p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/fs/xfs/xfs_icache.h

53 lines
1.8 KiB
C
Raw Normal View History

[XFS] move xfssyncd code to xfs_sync.c Move all the xfssyncd code to the new xfs_sync.c file. This places it closer to the actual code that it interacts with, rather than just being associated with high level VFS code. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32283a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:06:18 +08:00
/*
* Copyright (c) 2000-2006 Silicon Graphics, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
[XFS] move sync code to its own file The sync code in XFS is spread around several files. While it used to make sense to have such a distribution, the code is about to be cleaned up and so centralising it in one spot as the first step makes sense. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32282a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:06:08 +08:00
#ifndef XFS_SYNC_H
#define XFS_SYNC_H 1
[XFS] move xfssyncd code to xfs_sync.c Move all the xfssyncd code to the new xfs_sync.c file. This places it closer to the actual code that it interacts with, rather than just being associated with high level VFS code. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32283a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:06:18 +08:00
struct xfs_mount;
xfs: get rid of indirections in the quotaops implementation Currently we call from the nicely abstracted linux quotaops into a ugly multiplexer just to split the calls out at the same boundary again. Rewrite the quota ops handling to remove that obfucation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-02-09 15:47:34 +08:00
struct xfs_perag;
[XFS] move xfssyncd code to xfs_sync.c Move all the xfssyncd code to the new xfs_sync.c file. This places it closer to the actual code that it interacts with, rather than just being associated with high level VFS code. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32283a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:06:18 +08:00
xfs: remove SYNC_BDFLUSH SYNC_BDFLUSH is a leftover from IRIX and rather misnamed for todays code. Make xfs_sync_fsdata and xfs_dq_sync use the SYNC_TRYLOCK flag for not blocking on logs just as the inode sync code already does. For xfs_sync_fsdata it's a trivial 1:1 replacement, but for xfs_qm_sync I use the opportunity to decouple the non-blocking lock case from the different flushing modes, similar to the inode sync code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:37:16 +08:00
#define SYNC_WAIT 0x0001 /* wait for i/o to complete */
#define SYNC_TRYLOCK 0x0002 /* only try to lock inodes */
[XFS] move xfssyncd code to xfs_sync.c Move all the xfssyncd code to the new xfs_sync.c file. This places it closer to the actual code that it interacts with, rather than just being associated with high level VFS code. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32283a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:06:18 +08:00
xfs: remove xfs_iget.c The inode cache functions remaining in xfs_iget.c can be moved to xfs_icache.c along with the other inode cache functions. This removes all functionality from xfs_iget.c, so the file can simply be removed. This move results in various functions now only having the scope of a single file (e.g. xfs_inode_free()), so clean up all the definitions and exported prototypes in xfs_icache.[ch] and xfs_inode.h appropriately. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-08 18:56:11 +08:00
int xfs_iget(struct xfs_mount *mp, struct xfs_trans *tp, xfs_ino_t ino,
uint flags, uint lock_flags, xfs_inode_t **ipp);
xfs: xfs_syncd_stop must die xfs_syncd_start and xfs_syncd_stop tie a bunch of unrelated functionailty together that actually have different start and stop requirements. Kill these functions and open code the start/stop methods for each of the background functions. Subsequent patches will move the start/stop functions around to the correct places to avoid races and shutdown issues. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-08 18:55:59 +08:00
void xfs_reclaim_worker(struct work_struct *work);
[XFS] move xfssyncd code to xfs_sync.c Move all the xfssyncd code to the new xfs_sync.c file. This places it closer to the actual code that it interacts with, rather than just being associated with high level VFS code. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32283a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:06:18 +08:00
xfs: remove unused parameter from xfs_reclaim_inodes The noblock parameter of xfs_reclaim_inodes is only ever set to zero. Remove it and all the conditional code that is never executed. Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:35:12 +08:00
int xfs_reclaim_inodes(struct xfs_mount *mp, int mode);
xfs: make use of new shrinker callout for the inode cache Convert the inode reclaim shrinker to use the new per-sb shrinker operations. This allows much bigger reclaim batches to be used, and allows the XFS inode cache to be shrunk in proportion with the VFS dentry and inode caches. This avoids the problem of the VFS caches being shrunk significantly before the XFS inode cache is shrunk resulting in imbalances in the caches during reclaim. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-08 12:14:46 +08:00
int xfs_reclaim_inodes_count(struct xfs_mount *mp);
void xfs_reclaim_inodes_nr(struct xfs_mount *mp, int nr_to_scan);
[XFS] move inode reclaim functions to xfs_sync.c Background inode reclaim is run by the xfssyncd. Move the reclaim worker functions to be close to the sync code as the are very similar in structure and are both run from the same background thread. SGI-PV: 988142 SGI-Modid: xfs-linux-melb:xfs-kern:32329a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:37:03 +08:00
[XFS] mark inodes for reclaim via a tag in the inode radix tree Prepare for removing the deleted inode list by marking inodes for reclaim in the inode radix trees so that we can use the radix trees to find reclaimable inodes. SGI-PV: 988142 SGI-Modid: xfs-linux-melb:xfs-kern:32331a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:37:26 +08:00
void xfs_inode_set_reclaim_tag(struct xfs_inode *ip);
xfs: use generic inode iterator in xfs_qm_dqrele_all_inodes Use xfs_inode_ag_iterator instead of opencoding the inode walk in the quota code. Mark xfs_inode_ag_iterator and xfs_sync_inode_valid non-static to allow using them from the quota code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:35:27 +08:00
xfs: add EOFBLOCKS inode tagging/untagging Add the XFS_ICI_EOFBLOCKS_TAG inode tag to identify inodes with speculatively preallocated blocks beyond EOF. An inode is tagged when speculative preallocation occurs and untagged either via truncate down or when post-EOF blocks are freed via release or reclaim. The tag management is intentionally not aggressive to prefer simplicity over the complexity of handling all the corner cases under which post-EOF blocks could be freed (i.e., forward truncation, fallocate, write error conditions, etc.). This means that a tagged inode may or may not have post-EOF blocks after a period of time. The tag is eventually cleared when the inode is released or reclaimed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-06 22:50:38 +08:00
void xfs_inode_set_eofblocks_tag(struct xfs_inode *ip);
void xfs_inode_clear_eofblocks_tag(struct xfs_inode *ip);
xfs: create function to scan and clear EOFBLOCKS inodes xfs_inodes_free_eofblocks() implements scanning functionality for EOFBLOCKS inodes. It uses the AG iterator to walk the tagged inodes and free post-EOF blocks via the xfs_inode_free_eofblocks() execute function. The scan can be invoked in best-effort mode or wait (force) mode. A best-effort scan (default) handles all inodes that do not have a dirty cache and we successfully acquire the io lock via trylock. In wait mode, we continue to cycle through an AG until all inodes are handled. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-06 22:50:42 +08:00
int xfs_icache_free_eofblocks(struct xfs_mount *, int);
xfs: add EOFBLOCKS inode tagging/untagging Add the XFS_ICI_EOFBLOCKS_TAG inode tag to identify inodes with speculatively preallocated blocks beyond EOF. An inode is tagged when speculative preallocation occurs and untagged either via truncate down or when post-EOF blocks are freed via release or reclaim. The tag management is intentionally not aggressive to prefer simplicity over the complexity of handling all the corner cases under which post-EOF blocks could be freed (i.e., forward truncation, fallocate, write error conditions, etc.). This means that a tagged inode may or may not have post-EOF blocks after a period of time. The tag is eventually cleared when the inode is released or reclaimed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-06 22:50:38 +08:00
xfs: implement batched inode lookups for AG walking With the reclaim code separated from the generic walking code, it is simple to implement batched lookups for the generic walk code. Separate out the inode validation from the execute operations and modify the tree lookups to get a batch of inodes at a time. Reclaim operations will be optimised separately. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2010-09-28 10:28:19 +08:00
int xfs_sync_inode_grab(struct xfs_inode *ip);
xfs: use generic inode iterator in xfs_qm_dqrele_all_inodes Use xfs_inode_ag_iterator instead of opencoding the inode walk in the quota code. Mark xfs_inode_ag_iterator and xfs_sync_inode_valid non-static to allow using them from the quota code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:35:27 +08:00
int xfs_inode_ag_iterator(struct xfs_mount *mp,
xfs: support a tag-based inode_ag_iterator Genericize xfs_inode_ag_walk() to support an optional radix tree tag and args argument for the execute function. Create a new wrapper called xfs_inode_ag_iterator_tag() that performs a tag based walk of perag's and inodes. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-06 22:50:39 +08:00
int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag,
int flags, void *args),
int flags, void *args);
int xfs_inode_ag_iterator_tag(struct xfs_mount *mp,
int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag,
int flags, void *args),
int flags, void *args, int tag);
xfs: add a shrinker to background inode reclaim On low memory boxes or those with highmem, kernel can OOM before the background reclaims inodes via xfssyncd. Add a shrinker to run inode reclaim so that it inode reclaim is expedited when memory is low. This is more complex than it needs to be because the VM folk don't want a context added to the shrinker infrastructure. Hence we need to add a global list of XFS mount structures so the shrinker can traverse them. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-04-29 07:55:50 +08:00
[XFS] move sync code to its own file The sync code in XFS is spread around several files. While it used to make sense to have such a distribution, the code is about to be cleaned up and so centralising it in one spot as the first step makes sense. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32282a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 14:06:08 +08:00
#endif