linux_old1/arch/arm/mach-omap2/gpmc-nand.c

143 lines
3.5 KiB
C
Raw Normal View History

/*
* gpmc-nand.c
*
* Copyright (C) 2009 Texas Instruments
* Vimal Singh <vimalsingh@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/mach/flash.h>
#include <plat/nand.h>
#include <plat/board.h>
#include <plat/gpmc.h>
#define WR_RD_PIN_MONITORING 0x00600000
static struct omap_nand_platform_data *gpmc_nand_data;
static struct resource gpmc_nand_resource = {
.flags = IORESOURCE_MEM,
};
static struct platform_device gpmc_nand_device = {
.name = "omap2-nand",
.id = 0,
.num_resources = 1,
.resource = &gpmc_nand_resource,
};
static int omap2_nand_gpmc_retime(void)
{
struct gpmc_timings t;
int err;
if (!gpmc_nand_data->gpmc_t)
return 0;
memset(&t, 0, sizeof(t));
t.sync_clk = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->sync_clk);
t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on);
/* Read */
t.adv_rd_off = gpmc_round_ns_to_ticks(
gpmc_nand_data->gpmc_t->adv_rd_off);
t.oe_on = t.adv_on;
t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access);
t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off);
t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off);
t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle);
/* Write */
t.adv_wr_off = gpmc_round_ns_to_ticks(
gpmc_nand_data->gpmc_t->adv_wr_off);
t.we_on = t.oe_on;
if (cpu_is_omap34xx()) {
t.wr_data_mux_bus = gpmc_round_ns_to_ticks(
gpmc_nand_data->gpmc_t->wr_data_mux_bus);
t.wr_access = gpmc_round_ns_to_ticks(
gpmc_nand_data->gpmc_t->wr_access);
}
t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off);
t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off);
t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
/* Configure GPMC */
gpmc_cs_write_reg(gpmc_nand_data->cs, GPMC_CS_CONFIG1,
GPMC_CONFIG1_DEVICESIZE(gpmc_nand_data->devsize) |
GPMC_CONFIG1_DEVICETYPE_NAND);
err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
if (err)
return err;
return 0;
}
static int gpmc_nand_setup(void)
{
struct device *dev = &gpmc_nand_device.dev;
/* Set timings in GPMC */
if (omap2_nand_gpmc_retime() < 0) {
dev_err(dev, "Unable to set gpmc timings\n");
return -EINVAL;
}
return 0;
}
int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
{
unsigned int val;
int err = 0;
struct device *dev = &gpmc_nand_device.dev;
gpmc_nand_data = _nand_data;
gpmc_nand_data->nand_setup = gpmc_nand_setup;
gpmc_nand_device.dev.platform_data = gpmc_nand_data;
err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
&gpmc_nand_data->phys_base);
if (err < 0) {
dev_err(dev, "Cannot request GPMC CS\n");
return err;
}
err = gpmc_nand_setup();
if (err < 0) {
dev_err(dev, "NAND platform setup failed: %d\n", err);
return err;
}
/* Enable RD PIN Monitoring Reg */
if (gpmc_nand_data->dev_ready) {
val = gpmc_cs_read_reg(gpmc_nand_data->cs,
GPMC_CS_CONFIG1);
val |= WR_RD_PIN_MONITORING;
gpmc_cs_write_reg(gpmc_nand_data->cs,
GPMC_CS_CONFIG1, val);
}
err = platform_device_register(&gpmc_nand_device);
if (err < 0) {
dev_err(dev, "Unable to register NAND device\n");
goto out_free_cs;
}
return 0;
out_free_cs:
gpmc_cs_free(gpmc_nand_data->cs);
return err;
}