linux_old1/mm/fremap.c

265 lines
6.7 KiB
C
Raw Normal View History

/*
* linux/mm/fremap.c
*
* Explicit pagetable population and nonlinear (random) mappings support.
*
* started by Ingo Molnar, Copyright (C) 2002, 2003
*/
#include <linux/export.h>
#include <linux/backing-dev.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/file.h>
#include <linux/mman.h>
#include <linux/pagemap.h>
#include <linux/swapops.h>
#include <linux/rmap.h>
#include <linux/syscalls.h>
mmu-notifiers: core With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages. There are secondary MMUs (with secondary sptes and secondary tlbs) too. sptes in the kvm case are shadow pagetables, but when I say spte in mmu-notifier context, I mean "secondary pte". In GRU case there's no actual secondary pte and there's only a secondary tlb because the GRU secondary MMU has no knowledge about sptes and every secondary tlb miss event in the MMU always generates a page fault that has to be resolved by the CPU (this is not the case of KVM where the a secondary tlb miss will walk sptes in hardware and it will refill the secondary tlb transparently to software if the corresponding spte is present). The same way zap_page_range has to invalidate the pte before freeing the page, the spte (and secondary tlb) must also be invalidated before any page is freed and reused. Currently we take a page_count pin on every page mapped by sptes, but that means the pages can't be swapped whenever they're mapped by any spte because they're part of the guest working set. Furthermore a spte unmap event can immediately lead to a page to be freed when the pin is released (so requiring the same complex and relatively slow tlb_gather smp safe logic we have in zap_page_range and that can be avoided completely if the spte unmap event doesn't require an unpin of the page previously mapped in the secondary MMU). The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know when the VM is swapping or freeing or doing anything on the primary MMU so that the secondary MMU code can drop sptes before the pages are freed, avoiding all page pinning and allowing 100% reliable swapping of guest physical address space. Furthermore it avoids the code that teardown the mappings of the secondary MMU, to implement a logic like tlb_gather in zap_page_range that would require many IPI to flush other cpu tlbs, for each fixed number of spte unmapped. To make an example: if what happens on the primary MMU is a protection downgrade (from writeable to wrprotect) the secondary MMU mappings will be invalidated, and the next secondary-mmu-page-fault will call get_user_pages and trigger a do_wp_page through get_user_pages if it called get_user_pages with write=1, and it'll re-establishing an updated spte or secondary-tlb-mapping on the copied page. Or it will setup a readonly spte or readonly tlb mapping if it's a guest-read, if it calls get_user_pages with write=0. This is just an example. This allows to map any page pointed by any pte (and in turn visible in the primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an full MMU with both sptes and secondary-tlb like the shadow-pagetable layer with kvm), or a remote DMA in software like XPMEM (hence needing of schedule in XPMEM code to send the invalidate to the remote node, while no need to schedule in kvm/gru as it's an immediate event like invalidating primary-mmu pte). At least for KVM without this patch it's impossible to swap guests reliably. And having this feature and removing the page pin allows several other optimizations that simplify life considerably. Dependencies: 1) mm_take_all_locks() to register the mmu notifier when the whole VM isn't doing anything with "mm". This allows mmu notifier users to keep track if the VM is in the middle of the invalidate_range_begin/end critical section with an atomic counter incraese in range_begin and decreased in range_end. No secondary MMU page fault is allowed to map any spte or secondary tlb reference, while the VM is in the middle of range_begin/end as any page returned by get_user_pages in that critical section could later immediately be freed without any further ->invalidate_page notification (invalidate_range_begin/end works on ranges and ->invalidate_page isn't called immediately before freeing the page). To stop all page freeing and pagetable overwrites the mmap_sem must be taken in write mode and all other anon_vma/i_mmap locks must be taken too. 2) It'd be a waste to add branches in the VM if nobody could possibly run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of mmu notifiers, but this already allows to compile a KVM external module against a kernel with mmu notifiers enabled and from the next pull from kvm.git we'll start using them. And GRU/XPMEM will also be able to continue the development by enabling KVM=m in their config, until they submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n). This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM are all =n. The mmu_notifier_register call can fail because mm_take_all_locks may be interrupted by a signal and return -EINTR. Because mmu_notifier_reigster is used when a driver startup, a failure can be gracefully handled. Here an example of the change applied to kvm to register the mmu notifiers. Usually when a driver startups other allocations are required anyway and -ENOMEM failure paths exists already. struct kvm *kvm_arch_create_vm(void) { struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + int err; if (!kvm) return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); + kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm); + if (err) { + kfree(kvm); + return ERR_PTR(err); + } + return kvm; } mmu_notifier_unregister returns void and it's reliable. The patch also adds a few needed but missing includes that would prevent kernel to compile after these changes on non-x86 archs (x86 didn't need them by luck). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix mm/filemap_xip.c build] [akpm@linux-foundation.org: fix mm/mmu_notifier.c build] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kanoj Sarcar <kanojsarcar@yahoo.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Izik Eidus <izike@qumranet.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:29 +08:00
#include <linux/mmu_notifier.h>
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include "internal.h"
static void zap_pte(struct mm_struct *mm, struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
pte_t pte = *ptep;
if (pte_present(pte)) {
struct page *page;
flush_cache_page(vma, addr, pte_pfn(pte));
pte = ptep_clear_flush(vma, addr, ptep);
page = vm_normal_page(vma, addr, pte);
if (page) {
if (pte_dirty(pte))
set_page_dirty(page);
page_remove_rmap(page);
page_cache_release(page);
update_hiwater_rss(mm);
dec_mm_counter(mm, MM_FILEPAGES);
}
} else {
if (!pte_file(pte))
free_swap_and_cache(pte_to_swp_entry(pte));
pte_clear_not_present_full(mm, addr, ptep, 0);
}
}
/*
* Install a file pte to a given virtual memory address, release any
* previously existing mapping.
*/
static int install_file_pte(struct mm_struct *mm, struct vm_area_struct *vma,
unsigned long addr, unsigned long pgoff, pgprot_t prot)
{
int err = -ENOMEM;
pte_t *pte, ptfile;
spinlock_t *ptl;
pte = get_locked_pte(mm, addr, &ptl);
if (!pte)
goto out;
ptfile = pgoff_to_pte(pgoff);
if (!pte_none(*pte)) {
if (pte_present(*pte) && pte_soft_dirty(*pte))
pte_file_mksoft_dirty(ptfile);
zap_pte(mm, vma, addr, pte);
}
set_pte_at(mm, addr, pte, ptfile);
/*
* We don't need to run update_mmu_cache() here because the "file pte"
* being installed by install_file_pte() is not a real pte - it's a
* non-present entry (like a swap entry), noting what file offset should
* be mapped there when there's a fault (in a non-linear vma where
* that's not obvious).
*/
pte_unmap_unlock(pte, ptl);
err = 0;
out:
return err;
}
int generic_file_remap_pages(struct vm_area_struct *vma, unsigned long addr,
unsigned long size, pgoff_t pgoff)
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
{
struct mm_struct *mm = vma->vm_mm;
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
int err;
do {
err = install_file_pte(mm, vma, addr, pgoff, vma->vm_page_prot);
if (err)
return err;
size -= PAGE_SIZE;
addr += PAGE_SIZE;
pgoff++;
} while (size);
return 0;
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
}
EXPORT_SYMBOL(generic_file_remap_pages);
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
/**
* sys_remap_file_pages - remap arbitrary pages of an existing VM_SHARED vma
* @start: start of the remapped virtual memory range
* @size: size of the remapped virtual memory range
* @prot: new protection bits of the range (see NOTE)
* @pgoff: to-be-mapped page of the backing store file
* @flags: 0 or MAP_NONBLOCKED - the later will cause no IO.
*
* sys_remap_file_pages remaps arbitrary pages of an existing VM_SHARED vma
* (shared backing store file).
*
* This syscall works purely via pagetables, so it's the most efficient
* way to map the same (large) file into a given virtual window. Unlike
* mmap()/mremap() it does not create any new vmas. The new mappings are
* also safe across swapout.
*
* NOTE: the @prot parameter right now is ignored (but must be zero),
* and the vma's default protection is used. Arbitrary protections
* might be implemented in the future.
*/
SYSCALL_DEFINE5(remap_file_pages, unsigned long, start, unsigned long, size,
unsigned long, prot, unsigned long, pgoff, unsigned long, flags)
{
struct mm_struct *mm = current->mm;
struct address_space *mapping;
struct vm_area_struct *vma;
int err = -EINVAL;
int has_write_lock = 0;
vm_flags_t vm_flags = 0;
if (prot)
return err;
/*
* Sanitize the syscall parameters:
*/
start = start & PAGE_MASK;
size = size & PAGE_MASK;
/* Does the address range wrap, or is the span zero-sized? */
if (start + size <= start)
return err;
/* Does pgoff wrap? */
if (pgoff + (size >> PAGE_SHIFT) < pgoff)
return err;
/* Can we represent this offset inside this architecture's pte's? */
#if PTE_FILE_MAX_BITS < BITS_PER_LONG
if (pgoff + (size >> PAGE_SHIFT) >= (1UL << PTE_FILE_MAX_BITS))
return err;
#endif
/* We need down_write() to change vma->vm_flags. */
down_read(&mm->mmap_sem);
retry:
vma = find_vma(mm, start);
/*
* Make sure the vma is shared, that it supports prefaulting,
* and that the remapped range is valid and fully within
mm: remap_file_pages() fixes We have many vma manipulation functions that are fast in the typical case, but can optionally be instructed to populate an unbounded number of ptes within the region they work on: - mmap with MAP_POPULATE or MAP_LOCKED flags; - remap_file_pages() with MAP_NONBLOCK not set or when working on a VM_LOCKED vma; - mmap_region() and all its wrappers when mlock(MCL_FUTURE) is in effect; - brk() when mlock(MCL_FUTURE) is in effect. Current code handles these pte operations locally, while the sourrounding code has to hold the mmap_sem write side since it's manipulating vmas. This means we're doing an unbounded amount of pte population work with mmap_sem held, and this causes problems as Andy Lutomirski reported (we've hit this at Google as well, though it's not entirely clear why people keep trying to use mlock(MCL_FUTURE) in the first place). I propose introducing a new mm_populate() function to do this pte population work after the mmap_sem has been released. mm_populate() does need to acquire the mmap_sem read side, but critically, it doesn't need to hold it continuously for the entire duration of the operation - it can drop it whenever things take too long (such as when hitting disk for a file read) and re-acquire it later on. The following patches are included - Patches 1 fixes some issues I noticed while working on the existing code. If needed, they could potentially go in before the rest of the patches. - Patch 2 introduces the new mm_populate() function and changes mmap_region() call sites to use it after they drop mmap_sem. This is inspired from Andy Lutomirski's proposal and is built as an extension of the work I had previously done for mlock() and mlockall() around v2.6.38-rc1. I had tried doing something similar at the time but had given up as there were so many do_mmap() call sites; the recent cleanups by Linus and Viro are a tremendous help here. - Patches 3-5 convert some of the less-obvious places doing unbounded pte populates to the new mm_populate() mechanism. - Patches 6-7 are code cleanups that are made possible by the mm_populate() work. In particular, they remove more code than the entire patch series added, which should be a good thing :) - Patch 8 is optional to this entire series. It only helps to deal more nicely with racy userspace programs that might modify their mappings while we're trying to populate them. It adds a new VM_POPULATE flag on the mappings we do want to populate, so that if userspace replaces them with mappings it doesn't want populated, mm_populate() won't populate those replacement mappings. This patch: Assorted small fixes. The first two are quite small: - Move check for vma->vm_private_data && !(vma->vm_flags & VM_NONLINEAR) within existing if (!(vma->vm_flags & VM_NONLINEAR)) block. Purely cosmetic. - In the VM_LOCKED case, when dropping PG_Mlocked for the over-mapped range, make sure we own the mmap_sem write lock around the munlock_vma_pages_range call as this manipulates the vma's vm_flags. Last fix requires a longer explanation. remap_file_pages() can do its work either through VM_NONLINEAR manipulation or by creating extra vmas. These two cases were inconsistent with each other (and ultimately, both wrong) as to exactly when did they fault in the newly mapped file pages: - In the VM_NONLINEAR case, new file pages would be populated if the MAP_NONBLOCK flag wasn't passed. If MAP_NONBLOCK was passed, new file pages wouldn't be populated even if the vma is already marked as VM_LOCKED. - In the linear (emulated) case, the work is passed to the mmap_region() function which would populate the pages if the vma is marked as VM_LOCKED, and would not otherwise - regardless of the value of the MAP_NONBLOCK flag, because MAP_POPULATE wasn't being passed to mmap_region(). The desired behavior is that we want the pages to be populated and locked if the vma is marked as VM_LOCKED, or to be populated if the MAP_NONBLOCK flag is not passed to remap_file_pages(). Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Tested-by: Andy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 08:32:36 +08:00
* the single existing vma.
*/
if (!vma || !(vma->vm_flags & VM_SHARED))
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
goto out;
if (!vma->vm_ops || !vma->vm_ops->remap_pages)
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
goto out;
if (start < vma->vm_start || start + size > vma->vm_end)
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
goto out;
/* Must set VM_NONLINEAR before any pages are populated. */
if (!(vma->vm_flags & VM_NONLINEAR)) {
mm: remap_file_pages() fixes We have many vma manipulation functions that are fast in the typical case, but can optionally be instructed to populate an unbounded number of ptes within the region they work on: - mmap with MAP_POPULATE or MAP_LOCKED flags; - remap_file_pages() with MAP_NONBLOCK not set or when working on a VM_LOCKED vma; - mmap_region() and all its wrappers when mlock(MCL_FUTURE) is in effect; - brk() when mlock(MCL_FUTURE) is in effect. Current code handles these pte operations locally, while the sourrounding code has to hold the mmap_sem write side since it's manipulating vmas. This means we're doing an unbounded amount of pte population work with mmap_sem held, and this causes problems as Andy Lutomirski reported (we've hit this at Google as well, though it's not entirely clear why people keep trying to use mlock(MCL_FUTURE) in the first place). I propose introducing a new mm_populate() function to do this pte population work after the mmap_sem has been released. mm_populate() does need to acquire the mmap_sem read side, but critically, it doesn't need to hold it continuously for the entire duration of the operation - it can drop it whenever things take too long (such as when hitting disk for a file read) and re-acquire it later on. The following patches are included - Patches 1 fixes some issues I noticed while working on the existing code. If needed, they could potentially go in before the rest of the patches. - Patch 2 introduces the new mm_populate() function and changes mmap_region() call sites to use it after they drop mmap_sem. This is inspired from Andy Lutomirski's proposal and is built as an extension of the work I had previously done for mlock() and mlockall() around v2.6.38-rc1. I had tried doing something similar at the time but had given up as there were so many do_mmap() call sites; the recent cleanups by Linus and Viro are a tremendous help here. - Patches 3-5 convert some of the less-obvious places doing unbounded pte populates to the new mm_populate() mechanism. - Patches 6-7 are code cleanups that are made possible by the mm_populate() work. In particular, they remove more code than the entire patch series added, which should be a good thing :) - Patch 8 is optional to this entire series. It only helps to deal more nicely with racy userspace programs that might modify their mappings while we're trying to populate them. It adds a new VM_POPULATE flag on the mappings we do want to populate, so that if userspace replaces them with mappings it doesn't want populated, mm_populate() won't populate those replacement mappings. This patch: Assorted small fixes. The first two are quite small: - Move check for vma->vm_private_data && !(vma->vm_flags & VM_NONLINEAR) within existing if (!(vma->vm_flags & VM_NONLINEAR)) block. Purely cosmetic. - In the VM_LOCKED case, when dropping PG_Mlocked for the over-mapped range, make sure we own the mmap_sem write lock around the munlock_vma_pages_range call as this manipulates the vma's vm_flags. Last fix requires a longer explanation. remap_file_pages() can do its work either through VM_NONLINEAR manipulation or by creating extra vmas. These two cases were inconsistent with each other (and ultimately, both wrong) as to exactly when did they fault in the newly mapped file pages: - In the VM_NONLINEAR case, new file pages would be populated if the MAP_NONBLOCK flag wasn't passed. If MAP_NONBLOCK was passed, new file pages wouldn't be populated even if the vma is already marked as VM_LOCKED. - In the linear (emulated) case, the work is passed to the mmap_region() function which would populate the pages if the vma is marked as VM_LOCKED, and would not otherwise - regardless of the value of the MAP_NONBLOCK flag, because MAP_POPULATE wasn't being passed to mmap_region(). The desired behavior is that we want the pages to be populated and locked if the vma is marked as VM_LOCKED, or to be populated if the MAP_NONBLOCK flag is not passed to remap_file_pages(). Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Tested-by: Andy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 08:32:36 +08:00
/*
* vm_private_data is used as a swapout cursor
* in a VM_NONLINEAR vma.
*/
if (vma->vm_private_data)
goto out;
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
/* Don't need a nonlinear mapping, exit success */
if (pgoff == linear_page_index(vma, start)) {
err = 0;
goto out;
}
if (!has_write_lock) {
mm: remap_file_pages() fixes We have many vma manipulation functions that are fast in the typical case, but can optionally be instructed to populate an unbounded number of ptes within the region they work on: - mmap with MAP_POPULATE or MAP_LOCKED flags; - remap_file_pages() with MAP_NONBLOCK not set or when working on a VM_LOCKED vma; - mmap_region() and all its wrappers when mlock(MCL_FUTURE) is in effect; - brk() when mlock(MCL_FUTURE) is in effect. Current code handles these pte operations locally, while the sourrounding code has to hold the mmap_sem write side since it's manipulating vmas. This means we're doing an unbounded amount of pte population work with mmap_sem held, and this causes problems as Andy Lutomirski reported (we've hit this at Google as well, though it's not entirely clear why people keep trying to use mlock(MCL_FUTURE) in the first place). I propose introducing a new mm_populate() function to do this pte population work after the mmap_sem has been released. mm_populate() does need to acquire the mmap_sem read side, but critically, it doesn't need to hold it continuously for the entire duration of the operation - it can drop it whenever things take too long (such as when hitting disk for a file read) and re-acquire it later on. The following patches are included - Patches 1 fixes some issues I noticed while working on the existing code. If needed, they could potentially go in before the rest of the patches. - Patch 2 introduces the new mm_populate() function and changes mmap_region() call sites to use it after they drop mmap_sem. This is inspired from Andy Lutomirski's proposal and is built as an extension of the work I had previously done for mlock() and mlockall() around v2.6.38-rc1. I had tried doing something similar at the time but had given up as there were so many do_mmap() call sites; the recent cleanups by Linus and Viro are a tremendous help here. - Patches 3-5 convert some of the less-obvious places doing unbounded pte populates to the new mm_populate() mechanism. - Patches 6-7 are code cleanups that are made possible by the mm_populate() work. In particular, they remove more code than the entire patch series added, which should be a good thing :) - Patch 8 is optional to this entire series. It only helps to deal more nicely with racy userspace programs that might modify their mappings while we're trying to populate them. It adds a new VM_POPULATE flag on the mappings we do want to populate, so that if userspace replaces them with mappings it doesn't want populated, mm_populate() won't populate those replacement mappings. This patch: Assorted small fixes. The first two are quite small: - Move check for vma->vm_private_data && !(vma->vm_flags & VM_NONLINEAR) within existing if (!(vma->vm_flags & VM_NONLINEAR)) block. Purely cosmetic. - In the VM_LOCKED case, when dropping PG_Mlocked for the over-mapped range, make sure we own the mmap_sem write lock around the munlock_vma_pages_range call as this manipulates the vma's vm_flags. Last fix requires a longer explanation. remap_file_pages() can do its work either through VM_NONLINEAR manipulation or by creating extra vmas. These two cases were inconsistent with each other (and ultimately, both wrong) as to exactly when did they fault in the newly mapped file pages: - In the VM_NONLINEAR case, new file pages would be populated if the MAP_NONBLOCK flag wasn't passed. If MAP_NONBLOCK was passed, new file pages wouldn't be populated even if the vma is already marked as VM_LOCKED. - In the linear (emulated) case, the work is passed to the mmap_region() function which would populate the pages if the vma is marked as VM_LOCKED, and would not otherwise - regardless of the value of the MAP_NONBLOCK flag, because MAP_POPULATE wasn't being passed to mmap_region(). The desired behavior is that we want the pages to be populated and locked if the vma is marked as VM_LOCKED, or to be populated if the MAP_NONBLOCK flag is not passed to remap_file_pages(). Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Tested-by: Andy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 08:32:36 +08:00
get_write_lock:
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
up_read(&mm->mmap_sem);
down_write(&mm->mmap_sem);
has_write_lock = 1;
goto retry;
}
mapping = vma->vm_file->f_mapping;
/*
* page_mkclean doesn't work on nonlinear vmas, so if
* dirty pages need to be accounted, emulate with linear
* vmas.
*/
if (mapping_cap_account_dirty(mapping)) {
unsigned long addr;
struct file *file = get_file(vma->vm_file);
addr = mmap_region(file, start, size,
vma->vm_flags, pgoff);
fput(file);
if (IS_ERR_VALUE(addr)) {
err = addr;
} else {
BUG_ON(addr != start);
err = 0;
}
goto out;
}
mutex_lock(&mapping->i_mmap_mutex);
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
flush_dcache_mmap_lock(mapping);
vma->vm_flags |= VM_NONLINEAR;
vma_interval_tree_remove(vma, &mapping->i_mmap);
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
vma_nonlinear_insert(vma, &mapping->i_mmap_nonlinear);
flush_dcache_mmap_unlock(mapping);
mutex_unlock(&mapping->i_mmap_mutex);
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
}
if (vma->vm_flags & VM_LOCKED) {
/*
* drop PG_Mlocked flag for over-mapped range
*/
mm: remap_file_pages() fixes We have many vma manipulation functions that are fast in the typical case, but can optionally be instructed to populate an unbounded number of ptes within the region they work on: - mmap with MAP_POPULATE or MAP_LOCKED flags; - remap_file_pages() with MAP_NONBLOCK not set or when working on a VM_LOCKED vma; - mmap_region() and all its wrappers when mlock(MCL_FUTURE) is in effect; - brk() when mlock(MCL_FUTURE) is in effect. Current code handles these pte operations locally, while the sourrounding code has to hold the mmap_sem write side since it's manipulating vmas. This means we're doing an unbounded amount of pte population work with mmap_sem held, and this causes problems as Andy Lutomirski reported (we've hit this at Google as well, though it's not entirely clear why people keep trying to use mlock(MCL_FUTURE) in the first place). I propose introducing a new mm_populate() function to do this pte population work after the mmap_sem has been released. mm_populate() does need to acquire the mmap_sem read side, but critically, it doesn't need to hold it continuously for the entire duration of the operation - it can drop it whenever things take too long (such as when hitting disk for a file read) and re-acquire it later on. The following patches are included - Patches 1 fixes some issues I noticed while working on the existing code. If needed, they could potentially go in before the rest of the patches. - Patch 2 introduces the new mm_populate() function and changes mmap_region() call sites to use it after they drop mmap_sem. This is inspired from Andy Lutomirski's proposal and is built as an extension of the work I had previously done for mlock() and mlockall() around v2.6.38-rc1. I had tried doing something similar at the time but had given up as there were so many do_mmap() call sites; the recent cleanups by Linus and Viro are a tremendous help here. - Patches 3-5 convert some of the less-obvious places doing unbounded pte populates to the new mm_populate() mechanism. - Patches 6-7 are code cleanups that are made possible by the mm_populate() work. In particular, they remove more code than the entire patch series added, which should be a good thing :) - Patch 8 is optional to this entire series. It only helps to deal more nicely with racy userspace programs that might modify their mappings while we're trying to populate them. It adds a new VM_POPULATE flag on the mappings we do want to populate, so that if userspace replaces them with mappings it doesn't want populated, mm_populate() won't populate those replacement mappings. This patch: Assorted small fixes. The first two are quite small: - Move check for vma->vm_private_data && !(vma->vm_flags & VM_NONLINEAR) within existing if (!(vma->vm_flags & VM_NONLINEAR)) block. Purely cosmetic. - In the VM_LOCKED case, when dropping PG_Mlocked for the over-mapped range, make sure we own the mmap_sem write lock around the munlock_vma_pages_range call as this manipulates the vma's vm_flags. Last fix requires a longer explanation. remap_file_pages() can do its work either through VM_NONLINEAR manipulation or by creating extra vmas. These two cases were inconsistent with each other (and ultimately, both wrong) as to exactly when did they fault in the newly mapped file pages: - In the VM_NONLINEAR case, new file pages would be populated if the MAP_NONBLOCK flag wasn't passed. If MAP_NONBLOCK was passed, new file pages wouldn't be populated even if the vma is already marked as VM_LOCKED. - In the linear (emulated) case, the work is passed to the mmap_region() function which would populate the pages if the vma is marked as VM_LOCKED, and would not otherwise - regardless of the value of the MAP_NONBLOCK flag, because MAP_POPULATE wasn't being passed to mmap_region(). The desired behavior is that we want the pages to be populated and locked if the vma is marked as VM_LOCKED, or to be populated if the MAP_NONBLOCK flag is not passed to remap_file_pages(). Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Tested-by: Andy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 08:32:36 +08:00
if (!has_write_lock)
goto get_write_lock;
vm_flags = vma->vm_flags;
munlock_vma_pages_range(vma, start, start + size);
vma->vm_flags = vm_flags;
}
mmu-notifiers: core With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages. There are secondary MMUs (with secondary sptes and secondary tlbs) too. sptes in the kvm case are shadow pagetables, but when I say spte in mmu-notifier context, I mean "secondary pte". In GRU case there's no actual secondary pte and there's only a secondary tlb because the GRU secondary MMU has no knowledge about sptes and every secondary tlb miss event in the MMU always generates a page fault that has to be resolved by the CPU (this is not the case of KVM where the a secondary tlb miss will walk sptes in hardware and it will refill the secondary tlb transparently to software if the corresponding spte is present). The same way zap_page_range has to invalidate the pte before freeing the page, the spte (and secondary tlb) must also be invalidated before any page is freed and reused. Currently we take a page_count pin on every page mapped by sptes, but that means the pages can't be swapped whenever they're mapped by any spte because they're part of the guest working set. Furthermore a spte unmap event can immediately lead to a page to be freed when the pin is released (so requiring the same complex and relatively slow tlb_gather smp safe logic we have in zap_page_range and that can be avoided completely if the spte unmap event doesn't require an unpin of the page previously mapped in the secondary MMU). The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know when the VM is swapping or freeing or doing anything on the primary MMU so that the secondary MMU code can drop sptes before the pages are freed, avoiding all page pinning and allowing 100% reliable swapping of guest physical address space. Furthermore it avoids the code that teardown the mappings of the secondary MMU, to implement a logic like tlb_gather in zap_page_range that would require many IPI to flush other cpu tlbs, for each fixed number of spte unmapped. To make an example: if what happens on the primary MMU is a protection downgrade (from writeable to wrprotect) the secondary MMU mappings will be invalidated, and the next secondary-mmu-page-fault will call get_user_pages and trigger a do_wp_page through get_user_pages if it called get_user_pages with write=1, and it'll re-establishing an updated spte or secondary-tlb-mapping on the copied page. Or it will setup a readonly spte or readonly tlb mapping if it's a guest-read, if it calls get_user_pages with write=0. This is just an example. This allows to map any page pointed by any pte (and in turn visible in the primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an full MMU with both sptes and secondary-tlb like the shadow-pagetable layer with kvm), or a remote DMA in software like XPMEM (hence needing of schedule in XPMEM code to send the invalidate to the remote node, while no need to schedule in kvm/gru as it's an immediate event like invalidating primary-mmu pte). At least for KVM without this patch it's impossible to swap guests reliably. And having this feature and removing the page pin allows several other optimizations that simplify life considerably. Dependencies: 1) mm_take_all_locks() to register the mmu notifier when the whole VM isn't doing anything with "mm". This allows mmu notifier users to keep track if the VM is in the middle of the invalidate_range_begin/end critical section with an atomic counter incraese in range_begin and decreased in range_end. No secondary MMU page fault is allowed to map any spte or secondary tlb reference, while the VM is in the middle of range_begin/end as any page returned by get_user_pages in that critical section could later immediately be freed without any further ->invalidate_page notification (invalidate_range_begin/end works on ranges and ->invalidate_page isn't called immediately before freeing the page). To stop all page freeing and pagetable overwrites the mmap_sem must be taken in write mode and all other anon_vma/i_mmap locks must be taken too. 2) It'd be a waste to add branches in the VM if nobody could possibly run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of mmu notifiers, but this already allows to compile a KVM external module against a kernel with mmu notifiers enabled and from the next pull from kvm.git we'll start using them. And GRU/XPMEM will also be able to continue the development by enabling KVM=m in their config, until they submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n). This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM are all =n. The mmu_notifier_register call can fail because mm_take_all_locks may be interrupted by a signal and return -EINTR. Because mmu_notifier_reigster is used when a driver startup, a failure can be gracefully handled. Here an example of the change applied to kvm to register the mmu notifiers. Usually when a driver startups other allocations are required anyway and -ENOMEM failure paths exists already. struct kvm *kvm_arch_create_vm(void) { struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + int err; if (!kvm) return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); + kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm); + if (err) { + kfree(kvm); + return ERR_PTR(err); + } + return kvm; } mmu_notifier_unregister returns void and it's reliable. The patch also adds a few needed but missing includes that would prevent kernel to compile after these changes on non-x86 archs (x86 didn't need them by luck). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix mm/filemap_xip.c build] [akpm@linux-foundation.org: fix mm/mmu_notifier.c build] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kanoj Sarcar <kanojsarcar@yahoo.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Izik Eidus <izike@qumranet.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:29 +08:00
mmu_notifier_invalidate_range_start(mm, start, start + size);
err = vma->vm_ops->remap_pages(vma, start, size, pgoff);
mmu-notifiers: core With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages. There are secondary MMUs (with secondary sptes and secondary tlbs) too. sptes in the kvm case are shadow pagetables, but when I say spte in mmu-notifier context, I mean "secondary pte". In GRU case there's no actual secondary pte and there's only a secondary tlb because the GRU secondary MMU has no knowledge about sptes and every secondary tlb miss event in the MMU always generates a page fault that has to be resolved by the CPU (this is not the case of KVM where the a secondary tlb miss will walk sptes in hardware and it will refill the secondary tlb transparently to software if the corresponding spte is present). The same way zap_page_range has to invalidate the pte before freeing the page, the spte (and secondary tlb) must also be invalidated before any page is freed and reused. Currently we take a page_count pin on every page mapped by sptes, but that means the pages can't be swapped whenever they're mapped by any spte because they're part of the guest working set. Furthermore a spte unmap event can immediately lead to a page to be freed when the pin is released (so requiring the same complex and relatively slow tlb_gather smp safe logic we have in zap_page_range and that can be avoided completely if the spte unmap event doesn't require an unpin of the page previously mapped in the secondary MMU). The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know when the VM is swapping or freeing or doing anything on the primary MMU so that the secondary MMU code can drop sptes before the pages are freed, avoiding all page pinning and allowing 100% reliable swapping of guest physical address space. Furthermore it avoids the code that teardown the mappings of the secondary MMU, to implement a logic like tlb_gather in zap_page_range that would require many IPI to flush other cpu tlbs, for each fixed number of spte unmapped. To make an example: if what happens on the primary MMU is a protection downgrade (from writeable to wrprotect) the secondary MMU mappings will be invalidated, and the next secondary-mmu-page-fault will call get_user_pages and trigger a do_wp_page through get_user_pages if it called get_user_pages with write=1, and it'll re-establishing an updated spte or secondary-tlb-mapping on the copied page. Or it will setup a readonly spte or readonly tlb mapping if it's a guest-read, if it calls get_user_pages with write=0. This is just an example. This allows to map any page pointed by any pte (and in turn visible in the primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an full MMU with both sptes and secondary-tlb like the shadow-pagetable layer with kvm), or a remote DMA in software like XPMEM (hence needing of schedule in XPMEM code to send the invalidate to the remote node, while no need to schedule in kvm/gru as it's an immediate event like invalidating primary-mmu pte). At least for KVM without this patch it's impossible to swap guests reliably. And having this feature and removing the page pin allows several other optimizations that simplify life considerably. Dependencies: 1) mm_take_all_locks() to register the mmu notifier when the whole VM isn't doing anything with "mm". This allows mmu notifier users to keep track if the VM is in the middle of the invalidate_range_begin/end critical section with an atomic counter incraese in range_begin and decreased in range_end. No secondary MMU page fault is allowed to map any spte or secondary tlb reference, while the VM is in the middle of range_begin/end as any page returned by get_user_pages in that critical section could later immediately be freed without any further ->invalidate_page notification (invalidate_range_begin/end works on ranges and ->invalidate_page isn't called immediately before freeing the page). To stop all page freeing and pagetable overwrites the mmap_sem must be taken in write mode and all other anon_vma/i_mmap locks must be taken too. 2) It'd be a waste to add branches in the VM if nobody could possibly run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of mmu notifiers, but this already allows to compile a KVM external module against a kernel with mmu notifiers enabled and from the next pull from kvm.git we'll start using them. And GRU/XPMEM will also be able to continue the development by enabling KVM=m in their config, until they submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n). This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM are all =n. The mmu_notifier_register call can fail because mm_take_all_locks may be interrupted by a signal and return -EINTR. Because mmu_notifier_reigster is used when a driver startup, a failure can be gracefully handled. Here an example of the change applied to kvm to register the mmu notifiers. Usually when a driver startups other allocations are required anyway and -ENOMEM failure paths exists already. struct kvm *kvm_arch_create_vm(void) { struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + int err; if (!kvm) return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); + kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm); + if (err) { + kfree(kvm); + return ERR_PTR(err); + } + return kvm; } mmu_notifier_unregister returns void and it's reliable. The patch also adds a few needed but missing includes that would prevent kernel to compile after these changes on non-x86 archs (x86 didn't need them by luck). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix mm/filemap_xip.c build] [akpm@linux-foundation.org: fix mm/mmu_notifier.c build] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kanoj Sarcar <kanojsarcar@yahoo.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Izik Eidus <izike@qumranet.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:29 +08:00
mmu_notifier_invalidate_range_end(mm, start, start + size);
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
/*
* We can't clear VM_NONLINEAR because we'd have to do
* it after ->populate completes, and that would prevent
* downgrading the lock. (Locks can't be upgraded).
*/
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
out:
if (vma)
vm_flags = vma->vm_flags;
if (likely(!has_write_lock))
up_read(&mm->mmap_sem);
else
up_write(&mm->mmap_sem);
if (!err && ((vm_flags & VM_LOCKED) || !(flags & MAP_NONBLOCK)))
mm_populate(start, size);
return err;
}