p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/drivers/cpufreq/kirkwood-cpufreq.c

208 lines
5.0 KiB
C
Raw Normal View History

cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
/*
* kirkwood_freq.c: cpufreq driver for the Marvell kirkwood
*
* Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
cpufreq: kirkwood-cpufreq: remove device tree parsing for cpu nodes Now that the cpu device registration initialises the of_node(if available) appropriately for all the cpus, parsing here is redundant. This patch removes all DT parsing and uses cpu->of_node instead. Cc: Jason Cooper <jason@lakedaemon.net> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
2013-06-17 22:09:51 +08:00
#include <linux/of_device.h>
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/proc-fns.h>
#define CPU_SW_INT_BLK BIT(28)
static struct priv
{
struct clk *cpu_clk;
struct clk *ddr_clk;
struct clk *powersave_clk;
struct device *dev;
void __iomem *base;
} priv;
#define STATE_CPU_FREQ 0x01
#define STATE_DDR_FREQ 0x02
/*
* Kirkwood can swap the clock to the CPU between two clocks:
*
* - cpu clk
* - ddr clk
*
cpufreq: kirkwood: use the powersave multiplexer The powersave clock acts like a multiplexer for the cpu, selecting either the clock signal derived from the cpu pll or from the ddr clock. This patch changes powersave from a gate clock to a mux clock to better reflect this behavior. This is a cleaner approach whereby the frequency of the cpu always matches the rate of powersave_clk. The cpufreq driver for the kirkwood platform no longer must parse this behavior out of various calls to clk_enable and clk_disable, but can instead simply select the parent cpu it wants when changing rate. Likewise when requesting the cpu rate we need only query powersave_clk's rate through the usual call to clk_get_rate. The new clock data and corresponding changes to the cpufreq driver are combined into this single commit to avoid a git bisect issue where this cpufreq driver fails to work properly between the commit that updates the kirkwood clock driver and the commit that changes how the cpufreq driver uses that clock. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-08-18 23:30:29 +08:00
* The frequencies are set at runtime before registering this table.
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
*/
static struct cpufreq_frequency_table kirkwood_freq_table[] = {
cpufreq: create another field .flags in cpufreq_frequency_table Currently cpufreq frequency table has two fields: frequency and driver_data. driver_data is only for drivers' internal use and cpufreq core shouldn't use it at all. But with the introduction of BOOST frequencies, this assumption was broken and we started using it as a flag instead. There are two problems due to this: - It is against the description of this field, as driver's data is used by the core now. - if drivers fill it with -3 for any frequency, then those frequencies are never considered by cpufreq core as it is exactly same as value of CPUFREQ_BOOST_FREQ, i.e. ~2. The best way to get this fixed is by creating another field flags which will be used for such flags. This patch does that. Along with that various drivers need modifications due to the change of struct cpufreq_frequency_table. Reviewed-by: Gautham R Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-28 21:41:47 +08:00
{0, STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */
{0, STATE_DDR_FREQ, 0}, /* CPU uses ddrclk */
{0, 0, CPUFREQ_TABLE_END},
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
};
static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu)
{
cpufreq: kirkwood: use the powersave multiplexer The powersave clock acts like a multiplexer for the cpu, selecting either the clock signal derived from the cpu pll or from the ddr clock. This patch changes powersave from a gate clock to a mux clock to better reflect this behavior. This is a cleaner approach whereby the frequency of the cpu always matches the rate of powersave_clk. The cpufreq driver for the kirkwood platform no longer must parse this behavior out of various calls to clk_enable and clk_disable, but can instead simply select the parent cpu it wants when changing rate. Likewise when requesting the cpu rate we need only query powersave_clk's rate through the usual call to clk_get_rate. The new clock data and corresponding changes to the cpufreq driver are combined into this single commit to avoid a git bisect issue where this cpufreq driver fails to work properly between the commit that updates the kirkwood clock driver and the commit that changes how the cpufreq driver uses that clock. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-08-18 23:30:29 +08:00
return clk_get_rate(priv.powersave_clk) / 1000;
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
}
cpufreq: Implement light weight ->target_index() routine Currently, the prototype of cpufreq_drivers target routines is: int target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation); And most of the drivers call cpufreq_frequency_table_target() to get a valid index of their frequency table which is closest to the target_freq. And they don't use target_freq and relation after that. So, it makes sense to just do this work in cpufreq core before calling cpufreq_frequency_table_target() and simply pass index instead. But this can be done only with drivers which expose their frequency table with cpufreq core. For others we need to stick with the old prototype of target() until those drivers are converted to expose frequency tables. This patch implements the new light weight prototype for target_index() routine. It looks like this: int target_index(struct cpufreq_policy *policy, unsigned int index); CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and pass index to it. Because CPUFreq core now requires to call routines present in freq_table.c CONFIG_CPU_FREQ_TABLE must be enabled all the time. This also marks target() interface as deprecated. So, that new drivers avoid using it. And Documentation is updated accordingly. It also converts existing .target() to newly defined light weight .target_index() routine for many driver. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
2013-10-25 22:15:48 +08:00
static int kirkwood_cpufreq_target(struct cpufreq_policy *policy,
unsigned int index)
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
{
cpufreq: rename index as driver_data in cpufreq_frequency_table The "index" field of struct cpufreq_frequency_table was never an index and isn't used at all by the cpufreq core. It only is useful for cpufreq drivers for their internal purposes. Many people nowadays blindly set it in ascending order with the assumption that the core will use it, which is a mistake. Rename it to "driver_data" as that's what its purpose is. All of its users are updated accordingly. [rjw: Changelog] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-30 18:55:15 +08:00
unsigned int state = kirkwood_freq_table[index].driver_data;
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
unsigned long reg;
cpufreq: move freq change notifications to cpufreq core Most of the drivers do following in their ->target_index() routines: struct cpufreq_freqs freqs; freqs.old = old freq... freqs.new = new freq... cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); /* Change rate here */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); This is replicated over all cpufreq drivers today and there doesn't exists a good enough reason why this shouldn't be moved to cpufreq core instead. There are few special cases though, like exynos5440, which doesn't do everything on the call to ->target_index() routine and call some kind of bottom halves for doing this work, work/tasklet/etc.. They may continue doing notification from their own code as flag: CPUFREQ_ASYNC_NOTIFICATION is already set for them. All drivers are also modified in this patch to avoid breaking 'git bisect', as double notification would happen otherwise. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-14 22:08:24 +08:00
local_irq_disable();
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
cpufreq: move freq change notifications to cpufreq core Most of the drivers do following in their ->target_index() routines: struct cpufreq_freqs freqs; freqs.old = old freq... freqs.new = new freq... cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); /* Change rate here */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); This is replicated over all cpufreq drivers today and there doesn't exists a good enough reason why this shouldn't be moved to cpufreq core instead. There are few special cases though, like exynos5440, which doesn't do everything on the call to ->target_index() routine and call some kind of bottom halves for doing this work, work/tasklet/etc.. They may continue doing notification from their own code as flag: CPUFREQ_ASYNC_NOTIFICATION is already set for them. All drivers are also modified in this patch to avoid breaking 'git bisect', as double notification would happen otherwise. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-14 22:08:24 +08:00
/* Disable interrupts to the CPU */
reg = readl_relaxed(priv.base);
reg |= CPU_SW_INT_BLK;
writel_relaxed(reg, priv.base);
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
cpufreq: move freq change notifications to cpufreq core Most of the drivers do following in their ->target_index() routines: struct cpufreq_freqs freqs; freqs.old = old freq... freqs.new = new freq... cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); /* Change rate here */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); This is replicated over all cpufreq drivers today and there doesn't exists a good enough reason why this shouldn't be moved to cpufreq core instead. There are few special cases though, like exynos5440, which doesn't do everything on the call to ->target_index() routine and call some kind of bottom halves for doing this work, work/tasklet/etc.. They may continue doing notification from their own code as flag: CPUFREQ_ASYNC_NOTIFICATION is already set for them. All drivers are also modified in this patch to avoid breaking 'git bisect', as double notification would happen otherwise. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-14 22:08:24 +08:00
switch (state) {
case STATE_CPU_FREQ:
cpufreq: kirkwood: use the powersave multiplexer The powersave clock acts like a multiplexer for the cpu, selecting either the clock signal derived from the cpu pll or from the ddr clock. This patch changes powersave from a gate clock to a mux clock to better reflect this behavior. This is a cleaner approach whereby the frequency of the cpu always matches the rate of powersave_clk. The cpufreq driver for the kirkwood platform no longer must parse this behavior out of various calls to clk_enable and clk_disable, but can instead simply select the parent cpu it wants when changing rate. Likewise when requesting the cpu rate we need only query powersave_clk's rate through the usual call to clk_get_rate. The new clock data and corresponding changes to the cpufreq driver are combined into this single commit to avoid a git bisect issue where this cpufreq driver fails to work properly between the commit that updates the kirkwood clock driver and the commit that changes how the cpufreq driver uses that clock. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-08-18 23:30:29 +08:00
clk_set_parent(priv.powersave_clk, priv.cpu_clk);
cpufreq: move freq change notifications to cpufreq core Most of the drivers do following in their ->target_index() routines: struct cpufreq_freqs freqs; freqs.old = old freq... freqs.new = new freq... cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); /* Change rate here */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); This is replicated over all cpufreq drivers today and there doesn't exists a good enough reason why this shouldn't be moved to cpufreq core instead. There are few special cases though, like exynos5440, which doesn't do everything on the call to ->target_index() routine and call some kind of bottom halves for doing this work, work/tasklet/etc.. They may continue doing notification from their own code as flag: CPUFREQ_ASYNC_NOTIFICATION is already set for them. All drivers are also modified in this patch to avoid breaking 'git bisect', as double notification would happen otherwise. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-14 22:08:24 +08:00
break;
case STATE_DDR_FREQ:
cpufreq: kirkwood: use the powersave multiplexer The powersave clock acts like a multiplexer for the cpu, selecting either the clock signal derived from the cpu pll or from the ddr clock. This patch changes powersave from a gate clock to a mux clock to better reflect this behavior. This is a cleaner approach whereby the frequency of the cpu always matches the rate of powersave_clk. The cpufreq driver for the kirkwood platform no longer must parse this behavior out of various calls to clk_enable and clk_disable, but can instead simply select the parent cpu it wants when changing rate. Likewise when requesting the cpu rate we need only query powersave_clk's rate through the usual call to clk_get_rate. The new clock data and corresponding changes to the cpufreq driver are combined into this single commit to avoid a git bisect issue where this cpufreq driver fails to work properly between the commit that updates the kirkwood clock driver and the commit that changes how the cpufreq driver uses that clock. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-08-18 23:30:29 +08:00
clk_set_parent(priv.powersave_clk, priv.ddr_clk);
cpufreq: move freq change notifications to cpufreq core Most of the drivers do following in their ->target_index() routines: struct cpufreq_freqs freqs; freqs.old = old freq... freqs.new = new freq... cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); /* Change rate here */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); This is replicated over all cpufreq drivers today and there doesn't exists a good enough reason why this shouldn't be moved to cpufreq core instead. There are few special cases though, like exynos5440, which doesn't do everything on the call to ->target_index() routine and call some kind of bottom halves for doing this work, work/tasklet/etc.. They may continue doing notification from their own code as flag: CPUFREQ_ASYNC_NOTIFICATION is already set for them. All drivers are also modified in this patch to avoid breaking 'git bisect', as double notification would happen otherwise. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-14 22:08:24 +08:00
break;
}
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
cpufreq: move freq change notifications to cpufreq core Most of the drivers do following in their ->target_index() routines: struct cpufreq_freqs freqs; freqs.old = old freq... freqs.new = new freq... cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); /* Change rate here */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); This is replicated over all cpufreq drivers today and there doesn't exists a good enough reason why this shouldn't be moved to cpufreq core instead. There are few special cases though, like exynos5440, which doesn't do everything on the call to ->target_index() routine and call some kind of bottom halves for doing this work, work/tasklet/etc.. They may continue doing notification from their own code as flag: CPUFREQ_ASYNC_NOTIFICATION is already set for them. All drivers are also modified in this patch to avoid breaking 'git bisect', as double notification would happen otherwise. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-14 22:08:24 +08:00
/* Wait-for-Interrupt, while the hardware changes frequency */
cpu_do_idle();
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
cpufreq: move freq change notifications to cpufreq core Most of the drivers do following in their ->target_index() routines: struct cpufreq_freqs freqs; freqs.old = old freq... freqs.new = new freq... cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); /* Change rate here */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); This is replicated over all cpufreq drivers today and there doesn't exists a good enough reason why this shouldn't be moved to cpufreq core instead. There are few special cases though, like exynos5440, which doesn't do everything on the call to ->target_index() routine and call some kind of bottom halves for doing this work, work/tasklet/etc.. They may continue doing notification from their own code as flag: CPUFREQ_ASYNC_NOTIFICATION is already set for them. All drivers are also modified in this patch to avoid breaking 'git bisect', as double notification would happen otherwise. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-14 22:08:24 +08:00
/* Enable interrupts to the CPU */
reg = readl_relaxed(priv.base);
reg &= ~CPU_SW_INT_BLK;
writel_relaxed(reg, priv.base);
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
cpufreq: move freq change notifications to cpufreq core Most of the drivers do following in their ->target_index() routines: struct cpufreq_freqs freqs; freqs.old = old freq... freqs.new = new freq... cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); /* Change rate here */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); This is replicated over all cpufreq drivers today and there doesn't exists a good enough reason why this shouldn't be moved to cpufreq core instead. There are few special cases though, like exynos5440, which doesn't do everything on the call to ->target_index() routine and call some kind of bottom halves for doing this work, work/tasklet/etc.. They may continue doing notification from their own code as flag: CPUFREQ_ASYNC_NOTIFICATION is already set for them. All drivers are also modified in this patch to avoid breaking 'git bisect', as double notification would happen otherwise. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-14 22:08:24 +08:00
local_irq_enable();
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
return 0;
}
/* Module init and exit code */
static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
cpufreq: kirkwood: use cpufreq_generic_init() Use generic cpufreq_generic_init() routine instead of replicating the same code here. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-03 22:59:15 +08:00
return cpufreq_generic_init(policy, kirkwood_freq_table, 5000);
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
}
static struct cpufreq_driver kirkwood_cpufreq_driver = {
cpufreq: Mark ARM drivers with CPUFREQ_NEED_INITIAL_FREQ_CHECK flag Sometimes boot loaders set CPU frequency to a value outside of frequency table present with cpufreq core. In such cases CPU might be unstable if it has to run on that frequency for long duration of time and so its better to set it to a frequency which is specified in frequency table. On some systems we can't really say what frequency we're running at the moment and so for these we shouldn't check if we are running at a frequency present in frequency table. And so we really can't force this for all the cpufreq drivers. Hence we are created another flag here: CPUFREQ_NEED_INITIAL_FREQ_CHECK that will be marked by platforms which want to go for this check at boot time. Initially this is done for all ARM platforms but others may follow if required. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-03 13:50:45 +08:00
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
.get = kirkwood_cpufreq_get_cpu_frequency,
cpufreq: kirkwood: Use generic cpufreq routines Most of the CPUFreq drivers do similar things in .exit() and .verify() routines and .attr. So its better if we have generic routines for them which can be used by cpufreq drivers then. This patch uses these generic routines in the kirkwood driver. Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-03 22:58:09 +08:00
.verify = cpufreq_generic_frequency_table_verify,
cpufreq: Implement light weight ->target_index() routine Currently, the prototype of cpufreq_drivers target routines is: int target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation); And most of the drivers call cpufreq_frequency_table_target() to get a valid index of their frequency table which is closest to the target_freq. And they don't use target_freq and relation after that. So, it makes sense to just do this work in cpufreq core before calling cpufreq_frequency_table_target() and simply pass index instead. But this can be done only with drivers which expose their frequency table with cpufreq core. For others we need to stick with the old prototype of target() until those drivers are converted to expose frequency tables. This patch implements the new light weight prototype for target_index() routine. It looks like this: int target_index(struct cpufreq_policy *policy, unsigned int index); CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and pass index to it. Because CPUFreq core now requires to call routines present in freq_table.c CONFIG_CPU_FREQ_TABLE must be enabled all the time. This also marks target() interface as deprecated. So, that new drivers avoid using it. And Documentation is updated accordingly. It also converts existing .target() to newly defined light weight .target_index() routine for many driver. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
2013-10-25 22:15:48 +08:00
.target_index = kirkwood_cpufreq_target,
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
.init = kirkwood_cpufreq_cpu_init,
.name = "kirkwood-cpufreq",
cpufreq: kirkwood: Use generic cpufreq routines Most of the CPUFreq drivers do similar things in .exit() and .verify() routines and .attr. So its better if we have generic routines for them which can be used by cpufreq drivers then. This patch uses these generic routines in the kirkwood driver. Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-03 22:58:09 +08:00
.attr = cpufreq_generic_attr,
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
};
static int kirkwood_cpufreq_probe(struct platform_device *pdev)
{
struct device_node *np;
struct resource *res;
int err;
priv.dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
cpufreq: kirkwood: fix coccicheck warnings Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-22 08:10:22 +08:00
priv.base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(priv.base))
return PTR_ERR(priv.base);
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
cpufreq: kirkwood-cpufreq: remove device tree parsing for cpu nodes Now that the cpu device registration initialises the of_node(if available) appropriately for all the cpus, parsing here is redundant. This patch removes all DT parsing and uses cpu->of_node instead. Cc: Jason Cooper <jason@lakedaemon.net> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
2013-06-17 22:09:51 +08:00
np = of_cpu_device_node_get(0);
if (!np) {
dev_err(&pdev->dev, "failed to get cpu device node\n");
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
return -ENODEV;
cpufreq: kirkwood-cpufreq: remove device tree parsing for cpu nodes Now that the cpu device registration initialises the of_node(if available) appropriately for all the cpus, parsing here is redundant. This patch removes all DT parsing and uses cpu->of_node instead. Cc: Jason Cooper <jason@lakedaemon.net> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
2013-06-17 22:09:51 +08:00
}
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
priv.cpu_clk = of_clk_get_by_name(np, "cpu_clk");
if (IS_ERR(priv.cpu_clk)) {
cpufreq: kirkwood: add missing \n to end of dev_err messages Trival fix, dev_err messages are missing a \n, so add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-26 05:35:43 +08:00
dev_err(priv.dev, "Unable to get cpuclk\n");
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
return PTR_ERR(priv.cpu_clk);
}
cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable() clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-17 14:50:35 +08:00
err = clk_prepare_enable(priv.cpu_clk);
if (err) {
dev_err(priv.dev, "Unable to prepare cpuclk\n");
return err;
}
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000;
priv.ddr_clk = of_clk_get_by_name(np, "ddrclk");
if (IS_ERR(priv.ddr_clk)) {
cpufreq: kirkwood: add missing \n to end of dev_err messages Trival fix, dev_err messages are missing a \n, so add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-26 05:35:43 +08:00
dev_err(priv.dev, "Unable to get ddrclk\n");
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
err = PTR_ERR(priv.ddr_clk);
goto out_cpu;
}
cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable() clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-17 14:50:35 +08:00
err = clk_prepare_enable(priv.ddr_clk);
if (err) {
dev_err(priv.dev, "Unable to prepare ddrclk\n");
goto out_cpu;
}
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000;
priv.powersave_clk = of_clk_get_by_name(np, "powersave");
if (IS_ERR(priv.powersave_clk)) {
cpufreq: kirkwood: add missing \n to end of dev_err messages Trival fix, dev_err messages are missing a \n, so add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-26 05:35:43 +08:00
dev_err(priv.dev, "Unable to get powersave\n");
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
err = PTR_ERR(priv.powersave_clk);
goto out_ddr;
}
cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable() clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-17 14:50:35 +08:00
err = clk_prepare_enable(priv.powersave_clk);
if (err) {
dev_err(priv.dev, "Unable to prepare powersave clk\n");
goto out_ddr;
}
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
of_node_put(np);
np = NULL;
err = cpufreq_register_driver(&kirkwood_cpufreq_driver);
if (!err)
return 0;
cpufreq: kirkwood: add missing \n to end of dev_err messages Trival fix, dev_err messages are missing a \n, so add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-26 05:35:43 +08:00
dev_err(priv.dev, "Failed to register cpufreq driver\n");
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:52:51 +08:00
clk_disable_unprepare(priv.powersave_clk);
out_ddr:
clk_disable_unprepare(priv.ddr_clk);
out_cpu:
clk_disable_unprepare(priv.cpu_clk);
of_node_put(np);
return err;
}
static int kirkwood_cpufreq_remove(struct platform_device *pdev)
{
cpufreq_unregister_driver(&kirkwood_cpufreq_driver);
clk_disable_unprepare(priv.powersave_clk);
clk_disable_unprepare(priv.ddr_clk);
clk_disable_unprepare(priv.cpu_clk);
return 0;
}
static struct platform_driver kirkwood_cpufreq_platform_driver = {
.probe = kirkwood_cpufreq_probe,
.remove = kirkwood_cpufreq_remove,
.driver = {
.name = "kirkwood-cpufreq",
},
};
module_platform_driver(kirkwood_cpufreq_platform_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch");
MODULE_DESCRIPTION("cpufreq driver for Marvell's kirkwood CPU");
MODULE_ALIAS("platform:kirkwood-cpufreq");