linux_old1/drivers/misc/mei/main.c

816 lines
17 KiB
C
Raw Normal View History

staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
/*
*
* Intel Management Engine Interface (Intel MEI) Linux driver
* Copyright (c) 2003-2012, Intel Corporation.
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/aio.h>
#include <linux/pci.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/ioctl.h>
#include <linux/cdev.h>
#include <linux/sched.h>
#include <linux/uuid.h>
#include <linux/compat.h>
#include <linux/jiffies.h>
#include <linux/interrupt.h>
#include <linux/mei.h>
#include "mei_dev.h"
#include "client.h"
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
/**
* mei_open - the open function
*
* @inode: pointer to inode structure
* @file: pointer to file structure
*
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
* returns 0 on success, <0 on error
*/
static int mei_open(struct inode *inode, struct file *file)
{
struct mei_device *dev;
struct mei_cl *cl;
int err;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
dev = container_of(inode->i_cdev, struct mei_device, cdev);
if (!dev)
return -ENODEV;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
mutex_lock(&dev->device_lock);
cl = NULL;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
err = -ENODEV;
if (dev->dev_state != MEI_DEV_ENABLED) {
dev_dbg(&dev->pdev->dev, "dev_state != MEI_ENABLED dev_state = %s\n",
mei_dev_state_str(dev->dev_state));
goto err_unlock;
}
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
err = -ENOMEM;
cl = mei_cl_allocate(dev);
if (!cl)
goto err_unlock;
/* open_handle_count check is handled in the mei_cl_link */
err = mei_cl_link(cl, MEI_HOST_CLIENT_ID_ANY);
if (err)
goto err_unlock;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
file->private_data = cl;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
mutex_unlock(&dev->device_lock);
return nonseekable_open(inode, file);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
err_unlock:
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
mutex_unlock(&dev->device_lock);
kfree(cl);
return err;
}
/**
* mei_release - the release function
*
* @inode: pointer to inode structure
* @file: pointer to file structure
*
* returns 0 on success, <0 on error
*/
static int mei_release(struct inode *inode, struct file *file)
{
struct mei_cl *cl = file->private_data;
struct mei_cl_cb *cb;
struct mei_device *dev;
int rets = 0;
if (WARN_ON(!cl || !cl->dev))
return -ENODEV;
dev = cl->dev;
mutex_lock(&dev->device_lock);
if (cl == &dev->iamthif_cl) {
rets = mei_amthif_release(dev, file);
goto out;
}
if (cl->state == MEI_FILE_CONNECTED) {
cl->state = MEI_FILE_DISCONNECTING;
cl_dbg(dev, cl, "disconnecting\n");
rets = mei_cl_disconnect(cl);
}
mei_cl_flush_queues(cl);
cl_dbg(dev, cl, "removing\n");
mei_cl_unlink(cl);
/* free read cb */
cb = NULL;
if (cl->read_cb) {
cb = mei_cl_find_read_cb(cl);
/* Remove entry from read list */
if (cb)
list_del(&cb->list);
cb = cl->read_cb;
cl->read_cb = NULL;
}
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
file->private_data = NULL;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
mei_io_cb_free(cb);
kfree(cl);
out:
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
mutex_unlock(&dev->device_lock);
return rets;
}
/**
* mei_read - the read function.
*
* @file: pointer to file structure
* @ubuf: pointer to user buffer
* @length: buffer length
* @offset: data offset in buffer
*
* returns >=0 data length on success , <0 on error
*/
static ssize_t mei_read(struct file *file, char __user *ubuf,
size_t length, loff_t *offset)
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
{
struct mei_cl *cl = file->private_data;
struct mei_cl_cb *cb_pos = NULL;
struct mei_cl_cb *cb = NULL;
struct mei_device *dev;
int rets;
int err;
if (WARN_ON(!cl || !cl->dev))
return -ENODEV;
dev = cl->dev;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
mutex_lock(&dev->device_lock);
if (dev->dev_state != MEI_DEV_ENABLED) {
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
rets = -ENODEV;
goto out;
}
if (length == 0) {
rets = 0;
goto out;
}
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
if (cl == &dev->iamthif_cl) {
rets = mei_amthif_read(dev, file, ubuf, length, offset);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
goto out;
}
if (cl->read_cb) {
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
cb = cl->read_cb;
/* read what left */
if (cb->buf_idx > *offset)
goto copy_buffer;
/* offset is beyond buf_idx we have no more data return 0 */
if (cb->buf_idx > 0 && cb->buf_idx <= *offset) {
rets = 0;
goto free;
}
/* Offset needs to be cleaned for contiguous reads*/
if (cb->buf_idx == 0 && *offset > 0)
*offset = 0;
} else if (*offset > 0) {
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
*offset = 0;
}
err = mei_cl_read_start(cl, length);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
if (err && err != -EBUSY) {
dev_dbg(&dev->pdev->dev,
"mei start read failure with status = %d\n", err);
rets = err;
goto out;
}
if (MEI_READ_COMPLETE != cl->reading_state &&
!waitqueue_active(&cl->rx_wait)) {
if (file->f_flags & O_NONBLOCK) {
rets = -EAGAIN;
goto out;
}
mutex_unlock(&dev->device_lock);
if (wait_event_interruptible(cl->rx_wait,
MEI_READ_COMPLETE == cl->reading_state ||
mei_cl_is_transitioning(cl))) {
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
if (signal_pending(current))
return -EINTR;
return -ERESTARTSYS;
}
mutex_lock(&dev->device_lock);
if (mei_cl_is_transitioning(cl)) {
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
rets = -EBUSY;
goto out;
}
}
cb = cl->read_cb;
if (!cb) {
rets = -ENODEV;
goto out;
}
if (cl->reading_state != MEI_READ_COMPLETE) {
rets = 0;
goto out;
}
/* now copy the data to user space */
copy_buffer:
dev_dbg(&dev->pdev->dev, "buf.size = %d buf.idx= %ld\n",
cb->response_buffer.size, cb->buf_idx);
if (length == 0 || ubuf == NULL || *offset > cb->buf_idx) {
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
rets = -EMSGSIZE;
goto free;
}
/* length is being truncated to PAGE_SIZE,
* however buf_idx may point beyond that */
length = min_t(size_t, length, cb->buf_idx - *offset);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
if (copy_to_user(ubuf, cb->response_buffer.data + *offset, length)) {
dev_dbg(&dev->pdev->dev, "failed to copy data to userland\n");
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
rets = -EFAULT;
goto free;
}
rets = length;
*offset += length;
if ((unsigned long)*offset < cb->buf_idx)
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
goto out;
free:
cb_pos = mei_cl_find_read_cb(cl);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
/* Remove entry from read list */
if (cb_pos)
list_del(&cb_pos->list);
mei_io_cb_free(cb);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
cl->reading_state = MEI_IDLE;
cl->read_cb = NULL;
out:
dev_dbg(&dev->pdev->dev, "end mei read rets= %d\n", rets);
mutex_unlock(&dev->device_lock);
return rets;
}
/**
* mei_write - the write function.
*
* @file: pointer to file structure
* @ubuf: pointer to user buffer
* @length: buffer length
* @offset: data offset in buffer
*
* returns >=0 data length on success , <0 on error
*/
static ssize_t mei_write(struct file *file, const char __user *ubuf,
size_t length, loff_t *offset)
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
{
struct mei_cl *cl = file->private_data;
struct mei_me_client *me_cl;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
struct mei_cl_cb *write_cb = NULL;
struct mei_device *dev;
unsigned long timeout = 0;
int rets;
if (WARN_ON(!cl || !cl->dev))
return -ENODEV;
dev = cl->dev;
mutex_lock(&dev->device_lock);
if (dev->dev_state != MEI_DEV_ENABLED) {
rets = -ENODEV;
goto out;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
}
me_cl = mei_me_cl_by_uuid_id(dev, &cl->cl_uuid, cl->me_client_id);
if (!me_cl) {
rets = -ENOTTY;
goto out;
}
if (length == 0) {
rets = 0;
goto out;
}
if (length > me_cl->props.max_msg_length) {
rets = -EFBIG;
goto out;
}
if (cl->state != MEI_FILE_CONNECTED) {
dev_err(&dev->pdev->dev, "host client = %d, is not connected to ME client = %d",
cl->host_client_id, cl->me_client_id);
rets = -ENODEV;
goto out;
}
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
if (cl == &dev->iamthif_cl) {
write_cb = mei_amthif_find_read_list_entry(dev, file);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
if (write_cb) {
timeout = write_cb->read_time +
mei_secs_to_jiffies(MEI_IAMTHIF_READ_TIMER);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
if (time_after(jiffies, timeout) ||
cl->reading_state == MEI_READ_COMPLETE) {
*offset = 0;
list_del(&write_cb->list);
mei_io_cb_free(write_cb);
write_cb = NULL;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
}
}
}
/* free entry used in read */
if (cl->reading_state == MEI_READ_COMPLETE) {
*offset = 0;
write_cb = mei_cl_find_read_cb(cl);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
if (write_cb) {
list_del(&write_cb->list);
mei_io_cb_free(write_cb);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
write_cb = NULL;
cl->reading_state = MEI_IDLE;
cl->read_cb = NULL;
}
} else if (cl->reading_state == MEI_IDLE)
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
*offset = 0;
write_cb = mei_io_cb_init(cl, file);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
if (!write_cb) {
dev_err(&dev->pdev->dev, "write cb allocation failed\n");
rets = -ENOMEM;
goto out;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
}
rets = mei_io_cb_alloc_req_buf(write_cb, length);
if (rets)
goto out;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
rets = copy_from_user(write_cb->request_buffer.data, ubuf, length);
if (rets) {
dev_dbg(&dev->pdev->dev, "failed to copy data from userland\n");
rets = -EFAULT;
goto out;
}
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
if (cl == &dev->iamthif_cl) {
rets = mei_amthif_write(dev, write_cb);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
if (rets) {
dev_err(&dev->pdev->dev,
"amthif write failed with status = %d\n", rets);
goto out;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
}
mutex_unlock(&dev->device_lock);
return length;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
}
rets = mei_cl_write(cl, write_cb, false);
out:
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
mutex_unlock(&dev->device_lock);
if (rets < 0)
mei_io_cb_free(write_cb);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
return rets;
}
/**
* mei_ioctl_connect_client - the connect to fw client IOCTL function
*
* @dev: the device structure
* @data: IOCTL connect data, input and output parameters
* @file: private data of the file object
*
* Locking: called under "dev->device_lock" lock
*
* returns 0 on success, <0 on failure.
*/
static int mei_ioctl_connect_client(struct file *file,
struct mei_connect_client_data *data)
{
struct mei_device *dev;
struct mei_client *client;
struct mei_me_client *me_cl;
struct mei_cl *cl;
int rets;
cl = file->private_data;
if (WARN_ON(!cl || !cl->dev))
return -ENODEV;
dev = cl->dev;
if (dev->dev_state != MEI_DEV_ENABLED) {
rets = -ENODEV;
goto end;
}
if (cl->state != MEI_FILE_INITIALIZING &&
cl->state != MEI_FILE_DISCONNECTED) {
rets = -EBUSY;
goto end;
}
/* find ME client we're trying to connect to */
me_cl = mei_me_cl_by_uuid(dev, &data->in_client_uuid);
if (!me_cl || me_cl->props.fixed_address) {
dev_dbg(&dev->pdev->dev, "Cannot connect to FW Client UUID = %pUl\n",
&data->in_client_uuid);
rets = -ENOTTY;
goto end;
}
cl->me_client_id = me_cl->client_id;
cl->cl_uuid = me_cl->props.protocol_name;
dev_dbg(&dev->pdev->dev, "Connect to FW Client ID = %d\n",
cl->me_client_id);
dev_dbg(&dev->pdev->dev, "FW Client - Protocol Version = %d\n",
me_cl->props.protocol_version);
dev_dbg(&dev->pdev->dev, "FW Client - Max Msg Len = %d\n",
me_cl->props.max_msg_length);
/* if we're connecting to amthif client then we will use the
* existing connection
*/
if (uuid_le_cmp(data->in_client_uuid, mei_amthif_guid) == 0) {
dev_dbg(&dev->pdev->dev, "FW Client is amthi\n");
if (dev->iamthif_cl.state != MEI_FILE_CONNECTED) {
rets = -ENODEV;
goto end;
}
mei_cl_unlink(cl);
kfree(cl);
cl = NULL;
dev->iamthif_open_count++;
file->private_data = &dev->iamthif_cl;
client = &data->out_client_properties;
client->max_msg_length = me_cl->props.max_msg_length;
client->protocol_version = me_cl->props.protocol_version;
rets = dev->iamthif_cl.status;
goto end;
}
/* prepare the output buffer */
client = &data->out_client_properties;
client->max_msg_length = me_cl->props.max_msg_length;
client->protocol_version = me_cl->props.protocol_version;
dev_dbg(&dev->pdev->dev, "Can connect?\n");
rets = mei_cl_connect(cl, file);
end:
return rets;
}
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
/**
* mei_ioctl - the IOCTL function
*
* @file: pointer to file structure
* @cmd: ioctl command
* @data: pointer to mei message structure
*
* returns 0 on success , <0 on error
*/
static long mei_ioctl(struct file *file, unsigned int cmd, unsigned long data)
{
struct mei_device *dev;
struct mei_cl *cl = file->private_data;
struct mei_connect_client_data *connect_data = NULL;
int rets;
if (WARN_ON(!cl || !cl->dev))
return -ENODEV;
dev = cl->dev;
dev_dbg(&dev->pdev->dev, "IOCTL cmd = 0x%x", cmd);
mutex_lock(&dev->device_lock);
if (dev->dev_state != MEI_DEV_ENABLED) {
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
rets = -ENODEV;
goto out;
}
switch (cmd) {
case IOCTL_MEI_CONNECT_CLIENT:
dev_dbg(&dev->pdev->dev, ": IOCTL_MEI_CONNECT_CLIENT.\n");
connect_data = kzalloc(sizeof(struct mei_connect_client_data),
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
GFP_KERNEL);
if (!connect_data) {
rets = -ENOMEM;
goto out;
}
if (copy_from_user(connect_data, (char __user *)data,
sizeof(struct mei_connect_client_data))) {
dev_dbg(&dev->pdev->dev, "failed to copy data from userland\n");
rets = -EFAULT;
goto out;
}
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
rets = mei_ioctl_connect_client(file, connect_data);
if (rets)
goto out;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
/* if all is ok, copying the data back to user. */
if (copy_to_user((char __user *)data, connect_data,
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
sizeof(struct mei_connect_client_data))) {
dev_dbg(&dev->pdev->dev, "failed to copy data to userland\n");
rets = -EFAULT;
goto out;
}
break;
default:
dev_err(&dev->pdev->dev, ": unsupported ioctl %d.\n", cmd);
rets = -ENOIOCTLCMD;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
}
out:
kfree(connect_data);
mutex_unlock(&dev->device_lock);
return rets;
}
/**
* mei_compat_ioctl - the compat IOCTL function
*
* @file: pointer to file structure
* @cmd: ioctl command
* @data: pointer to mei message structure
*
* returns 0 on success , <0 on error
*/
#ifdef CONFIG_COMPAT
static long mei_compat_ioctl(struct file *file,
unsigned int cmd, unsigned long data)
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
{
return mei_ioctl(file, cmd, (unsigned long)compat_ptr(data));
}
#endif
/**
* mei_poll - the poll function
*
* @file: pointer to file structure
* @wait: pointer to poll_table structure
*
* returns poll mask
*/
static unsigned int mei_poll(struct file *file, poll_table *wait)
{
struct mei_cl *cl = file->private_data;
struct mei_device *dev;
unsigned int mask = 0;
if (WARN_ON(!cl || !cl->dev))
return POLLERR;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
dev = cl->dev;
mutex_lock(&dev->device_lock);
if (!mei_cl_is_connected(cl)) {
mask = POLLERR;
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
goto out;
}
mutex_unlock(&dev->device_lock);
if (cl == &dev->iamthif_cl)
return mei_amthif_poll(dev, file, wait);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
poll_wait(file, &cl->tx_wait, wait);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
mutex_lock(&dev->device_lock);
if (!mei_cl_is_connected(cl)) {
mask = POLLERR;
goto out;
}
mask |= (POLLIN | POLLRDNORM);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
out:
mutex_unlock(&dev->device_lock);
return mask;
}
/*
* file operations structure will be used for mei char device.
*/
static const struct file_operations mei_fops = {
.owner = THIS_MODULE,
.read = mei_read,
.unlocked_ioctl = mei_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = mei_compat_ioctl,
#endif
.open = mei_open,
.release = mei_release,
.write = mei_write,
.poll = mei_poll,
.llseek = no_llseek
};
static struct class *mei_class;
static dev_t mei_devt;
#define MEI_MAX_DEVS MINORMASK
static DEFINE_MUTEX(mei_minor_lock);
static DEFINE_IDR(mei_idr);
/**
* mei_minor_get - obtain next free device minor number
*
* @dev: device pointer
*
* returns allocated minor, or -ENOSPC if no free minor left
*/
static int mei_minor_get(struct mei_device *dev)
{
int ret;
mutex_lock(&mei_minor_lock);
ret = idr_alloc(&mei_idr, dev, 0, MEI_MAX_DEVS, GFP_KERNEL);
if (ret >= 0)
dev->minor = ret;
else if (ret == -ENOSPC)
dev_err(&dev->pdev->dev, "too many mei devices\n");
mutex_unlock(&mei_minor_lock);
return ret;
}
/**
* mei_minor_free - mark device minor number as free
*
* @dev: device pointer
*/
static void mei_minor_free(struct mei_device *dev)
{
mutex_lock(&mei_minor_lock);
idr_remove(&mei_idr, dev->minor);
mutex_unlock(&mei_minor_lock);
}
int mei_register(struct mei_device *dev, struct device *parent)
{
struct device *clsdev; /* class device */
int ret, devno;
ret = mei_minor_get(dev);
if (ret < 0)
return ret;
/* Fill in the data structures */
devno = MKDEV(MAJOR(mei_devt), dev->minor);
cdev_init(&dev->cdev, &mei_fops);
dev->cdev.owner = mei_fops.owner;
/* Add the device */
ret = cdev_add(&dev->cdev, devno, 1);
if (ret) {
dev_err(parent, "unable to add device %d:%d\n",
MAJOR(mei_devt), dev->minor);
goto err_dev_add;
}
clsdev = device_create(mei_class, parent, devno,
NULL, "mei%d", dev->minor);
if (IS_ERR(clsdev)) {
dev_err(parent, "unable to create device %d:%d\n",
MAJOR(mei_devt), dev->minor);
ret = PTR_ERR(clsdev);
goto err_dev_create;
}
ret = mei_dbgfs_register(dev, dev_name(clsdev));
if (ret) {
dev_err(clsdev, "cannot register debugfs ret = %d\n", ret);
goto err_dev_dbgfs;
}
return 0;
err_dev_dbgfs:
device_destroy(mei_class, devno);
err_dev_create:
cdev_del(&dev->cdev);
err_dev_add:
mei_minor_free(dev);
return ret;
}
EXPORT_SYMBOL_GPL(mei_register);
void mei_deregister(struct mei_device *dev)
{
int devno;
devno = dev->cdev.dev;
cdev_del(&dev->cdev);
mei_dbgfs_deregister(dev);
device_destroy(mei_class, devno);
mei_minor_free(dev);
}
EXPORT_SYMBOL_GPL(mei_deregister);
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00
static int __init mei_init(void)
{
int ret;
mei_class = class_create(THIS_MODULE, "mei");
if (IS_ERR(mei_class)) {
pr_err("couldn't create class\n");
ret = PTR_ERR(mei_class);
goto err;
}
ret = alloc_chrdev_region(&mei_devt, 0, MEI_MAX_DEVS, "mei");
if (ret < 0) {
pr_err("unable to allocate char dev region\n");
goto err_class;
}
ret = mei_cl_bus_init();
if (ret < 0) {
pr_err("unable to initialize bus\n");
goto err_chrdev;
}
return 0;
err_chrdev:
unregister_chrdev_region(mei_devt, MEI_MAX_DEVS);
err_class:
class_destroy(mei_class);
err:
return ret;
}
static void __exit mei_exit(void)
{
unregister_chrdev_region(mei_devt, MEI_MAX_DEVS);
class_destroy(mei_class);
mei_cl_bus_exit();
}
module_init(mei_init);
module_exit(mei_exit);
MODULE_AUTHOR("Intel Corporation");
MODULE_DESCRIPTION("Intel(R) Management Engine Interface");
MODULE_LICENSE("GPL v2");
staging/mei: PCI device and char driver support. contains module entries and PCI driver and char device definitions (using file_operations, pci_driver struts). The HW interface is exposed on PCI interface. PCI: The MEI HW resources are memory map 32 bit registers (Host and ME Status Registers and Data Registers) and interrupt (shared, with Intel GFX on some chipsets and USB2 controller on others). The device is part of the chipsets and cannot be hotplugged. The MEI device present is determined by BIOS configuration. Probe: The driver starts the init MEI flow, that is explained in the patch "MEI driver init flow" [06/10], then schedules a timer that handles timeouts and watchdog heartbeats. Remove: The driver closes all connections and stops the watchdog. The driver expose char device that supports: open, release, write, read, ioctl, poll. Open: Upon open the driver allocates HOST data structure on behalf of application which will resides in the file's private data and assign a host ID number which will identify messages between driver client instance and MEI client. The driver also checks readiness of the device. The number of simultaneously opened instances is limited to 253. (255 - (amthi + watchdog)) Release: In release the driver sends a Disconnect Command to ME feature and clean all the data structs. IOCTL: MEI adds new IOCTL: (IOCTL_MEI_CONNECT_CLIENT) The IOCTL links the current file descriptor to ME feature. This is done by sending MEI Bus command: 'hbm_client_connect_request' to the ME and waiting for an answer :'hbm_client_connect_response'. Upon answer reception the driver updates its and HOST data structures in file structure to indicate that the file descriptor is associated to ME feature. Each ME feature is represented by UUID which is given as an input parameter to the IOCTL, upon success connect command the IOCTL will return the ME feature properties. ME can reject CONNECT commands due to several reasons, most common are: Invalid UUID ME or feature does not exists in ME. No More Connection allowed to this is feature, usually only one connection is allowed. Write: Upon write, the driver splits the user data into several MEI messages up to 512 bytes each and sends it to the HW. If the user wants to write data to AMTHI ME feature then the drivers routes the messages through AMTHI queues. Read: In read the driver checks is a connection exists to current file descriptor and then wait until a data is available. Message might be received (by interrupt from ME) in multiple chunks. Only complete message is released to the application. Poll: Nothing special here. Waiting for see if we have data available for reading. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:41 +08:00