linux_old1/lib/lzo/lzo1x_decompress_safe.c

258 lines
4.9 KiB
C
Raw Normal View History

/*
* LZO1X Decompressor from LZO
*
* Copyright (C) 1996-2012 Markus F.X.J. Oberhumer <markus@oberhumer.com>
*
* The full LZO package can be found at:
* http://www.oberhumer.com/opensource/lzo/
*
* Changed for Linux kernel use by:
* Nitin Gupta <nitingupta910@gmail.com>
* Richard Purdie <rpurdie@openedhand.com>
*/
lib: add support for LZO-compressed kernels This patch series adds generic support for creating and extracting LZO-compressed kernel images, as well as support for using such images on the x86 and ARM architectures, and support for creating and using LZO-compressed initrd and initramfs images. Russell King said: : Testing on a Cortex A9 model: : - lzo decompressor is 65% of the time gzip takes to decompress a kernel : - lzo kernel is 9% larger than a gzip kernel : : which I'm happy to say confirms your figures when comparing the two. : : However, when comparing your new gzip code to the old gzip code: : - new is 99% of the size of the old code : - new takes 42% of the time to decompress than the old code : : What this means is that for a proper comparison, the results get even better: : - lzo is 7.5% larger than the old gzip'd kernel image : - lzo takes 28% of the time that the old gzip code took : : So the expense seems definitely worth the effort. The only reason I : can think of ever using gzip would be if you needed the additional : compression (eg, because you have limited flash to store the image.) : : I would argue that the default for ARM should therefore be LZO. This patch: The lzo compressor is worse than gzip at compression, but faster at extraction. Here are some figures for an ARM board I'm working on: Uncompressed size: 3.24Mo gzip 1.61Mo 0.72s lzo 1.75Mo 0.48s So for a compression ratio that is still relatively close to gzip, it's much faster to extract, at least in that case. This part contains: - Makefile routine to support lzo compression - Fixes to the existing lzo compressor so that it can be used in compressed kernels - wrapper around the existing lzo1x_decompress, as it only extracts one block at a time, while we need to extract a whole file here - config dialog for kernel compression [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: cleanup] Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-09 06:42:42 +08:00
#ifndef STATIC
#include <linux/module.h>
#include <linux/kernel.h>
lib: add support for LZO-compressed kernels This patch series adds generic support for creating and extracting LZO-compressed kernel images, as well as support for using such images on the x86 and ARM architectures, and support for creating and using LZO-compressed initrd and initramfs images. Russell King said: : Testing on a Cortex A9 model: : - lzo decompressor is 65% of the time gzip takes to decompress a kernel : - lzo kernel is 9% larger than a gzip kernel : : which I'm happy to say confirms your figures when comparing the two. : : However, when comparing your new gzip code to the old gzip code: : - new is 99% of the size of the old code : - new takes 42% of the time to decompress than the old code : : What this means is that for a proper comparison, the results get even better: : - lzo is 7.5% larger than the old gzip'd kernel image : - lzo takes 28% of the time that the old gzip code took : : So the expense seems definitely worth the effort. The only reason I : can think of ever using gzip would be if you needed the additional : compression (eg, because you have limited flash to store the image.) : : I would argue that the default for ARM should therefore be LZO. This patch: The lzo compressor is worse than gzip at compression, but faster at extraction. Here are some figures for an ARM board I'm working on: Uncompressed size: 3.24Mo gzip 1.61Mo 0.72s lzo 1.75Mo 0.48s So for a compression ratio that is still relatively close to gzip, it's much faster to extract, at least in that case. This part contains: - Makefile routine to support lzo compression - Fixes to the existing lzo compressor so that it can be used in compressed kernels - wrapper around the existing lzo1x_decompress, as it only extracts one block at a time, while we need to extract a whole file here - config dialog for kernel compression [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: cleanup] Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-09 06:42:42 +08:00
#endif
#include <asm/unaligned.h>
lib: add support for LZO-compressed kernels This patch series adds generic support for creating and extracting LZO-compressed kernel images, as well as support for using such images on the x86 and ARM architectures, and support for creating and using LZO-compressed initrd and initramfs images. Russell King said: : Testing on a Cortex A9 model: : - lzo decompressor is 65% of the time gzip takes to decompress a kernel : - lzo kernel is 9% larger than a gzip kernel : : which I'm happy to say confirms your figures when comparing the two. : : However, when comparing your new gzip code to the old gzip code: : - new is 99% of the size of the old code : - new takes 42% of the time to decompress than the old code : : What this means is that for a proper comparison, the results get even better: : - lzo is 7.5% larger than the old gzip'd kernel image : - lzo takes 28% of the time that the old gzip code took : : So the expense seems definitely worth the effort. The only reason I : can think of ever using gzip would be if you needed the additional : compression (eg, because you have limited flash to store the image.) : : I would argue that the default for ARM should therefore be LZO. This patch: The lzo compressor is worse than gzip at compression, but faster at extraction. Here are some figures for an ARM board I'm working on: Uncompressed size: 3.24Mo gzip 1.61Mo 0.72s lzo 1.75Mo 0.48s So for a compression ratio that is still relatively close to gzip, it's much faster to extract, at least in that case. This part contains: - Makefile routine to support lzo compression - Fixes to the existing lzo compressor so that it can be used in compressed kernels - wrapper around the existing lzo1x_decompress, as it only extracts one block at a time, while we need to extract a whole file here - config dialog for kernel compression [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: cleanup] Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-09 06:42:42 +08:00
#include <linux/lzo.h>
#include "lzodefs.h"
#define HAVE_IP(t, x) \
(((size_t)(ip_end - ip) >= (size_t)(t + x)) && \
(((t + x) >= t) && ((t + x) >= x)))
#define HAVE_OP(t, x) \
(((size_t)(op_end - op) >= (size_t)(t + x)) && \
(((t + x) >= t) && ((t + x) >= x)))
#define NEED_IP(t, x) \
do { \
if (!HAVE_IP(t, x)) \
goto input_overrun; \
} while (0)
#define NEED_OP(t, x) \
do { \
if (!HAVE_OP(t, x)) \
goto output_overrun; \
} while (0)
#define TEST_LB(m_pos) \
do { \
if ((m_pos) < out) \
goto lookbehind_overrun; \
} while (0)
int lzo1x_decompress_safe(const unsigned char *in, size_t in_len,
unsigned char *out, size_t *out_len)
{
unsigned char *op;
const unsigned char *ip;
size_t t, next;
size_t state = 0;
const unsigned char *m_pos;
const unsigned char * const ip_end = in + in_len;
unsigned char * const op_end = out + *out_len;
op = out;
ip = in;
if (unlikely(in_len < 3))
goto input_overrun;
if (*ip > 17) {
t = *ip++ - 17;
if (t < 4) {
next = t;
goto match_next;
}
goto copy_literal_run;
}
for (;;) {
t = *ip++;
if (t < 16) {
if (likely(state == 0)) {
if (unlikely(t == 0)) {
while (unlikely(*ip == 0)) {
t += 255;
ip++;
NEED_IP(1, 0);
}
t += 15 + *ip++;
}
t += 3;
copy_literal_run:
#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
if (likely(HAVE_IP(t, 15) && HAVE_OP(t, 15))) {
const unsigned char *ie = ip + t;
unsigned char *oe = op + t;
do {
COPY8(op, ip);
op += 8;
ip += 8;
COPY8(op, ip);
op += 8;
ip += 8;
} while (ip < ie);
ip = ie;
op = oe;
} else
#endif
{
NEED_OP(t, 0);
NEED_IP(t, 3);
do {
*op++ = *ip++;
} while (--t > 0);
}
state = 4;
continue;
} else if (state != 4) {
next = t & 3;
m_pos = op - 1;
m_pos -= t >> 2;
m_pos -= *ip++ << 2;
TEST_LB(m_pos);
NEED_OP(2, 0);
op[0] = m_pos[0];
op[1] = m_pos[1];
op += 2;
goto match_next;
} else {
next = t & 3;
m_pos = op - (1 + M2_MAX_OFFSET);
m_pos -= t >> 2;
m_pos -= *ip++ << 2;
t = 3;
}
} else if (t >= 64) {
next = t & 3;
m_pos = op - 1;
m_pos -= (t >> 2) & 7;
m_pos -= *ip++ << 3;
t = (t >> 5) - 1 + (3 - 1);
} else if (t >= 32) {
t = (t & 31) + (3 - 1);
if (unlikely(t == 2)) {
while (unlikely(*ip == 0)) {
t += 255;
ip++;
NEED_IP(1, 0);
}
t += 31 + *ip++;
NEED_IP(2, 0);
}
m_pos = op - 1;
next = get_unaligned_le16(ip);
ip += 2;
m_pos -= next >> 2;
next &= 3;
} else {
m_pos = op;
m_pos -= (t & 8) << 11;
t = (t & 7) + (3 - 1);
if (unlikely(t == 2)) {
while (unlikely(*ip == 0)) {
t += 255;
ip++;
NEED_IP(1, 0);
}
t += 7 + *ip++;
NEED_IP(2, 0);
}
next = get_unaligned_le16(ip);
ip += 2;
m_pos -= next >> 2;
next &= 3;
if (m_pos == op)
goto eof_found;
m_pos -= 0x4000;
}
TEST_LB(m_pos);
#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
if (op - m_pos >= 8) {
unsigned char *oe = op + t;
if (likely(HAVE_OP(t, 15))) {
do {
COPY8(op, m_pos);
op += 8;
m_pos += 8;
COPY8(op, m_pos);
op += 8;
m_pos += 8;
} while (op < oe);
op = oe;
if (HAVE_IP(6, 0)) {
state = next;
COPY4(op, ip);
op += next;
ip += next;
continue;
}
} else {
NEED_OP(t, 0);
do {
*op++ = *m_pos++;
} while (op < oe);
}
} else
#endif
{
unsigned char *oe = op + t;
NEED_OP(t, 0);
op[0] = m_pos[0];
op[1] = m_pos[1];
op += 2;
m_pos += 2;
do {
*op++ = *m_pos++;
} while (op < oe);
}
match_next:
state = next;
t = next;
#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
if (likely(HAVE_IP(6, 0) && HAVE_OP(4, 0))) {
COPY4(op, ip);
op += t;
ip += t;
} else
#endif
{
NEED_IP(t, 3);
NEED_OP(t, 0);
while (t > 0) {
*op++ = *ip++;
t--;
}
}
}
eof_found:
*out_len = op - out;
return (t != 3 ? LZO_E_ERROR :
ip == ip_end ? LZO_E_OK :
ip < ip_end ? LZO_E_INPUT_NOT_CONSUMED : LZO_E_INPUT_OVERRUN);
input_overrun:
*out_len = op - out;
return LZO_E_INPUT_OVERRUN;
output_overrun:
*out_len = op - out;
return LZO_E_OUTPUT_OVERRUN;
lookbehind_overrun:
*out_len = op - out;
return LZO_E_LOOKBEHIND_OVERRUN;
}
lib: add support for LZO-compressed kernels This patch series adds generic support for creating and extracting LZO-compressed kernel images, as well as support for using such images on the x86 and ARM architectures, and support for creating and using LZO-compressed initrd and initramfs images. Russell King said: : Testing on a Cortex A9 model: : - lzo decompressor is 65% of the time gzip takes to decompress a kernel : - lzo kernel is 9% larger than a gzip kernel : : which I'm happy to say confirms your figures when comparing the two. : : However, when comparing your new gzip code to the old gzip code: : - new is 99% of the size of the old code : - new takes 42% of the time to decompress than the old code : : What this means is that for a proper comparison, the results get even better: : - lzo is 7.5% larger than the old gzip'd kernel image : - lzo takes 28% of the time that the old gzip code took : : So the expense seems definitely worth the effort. The only reason I : can think of ever using gzip would be if you needed the additional : compression (eg, because you have limited flash to store the image.) : : I would argue that the default for ARM should therefore be LZO. This patch: The lzo compressor is worse than gzip at compression, but faster at extraction. Here are some figures for an ARM board I'm working on: Uncompressed size: 3.24Mo gzip 1.61Mo 0.72s lzo 1.75Mo 0.48s So for a compression ratio that is still relatively close to gzip, it's much faster to extract, at least in that case. This part contains: - Makefile routine to support lzo compression - Fixes to the existing lzo compressor so that it can be used in compressed kernels - wrapper around the existing lzo1x_decompress, as it only extracts one block at a time, while we need to extract a whole file here - config dialog for kernel compression [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: cleanup] Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-09 06:42:42 +08:00
#ifndef STATIC
EXPORT_SYMBOL_GPL(lzo1x_decompress_safe);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("LZO1X Decompressor");
lib: add support for LZO-compressed kernels This patch series adds generic support for creating and extracting LZO-compressed kernel images, as well as support for using such images on the x86 and ARM architectures, and support for creating and using LZO-compressed initrd and initramfs images. Russell King said: : Testing on a Cortex A9 model: : - lzo decompressor is 65% of the time gzip takes to decompress a kernel : - lzo kernel is 9% larger than a gzip kernel : : which I'm happy to say confirms your figures when comparing the two. : : However, when comparing your new gzip code to the old gzip code: : - new is 99% of the size of the old code : - new takes 42% of the time to decompress than the old code : : What this means is that for a proper comparison, the results get even better: : - lzo is 7.5% larger than the old gzip'd kernel image : - lzo takes 28% of the time that the old gzip code took : : So the expense seems definitely worth the effort. The only reason I : can think of ever using gzip would be if you needed the additional : compression (eg, because you have limited flash to store the image.) : : I would argue that the default for ARM should therefore be LZO. This patch: The lzo compressor is worse than gzip at compression, but faster at extraction. Here are some figures for an ARM board I'm working on: Uncompressed size: 3.24Mo gzip 1.61Mo 0.72s lzo 1.75Mo 0.48s So for a compression ratio that is still relatively close to gzip, it's much faster to extract, at least in that case. This part contains: - Makefile routine to support lzo compression - Fixes to the existing lzo compressor so that it can be used in compressed kernels - wrapper around the existing lzo1x_decompress, as it only extracts one block at a time, while we need to extract a whole file here - config dialog for kernel compression [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: cleanup] Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-09 06:42:42 +08:00
#endif