p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/arch/x86/include/asm/inst.h

241 lines
4.1 KiB
C
Raw Normal View History

x86: Generate .byte code for some new instructions via gas macro It will take some time for binutils (gas) to support some newly added instructions, such as SSE4.1 instructions or the AES-NI instructions found in upcoming Intel CPU. To make the source code can be compiled by old binutils, .byte code is used instead of the assembly instruction. But the readability and flexibility of raw .byte code is not good. This patch solves the issue of raw .byte code via generating it via assembly instruction like gas macro. The syntax is as close as possible to real assembly instruction. Some helper macros such as MODRM is not a full feature implementation. It can be extended when necessary. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-11-10 02:52:26 +08:00
/*
* Generate .byte code for some instructions not supported by old
* binutils.
*/
#ifndef X86_ASM_INST_H
#define X86_ASM_INST_H
#ifdef __ASSEMBLY__
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 16:28:42 +08:00
#define REG_NUM_INVALID 100
#define REG_TYPE_R64 0
#define REG_TYPE_XMM 1
#define REG_TYPE_INVALID 100
.macro R64_NUM opd r64
\opd = REG_NUM_INVALID
.ifc \r64,%rax
\opd = 0
.endif
.ifc \r64,%rcx
\opd = 1
.endif
.ifc \r64,%rdx
\opd = 2
.endif
.ifc \r64,%rbx
\opd = 3
.endif
.ifc \r64,%rsp
\opd = 4
.endif
.ifc \r64,%rbp
\opd = 5
.endif
.ifc \r64,%rsi
\opd = 6
.endif
.ifc \r64,%rdi
\opd = 7
.endif
.ifc \r64,%r8
\opd = 8
.endif
.ifc \r64,%r9
\opd = 9
.endif
.ifc \r64,%r10
\opd = 10
.endif
.ifc \r64,%r11
\opd = 11
.endif
.ifc \r64,%r12
\opd = 12
.endif
.ifc \r64,%r13
\opd = 13
.endif
.ifc \r64,%r14
\opd = 14
.endif
.ifc \r64,%r15
\opd = 15
.endif
.endm
x86: Generate .byte code for some new instructions via gas macro It will take some time for binutils (gas) to support some newly added instructions, such as SSE4.1 instructions or the AES-NI instructions found in upcoming Intel CPU. To make the source code can be compiled by old binutils, .byte code is used instead of the assembly instruction. But the readability and flexibility of raw .byte code is not good. This patch solves the issue of raw .byte code via generating it via assembly instruction like gas macro. The syntax is as close as possible to real assembly instruction. Some helper macros such as MODRM is not a full feature implementation. It can be extended when necessary. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-11-10 02:52:26 +08:00
.macro XMM_NUM opd xmm
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 16:28:42 +08:00
\opd = REG_NUM_INVALID
x86: Generate .byte code for some new instructions via gas macro It will take some time for binutils (gas) to support some newly added instructions, such as SSE4.1 instructions or the AES-NI instructions found in upcoming Intel CPU. To make the source code can be compiled by old binutils, .byte code is used instead of the assembly instruction. But the readability and flexibility of raw .byte code is not good. This patch solves the issue of raw .byte code via generating it via assembly instruction like gas macro. The syntax is as close as possible to real assembly instruction. Some helper macros such as MODRM is not a full feature implementation. It can be extended when necessary. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-11-10 02:52:26 +08:00
.ifc \xmm,%xmm0
\opd = 0
.endif
.ifc \xmm,%xmm1
\opd = 1
.endif
.ifc \xmm,%xmm2
\opd = 2
.endif
.ifc \xmm,%xmm3
\opd = 3
.endif
.ifc \xmm,%xmm4
\opd = 4
.endif
.ifc \xmm,%xmm5
\opd = 5
.endif
.ifc \xmm,%xmm6
\opd = 6
.endif
.ifc \xmm,%xmm7
\opd = 7
.endif
.ifc \xmm,%xmm8
\opd = 8
.endif
.ifc \xmm,%xmm9
\opd = 9
.endif
.ifc \xmm,%xmm10
\opd = 10
.endif
.ifc \xmm,%xmm11
\opd = 11
.endif
.ifc \xmm,%xmm12
\opd = 12
.endif
.ifc \xmm,%xmm13
\opd = 13
.endif
.ifc \xmm,%xmm14
\opd = 14
.endif
.ifc \xmm,%xmm15
\opd = 15
.endif
.endm
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 16:28:42 +08:00
.macro REG_TYPE type reg
R64_NUM reg_type_r64 \reg
XMM_NUM reg_type_xmm \reg
crypto: aesni-intel - Fix another CTR build failure with gas 2.16.1 The previous AES-NI CTR optimization compiling failure gas 2.16.1 fix introduces another compiling failure by itself. This patch fixes that. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-24 21:37:57 +08:00
.if reg_type_r64 <> REG_NUM_INVALID
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 16:28:42 +08:00
\type = REG_TYPE_R64
crypto: aesni-intel - Fix another CTR build failure with gas 2.16.1 The previous AES-NI CTR optimization compiling failure gas 2.16.1 fix introduces another compiling failure by itself. This patch fixes that. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-24 21:37:57 +08:00
.elseif reg_type_xmm <> REG_NUM_INVALID
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 16:28:42 +08:00
\type = REG_TYPE_XMM
.else
\type = REG_TYPE_INVALID
.endif
.endm
x86: Generate .byte code for some new instructions via gas macro It will take some time for binutils (gas) to support some newly added instructions, such as SSE4.1 instructions or the AES-NI instructions found in upcoming Intel CPU. To make the source code can be compiled by old binutils, .byte code is used instead of the assembly instruction. But the readability and flexibility of raw .byte code is not good. This patch solves the issue of raw .byte code via generating it via assembly instruction like gas macro. The syntax is as close as possible to real assembly instruction. Some helper macros such as MODRM is not a full feature implementation. It can be extended when necessary. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-11-10 02:52:26 +08:00
.macro PFX_OPD_SIZE
.byte 0x66
.endm
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 16:28:42 +08:00
.macro PFX_REX opd1 opd2 W=0
.if ((\opd1 | \opd2) & 8) || \W
.byte 0x40 | ((\opd1 & 8) >> 3) | ((\opd2 & 8) >> 1) | (\W << 3)
x86: Generate .byte code for some new instructions via gas macro It will take some time for binutils (gas) to support some newly added instructions, such as SSE4.1 instructions or the AES-NI instructions found in upcoming Intel CPU. To make the source code can be compiled by old binutils, .byte code is used instead of the assembly instruction. But the readability and flexibility of raw .byte code is not good. This patch solves the issue of raw .byte code via generating it via assembly instruction like gas macro. The syntax is as close as possible to real assembly instruction. Some helper macros such as MODRM is not a full feature implementation. It can be extended when necessary. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-11-10 02:52:26 +08:00
.endif
.endm
.macro MODRM mod opd1 opd2
.byte \mod | (\opd1 & 7) | ((\opd2 & 7) << 3)
.endm
.macro PSHUFB_XMM xmm1 xmm2
XMM_NUM pshufb_opd1 \xmm1
XMM_NUM pshufb_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX pshufb_opd1 pshufb_opd2
.byte 0x0f, 0x38, 0x00
MODRM 0xc0 pshufb_opd1 pshufb_opd2
.endm
.macro PCLMULQDQ imm8 xmm1 xmm2
XMM_NUM clmul_opd1 \xmm1
XMM_NUM clmul_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX clmul_opd1 clmul_opd2
.byte 0x0f, 0x3a, 0x44
MODRM 0xc0 clmul_opd1 clmul_opd2
.byte \imm8
.endm
.macro AESKEYGENASSIST rcon xmm1 xmm2
XMM_NUM aeskeygen_opd1 \xmm1
XMM_NUM aeskeygen_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX aeskeygen_opd1 aeskeygen_opd2
.byte 0x0f, 0x3a, 0xdf
MODRM 0xc0 aeskeygen_opd1 aeskeygen_opd2
.byte \rcon
.endm
.macro AESIMC xmm1 xmm2
XMM_NUM aesimc_opd1 \xmm1
XMM_NUM aesimc_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX aesimc_opd1 aesimc_opd2
.byte 0x0f, 0x38, 0xdb
MODRM 0xc0 aesimc_opd1 aesimc_opd2
.endm
.macro AESENC xmm1 xmm2
XMM_NUM aesenc_opd1 \xmm1
XMM_NUM aesenc_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX aesenc_opd1 aesenc_opd2
.byte 0x0f, 0x38, 0xdc
MODRM 0xc0 aesenc_opd1 aesenc_opd2
.endm
.macro AESENCLAST xmm1 xmm2
XMM_NUM aesenclast_opd1 \xmm1
XMM_NUM aesenclast_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX aesenclast_opd1 aesenclast_opd2
.byte 0x0f, 0x38, 0xdd
MODRM 0xc0 aesenclast_opd1 aesenclast_opd2
.endm
.macro AESDEC xmm1 xmm2
XMM_NUM aesdec_opd1 \xmm1
XMM_NUM aesdec_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX aesdec_opd1 aesdec_opd2
.byte 0x0f, 0x38, 0xde
MODRM 0xc0 aesdec_opd1 aesdec_opd2
.endm
.macro AESDECLAST xmm1 xmm2
XMM_NUM aesdeclast_opd1 \xmm1
XMM_NUM aesdeclast_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX aesdeclast_opd1 aesdeclast_opd2
.byte 0x0f, 0x38, 0xdf
MODRM 0xc0 aesdeclast_opd1 aesdeclast_opd2
.endm
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 16:28:42 +08:00
.macro MOVQ_R64_XMM opd1 opd2
REG_TYPE movq_r64_xmm_opd1_type \opd1
.if movq_r64_xmm_opd1_type == REG_TYPE_XMM
XMM_NUM movq_r64_xmm_opd1 \opd1
R64_NUM movq_r64_xmm_opd2 \opd2
.else
R64_NUM movq_r64_xmm_opd1 \opd1
XMM_NUM movq_r64_xmm_opd2 \opd2
.endif
PFX_OPD_SIZE
PFX_REX movq_r64_xmm_opd1 movq_r64_xmm_opd2 1
.if movq_r64_xmm_opd1_type == REG_TYPE_XMM
.byte 0x0f, 0x7e
.else
.byte 0x0f, 0x6e
.endif
MODRM 0xc0 movq_r64_xmm_opd1 movq_r64_xmm_opd2
.endm
x86: Generate .byte code for some new instructions via gas macro It will take some time for binutils (gas) to support some newly added instructions, such as SSE4.1 instructions or the AES-NI instructions found in upcoming Intel CPU. To make the source code can be compiled by old binutils, .byte code is used instead of the assembly instruction. But the readability and flexibility of raw .byte code is not good. This patch solves the issue of raw .byte code via generating it via assembly instruction like gas macro. The syntax is as close as possible to real assembly instruction. Some helper macros such as MODRM is not a full feature implementation. It can be extended when necessary. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-11-10 02:52:26 +08:00
#endif
#endif