLAN_NUM_RX_LISTS;
priv->txListDMA = priv->rxListDMA + sizeof(TLanList) * TLAN_NUM_RX_LISTS;
tlan: 64bit conversion Make this driver compile cleanly on 64 bit platforms. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:55 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err = 0;
for ( i = 0; i < 6 ; i++ )
err |= TLan_EeReadByte( dev,
(u8) priv->adapter->addrOfs + i,
(u8 *) &dev->dev_addr[i] );
if ( err ) {
printk(KERN_ERR "TLAN: %s: Error reading MAC from eeprom: %d\n",
dev->name,
err );
}
dev->addr_len = 6;
netif_carrier_off(dev);
/* Device methods */
tlan: update to net_device_ops Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-08 09:27:15 +08:00
dev->netdev_ops = &TLan_netdev_ops;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev->watchdog_timeo = TX_TIMEOUT;
return 0;
} /* TLan_Init */
/***************************************************************
* TLan_Open
*
* Returns:
* 0 on success, error code otherwise.
* Parms:
* dev Structure of device to be opened.
*
* This routine puts the driver and TLAN adapter in a
* state where it is ready to send and receive packets.
* It allocates the IRQ, resets and brings the adapter
* out of reset, and allows interrupts. It also delays
* the startup for autonegotiation or sends a Rx GO
* command to the adapter, as appropriate.
*
**************************************************************/
static int TLan_Open( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
int err;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
priv->tlanRev = TLan_DioRead8( dev->base_addr, TLAN_DEF_REVISION );
tlan: proper shared IRQ support Handle shared IRQ correctly. If IRQ is shared, it typically will show up as an IRQ with an empty status field. So check in driver and handle it without crapping out with invalid interrupt message. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:57 +08:00
err = request_irq( dev->irq, TLan_HandleInterrupt, IRQF_SHARED,
dev->name, dev );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( err ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
pr_err("TLAN: Cannot open %s because IRQ %d is already in use.\n",
dev->name, dev->irq );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return err;
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
init_timer(&priv->timer);
netif_start_queue(dev);
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* NOTE: It might not be necessary to read the stats before a
reset if you don't care what the values are.
*/
TLan_ResetLists( dev );
TLan_ReadAndClearStats( dev, TLAN_IGNORE );
TLan_ResetAdapter( dev );
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Opened. TLAN Chip Rev: %x\n",
dev->name, priv->tlanRev );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
} /* TLan_Open */
/**************************************************************
* TLan_ioctl
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Returns:
* 0 on success, error code otherwise
* Params:
* dev structure of device to receive ioctl.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* rq ifreq structure to hold userspace data.
*
* cmd ioctl command.
*
*
*************************************************************/
static int TLan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
TLanPrivateInfo *priv = netdev_priv(dev);
struct mii_ioctl_data *data = if_mii(rq);
u32 phy = priv->phy[priv->phyNum];
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!priv->phyOnline)
return -EAGAIN;
switch(cmd) {
case SIOCGMIIPHY: /* Get address of MII PHY in use. */
data->phy_id = phy;
case SIOCGMIIREG: /* Read MII PHY register. */
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLan_MiiReadReg(dev, data->phy_id & 0x1f,
data->reg_num & 0x1f, &data->val_out);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case SIOCSMIIREG: /* Write MII PHY register. */
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLan_MiiWriteReg(dev, data->phy_id & 0x1f,
data->reg_num & 0x1f, data->val_in);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
default:
return -EOPNOTSUPP;
}
} /* tlan_ioctl */
/***************************************************************
* TLan_tx_timeout
*
* Returns: nothing
*
* Params:
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* dev structure of device which timed out
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* during transmit.
*
**************************************************************/
static void TLan_tx_timeout(struct net_device *dev)
{
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Transmit timed out.\n", dev->name);
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Ok so we timed out, lets see what we can do about it...*/
TLan_FreeLists( dev );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
TLan_ResetLists( dev );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLan_ReadAndClearStats( dev, TLAN_IGNORE );
TLan_ResetAdapter( dev );
dev->trans_start = jiffies;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
netif_wake_queue( dev );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
WorkStruct: make allyesconfig Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 22:57:56 +08:00
/***************************************************************
* TLan_tx_timeout_work
*
* Returns: nothing
*
* Params:
* work work item of device which timed out
*
**************************************************************/
static void TLan_tx_timeout_work(struct work_struct *work)
{
TLanPrivateInfo *priv =
container_of(work, TLanPrivateInfo, tlan_tqueue);
TLan_tx_timeout(priv->dev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/***************************************************************
* TLan_StartTx
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Returns:
* 0 on success, non-zero on failure.
* Parms:
* skb A pointer to the sk_buff containing the
* frame to be sent.
* dev The device to send the data on.
*
* This function adds a frame to the Tx list to be sent
* ASAP. First it verifies that the adapter is ready and
* there is room in the queue. Then it sets up the next
* available list, copies the frame to the corresponding
* buffer. If the adapter Tx channel is idle, it gives
* the adapter a Tx Go command on the list, otherwise it
* sets the forward address of the previous list to point
* to this one. Then it frees the sk_buff.
*
**************************************************************/
netdev: convert bulk of drivers to netdev_tx_t In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 03:50:58 +08:00
static netdev_tx_t TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
TLanPrivateInfo *priv = netdev_priv(dev);
dma_addr_t tail_list_phys;
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
TLanList *tail_list;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned long flags;
tlan: Fix small (< 64 bytes) datagram transmissions The TLAN chip does not support tranmissions smaller than 64 bytes. Smaller transfers need to be padded up to that size. This was broken by commit id 41873e9aff0632d80c74380d58a89e8d420151bd ("tlan: get rid of padding buffer"). <URL:http://bugzilla.kernel.org/show_bug.cgi?id=11754> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 17:44:05 +08:00
unsigned int txlen;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( ! priv->phyOnline ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n",
dev->name );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev_kfree_skb_any(skb);
net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functions This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23 14:03:08 +08:00
return NETDEV_TX_OK;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
tlan: get rid of padding buffer Use skb_padto to pad frames, this avoid allocation of separate buffer just for dma of the extra bytes. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:52 +08:00
if (skb_padto(skb, TLAN_MIN_FRAME_SIZE))
net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functions This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23 14:03:08 +08:00
return NETDEV_TX_OK;
tlan: Fix small (< 64 bytes) datagram transmissions The TLAN chip does not support tranmissions smaller than 64 bytes. Smaller transfers need to be padded up to that size. This was broken by commit id 41873e9aff0632d80c74380d58a89e8d420151bd ("tlan: get rid of padding buffer"). <URL:http://bugzilla.kernel.org/show_bug.cgi?id=11754> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 17:44:05 +08:00
txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE);
tlan: get rid of padding buffer Use skb_padto to pad frames, this avoid allocation of separate buffer just for dma of the extra bytes. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:52 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tail_list = priv->txList + priv->txTail;
tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( tail_list->cStat != TLAN_CSTAT_UNUSED ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLAN_DBG( TLAN_DEBUG_TX,
"TRANSMIT: %s is busy (Head=%d Tail=%d)\n",
dev->name, priv->txHead, priv->txTail );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
netif_stop_queue(dev);
priv->txBusyCount++;
net: use symbolic values for ndo_start_xmit() return codes Convert magic values 1 and -1 to NETDEV_TX_BUSY and NETDEV_TX_LOCKED respectively. 0 (NETDEV_TX_OK) is not changed to keep the noise down, except in very few cases where its in direct proximity to one of the other values. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-12 14:22:29 +08:00
return NETDEV_TX_BUSY;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
tail_list->forward = 0;
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
tail_list->buffer[0].address = pci_map_single(priv->pciDev,
skb->data, txlen,
PCI_DMA_TODEVICE);
TLan_StoreSKB(tail_list, skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tlan: Fix small (< 64 bytes) datagram transmissions The TLAN chip does not support tranmissions smaller than 64 bytes. Smaller transfers need to be padded up to that size. This was broken by commit id 41873e9aff0632d80c74380d58a89e8d420151bd ("tlan: get rid of padding buffer"). <URL:http://bugzilla.kernel.org/show_bug.cgi?id=11754> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 17:44:05 +08:00
tail_list->frameSize = (u16) txlen;
tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen;
tlan: get rid of padding buffer Use skb_padto to pad frames, this avoid allocation of separate buffer just for dma of the extra bytes. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:52 +08:00
tail_list->buffer[1].count = 0;
tail_list->buffer[1].address = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_lock_irqsave(&priv->lock, flags);
tail_list->cStat = TLAN_CSTAT_READY;
if ( ! priv->txInProgress ) {
priv->txInProgress = 1;
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLAN_DBG( TLAN_DEBUG_TX,
"TRANSMIT: Starting TX on buffer %d\n", priv->txTail );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
outl( tail_list_phys, dev->base_addr + TLAN_CH_PARM );
outl( TLAN_HC_GO, dev->base_addr + TLAN_HOST_CMD );
} else {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Adding buffer %d to TX channel\n",
priv->txTail );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( priv->txTail == 0 ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
( priv->txList + ( TLAN_NUM_TX_LISTS - 1 ) )->forward
= tail_list_phys;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
( priv->txList + ( priv->txTail - 1 ) )->forward
= tail_list_phys;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
spin_unlock_irqrestore(&priv->lock, flags);
CIRC_INC( priv->txTail, TLAN_NUM_TX_LISTS );
dev->trans_start = jiffies;
net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functions This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23 14:03:08 +08:00
return NETDEV_TX_OK;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* TLan_StartTx */
/***************************************************************
* TLan_HandleInterrupt
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
* Returns:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Nothing
* Parms:
* irq The line on which the interrupt
* occurred.
* dev_id A pointer to the device assigned to
* this irq line.
*
* This function handles an interrupt generated by its
* assigned TLAN adapter. The function deactivates
* interrupts on its adapter, records the type of
* interrupt, executes the appropriate subhandler, and
* acknowdges the interrupt to the adapter (thus
* re-enabling adapter interrupts.
*
**************************************************************/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t TLan_HandleInterrupt(int irq, void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
tlan: proper shared IRQ support Handle shared IRQ correctly. If IRQ is shared, it typically will show up as an IRQ with an empty status field. So check in driver and handle it without crapping out with invalid interrupt message. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:57 +08:00
struct net_device *dev = dev_id;
TLanPrivateInfo *priv = netdev_priv(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u16 host_int;
tlan: proper shared IRQ support Handle shared IRQ correctly. If IRQ is shared, it typically will show up as an IRQ with an empty status field. So check in driver and handle it without crapping out with invalid interrupt message. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:57 +08:00
u16 type;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_lock(&priv->lock);
host_int = inw( dev->base_addr + TLAN_HOST_INT );
type = ( host_int & TLAN_HI_IT_MASK ) >> 2;
tlan: proper shared IRQ support Handle shared IRQ correctly. If IRQ is shared, it typically will show up as an IRQ with an empty status field. So check in driver and handle it without crapping out with invalid interrupt message. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:57 +08:00
if ( type ) {
u32 ack;
u32 host_cmd;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tlan: proper shared IRQ support Handle shared IRQ correctly. If IRQ is shared, it typically will show up as an IRQ with an empty status field. So check in driver and handle it without crapping out with invalid interrupt message. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:57 +08:00
outw( host_int, dev->base_addr + TLAN_HOST_INT );
ack = TLanIntVector[type]( dev, host_int );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tlan: proper shared IRQ support Handle shared IRQ correctly. If IRQ is shared, it typically will show up as an IRQ with an empty status field. So check in driver and handle it without crapping out with invalid interrupt message. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:57 +08:00
if ( ack ) {
host_cmd = TLAN_HC_ACK | ack | ( type << 18 );
outl( host_cmd, dev->base_addr + TLAN_HOST_CMD );
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
spin_unlock(&priv->lock);
tlan: proper shared IRQ support Handle shared IRQ correctly. If IRQ is shared, it typically will show up as an IRQ with an empty status field. So check in driver and handle it without crapping out with invalid interrupt message. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:57 +08:00
return IRQ_RETVAL(type);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* TLan_HandleInterrupts */
/***************************************************************
* TLan_Close
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Returns:
* An error code.
* Parms:
* dev The device structure of the device to
* close.
*
* This function shuts down the adapter. It records any
* stats, puts the adapter into reset state, deactivates
* its time as needed, and frees the irq it is using.
*
**************************************************************/
static int TLan_Close(struct net_device *dev)
{
TLanPrivateInfo *priv = netdev_priv(dev);
netif_stop_queue(dev);
priv->neg_be_verbose = 0;
TLan_ReadAndClearStats( dev, TLAN_RECORD );
outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
if ( priv->timer.function != NULL ) {
del_timer_sync( &priv->timer );
priv->timer.function = NULL;
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
free_irq( dev->irq, dev );
TLan_FreeLists( dev );
TLAN_DBG( TLAN_DEBUG_GNRL, "Device %s closed.\n", dev->name );
return 0;
} /* TLan_Close */
/***************************************************************
* TLan_GetStats
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Returns:
* A pointer to the device's statistics structure.
* Parms:
* dev The device structure to return the
* stats for.
*
* This function updates the devices statistics by reading
* the TLAN chip's onboard registers. Then it returns the
* address of the statistics structure.
*
**************************************************************/
static struct net_device_stats *TLan_GetStats( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
int i;
/* Should only read stats if open ? */
TLan_ReadAndClearStats( dev, TLAN_RECORD );
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: %s EOC count = %d\n", dev->name,
priv->rxEocCount );
TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s Busy count = %d\n", dev->name,
priv->txBusyCount );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( debug & TLAN_DEBUG_GNRL ) {
TLan_PrintDio( dev->base_addr );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
TLan_PhyPrint( dev );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if ( debug & TLAN_DEBUG_LIST ) {
for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ )
TLan_PrintList( priv->rxList + i, "RX", i );
for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ )
TLan_PrintList( priv->txList + i, "TX", i );
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
tlan: use netdevice stats Use new netdevice common stats area. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:53 +08:00
return &dev->stats;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* TLan_GetStats */
/***************************************************************
* TLan_SetMulticastList
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Returns:
* Nothing
* Parms:
* dev The device structure to set the
* multicast list for.
*
* This function sets the TLAN adaptor to various receive
* modes. If the IFF_PROMISC flag is set, promiscuous
* mode is acitviated. Otherwise, promiscuous mode is
* turned off. If the IFF_ALLMULTI flag is set, then
* the hash table is set to receive all group addresses.
* Otherwise, the first three multicast addresses are
* stored in AREG_1-3, and the rest are selected via the
* hash table, as necessary.
*
**************************************************************/
static void TLan_SetMulticastList( struct net_device *dev )
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
{
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct dev_mc_list *dmi = dev->mc_list;
u32 hash1 = 0;
u32 hash2 = 0;
int i;
u32 offset;
u8 tmp;
if ( dev->flags & IFF_PROMISC ) {
tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLan_DioWrite8( dev->base_addr,
TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLan_DioWrite8( dev->base_addr,
TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( dev->flags & IFF_ALLMULTI ) {
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
for ( i = 0; i < 3; i++ )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLan_SetMac( dev, i + 1, NULL );
TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, 0xFFFFFFFF );
TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, 0xFFFFFFFF );
} else {
for ( i = 0; i < dev->mc_count; i++ ) {
if ( i < 3 ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLan_SetMac( dev, i + 1,
(char *) &dmi->dmi_addr );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
offset = TLan_HashFunc( (u8 *) &dmi->dmi_addr );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
if ( offset < 32 )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hash1 |= ( 1 << offset );
else
hash2 |= ( 1 << ( offset - 32 ) );
}
dmi = dmi->next;
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
for ( ; i < 3; i++ )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLan_SetMac( dev, i + 1, NULL );
TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, hash1 );
TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, hash2 );
}
}
} /* TLan_SetMulticastList */
/*****************************************************************************
******************************************************************************
ThunderLAN Driver Interrupt Vectors and Table
Please see Chap. 4, "Interrupt Handling" of the "ThunderLAN
Programmer's Guide" for more informations on handling interrupts
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
generated by TLAN based adapters.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
******************************************************************************
*****************************************************************************/
/***************************************************************
* TLan_HandleTxEOF
*
* Returns:
* 1
* Parms:
* dev Device assigned the IRQ that was
* raised.
* host_int The contents of the HOST_INT
* port.
*
* This function handles Tx EOF interrupts which are raised
* by the adapter when it has completed sending the
* contents of a buffer. If detemines which list/buffer
* was completed and resets it. If the buffer was the last
* in the channel (EOC), then the function checks to see if
* another buffer is ready to send, and if so, sends a Tx
* Go command. Finally, the driver activates/continues the
* activity LED.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
TLanPrivateInfo *priv = netdev_priv(dev);
int eoc = 0;
TLanList *head_list;
dma_addr_t head_list_phys;
u32 ack = 0;
u16 tmpCStat;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Handling TX EOF (Head=%d Tail=%d)\n",
priv->txHead, priv->txTail );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
head_list = priv->txList + priv->txHead;
while (((tmpCStat = head_list->cStat ) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) {
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
struct sk_buff *skb = TLan_GetSKB(head_list);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ack++;
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
pci_unmap_single(priv->pciDev, head_list->buffer[0].address,
max(skb->len,
(unsigned int)TLAN_MIN_FRAME_SIZE),
PCI_DMA_TODEVICE);
dev_kfree_skb_any(skb);
head_list->buffer[8].address = 0;
head_list->buffer[9].address = 0;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( tmpCStat & TLAN_CSTAT_EOC )
eoc = 1;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
tlan: use netdevice stats Use new netdevice common stats area. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:53 +08:00
dev->stats.tx_bytes += head_list->frameSize;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
head_list->cStat = TLAN_CSTAT_UNUSED;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
netif_start_queue(dev);
CIRC_INC( priv->txHead, TLAN_NUM_TX_LISTS );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
head_list = priv->txList + priv->txHead;
}
if (!ack)
printk(KERN_INFO "TLAN: Received interrupt for uncompleted TX frame.\n");
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( eoc ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLAN_DBG( TLAN_DEBUG_TX,
"TRANSMIT: Handling TX EOC (Head=%d Tail=%d)\n",
priv->txHead, priv->txTail );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
head_list = priv->txList + priv->txHead;
head_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txHead;
if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
outl(head_list_phys, dev->base_addr + TLAN_CH_PARM );
ack |= TLAN_HC_GO;
} else {
priv->txInProgress = 0;
}
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLan_DioWrite8( dev->base_addr,
TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( priv->timer.function == NULL ) {
priv->timer.function = &TLan_Timer;
priv->timer.data = (unsigned long) dev;
priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
priv->timerSetAt = jiffies;
priv->timerType = TLAN_TIMER_ACTIVITY;
add_timer(&priv->timer);
} else if ( priv->timerType == TLAN_TIMER_ACTIVITY ) {
priv->timerSetAt = jiffies;
}
}
return ack;
} /* TLan_HandleTxEOF */
/***************************************************************
* TLan_HandleStatOverflow
*
* Returns:
* 1
* Parms:
* dev Device assigned the IRQ that was
* raised.
* host_int The contents of the HOST_INT
* port.
*
* This function handles the Statistics Overflow interrupt
* which means that one or more of the TLAN statistics
* registers has reached 1/2 capacity and needs to be read.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
TLan_ReadAndClearStats( dev, TLAN_RECORD );
return 1;
} /* TLan_HandleStatOverflow */
/***************************************************************
* TLan_HandleRxEOF
*
* Returns:
* 1
* Parms:
* dev Device assigned the IRQ that was
* raised.
* host_int The contents of the HOST_INT
* port.
*
* This function handles the Rx EOF interrupt which
* indicates a frame has been received by the adapter from
* the net and the frame has been transferred to memory.
* The function determines the bounce buffer the frame has
* been loaded into, creates a new sk_buff big enough to
* hold the frame, and sends it to protocol stack. It
* then resets the used buffer and appends it to the end
* of the list. If the frame was the last in the Rx
* channel (EOC), the function restarts the receive channel
* by sending an Rx Go command to the adapter. Then it
* activates/continues the activity LED.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
TLanPrivateInfo *priv = netdev_priv(dev);
u32 ack = 0;
int eoc = 0;
TLanList *head_list;
struct sk_buff *skb;
TLanList *tail_list;
u16 tmpCStat;
dma_addr_t head_list_phys;
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: Handling RX EOF (Head=%d Tail=%d)\n",
priv->rxHead, priv->rxTail );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
head_list = priv->rxList + priv->rxHead;
head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
while (((tmpCStat = head_list->cStat) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) {
tlan: manage rx allocation failure better Rx allocation failure at runtime is non-fatal. For normal Rx frame, it just reuses the buffer, and during setup it just continues with a smaller receive buffer pool. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:56 +08:00
dma_addr_t frameDma = head_list->buffer[0].address;
u32 frameSize = head_list->frameSize;
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
struct sk_buff *new_skb;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ack++;
if (tmpCStat & TLAN_CSTAT_EOC)
eoc = 1;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
net: Use netdev_alloc_skb_ip_align() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13 13:34:20 +08:00
new_skb = netdev_alloc_skb_ip_align(dev,
TLAN_MAX_FRAME_SIZE + 5);
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
if ( !new_skb )
goto drop_and_reuse;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
skb = TLan_GetSKB(head_list);
pci_unmap_single(priv->pciDev, frameDma,
TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
skb_put( skb, frameSize );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
dev->stats.rx_bytes += frameSize;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
skb->protocol = eth_type_trans( skb, dev );
netif_rx( skb );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
head_list->buffer[0].address = pci_map_single(priv->pciDev,
new_skb->data,
TLAN_MAX_FRAME_SIZE,
PCI_DMA_FROMDEVICE);
tlan: 64bit conversion Make this driver compile cleanly on 64 bit platforms. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:55 +08:00
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
TLan_StoreSKB(head_list, new_skb);
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
drop_and_reuse:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
head_list->forward = 0;
head_list->cStat = 0;
tail_list = priv->rxList + priv->rxTail;
tail_list->forward = head_list_phys;
CIRC_INC( priv->rxHead, TLAN_NUM_RX_LISTS );
CIRC_INC( priv->rxTail, TLAN_NUM_RX_LISTS );
head_list = priv->rxList + priv->rxHead;
head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
}
if (!ack)
printk(KERN_INFO "TLAN: Received interrupt for uncompleted RX frame.\n");
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
if ( eoc ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLAN_DBG( TLAN_DEBUG_RX,
"RECEIVE: Handling RX EOC (Head=%d Tail=%d)\n",
priv->rxHead, priv->rxTail );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
head_list = priv->rxList + priv->rxHead;
head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
outl(head_list_phys, dev->base_addr + TLAN_CH_PARM );
ack |= TLAN_HC_GO | TLAN_HC_RT;
priv->rxEocCount++;
}
if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLan_DioWrite8( dev->base_addr,
TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( priv->timer.function == NULL ) {
priv->timer.function = &TLan_Timer;
priv->timer.data = (unsigned long) dev;
priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
priv->timerSetAt = jiffies;
priv->timerType = TLAN_TIMER_ACTIVITY;
add_timer(&priv->timer);
} else if ( priv->timerType == TLAN_TIMER_ACTIVITY ) {
priv->timerSetAt = jiffies;
}
}
return ack;
} /* TLan_HandleRxEOF */
/***************************************************************
* TLan_HandleDummy
*
* Returns:
* 1
* Parms:
* dev Device assigned the IRQ that was
* raised.
* host_int The contents of the HOST_INT
* port.
*
* This function handles the Dummy interrupt, which is
* raised whenever a test interrupt is generated by setting
* the Req_Int bit of HOST_CMD to 1.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
printk( "TLAN: Test interrupt on %s.\n", dev->name );
return 1;
} /* TLan_HandleDummy */
/***************************************************************
* TLan_HandleTxEOC
*
* Returns:
* 1
* Parms:
* dev Device assigned the IRQ that was
* raised.
* host_int The contents of the HOST_INT
* port.
*
* This driver is structured to determine EOC occurrences by
* reading the CSTAT member of the list structure. Tx EOC
* interrupts are disabled via the DIO INTDIS register.
* However, TLAN chips before revision 3.0 didn't have this
* functionality, so process EOC events if this is the
* case.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
TLanPrivateInfo *priv = netdev_priv(dev);
TLanList *head_list;
dma_addr_t head_list_phys;
u32 ack = 1;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
host_int = 0;
if ( priv->tlanRev < 0x30 ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLAN_DBG( TLAN_DEBUG_TX,
"TRANSMIT: Handling TX EOC (Head=%d Tail=%d) -- IRQ\n",
priv->txHead, priv->txTail );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
head_list = priv->txList + priv->txHead;
head_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txHead;
if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
netif_stop_queue(dev);
outl( head_list_phys, dev->base_addr + TLAN_CH_PARM );
ack |= TLAN_HC_GO;
} else {
priv->txInProgress = 0;
}
}
return ack;
} /* TLan_HandleTxEOC */
/***************************************************************
* TLan_HandleStatusCheck
*
* Returns:
* 0 if Adapter check, 1 if Network Status check.
* Parms:
* dev Device assigned the IRQ that was
* raised.
* host_int The contents of the HOST_INT
* port.
*
* This function handles Adapter Check/Network Status
* interrupts generated by the adapter. It checks the
* vector in the HOST_INT register to determine if it is
* an Adapter Check interrupt. If so, it resets the
* adapter. Otherwise it clears the status registers
* and services the PHY.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
{
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLanPrivateInfo *priv = netdev_priv(dev);
u32 ack;
u32 error;
u8 net_sts;
u32 phy;
u16 tlphy_ctl;
u16 tlphy_sts;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ack = 1;
if ( host_int & TLAN_HI_IV_MASK ) {
netif_stop_queue( dev );
error = inl( dev->base_addr + TLAN_CH_PARM );
printk( "TLAN: %s: Adaptor Error = 0x%x\n", dev->name, error );
TLan_ReadAndClearStats( dev, TLAN_RECORD );
outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
schedule_work(&priv->tlan_tqueue);
netif_wake_queue(dev);
ack = 0;
} else {
TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Status Check\n", dev->name );
phy = priv->phy[priv->phyNum];
net_sts = TLan_DioRead8( dev->base_addr, TLAN_NET_STS );
if ( net_sts ) {
TLan_DioWrite8( dev->base_addr, TLAN_NET_STS, net_sts );
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Net_Sts = %x\n",
dev->name, (unsigned) net_sts );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if ( ( net_sts & TLAN_NET_STS_MIRQ ) && ( priv->phyNum == 0 ) ) {
TLan_MiiReadReg( dev, phy, TLAN_TLPHY_STS, &tlphy_sts );
TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl );
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
if ( ! ( tlphy_sts & TLAN_TS_POLOK ) &&
! ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tlphy_ctl |= TLAN_TC_SWAPOL;
TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
} else if ( ( tlphy_sts & TLAN_TS_POLOK )
&& ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tlphy_ctl &= ~TLAN_TC_SWAPOL;
TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
}
if (debug) {
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
TLan_PhyPrint( dev );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
}
return ack;
} /* TLan_HandleStatusCheck */
/***************************************************************
* TLan_HandleRxEOC
*
* Returns:
* 1
* Parms:
* dev Device assigned the IRQ that was
* raised.
* host_int The contents of the HOST_INT
* port.
*
* This driver is structured to determine EOC occurrences by
* reading the CSTAT member of the list structure. Rx EOC
* interrupts are disabled via the DIO INTDIS register.
* However, TLAN chips before revision 3.0 didn't have this
* CSTAT member or a INTDIS register, so if this chip is
* pre-3.0, process EOC interrupts normally.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
TLanPrivateInfo *priv = netdev_priv(dev);
dma_addr_t head_list_phys;
u32 ack = 1;
if ( priv->tlanRev < 0x30 ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLAN_DBG( TLAN_DEBUG_RX,
"RECEIVE: Handling RX EOC (Head=%d Tail=%d) -- IRQ\n",
priv->rxHead, priv->rxTail );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
outl( head_list_phys, dev->base_addr + TLAN_CH_PARM );
ack |= TLAN_HC_GO | TLAN_HC_RT;
priv->rxEocCount++;
}
return ack;
} /* TLan_HandleRxEOC */
/*****************************************************************************
******************************************************************************
ThunderLAN Driver Timer Function
******************************************************************************
*****************************************************************************/
/***************************************************************
* TLan_Timer
*
* Returns:
* Nothing
* Parms:
* data A value given to add timer when
* add_timer was called.
*
* This function handles timed functionality for the
* TLAN driver. The two current timer uses are for
* delaying for autonegotionation and driving the ACT LED.
* - Autonegotiation requires being allowed about
* 2 1/2 seconds before attempting to transmit a
* packet. It would be a very bad thing to hang
* the kernel this long, so the driver doesn't
* allow transmission 'til after this time, for
* certain PHYs. It would be much nicer if all
* PHYs were interrupt-capable like the internal
* PHY.
* - The ACT LED, which shows adapter activity, is
* driven by the driver, and so must be left on
* for a short period to power up the LED so it
* can be seen. This delay can be changed by
* changing the TLAN_TIMER_ACT_DELAY in tlan.h,
* if desired. 100 ms produces a slightly
* sluggish response.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_Timer( unsigned long data )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct net_device *dev = (struct net_device *) data;
TLanPrivateInfo *priv = netdev_priv(dev);
u32 elapsed;
unsigned long flags = 0;
priv->timer.function = NULL;
switch ( priv->timerType ) {
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
#ifdef MONITOR
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case TLAN_TIMER_LINK_BEAT:
TLan_PhyMonitor( dev );
break;
#endif
case TLAN_TIMER_PHY_PDOWN:
TLan_PhyPowerDown( dev );
break;
case TLAN_TIMER_PHY_PUP:
TLan_PhyPowerUp( dev );
break;
case TLAN_TIMER_PHY_RESET:
TLan_PhyReset( dev );
break;
case TLAN_TIMER_PHY_START_LINK:
TLan_PhyStartLink( dev );
break;
case TLAN_TIMER_PHY_FINISH_AN:
TLan_PhyFinishAutoNeg( dev );
break;
case TLAN_TIMER_FINISH_RESET:
TLan_FinishReset( dev );
break;
case TLAN_TIMER_ACTIVITY:
spin_lock_irqsave(&priv->lock, flags);
if ( priv->timer.function == NULL ) {
elapsed = jiffies - priv->timerSetAt;
if ( elapsed >= TLAN_TIMER_ACT_DELAY ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLan_DioWrite8( dev->base_addr,
TLAN_LED_REG, TLAN_LED_LINK );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
priv->timer.function = &TLan_Timer;
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
priv->timer.expires = priv->timerSetAt
+ TLAN_TIMER_ACT_DELAY;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_unlock_irqrestore(&priv->lock, flags);
add_timer( &priv->timer );
break;
}
}
spin_unlock_irqrestore(&priv->lock, flags);
break;
default:
break;
}
} /* TLan_Timer */
/*****************************************************************************
******************************************************************************
ThunderLAN Driver Adapter Related Routines
******************************************************************************
*****************************************************************************/
/***************************************************************
* TLan_ResetLists
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Returns:
* Nothing
* Parms:
* dev The device structure with the list
* stuctures to be reset.
*
* This routine sets the variables associated with managing
* the TLAN lists to their initial values.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_ResetLists( struct net_device *dev )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
TLanPrivateInfo *priv = netdev_priv(dev);
int i;
TLanList *list;
dma_addr_t list_phys;
struct sk_buff *skb;
priv->txHead = 0;
priv->txTail = 0;
for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) {
list = priv->txList + i;
list->cStat = TLAN_CSTAT_UNUSED;
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
list->buffer[0].address = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
list->buffer[2].count = 0;
list->buffer[2].address = 0;
list->buffer[8].address = 0;
list->buffer[9].address = 0;
}
priv->rxHead = 0;
priv->rxTail = TLAN_NUM_RX_LISTS - 1;
for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) {
list = priv->rxList + i;
list_phys = priv->rxListDMA + sizeof(TLanList) * i;
list->cStat = TLAN_CSTAT_READY;
list->frameSize = TLAN_MAX_FRAME_SIZE;
list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
net: Use netdev_alloc_skb_ip_align() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13 13:34:20 +08:00
skb = netdev_alloc_skb_ip_align(dev, TLAN_MAX_FRAME_SIZE + 5);
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
if ( !skb ) {
pr_err("TLAN: out of memory for received data.\n" );
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
list->buffer[0].address = pci_map_single(priv->pciDev,
skb->data,
TLAN_MAX_FRAME_SIZE,
PCI_DMA_FROMDEVICE);
TLan_StoreSKB(list, skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
list->buffer[1].count = 0;
list->buffer[1].address = 0;
tlan: manage rx allocation failure better Rx allocation failure at runtime is non-fatal. For normal Rx frame, it just reuses the buffer, and during setup it just continues with a smaller receive buffer pool. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:56 +08:00
list->forward = list_phys + sizeof(TLanList);
}
/* in case ran out of memory early, clear bits */
while (i < TLAN_NUM_RX_LISTS) {
TLan_StoreSKB(priv->rxList + i, NULL);
++i;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
tlan: manage rx allocation failure better Rx allocation failure at runtime is non-fatal. For normal Rx frame, it just reuses the buffer, and during setup it just continues with a smaller receive buffer pool. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:56 +08:00
list->forward = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* TLan_ResetLists */
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_FreeLists( struct net_device *dev )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
TLanPrivateInfo *priv = netdev_priv(dev);
int i;
TLanList *list;
struct sk_buff *skb;
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) {
list = priv->txList + i;
skb = TLan_GetSKB(list);
if ( skb ) {
pci_unmap_single(
priv->pciDev,
list->buffer[0].address,
max(skb->len,
(unsigned int)TLAN_MIN_FRAME_SIZE),
PCI_DMA_TODEVICE);
dev_kfree_skb_any( skb );
list->buffer[8].address = 0;
list->buffer[9].address = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tlan: Remove broken support for big buffers The big rx/tx buffer support is broken and unlikely to be very useful as such. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 07:24:05 +08:00
for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) {
list = priv->rxList + i;
skb = TLan_GetSKB(list);
if ( skb ) {
pci_unmap_single(priv->pciDev,
list->buffer[0].address,
TLAN_MAX_FRAME_SIZE,
PCI_DMA_FROMDEVICE);
dev_kfree_skb_any( skb );
list->buffer[8].address = 0;
list->buffer[9].address = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
} /* TLan_FreeLists */
/***************************************************************
* TLan_PrintDio
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Returns:
* Nothing
* Parms:
* io_base Base IO port of the device of
* which to print DIO registers.
*
* This function prints out all the internal (DIO)
* registers of a TLAN chip.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_PrintDio( u16 io_base )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
u32 data0, data1;
int i;
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
printk( "TLAN: Contents of internal registers for io base 0x%04hx.\n",
io_base );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk( "TLAN: Off. +0 +4\n" );
for ( i = 0; i < 0x4C; i+= 8 ) {
data0 = TLan_DioRead32( io_base, i );
data1 = TLan_DioRead32( io_base, i + 0x4 );
printk( "TLAN: 0x%02x 0x%08x 0x%08x\n", i, data0, data1 );
}
} /* TLan_PrintDio */
/***************************************************************
* TLan_PrintList
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Returns:
* Nothing
* Parms:
* list A pointer to the TLanList structure to
* be printed.
* type A string to designate type of list,
* "Rx" or "Tx".
* num The index of the list.
*
* This function prints out the contents of the list
* pointed to by the list parameter.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_PrintList( TLanList *list, char *type, int num)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int i;
tlan: 64bit conversion Make this driver compile cleanly on 64 bit platforms. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:55 +08:00
printk( "TLAN: %s List %d at %p\n", type, num, list );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk( "TLAN: Forward = 0x%08x\n", list->forward );
printk( "TLAN: CSTAT = 0x%04hx\n", list->cStat );
printk( "TLAN: Frame Size = 0x%04hx\n", list->frameSize );
/* for ( i = 0; i < 10; i++ ) { */
for ( i = 0; i < 2; i++ ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
printk( "TLAN: Buffer[%d].count, addr = 0x%08x, 0x%08x\n",
i, list->buffer[i].count, list->buffer[i].address );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
} /* TLan_PrintList */
/***************************************************************
* TLan_ReadAndClearStats
*
* Returns:
* Nothing
* Parms:
* dev Pointer to device structure of adapter
* to which to read stats.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* record Flag indicating whether to add
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* This functions reads all the internal status registers
* of the TLAN chip, which clears them as a side effect.
* It then either adds the values to the device's status
* struct, or discards them, depending on whether record
* is TLAN_RECORD (!=0) or TLAN_IGNORE (==0).
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_ReadAndClearStats( struct net_device *dev, int record )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
u32 tx_good, tx_under;
u32 rx_good, rx_over;
u32 def_tx, crc, code;
u32 multi_col, single_col;
u32 excess_col, late_col, loss;
outw( TLAN_GOOD_TX_FRMS, dev->base_addr + TLAN_DIO_ADR );
tx_good = inb( dev->base_addr + TLAN_DIO_DATA );
tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
tx_under = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
outw( TLAN_GOOD_RX_FRMS, dev->base_addr + TLAN_DIO_ADR );
rx_good = inb( dev->base_addr + TLAN_DIO_DATA );
rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
rx_over = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
outw( TLAN_DEFERRED_TX, dev->base_addr + TLAN_DIO_ADR );
def_tx = inb( dev->base_addr + TLAN_DIO_DATA );
def_tx += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
crc = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
code = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
outw( TLAN_MULTICOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
multi_col = inb( dev->base_addr + TLAN_DIO_DATA );
multi_col += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
single_col = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
single_col += inb( dev->base_addr + TLAN_DIO_DATA + 3 ) << 8;
outw( TLAN_EXCESSCOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
excess_col = inb( dev->base_addr + TLAN_DIO_DATA );
late_col = inb( dev->base_addr + TLAN_DIO_DATA + 1 );
loss = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
if ( record ) {
tlan: use netdevice stats Use new netdevice common stats area. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:53 +08:00
dev->stats.rx_packets += rx_good;
dev->stats.rx_errors += rx_over + crc + code;
dev->stats.tx_packets += tx_good;
dev->stats.tx_errors += tx_under + loss;
dev->stats.collisions += multi_col + single_col + excess_col + late_col;
dev->stats.rx_over_errors += rx_over;
dev->stats.rx_crc_errors += crc;
dev->stats.rx_frame_errors += code;
dev->stats.tx_aborted_errors += tx_under;
dev->stats.tx_carrier_errors += loss;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* TLan_ReadAndClearStats */
/***************************************************************
* TLan_Reset
*
* Returns:
* 0
* Parms:
* dev Pointer to device structure of adapter
* to be reset.
*
* This function resets the adapter and it's physical
* device. See Chap. 3, pp. 9-10 of the "ThunderLAN
* Programmer's Guide" for details. The routine tries to
* implement what is detailed there, though adjustments
* have been made.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLan_ResetAdapter( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
int i;
u32 addr;
u32 data;
u8 data8;
priv->tlanFullDuplex = FALSE;
priv->phyOnline=0;
netif_carrier_off(dev);
/* 1. Assert reset bit. */
data = inl(dev->base_addr + TLAN_HOST_CMD);
data |= TLAN_HC_AD_RST;
outl(data, dev->base_addr + TLAN_HOST_CMD);
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
udelay(1000);
/* 2. Turn off interrupts. ( Probably isn't necessary ) */
data = inl(dev->base_addr + TLAN_HOST_CMD);
data |= TLAN_HC_INT_OFF;
outl(data, dev->base_addr + TLAN_HOST_CMD);
/* 3. Clear AREGs and HASHs. */
for ( i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4 ) {
TLan_DioWrite32( dev->base_addr, (u16) i, 0 );
}
/* 4. Setup NetConfig register. */
data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data );
/* 5. Load Ld_Tmr and Ld_Thr in HOST_CMD. */
outl( TLAN_HC_LD_TMR | 0x3f, dev->base_addr + TLAN_HOST_CMD );
outl( TLAN_HC_LD_THR | 0x9, dev->base_addr + TLAN_HOST_CMD );
/* 6. Unreset the MII by setting NMRST (in NetSio) to 1. */
outw( TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR );
addr = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
TLan_SetBit( TLAN_NET_SIO_NMRST, addr );
/* 7. Setup the remaining registers. */
if ( priv->tlanRev >= 0x30 ) {
data8 = TLAN_ID_TX_EOC | TLAN_ID_RX_EOC;
TLan_DioWrite8( dev->base_addr, TLAN_INT_DIS, data8 );
}
TLan_PhyDetect( dev );
data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( priv->adapter->flags & TLAN_ADAPTER_BIT_RATE_PHY ) {
data |= TLAN_NET_CFG_BIT;
if ( priv->aui == 1 ) {
TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x0a );
} else if ( priv->duplex == TLAN_DUPLEX_FULL ) {
TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x00 );
priv->tlanFullDuplex = TRUE;
} else {
TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x08 );
}
}
if ( priv->phyNum == 0 ) {
data |= TLAN_NET_CFG_PHY_EN;
}
TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data );
if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
TLan_FinishReset( dev );
} else {
TLan_PhyPowerDown( dev );
}
} /* TLan_ResetAdapter */
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLan_FinishReset( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
u8 data;
u32 phy;
u8 sio;
u16 status;
u16 partner;
u16 tlphy_ctl;
u16 tlphy_par;
u16 tlphy_id1, tlphy_id2;
int i;
phy = priv->phy[priv->phyNum];
data = TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP;
if ( priv->tlanFullDuplex ) {
data |= TLAN_NET_CMD_DUPLEX;
}
TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, data );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
data = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( priv->phyNum == 0 ) {
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
data |= TLAN_NET_MASK_MASK7;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
TLan_DioWrite8( dev->base_addr, TLAN_NET_MASK, data );
TLan_DioWrite16( dev->base_addr, TLAN_MAX_RX, ((1536)+7)&~7 );
TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &tlphy_id1 );
TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &tlphy_id2 );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
if ( ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) ||
( priv->aui ) ) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
status = MII_GS_LINK;
printk( "TLAN: %s: Link forced.\n", dev->name );
} else {
TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
udelay( 1000 );
TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
if ( (status & MII_GS_LINK) &&
/* We only support link info on Nat.Sem. PHY's */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
(tlphy_id1 == NAT_SEM_ID1) &&
(tlphy_id2 == NAT_SEM_ID2) ) {
TLan_MiiReadReg( dev, phy, MII_AN_LPA, &partner );
TLan_MiiReadReg( dev, phy, TLAN_TLPHY_PAR, &tlphy_par );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk( "TLAN: %s: Link active with ", dev->name );
if (!(tlphy_par & TLAN_PHY_AN_EN_STAT)) {
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
printk( "forced 10%sMbps %s-Duplex\n",
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
printk( "AutoNegotiation enabled, at 10%sMbps %s-Duplex\n",
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk("TLAN: Partner capability: ");
for (i = 5; i <= 10; i++)
if (partner & (1<<i))
printk("%s",media[i-5]);
printk("\n");
}
TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
#ifdef MONITOR
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* We have link beat..for now anyway */
priv->link = 1;
/*Enabling link beat monitoring */
TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_LINK_BEAT );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else if (status & MII_GS_LINK) {
printk( "TLAN: %s: Link active\n", dev->name );
TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
}
}
if ( priv->phyNum == 0 ) {
TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl );
tlphy_ctl |= TLAN_TC_INTEN;
TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl );
sio = TLan_DioRead8( dev->base_addr, TLAN_NET_SIO );
sio |= TLAN_NET_SIO_MINTEN;
TLan_DioWrite8( dev->base_addr, TLAN_NET_SIO, sio );
}
if ( status & MII_GS_LINK ) {
TLan_SetMac( dev, 0, dev->dev_addr );
priv->phyOnline = 1;
outb( ( TLAN_HC_INT_ON >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
if ( debug >= 1 && debug != TLAN_DEBUG_PROBE ) {
outb( ( TLAN_HC_REQ_INT >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
}
outl( priv->rxListDMA, dev->base_addr + TLAN_CH_PARM );
outl( TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD );
netif_carrier_on(dev);
} else {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
printk( "TLAN: %s: Link inactive, will retry in 10 secs...\n",
dev->name );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_FINISH_RESET );
return;
}
[PATCH] fix PROMISC/bridging in TLAN driver This has been a problem for me for ages. When using bridging, the driver is switched into promiscuous mode before the link init is complete. The init complete routine then resets the promisc bit on the card so the kernel still thinks the card is in promiscuous mode but the card isn't. doh. I think this bug only shows up in bridging when the bridge is started at boot time (or something else that sets promisc at the same time the card was started). If promisc is enabled later it works. Here's a trivial (and hopefully correct) patch that works for me. It just calls the promisc/multicast setup routine after init. Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-05-06 06:14:18 +08:00
TLan_SetMulticastList(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* TLan_FinishReset */
/***************************************************************
* TLan_SetMac
*
* Returns:
* Nothing
* Parms:
* dev Pointer to device structure of adapter
* on which to change the AREG.
* areg The AREG to set the address in (0 - 3).
* mac A pointer to an array of chars. Each
* element stores one byte of the address.
* IE, it isn't in ascii.
*
* This function transfers a MAC address to one of the
* TLAN AREGs (address registers). The TLAN chip locks
* the register on writing to offset 0 and unlocks the
* register after writing to offset 5. If NULL is passed
* in mac, then the AREG is filled with 0's.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_SetMac( struct net_device *dev, int areg, char *mac )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int i;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
areg *= 6;
if ( mac != NULL ) {
for ( i = 0; i < 6; i++ )
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLan_DioWrite8( dev->base_addr,
TLAN_AREG_0 + areg + i, mac[i] );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
for ( i = 0; i < 6; i++ )
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
TLan_DioWrite8( dev->base_addr,
TLAN_AREG_0 + areg + i, 0 );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
} /* TLan_SetMac */
/*****************************************************************************
******************************************************************************
ThunderLAN Driver PHY Layer Routines
******************************************************************************
*****************************************************************************/
/*********************************************************************
* TLan_PhyPrint
*
* Returns:
* Nothing
* Parms:
* dev A pointer to the device structure of the
* TLAN device having the PHYs to be detailed.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* This function prints the registers a PHY (aka transceiver).
*
********************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_PhyPrint( struct net_device *dev )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
TLanPrivateInfo *priv = netdev_priv(dev);
u16 i, data0, data1, data2, data3, phy;
phy = priv->phy[priv->phyNum];
if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
printk( "TLAN: Device %s, Unmanaged PHY.\n", dev->name );
} else if ( phy <= TLAN_PHY_MAX_ADDR ) {
printk( "TLAN: Device %s, PHY 0x%02x.\n", dev->name, phy );
printk( "TLAN: Off. +0 +1 +2 +3 \n" );
for ( i = 0; i < 0x20; i+= 4 ) {
printk( "TLAN: 0x%02x", i );
TLan_MiiReadReg( dev, phy, i, &data0 );
printk( " 0x%04hx", data0 );
TLan_MiiReadReg( dev, phy, i + 1, &data1 );
printk( " 0x%04hx", data1 );
TLan_MiiReadReg( dev, phy, i + 2, &data2 );
printk( " 0x%04hx", data2 );
TLan_MiiReadReg( dev, phy, i + 3, &data3 );
printk( " 0x%04hx\n", data3 );
}
} else {
printk( "TLAN: Device %s, Invalid PHY.\n", dev->name );
}
} /* TLan_PhyPrint */
/*********************************************************************
* TLan_PhyDetect
*
* Returns:
* Nothing
* Parms:
* dev A pointer to the device structure of the adapter
* for which the PHY needs determined.
*
* So far I've found that adapters which have external PHYs
* may also use the internal PHY for part of the functionality.
* (eg, AUI/Thinnet). This function finds out if this TLAN
* chip has an internal PHY, and then finds the first external
* PHY (starting from address 0) if it exists).
*
********************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_PhyDetect( struct net_device *dev )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
TLanPrivateInfo *priv = netdev_priv(dev);
u16 control;
u16 hi;
u16 lo;
u32 phy;
if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
priv->phyNum = 0xFFFF;
return;
}
TLan_MiiReadReg( dev, TLAN_PHY_MAX_ADDR, MII_GEN_ID_HI, &hi );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( hi != 0xFFFF ) {
priv->phy[0] = TLAN_PHY_MAX_ADDR;
} else {
priv->phy[0] = TLAN_PHY_NONE;
}
priv->phy[1] = TLAN_PHY_NONE;
for ( phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++ ) {
TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &control );
TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &hi );
TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &lo );
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
if ( ( control != 0xFFFF ) ||
( hi != 0xFFFF ) || ( lo != 0xFFFF ) ) {
TLAN_DBG( TLAN_DEBUG_GNRL,
"PHY found at %02x %04x %04x %04x\n",
phy, control, hi, lo );
if ( ( priv->phy[1] == TLAN_PHY_NONE ) &&
( phy != TLAN_PHY_MAX_ADDR ) ) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
priv->phy[1] = phy;
}
}
}
if ( priv->phy[1] != TLAN_PHY_NONE ) {
priv->phyNum = 1;
} else if ( priv->phy[0] != TLAN_PHY_NONE ) {
priv->phyNum = 0;
} else {
printk( "TLAN: Cannot initialize device, no PHY was found!\n" );
}
} /* TLan_PhyDetect */
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_PhyPowerDown( struct net_device *dev )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
TLanPrivateInfo *priv = netdev_priv(dev);
u16 value;
TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Powering down PHY(s).\n", dev->name );
value = MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE;
TLan_MiiSync( dev->base_addr );
TLan_MiiWriteReg( dev, priv->phy[priv->phyNum], MII_GEN_CTL, value );
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
if ( ( priv->phyNum == 0 ) &&
( priv->phy[1] != TLAN_PHY_NONE ) &&
( ! ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) ) ) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLan_MiiSync( dev->base_addr );
TLan_MiiWriteReg( dev, priv->phy[1], MII_GEN_CTL, value );
}
/* Wait for 50 ms and powerup
* This is abitrary. It is intended to make sure the
* transceiver settles.
*/
TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_PUP );
} /* TLan_PhyPowerDown */
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_PhyPowerUp( struct net_device *dev )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
TLanPrivateInfo *priv = netdev_priv(dev);
u16 value;
TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Powering up PHY.\n", dev->name );
TLan_MiiSync( dev->base_addr );
value = MII_GC_LOOPBK;
TLan_MiiWriteReg( dev, priv->phy[priv->phyNum], MII_GEN_CTL, value );
TLan_MiiSync(dev->base_addr);
/* Wait for 500 ms and reset the
* transceiver. The TLAN docs say both 50 ms and
* 500 ms, so do the longer, just in case.
*/
TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_RESET );
} /* TLan_PhyPowerUp */
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_PhyReset( struct net_device *dev )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
TLanPrivateInfo *priv = netdev_priv(dev);
u16 phy;
u16 value;
phy = priv->phy[priv->phyNum];
TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Reseting PHY.\n", dev->name );
TLan_MiiSync( dev->base_addr );
value = MII_GC_LOOPBK | MII_GC_RESET;
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, value );
TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &value );
while ( value & MII_GC_RESET ) {
TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &value );
}
/* Wait for 500 ms and initialize.
* I don't remember why I wait this long.
* I've changed this to 50ms, as it seems long enough.
*/
TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_START_LINK );
} /* TLan_PhyReset */
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_PhyStartLink( struct net_device *dev )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
TLanPrivateInfo *priv = netdev_priv(dev);
u16 ability;
u16 control;
u16 data;
u16 phy;
u16 status;
u16 tctl;
phy = priv->phy[priv->phyNum];
TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Trying to activate link.\n", dev->name );
TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
TLan_MiiReadReg( dev, phy, MII_GEN_STS, &ability );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
if ( ( status & MII_GS_AUTONEG ) &&
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
( ! priv->aui ) ) {
ability = status >> 11;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
if ( priv->speed == TLAN_SPEED_10 &&
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
priv->duplex == TLAN_DUPLEX_HALF) {
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0000);
} else if ( priv->speed == TLAN_SPEED_10 &&
priv->duplex == TLAN_DUPLEX_FULL) {
priv->tlanFullDuplex = TRUE;
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0100);
} else if ( priv->speed == TLAN_SPEED_100 &&
priv->duplex == TLAN_DUPLEX_HALF) {
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2000);
} else if ( priv->speed == TLAN_SPEED_100 &&
priv->duplex == TLAN_DUPLEX_FULL) {
priv->tlanFullDuplex = TRUE;
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2100);
} else {
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Set Auto-Neg advertisement */
TLan_MiiWriteReg( dev, phy, MII_AN_ADV, (ability << 5) | 1);
/* Enablee Auto-Neg */
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x1000 );
/* Restart Auto-Neg */
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x1200 );
/* Wait for 4 sec for autonegotiation
* to complete. The max spec time is less than this
* but the card need additional time to start AN.
* .5 sec should be plenty extra.
*/
printk( "TLAN: %s: Starting autonegotiation.\n", dev->name );
TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_PHY_FINISH_AN );
return;
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ( ( priv->aui ) && ( priv->phyNum != 0 ) ) {
priv->phyNum = 0;
data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, data );
TLan_SetTimer( dev, (40*HZ/1000), TLAN_TIMER_PHY_PDOWN );
return;
} else if ( priv->phyNum == 0 ) {
control = 0;
TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tctl );
if ( priv->aui ) {
tctl |= TLAN_TC_AUISEL;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
} else {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tctl &= ~TLAN_TC_AUISEL;
if ( priv->duplex == TLAN_DUPLEX_FULL ) {
control |= MII_GC_DUPLEX;
priv->tlanFullDuplex = TRUE;
}
if ( priv->speed == TLAN_SPEED_100 ) {
control |= MII_GC_SPEEDSEL;
}
}
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, control );
TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tctl );
}
/* Wait for 2 sec to give the transceiver time
* to establish link.
*/
TLan_SetTimer( dev, (4*HZ), TLAN_TIMER_FINISH_RESET );
} /* TLan_PhyStartLink */
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_PhyFinishAutoNeg( struct net_device *dev )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
TLanPrivateInfo *priv = netdev_priv(dev);
u16 an_adv;
u16 an_lpa;
u16 data;
u16 mode;
u16 phy;
u16 status;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
phy = priv->phy[priv->phyNum];
TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
udelay( 1000 );
TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
if ( ! ( status & MII_GS_AUTOCMPLT ) ) {
/* Wait for 8 sec to give the process
* more time. Perhaps we should fail after a while.
*/
if (!priv->neg_be_verbose++) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
pr_info("TLAN: Giving autonegotiation more time.\n");
pr_info("TLAN: Please check that your adapter has\n");
pr_info("TLAN: been properly connected to a HUB or Switch.\n");
pr_info("TLAN: Trying to establish link in the background...\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
TLan_SetTimer( dev, (8*HZ), TLAN_TIMER_PHY_FINISH_AN );
return;
}
printk( "TLAN: %s: Autonegotiation complete.\n", dev->name );
TLan_MiiReadReg( dev, phy, MII_AN_ADV, &an_adv );
TLan_MiiReadReg( dev, phy, MII_AN_LPA, &an_lpa );
mode = an_adv & an_lpa & 0x03E0;
if ( mode & 0x0100 ) {
priv->tlanFullDuplex = TRUE;
} else if ( ! ( mode & 0x0080 ) && ( mode & 0x0040 ) ) {
priv->tlanFullDuplex = TRUE;
}
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
if ( ( ! ( mode & 0x0180 ) ) &&
( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) &&
( priv->phyNum != 0 ) ) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
priv->phyNum = 0;
data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, data );
TLan_SetTimer( dev, (400*HZ/1000), TLAN_TIMER_PHY_PDOWN );
return;
}
if ( priv->phyNum == 0 ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
if ( ( priv->duplex == TLAN_DUPLEX_FULL ) ||
( an_adv & an_lpa & 0x0040 ) ) {
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL,
MII_GC_AUTOENB | MII_GC_DUPLEX );
pr_info("TLAN: Starting internal PHY with FULL-DUPLEX\n" );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, MII_GC_AUTOENB );
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
pr_info( "TLAN: Starting internal PHY with HALF-DUPLEX\n" );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
/* Wait for 100 ms. No reason in partiticular.
*/
TLan_SetTimer( dev, (HZ/10), TLAN_TIMER_FINISH_RESET );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* TLan_PhyFinishAutoNeg */
#ifdef MONITOR
/*********************************************************************
*
* TLan_phyMonitor
*
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* Returns:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* None
*
* Params:
* dev The device structure of this device.
*
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* This function monitors PHY condition by reading the status
* register via the MII bus. This can be used to give info
* about link changes (up/down), and possible switch to alternate
* media.
*
* ******************************************************************/
void TLan_PhyMonitor( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
u16 phy;
u16 phy_status;
phy = priv->phy[priv->phyNum];
/* Get PHY status register */
TLan_MiiReadReg( dev, phy, MII_GEN_STS, &phy_status );
/* Check if link has been lost */
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
if (!(phy_status & MII_GS_LINK)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (priv->link) {
priv->link = 0;
printk(KERN_DEBUG "TLAN: %s has lost link\n", dev->name);
[netdrvrs] Use netif_carrier_* instead of IFF_RUNNING
2005-05-13 07:45:25 +08:00
netif_carrier_off(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT );
return;
}
}
/* Link restablished? */
if ((phy_status & MII_GS_LINK) && !priv->link) {
priv->link = 1;
printk(KERN_DEBUG "TLAN: %s has reestablished link\n", dev->name);
[netdrvrs] Use netif_carrier_* instead of IFF_RUNNING
2005-05-13 07:45:25 +08:00
netif_carrier_on(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/* Setup a new monitor */
TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif /* MONITOR */
/*****************************************************************************
******************************************************************************
ThunderLAN Driver MII Routines
These routines are based on the information in Chap. 2 of the
"ThunderLAN Programmer's Guide", pp. 15-24.
******************************************************************************
*****************************************************************************/
/***************************************************************
* TLan_MiiReadReg
*
* Returns:
* 0 if ack received ok
* 1 otherwise.
*
* Parms:
* dev The device structure containing
* The io address and interrupt count
* for this device.
* phy The address of the PHY to be queried.
* reg The register whose contents are to be
s/retreiv/retriev/g As everyone knows, the rule is: "i before e.. um.. always." Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-03 20:27:11 +08:00
* retrieved.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* val A pointer to a variable to store the
* retrieved value.
*
s/retreiv/retriev/g As everyone knows, the rule is: "i before e.. um.. always." Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-03 20:27:11 +08:00
* This function uses the TLAN's MII bus to retrieve the contents
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* of a given register on a PHY. It sends the appropriate info
* and then reads the 16-bit register value from the MII bus via
* the TLAN SIO register.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
u8 nack;
u16 sio, tmp;
u32 i;
int err;
int minten;
TLanPrivateInfo *priv = netdev_priv(dev);
unsigned long flags = 0;
err = FALSE;
outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!in_irq())
spin_lock_irqsave(&priv->lock, flags);
TLan_MiiSync(dev->base_addr);
minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
if ( minten )
TLan_ClearBit(TLAN_NET_SIO_MINTEN, sio);
TLan_MiiSendData( dev->base_addr, 0x1, 2 ); /* Start ( 01b ) */
TLan_MiiSendData( dev->base_addr, 0x2, 2 ); /* Read ( 10b ) */
TLan_MiiSendData( dev->base_addr, phy, 5 ); /* Device # */
TLan_MiiSendData( dev->base_addr, reg, 5 ); /* Register # */
TLan_ClearBit(TLAN_NET_SIO_MTXEN, sio); /* Change direction */
TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Clock Idle bit */
TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Wait 300ns */
nack = TLan_GetBit(TLAN_NET_SIO_MDATA, sio); /* Check for ACK */
TLan_SetBit(TLAN_NET_SIO_MCLK, sio); /* Finish ACK */
if (nack) { /* No ACK, so fake it */
for (i = 0; i < 16; i++) {
TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
}
tmp = 0xffff;
err = TRUE;
} else { /* ACK, so read data */
for (tmp = 0, i = 0x8000; i; i >>= 1) {
TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
if (TLan_GetBit(TLAN_NET_SIO_MDATA, sio))
tmp |= i;
TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
}
}
TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Idle cycle */
TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
if ( minten )
TLan_SetBit(TLAN_NET_SIO_MINTEN, sio);
*val = tmp;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!in_irq())
spin_unlock_irqrestore(&priv->lock, flags);
return err;
} /* TLan_MiiReadReg */
/***************************************************************
* TLan_MiiSendData
*
* Returns:
* Nothing
* Parms:
* base_port The base IO port of the adapter in
* question.
* dev The address of the PHY to be queried.
* data The value to be placed on the MII bus.
* num_bits The number of bits in data that are to
* be placed on the MII bus.
*
* This function sends on sequence of bits on the MII
* configuration bus.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
u16 sio;
u32 i;
if ( num_bits == 0 )
return;
outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
TLan_SetBit( TLAN_NET_SIO_MTXEN, sio );
for ( i = ( 0x1 << ( num_bits - 1 ) ); i; i >>= 1 ) {
TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
(void) TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
if ( data & i )
TLan_SetBit( TLAN_NET_SIO_MDATA, sio );
else
TLan_ClearBit( TLAN_NET_SIO_MDATA, sio );
TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
(void) TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
}
} /* TLan_MiiSendData */
/***************************************************************
* TLan_MiiSync
*
* Returns:
* Nothing
* Parms:
* base_port The base IO port of the adapter in
* question.
*
* This functions syncs all PHYs in terms of the MII configuration
* bus.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_MiiSync( u16 base_port )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int i;
u16 sio;
outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
TLan_ClearBit( TLAN_NET_SIO_MTXEN, sio );
for ( i = 0; i < 32; i++ ) {
TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
}
} /* TLan_MiiSync */
/***************************************************************
* TLan_MiiWriteReg
*
* Returns:
* Nothing
* Parms:
* dev The device structure for the device
* to write to.
* phy The address of the PHY to be written to.
* reg The register whose contents are to be
* written.
* val The value to be written to the register.
*
* This function uses the TLAN's MII bus to write the contents of a
* given register on a PHY. It sends the appropriate info and then
* writes the 16-bit register value from the MII configuration bus
* via the TLAN SIO register.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
u16 sio;
int minten;
unsigned long flags = 0;
TLanPrivateInfo *priv = netdev_priv(dev);
outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!in_irq())
spin_lock_irqsave(&priv->lock, flags);
TLan_MiiSync( dev->base_addr );
minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
if ( minten )
TLan_ClearBit( TLAN_NET_SIO_MINTEN, sio );
TLan_MiiSendData( dev->base_addr, 0x1, 2 ); /* Start ( 01b ) */
TLan_MiiSendData( dev->base_addr, 0x1, 2 ); /* Write ( 01b ) */
TLan_MiiSendData( dev->base_addr, phy, 5 ); /* Device # */
TLan_MiiSendData( dev->base_addr, reg, 5 ); /* Register # */
TLan_MiiSendData( dev->base_addr, 0x2, 2 ); /* Send ACK */
TLan_MiiSendData( dev->base_addr, val, 16 ); /* Send Data */
TLan_ClearBit( TLAN_NET_SIO_MCLK, sio ); /* Idle cycle */
TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
if ( minten )
TLan_SetBit( TLAN_NET_SIO_MINTEN, sio );
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!in_irq())
spin_unlock_irqrestore(&priv->lock, flags);
} /* TLan_MiiWriteReg */
/*****************************************************************************
******************************************************************************
ThunderLAN Driver Eeprom routines
The Compaq Netelligent 10 and 10/100 cards use a Microchip 24C02A
EEPROM. These functions are based on information in Microchip's
data sheet. I don't know how well this functions will work with
other EEPROMs.
******************************************************************************
*****************************************************************************/
/***************************************************************
* TLan_EeSendStart
*
* Returns:
* Nothing
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* Parms:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* io_base The IO port base address for the
* TLAN device with the EEPROM to
* use.
*
* This function sends a start cycle to an EEPROM attached
* to a TLAN chip.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_EeSendStart( u16 io_base )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
u16 sio;
outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
} /* TLan_EeSendStart */
/***************************************************************
* TLan_EeSendByte
*
* Returns:
* If the correct ack was received, 0, otherwise 1
* Parms: io_base The IO port base address for the
* TLAN device with the EEPROM to
* use.
* data The 8 bits of information to
* send to the EEPROM.
* stop If TLAN_EEPROM_STOP is passed, a
* stop cycle is sent after the
* byte is sent after the ack is
* read.
*
* This function sends a byte on the serial EEPROM line,
* driving the clock to send each bit. The function then
* reverses transmission direction and reads an acknowledge
* bit.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static int TLan_EeSendByte( u16 io_base, u8 data, int stop )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int err;
u8 place;
u16 sio;
outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
/* Assume clock is low, tx is enabled; */
for ( place = 0x80; place != 0; place >>= 1 ) {
if ( place & data )
TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
else
TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
}
TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
err = TLan_GetBit( TLAN_NET_SIO_EDATA, sio );
TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
if ( ( ! err ) && stop ) {
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
/* STOP, raise data while clock is high */
TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
}
return ( err );
} /* TLan_EeSendByte */
/***************************************************************
* TLan_EeReceiveByte
*
* Returns:
* Nothing
* Parms:
* io_base The IO port base address for the
* TLAN device with the EEPROM to
* use.
* data An address to a char to hold the
* data sent from the EEPROM.
* stop If TLAN_EEPROM_STOP is passed, a
* stop cycle is sent after the
* byte is received, and no ack is
* sent.
*
* This function receives 8 bits of data from the EEPROM
* over the serial link. It then sends and ack bit, or no
* ack and a stop bit. This function is used to retrieve
* data after the address of a byte in the EEPROM has been
* sent.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
u8 place;
u16 sio;
outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
*data = 0;
/* Assume clock is low, tx is enabled; */
TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
for ( place = 0x80; place; place >>= 1 ) {
TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
if ( TLan_GetBit( TLAN_NET_SIO_EDATA, sio ) )
*data |= place;
TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
}
TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
if ( ! stop ) {
TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); /* Ack = 0 */
TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
} else {
TLan_SetBit( TLAN_NET_SIO_EDATA, sio ); /* No ack = 1 (?) */
TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
tlan: wrap source lines Make driver more readable on standard 80 col windows. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31 00:49:58 +08:00
/* STOP, raise data while clock is high */
TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
}
} /* TLan_EeReceiveByte */
/***************************************************************
* TLan_EeReadByte
*
* Returns:
* No error = 0, else, the stage at which the error
* occurred.
* Parms:
* io_base The IO port base address for the
* TLAN device with the EEPROM to
* use.
* ee_addr The address of the byte in the
* EEPROM whose contents are to be
* retrieved.
* data An address to a char to hold the
* data obtained from the EEPROM.
*
* This function reads a byte of information from an byte
* cell in the EEPROM.
*
**************************************************************/
tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19 02:04:38 +08:00
static int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int err;
TLanPrivateInfo *priv = netdev_priv(dev);
unsigned long flags = 0;
int ret=0;
spin_lock_irqsave(&priv->lock, flags);
TLan_EeSendStart( dev->base_addr );
err = TLan_EeSendByte( dev->base_addr, 0xA0, TLAN_EEPROM_ACK );
if (err)
{
ret=1;
goto fail;
}
err = TLan_EeSendByte( dev->base_addr, ee_addr, TLAN_EEPROM_ACK );
if (err)
{
ret=2;
goto fail;
}
TLan_EeSendStart( dev->base_addr );
err = TLan_EeSendByte( dev->base_addr, 0xA1, TLAN_EEPROM_ACK );
if (err)
{
ret=3;
goto fail;
}
TLan_EeReceiveByte( dev->base_addr, data, TLAN_EEPROM_STOP );
fail:
spin_unlock_irqrestore(&priv->lock, flags);
return ret;
} /* TLan_EeReadByte */