linux_old1/drivers/atm/fore200e.h

980 lines
39 KiB
C
Raw Normal View History

#ifndef _FORE200E_H
#define _FORE200E_H
#ifdef __KERNEL__
/* rx buffer sizes */
#define SMALL_BUFFER_SIZE 384 /* size of small buffers (multiple of 48 (PCA) and 64 (SBA) bytes) */
#define LARGE_BUFFER_SIZE 4032 /* size of large buffers (multiple of 48 (PCA) and 64 (SBA) bytes) */
#define RBD_BLK_SIZE 32 /* nbr of supplied rx buffers per rbd */
#define MAX_PDU_SIZE 65535 /* maximum PDU size supported by AALs */
#define BUFFER_S1_SIZE SMALL_BUFFER_SIZE /* size of small buffers, scheme 1 */
#define BUFFER_L1_SIZE LARGE_BUFFER_SIZE /* size of large buffers, scheme 1 */
#define BUFFER_S2_SIZE SMALL_BUFFER_SIZE /* size of small buffers, scheme 2 */
#define BUFFER_L2_SIZE LARGE_BUFFER_SIZE /* size of large buffers, scheme 2 */
#define BUFFER_S1_NBR (RBD_BLK_SIZE * 6)
#define BUFFER_L1_NBR (RBD_BLK_SIZE * 4)
#define BUFFER_S2_NBR (RBD_BLK_SIZE * 6)
#define BUFFER_L2_NBR (RBD_BLK_SIZE * 4)
#define QUEUE_SIZE_CMD 16 /* command queue capacity */
#define QUEUE_SIZE_RX 64 /* receive queue capacity */
#define QUEUE_SIZE_TX 256 /* transmit queue capacity */
#define QUEUE_SIZE_BS 32 /* buffer supply queue capacity */
#define FORE200E_VPI_BITS 0
#define FORE200E_VCI_BITS 10
#define NBR_CONNECT (1 << (FORE200E_VPI_BITS + FORE200E_VCI_BITS)) /* number of connections */
#define TSD_FIXED 2
#define TSD_EXTENSION 0
#define TSD_NBR (TSD_FIXED + TSD_EXTENSION)
/* the cp starts putting a received PDU into one *small* buffer,
then it uses a number of *large* buffers for the trailing data.
we compute here the total number of receive segment descriptors
required to hold the largest possible PDU */
#define RSD_REQUIRED (((MAX_PDU_SIZE - SMALL_BUFFER_SIZE + LARGE_BUFFER_SIZE) / LARGE_BUFFER_SIZE) + 1)
#define RSD_FIXED 3
/* RSD_REQUIRED receive segment descriptors are enough to describe a max-sized PDU,
but we have to keep the size of the receive PDU descriptor multiple of 32 bytes,
so we add one extra RSD to RSD_EXTENSION
(WARNING: THIS MAY CHANGE IF BUFFER SIZES ARE MODIFIED) */
#define RSD_EXTENSION ((RSD_REQUIRED - RSD_FIXED) + 1)
#define RSD_NBR (RSD_FIXED + RSD_EXTENSION)
#define FORE200E_DEV(d) ((struct fore200e*)((d)->dev_data))
#define FORE200E_VCC(d) ((struct fore200e_vcc*)((d)->dev_data))
/* bitfields endian games */
#if defined(__LITTLE_ENDIAN_BITFIELD)
#define BITFIELD2(b1, b2) b1; b2;
#define BITFIELD3(b1, b2, b3) b1; b2; b3;
#define BITFIELD4(b1, b2, b3, b4) b1; b2; b3; b4;
#define BITFIELD5(b1, b2, b3, b4, b5) b1; b2; b3; b4; b5;
#define BITFIELD6(b1, b2, b3, b4, b5, b6) b1; b2; b3; b4; b5; b6;
#elif defined(__BIG_ENDIAN_BITFIELD)
#define BITFIELD2(b1, b2) b2; b1;
#define BITFIELD3(b1, b2, b3) b3; b2; b1;
#define BITFIELD4(b1, b2, b3, b4) b4; b3; b2; b1;
#define BITFIELD5(b1, b2, b3, b4, b5) b5; b4; b3; b2; b1;
#define BITFIELD6(b1, b2, b3, b4, b5, b6) b6; b5; b4; b3; b2; b1;
#else
#error unknown bitfield endianess
#endif
/* ATM cell header (minus HEC byte) */
typedef struct atm_header {
BITFIELD5(
u32 clp : 1, /* cell loss priority */
u32 plt : 3, /* payload type */
u32 vci : 16, /* virtual channel identifier */
u32 vpi : 8, /* virtual path identifier */
u32 gfc : 4 /* generic flow control */
)
} atm_header_t;
/* ATM adaptation layer id */
typedef enum fore200e_aal {
FORE200E_AAL0 = 0,
FORE200E_AAL34 = 4,
FORE200E_AAL5 = 5,
} fore200e_aal_t;
/* transmit PDU descriptor specification */
typedef struct tpd_spec {
BITFIELD4(
u32 length : 16, /* total PDU length */
u32 nseg : 8, /* number of transmit segments */
enum fore200e_aal aal : 4, /* adaptation layer */
u32 intr : 4 /* interrupt requested */
)
} tpd_spec_t;
/* transmit PDU rate control */
typedef struct tpd_rate
{
BITFIELD2(
u32 idle_cells : 16, /* number of idle cells to insert */
u32 data_cells : 16 /* number of data cells to transmit */
)
} tpd_rate_t;
/* transmit segment descriptor */
typedef struct tsd {
u32 buffer; /* transmit buffer DMA address */
u32 length; /* number of bytes in buffer */
} tsd_t;
/* transmit PDU descriptor */
typedef struct tpd {
struct atm_header atm_header; /* ATM header minus HEC byte */
struct tpd_spec spec; /* tpd specification */
struct tpd_rate rate; /* tpd rate control */
u32 pad; /* reserved */
struct tsd tsd[ TSD_NBR ]; /* transmit segment descriptors */
} tpd_t;
/* receive segment descriptor */
typedef struct rsd {
u32 handle; /* host supplied receive buffer handle */
u32 length; /* number of bytes in buffer */
} rsd_t;
/* receive PDU descriptor */
typedef struct rpd {
struct atm_header atm_header; /* ATM header minus HEC byte */
u32 nseg; /* number of receive segments */
struct rsd rsd[ RSD_NBR ]; /* receive segment descriptors */
} rpd_t;
/* buffer scheme */
typedef enum buffer_scheme {
BUFFER_SCHEME_ONE,
BUFFER_SCHEME_TWO,
BUFFER_SCHEME_NBR /* always last */
} buffer_scheme_t;
/* buffer magnitude */
typedef enum buffer_magn {
BUFFER_MAGN_SMALL,
BUFFER_MAGN_LARGE,
BUFFER_MAGN_NBR /* always last */
} buffer_magn_t;
/* receive buffer descriptor */
typedef struct rbd {
u32 handle; /* host supplied handle */
u32 buffer_haddr; /* host DMA address of host buffer */
} rbd_t;
/* receive buffer descriptor block */
typedef struct rbd_block {
struct rbd rbd[ RBD_BLK_SIZE ]; /* receive buffer descriptor */
} rbd_block_t;
/* tpd DMA address */
typedef struct tpd_haddr {
BITFIELD3(
u32 size : 4, /* tpd size expressed in 32 byte blocks */
u32 pad : 1, /* reserved */
u32 haddr : 27 /* tpd DMA addr aligned on 32 byte boundary */
)
} tpd_haddr_t;
#define TPD_HADDR_SHIFT 5 /* addr aligned on 32 byte boundary */
/* cp resident transmit queue entry */
typedef struct cp_txq_entry {
struct tpd_haddr tpd_haddr; /* host DMA address of tpd */
u32 status_haddr; /* host DMA address of completion status */
} cp_txq_entry_t;
/* cp resident receive queue entry */
typedef struct cp_rxq_entry {
u32 rpd_haddr; /* host DMA address of rpd */
u32 status_haddr; /* host DMA address of completion status */
} cp_rxq_entry_t;
/* cp resident buffer supply queue entry */
typedef struct cp_bsq_entry {
u32 rbd_block_haddr; /* host DMA address of rbd block */
u32 status_haddr; /* host DMA address of completion status */
} cp_bsq_entry_t;
/* completion status */
typedef volatile enum status {
STATUS_PENDING = (1<<0), /* initial status (written by host) */
STATUS_COMPLETE = (1<<1), /* completion status (written by cp) */
STATUS_FREE = (1<<2), /* initial status (written by host) */
STATUS_ERROR = (1<<3) /* completion status (written by cp) */
} status_t;
/* cp operation code */
typedef enum opcode {
OPCODE_INITIALIZE = 1, /* initialize board */
OPCODE_ACTIVATE_VCIN, /* activate incoming VCI */
OPCODE_ACTIVATE_VCOUT, /* activate outgoing VCI */
OPCODE_DEACTIVATE_VCIN, /* deactivate incoming VCI */
OPCODE_DEACTIVATE_VCOUT, /* deactivate incoing VCI */
OPCODE_GET_STATS, /* get board statistics */
OPCODE_SET_OC3, /* set OC-3 registers */
OPCODE_GET_OC3, /* get OC-3 registers */
OPCODE_RESET_STATS, /* reset board statistics */
OPCODE_GET_PROM, /* get expansion PROM data (PCI specific) */
OPCODE_SET_VPI_BITS, /* set x bits of those decoded by the
firmware to be low order bits from
the VPI field of the ATM cell header */
OPCODE_REQUEST_INTR = (1<<7) /* request interrupt */
} opcode_t;
/* virtual path / virtual channel identifiers */
typedef struct vpvc {
BITFIELD3(
u32 vci : 16, /* virtual channel identifier */
u32 vpi : 8, /* virtual path identifier */
u32 pad : 8 /* reserved */
)
} vpvc_t;
/* activate VC command opcode */
typedef struct activate_opcode {
BITFIELD4(
enum opcode opcode : 8, /* cp opcode */
enum fore200e_aal aal : 8, /* adaptation layer */
enum buffer_scheme scheme : 8, /* buffer scheme */
u32 pad : 8 /* reserved */
)
} activate_opcode_t;
/* activate VC command block */
typedef struct activate_block {
struct activate_opcode opcode; /* activate VC command opcode */
struct vpvc vpvc; /* VPI/VCI */
u32 mtu; /* for AAL0 only */
} activate_block_t;
/* deactivate VC command opcode */
typedef struct deactivate_opcode {
BITFIELD2(
enum opcode opcode : 8, /* cp opcode */
u32 pad : 24 /* reserved */
)
} deactivate_opcode_t;
/* deactivate VC command block */
typedef struct deactivate_block {
struct deactivate_opcode opcode; /* deactivate VC command opcode */
struct vpvc vpvc; /* VPI/VCI */
} deactivate_block_t;
/* OC-3 registers */
typedef struct oc3_regs {
u32 reg[ 128 ]; /* see the PMC Sierra PC5346 S/UNI-155-Lite
Saturn User Network Interface documentation
for a description of the OC-3 chip registers */
} oc3_regs_t;
/* set/get OC-3 regs command opcode */
typedef struct oc3_opcode {
BITFIELD4(
enum opcode opcode : 8, /* cp opcode */
u32 reg : 8, /* register index */
u32 value : 8, /* register value */
u32 mask : 8 /* register mask that specifies which
bits of the register value field
are significant */
)
} oc3_opcode_t;
/* set/get OC-3 regs command block */
typedef struct oc3_block {
struct oc3_opcode opcode; /* set/get OC-3 regs command opcode */
u32 regs_haddr; /* host DMA address of OC-3 regs buffer */
} oc3_block_t;
/* physical encoding statistics */
typedef struct stats_phy {
__be32 crc_header_errors; /* cells received with bad header CRC */
__be32 framing_errors; /* cells received with bad framing */
__be32 pad[ 2 ]; /* i960 padding */
} stats_phy_t;
/* OC-3 statistics */
typedef struct stats_oc3 {
__be32 section_bip8_errors; /* section 8 bit interleaved parity */
__be32 path_bip8_errors; /* path 8 bit interleaved parity */
__be32 line_bip24_errors; /* line 24 bit interleaved parity */
__be32 line_febe_errors; /* line far end block errors */
__be32 path_febe_errors; /* path far end block errors */
__be32 corr_hcs_errors; /* correctable header check sequence */
__be32 ucorr_hcs_errors; /* uncorrectable header check sequence */
__be32 pad[ 1 ]; /* i960 padding */
} stats_oc3_t;
/* ATM statistics */
typedef struct stats_atm {
__be32 cells_transmitted; /* cells transmitted */
__be32 cells_received; /* cells received */
__be32 vpi_bad_range; /* cell drops: VPI out of range */
__be32 vpi_no_conn; /* cell drops: no connection for VPI */
__be32 vci_bad_range; /* cell drops: VCI out of range */
__be32 vci_no_conn; /* cell drops: no connection for VCI */
__be32 pad[ 2 ]; /* i960 padding */
} stats_atm_t;
/* AAL0 statistics */
typedef struct stats_aal0 {
__be32 cells_transmitted; /* cells transmitted */
__be32 cells_received; /* cells received */
__be32 cells_dropped; /* cells dropped */
__be32 pad[ 1 ]; /* i960 padding */
} stats_aal0_t;
/* AAL3/4 statistics */
typedef struct stats_aal34 {
__be32 cells_transmitted; /* cells transmitted from segmented PDUs */
__be32 cells_received; /* cells reassembled into PDUs */
__be32 cells_crc_errors; /* payload CRC error count */
__be32 cells_protocol_errors; /* SAR or CS layer protocol errors */
__be32 cells_dropped; /* cells dropped: partial reassembly */
__be32 cspdus_transmitted; /* CS PDUs transmitted */
__be32 cspdus_received; /* CS PDUs received */
__be32 cspdus_protocol_errors; /* CS layer protocol errors */
__be32 cspdus_dropped; /* reassembled PDUs drop'd (in cells) */
__be32 pad[ 3 ]; /* i960 padding */
} stats_aal34_t;
/* AAL5 statistics */
typedef struct stats_aal5 {
__be32 cells_transmitted; /* cells transmitted from segmented SDUs */
__be32 cells_received; /* cells reassembled into SDUs */
__be32 cells_dropped; /* reassembled PDUs dropped (in cells) */
__be32 congestion_experienced; /* CRC error and length wrong */
__be32 cspdus_transmitted; /* CS PDUs transmitted */
__be32 cspdus_received; /* CS PDUs received */
__be32 cspdus_crc_errors; /* CS PDUs CRC errors */
__be32 cspdus_protocol_errors; /* CS layer protocol errors */
__be32 cspdus_dropped; /* reassembled PDUs dropped */
__be32 pad[ 3 ]; /* i960 padding */
} stats_aal5_t;
/* auxiliary statistics */
typedef struct stats_aux {
__be32 small_b1_failed; /* receive BD allocation failures */
__be32 large_b1_failed; /* receive BD allocation failures */
__be32 small_b2_failed; /* receive BD allocation failures */
__be32 large_b2_failed; /* receive BD allocation failures */
__be32 rpd_alloc_failed; /* receive PDU allocation failures */
__be32 receive_carrier; /* no carrier = 0, carrier = 1 */
__be32 pad[ 2 ]; /* i960 padding */
} stats_aux_t;
/* whole statistics buffer */
typedef struct stats {
struct stats_phy phy; /* physical encoding statistics */
struct stats_oc3 oc3; /* OC-3 statistics */
struct stats_atm atm; /* ATM statistics */
struct stats_aal0 aal0; /* AAL0 statistics */
struct stats_aal34 aal34; /* AAL3/4 statistics */
struct stats_aal5 aal5; /* AAL5 statistics */
struct stats_aux aux; /* auxiliary statistics */
} stats_t;
/* get statistics command opcode */
typedef struct stats_opcode {
BITFIELD2(
enum opcode opcode : 8, /* cp opcode */
u32 pad : 24 /* reserved */
)
} stats_opcode_t;
/* get statistics command block */
typedef struct stats_block {
struct stats_opcode opcode; /* get statistics command opcode */
u32 stats_haddr; /* host DMA address of stats buffer */
} stats_block_t;
/* expansion PROM data (PCI specific) */
typedef struct prom_data {
u32 hw_revision; /* hardware revision */
u32 serial_number; /* board serial number */
u8 mac_addr[ 8 ]; /* board MAC address */
} prom_data_t;
/* get expansion PROM data command opcode */
typedef struct prom_opcode {
BITFIELD2(
enum opcode opcode : 8, /* cp opcode */
u32 pad : 24 /* reserved */
)
} prom_opcode_t;
/* get expansion PROM data command block */
typedef struct prom_block {
struct prom_opcode opcode; /* get PROM data command opcode */
u32 prom_haddr; /* host DMA address of PROM buffer */
} prom_block_t;
/* cp command */
typedef union cmd {
enum opcode opcode; /* operation code */
struct activate_block activate_block; /* activate VC */
struct deactivate_block deactivate_block; /* deactivate VC */
struct stats_block stats_block; /* get statistics */
struct prom_block prom_block; /* get expansion PROM data */
struct oc3_block oc3_block; /* get/set OC-3 registers */
u32 pad[ 4 ]; /* i960 padding */
} cmd_t;
/* cp resident command queue */
typedef struct cp_cmdq_entry {
union cmd cmd; /* command */
u32 status_haddr; /* host DMA address of completion status */
u32 pad[ 3 ]; /* i960 padding */
} cp_cmdq_entry_t;
/* host resident transmit queue entry */
typedef struct host_txq_entry {
struct cp_txq_entry __iomem *cp_entry; /* addr of cp resident tx queue entry */
enum status* status; /* addr of host resident status */
struct tpd* tpd; /* addr of transmit PDU descriptor */
u32 tpd_dma; /* DMA address of tpd */
struct sk_buff* skb; /* related skb */
void* data; /* copy of misaligned data */
unsigned long incarn; /* vc_map incarnation when submitted for tx */
struct fore200e_vc_map* vc_map;
} host_txq_entry_t;
/* host resident receive queue entry */
typedef struct host_rxq_entry {
struct cp_rxq_entry __iomem *cp_entry; /* addr of cp resident rx queue entry */
enum status* status; /* addr of host resident status */
struct rpd* rpd; /* addr of receive PDU descriptor */
u32 rpd_dma; /* DMA address of rpd */
} host_rxq_entry_t;
/* host resident buffer supply queue entry */
typedef struct host_bsq_entry {
struct cp_bsq_entry __iomem *cp_entry; /* addr of cp resident buffer supply queue entry */
enum status* status; /* addr of host resident status */
struct rbd_block* rbd_block; /* addr of receive buffer descriptor block */
u32 rbd_block_dma; /* DMA address od rdb */
} host_bsq_entry_t;
/* host resident command queue entry */
typedef struct host_cmdq_entry {
struct cp_cmdq_entry __iomem *cp_entry; /* addr of cp resident cmd queue entry */
enum status *status; /* addr of host resident status */
} host_cmdq_entry_t;
/* chunk of memory */
typedef struct chunk {
void* alloc_addr; /* base address of allocated chunk */
void* align_addr; /* base address of aligned chunk */
dma_addr_t dma_addr; /* DMA address of aligned chunk */
int direction; /* direction of DMA mapping */
u32 alloc_size; /* length of allocated chunk */
u32 align_size; /* length of aligned chunk */
} chunk_t;
#define dma_size align_size /* DMA useable size */
/* host resident receive buffer */
typedef struct buffer {
struct buffer* next; /* next receive buffer */
enum buffer_scheme scheme; /* buffer scheme */
enum buffer_magn magn; /* buffer magnitude */
struct chunk data; /* data buffer */
#ifdef FORE200E_BSQ_DEBUG
unsigned long index; /* buffer # in queue */
int supplied; /* 'buffer supplied' flag */
#endif
} buffer_t;
#if (BITS_PER_LONG == 32)
#define FORE200E_BUF2HDL(buffer) ((u32)(buffer))
#define FORE200E_HDL2BUF(handle) ((struct buffer*)(handle))
#else /* deal with 64 bit pointers */
#define FORE200E_BUF2HDL(buffer) ((u32)((u64)(buffer)))
#define FORE200E_HDL2BUF(handle) ((struct buffer*)(((u64)(handle)) | PAGE_OFFSET))
#endif
/* host resident command queue */
typedef struct host_cmdq {
struct host_cmdq_entry host_entry[ QUEUE_SIZE_CMD ]; /* host resident cmd queue entries */
int head; /* head of cmd queue */
struct chunk status; /* array of completion status */
} host_cmdq_t;
/* host resident transmit queue */
typedef struct host_txq {
struct host_txq_entry host_entry[ QUEUE_SIZE_TX ]; /* host resident tx queue entries */
int head; /* head of tx queue */
int tail; /* tail of tx queue */
struct chunk tpd; /* array of tpds */
struct chunk status; /* arry of completion status */
int txing; /* number of pending PDUs in tx queue */
} host_txq_t;
/* host resident receive queue */
typedef struct host_rxq {
struct host_rxq_entry host_entry[ QUEUE_SIZE_RX ]; /* host resident rx queue entries */
int head; /* head of rx queue */
struct chunk rpd; /* array of rpds */
struct chunk status; /* array of completion status */
} host_rxq_t;
/* host resident buffer supply queues */
typedef struct host_bsq {
struct host_bsq_entry host_entry[ QUEUE_SIZE_BS ]; /* host resident buffer supply queue entries */
int head; /* head of buffer supply queue */
struct chunk rbd_block; /* array of rbds */
struct chunk status; /* array of completion status */
struct buffer* buffer; /* array of rx buffers */
struct buffer* freebuf; /* list of free rx buffers */
volatile int freebuf_count; /* count of free rx buffers */
} host_bsq_t;
/* header of the firmware image */
typedef struct fw_header {
__le32 magic; /* magic number */
__le32 version; /* firmware version id */
__le32 load_offset; /* fw load offset in board memory */
__le32 start_offset; /* fw execution start address in board memory */
} fw_header_t;
#define FW_HEADER_MAGIC 0x65726f66 /* 'fore' */
/* receive buffer supply queues scheme specification */
typedef struct bs_spec {
u32 queue_length; /* queue capacity */
u32 buffer_size; /* host buffer size */
u32 pool_size; /* number of rbds */
u32 supply_blksize; /* num of rbds in I/O block (multiple
of 4 between 4 and 124 inclusive) */
} bs_spec_t;
/* initialization command block (one-time command, not in cmd queue) */
typedef struct init_block {
enum opcode opcode; /* initialize command */
enum status status; /* related status word */
u32 receive_threshold; /* not used */
u32 num_connect; /* ATM connections */
u32 cmd_queue_len; /* length of command queue */
u32 tx_queue_len; /* length of transmit queue */
u32 rx_queue_len; /* length of receive queue */
u32 rsd_extension; /* number of extra 32 byte blocks */
u32 tsd_extension; /* number of extra 32 byte blocks */
u32 conless_vpvc; /* not used */
u32 pad[ 2 ]; /* force quad alignment */
struct bs_spec bs_spec[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ]; /* buffer supply queues spec */
} init_block_t;
typedef enum media_type {
MEDIA_TYPE_CAT5_UTP = 0x06, /* unshielded twisted pair */
MEDIA_TYPE_MM_OC3_ST = 0x16, /* multimode fiber ST */
MEDIA_TYPE_MM_OC3_SC = 0x26, /* multimode fiber SC */
MEDIA_TYPE_SM_OC3_ST = 0x36, /* single-mode fiber ST */
MEDIA_TYPE_SM_OC3_SC = 0x46 /* single-mode fiber SC */
} media_type_t;
#define FORE200E_MEDIA_INDEX(media_type) ((media_type)>>4)
/* cp resident queues */
typedef struct cp_queues {
u32 cp_cmdq; /* command queue */
u32 cp_txq; /* transmit queue */
u32 cp_rxq; /* receive queue */
u32 cp_bsq[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ]; /* buffer supply queues */
u32 imask; /* 1 enables cp to host interrupts */
u32 istat; /* 1 for interrupt posted */
u32 heap_base; /* offset form beginning of ram */
u32 heap_size; /* space available for queues */
u32 hlogger; /* non zero for host logging */
u32 heartbeat; /* cp heartbeat */
u32 fw_release; /* firmware version */
u32 mon960_release; /* i960 monitor version */
u32 tq_plen; /* transmit throughput measurements */
/* make sure the init block remains on a quad word boundary */
struct init_block init; /* one time cmd, not in cmd queue */
enum media_type media_type; /* media type id */
u32 oc3_revision; /* OC-3 revision number */
} cp_queues_t;
/* boot status */
typedef enum boot_status {
BSTAT_COLD_START = (u32) 0xc01dc01d, /* cold start */
BSTAT_SELFTEST_OK = (u32) 0x02201958, /* self-test ok */
BSTAT_SELFTEST_FAIL = (u32) 0xadbadbad, /* self-test failed */
BSTAT_CP_RUNNING = (u32) 0xce11feed, /* cp is running */
BSTAT_MON_TOO_BIG = (u32) 0x10aded00 /* i960 monitor is too big */
} boot_status_t;
/* software UART */
typedef struct soft_uart {
u32 send; /* write register */
u32 recv; /* read register */
} soft_uart_t;
#define FORE200E_CP_MONITOR_UART_FREE 0x00000000
#define FORE200E_CP_MONITOR_UART_AVAIL 0x01000000
/* i960 monitor */
typedef struct cp_monitor {
struct soft_uart soft_uart; /* software UART */
enum boot_status bstat; /* boot status */
u32 app_base; /* application base offset */
u32 mon_version; /* i960 monitor version */
} cp_monitor_t;
/* device state */
typedef enum fore200e_state {
FORE200E_STATE_BLANK, /* initial state */
FORE200E_STATE_REGISTER, /* device registered */
FORE200E_STATE_CONFIGURE, /* bus interface configured */
FORE200E_STATE_MAP, /* board space mapped in host memory */
FORE200E_STATE_RESET, /* board resetted */
FORE200E_STATE_START_FW, /* firmware started */
FORE200E_STATE_INITIALIZE, /* initialize command successful */
FORE200E_STATE_INIT_CMDQ, /* command queue initialized */
FORE200E_STATE_INIT_TXQ, /* transmit queue initialized */
FORE200E_STATE_INIT_RXQ, /* receive queue initialized */
FORE200E_STATE_INIT_BSQ, /* buffer supply queue initialized */
FORE200E_STATE_ALLOC_BUF, /* receive buffers allocated */
FORE200E_STATE_IRQ, /* host interrupt requested */
FORE200E_STATE_COMPLETE /* initialization completed */
} fore200e_state;
/* PCA-200E registers */
typedef struct fore200e_pca_regs {
volatile u32 __iomem * hcr; /* address of host control register */
volatile u32 __iomem * imr; /* address of host interrupt mask register */
volatile u32 __iomem * psr; /* address of PCI specific register */
} fore200e_pca_regs_t;
/* SBA-200E registers */
typedef struct fore200e_sba_regs {
u32 __iomem *hcr; /* address of host control register */
u32 __iomem *bsr; /* address of burst transfer size register */
u32 __iomem *isr; /* address of interrupt level selection register */
} fore200e_sba_regs_t;
/* model-specific registers */
typedef union fore200e_regs {
struct fore200e_pca_regs pca; /* PCA-200E registers */
struct fore200e_sba_regs sba; /* SBA-200E registers */
} fore200e_regs;
struct fore200e;
/* bus-dependent data */
typedef struct fore200e_bus {
char* model_name; /* board model name */
char* proc_name; /* board name under /proc/atm */
int descr_alignment; /* tpd/rpd/rbd DMA alignment requirement */
int buffer_alignment; /* rx buffers DMA alignment requirement */
int status_alignment; /* status words DMA alignment requirement */
u32 (*read)(volatile u32 __iomem *);
void (*write)(u32, volatile u32 __iomem *);
u32 (*dma_map)(struct fore200e*, void*, int, int);
void (*dma_unmap)(struct fore200e*, u32, int, int);
void (*dma_sync_for_cpu)(struct fore200e*, u32, int, int);
void (*dma_sync_for_device)(struct fore200e*, u32, int, int);
int (*dma_chunk_alloc)(struct fore200e*, struct chunk*, int, int, int);
void (*dma_chunk_free)(struct fore200e*, struct chunk*);
int (*configure)(struct fore200e*);
int (*map)(struct fore200e*);
void (*reset)(struct fore200e*);
int (*prom_read)(struct fore200e*, struct prom_data*);
void (*unmap)(struct fore200e*);
void (*irq_enable)(struct fore200e*);
int (*irq_check)(struct fore200e*);
void (*irq_ack)(struct fore200e*);
int (*proc_read)(struct fore200e*, char*);
} fore200e_bus_t;
/* vc mapping */
typedef struct fore200e_vc_map {
struct atm_vcc* vcc; /* vcc entry */
unsigned long incarn; /* vcc incarnation number */
} fore200e_vc_map_t;
#define FORE200E_VC_MAP(fore200e, vpi, vci) \
(& (fore200e)->vc_map[ ((vpi) << FORE200E_VCI_BITS) | (vci) ])
/* per-device data */
typedef struct fore200e {
struct list_head entry; /* next device */
const struct fore200e_bus* bus; /* bus-dependent code and data */
union fore200e_regs regs; /* bus-dependent registers */
struct atm_dev* atm_dev; /* ATM device */
enum fore200e_state state; /* device state */
char name[16]; /* device name */
void* bus_dev; /* bus-specific kernel data */
int irq; /* irq number */
unsigned long phys_base; /* physical base address */
void __iomem * virt_base; /* virtual base address */
unsigned char esi[ ESI_LEN ]; /* end system identifier */
struct cp_monitor __iomem * cp_monitor; /* i960 monitor address */
struct cp_queues __iomem * cp_queues; /* cp resident queues */
struct host_cmdq host_cmdq; /* host resident cmd queue */
struct host_txq host_txq; /* host resident tx queue */
struct host_rxq host_rxq; /* host resident rx queue */
/* host resident buffer supply queues */
struct host_bsq host_bsq[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ];
u32 available_cell_rate; /* remaining pseudo-CBR bw on link */
int loop_mode; /* S/UNI loopback mode */
struct stats* stats; /* last snapshot of the stats */
struct mutex rate_mtx; /* protects rate reservation ops */
spinlock_t q_lock; /* protects queue ops */
#ifdef FORE200E_USE_TASKLET
struct tasklet_struct tx_tasklet; /* performs tx interrupt work */
struct tasklet_struct rx_tasklet; /* performs rx interrupt work */
#endif
unsigned long tx_sat; /* tx queue saturation count */
unsigned long incarn_count;
struct fore200e_vc_map vc_map[ NBR_CONNECT ]; /* vc mapping */
} fore200e_t;
/* per-vcc data */
typedef struct fore200e_vcc {
enum buffer_scheme scheme; /* rx buffer scheme */
struct tpd_rate rate; /* tx rate control data */
int rx_min_pdu; /* size of smallest PDU received */
int rx_max_pdu; /* size of largest PDU received */
int tx_min_pdu; /* size of smallest PDU transmitted */
int tx_max_pdu; /* size of largest PDU transmitted */
unsigned long tx_pdu; /* nbr of tx pdus */
unsigned long rx_pdu; /* nbr of rx pdus */
} fore200e_vcc_t;
/* 200E-series common memory layout */
#define FORE200E_CP_MONITOR_OFFSET 0x00000400 /* i960 monitor interface */
#define FORE200E_CP_QUEUES_OFFSET 0x00004d40 /* cp resident queues */
/* PCA-200E memory layout */
#define PCA200E_IOSPACE_LENGTH 0x00200000
#define PCA200E_HCR_OFFSET 0x00100000 /* board control register */
#define PCA200E_IMR_OFFSET 0x00100004 /* host IRQ mask register */
#define PCA200E_PSR_OFFSET 0x00100008 /* PCI specific register */
/* PCA-200E host control register */
#define PCA200E_HCR_RESET (1<<0) /* read / write */
#define PCA200E_HCR_HOLD_LOCK (1<<1) /* read / write */
#define PCA200E_HCR_I960FAIL (1<<2) /* read */
#define PCA200E_HCR_INTRB (1<<2) /* write */
#define PCA200E_HCR_HOLD_ACK (1<<3) /* read */
#define PCA200E_HCR_INTRA (1<<3) /* write */
#define PCA200E_HCR_OUTFULL (1<<4) /* read */
#define PCA200E_HCR_CLRINTR (1<<4) /* write */
#define PCA200E_HCR_ESPHOLD (1<<5) /* read */
#define PCA200E_HCR_INFULL (1<<6) /* read */
#define PCA200E_HCR_TESTMODE (1<<7) /* read */
/* PCA-200E PCI bus interface regs (offsets in PCI config space) */
#define PCA200E_PCI_LATENCY 0x40 /* maximum slave latenty */
#define PCA200E_PCI_MASTER_CTRL 0x41 /* master control */
#define PCA200E_PCI_THRESHOLD 0x42 /* burst / continuous req threshold */
/* PBI master control register */
#define PCA200E_CTRL_DIS_CACHE_RD (1<<0) /* disable cache-line reads */
#define PCA200E_CTRL_DIS_WRT_INVAL (1<<1) /* disable writes and invalidates */
#define PCA200E_CTRL_2_CACHE_WRT_INVAL (1<<2) /* require 2 cache-lines for writes and invalidates */
#define PCA200E_CTRL_IGN_LAT_TIMER (1<<3) /* ignore the latency timer */
#define PCA200E_CTRL_ENA_CONT_REQ_MODE (1<<4) /* enable continuous request mode */
#define PCA200E_CTRL_LARGE_PCI_BURSTS (1<<5) /* force large PCI bus bursts */
#define PCA200E_CTRL_CONVERT_ENDIAN (1<<6) /* convert endianess of slave RAM accesses */
#define SBA200E_PROM_NAME "FORE,sba-200e" /* device name in openprom tree */
/* size of SBA-200E registers */
#define SBA200E_HCR_LENGTH 4
#define SBA200E_BSR_LENGTH 4
#define SBA200E_ISR_LENGTH 4
#define SBA200E_RAM_LENGTH 0x40000
/* SBA-200E SBUS burst transfer size register */
#define SBA200E_BSR_BURST4 0x04
#define SBA200E_BSR_BURST8 0x08
#define SBA200E_BSR_BURST16 0x10
/* SBA-200E host control register */
#define SBA200E_HCR_RESET (1<<0) /* read / write (sticky) */
#define SBA200E_HCR_HOLD_LOCK (1<<1) /* read / write (sticky) */
#define SBA200E_HCR_I960FAIL (1<<2) /* read */
#define SBA200E_HCR_I960SETINTR (1<<2) /* write */
#define SBA200E_HCR_OUTFULL (1<<3) /* read */
#define SBA200E_HCR_INTR_CLR (1<<3) /* write */
#define SBA200E_HCR_INTR_ENA (1<<4) /* read / write (sticky) */
#define SBA200E_HCR_ESPHOLD (1<<5) /* read */
#define SBA200E_HCR_INFULL (1<<6) /* read */
#define SBA200E_HCR_TESTMODE (1<<7) /* read */
#define SBA200E_HCR_INTR_REQ (1<<8) /* read */
#define SBA200E_HCR_STICKY (SBA200E_HCR_RESET | SBA200E_HCR_HOLD_LOCK | SBA200E_HCR_INTR_ENA)
#endif /* __KERNEL__ */
#endif /* _FORE200E_H */