p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/arch/arm/mach-at91/setup.c

256 lines
6.2 KiB
C
Raw Normal View History

at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
/*
* Copyright (C) 2007 Atmel Corporation.
* Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Under GPLv2
*/
#include <linux/module.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/cpu.h>
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 22:12:57 +08:00
#include <mach/at91_dbgu.h>
#include <mach/at91_pmc.h>
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
#include "soc.h"
#include "generic.h"
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 22:12:57 +08:00
struct at91_init_soc __initdata at91_boot_soc;
struct at91_socinfo at91_soc_initdata;
EXPORT_SYMBOL(at91_soc_initdata);
void __init at91rm9200_set_type(int type)
{
if (type == ARCH_REVISON_9200_PQFP)
at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
else
at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP;
}
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
at91: factorize at91 interrupts init to soc they are the same except the default priority Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
void __init at91_init_irq_default(void)
{
at91_init_interrupts(at91_boot_soc.default_irq_priority);
}
void __init at91_init_interrupts(unsigned int *priority)
{
/* Initialize the AIC interrupt controller */
at91_aic_init(priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
}
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
static struct map_desc at91_io_desc __initdata = {
.virtual = AT91_VA_BASE_SYS,
.pfn = __phys_to_pfn(AT91_BASE_SYS),
.length = SZ_16K,
.type = MT_DEVICE,
};
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 22:12:57 +08:00
#define AT91_DBGU0 0xfffff200
#define AT91_DBGU1 0xffffee00
static void __init soc_detect(u32 dbgu_base)
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
{
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 22:12:57 +08:00
u32 cidr, socid;
cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
socid = cidr & ~AT91_CIDR_VERSION;
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 22:12:57 +08:00
switch (socid) {
case ARCH_ID_AT91CAP9: {
#ifdef CONFIG_AT91_PMC_UNIT
u32 pmc_ver = at91_sys_read(AT91_PMC_VER);
if (pmc_ver == ARCH_REVISION_CAP9_B)
at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_B;
else if (pmc_ver == ARCH_REVISION_CAP9_C)
at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_C;
#endif
at91_soc_initdata.type = AT91_SOC_CAP9;
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
at91_boot_soc = at91cap9_soc;
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 22:12:57 +08:00
break;
}
case ARCH_ID_AT91RM9200:
at91_soc_initdata.type = AT91_SOC_RM9200;
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
at91_boot_soc = at91rm9200_soc;
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 22:12:57 +08:00
break;
case ARCH_ID_AT91SAM9260:
at91_soc_initdata.type = AT91_SOC_SAM9260;
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
at91_boot_soc = at91sam9260_soc;
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 22:12:57 +08:00
break;
case ARCH_ID_AT91SAM9261:
at91_soc_initdata.type = AT91_SOC_SAM9261;
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
at91_boot_soc = at91sam9261_soc;
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 22:12:57 +08:00
break;
case ARCH_ID_AT91SAM9263:
at91_soc_initdata.type = AT91_SOC_SAM9263;
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
at91_boot_soc = at91sam9263_soc;
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 22:12:57 +08:00
break;
case ARCH_ID_AT91SAM9G20:
at91_soc_initdata.type = AT91_SOC_SAM9G20;
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
at91_boot_soc = at91sam9260_soc;
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 22:12:57 +08:00
break;
case ARCH_ID_AT91SAM9G45:
at91_soc_initdata.type = AT91_SOC_SAM9G45;
if (cidr == ARCH_ID_AT91SAM9G45ES)
at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES;
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
at91_boot_soc = at91sam9g45_soc;
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 22:12:57 +08:00
break;
case ARCH_ID_AT91SAM9RL64:
at91_soc_initdata.type = AT91_SOC_SAM9RL;
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
at91_boot_soc = at91sam9rl_soc;
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 22:12:57 +08:00
break;
case ARCH_ID_AT91SAM9X5:
at91_soc_initdata.type = AT91_SOC_SAM9X5;
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
at91_boot_soc = at91sam9x5_soc;
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 22:12:57 +08:00
break;
}
/* at91sam9g10 */
if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
at91_soc_initdata.type = AT91_SOC_SAM9G10;
at91_boot_soc = at91sam9261_soc;
}
/* at91sam9xe */
else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
at91_soc_initdata.type = AT91_SOC_SAM9260;
at91_soc_initdata.subtype = AT91_SOC_SAM9XE;
at91_boot_soc = at91sam9260_soc;
}
if (!at91_soc_is_detected())
return;
at91_soc_initdata.cidr = cidr;
/* sub version of soc */
at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
if (at91_soc_initdata.type == AT91_SOC_SAM9G45) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_AT91SAM9M10:
at91_soc_initdata.subtype = AT91_SOC_SAM9M10;
break;
case ARCH_EXID_AT91SAM9G46:
at91_soc_initdata.subtype = AT91_SOC_SAM9G46;
break;
case ARCH_EXID_AT91SAM9M11:
at91_soc_initdata.subtype = AT91_SOC_SAM9M11;
break;
}
}
if (at91_soc_initdata.type == AT91_SOC_SAM9X5) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_AT91SAM9G15:
at91_soc_initdata.subtype = AT91_SOC_SAM9G15;
break;
case ARCH_EXID_AT91SAM9G35:
at91_soc_initdata.subtype = AT91_SOC_SAM9G35;
break;
case ARCH_EXID_AT91SAM9X35:
at91_soc_initdata.subtype = AT91_SOC_SAM9X35;
break;
case ARCH_EXID_AT91SAM9G25:
at91_soc_initdata.subtype = AT91_SOC_SAM9G25;
break;
case ARCH_EXID_AT91SAM9X25:
at91_soc_initdata.subtype = AT91_SOC_SAM9X25;
break;
}
}
}
static const char *soc_name[] = {
[AT91_SOC_RM9200] = "at91rm9200",
[AT91_SOC_CAP9] = "at91cap9",
[AT91_SOC_SAM9260] = "at91sam9260",
[AT91_SOC_SAM9261] = "at91sam9261",
[AT91_SOC_SAM9263] = "at91sam9263",
[AT91_SOC_SAM9G10] = "at91sam9g10",
[AT91_SOC_SAM9G20] = "at91sam9g20",
[AT91_SOC_SAM9G45] = "at91sam9g45",
[AT91_SOC_SAM9RL] = "at91sam9rl",
[AT91_SOC_SAM9X5] = "at91sam9x5",
[AT91_SOC_NONE] = "Unknown"
};
const char *at91_get_soc_type(struct at91_socinfo *c)
{
return soc_name[c->type];
}
EXPORT_SYMBOL(at91_get_soc_type);
static const char *soc_subtype_name[] = {
[AT91_SOC_RM9200_BGA] = "at91rm9200 BGA",
[AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP",
[AT91_SOC_CAP9_REV_B] = "at91cap9 revB",
[AT91_SOC_CAP9_REV_C] = "at91cap9 revC",
[AT91_SOC_SAM9XE] = "at91sam9xe",
[AT91_SOC_SAM9G45ES] = "at91sam9g45es",
[AT91_SOC_SAM9M10] = "at91sam9m10",
[AT91_SOC_SAM9G46] = "at91sam9g46",
[AT91_SOC_SAM9M11] = "at91sam9m11",
[AT91_SOC_SAM9G15] = "at91sam9g15",
[AT91_SOC_SAM9G35] = "at91sam9g35",
[AT91_SOC_SAM9X35] = "at91sam9x35",
[AT91_SOC_SAM9G25] = "at91sam9g25",
[AT91_SOC_SAM9X25] = "at91sam9x25",
[AT91_SOC_SUBTYPE_NONE] = "Unknown"
};
const char *at91_get_soc_subtype(struct at91_socinfo *c)
{
return soc_subtype_name[c->subtype];
}
EXPORT_SYMBOL(at91_get_soc_subtype);
void __init at91_map_io(void)
{
/* Map peripherals */
iotable_init(&at91_io_desc, 1);
at91_soc_initdata.type = AT91_SOC_NONE;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
soc_detect(AT91_DBGU0);
if (!at91_soc_is_detected())
soc_detect(AT91_DBGU1);
if (!at91_soc_is_detected())
panic("AT91: Impossible to detect the SOC type");
pr_info("AT91: Detected soc type: %s\n",
at91_get_soc_type(&at91_soc_initdata));
pr_info("AT91: Detected soc subtype: %s\n",
at91_get_soc_subtype(&at91_soc_initdata));
if (!at91_soc_is_enabled())
panic("AT91: Soc not enabled");
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
if (at91_boot_soc.map_io)
at91_boot_soc.map_io();
}
void __init at91_initialize(unsigned long main_clock)
{
at91: move clock subsystem init to soc generic init Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-24 18:20:28 +08:00
/* Init clock subsystem */
at91_clock_init(main_clock);
at91_boot_soc.init();
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 15:28:34 +08:00
}