p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/Documentation/devicetree/bindings/serial/mvebu-uart.txt

14 lines
362 B
Plaintext
Raw Normal View History

serial: mvebu-uart: initial support for Armada-3700 serial port Armada-3700's uart is a simple serial port, which doesn't support. Configuring the modem control lines. The uart port has a 32 bytes Tx FIFO and a 64 bytes Rx FIFO The uart driver implements the uart core operations. It also support the system (early) console based on Armada-3700's serial port. Known Issue: The uart driver currently doesn't support clock programming, which means the baud-rate stays with the default value configured by the bootloader at boot time [gregory.clement@free-electrons.com: Rewrite many part which are too long to enumerate] Signed-off-by: Wilson Ding <dingwei@marvell.com> Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-17 02:14:53 +08:00
* Marvell UART : Non standard UART used in some of Marvell EBU SoCs (e.g., Armada-3700)
Required properties:
- compatible: "marvell,armada-3700-uart"
- reg: offset and length of the register set for the device.
- interrupts: device interrupt
Example:
serial@12000 {
compatible = "marvell,armada-3700-uart";
arm64: dts: marvell: Fix A37xx UART0 register size Armada-37xx UART0 registers are 0x200 bytes wide. Right next to them are the UART1 registers that should not be declared in this node. Update the example in DT bindings document accordingly. Signed-off-by: allen yan <yanwei@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-09-07 21:04:53 +08:00
reg = <0x12000 0x200>;
serial: mvebu-uart: initial support for Armada-3700 serial port Armada-3700's uart is a simple serial port, which doesn't support. Configuring the modem control lines. The uart port has a 32 bytes Tx FIFO and a 64 bytes Rx FIFO The uart driver implements the uart core operations. It also support the system (early) console based on Armada-3700's serial port. Known Issue: The uart driver currently doesn't support clock programming, which means the baud-rate stays with the default value configured by the bootloader at boot time [gregory.clement@free-electrons.com: Rewrite many part which are too long to enumerate] Signed-off-by: Wilson Ding <dingwei@marvell.com> Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-17 02:14:53 +08:00
interrupts = <43>;
};