linux_old1/drivers/net/phy/fixed.c

265 lines
5.6 KiB
C
Raw Normal View History

/*
* Fixed MDIO bus (MDIO bus emulation with fixed PHYs)
*
* Author: Vitaly Bordug <vbordug@ru.mvista.com>
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* Copyright (c) 2006-2007 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/list.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/err.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#define MII_REGS_NUM 29
struct fixed_mdio_bus {
int irqs[PHY_MAX_ADDR];
struct mii_bus *mii_bus;
struct list_head phys;
};
struct fixed_phy {
int id;
u16 regs[MII_REGS_NUM];
struct phy_device *phydev;
struct fixed_phy_status status;
int (*link_update)(struct net_device *, struct fixed_phy_status *);
struct list_head node;
};
static struct platform_device *pdev;
static struct fixed_mdio_bus platform_fmb = {
.phys = LIST_HEAD_INIT(platform_fmb.phys),
};
static int fixed_phy_update_regs(struct fixed_phy *fp)
{
u16 bmsr = BMSR_ANEGCAPABLE;
u16 bmcr = 0;
u16 lpagb = 0;
u16 lpa = 0;
if (fp->status.duplex) {
bmcr |= BMCR_FULLDPLX;
switch (fp->status.speed) {
case 1000:
bmsr |= BMSR_ESTATEN;
bmcr |= BMCR_SPEED1000;
lpagb |= LPA_1000FULL;
break;
case 100:
bmsr |= BMSR_100FULL;
bmcr |= BMCR_SPEED100;
lpa |= LPA_100FULL;
break;
case 10:
bmsr |= BMSR_10FULL;
lpa |= LPA_10FULL;
break;
default:
pr_warn("fixed phy: unknown speed\n");
return -EINVAL;
}
} else {
switch (fp->status.speed) {
case 1000:
bmsr |= BMSR_ESTATEN;
bmcr |= BMCR_SPEED1000;
lpagb |= LPA_1000HALF;
break;
case 100:
bmsr |= BMSR_100HALF;
bmcr |= BMCR_SPEED100;
lpa |= LPA_100HALF;
break;
case 10:
bmsr |= BMSR_10HALF;
lpa |= LPA_10HALF;
break;
default:
pr_warn("fixed phy: unknown speed\n");
return -EINVAL;
}
}
if (fp->status.link)
bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
if (fp->status.pause)
lpa |= LPA_PAUSE_CAP;
if (fp->status.asym_pause)
lpa |= LPA_PAUSE_ASYM;
fp->regs[MII_PHYSID1] = fp->id >> 16;
fp->regs[MII_PHYSID2] = fp->id;
fp->regs[MII_BMSR] = bmsr;
fp->regs[MII_BMCR] = bmcr;
fp->regs[MII_LPA] = lpa;
fp->regs[MII_STAT1000] = lpagb;
return 0;
}
static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num)
{
struct fixed_mdio_bus *fmb = bus->priv;
struct fixed_phy *fp;
if (reg_num >= MII_REGS_NUM)
return -1;
list_for_each_entry(fp, &fmb->phys, node) {
if (fp->id == phy_id) {
/* Issue callback if user registered it. */
if (fp->link_update) {
fp->link_update(fp->phydev->attached_dev,
&fp->status);
fixed_phy_update_regs(fp);
}
return fp->regs[reg_num];
}
}
return 0xFFFF;
}
static int fixed_mdio_write(struct mii_bus *bus, int phy_id, int reg_num,
u16 val)
{
return 0;
}
/*
* If something weird is required to be done with link/speed,
* network driver is able to assign a function to implement this.
* May be useful for PHY's that need to be software-driven.
*/
int fixed_phy_set_link_update(struct phy_device *phydev,
int (*link_update)(struct net_device *,
struct fixed_phy_status *))
{
struct fixed_mdio_bus *fmb = &platform_fmb;
struct fixed_phy *fp;
if (!link_update || !phydev || !phydev->bus)
return -EINVAL;
list_for_each_entry(fp, &fmb->phys, node) {
if (fp->id == phydev->phy_id) {
fp->link_update = link_update;
fp->phydev = phydev;
return 0;
}
}
return -ENOENT;
}
EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
int fixed_phy_add(unsigned int irq, int phy_id,
struct fixed_phy_status *status)
{
int ret;
struct fixed_mdio_bus *fmb = &platform_fmb;
struct fixed_phy *fp;
fp = kzalloc(sizeof(*fp), GFP_KERNEL);
if (!fp)
return -ENOMEM;
memset(fp->regs, 0xFF, sizeof(fp->regs[0]) * MII_REGS_NUM);
fmb->irqs[phy_id] = irq;
fp->id = phy_id;
fp->status = *status;
ret = fixed_phy_update_regs(fp);
if (ret)
goto err_regs;
list_add_tail(&fp->node, &fmb->phys);
return 0;
err_regs:
kfree(fp);
return ret;
}
EXPORT_SYMBOL_GPL(fixed_phy_add);
static int __init fixed_mdio_bus_init(void)
{
struct fixed_mdio_bus *fmb = &platform_fmb;
int ret;
pdev = platform_device_register_simple("Fixed MDIO bus", 0, NULL, 0);
if (IS_ERR(pdev)) {
ret = PTR_ERR(pdev);
goto err_pdev;
}
fmb->mii_bus = mdiobus_alloc();
if (fmb->mii_bus == NULL) {
ret = -ENOMEM;
goto err_mdiobus_reg;
}
snprintf(fmb->mii_bus->id, MII_BUS_ID_SIZE, "fixed-0");
fmb->mii_bus->name = "Fixed MDIO Bus";
fmb->mii_bus->priv = fmb;
fmb->mii_bus->parent = &pdev->dev;
fmb->mii_bus->read = &fixed_mdio_read;
fmb->mii_bus->write = &fixed_mdio_write;
fmb->mii_bus->irq = fmb->irqs;
ret = mdiobus_register(fmb->mii_bus);
if (ret)
goto err_mdiobus_alloc;
return 0;
err_mdiobus_alloc:
mdiobus_free(fmb->mii_bus);
err_mdiobus_reg:
platform_device_unregister(pdev);
err_pdev:
return ret;
}
module_init(fixed_mdio_bus_init);
static void __exit fixed_mdio_bus_exit(void)
{
struct fixed_mdio_bus *fmb = &platform_fmb;
struct fixed_phy *fp, *tmp;
mdiobus_unregister(fmb->mii_bus);
mdiobus_free(fmb->mii_bus);
platform_device_unregister(pdev);
list_for_each_entry_safe(fp, tmp, &fmb->phys, node) {
list_del(&fp->node);
kfree(fp);
}
}
module_exit(fixed_mdio_bus_exit);
MODULE_DESCRIPTION("Fixed MDIO bus (MDIO bus emulation with fixed PHYs)");
MODULE_AUTHOR("Vitaly Bordug");
MODULE_LICENSE("GPL");