linux_old1/drivers/s390/scsi/zfcp_sysfs.c

624 lines
19 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* zfcp device driver
*
* sysfs attributes.
*
* Copyright IBM Corp. 2008, 2010
*/
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include "zfcp_ext.h"
#define ZFCP_DEV_ATTR(_feat, _name, _mode, _show, _store) \
struct device_attribute dev_attr_##_feat##_##_name = __ATTR(_name, _mode,\
_show, _store)
#define ZFCP_DEFINE_ATTR(_feat_def, _feat, _name, _format, _value) \
static ssize_t zfcp_sysfs_##_feat##_##_name##_show(struct device *dev, \
struct device_attribute *at,\
char *buf) \
{ \
struct _feat_def *_feat = container_of(dev, struct _feat_def, dev); \
\
return sprintf(buf, _format, _value); \
} \
static ZFCP_DEV_ATTR(_feat, _name, S_IRUGO, \
zfcp_sysfs_##_feat##_##_name##_show, NULL);
#define ZFCP_DEFINE_ATTR_CONST(_feat, _name, _format, _value) \
static ssize_t zfcp_sysfs_##_feat##_##_name##_show(struct device *dev, \
struct device_attribute *at,\
char *buf) \
{ \
return sprintf(buf, _format, _value); \
} \
static ZFCP_DEV_ATTR(_feat, _name, S_IRUGO, \
zfcp_sysfs_##_feat##_##_name##_show, NULL);
#define ZFCP_DEFINE_A_ATTR(_name, _format, _value) \
static ssize_t zfcp_sysfs_adapter_##_name##_show(struct device *dev, \
struct device_attribute *at,\
char *buf) \
{ \
struct ccw_device *cdev = to_ccwdev(dev); \
struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev); \
int i; \
\
if (!adapter) \
return -ENODEV; \
\
i = sprintf(buf, _format, _value); \
zfcp_ccw_adapter_put(adapter); \
return i; \
} \
static ZFCP_DEV_ATTR(adapter, _name, S_IRUGO, \
zfcp_sysfs_adapter_##_name##_show, NULL);
ZFCP_DEFINE_A_ATTR(status, "0x%08x\n", atomic_read(&adapter->status));
ZFCP_DEFINE_A_ATTR(peer_wwnn, "0x%016llx\n",
(unsigned long long) adapter->peer_wwnn);
ZFCP_DEFINE_A_ATTR(peer_wwpn, "0x%016llx\n",
(unsigned long long) adapter->peer_wwpn);
ZFCP_DEFINE_A_ATTR(peer_d_id, "0x%06x\n", adapter->peer_d_id);
ZFCP_DEFINE_A_ATTR(card_version, "0x%04x\n", adapter->hydra_version);
ZFCP_DEFINE_A_ATTR(lic_version, "0x%08x\n", adapter->fsf_lic_version);
ZFCP_DEFINE_A_ATTR(hardware_version, "0x%08x\n", adapter->hardware_version);
ZFCP_DEFINE_A_ATTR(in_recovery, "%d\n", (atomic_read(&adapter->status) &
ZFCP_STATUS_COMMON_ERP_INUSE) != 0);
ZFCP_DEFINE_ATTR(zfcp_port, port, status, "0x%08x\n",
atomic_read(&port->status));
ZFCP_DEFINE_ATTR(zfcp_port, port, in_recovery, "%d\n",
(atomic_read(&port->status) &
ZFCP_STATUS_COMMON_ERP_INUSE) != 0);
ZFCP_DEFINE_ATTR_CONST(port, access_denied, "%d\n", 0);
ZFCP_DEFINE_ATTR(zfcp_unit, unit, status, "0x%08x\n",
zfcp_unit_sdev_status(unit));
ZFCP_DEFINE_ATTR(zfcp_unit, unit, in_recovery, "%d\n",
(zfcp_unit_sdev_status(unit) &
ZFCP_STATUS_COMMON_ERP_INUSE) != 0);
ZFCP_DEFINE_ATTR(zfcp_unit, unit, access_denied, "%d\n",
(zfcp_unit_sdev_status(unit) &
ZFCP_STATUS_COMMON_ACCESS_DENIED) != 0);
ZFCP_DEFINE_ATTR_CONST(unit, access_shared, "%d\n", 0);
ZFCP_DEFINE_ATTR_CONST(unit, access_readonly, "%d\n", 0);
static ssize_t zfcp_sysfs_port_failed_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct zfcp_port *port = container_of(dev, struct zfcp_port, dev);
if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_ERP_FAILED)
return sprintf(buf, "1\n");
return sprintf(buf, "0\n");
}
static ssize_t zfcp_sysfs_port_failed_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct zfcp_port *port = container_of(dev, struct zfcp_port, dev);
unsigned long val;
if (kstrtoul(buf, 0, &val) || val != 0)
return -EINVAL;
zfcp_erp_set_port_status(port, ZFCP_STATUS_COMMON_RUNNING);
zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, "sypfai2");
zfcp_erp_wait(port->adapter);
return count;
}
static ZFCP_DEV_ATTR(port, failed, S_IWUSR | S_IRUGO,
zfcp_sysfs_port_failed_show,
zfcp_sysfs_port_failed_store);
static ssize_t zfcp_sysfs_unit_failed_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct zfcp_unit *unit = container_of(dev, struct zfcp_unit, dev);
struct scsi_device *sdev;
unsigned int status, failed = 1;
sdev = zfcp_unit_sdev(unit);
if (sdev) {
status = atomic_read(&sdev_to_zfcp(sdev)->status);
failed = status & ZFCP_STATUS_COMMON_ERP_FAILED ? 1 : 0;
scsi_device_put(sdev);
}
return sprintf(buf, "%d\n", failed);
}
static ssize_t zfcp_sysfs_unit_failed_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct zfcp_unit *unit = container_of(dev, struct zfcp_unit, dev);
unsigned long val;
struct scsi_device *sdev;
if (kstrtoul(buf, 0, &val) || val != 0)
return -EINVAL;
sdev = zfcp_unit_sdev(unit);
if (sdev) {
zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_RUNNING);
zfcp_erp_lun_reopen(sdev, ZFCP_STATUS_COMMON_ERP_FAILED,
"syufai2");
zfcp_erp_wait(unit->port->adapter);
} else
zfcp_unit_scsi_scan(unit);
return count;
}
static ZFCP_DEV_ATTR(unit, failed, S_IWUSR | S_IRUGO,
zfcp_sysfs_unit_failed_show,
zfcp_sysfs_unit_failed_store);
static ssize_t zfcp_sysfs_adapter_failed_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct ccw_device *cdev = to_ccwdev(dev);
struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev);
int i;
if (!adapter)
return -ENODEV;
if (atomic_read(&adapter->status) & ZFCP_STATUS_COMMON_ERP_FAILED)
i = sprintf(buf, "1\n");
else
i = sprintf(buf, "0\n");
zfcp_ccw_adapter_put(adapter);
return i;
}
static ssize_t zfcp_sysfs_adapter_failed_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct ccw_device *cdev = to_ccwdev(dev);
struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev);
unsigned long val;
int retval = 0;
if (!adapter)
return -ENODEV;
if (kstrtoul(buf, 0, &val) || val != 0) {
retval = -EINVAL;
goto out;
}
scsi: zfcp: support SCSI_ADAPTER_RESET via scsi_host sysfs attribute host_reset Make use of feature introduced with v3.2 commit 294436914454 ("[SCSI] scsi: Added support for adapter and firmware reset"). The common code interface was introduced for commit 95d31262b3c1 ("[SCSI] qla4xxx: Added support for adapter and firmware reset"). $ echo adapter > /sys/class/scsi_host/host<N>/host_reset Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : scshr_y SCSI sysfs host_reset yes LUN : 0xffffffffffffffff none (invalid) WWPN : 0x0000000000000000 none (invalid) D_ID : 0x00000000 none (invalid) Adapter status : 0x4500050b Port status : 0x00000000 none (invalid) LUN status : 0x00000000 none (invalid) Ready count : 0x00000001 Running count : 0x00000000 ERP want : 0x04 ZFCP_ERP_ACTION_REOPEN_ADAPTER ERP need : 0x04 ZFCP_ERP_ACTION_REOPEN_ADAPTER This is the common code equivalent to the zfcp-specific &dev_attr_adapter_failed.attr in zfcp_sysfs_adapter_attrs.attrs[]: $ echo 0 > /sys/bus/ccw/drivers/zfcp/<devbusid>/failed The unsupported case returns EOPNOTSUPP: $ echo firmware > /sys/class/scsi_host/host<N>/host_reset -bash: echo: write error: Operation not supported Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : scshr_n SCSI sysfs host_reset no Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0xffffffff none (invalid) SCSI LUN : 0xffffffff none (invalid) SCSI LUN high : 0xffffffff none (invalid) SCSI result : 0xffffffa1 -EOPNOTSUPP==-95 SCSI retries : 0xff none (invalid) SCSI allowed : 0xff none (invalid) SCSI scribble : 0xffffffffffffffff none (invalid) SCSI opcode : ffffffff ffffffff ffffffff ffffffff none (invalid) FCP rsp inf cod: 0xff none (invalid) FCP rsp IU : 00000000 00000000 00000000 00000000 none (invalid) 00000000 00000000 For any other invalid value, common code returns EINVAL without invoking our callback: $ echo foo > /sys/class/scsi_host/host<N>/host_reset -bash: echo: write error: Invalid argument Signed-off-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-18 01:15:03 +08:00
zfcp_erp_adapter_reset_sync(adapter, "syafai2");
out:
zfcp_ccw_adapter_put(adapter);
return retval ? retval : (ssize_t) count;
}
static ZFCP_DEV_ATTR(adapter, failed, S_IWUSR | S_IRUGO,
zfcp_sysfs_adapter_failed_show,
zfcp_sysfs_adapter_failed_store);
static ssize_t zfcp_sysfs_port_rescan_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct ccw_device *cdev = to_ccwdev(dev);
struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev);
if (!adapter)
return -ENODEV;
zfcp: auto port scan resiliency This patch improves the Fibre Channel port scan behaviour of the zfcp lldd. Without it the zfcp device driver may churn up the storage area network by excessive scanning and scan bursts, particularly in big virtual server environments, potentially resulting in interference of virtual servers and reduced availability of storage connectivity. The two main issues as to the zfcp device drivers automatic port scan in virtual server environments are frequency and simultaneity. On the one hand, there is no point in allowing lots of ports scans in a row. It makes sense, though, to make sure that a scan is conducted eventually if there has been any indication for potential SAN changes. On the other hand, lots of virtual servers receiving the same indication for a SAN change had better not attempt to conduct a scan instantly, that is, at the same time. Hence this patch has a two-fold approach for better port scanning: the introduction of a rate limit to amend frequency issues, and the introduction of a short random backoff to amend simultaneity issues. Both approaches boil down to deferred port scans, with delays comprising parts for both approaches. The new port scan behaviour is summarised best by: NEW: NEW: no_auto_port_rescan random rate flush backoff limit =wait adapter resume/thaw yes yes no yes* adapter online (user) no yes no yes* port rescan (user) no no no yes adapter recovery (user) yes yes yes no adapter recovery (other) yes yes yes no incoming ELS yes yes yes no incoming ELS lost yes yes yes no Implementation is straight-forward by converting an existing worker to a delayed worker. But care is needed whenever that worker is going to be flushed (in order to make sure work has been completed), since a flush operation cancels the timer set up for deferred execution (see * above). There is a small race window whenever a port scan work starts running up to the point in time of storing the time stamp for that port scan. The impact is negligible. Closing that gap isn't trivial, though, and would the destroy the beauty of a simple work-to-delayed-work conversion. Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-13 21:59:48 +08:00
/*
* Users wish is our command: immediately schedule and flush a
* worker to conduct a synchronous port scan, that is, neither
* a random delay nor a rate limit is applied here.
*/
queue_delayed_work(adapter->work_queue, &adapter->scan_work, 0);
flush_delayed_work(&adapter->scan_work);
zfcp_ccw_adapter_put(adapter);
return (ssize_t) count;
}
static ZFCP_DEV_ATTR(adapter, port_rescan, S_IWUSR, NULL,
zfcp_sysfs_port_rescan_store);
DEFINE_MUTEX(zfcp_sysfs_port_units_mutex);
static ssize_t zfcp_sysfs_port_remove_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct ccw_device *cdev = to_ccwdev(dev);
struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev);
struct zfcp_port *port;
u64 wwpn;
int retval = -EINVAL;
if (!adapter)
return -ENODEV;
if (kstrtoull(buf, 0, (unsigned long long *) &wwpn))
goto out;
port = zfcp_get_port_by_wwpn(adapter, wwpn);
if (!port)
goto out;
else
retval = 0;
mutex_lock(&zfcp_sysfs_port_units_mutex);
if (atomic_read(&port->units) > 0) {
retval = -EBUSY;
mutex_unlock(&zfcp_sysfs_port_units_mutex);
goto out;
}
/* port is about to be removed, so no more unit_add */
atomic_set(&port->units, -1);
mutex_unlock(&zfcp_sysfs_port_units_mutex);
write_lock_irq(&adapter->port_list_lock);
list_del(&port->list);
write_unlock_irq(&adapter->port_list_lock);
put_device(&port->dev);
zfcp_erp_port_shutdown(port, 0, "syprs_1");
device_unregister(&port->dev);
out:
zfcp_ccw_adapter_put(adapter);
return retval ? retval : (ssize_t) count;
}
static ZFCP_DEV_ATTR(adapter, port_remove, S_IWUSR, NULL,
zfcp_sysfs_port_remove_store);
static struct attribute *zfcp_adapter_attrs[] = {
&dev_attr_adapter_failed.attr,
&dev_attr_adapter_in_recovery.attr,
&dev_attr_adapter_port_remove.attr,
&dev_attr_adapter_port_rescan.attr,
&dev_attr_adapter_peer_wwnn.attr,
&dev_attr_adapter_peer_wwpn.attr,
&dev_attr_adapter_peer_d_id.attr,
&dev_attr_adapter_card_version.attr,
&dev_attr_adapter_lic_version.attr,
&dev_attr_adapter_status.attr,
&dev_attr_adapter_hardware_version.attr,
NULL
};
struct attribute_group zfcp_sysfs_adapter_attrs = {
.attrs = zfcp_adapter_attrs,
};
static ssize_t zfcp_sysfs_unit_add_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct zfcp_port *port = container_of(dev, struct zfcp_port, dev);
u64 fcp_lun;
int retval;
if (kstrtoull(buf, 0, (unsigned long long *) &fcp_lun))
return -EINVAL;
retval = zfcp_unit_add(port, fcp_lun);
if (retval)
return retval;
return count;
}
static DEVICE_ATTR(unit_add, S_IWUSR, NULL, zfcp_sysfs_unit_add_store);
static ssize_t zfcp_sysfs_unit_remove_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct zfcp_port *port = container_of(dev, struct zfcp_port, dev);
u64 fcp_lun;
if (kstrtoull(buf, 0, (unsigned long long *) &fcp_lun))
return -EINVAL;
if (zfcp_unit_remove(port, fcp_lun))
return -EINVAL;
return count;
}
static DEVICE_ATTR(unit_remove, S_IWUSR, NULL, zfcp_sysfs_unit_remove_store);
static struct attribute *zfcp_port_attrs[] = {
&dev_attr_unit_add.attr,
&dev_attr_unit_remove.attr,
&dev_attr_port_failed.attr,
&dev_attr_port_in_recovery.attr,
&dev_attr_port_status.attr,
&dev_attr_port_access_denied.attr,
NULL
};
static struct attribute_group zfcp_port_attr_group = {
.attrs = zfcp_port_attrs,
};
const struct attribute_group *zfcp_port_attr_groups[] = {
&zfcp_port_attr_group,
NULL,
};
static struct attribute *zfcp_unit_attrs[] = {
&dev_attr_unit_failed.attr,
&dev_attr_unit_in_recovery.attr,
&dev_attr_unit_status.attr,
&dev_attr_unit_access_denied.attr,
&dev_attr_unit_access_shared.attr,
&dev_attr_unit_access_readonly.attr,
NULL
};
static struct attribute_group zfcp_unit_attr_group = {
.attrs = zfcp_unit_attrs,
};
const struct attribute_group *zfcp_unit_attr_groups[] = {
&zfcp_unit_attr_group,
NULL,
};
#define ZFCP_DEFINE_LATENCY_ATTR(_name) \
static ssize_t \
zfcp_sysfs_unit_##_name##_latency_show(struct device *dev, \
struct device_attribute *attr, \
char *buf) { \
struct scsi_device *sdev = to_scsi_device(dev); \
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev); \
struct zfcp_latencies *lat = &zfcp_sdev->latencies; \
struct zfcp_adapter *adapter = zfcp_sdev->port->adapter; \
unsigned long long fsum, fmin, fmax, csum, cmin, cmax, cc; \
\
spin_lock_bh(&lat->lock); \
fsum = lat->_name.fabric.sum * adapter->timer_ticks; \
fmin = lat->_name.fabric.min * adapter->timer_ticks; \
fmax = lat->_name.fabric.max * adapter->timer_ticks; \
csum = lat->_name.channel.sum * adapter->timer_ticks; \
cmin = lat->_name.channel.min * adapter->timer_ticks; \
cmax = lat->_name.channel.max * adapter->timer_ticks; \
cc = lat->_name.counter; \
spin_unlock_bh(&lat->lock); \
\
do_div(fsum, 1000); \
do_div(fmin, 1000); \
do_div(fmax, 1000); \
do_div(csum, 1000); \
do_div(cmin, 1000); \
do_div(cmax, 1000); \
\
return sprintf(buf, "%llu %llu %llu %llu %llu %llu %llu\n", \
fmin, fmax, fsum, cmin, cmax, csum, cc); \
} \
static ssize_t \
zfcp_sysfs_unit_##_name##_latency_store(struct device *dev, \
struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
struct scsi_device *sdev = to_scsi_device(dev); \
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev); \
struct zfcp_latencies *lat = &zfcp_sdev->latencies; \
unsigned long flags; \
\
spin_lock_irqsave(&lat->lock, flags); \
lat->_name.fabric.sum = 0; \
lat->_name.fabric.min = 0xFFFFFFFF; \
lat->_name.fabric.max = 0; \
lat->_name.channel.sum = 0; \
lat->_name.channel.min = 0xFFFFFFFF; \
lat->_name.channel.max = 0; \
lat->_name.counter = 0; \
spin_unlock_irqrestore(&lat->lock, flags); \
\
return (ssize_t) count; \
} \
static DEVICE_ATTR(_name##_latency, S_IWUSR | S_IRUGO, \
zfcp_sysfs_unit_##_name##_latency_show, \
zfcp_sysfs_unit_##_name##_latency_store);
ZFCP_DEFINE_LATENCY_ATTR(read);
ZFCP_DEFINE_LATENCY_ATTR(write);
ZFCP_DEFINE_LATENCY_ATTR(cmd);
#define ZFCP_DEFINE_SCSI_ATTR(_name, _format, _value) \
static ssize_t zfcp_sysfs_scsi_##_name##_show(struct device *dev, \
struct device_attribute *attr,\
char *buf) \
{ \
struct scsi_device *sdev = to_scsi_device(dev); \
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev); \
\
return sprintf(buf, _format, _value); \
} \
static DEVICE_ATTR(_name, S_IRUGO, zfcp_sysfs_scsi_##_name##_show, NULL);
ZFCP_DEFINE_SCSI_ATTR(hba_id, "%s\n",
zfcp: bring back unit sysfs attributes for automatic LUN scan Through sysfs attributes, zfcp unit objects provide a trigger for manual LUN recovery and export information for problem determination. With commit f8210e34887e1feb977a9b6b8caa086855af40c9 "[SCSI] zfcp: Allow midlayer to scan for LUNs when running in NPIV mode" and when attaching SCSI devices through this new optional method, no more zfcp unit objects are allocated for such SCSI devices. Hence, the above-mentioned trigger and information were missing. The information and context is located in SCSI transport device data since b62a8d9b45b971a67a0f8413338c230e3117dff5 "[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit" 57c237731b92fadc7d44824276313ec330b1989b "[SCSI] zfcp: Add zfcp private struct as SCSI device driver data" Hence, introduce the trigger and the information unconditionally for all SCSI devices attached through zfcp. We prefix the attribute names with 'zfcp_' to prevent collisions and to avoid mix-ups such as with the common 'state' attribute. Since some of the new attribute views do not need zfcp_port in the ZFCP_DEFINE_SCSI_ATTR helper macro, remove zfcp_port to avoid compiler warnings on unused variable. It's easy to open code the conversion from zfcp_scsi_dev to zfcp_port for the two already existing attributes hba_id and wwpn. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-13 21:59:47 +08:00
dev_name(&zfcp_sdev->port->adapter->ccw_device->dev));
ZFCP_DEFINE_SCSI_ATTR(wwpn, "0x%016llx\n",
zfcp: bring back unit sysfs attributes for automatic LUN scan Through sysfs attributes, zfcp unit objects provide a trigger for manual LUN recovery and export information for problem determination. With commit f8210e34887e1feb977a9b6b8caa086855af40c9 "[SCSI] zfcp: Allow midlayer to scan for LUNs when running in NPIV mode" and when attaching SCSI devices through this new optional method, no more zfcp unit objects are allocated for such SCSI devices. Hence, the above-mentioned trigger and information were missing. The information and context is located in SCSI transport device data since b62a8d9b45b971a67a0f8413338c230e3117dff5 "[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit" 57c237731b92fadc7d44824276313ec330b1989b "[SCSI] zfcp: Add zfcp private struct as SCSI device driver data" Hence, introduce the trigger and the information unconditionally for all SCSI devices attached through zfcp. We prefix the attribute names with 'zfcp_' to prevent collisions and to avoid mix-ups such as with the common 'state' attribute. Since some of the new attribute views do not need zfcp_port in the ZFCP_DEFINE_SCSI_ATTR helper macro, remove zfcp_port to avoid compiler warnings on unused variable. It's easy to open code the conversion from zfcp_scsi_dev to zfcp_port for the two already existing attributes hba_id and wwpn. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-13 21:59:47 +08:00
(unsigned long long) zfcp_sdev->port->wwpn);
static ssize_t zfcp_sysfs_scsi_fcp_lun_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct scsi_device *sdev = to_scsi_device(dev);
return sprintf(buf, "0x%016llx\n", zfcp_scsi_dev_lun(sdev));
}
static DEVICE_ATTR(fcp_lun, S_IRUGO, zfcp_sysfs_scsi_fcp_lun_show, NULL);
zfcp: bring back unit sysfs attributes for automatic LUN scan Through sysfs attributes, zfcp unit objects provide a trigger for manual LUN recovery and export information for problem determination. With commit f8210e34887e1feb977a9b6b8caa086855af40c9 "[SCSI] zfcp: Allow midlayer to scan for LUNs when running in NPIV mode" and when attaching SCSI devices through this new optional method, no more zfcp unit objects are allocated for such SCSI devices. Hence, the above-mentioned trigger and information were missing. The information and context is located in SCSI transport device data since b62a8d9b45b971a67a0f8413338c230e3117dff5 "[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit" 57c237731b92fadc7d44824276313ec330b1989b "[SCSI] zfcp: Add zfcp private struct as SCSI device driver data" Hence, introduce the trigger and the information unconditionally for all SCSI devices attached through zfcp. We prefix the attribute names with 'zfcp_' to prevent collisions and to avoid mix-ups such as with the common 'state' attribute. Since some of the new attribute views do not need zfcp_port in the ZFCP_DEFINE_SCSI_ATTR helper macro, remove zfcp_port to avoid compiler warnings on unused variable. It's easy to open code the conversion from zfcp_scsi_dev to zfcp_port for the two already existing attributes hba_id and wwpn. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-13 21:59:47 +08:00
ZFCP_DEFINE_SCSI_ATTR(zfcp_access_denied, "%d\n",
(atomic_read(&zfcp_sdev->status) &
ZFCP_STATUS_COMMON_ACCESS_DENIED) != 0);
static ssize_t zfcp_sysfs_scsi_zfcp_failed_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct scsi_device *sdev = to_scsi_device(dev);
unsigned int status = atomic_read(&sdev_to_zfcp(sdev)->status);
unsigned int failed = status & ZFCP_STATUS_COMMON_ERP_FAILED ? 1 : 0;
return sprintf(buf, "%d\n", failed);
}
static ssize_t zfcp_sysfs_scsi_zfcp_failed_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct scsi_device *sdev = to_scsi_device(dev);
unsigned long val;
if (kstrtoul(buf, 0, &val) || val != 0)
return -EINVAL;
zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_RUNNING);
zfcp_erp_lun_reopen(sdev, ZFCP_STATUS_COMMON_ERP_FAILED,
"syufai3");
zfcp_erp_wait(sdev_to_zfcp(sdev)->port->adapter);
return count;
}
static DEVICE_ATTR(zfcp_failed, S_IWUSR | S_IRUGO,
zfcp_sysfs_scsi_zfcp_failed_show,
zfcp_sysfs_scsi_zfcp_failed_store);
ZFCP_DEFINE_SCSI_ATTR(zfcp_in_recovery, "%d\n",
(atomic_read(&zfcp_sdev->status) &
ZFCP_STATUS_COMMON_ERP_INUSE) != 0);
ZFCP_DEFINE_SCSI_ATTR(zfcp_status, "0x%08x\n",
atomic_read(&zfcp_sdev->status));
struct device_attribute *zfcp_sysfs_sdev_attrs[] = {
&dev_attr_fcp_lun,
&dev_attr_wwpn,
&dev_attr_hba_id,
&dev_attr_read_latency,
&dev_attr_write_latency,
&dev_attr_cmd_latency,
zfcp: bring back unit sysfs attributes for automatic LUN scan Through sysfs attributes, zfcp unit objects provide a trigger for manual LUN recovery and export information for problem determination. With commit f8210e34887e1feb977a9b6b8caa086855af40c9 "[SCSI] zfcp: Allow midlayer to scan for LUNs when running in NPIV mode" and when attaching SCSI devices through this new optional method, no more zfcp unit objects are allocated for such SCSI devices. Hence, the above-mentioned trigger and information were missing. The information and context is located in SCSI transport device data since b62a8d9b45b971a67a0f8413338c230e3117dff5 "[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit" 57c237731b92fadc7d44824276313ec330b1989b "[SCSI] zfcp: Add zfcp private struct as SCSI device driver data" Hence, introduce the trigger and the information unconditionally for all SCSI devices attached through zfcp. We prefix the attribute names with 'zfcp_' to prevent collisions and to avoid mix-ups such as with the common 'state' attribute. Since some of the new attribute views do not need zfcp_port in the ZFCP_DEFINE_SCSI_ATTR helper macro, remove zfcp_port to avoid compiler warnings on unused variable. It's easy to open code the conversion from zfcp_scsi_dev to zfcp_port for the two already existing attributes hba_id and wwpn. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-13 21:59:47 +08:00
&dev_attr_zfcp_access_denied,
&dev_attr_zfcp_failed,
&dev_attr_zfcp_in_recovery,
&dev_attr_zfcp_status,
NULL
};
static ssize_t zfcp_sysfs_adapter_util_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *scsi_host = dev_to_shost(dev);
struct fsf_qtcb_bottom_port *qtcb_port;
struct zfcp_adapter *adapter;
int retval;
adapter = (struct zfcp_adapter *) scsi_host->hostdata[0];
if (!(adapter->adapter_features & FSF_FEATURE_MEASUREMENT_DATA))
return -EOPNOTSUPP;
qtcb_port = kzalloc(sizeof(struct fsf_qtcb_bottom_port), GFP_KERNEL);
if (!qtcb_port)
return -ENOMEM;
retval = zfcp_fsf_exchange_port_data_sync(adapter->qdio, qtcb_port);
if (!retval)
retval = sprintf(buf, "%u %u %u\n", qtcb_port->cp_util,
qtcb_port->cb_util, qtcb_port->a_util);
kfree(qtcb_port);
return retval;
}
static DEVICE_ATTR(utilization, S_IRUGO, zfcp_sysfs_adapter_util_show, NULL);
static int zfcp_sysfs_adapter_ex_config(struct device *dev,
struct fsf_statistics_info *stat_inf)
{
struct Scsi_Host *scsi_host = dev_to_shost(dev);
struct fsf_qtcb_bottom_config *qtcb_config;
struct zfcp_adapter *adapter;
int retval;
adapter = (struct zfcp_adapter *) scsi_host->hostdata[0];
if (!(adapter->adapter_features & FSF_FEATURE_MEASUREMENT_DATA))
return -EOPNOTSUPP;
qtcb_config = kzalloc(sizeof(struct fsf_qtcb_bottom_config),
GFP_KERNEL);
if (!qtcb_config)
return -ENOMEM;
retval = zfcp_fsf_exchange_config_data_sync(adapter->qdio, qtcb_config);
if (!retval)
*stat_inf = qtcb_config->stat_info;
kfree(qtcb_config);
return retval;
}
#define ZFCP_SHOST_ATTR(_name, _format, _arg...) \
static ssize_t zfcp_sysfs_adapter_##_name##_show(struct device *dev, \
struct device_attribute *attr,\
char *buf) \
{ \
struct fsf_statistics_info stat_info; \
int retval; \
\
retval = zfcp_sysfs_adapter_ex_config(dev, &stat_info); \
if (retval) \
return retval; \
\
return sprintf(buf, _format, ## _arg); \
} \
static DEVICE_ATTR(_name, S_IRUGO, zfcp_sysfs_adapter_##_name##_show, NULL);
ZFCP_SHOST_ATTR(requests, "%llu %llu %llu\n",
(unsigned long long) stat_info.input_req,
(unsigned long long) stat_info.output_req,
(unsigned long long) stat_info.control_req);
ZFCP_SHOST_ATTR(megabytes, "%llu %llu\n",
(unsigned long long) stat_info.input_mb,
(unsigned long long) stat_info.output_mb);
ZFCP_SHOST_ATTR(seconds_active, "%llu\n",
(unsigned long long) stat_info.seconds_act);
static ssize_t zfcp_sysfs_adapter_q_full_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *scsi_host = class_to_shost(dev);
struct zfcp_qdio *qdio =
((struct zfcp_adapter *) scsi_host->hostdata[0])->qdio;
u64 util;
spin_lock_bh(&qdio->stat_lock);
util = qdio->req_q_util;
spin_unlock_bh(&qdio->stat_lock);
return sprintf(buf, "%d %llu\n", atomic_read(&qdio->req_q_full),
(unsigned long long)util);
}
static DEVICE_ATTR(queue_full, S_IRUGO, zfcp_sysfs_adapter_q_full_show, NULL);
struct device_attribute *zfcp_sysfs_shost_attrs[] = {
&dev_attr_utilization,
&dev_attr_requests,
&dev_attr_megabytes,
&dev_attr_seconds_active,
&dev_attr_queue_full,
NULL
};