linux_old1/drivers/net/macb.c

1349 lines
32 KiB
C
Raw Normal View History

/*
* Atmel MACB Ethernet Controller driver
*
* Copyright (C) 2004-2006 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <mach/board.h>
#include <mach/cpu.h>
#include "macb.h"
#define RX_BUFFER_SIZE 128
#define RX_RING_SIZE 512
#define RX_RING_BYTES (sizeof(struct dma_desc) * RX_RING_SIZE)
/* Make the IP header word-aligned (the ethernet header is 14 bytes) */
#define RX_OFFSET 2
#define TX_RING_SIZE 128
#define DEF_TX_RING_PENDING (TX_RING_SIZE - 1)
#define TX_RING_BYTES (sizeof(struct dma_desc) * TX_RING_SIZE)
#define TX_RING_GAP(bp) \
(TX_RING_SIZE - (bp)->tx_pending)
#define TX_BUFFS_AVAIL(bp) \
(((bp)->tx_tail <= (bp)->tx_head) ? \
(bp)->tx_tail + (bp)->tx_pending - (bp)->tx_head : \
(bp)->tx_tail - (bp)->tx_head - TX_RING_GAP(bp))
#define NEXT_TX(n) (((n) + 1) & (TX_RING_SIZE - 1))
#define NEXT_RX(n) (((n) + 1) & (RX_RING_SIZE - 1))
/* minimum number of free TX descriptors before waking up TX process */
#define MACB_TX_WAKEUP_THRESH (TX_RING_SIZE / 4)
#define MACB_RX_INT_FLAGS (MACB_BIT(RCOMP) | MACB_BIT(RXUBR) \
| MACB_BIT(ISR_ROVR))
static void __macb_set_hwaddr(struct macb *bp)
{
u32 bottom;
u16 top;
bottom = cpu_to_le32(*((u32 *)bp->dev->dev_addr));
macb_writel(bp, SA1B, bottom);
top = cpu_to_le16(*((u16 *)(bp->dev->dev_addr + 4)));
macb_writel(bp, SA1T, top);
}
static void __init macb_get_hwaddr(struct macb *bp)
{
u32 bottom;
u16 top;
u8 addr[6];
bottom = macb_readl(bp, SA1B);
top = macb_readl(bp, SA1T);
addr[0] = bottom & 0xff;
addr[1] = (bottom >> 8) & 0xff;
addr[2] = (bottom >> 16) & 0xff;
addr[3] = (bottom >> 24) & 0xff;
addr[4] = top & 0xff;
addr[5] = (top >> 8) & 0xff;
if (is_valid_ether_addr(addr)) {
memcpy(bp->dev->dev_addr, addr, sizeof(addr));
} else {
dev_info(&bp->pdev->dev, "invalid hw address, using random\n");
random_ether_addr(bp->dev->dev_addr);
}
}
static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
{
struct macb *bp = bus->priv;
int value;
macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
| MACB_BF(RW, MACB_MAN_READ)
| MACB_BF(PHYA, mii_id)
| MACB_BF(REGA, regnum)
| MACB_BF(CODE, MACB_MAN_CODE)));
/* wait for end of transfer */
while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
cpu_relax();
value = MACB_BFEXT(DATA, macb_readl(bp, MAN));
return value;
}
static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
u16 value)
{
struct macb *bp = bus->priv;
macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
| MACB_BF(RW, MACB_MAN_WRITE)
| MACB_BF(PHYA, mii_id)
| MACB_BF(REGA, regnum)
| MACB_BF(CODE, MACB_MAN_CODE)
| MACB_BF(DATA, value)));
/* wait for end of transfer */
while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
cpu_relax();
return 0;
}
static int macb_mdio_reset(struct mii_bus *bus)
{
return 0;
}
static void macb_handle_link_change(struct net_device *dev)
{
struct macb *bp = netdev_priv(dev);
struct phy_device *phydev = bp->phy_dev;
unsigned long flags;
int status_change = 0;
spin_lock_irqsave(&bp->lock, flags);
if (phydev->link) {
if ((bp->speed != phydev->speed) ||
(bp->duplex != phydev->duplex)) {
u32 reg;
reg = macb_readl(bp, NCFGR);
reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
if (phydev->duplex)
reg |= MACB_BIT(FD);
if (phydev->speed == SPEED_100)
reg |= MACB_BIT(SPD);
macb_writel(bp, NCFGR, reg);
bp->speed = phydev->speed;
bp->duplex = phydev->duplex;
status_change = 1;
}
}
if (phydev->link != bp->link) {
if (!phydev->link) {
bp->speed = 0;
bp->duplex = -1;
}
bp->link = phydev->link;
status_change = 1;
}
spin_unlock_irqrestore(&bp->lock, flags);
if (status_change) {
if (phydev->link)
printk(KERN_INFO "%s: link up (%d/%s)\n",
dev->name, phydev->speed,
DUPLEX_FULL == phydev->duplex ? "Full":"Half");
else
printk(KERN_INFO "%s: link down\n", dev->name);
}
}
/* based on au1000_eth. c*/
static int macb_mii_probe(struct net_device *dev)
{
struct macb *bp = netdev_priv(dev);
struct phy_device *phydev = NULL;
struct eth_platform_data *pdata;
int phy_addr;
/* find the first phy */
for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
if (bp->mii_bus->phy_map[phy_addr]) {
phydev = bp->mii_bus->phy_map[phy_addr];
break;
}
}
if (!phydev) {
printk (KERN_ERR "%s: no PHY found\n", dev->name);
return -1;
}
pdata = bp->pdev->dev.platform_data;
/* TODO : add pin_irq */
/* attach the mac to the phy */
if (pdata && pdata->is_rmii) {
phydev = phy_connect(dev, phydev->dev.bus_id,
&macb_handle_link_change, 0, PHY_INTERFACE_MODE_RMII);
} else {
phydev = phy_connect(dev, phydev->dev.bus_id,
&macb_handle_link_change, 0, PHY_INTERFACE_MODE_MII);
}
if (IS_ERR(phydev)) {
printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
return PTR_ERR(phydev);
}
/* mask with MAC supported features */
phydev->supported &= PHY_BASIC_FEATURES;
phydev->advertising = phydev->supported;
bp->link = 0;
bp->speed = 0;
bp->duplex = -1;
bp->phy_dev = phydev;
return 0;
}
static int macb_mii_init(struct macb *bp)
{
struct eth_platform_data *pdata;
int err = -ENXIO, i;
/* Enable managment port */
macb_writel(bp, NCR, MACB_BIT(MPE));
bp->mii_bus = mdiobus_alloc();
if (bp->mii_bus == NULL) {
err = -ENOMEM;
goto err_out;
}
bp->mii_bus->name = "MACB_mii_bus";
bp->mii_bus->read = &macb_mdio_read;
bp->mii_bus->write = &macb_mdio_write;
bp->mii_bus->reset = &macb_mdio_reset;
snprintf(bp->mii_bus->id, MII_BUS_ID_SIZE, "%x", bp->pdev->id);
bp->mii_bus->priv = bp;
bp->mii_bus->parent = &bp->dev->dev;
pdata = bp->pdev->dev.platform_data;
if (pdata)
bp->mii_bus->phy_mask = pdata->phy_mask;
bp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
if (!bp->mii_bus->irq) {
err = -ENOMEM;
goto err_out_free_mdiobus;
}
for (i = 0; i < PHY_MAX_ADDR; i++)
bp->mii_bus->irq[i] = PHY_POLL;
platform_set_drvdata(bp->dev, bp->mii_bus);
if (mdiobus_register(bp->mii_bus))
goto err_out_free_mdio_irq;
if (macb_mii_probe(bp->dev) != 0) {
goto err_out_unregister_bus;
}
return 0;
err_out_unregister_bus:
mdiobus_unregister(bp->mii_bus);
err_out_free_mdio_irq:
kfree(bp->mii_bus->irq);
err_out_free_mdiobus:
mdiobus_free(bp->mii_bus);
err_out:
return err;
}
static void macb_update_stats(struct macb *bp)
{
u32 __iomem *reg = bp->regs + MACB_PFR;
u32 *p = &bp->hw_stats.rx_pause_frames;
u32 *end = &bp->hw_stats.tx_pause_frames + 1;
WARN_ON((unsigned long)(end - p - 1) != (MACB_TPF - MACB_PFR) / 4);
for(; p < end; p++, reg++)
*p += __raw_readl(reg);
}
static void macb_tx(struct macb *bp)
{
unsigned int tail;
unsigned int head;
u32 status;
status = macb_readl(bp, TSR);
macb_writel(bp, TSR, status);
dev_dbg(&bp->pdev->dev, "macb_tx status = %02lx\n",
(unsigned long)status);
if (status & MACB_BIT(UND)) {
int i;
printk(KERN_ERR "%s: TX underrun, resetting buffers\n",
bp->dev->name);
head = bp->tx_head;
/*Mark all the buffer as used to avoid sending a lost buffer*/
for (i = 0; i < TX_RING_SIZE; i++)
bp->tx_ring[i].ctrl = MACB_BIT(TX_USED);
/* free transmit buffer in upper layer*/
for (tail = bp->tx_tail; tail != head; tail = NEXT_TX(tail)) {
struct ring_info *rp = &bp->tx_skb[tail];
struct sk_buff *skb = rp->skb;
BUG_ON(skb == NULL);
rmb();
dma_unmap_single(&bp->pdev->dev, rp->mapping, skb->len,
DMA_TO_DEVICE);
rp->skb = NULL;
dev_kfree_skb_irq(skb);
}
bp->tx_head = bp->tx_tail = 0;
}
if (!(status & MACB_BIT(COMP)))
/*
* This may happen when a buffer becomes complete
* between reading the ISR and scanning the
* descriptors. Nothing to worry about.
*/
return;
head = bp->tx_head;
for (tail = bp->tx_tail; tail != head; tail = NEXT_TX(tail)) {
struct ring_info *rp = &bp->tx_skb[tail];
struct sk_buff *skb = rp->skb;
u32 bufstat;
BUG_ON(skb == NULL);
rmb();
bufstat = bp->tx_ring[tail].ctrl;
if (!(bufstat & MACB_BIT(TX_USED)))
break;
dev_dbg(&bp->pdev->dev, "skb %u (data %p) TX complete\n",
tail, skb->data);
dma_unmap_single(&bp->pdev->dev, rp->mapping, skb->len,
DMA_TO_DEVICE);
bp->stats.tx_packets++;
bp->stats.tx_bytes += skb->len;
rp->skb = NULL;
dev_kfree_skb_irq(skb);
}
bp->tx_tail = tail;
if (netif_queue_stopped(bp->dev) &&
TX_BUFFS_AVAIL(bp) > MACB_TX_WAKEUP_THRESH)
netif_wake_queue(bp->dev);
}
static int macb_rx_frame(struct macb *bp, unsigned int first_frag,
unsigned int last_frag)
{
unsigned int len;
unsigned int frag;
unsigned int offset = 0;
struct sk_buff *skb;
len = MACB_BFEXT(RX_FRMLEN, bp->rx_ring[last_frag].ctrl);
dev_dbg(&bp->pdev->dev, "macb_rx_frame frags %u - %u (len %u)\n",
first_frag, last_frag, len);
skb = dev_alloc_skb(len + RX_OFFSET);
if (!skb) {
bp->stats.rx_dropped++;
for (frag = first_frag; ; frag = NEXT_RX(frag)) {
bp->rx_ring[frag].addr &= ~MACB_BIT(RX_USED);
if (frag == last_frag)
break;
}
wmb();
return 1;
}
skb_reserve(skb, RX_OFFSET);
skb->ip_summed = CHECKSUM_NONE;
skb_put(skb, len);
for (frag = first_frag; ; frag = NEXT_RX(frag)) {
unsigned int frag_len = RX_BUFFER_SIZE;
if (offset + frag_len > len) {
BUG_ON(frag != last_frag);
frag_len = len - offset;
}
skb_copy_to_linear_data_offset(skb, offset,
(bp->rx_buffers +
(RX_BUFFER_SIZE * frag)),
frag_len);
offset += RX_BUFFER_SIZE;
bp->rx_ring[frag].addr &= ~MACB_BIT(RX_USED);
wmb();
if (frag == last_frag)
break;
}
skb->protocol = eth_type_trans(skb, bp->dev);
bp->stats.rx_packets++;
bp->stats.rx_bytes += len;
dev_dbg(&bp->pdev->dev, "received skb of length %u, csum: %08x\n",
skb->len, skb->csum);
netif_receive_skb(skb);
return 0;
}
/* Mark DMA descriptors from begin up to and not including end as unused */
static void discard_partial_frame(struct macb *bp, unsigned int begin,
unsigned int end)
{
unsigned int frag;
for (frag = begin; frag != end; frag = NEXT_RX(frag))
bp->rx_ring[frag].addr &= ~MACB_BIT(RX_USED);
wmb();
/*
* When this happens, the hardware stats registers for
* whatever caused this is updated, so we don't have to record
* anything.
*/
}
static int macb_rx(struct macb *bp, int budget)
{
int received = 0;
unsigned int tail = bp->rx_tail;
int first_frag = -1;
for (; budget > 0; tail = NEXT_RX(tail)) {
u32 addr, ctrl;
rmb();
addr = bp->rx_ring[tail].addr;
ctrl = bp->rx_ring[tail].ctrl;
if (!(addr & MACB_BIT(RX_USED)))
break;
if (ctrl & MACB_BIT(RX_SOF)) {
if (first_frag != -1)
discard_partial_frame(bp, first_frag, tail);
first_frag = tail;
}
if (ctrl & MACB_BIT(RX_EOF)) {
int dropped;
BUG_ON(first_frag == -1);
dropped = macb_rx_frame(bp, first_frag, tail);
first_frag = -1;
if (!dropped) {
received++;
budget--;
}
}
}
if (first_frag != -1)
bp->rx_tail = first_frag;
else
bp->rx_tail = tail;
return received;
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
static int macb_poll(struct napi_struct *napi, int budget)
{
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
struct macb *bp = container_of(napi, struct macb, napi);
struct net_device *dev = bp->dev;
int work_done;
u32 status;
status = macb_readl(bp, RSR);
macb_writel(bp, RSR, status);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
work_done = 0;
if (!status) {
/*
* This may happen if an interrupt was pending before
* this function was called last time, and no packets
* have been received since.
*/
netif_rx_complete(napi);
goto out;
}
dev_dbg(&bp->pdev->dev, "poll: status = %08lx, budget = %d\n",
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
(unsigned long)status, budget);
if (!(status & MACB_BIT(REC))) {
dev_warn(&bp->pdev->dev,
"No RX buffers complete, status = %02lx\n",
(unsigned long)status);
netif_rx_complete(napi);
goto out;
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
work_done = macb_rx(bp, budget);
if (work_done < budget)
netif_rx_complete(napi);
/*
* We've done what we can to clean the buffers. Make sure we
* get notified when new packets arrive.
*/
out:
macb_writel(bp, IER, MACB_RX_INT_FLAGS);
/* TODO: Handle errors */
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
return work_done;
}
static irqreturn_t macb_interrupt(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct macb *bp = netdev_priv(dev);
u32 status;
status = macb_readl(bp, ISR);
if (unlikely(!status))
return IRQ_NONE;
spin_lock(&bp->lock);
while (status) {
/* close possible race with dev_close */
if (unlikely(!netif_running(dev))) {
macb_writel(bp, IDR, ~0UL);
break;
}
if (status & MACB_RX_INT_FLAGS) {
if (netif_rx_schedule_prep(&bp->napi)) {
/*
* There's no point taking any more interrupts
* until we have processed the buffers
*/
macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
dev_dbg(&bp->pdev->dev,
"scheduling RX softirq\n");
__netif_rx_schedule(&bp->napi);
}
}
if (status & (MACB_BIT(TCOMP) | MACB_BIT(ISR_TUND)))
macb_tx(bp);
/*
* Link change detection isn't possible with RMII, so we'll
* add that if/when we get our hands on a full-blown MII PHY.
*/
if (status & MACB_BIT(HRESP)) {
/*
* TODO: Reset the hardware, and maybe move the printk
* to a lower-priority context as well (work queue?)
*/
printk(KERN_ERR "%s: DMA bus error: HRESP not OK\n",
dev->name);
}
status = macb_readl(bp, ISR);
}
spin_unlock(&bp->lock);
return IRQ_HANDLED;
}
static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct macb *bp = netdev_priv(dev);
dma_addr_t mapping;
unsigned int len, entry;
u32 ctrl;
#ifdef DEBUG
int i;
dev_dbg(&bp->pdev->dev,
"start_xmit: len %u head %p data %p tail %p end %p\n",
skb->len, skb->head, skb->data,
skb_tail_pointer(skb), skb_end_pointer(skb));
dev_dbg(&bp->pdev->dev,
"data:");
for (i = 0; i < 16; i++)
printk(" %02x", (unsigned int)skb->data[i]);
printk("\n");
#endif
len = skb->len;
spin_lock_irq(&bp->lock);
/* This is a hard error, log it. */
if (TX_BUFFS_AVAIL(bp) < 1) {
netif_stop_queue(dev);
spin_unlock_irq(&bp->lock);
dev_err(&bp->pdev->dev,
"BUG! Tx Ring full when queue awake!\n");
dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n",
bp->tx_head, bp->tx_tail);
return 1;
}
entry = bp->tx_head;
dev_dbg(&bp->pdev->dev, "Allocated ring entry %u\n", entry);
mapping = dma_map_single(&bp->pdev->dev, skb->data,
len, DMA_TO_DEVICE);
bp->tx_skb[entry].skb = skb;
bp->tx_skb[entry].mapping = mapping;
dev_dbg(&bp->pdev->dev, "Mapped skb data %p to DMA addr %08lx\n",
skb->data, (unsigned long)mapping);
ctrl = MACB_BF(TX_FRMLEN, len);
ctrl |= MACB_BIT(TX_LAST);
if (entry == (TX_RING_SIZE - 1))
ctrl |= MACB_BIT(TX_WRAP);
bp->tx_ring[entry].addr = mapping;
bp->tx_ring[entry].ctrl = ctrl;
wmb();
entry = NEXT_TX(entry);
bp->tx_head = entry;
macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TSTART));
if (TX_BUFFS_AVAIL(bp) < 1)
netif_stop_queue(dev);
spin_unlock_irq(&bp->lock);
dev->trans_start = jiffies;
return 0;
}
static void macb_free_consistent(struct macb *bp)
{
if (bp->tx_skb) {
kfree(bp->tx_skb);
bp->tx_skb = NULL;
}
if (bp->rx_ring) {
dma_free_coherent(&bp->pdev->dev, RX_RING_BYTES,
bp->rx_ring, bp->rx_ring_dma);
bp->rx_ring = NULL;
}
if (bp->tx_ring) {
dma_free_coherent(&bp->pdev->dev, TX_RING_BYTES,
bp->tx_ring, bp->tx_ring_dma);
bp->tx_ring = NULL;
}
if (bp->rx_buffers) {
dma_free_coherent(&bp->pdev->dev,
RX_RING_SIZE * RX_BUFFER_SIZE,
bp->rx_buffers, bp->rx_buffers_dma);
bp->rx_buffers = NULL;
}
}
static int macb_alloc_consistent(struct macb *bp)
{
int size;
size = TX_RING_SIZE * sizeof(struct ring_info);
bp->tx_skb = kmalloc(size, GFP_KERNEL);
if (!bp->tx_skb)
goto out_err;
size = RX_RING_BYTES;
bp->rx_ring = dma_alloc_coherent(&bp->pdev->dev, size,
&bp->rx_ring_dma, GFP_KERNEL);
if (!bp->rx_ring)
goto out_err;
dev_dbg(&bp->pdev->dev,
"Allocated RX ring of %d bytes at %08lx (mapped %p)\n",
size, (unsigned long)bp->rx_ring_dma, bp->rx_ring);
size = TX_RING_BYTES;
bp->tx_ring = dma_alloc_coherent(&bp->pdev->dev, size,
&bp->tx_ring_dma, GFP_KERNEL);
if (!bp->tx_ring)
goto out_err;
dev_dbg(&bp->pdev->dev,
"Allocated TX ring of %d bytes at %08lx (mapped %p)\n",
size, (unsigned long)bp->tx_ring_dma, bp->tx_ring);
size = RX_RING_SIZE * RX_BUFFER_SIZE;
bp->rx_buffers = dma_alloc_coherent(&bp->pdev->dev, size,
&bp->rx_buffers_dma, GFP_KERNEL);
if (!bp->rx_buffers)
goto out_err;
dev_dbg(&bp->pdev->dev,
"Allocated RX buffers of %d bytes at %08lx (mapped %p)\n",
size, (unsigned long)bp->rx_buffers_dma, bp->rx_buffers);
return 0;
out_err:
macb_free_consistent(bp);
return -ENOMEM;
}
static void macb_init_rings(struct macb *bp)
{
int i;
dma_addr_t addr;
addr = bp->rx_buffers_dma;
for (i = 0; i < RX_RING_SIZE; i++) {
bp->rx_ring[i].addr = addr;
bp->rx_ring[i].ctrl = 0;
addr += RX_BUFFER_SIZE;
}
bp->rx_ring[RX_RING_SIZE - 1].addr |= MACB_BIT(RX_WRAP);
for (i = 0; i < TX_RING_SIZE; i++) {
bp->tx_ring[i].addr = 0;
bp->tx_ring[i].ctrl = MACB_BIT(TX_USED);
}
bp->tx_ring[TX_RING_SIZE - 1].ctrl |= MACB_BIT(TX_WRAP);
bp->rx_tail = bp->tx_head = bp->tx_tail = 0;
}
static void macb_reset_hw(struct macb *bp)
{
/* Make sure we have the write buffer for ourselves */
wmb();
/*
* Disable RX and TX (XXX: Should we halt the transmission
* more gracefully?)
*/
macb_writel(bp, NCR, 0);
/* Clear the stats registers (XXX: Update stats first?) */
macb_writel(bp, NCR, MACB_BIT(CLRSTAT));
/* Clear all status flags */
macb_writel(bp, TSR, ~0UL);
macb_writel(bp, RSR, ~0UL);
/* Disable all interrupts */
macb_writel(bp, IDR, ~0UL);
macb_readl(bp, ISR);
}
static void macb_init_hw(struct macb *bp)
{
u32 config;
macb_reset_hw(bp);
__macb_set_hwaddr(bp);
config = macb_readl(bp, NCFGR) & MACB_BF(CLK, -1L);
config |= MACB_BIT(PAE); /* PAuse Enable */
config |= MACB_BIT(DRFCS); /* Discard Rx FCS */
if (bp->dev->flags & IFF_PROMISC)
config |= MACB_BIT(CAF); /* Copy All Frames */
if (!(bp->dev->flags & IFF_BROADCAST))
config |= MACB_BIT(NBC); /* No BroadCast */
macb_writel(bp, NCFGR, config);
/* Initialize TX and RX buffers */
macb_writel(bp, RBQP, bp->rx_ring_dma);
macb_writel(bp, TBQP, bp->tx_ring_dma);
/* Enable TX and RX */
macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE) | MACB_BIT(MPE));
/* Enable interrupts */
macb_writel(bp, IER, (MACB_BIT(RCOMP)
| MACB_BIT(RXUBR)
| MACB_BIT(ISR_TUND)
| MACB_BIT(ISR_RLE)
| MACB_BIT(TXERR)
| MACB_BIT(TCOMP)
| MACB_BIT(ISR_ROVR)
| MACB_BIT(HRESP)));
}
/*
* The hash address register is 64 bits long and takes up two
* locations in the memory map. The least significant bits are stored
* in EMAC_HSL and the most significant bits in EMAC_HSH.
*
* The unicast hash enable and the multicast hash enable bits in the
* network configuration register enable the reception of hash matched
* frames. The destination address is reduced to a 6 bit index into
* the 64 bit hash register using the following hash function. The
* hash function is an exclusive or of every sixth bit of the
* destination address.
*
* hi[5] = da[5] ^ da[11] ^ da[17] ^ da[23] ^ da[29] ^ da[35] ^ da[41] ^ da[47]
* hi[4] = da[4] ^ da[10] ^ da[16] ^ da[22] ^ da[28] ^ da[34] ^ da[40] ^ da[46]
* hi[3] = da[3] ^ da[09] ^ da[15] ^ da[21] ^ da[27] ^ da[33] ^ da[39] ^ da[45]
* hi[2] = da[2] ^ da[08] ^ da[14] ^ da[20] ^ da[26] ^ da[32] ^ da[38] ^ da[44]
* hi[1] = da[1] ^ da[07] ^ da[13] ^ da[19] ^ da[25] ^ da[31] ^ da[37] ^ da[43]
* hi[0] = da[0] ^ da[06] ^ da[12] ^ da[18] ^ da[24] ^ da[30] ^ da[36] ^ da[42]
*
* da[0] represents the least significant bit of the first byte
* received, that is, the multicast/unicast indicator, and da[47]
* represents the most significant bit of the last byte received. If
* the hash index, hi[n], points to a bit that is set in the hash
* register then the frame will be matched according to whether the
* frame is multicast or unicast. A multicast match will be signalled
* if the multicast hash enable bit is set, da[0] is 1 and the hash
* index points to a bit set in the hash register. A unicast match
* will be signalled if the unicast hash enable bit is set, da[0] is 0
* and the hash index points to a bit set in the hash register. To
* receive all multicast frames, the hash register should be set with
* all ones and the multicast hash enable bit should be set in the
* network configuration register.
*/
static inline int hash_bit_value(int bitnr, __u8 *addr)
{
if (addr[bitnr / 8] & (1 << (bitnr % 8)))
return 1;
return 0;
}
/*
* Return the hash index value for the specified address.
*/
static int hash_get_index(__u8 *addr)
{
int i, j, bitval;
int hash_index = 0;
for (j = 0; j < 6; j++) {
for (i = 0, bitval = 0; i < 8; i++)
bitval ^= hash_bit_value(i*6 + j, addr);
hash_index |= (bitval << j);
}
return hash_index;
}
/*
* Add multicast addresses to the internal multicast-hash table.
*/
static void macb_sethashtable(struct net_device *dev)
{
struct dev_mc_list *curr;
unsigned long mc_filter[2];
unsigned int i, bitnr;
struct macb *bp = netdev_priv(dev);
mc_filter[0] = mc_filter[1] = 0;
curr = dev->mc_list;
for (i = 0; i < dev->mc_count; i++, curr = curr->next) {
if (!curr) break; /* unexpected end of list */
bitnr = hash_get_index(curr->dmi_addr);
mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
}
macb_writel(bp, HRB, mc_filter[0]);
macb_writel(bp, HRT, mc_filter[1]);
}
/*
* Enable/Disable promiscuous and multicast modes.
*/
static void macb_set_rx_mode(struct net_device *dev)
{
unsigned long cfg;
struct macb *bp = netdev_priv(dev);
cfg = macb_readl(bp, NCFGR);
if (dev->flags & IFF_PROMISC)
/* Enable promiscuous mode */
cfg |= MACB_BIT(CAF);
else if (dev->flags & (~IFF_PROMISC))
/* Disable promiscuous mode */
cfg &= ~MACB_BIT(CAF);
if (dev->flags & IFF_ALLMULTI) {
/* Enable all multicast mode */
macb_writel(bp, HRB, -1);
macb_writel(bp, HRT, -1);
cfg |= MACB_BIT(NCFGR_MTI);
} else if (dev->mc_count > 0) {
/* Enable specific multicasts */
macb_sethashtable(dev);
cfg |= MACB_BIT(NCFGR_MTI);
} else if (dev->flags & (~IFF_ALLMULTI)) {
/* Disable all multicast mode */
macb_writel(bp, HRB, 0);
macb_writel(bp, HRT, 0);
cfg &= ~MACB_BIT(NCFGR_MTI);
}
macb_writel(bp, NCFGR, cfg);
}
static int macb_open(struct net_device *dev)
{
struct macb *bp = netdev_priv(dev);
int err;
dev_dbg(&bp->pdev->dev, "open\n");
/* if the phy is not yet register, retry later*/
if (!bp->phy_dev)
return -EAGAIN;
if (!is_valid_ether_addr(dev->dev_addr))
return -EADDRNOTAVAIL;
err = macb_alloc_consistent(bp);
if (err) {
printk(KERN_ERR
"%s: Unable to allocate DMA memory (error %d)\n",
dev->name, err);
return err;
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
napi_enable(&bp->napi);
macb_init_rings(bp);
macb_init_hw(bp);
/* schedule a link state check */
phy_start(bp->phy_dev);
netif_start_queue(dev);
return 0;
}
static int macb_close(struct net_device *dev)
{
struct macb *bp = netdev_priv(dev);
unsigned long flags;
netif_stop_queue(dev);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
napi_disable(&bp->napi);
if (bp->phy_dev)
phy_stop(bp->phy_dev);
spin_lock_irqsave(&bp->lock, flags);
macb_reset_hw(bp);
netif_carrier_off(dev);
spin_unlock_irqrestore(&bp->lock, flags);
macb_free_consistent(bp);
return 0;
}
static struct net_device_stats *macb_get_stats(struct net_device *dev)
{
struct macb *bp = netdev_priv(dev);
struct net_device_stats *nstat = &bp->stats;
struct macb_stats *hwstat = &bp->hw_stats;
/* read stats from hardware */
macb_update_stats(bp);
/* Convert HW stats into netdevice stats */
nstat->rx_errors = (hwstat->rx_fcs_errors +
hwstat->rx_align_errors +
hwstat->rx_resource_errors +
hwstat->rx_overruns +
hwstat->rx_oversize_pkts +
hwstat->rx_jabbers +
hwstat->rx_undersize_pkts +
hwstat->sqe_test_errors +
hwstat->rx_length_mismatch);
nstat->tx_errors = (hwstat->tx_late_cols +
hwstat->tx_excessive_cols +
hwstat->tx_underruns +
hwstat->tx_carrier_errors);
nstat->collisions = (hwstat->tx_single_cols +
hwstat->tx_multiple_cols +
hwstat->tx_excessive_cols);
nstat->rx_length_errors = (hwstat->rx_oversize_pkts +
hwstat->rx_jabbers +
hwstat->rx_undersize_pkts +
hwstat->rx_length_mismatch);
nstat->rx_over_errors = hwstat->rx_resource_errors;
nstat->rx_crc_errors = hwstat->rx_fcs_errors;
nstat->rx_frame_errors = hwstat->rx_align_errors;
nstat->rx_fifo_errors = hwstat->rx_overruns;
/* XXX: What does "missed" mean? */
nstat->tx_aborted_errors = hwstat->tx_excessive_cols;
nstat->tx_carrier_errors = hwstat->tx_carrier_errors;
nstat->tx_fifo_errors = hwstat->tx_underruns;
/* Don't know about heartbeat or window errors... */
return nstat;
}
static int macb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct macb *bp = netdev_priv(dev);
struct phy_device *phydev = bp->phy_dev;
if (!phydev)
return -ENODEV;
return phy_ethtool_gset(phydev, cmd);
}
static int macb_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct macb *bp = netdev_priv(dev);
struct phy_device *phydev = bp->phy_dev;
if (!phydev)
return -ENODEV;
return phy_ethtool_sset(phydev, cmd);
}
static void macb_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
struct macb *bp = netdev_priv(dev);
strcpy(info->driver, bp->pdev->dev.driver->name);
strcpy(info->version, "$Revision: 1.14 $");
strcpy(info->bus_info, bp->pdev->dev.bus_id);
}
static struct ethtool_ops macb_ethtool_ops = {
.get_settings = macb_get_settings,
.set_settings = macb_set_settings,
.get_drvinfo = macb_get_drvinfo,
.get_link = ethtool_op_get_link,
};
static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct macb *bp = netdev_priv(dev);
struct phy_device *phydev = bp->phy_dev;
if (!netif_running(dev))
return -EINVAL;
if (!phydev)
return -ENODEV;
return phy_mii_ioctl(phydev, if_mii(rq), cmd);
}
static int __init macb_probe(struct platform_device *pdev)
{
struct eth_platform_data *pdata;
struct resource *regs;
struct net_device *dev;
struct macb *bp;
struct phy_device *phydev;
unsigned long pclk_hz;
u32 config;
int err = -ENXIO;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs) {
dev_err(&pdev->dev, "no mmio resource defined\n");
goto err_out;
}
err = -ENOMEM;
dev = alloc_etherdev(sizeof(*bp));
if (!dev) {
dev_err(&pdev->dev, "etherdev alloc failed, aborting.\n");
goto err_out;
}
SET_NETDEV_DEV(dev, &pdev->dev);
/* TODO: Actually, we have some interesting features... */
dev->features |= 0;
bp = netdev_priv(dev);
bp->pdev = pdev;
bp->dev = dev;
spin_lock_init(&bp->lock);
#if defined(CONFIG_ARCH_AT91)
bp->pclk = clk_get(&pdev->dev, "macb_clk");
if (IS_ERR(bp->pclk)) {
dev_err(&pdev->dev, "failed to get macb_clk\n");
goto err_out_free_dev;
}
clk_enable(bp->pclk);
#else
bp->pclk = clk_get(&pdev->dev, "pclk");
if (IS_ERR(bp->pclk)) {
dev_err(&pdev->dev, "failed to get pclk\n");
goto err_out_free_dev;
}
bp->hclk = clk_get(&pdev->dev, "hclk");
if (IS_ERR(bp->hclk)) {
dev_err(&pdev->dev, "failed to get hclk\n");
goto err_out_put_pclk;
}
clk_enable(bp->pclk);
clk_enable(bp->hclk);
#endif
bp->regs = ioremap(regs->start, regs->end - regs->start + 1);
if (!bp->regs) {
dev_err(&pdev->dev, "failed to map registers, aborting.\n");
err = -ENOMEM;
goto err_out_disable_clocks;
}
dev->irq = platform_get_irq(pdev, 0);
err = request_irq(dev->irq, macb_interrupt, IRQF_SAMPLE_RANDOM,
dev->name, dev);
if (err) {
printk(KERN_ERR
"%s: Unable to request IRQ %d (error %d)\n",
dev->name, dev->irq, err);
goto err_out_iounmap;
}
dev->open = macb_open;
dev->stop = macb_close;
dev->hard_start_xmit = macb_start_xmit;
dev->get_stats = macb_get_stats;
dev->set_multicast_list = macb_set_rx_mode;
dev->do_ioctl = macb_ioctl;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
netif_napi_add(dev, &bp->napi, macb_poll, 64);
dev->ethtool_ops = &macb_ethtool_ops;
dev->base_addr = regs->start;
/* Set MII management clock divider */
pclk_hz = clk_get_rate(bp->pclk);
if (pclk_hz <= 20000000)
config = MACB_BF(CLK, MACB_CLK_DIV8);
else if (pclk_hz <= 40000000)
config = MACB_BF(CLK, MACB_CLK_DIV16);
else if (pclk_hz <= 80000000)
config = MACB_BF(CLK, MACB_CLK_DIV32);
else
config = MACB_BF(CLK, MACB_CLK_DIV64);
macb_writel(bp, NCFGR, config);
macb_get_hwaddr(bp);
pdata = pdev->dev.platform_data;
if (pdata && pdata->is_rmii)
#if defined(CONFIG_ARCH_AT91)
macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
#else
macb_writel(bp, USRIO, 0);
#endif
else
#if defined(CONFIG_ARCH_AT91)
macb_writel(bp, USRIO, MACB_BIT(CLKEN));
#else
macb_writel(bp, USRIO, MACB_BIT(MII));
#endif
bp->tx_pending = DEF_TX_RING_PENDING;
err = register_netdev(dev);
if (err) {
dev_err(&pdev->dev, "Cannot register net device, aborting.\n");
goto err_out_free_irq;
}
if (macb_mii_init(bp) != 0) {
goto err_out_unregister_netdev;
}
platform_set_drvdata(pdev, dev);
printk(KERN_INFO "%s: Atmel MACB at 0x%08lx irq %d (%pM)\n",
dev->name, dev->base_addr, dev->irq, dev->dev_addr);
phydev = bp->phy_dev;
printk(KERN_INFO "%s: attached PHY driver [%s] "
"(mii_bus:phy_addr=%s, irq=%d)\n",
dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
return 0;
err_out_unregister_netdev:
unregister_netdev(dev);
err_out_free_irq:
free_irq(dev->irq, dev);
err_out_iounmap:
iounmap(bp->regs);
err_out_disable_clocks:
#ifndef CONFIG_ARCH_AT91
clk_disable(bp->hclk);
clk_put(bp->hclk);
#endif
clk_disable(bp->pclk);
#ifndef CONFIG_ARCH_AT91
err_out_put_pclk:
#endif
clk_put(bp->pclk);
err_out_free_dev:
free_netdev(dev);
err_out:
platform_set_drvdata(pdev, NULL);
return err;
}
static int __exit macb_remove(struct platform_device *pdev)
{
struct net_device *dev;
struct macb *bp;
dev = platform_get_drvdata(pdev);
if (dev) {
bp = netdev_priv(dev);
if (bp->phy_dev)
phy_disconnect(bp->phy_dev);
mdiobus_unregister(bp->mii_bus);
kfree(bp->mii_bus->irq);
mdiobus_free(bp->mii_bus);
unregister_netdev(dev);
free_irq(dev->irq, dev);
iounmap(bp->regs);
#ifndef CONFIG_ARCH_AT91
clk_disable(bp->hclk);
clk_put(bp->hclk);
#endif
clk_disable(bp->pclk);
clk_put(bp->pclk);
free_netdev(dev);
platform_set_drvdata(pdev, NULL);
}
return 0;
}
#ifdef CONFIG_PM
static int macb_suspend(struct platform_device *pdev, pm_message_t state)
{
struct net_device *netdev = platform_get_drvdata(pdev);
struct macb *bp = netdev_priv(netdev);
netif_device_detach(netdev);
#ifndef CONFIG_ARCH_AT91
clk_disable(bp->hclk);
#endif
clk_disable(bp->pclk);
return 0;
}
static int macb_resume(struct platform_device *pdev)
{
struct net_device *netdev = platform_get_drvdata(pdev);
struct macb *bp = netdev_priv(netdev);
clk_enable(bp->pclk);
#ifndef CONFIG_ARCH_AT91
clk_enable(bp->hclk);
#endif
netif_device_attach(netdev);
return 0;
}
#else
#define macb_suspend NULL
#define macb_resume NULL
#endif
static struct platform_driver macb_driver = {
.remove = __exit_p(macb_remove),
.suspend = macb_suspend,
.resume = macb_resume,
.driver = {
.name = "macb",
.owner = THIS_MODULE,
},
};
static int __init macb_init(void)
{
return platform_driver_probe(&macb_driver, macb_probe);
}
static void __exit macb_exit(void)
{
platform_driver_unregister(&macb_driver);
}
module_init(macb_init);
module_exit(macb_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Atmel MACB Ethernet driver");
MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
MODULE_ALIAS("platform:macb");