linux_old1/kernel/irq/pm.c

196 lines
4.5 KiB
C
Raw Normal View History

/*
* linux/kernel/irq/pm.c
*
* Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
*
* This file contains power management functions related to interrupts.
*/
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/syscore_ops.h>
#include "internals.h"
/*
* Called from __setup_irq() with desc->lock held after @action has
* been installed in the action chain.
*/
void irq_pm_install_action(struct irq_desc *desc, struct irqaction *action)
{
desc->nr_actions++;
if (action->flags & IRQF_FORCE_RESUME)
desc->force_resume_depth++;
WARN_ON_ONCE(desc->force_resume_depth &&
desc->force_resume_depth != desc->nr_actions);
if (action->flags & IRQF_NO_SUSPEND)
desc->no_suspend_depth++;
WARN_ON_ONCE(desc->no_suspend_depth &&
desc->no_suspend_depth != desc->nr_actions);
}
/*
* Called from __free_irq() with desc->lock held after @action has
* been removed from the action chain.
*/
void irq_pm_remove_action(struct irq_desc *desc, struct irqaction *action)
{
desc->nr_actions--;
if (action->flags & IRQF_FORCE_RESUME)
desc->force_resume_depth--;
if (action->flags & IRQF_NO_SUSPEND)
desc->no_suspend_depth--;
}
static void suspend_device_irq(struct irq_desc *desc, int irq)
{
if (!desc->action || desc->no_suspend_depth)
return;
desc->istate |= IRQS_SUSPENDED;
__disable_irq(desc, irq);
}
/**
* suspend_device_irqs - disable all currently enabled interrupt lines
*
* During system-wide suspend or hibernation device drivers need to be
* prevented from receiving interrupts and this function is provided
* for this purpose.
*
* So we disable all interrupts and mark them IRQS_SUSPENDED except
* for those which are unused and those which are marked as not
* suspendable via an interrupt request with the flag IRQF_NO_SUSPEND
* set.
*/
void suspend_device_irqs(void)
{
struct irq_desc *desc;
int irq;
for_each_irq_desc(irq, desc) {
unsigned long flags;
raw_spin_lock_irqsave(&desc->lock, flags);
suspend_device_irq(desc, irq);
raw_spin_unlock_irqrestore(&desc->lock, flags);
}
for_each_irq_desc(irq, desc)
if (desc->istate & IRQS_SUSPENDED)
synchronize_irq(irq);
}
EXPORT_SYMBOL_GPL(suspend_device_irqs);
static void resume_irq(struct irq_desc *desc, int irq)
{
if (desc->istate & IRQS_SUSPENDED)
goto resume;
/* Force resume the interrupt? */
if (!desc->force_resume_depth)
return;
/* Pretend that it got disabled ! */
desc->depth++;
resume:
desc->istate &= ~IRQS_SUSPENDED;
__enable_irq(desc, irq);
}
static void resume_irqs(bool want_early)
{
struct irq_desc *desc;
int irq;
for_each_irq_desc(irq, desc) {
unsigned long flags;
bool is_early = desc->action &&
desc->action->flags & IRQF_EARLY_RESUME;
if (!is_early && want_early)
continue;
raw_spin_lock_irqsave(&desc->lock, flags);
resume_irq(desc, irq);
raw_spin_unlock_irqrestore(&desc->lock, flags);
}
}
/**
* irq_pm_syscore_ops - enable interrupt lines early
*
* Enable all interrupt lines with %IRQF_EARLY_RESUME set.
*/
static void irq_pm_syscore_resume(void)
{
resume_irqs(true);
}
static struct syscore_ops irq_pm_syscore_ops = {
.resume = irq_pm_syscore_resume,
};
static int __init irq_pm_init_ops(void)
{
register_syscore_ops(&irq_pm_syscore_ops);
return 0;
}
device_initcall(irq_pm_init_ops);
/**
* resume_device_irqs - enable interrupt lines disabled by suspend_device_irqs()
*
* Enable all non-%IRQF_EARLY_RESUME interrupt lines previously
* disabled by suspend_device_irqs() that have the IRQS_SUSPENDED flag
* set as well as those with %IRQF_FORCE_RESUME.
*/
void resume_device_irqs(void)
{
resume_irqs(false);
}
EXPORT_SYMBOL_GPL(resume_device_irqs);
/**
* check_wakeup_irqs - check if any wake-up interrupts are pending
*/
int check_wakeup_irqs(void)
{
struct irq_desc *desc;
int irq;
genirq: Add chip flag to force mask on suspend On suspend we disable all interrupts in the core code, but this does not mask the interrupt line in the default implementation as we use a lazy disable approach. That means we mark the interrupt disabled, but leave the hardware unmasked. That's an optimization because we avoid the hardware access for the common case where no interrupt happens after we marked it disabled. If an interrupt happens, then the interrupt flow handler masks the line at the hardware level and marks it pending. Suspend makes use of this delayed disable as it "disables" all interrupts when preparing the suspend transition. Right before the system goes into hardware suspend state it checks whether one of the interrupts which is marked as a wakeup interrupt came in after disabling it. Most interrupt chips have a separate register which selects the interrupts which can wake up the system from suspend, so we don't have to mask any on the non wakeup interrupts. But now we have to deal with brilliant designed hardware which lacks such a wakeup configuration facility. For such hardware it's necessary to mask all non wakeup interrupts before going into suspend in order to avoid the wakeup from random interrupts. Rather than working around this in the affected interrupt chip implementations we can solve this elegant in the core code itself. Add a flag IRQCHIP_MASK_ON_SUSPEND which can be set by the irq chip implementation to indicate, that the interrupts which are not selected as wakeup sources must be masked in the suspend path. Mask them in the loop which checks the wakeup interrupts pending flag. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> LKML-Reference: <alpine.LFD.2.00.1103112112310.2787@localhost6.localdomain6>
2011-03-12 04:22:14 +08:00
for_each_irq_desc(irq, desc) {
/*
* Only interrupts which are marked as wakeup source
* and have not been disabled before the suspend check
* can abort suspend.
*/
genirq: Add chip flag to force mask on suspend On suspend we disable all interrupts in the core code, but this does not mask the interrupt line in the default implementation as we use a lazy disable approach. That means we mark the interrupt disabled, but leave the hardware unmasked. That's an optimization because we avoid the hardware access for the common case where no interrupt happens after we marked it disabled. If an interrupt happens, then the interrupt flow handler masks the line at the hardware level and marks it pending. Suspend makes use of this delayed disable as it "disables" all interrupts when preparing the suspend transition. Right before the system goes into hardware suspend state it checks whether one of the interrupts which is marked as a wakeup interrupt came in after disabling it. Most interrupt chips have a separate register which selects the interrupts which can wake up the system from suspend, so we don't have to mask any on the non wakeup interrupts. But now we have to deal with brilliant designed hardware which lacks such a wakeup configuration facility. For such hardware it's necessary to mask all non wakeup interrupts before going into suspend in order to avoid the wakeup from random interrupts. Rather than working around this in the affected interrupt chip implementations we can solve this elegant in the core code itself. Add a flag IRQCHIP_MASK_ON_SUSPEND which can be set by the irq chip implementation to indicate, that the interrupts which are not selected as wakeup sources must be masked in the suspend path. Mask them in the loop which checks the wakeup interrupts pending flag. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> LKML-Reference: <alpine.LFD.2.00.1103112112310.2787@localhost6.localdomain6>
2011-03-12 04:22:14 +08:00
if (irqd_is_wakeup_set(&desc->irq_data)) {
if (desc->depth == 1 && desc->istate & IRQS_PENDING)
genirq: Add chip flag to force mask on suspend On suspend we disable all interrupts in the core code, but this does not mask the interrupt line in the default implementation as we use a lazy disable approach. That means we mark the interrupt disabled, but leave the hardware unmasked. That's an optimization because we avoid the hardware access for the common case where no interrupt happens after we marked it disabled. If an interrupt happens, then the interrupt flow handler masks the line at the hardware level and marks it pending. Suspend makes use of this delayed disable as it "disables" all interrupts when preparing the suspend transition. Right before the system goes into hardware suspend state it checks whether one of the interrupts which is marked as a wakeup interrupt came in after disabling it. Most interrupt chips have a separate register which selects the interrupts which can wake up the system from suspend, so we don't have to mask any on the non wakeup interrupts. But now we have to deal with brilliant designed hardware which lacks such a wakeup configuration facility. For such hardware it's necessary to mask all non wakeup interrupts before going into suspend in order to avoid the wakeup from random interrupts. Rather than working around this in the affected interrupt chip implementations we can solve this elegant in the core code itself. Add a flag IRQCHIP_MASK_ON_SUSPEND which can be set by the irq chip implementation to indicate, that the interrupts which are not selected as wakeup sources must be masked in the suspend path. Mask them in the loop which checks the wakeup interrupts pending flag. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> LKML-Reference: <alpine.LFD.2.00.1103112112310.2787@localhost6.localdomain6>
2011-03-12 04:22:14 +08:00
return -EBUSY;
continue;
}
/*
* Check the non wakeup interrupts whether they need
* to be masked before finally going into suspend
* state. That's for hardware which has no wakeup
* source configuration facility. The chip
* implementation indicates that with
* IRQCHIP_MASK_ON_SUSPEND.
*/
if (desc->istate & IRQS_SUSPENDED &&
irq_desc_get_chip(desc)->flags & IRQCHIP_MASK_ON_SUSPEND)
mask_irq(desc);
}
return 0;
}