2006-09-30 01:30:05 +08:00
|
|
|
/*
|
|
|
|
* pata_winbond.c - Winbond VLB ATA controllers
|
|
|
|
* (C) 2006 Red Hat <alan@redhat.com>
|
|
|
|
*
|
|
|
|
* Support for the Winbond 83759A when operating in advanced mode.
|
|
|
|
* Multichip mode is not currently supported.
|
|
|
|
*/
|
2006-12-12 00:14:06 +08:00
|
|
|
|
2006-09-30 01:30:05 +08:00
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/blkdev.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include <linux/libata.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
|
|
|
|
#define DRV_NAME "pata_winbond"
|
2007-05-22 08:26:38 +08:00
|
|
|
#define DRV_VERSION "0.0.3"
|
2006-09-30 01:30:05 +08:00
|
|
|
|
|
|
|
#define NR_HOST 4 /* Two winbond controllers, two channels each */
|
|
|
|
|
|
|
|
struct winbond_data {
|
|
|
|
unsigned long config;
|
|
|
|
struct platform_device *platform_dev;
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct ata_host *winbond_host[NR_HOST];
|
|
|
|
static struct winbond_data winbond_data[NR_HOST];
|
|
|
|
static int nr_winbond_host;
|
|
|
|
|
|
|
|
#ifdef MODULE
|
|
|
|
static int probe_winbond = 1;
|
|
|
|
#else
|
|
|
|
static int probe_winbond;
|
|
|
|
#endif
|
|
|
|
|
2007-04-26 15:19:27 +08:00
|
|
|
static DEFINE_SPINLOCK(winbond_lock);
|
2006-09-30 01:30:05 +08:00
|
|
|
|
|
|
|
static void winbond_writecfg(unsigned long port, u8 reg, u8 val)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&winbond_lock, flags);
|
|
|
|
outb(reg, port + 0x01);
|
|
|
|
outb(val, port + 0x02);
|
|
|
|
spin_unlock_irqrestore(&winbond_lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static u8 winbond_readcfg(unsigned long port, u8 reg)
|
|
|
|
{
|
|
|
|
u8 val;
|
|
|
|
|
|
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&winbond_lock, flags);
|
|
|
|
outb(reg, port + 0x01);
|
|
|
|
val = inb(port + 0x02);
|
|
|
|
spin_unlock_irqrestore(&winbond_lock, flags);
|
|
|
|
|
|
|
|
return val;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
|
|
{
|
|
|
|
struct ata_timing t;
|
|
|
|
struct winbond_data *winbond = ap->host->private_data;
|
|
|
|
int active, recovery;
|
|
|
|
u8 reg;
|
|
|
|
int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2);
|
|
|
|
|
|
|
|
reg = winbond_readcfg(winbond->config, 0x81);
|
2006-12-12 00:14:06 +08:00
|
|
|
|
2006-09-30 01:30:05 +08:00
|
|
|
/* Get the timing data in cycles */
|
|
|
|
if (reg & 0x40) /* Fast VLB bus, assume 50MHz */
|
|
|
|
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
|
|
|
|
else
|
|
|
|
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
|
|
|
|
|
|
|
|
active = (FIT(t.active, 3, 17) - 1) & 0x0F;
|
|
|
|
recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
|
|
|
|
timing = (active << 4) | recovery;
|
|
|
|
winbond_writecfg(winbond->config, timing, reg);
|
2006-12-12 00:14:06 +08:00
|
|
|
|
2006-09-30 01:30:05 +08:00
|
|
|
/* Load the setup timing */
|
2006-12-12 00:14:06 +08:00
|
|
|
|
2006-09-30 01:30:05 +08:00
|
|
|
reg = 0x35;
|
|
|
|
if (adev->class != ATA_DEV_ATA)
|
|
|
|
reg |= 0x08; /* FIFO off */
|
|
|
|
if (!ata_pio_need_iordy(adev))
|
|
|
|
reg |= 0x02; /* IORDY off */
|
|
|
|
reg |= (FIT(t.setup, 0, 3) << 6);
|
|
|
|
winbond_writecfg(winbond->config, timing + 1, reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2008-01-11 06:33:04 +08:00
|
|
|
static unsigned int winbond_data_xfer(struct ata_device *dev,
|
|
|
|
unsigned char *buf, unsigned int buflen, int rw)
|
2006-09-30 01:30:05 +08:00
|
|
|
{
|
2007-12-05 15:43:07 +08:00
|
|
|
struct ata_port *ap = dev->link->ap;
|
2006-09-30 01:30:05 +08:00
|
|
|
int slop = buflen & 3;
|
|
|
|
|
2007-12-05 15:43:07 +08:00
|
|
|
if (ata_id_has_dword_io(dev->id)) {
|
|
|
|
if (rw == READ)
|
2007-02-01 14:06:36 +08:00
|
|
|
ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
|
2007-12-05 15:43:07 +08:00
|
|
|
else
|
|
|
|
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
|
2006-09-30 01:30:05 +08:00
|
|
|
|
|
|
|
if (unlikely(slop)) {
|
2007-12-05 15:43:07 +08:00
|
|
|
u32 pad;
|
|
|
|
if (rw == READ) {
|
2008-01-12 22:16:14 +08:00
|
|
|
pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
|
2006-09-30 01:30:05 +08:00
|
|
|
memcpy(buf + buflen - slop, &pad, slop);
|
2007-12-05 15:43:07 +08:00
|
|
|
} else {
|
|
|
|
memcpy(&pad, buf + buflen - slop, slop);
|
|
|
|
iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
|
2006-09-30 01:30:05 +08:00
|
|
|
}
|
2007-12-05 15:43:07 +08:00
|
|
|
buflen += 4 - slop;
|
2006-09-30 01:30:05 +08:00
|
|
|
}
|
|
|
|
} else
|
2007-12-05 15:43:07 +08:00
|
|
|
buflen = ata_data_xfer(dev, buf, buflen, rw);
|
|
|
|
|
|
|
|
return buflen;
|
2006-09-30 01:30:05 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct scsi_host_template winbond_sht = {
|
|
|
|
.module = THIS_MODULE,
|
|
|
|
.name = DRV_NAME,
|
|
|
|
.ioctl = ata_scsi_ioctl,
|
|
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
|
|
.emulated = ATA_SHT_EMULATED,
|
|
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
|
|
.proc_name = DRV_NAME,
|
|
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
|
|
.slave_configure = ata_scsi_slave_config,
|
2006-11-29 11:10:46 +08:00
|
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
2006-09-30 01:30:05 +08:00
|
|
|
.bios_param = ata_std_bios_param,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct ata_port_operations winbond_port_ops = {
|
|
|
|
.set_piomode = winbond_set_piomode,
|
|
|
|
|
|
|
|
.tf_load = ata_tf_load,
|
|
|
|
.tf_read = ata_tf_read,
|
|
|
|
.check_status = ata_check_status,
|
|
|
|
.exec_command = ata_exec_command,
|
|
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
|
|
.thaw = ata_bmdma_thaw,
|
|
|
|
.error_handler = ata_bmdma_error_handler,
|
|
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
2007-03-27 13:43:42 +08:00
|
|
|
.cable_detect = ata_cable_40wire,
|
2006-09-30 01:30:05 +08:00
|
|
|
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
|
|
|
|
.data_xfer = winbond_data_xfer,
|
|
|
|
|
2008-03-25 11:22:47 +08:00
|
|
|
.irq_clear = ata_noop_irq_clear,
|
2007-01-26 15:27:58 +08:00
|
|
|
.irq_on = ata_irq_on,
|
2006-09-30 01:30:05 +08:00
|
|
|
|
2007-08-23 05:55:41 +08:00
|
|
|
.port_start = ata_sff_port_start,
|
2006-09-30 01:30:05 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* winbond_init_one - attach a winbond interface
|
|
|
|
* @type: Type to display
|
|
|
|
* @io: I/O port start
|
|
|
|
* @irq: interrupt line
|
|
|
|
* @fast: True if on a > 33Mhz VLB
|
|
|
|
*
|
|
|
|
* Register a VLB bus IDE interface. Such interfaces are PIO and we
|
|
|
|
* assume do not support IRQ sharing.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static __init int winbond_init_one(unsigned long port)
|
|
|
|
{
|
|
|
|
struct platform_device *pdev;
|
|
|
|
u8 reg;
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
|
|
|
int i, rc;
|
2006-09-30 01:30:05 +08:00
|
|
|
|
|
|
|
reg = winbond_readcfg(port, 0x81);
|
|
|
|
reg |= 0x80; /* jumpered mode off */
|
|
|
|
winbond_writecfg(port, 0x81, reg);
|
|
|
|
reg = winbond_readcfg(port, 0x83);
|
|
|
|
reg |= 0xF0; /* local control */
|
|
|
|
winbond_writecfg(port, 0x83, reg);
|
|
|
|
reg = winbond_readcfg(port, 0x85);
|
|
|
|
reg |= 0xF0; /* programmable timing */
|
|
|
|
winbond_writecfg(port, 0x85, reg);
|
|
|
|
|
|
|
|
reg = winbond_readcfg(port, 0x81);
|
2006-12-12 00:14:06 +08:00
|
|
|
|
2006-09-30 01:30:05 +08:00
|
|
|
if (!(reg & 0x03)) /* Disabled */
|
2008-01-19 23:53:55 +08:00
|
|
|
return -ENODEV;
|
2006-09-30 01:30:05 +08:00
|
|
|
|
|
|
|
for (i = 0; i < 2 ; i ++) {
|
2007-02-01 14:06:36 +08:00
|
|
|
unsigned long cmd_port = 0x1F0 - (0x80 * i);
|
2007-08-18 12:14:55 +08:00
|
|
|
unsigned long ctl_port = cmd_port + 0x206;
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
|
|
|
struct ata_host *host;
|
|
|
|
struct ata_port *ap;
|
2007-02-01 14:06:36 +08:00
|
|
|
void __iomem *cmd_addr, *ctl_addr;
|
2006-09-30 01:30:05 +08:00
|
|
|
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
|
|
|
if (!(reg & (1 << i)))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
|
|
|
|
if (IS_ERR(pdev))
|
|
|
|
return PTR_ERR(pdev);
|
|
|
|
|
|
|
|
rc = -ENOMEM;
|
|
|
|
host = ata_host_alloc(&pdev->dev, 1);
|
|
|
|
if (!host)
|
|
|
|
goto err_unregister;
|
2007-08-18 12:14:55 +08:00
|
|
|
ap = host->ports[0];
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
|
|
|
|
|
|
|
rc = -ENOMEM;
|
|
|
|
cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8);
|
2007-08-18 12:14:55 +08:00
|
|
|
ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1);
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
|
|
|
if (!cmd_addr || !ctl_addr)
|
|
|
|
goto err_unregister;
|
|
|
|
|
2007-08-18 12:14:55 +08:00
|
|
|
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port);
|
|
|
|
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
|
|
|
ap->ops = &winbond_port_ops;
|
|
|
|
ap->pio_mask = 0x1F;
|
|
|
|
ap->flags |= ATA_FLAG_SLAVE_POSS;
|
|
|
|
ap->ioaddr.cmd_addr = cmd_addr;
|
|
|
|
ap->ioaddr.altstatus_addr = ctl_addr;
|
|
|
|
ap->ioaddr.ctl_addr = ctl_addr;
|
|
|
|
ata_std_ports(&ap->ioaddr);
|
|
|
|
|
|
|
|
/* hook in a private data structure per channel */
|
|
|
|
host->private_data = &winbond_data[nr_winbond_host];
|
|
|
|
winbond_data[nr_winbond_host].config = port;
|
|
|
|
winbond_data[nr_winbond_host].platform_dev = pdev;
|
|
|
|
|
|
|
|
/* activate */
|
|
|
|
rc = ata_host_activate(host, 14 + i, ata_interrupt, 0,
|
|
|
|
&winbond_sht);
|
|
|
|
if (rc)
|
|
|
|
goto err_unregister;
|
|
|
|
|
|
|
|
winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev);
|
2006-09-30 01:30:05 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
|
|
|
|
|
|
|
err_unregister:
|
|
|
|
platform_device_unregister(pdev);
|
|
|
|
return rc;
|
2006-09-30 01:30:05 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* winbond_init - attach winbond interfaces
|
|
|
|
*
|
|
|
|
* Attach winbond IDE interfaces by scanning the ports it may occupy.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static __init int winbond_init(void)
|
|
|
|
{
|
|
|
|
static const unsigned long config[2] = { 0x130, 0x1B0 };
|
|
|
|
|
|
|
|
int ct = 0;
|
|
|
|
int i;
|
2006-12-12 00:14:06 +08:00
|
|
|
|
2006-09-30 01:30:05 +08:00
|
|
|
if (probe_winbond == 0)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check both base addresses
|
|
|
|
*/
|
|
|
|
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
|
|
if (probe_winbond & (1<<i)) {
|
|
|
|
int ret = 0;
|
|
|
|
unsigned long port = config[i];
|
|
|
|
|
|
|
|
if (request_region(port, 2, "pata_winbond")) {
|
|
|
|
ret = winbond_init_one(port);
|
2007-10-26 08:47:30 +08:00
|
|
|
if (ret <= 0)
|
2006-09-30 01:30:05 +08:00
|
|
|
release_region(port, 2);
|
|
|
|
else ct+= ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (ct != 0)
|
|
|
|
return 0;
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
static __exit void winbond_exit(void)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < nr_winbond_host; i++) {
|
2007-01-20 15:00:28 +08:00
|
|
|
ata_host_detach(winbond_host[i]);
|
2006-09-30 01:30:05 +08:00
|
|
|
release_region(winbond_data[i].config, 2);
|
|
|
|
platform_device_unregister(winbond_data[i].platform_dev);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
|
|
MODULE_DESCRIPTION("low-level driver for Winbond VL ATA");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
|
|
|
|
module_init(winbond_init);
|
|
|
|
module_exit(winbond_exit);
|
|
|
|
|
|
|
|
module_param(probe_winbond, int, 0);
|
|
|
|
|