linux_old1/drivers/acpi/wakeup.c

99 lines
2.7 KiB
C
Raw Normal View History

/*
* wakeup.c - support wakeup devices
* Copyright (C) 2004 Li Shaohua <shaohua.li@intel.com>
*/
#include <linux/init.h>
#include <linux/acpi.h>
#include <acpi/acpi_drivers.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include "internal.h"
#include "sleep.h"
/*
* We didn't lock acpi_device_lock in the file, because it invokes oops in
* suspend/resume and isn't really required as this is called in S-state. At
* that time, there is no device hotplug
**/
#define _COMPONENT ACPI_SYSTEM_COMPONENT
ACPI_MODULE_NAME("wakeup_devices")
/**
* acpi_enable_wakeup_devices - Enable wake-up device GPEs.
* @sleep_state: ACPI system sleep state.
*
* Enable wakeup device power of devices with the state.enable flag set and set
* the wakeup enable mask bits in the GPE registers that correspond to wakeup
* devices.
*/
void acpi_enable_wakeup_devices(u8 sleep_state)
{
struct list_head *node, *next;
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
PCI ACPI: Rework PCI handling of wake-up * Introduce function acpi_pm_device_sleep_wake() for enabling and disabling the system wake-up capability of devices that are power manageable by ACPI. * Introduce function acpi_bus_can_wakeup() allowing other (dependent) subsystems to check if ACPI is able to enable the system wake-up capability of given device. * Introduce callback .sleep_wake() in struct pci_platform_pm_ops and for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake(). * Introduce callback .can_wakeup() in struct pci_platform_pm_ops and for the ACPI 'driver' make it use acpi_bus_can_wakeup(). * Move the PME# handlig code out of pci_enable_wake() and split it into two functions, pci_pme_capable() and pci_pme_active(), allowing the caller to check if given device is capable of generating PME# from given power state and to enable/disable the device's PME# functionality, respectively. * Modify pci_enable_wake() to use the new ACPI callbacks and the new PME#-related functions. * Drop the generic .platform_enable_wakeup() callback that is not used any more. * Introduce device_set_wakeup_capable() that will set the power.can_wakeup flag of given device. * Rework PCI device PM initialization so that, if given device is capable of generating wake-up events, either natively through the PME# mechanism, or with the help of the platform, its power.can_wakeup flag is set and its power.should_wakeup flag is unset as appropriate. * Make ACPI set the power.can_wakeup flag for devices found to be wake-up capable by it. * Make the ACPI wake-up code enable/disable GPEs for devices that have the wakeup.flags.prepared flag set (which means that their wake-up power has been enabled). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07 09:34:48 +08:00
ACPICA: Introduce acpi_gpe_wakeup() ACPICA uses reference counters to avoid disabling GPEs too early in case they have been enabled for many times. This is done separately for runtime and for wakeup, but the wakeup GPE reference counter is not really necessary, because GPEs are only enabled to wake up the system at the hardware level by acpi_enter_sleep_state(). Thus it only is necessary to set the corresponding bits in the wakeup enable masks of these GPEs' registers right before the system enters a sleep state. Moreover, the GPE wakeup enable bits can only be set when the target sleep state of the system is known and they need to be cleared immediately after wakeup regardless of how many wakeup devices are associated with a given GPE. On the basis of the above observations, introduce function acpi_gpe_wakeup() to be used for setting or clearing the enable bit corresponding to a given GPE in its enable register's enable_for_wake mask. Modify the ACPI suspend and wakeup code the use acpi_gpe_wakeup() instead of acpi_{enable|disable}_gpe() to set and clear GPE enable bits in their registers' enable_for_wake masks during system transitions to a sleep state and back to the working state, respectively. [This will allow us to drop the third argument of acpi_{enable|disable}_gpe() and simplify the GPE handling code.] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-25 07:18:39 +08:00
if (!dev->wakeup.flags.valid
|| sleep_state > (u32) dev->wakeup.sleep_state
|| !(device_may_wakeup(&dev->dev)
|| dev->wakeup.prepare_count))
continue;
if (device_may_wakeup(&dev->dev))
acpi_enable_wakeup_device_power(dev, sleep_state);
/* The wake-up power should have been enabled already. */
acpi_set_gpe_wake_mask(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
ACPICA: Introduce acpi_gpe_wakeup() ACPICA uses reference counters to avoid disabling GPEs too early in case they have been enabled for many times. This is done separately for runtime and for wakeup, but the wakeup GPE reference counter is not really necessary, because GPEs are only enabled to wake up the system at the hardware level by acpi_enter_sleep_state(). Thus it only is necessary to set the corresponding bits in the wakeup enable masks of these GPEs' registers right before the system enters a sleep state. Moreover, the GPE wakeup enable bits can only be set when the target sleep state of the system is known and they need to be cleared immediately after wakeup regardless of how many wakeup devices are associated with a given GPE. On the basis of the above observations, introduce function acpi_gpe_wakeup() to be used for setting or clearing the enable bit corresponding to a given GPE in its enable register's enable_for_wake mask. Modify the ACPI suspend and wakeup code the use acpi_gpe_wakeup() instead of acpi_{enable|disable}_gpe() to set and clear GPE enable bits in their registers' enable_for_wake masks during system transitions to a sleep state and back to the working state, respectively. [This will allow us to drop the third argument of acpi_{enable|disable}_gpe() and simplify the GPE handling code.] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-25 07:18:39 +08:00
ACPI_GPE_ENABLE);
}
}
/**
* acpi_disable_wakeup_devices - Disable devices' wakeup capability.
* @sleep_state: ACPI system sleep state.
*/
void acpi_disable_wakeup_devices(u8 sleep_state)
{
struct list_head *node, *next;
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
ACPICA: Introduce acpi_gpe_wakeup() ACPICA uses reference counters to avoid disabling GPEs too early in case they have been enabled for many times. This is done separately for runtime and for wakeup, but the wakeup GPE reference counter is not really necessary, because GPEs are only enabled to wake up the system at the hardware level by acpi_enter_sleep_state(). Thus it only is necessary to set the corresponding bits in the wakeup enable masks of these GPEs' registers right before the system enters a sleep state. Moreover, the GPE wakeup enable bits can only be set when the target sleep state of the system is known and they need to be cleared immediately after wakeup regardless of how many wakeup devices are associated with a given GPE. On the basis of the above observations, introduce function acpi_gpe_wakeup() to be used for setting or clearing the enable bit corresponding to a given GPE in its enable register's enable_for_wake mask. Modify the ACPI suspend and wakeup code the use acpi_gpe_wakeup() instead of acpi_{enable|disable}_gpe() to set and clear GPE enable bits in their registers' enable_for_wake masks during system transitions to a sleep state and back to the working state, respectively. [This will allow us to drop the third argument of acpi_{enable|disable}_gpe() and simplify the GPE handling code.] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-25 07:18:39 +08:00
if (!dev->wakeup.flags.valid
|| sleep_state > (u32) dev->wakeup.sleep_state
|| !(device_may_wakeup(&dev->dev)
|| dev->wakeup.prepare_count))
continue;
acpi_set_gpe_wake_mask(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
ACPICA: Introduce acpi_gpe_wakeup() ACPICA uses reference counters to avoid disabling GPEs too early in case they have been enabled for many times. This is done separately for runtime and for wakeup, but the wakeup GPE reference counter is not really necessary, because GPEs are only enabled to wake up the system at the hardware level by acpi_enter_sleep_state(). Thus it only is necessary to set the corresponding bits in the wakeup enable masks of these GPEs' registers right before the system enters a sleep state. Moreover, the GPE wakeup enable bits can only be set when the target sleep state of the system is known and they need to be cleared immediately after wakeup regardless of how many wakeup devices are associated with a given GPE. On the basis of the above observations, introduce function acpi_gpe_wakeup() to be used for setting or clearing the enable bit corresponding to a given GPE in its enable register's enable_for_wake mask. Modify the ACPI suspend and wakeup code the use acpi_gpe_wakeup() instead of acpi_{enable|disable}_gpe() to set and clear GPE enable bits in their registers' enable_for_wake masks during system transitions to a sleep state and back to the working state, respectively. [This will allow us to drop the third argument of acpi_{enable|disable}_gpe() and simplify the GPE handling code.] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-25 07:18:39 +08:00
ACPI_GPE_DISABLE);
if (device_may_wakeup(&dev->dev))
ACPICA: Introduce acpi_gpe_wakeup() ACPICA uses reference counters to avoid disabling GPEs too early in case they have been enabled for many times. This is done separately for runtime and for wakeup, but the wakeup GPE reference counter is not really necessary, because GPEs are only enabled to wake up the system at the hardware level by acpi_enter_sleep_state(). Thus it only is necessary to set the corresponding bits in the wakeup enable masks of these GPEs' registers right before the system enters a sleep state. Moreover, the GPE wakeup enable bits can only be set when the target sleep state of the system is known and they need to be cleared immediately after wakeup regardless of how many wakeup devices are associated with a given GPE. On the basis of the above observations, introduce function acpi_gpe_wakeup() to be used for setting or clearing the enable bit corresponding to a given GPE in its enable register's enable_for_wake mask. Modify the ACPI suspend and wakeup code the use acpi_gpe_wakeup() instead of acpi_{enable|disable}_gpe() to set and clear GPE enable bits in their registers' enable_for_wake masks during system transitions to a sleep state and back to the working state, respectively. [This will allow us to drop the third argument of acpi_{enable|disable}_gpe() and simplify the GPE handling code.] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-25 07:18:39 +08:00
acpi_disable_wakeup_device_power(dev);
}
}
int __init acpi_wakeup_device_init(void)
{
struct list_head *node, *next;
mutex_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev = container_of(node,
struct acpi_device,
wakeup_list);
if (device_can_wakeup(&dev->dev)) {
/* Button GPEs are supposed to be always enabled. */
acpi_enable_gpe(dev->wakeup.gpe_device,
dev->wakeup.gpe_number);
device_set_wakeup_enable(&dev->dev, true);
}
}
mutex_unlock(&acpi_device_lock);
return 0;
}